ENGLISH Canon D I C I ✓ S Tj\ L US 750 Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Viewing Images on a TV set Customizing the Camera Troubleshooting List of Messages Appendix Advanced Camera User Guide This guide explains camera features and procedures in detail. mQ\c\\ UtS PictBridae DIRECT BUBBLE JET tAI# PRim" DIREQ rnni ■.
Main Features Shooting Automatically adjusts shooting settings to match particular conditions (Special Scene mode) Automatically detects camera orientation with an Intelligent Orientation sensor^ Changes image colors to create special effects (My Colors modes) Playback Plays movies with sound Auto plays slideshows Editing ► Records sound memos for still images ► Edits movies aF=?<<> 1 Printing Makes printing easy with the Print/Share button Also supports non-Canon brand PictBridge compliant printers U
Conventions Used in this Guide Icons appearing below titles indicate the modes in which the procedure can be used. CD Using the Self-Timer Shooting Mode SCN Hll 0 U? cQ See Functions Available in Each Shooting Mode (p.123) In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. O This mark denotes issues that may affect the camera’s operation.
Table of Contents Items marked with alir are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide .......................................... . .¥.l1 Handling Precautions .4 ....................................................................5 Please Read ............................................................................. 5 Safety Precautions ................................................................... 6 Preventing Malfunctions ......................
Switching between Focusing Modes ...................................... 46 Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) . . .47 Locking the Exposure Setting (AE Lock).................................. 48 Locking the Flash Exposure Setting (FE Lock) ........................49 Switching between Metering Modes .......................................50 Adjusting the Exposure Compensation .................................. 51 Shooting in Long Shutter Mode ...............................................
Viewing Images on a TV set..................................................... 89 Customizing the Camera (My Camera Settings).................... 90 Changing My Camera Settings ...................................................................... 90 Registering My Camera Settings................................................................... 91 Troubleshooting ....................................................................... 93 Camera ............................................................
Handling Precautions Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Camera Body T e m p e r a t u r e * ' I# if ре camera Ш used for prolonged periodsrthe camera body «may become warm. Please be aware of this and take care when operating the camera for an extended period., ^ Ш I^ i 1 About the LCD Monitor ^ The LCD monitor is produced with extremely high-pfecisioop: manufacturing techniques. More than^99.99% of the pixels'^* operate to specification. Less than 0.
A Warnings Equipment • Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. • Store this equipment out of the reach of children and infants. Accidental damage by a child could result in serious injury. • Wrist strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: It may be swallowed accidentally. If this occurs, contact a doctor immediately.
Battery • Do not place the battery near a heat source or expose it to direct flame or heat. • The battery should not be immersed in water or sea water. • Do not attempt to disassemble, alter or apply heat to the battery. • Avoid dropping or subjecting the battery to severe impacts that could damage the casing. • Use only recommended battery and accessories. Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
others • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. • Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working.
Flash • Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. • Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash. • Do not touch the surface of the flash after taking several pictures in rapid succession. Doing so could result in burns.
Preventing Malfunctions Avoid Strong Magnetic Fields • Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Before Using the Camera—The Components Guide Front View Attaching the Wrist Strap ® A/V OUT (AudioA/ideo output) Terminal (p. 89) (1) DIGITAL Terminal {Basic Guide p. 19) d) Terminal Cover {Basic Guide p. 19) ® Wrist Strap Mount d) Microphone (p. 76) ® AF-assist Beam (p. 28) ® Red-Eye Reduction Lamp {Basic Guide p. 9) ® Self-Timer Lamp (p. 40) @ Viewfinder Window (p. 21) ® Flash {Basic Guide p. 9) ® Lens 41 12 The interface cable and AV cable cannot be connected simultaneously.
Back View w 5' (Q
Operation Panel ® Speaker (f) Indicators (p. 22) d) Power Button {Basic Guide p. 5) ® Power Lamp (S) Zoom Lever (p. 69, Basic Guide p. 8) Shooting: [^3 (Wide Angle)/ M (Telephoto) Playback; K (Index)/ Q (Magnify) Shutter Button {Basic Guide p. 5) ® ® (§) Mode Dial {Basic Guide p. 5, 6) (Print/Share) Button {Basic Guide p. 14) DISP. (Display) Button (p. 15) FUNC./SET (Function/Set) Button (p. 26) MENU Button (p. 27) ^ (Macro)/ i4 (Infinity)/ 4 Button {Basic Guide p.
Before Using the Camera—Basic Operations Using the LCD Monitor Press •The display mode changes as follows with each press. Shooting Mode (^, ^M, SCN or *■) (H) > Standard Standard Playback Mode (No Information) 4 Detailed Detailed (Information View) - Off w 5' (Q — No Information (D 0 0) Hn the shooting modes, the shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode.
Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET button down while turning on the power. Method 2 In a shooting mode, hold the FUNC./SET button down continuously. If you hold the camera horizontally, it displays the time. If you hold it vertically, the time and date display.
