ENGLISH DIGITAL CAMERA Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Viewing Images on a TV set Customizing the Camera Wireless Connection Troubleshooting Advanced Camera User Guide CDI-E207-010 XX05XXX © 2005 CANON INC. PRINTED IN JAPAN List of Messages Advanced Appendix Camera User Guide This guide explains camera features and procedures in detail.
Main Features Shooting Automatically adjusts shooting settings to match particular conditions (Scene mode) Automatically detects camera orientation with an Intelligent Orientation sensor Changes image colors to create special effects (My Colors modes) Playback Plays movies with sound Auto plays slideshows Editing Records sound memos for still images Edits movies Printing via a wireless connection Prints images easily by attaching the supplied wireless print adapter to a Canon PictBridge compliant printer T
Conventions Used in this Guide Icons appearing below titles indicate the modes in which the procedure can be used. Mode Switch Continuous Shooting Shooting Mode See Functions Available in Each Shooting Mode (p. 144). In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. This mark denotes issues that may affect the camera’s operation.
Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . .1 Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Please Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) . . .52 Locking the Exposure Setting (AE Lock). . . . . . . . . . . . . . . . .53 Locking the Flash Exposure Setting (FE Lock) . . . . . . . . . . . .54 Switching between Metering Modes . . . . . . . . . . . . . . . . . . . .55 Adjusting the Exposure Compensation . . . . . . . . . . . . . . . . . .56 Shooting in Long Shutter Mode . . . . . . . . . . . . . . . . . . . . . . . . .57 Adjusting the Tone (White Balance) . . . . . . . . . . . . . . . . . . . .
Using Wireless Connection (Connecting to Printer) . . . . . . .97 Connecting to a Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Deleting target devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 When the power is turned on . . . . . . . . . . . . . . . . . . . . . . . . 105 LCD monitor . . .
Handling Precautions Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Video Format Please set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 93). Language Setting Please see the Basic Guide (p. 4) to change the language setting. Operation Restrictions The wireless function used in this equipment has been approved for domestic use. For use of this function in other countries, please inquire through Canon's Customer Service Center. France: Using the wireless function outdoors is prohibited.
Statement on EC directive Contains already Notified Transmitter Module :CM13264 7
8
MADE IN JAPAN Safety Precautions Before using the camera, please ensure that you read the safety precautions described below and in the “Safety Precautions” section of the Basic Guide. Always ensure that the camera is operated correctly. The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
Equipment refers to the camera, battery charger, wireless print adapter or separately sold compact power adapter. Battery refers to the battery pack. Warnings Equipment Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. Store this equipment out of the reach of children and infants. • Wrist strap: Placement of the strap around the child’s neck could result in asphyxiation. • Memory card: Dangerous if accidentally swallowed.
Do not use substances containing alcohol, benzine, thinners or other flammable substances to clean or maintain the equipment. Do not cut, damage, alter or place heavy items on the power cord. Use only recommended power accessories. Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. Do not handle the power cord if your hands are wet.
Use only the specified battery charger to charge the battery. The battery charger and compact power adapter are designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of overheating and distortion which could result in fire or electrical shock. Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects.
Do not store the equipment in humid or dusty areas. Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. Such conditions could lead to fire, electrical shock or other damage. Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Before Using the Camera—The Components Guide Front View Before Using the Camera A/V OUT (Audio/Video output) Terminal (p. 93) DIGITAL Terminal Terminal Cover Wrist Strap Mount Microphone (p. 81) AF-assist Beam (p. 33) Red-Eye Reduction Lamp (Basic Guide p. 9) Self-Timer Lamp (p. 45) Viewfinder Window (p. 25) Flash (Basic Guide p. 9) Lens Wireless Lamp (p. 26) The interface cable and AV cable cannot be connected simultaneously.
How to Attach the Wrist Strap* How to Open the Terminal Cover * When carrying the camera by the strap, be careful not to swing the camera or catch it on other items. Back View LCD Monitor (p. 19) Viewfinder (p. 25) Tripod Socket DC Coupler Terminal Cover (p. 123) Memory Card Slot/Battery Cover (Basic Guide p.
