Owner's manual

►This completes the setting.

► If you press the MENU button at this point, you will return

to the screen where you can select a My Colors mode.

'll I I I ...1...^^''.. ..11.1" I ■

The default setting for color swap mode changes

green into white.

You may not obtain the expected results after color

input mode if you use the flash, or change the white

balance or metering settings.

The colors specified in the color swap mode are

retained even if the camera's power is turned off.

Setting the Camera to a Custom Color Mode

This mode allows you to adjust the color balance for red,

green, blue and skin tones.

^ (Custom Color) ^

See Menus and Settings (p. 26).

J “Cust(® Color Em®:

L « 4) ^ ^ ¿A

Use the 4^ or but

ton to select [Red],

[Green], [Blue] or

[Skin Tone] and the 4^

or 4^ button to adjust

the color balance.

•The altered color will display.

Select Adjust the

a color, color balance.

►This completes the setting.

► If you press the MENU button at this point, you will return

to the screen where you can select a My Colors mode.

I- *-