LCD Monitor Brightness LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways. •Changing Settings Using the Set up Menu (p. 30) •Changing Settings Using the DISP. Button (Quick-bright LCD Function) You can set the LCD monitor to the brightest setting regardless of the option selected in the Set up menu by pressing the DISP button for more than one second.* - To restore the previous brightness setting, press the DISP button for more than one second again.
Information Displayed on the LCD Monitor Shooting Information (Shooting mode) I ISO I [ ] Spot AE Point Frame I ISO! I ISO I I ISO I iSM IPM ieftin ISO Speed (p. 64) □ * AF Frame (p. 46) Shooting Method (p. 38, 40) ¡3* Low Battery (p. 105) pZoom Magnification* (p. 37) Grid Lines* (p. 28) HD Macro/Infinity {Basic Guide p. 10^ Flash {Basic Guide p. 9) B B El Auto Rotate (p. 65) • (Red)* Movie Recording (p. 42) Stills: Recordable Shots Movies (Sec.): Remaining Time/ Elapsed Time ^AE Lock (p.
If the indicator blinks orange and the camera shake icon displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Raise the ISO speed (p. 64) or select a setting other than ^ (flash off), or attach the camera to a tripod or other device. Playback Information (Playback Mode) Standard IS WAVE Format Sound (p. 76) CD Folder Number-File Number (D O (D Shooting Date/Time W 5' (Q (O Protection Status (p.
Detailed Histogram fJ0100-0001 ■■mm IPPP^ Exposure Compensation (p. 51) Flash {Basic Guide p. 9) E3 n Macro/Infinity {Basic Guide p. 10) MM Photo Effect (p. 57) Shooting Mode {Basic Guide p. 6, p. 35, 36, 42, 44, 58) My Colors (p. 58) mill SI Long Shutter Mode (p. 52) Metering Mode (p. 50) liSOBili] [iSOEIili] IM50 moo ISO Speed (p. 64) White Balance (p. 54) ra Hg lii] Resolution (Movies) (p. 34) File Size Resolution (Still Images) (p. 32) Frame Rate (Movies) (p.
Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 51).
Indicators The indicators light or blink when the power button or the shutter button is pressed. Never do the following while an indicator is lit. These actions may corrupt image data.
Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. O Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. (Set up) Menu ^[Format]. See Menus and Settings (p. 27). Power Saving,., Time Zone... H Date/Tiie.. 08.0B.
Setting the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting the Home/World Time Zones 1 in(Set up) Menu ^ [Time Zone]^ See Menus and Settings (p. 27). Mute Volume- Off LCB Brightness 2 hmmmk Tims Zone f| 08.08.
Use the 4 or ^ button to select a destina tion time zone^^^. •As in Step 3, you can set the day- Time Difference from the light saving option. Home Time Zone | 7^ 08.08.2005 23:00 + 54:00 Tokyo EOOK -tSmi Cancel 6 Use the 4^ or ^ button to select [Home/ World], and the 4 or 4 button to select n CO CD O CD W Switching to the Destination Time Zone d' (Q S’ 1 D1 up) Menu ^[Time Zone]^ See Menus and Settings (p. 27).
Menus and Settings Menus are used to set the shooting and playback settings as well as such camera settings as the date/time and electronic beep. The following menus are available. •FUNC. Menu •Rec., Play, Set up and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions. ® Turn the mode dial to ^M, SCN or Press the FUNC./SET button. (D Use the 4 ^ or ^ button to select a menu item. (D Some items may not be selectable in some shooting modes.
Rec., Play, Set up and My Camera Menus Convenient settings for shooting or playback can be set with these menus. H (Rec.) Menu - Ri (Set up) Menu S (Play) Menu — Ea (My Camera) Menu B You can switch between menus with the or ^ button when this part is selected. w 5' (O This example shows the Rec. menu. In playback mode, the Play menu displays. (D 0 Q) 3 Press the MENU button. Use the ^ or ^ button to switch between menus. You can also use the zoom lever to switch between menus.
Menu List FUNC. Menu The icons shown below are the default settings. Menu Item m Page Manual Mode p. 35 Special Scene Mode p. 35 Menu Item My Colors p. 58 ¡5j Stitch Assist p. 44 Metering Mode p. 50 IP SI D H Movie Mode p. 42 Exposure Compensation p. 51 □ Compression p. 32 Long Shutter Mode p. 52 H Frame Rate (Movie) p. 34 White Balance p. 54 Resolution (Still Image) p. 32 M Photo Effect p. 57 D a Rec. Menu Resolution (Movie) p.
Play Menu Menu Item Page Menu Item Page Protect p. 82 Slide Show p. 78 Rotate p. 75 Print Order p. 83 à Sound Memo p. 76 Transfer Order p. 87 El Erase All p. 82 Transition p. 76 0 El Set up Menu Menu Item Mute Volume Start-up Vol. Operation Vol. Selftimer Vol. Default setting Options On/Off* Off/1/2*/3/4/5 Page/Topic Set to [On] to silence the start-up, operation, self-timer and shutter sounds all at once. However, warnings still sound even when the mute is set to [On].