Operation Panel Before Using the Camera Indicators (p. 26) Power Button (Basic Guide p. 5) Power Lamp Zoom Lever (p. 74, Basic Guide p. 8) Shooting: (Wide Angle)/ (Telephoto) Playback: (Index)/ (Magnify) Shutter Button (Basic Guide p. 5) Mode Switch (Basic Guide pp. 5, 6) (Print/Share) Button (Basic Guide p. 14) DISP. (Display) Button (p. 19) FUNC./SET (Function/Set) Button (p. 31) MENU Button (p. 32) (Macro)/ (Infinity)/ Button (Basic Guide p. 10) (ISO Speed)/ (Jump)/ Button (pp.
Wireless Print Adapter PRWIR IN ELE TA S DA S PT E SE TU DC R P IN DC IN (power) Terminal (p. 99) SETUP button (p. 103) Wireless Lamp (p.
Before Using the Camera—Basic Operations Using the LCD Monitor 1 Press . The display mode changes as follows with each press. Detailed (Information View) Off Playback Mode ( ) Standard Detailed No Information In the shooting modes, the shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode.
Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET button down while turning on the power. Method 2 In a shooting mode, hold the FUNC./SET button down. If you hold the camera horizontally, it displays the time. If you hold it vertically, the time and date display.
LCD Monitor Brightness LCD Monitor Brightness Settings * You cannot change the brightness of the LCD monitor with this function if you have already set it to its highest setting in the Set up menu. Night Display When shooting in dark conditions, the camera automatically brightens the LCD monitor to suit the brightness of the subject*, making it easier to frame the subject. Before Using the Camera The brightness of the LCD monitor can be changed in the following two ways.
Information Displayed on the LCD Monitor Shooting Information (Shooting mode) * Spot Frame ISO Speed (p. 69) * AF Frame (p. 51) Shooting Method (pp. 43, 45) * Low Battery (p. 119) Zoom Magnification* (p. 42) Macro/Infinity (Basic Guide p. 10) Grid Lines* (p. 33) Flash (Basic Guide p. 9) Auto Rotate (p. 70) (Red)* Movie Recording (p. 47) * AE Lock (p. 53) Wireless Connection (p. 101) • Stills: Recordable Shots • Movies (Sec.): Remaining Elapsed Time * FE Lock (p. 54) * AF Lock (p. 52) Time Zone (p.
If the indicator blinks orange and the camera shake icon displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Raise the ISO speed (p. 69) or select a setting other than (flash off), or attach the camera to a tripod or other device. Playback Information (Playback Mode) Standard Wireless Connection (p. 101) Folder Number-File Number Shooting Date/Time Protection Status (p. 87) Total number of images Before Using the Camera WAVE Format Sound (p.
Detailed Histogram Exposure Compensation (p. 56) Flash (Basic Guide p. 9) Macro/Infinity (Basic Guide p. 10) Photo Effect (p. 62) My Colors (p. 63) Shooting Mode (pp. 41, 47, 49, 63, Basic Guide pp. 7, 8) Metering Mode (p. 55) * Long Shutter Mode (p. 57) White Balance (p. 59) File Size ISO Speed (p. 69) Recording Pixels (Movies) (p. 40) Frame Rate (Movies) (p. 40) Transfer to computer complete (Software & Wireless Guide) Recording Pixels (Still Images) (p. 38) Movie Length (Movies) (p.
Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 56).
Indicators The indicators of the camera and the wireless print adapter light or blink in the following situations. Never do the following while an indicator is blinking. These actions may corrupt image data.
Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute*1 after the last control is accessed even if [Auto Power Down] is set to [Off].
Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 (Set up) Menu [Format]. See Menus and Settings (p. 32). 2 Select [OK] and press . To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark.
Setting the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting the Home/World Time Zones 1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 32). 3 . Before Using the Camera 2 Use the or button to select a home time zone .
