Operation Manual

Adding Effects and Shooting
73
Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose Y.
z Follow Steps 1 – 2 on p. 64 to choose Y.
Touch .
X The unchanged image and the Color Swap
image will alternately display.
z The default setting is to change green to
gray.
Specify the color to be swapped.
z Position the center frame so it is filled with
the color you want and touch the left frame
that appears in the lower left of the screen.
X The specified color will be recorded.
Specify the target color.
z Position the center frame so it is filled with
the color you want and touch the right
frame that appears in the lower left of the
screen.
X The specified color will be recorded.
Specify the range of colors to be
swapped.
z Touch op to change the range of colors
to be retained.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Touching Ú restores the shooting screen.