LCD Brightness -7 to 0* to +7 Power Saving Use the ^ or ^ button to adjust the brightness. If you press the 4^ or button, the display returns to the Set up menu. You can check the brightness in the LCD monitor while you are adjusting the setting. P-22 Auto Power Down OnVOff Sets whether or not the camera automatically powers down after a set period of time elapses without the camera being operated. Display Off 10 sec./20 sec./ 30 sec./1 min.*/ 2 min./3min.
My Camera Menu Menu Item Default setting Available Settings Theme Selects a common theme for each My Camera settings item. Start-up Image Sets the image displayed when the camera power is turned on. Start-up Sound Sets the sound played when the camera power is turned on. Operation Sound Sets the sound played when any button other than the shutter button is pressed. Selftimer Sound Shutter Sound My Camera Menu Contents Page p.
Shooting Changing the Resolution and Compression (Still Images) Shooting Mode | Ci ||Qivt||scN|3 0 U? eSJ FUNC. Menu^B* (Resolution)/Q* (Com pression). See Menus and Settings (p. 26). * Default setting. •Use the 4 or 4” button to select resolution/compression settings and press the FUNC./SET button.
Approximate Values for Compression Settings Compression rn Superfine n Fine Purpose High Quality t n Normal Normal Shoot higher quality images Shoot normal quality images Shoot more images See Image Data Sizes (Estimated) (p. 118). See Memory Cards and Estimated Capacities (p. 117).
Changing Resolutions and Frame Rates (Movies) Shooting Mode You can change the resolution and frame rate when the movie mode is set to g] (Standard) or ^ (My Colors). 1 FUNC. Menu^g* ( R e s o l u t i o n ) / ( F r a m e Rate). See Menus and Settings (p. 26). *Default setting. • Use the 4 or 4- button to select a resolution/frame rate and press the FUNC./SET button. Resolutions and Frame Rates Frame Rate (frames/sec.
SCN Shooting in a Special Scene Mode Shooting Mode SCN You can take an optimal picture simply by selecting the appropriate shooting mode. 1 FUNC. Menu^i^* (Portrait). See Menus and Settings (p. 26). *Default setting. • Use the 4 or button to select a shooting mode and press the FUNC./SET button. •See the Basic Guide (p. 7) for explanations of the Special Scene modes. 2 J Portrait ,L # S ^ ^ ^► (/) o o Shoot.
Magnified Ciose-Up Shooting (Digital Macro) Shooting Mode om You can shoot a subject from as close as 5 cm (2.0 in.) (minimum focal distance) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 14 x 11 mm (0.55 x 0.43 in.) at maximum zoom (approximately 4 times). FUNC. Menu^ Q| (Manual)^ (Digital Macro). See Menus and Settings (p. 26). 2 Choose the angle of view with the zoom lever and shoot.
Using the Digital Zoom Shooting Mode Q ||om SCN You can shoot zoomed images using the combined digital and optical zooms. •Stills: zoom up to approximately 12 times • Movies (Standard): zoom up to approximately 12 times The digital zoom cannot be used when the LCD monitor is turned off. M (Rec.) Menu ^[Digital Zoom]^[On]. See Menus and Settings (p. 27). C/) o o 3‘ (D ; Grid Lin® 2 Press the zoom lever toward and shoot. •The combined digital and optical zoom setting will display in the LCD monitor.
Qi Continuous S Shooting Mode 31 In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 117). *Recommended Memory Card Super high speed SDC-512 MSH memory card (sold separately) immediately after a low level format (p. 23). • This reflects standard shooting criteria established by Canon.
Postcard Date Imprint Mode Shooting Mode [O SCN 31 You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. 7 FUNC. Menu^Ip* (Resolution) (Post Card Date Imprint). See Menus and Settings (p. 26). *Default setting. •The resolution is set to [¡0 (1600 X 1200) and the compression to □ (Fine). •When you press the shutter but ton halfway, the area that will not get printed grays out.
o Ensure that the camera’s date/time is set beforehand (p. 30). The date stamp cannot be deleted from the image data once it has been set. 0 Using the Self-Timer Shooting Mode 1^1^ SCN 0<$?№ You can set a 10 sec. (^) or 2 sec. delay ), or a custom delay time and the number of shots Custom Timer), for shooting after the shutter button is pressed. Press the 0 button to display or Shoot. >When the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink.
Changing the Delay Time and Number of Shots ([^). You can change the delay time (0-10, 15, 20, 30 sec.) and number of shots (1-10). These settings, however, cannot be set for the Stitch Assist mode, movie mode or My Colors modes. M (Rec.) Menu^[Self-timer]^@^ See Menus and Settings (p. 27). Digital Zoom Off Review 2 sec. Grid Lines Off 2 Change [Delay]/[Shots] ^ @. •The self-timer sound will behave as follows. o o Custom Timer 5’ (Q - The self-timer sound will start 2 sec.
The following four movie modes are available. Q Standard You can select the resolution and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p. 37) • Resolution: H (^40 x 480), • Frame Rate: (320 x 240) (30 frames/sec.), (15 frames/sec.) • Maximum Size: 1 GB/movie fy Fast Frame Rate Use this mode to record fast moving subjects, such as in sports photography.