5 Use the or tion time zone button to select a destina. As in Step 3, you can set the daylight saving option. 6 Time Difference from the Home Time Zone Use the or button to select [Home/ World], and the or button to select . Switching to the Destination Time Zone 1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 32). 2 Use the select or button to . To change the destination time zone, use the FUNC./SET button.
Menus and Settings Menus are used to set the shooting and playback settings as well as such camera settings as the date/time, electronic beep and wireless connection. The following menus are available. FUNC. Menu Rec., Play, Wireless, Set up and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions. Before Using the Camera Slide the mode switch to or . Press the FUNC./SET button. Use the or button to select a menu item. Some items may not be selectable in some shooting modes.
Rec., Play, Wireless, Set up and My Camera Menus Convenient settings for shooting or playback can be set with these menus. (Rec.) Menu (Play) Menu (Wireless) Menu (Set up) Menu (My Camera) Menu You can switch between menus with the or button when this part is selected. • This example shows the Rec. menu. • In playback mode, the Play menu displays. Press the MENU button. Use the or button to switch between menus. You can also use the zoom lever to switch between menus.
Menu List FUNC. Menu The icons shown below are the default settings. Menu Item Page Menu Item Page My Colors p. 63 Movie Mode p. 47 Metering Mode p. 55 Exposure Compensation p. 56 Compression p. 39 Long Shutter Mode p. 57 Frame Rate (Movie) p. 40 White Balance p. 59 Recording Pixels (Still Image) p. 38 Photo Effect p. 62 Recording Pixels (Movie) Rec. Menu p. 40 * Default setting Menu Item Options Page/Topic AiAF On*/Off p.
Stitch Assist Left to right*/ Right to left p. 49 Play Menu Menu Item Page Protect p. 87 Rotate p. 80 Sound Memo p. 81 Erase All p. 87 Slide Show p. 83 Print Order p. 88 Transfer Order p. 91 Transition p. 81 Wireless Menu Menu Item Options Page/Topic Connect/Disconnect p. 100, Software & Wireless Guide Reg. Target Device p. 102, Software & Wireless Guide Delete Registration Auto Transfer p.
Volume Off/1/2*/3/4/5 Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound and playback sound. The volume cannot be adjusted if [Mute] is set to [On]. Adjusts the volume of the start-up sound when the camera is turned on. Operation Vol. Adjusts the volume of the operation sound that plays when any button other than the shutter button is pressed. Selftimer Vol. Adjusts the volume of the self-timer sound played 2 sec. before the shutter is released.
Format File Numbering p. 28 Auto Reset/ Continuous* p. 72 Create Folder p. 71 Create New Folder Check mark (On)/ No check mark (Off) Auto Create Auto Rotate Creates a folder for the next shooting session. Off*/Daily/ You can also set a creation time. Monday–Sunday/ Monthly On*/Off p. 70 Language Video System Basic Guide p. 4 NTSC/PAL p. 93 Reset All p. 37 My Camera Menu Menu Item * Default setting Available Settings Theme Selects a common theme for each My Camera settings item.
Resetting Settings to Their Default Values 1 (Set up) Menu [Reset All]. See Menus and Settings (p. 32). 2 Select [OK] and press . Before Using the Camera Settings cannot be reset when the camera is connected to a computer or to a printer. The following cannot be reset. - Shooting mode - Item chosen from the (Wireless) menu - The [Time Zone], [Date/Time], [Language] and [Video System] options in the (Set up) menu (pp. 35, 36) - White balance data recorded with the custom white balance function (p.
Shooting Changing the Recording Pixels and Compression (Still Images) Shooting Mode 1 FUNC. Menu * (Recording Pixels)/ (Compression). * See Menus and Settings (p. 31). * Default setting. Use the or button to select recording pixels/compression settings and press the FUNC./SET button. Approximate Values for Recording Pixels Recording Pixels Purpose (Large) 2592 × 1944 pixels High Print larger than A4-size prints* 210 × 297 mm (8.3 × 11.7 in.) Print larger than Letter-size prints* 216 × 279 mm (8.
