Instruction Manual

179
Troubleshooting
When the power is turned on
“Card locked!” message appears.
The SD memory card’s or
SDHC memory card’s write
protect tab is set to “Write
protect”.
z When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward (p. 198).
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low.
z Recharge the built-in battery
immediately (p. 13).
LCD monitor
Nothing is displayed.
LCD monitor is set to off. z Press DISP. button and turn on the
LCD monitor (p. 56).
[Power Saving] is set to
[Display Off].
z Press any button other than the ON/
OFF button or change the camera
orientation to turn the LCD monitor
back on (p. 163).
The LCD monitor will shut off during shooting.
If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in mode.
Camera screen is black at start-up.
Incompatible image has
been selected as the start-
up image in the My Camera
settings.
z Change the start-up image in the My
Camera settings (p. 175) or use the
supplied software program
ZoomBrowser EX or ImageBrowser
to restore the default settings.