FUNC. Menu^B* (Standard). See Menus and Settings (p. 26). *Default setting. • Use the or 4- button to select a movie mode and press the FUNC./SET button. mode, you can >ln B or E change the resolution and frame rate (p. 34). Shoot. • Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. • Pressing the shutter button fully starts recording video and sound simultaneously. • During shooting the recording time (in seconds) and [•Rec] appear on the LCD monitor.
Before recording, you can set the AE lock (p. 48) and exposure shift. 1. Press the ISO button. The exposure will lock (AE lock) and the exposure shift bar will appear in the LCD monitor. 2. Use the 4 or button to adjust the exposure. Press the ISO button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, photo effect or shooting mode settings. QuickTime 3.
1 FUNC. Menu^ Q* ( M a n u a l ) ( S t i t c h Assist). See Menus and Settings (p. 26). *Default setting. •You can select from the following two shooting directions. - 0 Left to right horizontally - @ Right to left horizontally 2 Shoot the first image in the sequence. •The exposure and white balance are set and locked with the first image. (/) Compose the second image so that it over laps a portion of the first and shoot.
Switching between Focusing Modes Shooting Mode |^[^rBI •t* «S’ You can select between the following two focusing modes according to the AiAF setting. (No frame) The camera detects the subject and highlights the AF On frames, from 9 available points, that it will use to determine the focus. □ The camera focuses using the center AF frame. This is Off convenient for focusing on a specific part of a subject with greater certainty. i [7] (Rec.) Menu ^ [AiAF] ► [On]/[Off]. See Menus and Settings (p. 27).
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Shooting Mode [O SCN Q|| It may be difficult to focus on the following types of subjects. •Subjects with extremely low contrast to the surroundings •Scenes with a mixture of near and far subjects. •Subjects with extremely bright objects at the center of the composition •Subjects that are moving quickly •Subjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass.
4 Re-aim the camera to compose the shot as desired and shoot. To Release the AF Lock Press the □1 button. When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 28) makes shooting easier since the camera focuses using the center AF frame only. The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective after the picture is taken, allowing you to capture a second image with the same focus.
1 AE lock can also be set and released in mode (p. 44). You can use the FE lock when using the flash. Locking the (FE Lock) Flash Exposure Shooting Mode^ Setting HI^ You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject. Y Turn on the LCD monitor. 2 Press the ^ button and set it to Q (flash on). Focus on the part of the subject on which you wish to lock the flash exposure setting.
Switching between Metering Modes Shooting Mode i FUNC. Menu^ »i> «S’ (Evaluative) See Menus and Settings (p. 26). 'Default setting. •Use the 4 or 4- button to select the metering mode and press the FUNC./SET button. Evaluative L I OH Metering Methods m 50 Evaluative Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering.
Adjusting the Exposure Compensation Shooting Mode C»M SCN «*» <6^ ha 31 Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. 1 FUNC. Menu^^* (Exposure Compensation). See Menus and Settings (p. 26). *Default setting. •Use the 4 or 4- button to adjust the exposure compensation and press the FUNC./SET button.
Shooting in Long Shutter Mode Shooting Mode Q| You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 M(Rec.) Menu^[Long Shutter]^[On]. See Menus and Settings (p. 27). FUNC. Menu^^* (Exposure Compensation) ^ See Menus and Settings (p. 26). 'Default setting. Use the 4 or ^ button to select the shutter speed •The higher the value, the brighter the image and the lower the value, the darker the image.
The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot. Use the LCD monitor to confirm that the image was recorded at the desired brightness.
Adjusting the Tone (White Balance) Shooting Mode S®Qil Normally, the |B] (Auto) white balance setting selects an optimal white balance. When the [|f] (Auto) setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 FUNC. Menu |►[1* (Auto). See Menus and Settings (p. 26). *Default setting. • Use the 4 or button to select a white balance setting and press the FUNC./SET button.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the H (Auto) setting to detect correctly.
You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
Changing the Photo Effect Shooting Mode CMM By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. FUNC. Menu^^* (Effect Off) See Menus and Settings (p. 26). *Default setting. •Use the ^ or 4“ button to select a photo effect and press the FUNC./SET button. C/) Photo Effect Settings 5' s Effect Off m Vivid Emphasizes the contrast and color saturation to record bold colors. Neutral Tones down the contrast and color saturation to record neutral hues.
Shooting in a My Colors Mode Shooting Mode OM A My Colors mode easily changes the colors in an image when it is shot, allowing you to alter the balance between red, green and blue, transform pale or tanned skin or change a color specified in the LCD monitor into a different color. Since they work with both stills and movies, these modes let you enjoy producing various image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color.
Color Swap Custom Color Use this option to transform a color specified in the LCD monitor into another. The specified color can only be swapped into one other color, multiple colors cannot be chosen. Use this option to freely adjust the color balance between red, green, blue and skin tones*. It can be used to make subtle adjustments, such as making blue colors more vivid or face colors brighter. The skin colors of non-human subjects may also be altered.
1 The ISO speed will rise with some settings, which may increase the "noise" in the image. Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. M (Rec.) [On]/[Off]. Menu^[Save Original]^ See Menus and Settings (p. 27). • If [On] is selected, the two images will be numbered consecutively with the altered image following the original.
Setting the Camera to the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. (Color Accent) ^ See Menus and Settings (p. 26). •The camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the ^ button. o o 5' (Q •Only one color can be specified.
Setting the Camera to the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another. Original Color (Before Swapping) Desired Color (After Swapping) gS (Color Swap) ^ See Menus and Settings (p. 26) •The camera will switch to color input mode and the dis play will alternate between the original image and the color swap image (using the previously set color).
W' ►This completes the setting. ► If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode. 'll I I I ...1...^^''.. ..11.1" I ■ 1 The default setting for color swap mode changes green into white. You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The colors specified in the color swap mode are retained even if the camera's power is turned off.
ISO Adjusting ■a.: I • > ±V the ISO Speed Shooting Mode pM GUI Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed. Press the ISO button and switch settings. •Cycle through the l^/liS/^/EI^/Auto ISO speed with each press of the ISO button. •Selecting [Auto] sets the sensitivity to produce the optimal image quality.
Setting the Auto Rotate Function 0 <ÿ da Shooting Mode |~Q][ûivil[icN|r31!l lavback Mode [h Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. 1 (Set up) Menu ^ [Auto Rotate] ^ [On]/[Off]. ID See Menus and Settings (p. 27).
Creating an Image t' -T'' ¡if,I '^-. “a"’ dj Shooting Mode fi^[^[i^f^roi IV, . “ ->^ (Folder) Playback Mode [^ ►-- You can create a new folder at any time and the recorded images will be automatically saved to that folder. Create New Folder Auto Create Creates a new folder the next time you shoot images. To create an additional folder, insert another check mark. You can also specify a date and time if you wish to create a new folder using a shooting time after the specified date and time (p.
1 Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders. Resetting the File Number Shooting Mode SCN Q3l 0|
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder. New Folder Created Memory Card 1 Continuous r l L _ ' ------- Memory Card Exchanged for Another Memory Card 1 Memory Card 2 n o i > ------- n u0''-‘----- 0002 0u.
Playback/Erasing Please also see the Basic Camera User Guide (p. 11). Q Magnifying Images Press the zoom lever toward Q. I»*; • Eii% will display and a » 4*% magnified portion of the image will . display. ft ' 'SO : iMHgl • Images can be magnified up to a factor of approximately lOx. Approximate Location of the Displayed Area Use the 4, 4^ or 4 button to move around the image. • If you press the FUNC.
Viewing Images in Sets of Nine (Index Playback) Press the zoom lever toward • Up to nine images can be viewed selected Image at once. • Use the 4^ or 4 button to change the image selection. Movie Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward K while in index playback and you can switch the display between sets of nine images. •Use the 4 or 4 button to move to the previous or next set of 9 images. •Hold the FUNC.
Jumping to Images When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. Jump 10 Images Jumps over 10 images at a time. Jump 100 Images Jumps over 100 images at a time. Jump Shot Date Jumps to the first image of each shooting date. Jump to Movie Jumps to a movie. Jump to Folder Displays the first image in each folder. 7 In single image playback mode, press the (a button.
Viewing Movies Movies cannot be played in the index playback mode. Display a movie and press ► Images with a icon are movies. Movie Control Panel Volume Level-----(Adjust it with the ^ or ^ button) ^ Select □ (Play) and press •The movie will pause if you press the FUNC./SET button during playback. It will resume when you press the button again. •When playback ends, the movie stops at the last frame displayed. Press the FUNC./SET button to display the movie control panel.
Editing Movies You can delete portions of recorded movies. Movies 1 second or longer before editing can be edited in 1second increments, but those that are protected or less than 1 second long cannot be edited. Select ^ (Edit) in the movie control panel and Movie Editing Panel press >The movie editing panel and the movie editing bar will display. Movie Editing Bar Use the 4^ or ^ button to select ^ (Cut Beginning) or ^ (Cut End) and the ^ or ^ button to specify the cut point( I).
4 Select [New File] or [Overwrite] and press ► [New File] saves the edited movie under a new file name. The pre edit data is left unchanged. Note, if you press the FUNC./SET button while saving the movie, saving is canceled. ►[Overwrite] saves the edited movie with its original name. The pre-edit data is lost. ►When there is not enough space left on the memory card, only [Overwrite] can be selected. 1 74 It may take approximately 3 minutes to save an edited movie.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. m Rotate Original 90‘ 270° g] (Play) Menu^ ISISee Menus and Settings (p. 27). Erase all„ Slide Print Order» Use the 4 or button to select an image to rotate and press to rotate it. Q) < c Q> O m 0) w •Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. 3' (D •This also can be set in the index playback mode. • Movies cannot be rotated.
Playback with Transition Effects You can select the transition effect displayed when switching between images. The displayed image darkens and the next image gradually brightens until it is displayed. □ 1 r Press the ^ button to have the previous image display from the left and the ^ button to have the next image display from the right. (Play) Menu^l] See Menus and Settings (p. 27).
Use the 4 or button to select an image to attach a sound memo to and press •The sound memo control panel will display. Select n (Record) and press •The elapsed time and the remaining time display. •Pressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. • Up to 60 seconds of recordings can be added to any one image.
Automated Playback (Slide Shows) Automated Playback of Memory Card Images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 83). All Images Plays all images on a memory card in order. B Date □ Folder Plays images in a specified folder in order. Movies Plays movie files only, in order. Stills Plays still images only, in order. H Custom 1-3 l>1 B*31 Plays images bearing a specified date in order. Plays the images selected for each slide show.
Select [Start] and press •The following functions are available during slide shows. - Pausing/resuming the slide show: press the FUNC./SET button - Fast forwarding/rewinding the slide show: press the 4 or button (continue to hold the button to switch between images more rapidly) - Stopping the slide show: press the MENU button. Transition Effects You can select the transition effect used when one image is replaced by another. The new image gradually brightens as it moves upward from the bottom.
Selecting an Image Date or Folder for Playback ( ■ / □ ) 1 Select IB or Q and press rFUNCI .SET. Use the 4 or ^ button to select the date orjolder to be played back and press CS!ID±) Date Folder Selecting Images for Playback Select only the images that you wish to play back and save them as a slide show (Custom 1,2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. Select n, 9 or El and press •Only the Q icon will display at first.
Selecting All Images 1 After selecting H-0 in step 1 (p. 80), use the 4^ button to select [Mark all] and press the FUNC./SET button. 2 Use the 4 button to select [Mark all], press the FUNC./SET button. 3 Use the 4 button to select [OK] and press the FUNC./SET button. To deselect all images, select [Reset]. Adjusting the Play Time and Repeat Settings •Play Time Sets the duration that each image displays. Choose between 3-10 seconds, 15 seconds and 30 seconds.
Protecting Images You can protect important images and movies from accidental erasure. 1 (Play) Menu^Q. See Menus and Settings (p. 27). 2 Select an image to protect and press pm Prp,ts;t ® fi'; • Pressing the FUNC./SET button again cancels the setting. •You can also protect images in the index playback mode. Protection Icon Erasing Ali Images 41 Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function.
Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF. The A icon may display for a memory card with print settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.
3 Select images for printing. •Selection methods differ for the Print Type settings (p. 85). Number of Print Copies 1 - B (Standard)/Bl](Both) Select an image, press the FUNC./SET button and use the 4^ or button to select the number of print copies (up to maximum of 99). *^ ^ Uy4- Index Print Selection - S (Index) Select an image and the press FUNC./SET button to select or deselect it. •You can also select images in the index playback mode. All the Images on a Memory Card 1 Menu^@.
• The output of some printers or photo developing services may not reflect the specified print settings. • Print settings cannot be set for movies. 1 Images are printed in order according to the file number. A maximum of 998 images can be selected. When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).
2 Select [Set up] and press 3 Select [Print Type], [Date] or [File No.] and then specify the settings. 1 86 The Date and File No. settings change according to the Print Type as follows. - Index [Date] and [File No.] cannot be set to [On] at the same time. - Standard or Both [Date] and [File No.] can be set to [On] at the same time, however, the printable information may vary between printers. Embedded dates in ^ (Postcard Date Imprint mode) (p. 39) print out even when [Date] is set to [Off].
Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. The A icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.
All the Images on a Memory Card 1 (Play) Menuj^Hi. See Menus and Settings (p. 27). 2 Select [Mark all] and press •Selecting [Reset] cancels all transfer order settings. 'd Transfer Order (DPOF) Oty. of nages 0 Reset EilOtb Select [OK] and press I 88 Images are transferred in order according to the file number. A maximum of 998 images can be selected.
Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable. 1 Turn off the Camera and the TV. 2 Connect the AV cable to the camera’s A/V OUT terminal. •Open the terminal cover by slip ping a fingernail under the lower edge and plug the AV cable in all the way. 3l Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start up, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes. Changing My Camera Settings 1 E9 Camera) Menu^ Menu Item. See Menus and Settings (p. 27). Start»u£_; mmm Operation Sound 1 Selftiler Sound 1, Shutter Sound 2 Select the contents you wish to set. •Select [Theme] to set all to the same settings.
Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the m and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. ES A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera.
Select an image or record a sound •Start-up Image ìè start-up linage Select the image you wish to reg ister and press the FUNC./SET button. start-up soundCl sec.) ►Start-up, Operation, Self-timer and Shutter Sounds Canon Select □ (Record) and press the FUNC./SET button. After record ing, select m (Register) and press the FUNC./SET button. - Recording will automatically stop when the recording time elapses. - To play it, select Q (Play).
Troubleshooting Camera r Camera will not operate. Power is not turned on. «Press the power button {Basic Guide p. 5). Memory card slot/battery cover is open. ►Confirm that the memory card slot/ battery cover is securely closed {Basic Guide p. 2). Insufficient battery voltage ("Change the battery pack" message displays). ► Insert a fully charged battery into the camera {Basic Guide p. 2). Poor contact between camera and battery terminals.
LCD monitor The display darkens. The image in the LCD •This does not constitute a monitor will darken in malfunction and has no effect on strong sunlight or bright images that have been shot. light. Display flickers. Display flickers when shot under fluorescent lighting. ►This is not a camera malfunction (flickering recorded in movies, but not in still images). A bar of light (red, purple) appears on the LCD monitor. Subject is too bright.
Noise displays./Subject's movements are irregular. Camera automatically •There is no effect on the recorded lightened the image image. displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 17). Shooting Camera will not record. Mode dial is set to H (playback). •Set the mode dial to ^, QM, SCN or *■ {Basic Guide p. 6). Flash is charging. •The indicator will light orange when it is charged. You can then press the shutter button (p. 22). Memory card is full.
Image is blurred or out of focus. AF-assist Beam is set to [Off]. Mn dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 28). Take care not to obstruct the AF-assist Beam with your hand when used. The camera moves when the shutter button is pressed.
Subject in recorded image is too bright. Subject is too close, making the flash too strong. >Shoot within correct shooting distance of the subject when using the built-in flash (p. 114). Subject is bright in contrast to the background. »Set the exposure compensation to a negative (-) setting (p. 51). Too much light is shining directly into the camera, or is being reflected off the subject. »Change the shooting angle. Flash is set to on. >Set the flash to Guide p. 9).
Eyes appear red. Light reflecting back from eyes can make them appear red when the flash is used in dark areas. >Use the ^ (auto with red-eye reduction) mode {Basic Guide p. 9). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. >Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject.
SKooting Movies The recording time may not display properly or filming may stop unexpectedly. The following types memory cards are used. of ' •Although the recording time may not display properly during shooting, the movie will be recorded correctly on - Slow recording cards. the memory card. Recording time - Cards formatted on a will display properly if you format the different camera or a memory card in this camera computer. (excluding slow recording memory - Cards which have had cards) (p. 23).
Playback Cannot play back. You attempted to play back images shot with another camera or images edited with a computer. ^Computer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. File name was changed with a computer or file location was changed. iSet the file name or location on the file format/structure of the camera. (Refer to the Software Starter Guide for details). Movies cannot be edited. Tf.
Reading images from memory card is slow. Memory card was formatted in another device. «Lise a memory card formatted in your camera (p. 23). Battery/Battery Charger Battery consumed quickly. Battery life exceeded if «Replace the battery with a new one battery loses its charge {Basic Guide p. 2). quickly at normal temperature (23 °C/73 T). Battery will not charge. I Battery life exceeded. «Replace the battery with a new one {Basic Guide p. 2). TV monitor output Image not showing on TV monitor.
List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... • Image is being recorded to, or read from, memory card. The playback mode is starting up. No memory card •You turned on the camera without a memory card installed. Card locked! •The SD memory card is write-protected.
Change the battery pack. • Battery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery. No image. • No images recorded on memory card. Image too large. i ' ijr-v..; r.ifi •You attempted to play back an image larger than 4992 x 3328 pixels or with a large data size. Incompatible JPEG format. •You attempted to play back an incompatible JPEG image. Corrupted Data. •You attempted to play back an image with corrupted data.
Cannot register this imagelt* •You attempted to register an image recorded in a different camera or a movie as a start-up image. Protected! •You attempted to erase or edit a protected image, movie or sound memo. Too many marks. •Too many images have been marked with print settings, transfer settings or slide show settings. Cannot process any more. Cannot complete! •Could not save the print, transfer or slide show settings. Unselectable image.
Appendix Battery Handling Battery Charge The following icon and message will display. Change the battery pack s Battery charge is low. Recharge it as soon as possible it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. Battery Handling Precautions Keep the battery terminals ©©0 clean at all times. Dirty terminals may cause poor contact between the battery and camera.
You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 - 30 °C (32 - 86 T). Storing a fully charged battery for long periods of time (about one year) may shorten its life cycle or affect its performance. If you do not use the battery for long periods of time, charge it fully and discharge it fully in the camera about once a year before returning it to storage.
Handling the Memory Card Write Protect Tab Write Protect Tab Slide the switch up. * Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card) Writing/Erasing Impossible Cautions When Handling Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card.
Formatting Please note that formatting (initializing) an memory card erases all data, including protected images. You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.
Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK900 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter. 7 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. 2 Open the memory card slot/battery cover, then insert the DC coupler until it is locked.
Using an Externally (Sold Separately) Mounted Flash High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets Bracket (Comes with the flash) The flash charge time will lengthen as the battery charge gets weaker.
Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera’s front panel. A tripod can be used even when the flash is attached. Batteries •Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints.
Camera Care and Maintenance Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use synthetic cleansers on the camera body or lens.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. DIGITAL IXUS 750 (W): wide angle (T): telephoto Camera Effective Pixels Approx. 7.1 million Image Sensor 1/1.8-inch CCD (Total number of pixels: Approx. 7.4 million) Lens 7.7 (W)-23.1 (T) mm (35mm film equivalent: 37 (W) - 111 (T) mm) f/2.8 (W) - f/4.9 (T) Digital Zoom Approx. 4x (Up to approx.
White Balance Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom Built-in Flash Auto, auto with red-eye reduction, flash on with red-eye reduction, flash on, flash off, slow synchro Flash Range Normal: 50 cm - 5.0 m (1.6 - 16.4 ft.) (W), 50 cm-3.0 m (1.6-9.8 ft.) (T) Macro: 30 cm - 50 cm (1.0 - 1.6 ft.) (W/T) (When sensitivity is set to AUTO.) Shooting Modes (Still images) Auto, Manual, Digital macro^. My Colors^, Stitch assist^.
Number of Recording Pixels (Movies) Standard, My Colors: 640 X 480 pixels (30 frames/sec., 15 frames/sec.) 320 X 240 pixels (30 frames/sec., 15 frames/sec.) Recording can continue until the memory card is full* (can record up to a maximum of 1 GB at one time). Fast Frame Rate: (can record for 1 min.) 320 X 240 pixels (60 frames/sec.) Compact: (can record for 3 min.) 160 X 120 pixels (15 frames/sec.) * Using super high-speed SD cards (SDC-512MSH recommended). Playback Modes Single (histogram displayable).
*1 This digital camera supports Exit 2.2 (also called “Exit Print”). Exit Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exit Print-compliant printer, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints. Battery Capacity (Battery Pack NB-3L (Fully charged)) Number of Images Shot LCD Monitor ON (Based on the CIPA standard) Approx. 150 images Playback Time LCD Monitor Off Approx.
Memory Cards and Estimated Capacities I I: Card included with the camera Resolution Compression SDC-32MH 40 156 15 64 251 31 134 520 11 49 190 20 87 339 40 173 671 76 295 32 136 529 63 269 1041 28 121 471 51 217 839 97 411 1590 109 460 1777 168 711 2747 265 1118 4317 51 217 839 3072 X 2304 pixels □ 2592 X 1944 pixels 1?.
* Maximum movie clip length at 1 min., at 3 min. The figures indicate the maximum continuous recording time. Image Data Sizes (Estimated) Compression Resolution m □ g (3072 X 2304 pixels) 3045KB 1897KB 902KB g (2592 X 1944 pixels) 2503KB 1395KB 695KB g (2048 X 1536 pixels) 1602KB 893KB 445KB g (1600 X 1200 pixels) 1002KB 558KB 278KB 249KB 150KB 84KB - 558KB - g (640 X 480 pixels) IQ (1600 X 1200 pixels) Resolution Frame Rate □ File size 1980 KB/sec.
SD Memory Card Interface Dimensions Weight Compatible with SD memory card standards 32.0 X 24.0 X 2.1 mm (1.3 x 0.9 x 0.1 in.) Approx. 2 g (0.07 oz.) Battery Pack NB-3L Type Nominal Voltage Typical Capacity Cycle Life Operating Temperatures Dimensions Weight Lithium-ion Rechargeable battery 3.7 V DC 790 mAh Approx. 300 times 0-40 °C (32- 104 °F) 32.0 X 44.8 X 9.0 mm (1.3 x 1.8 x 0.4 in.) Approx. 22 g (0.8 oz.) Battery Charger CB-2LU/CB-2LUE Rated Input 1 0 0 - 2 4 0 V A C (50/60 Hz) 0.085 A (100 V)-0.
INDEX A E AC Adapter Kit ACK900 ............. 109 AE Lock ...........................................48 AF Frame .................................. 46, 47 AF Lock........................................... 47 AF-assist Beam.............................. 28 AiAF ................................................ 28 Auto Play (Slide Show) ................. 78 Auto Rotate Function .................... 65 AV Cable..........................................89 Erasing All Images ..................................
M s Macro............................ 14, Basic 10 Magnifying ..................................... 69 Memory Card Estimated Capacities.............. 117 Formatting .......................23, 108 Handling ..................................107 Inserting........................... Basic 2 Menu FUNC. Menu .........................26, 28 Menu List....................................28 Menus and Settings.................. 26 My Camera Menu ..................... 31 Play Menu ..................................
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, ; no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions, The settings selected in each shooting mode are saved after you finish shooting.
A SCN IQM Function / N Page 3 H s o o o o 0(7) A O p.28 — — On .o ^ o o o 0(8) Digital Zoom "* p.37 — o — Off o* o o o* A _(10) o — Evaluative o o ^■*i Metering — o Center-Weighted Average — — — p.50 :Q Method — O o o — Spot — — — o 0(9) A o Exposure Compensation — p.51 — — — — — — Exposure Shift o p.44 — o — Long Shutter — — — — p.52 _(io) — o o o White Balance A o p.54 _(10) — o O' — A Photo Effect 0(11) p.57 _(10) _(10) _(10) _(10) _(10) p.64 'o o ISO Speed ::'o o' o o O — p.