Approximate Values for Compression Settings Compression Superfine Fine Normal Purpose High Quality Shoot higher quality images Shoot normal quality images Normal Shoot more images See Image Data Sizes (Estimated) (p. 132). See Memory Cards and Estimated Capacities (p. 131).
Changing Recording Pixels and Frame Rates (Movies) Shooting Mode You can change the recording pixels and frame rate when the movie mode is set to (Standard) or (My Colors). 1 FUNC. Menu (Frame Rate). * (Recording Pixels)/ * See Menus and Settings (p. 31). *Default setting. Use the or button to select a recording pixels/frame rate and press the FUNC./SET button. Recording Pixels and Frame Rates Recording Pixels Frame Rate (frames/sec.
Magnified Close-Up Shooting (Digital Macro) Shooting Mode You can shoot a subject 3 – 10 cm (1.2 – 3.9 in.) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 9 × 7 mm (0.36 × 0.27 in.) at maximum zoom (approximately 4 times). 1 FUNC. Menu * (Auto) (Digital Macro). See Menus and Settings (p. 31). *Default setting. Shooting 2 Choose the angle of view with the zoom lever and shoot.
Using the Digital Zoom Shooting Mode You can shoot zoomed images using the combined digital and optical zooms. Stills: zoom up to approximately 12 times Movies (Standard): zoom up to approximately 12 times The digital zoom cannot be used when the LCD monitor is turned off. 1 (Rec.) Menu [Digital Zoom] [On]. See Menus and Settings (p. 32). 2 Press the zoom lever toward and shoot. The combined digital and optical zoom setting will display on the LCD monitor.
Continuous Shooting Shooting Mode In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 131). *Recommended Memory Card Super high speed SDC-512 MSH memory card (sold separately) immediately after a low level format (p. 28). 1 2 Press the to display .
Postcard Date Imprint Mode Shooting Mode You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown on the LCD monitor. 1 FUNC. Menu * (Recording Pixels) (Post Card Date Imprint). See Menus and Settings (p. 31). *Default setting. The recording pixels are set to (1600 × 1200) and the compression to (Fine). When you press the shutter button halfway, the area that will not get printed grays out.
Ensure that the camera’s date/time is set beforehand (p. 35). The date stamp cannot be deleted from the image data once it has been set. Using the Self-Timer Shooting Mode You can set a 10 sec. ( ) or 2 sec. ( ) delay, or a custom delay time and the number of shots ( Custom Timer), for shooting after the shutter button is pressed. Press the button to display , or . Shoot. When the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink.
Changing the Delay Time and Number of Shots ( ). You can change the delay time (0–10, 15, 20, 30 sec.) and number of shots (1–10). These settings, however, cannot be set for the Stitch Assist mode, movie mode or My Colors modes. 1 (Rec.) Menu [Self-timer] . See Menus and Settings (p. 32). 2 Change [Delay]/[Shots] . The self-timer sound will behave as follows. - The self-timer sound will start 2 seconds before the specified delay for shooting is over.
Movie Shooting Shooting Mode The following four movie modes are available. Standard You can select the recording pixels and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p. 42) • Recording Pixels: (640 × 480), • Frame Rate: (30 frames/sec.), • Maximum Size: 1 GB/movie (320 × 240) (15 frames/sec.
1 FUNC. Menu * (Standard). See Menus and Settings (p. 31). *Default setting. Use the or button to select a movie mode and press the FUNC./SET button. In or mode, you can change the recording pixels and frame rate (p. 40). 2 48 Shoot. Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. Pressing the shutter button fully starts recording video and sound simultaneously. During shooting the recording time (in seconds) and [ Rec] appear on the LCD monitor.
Before recording, you can set the AE lock (p. 53) and exposure shift. 1. Press the button. The exposure will lock (AE lock) and the exposure shift bar will appear on the LCD monitor. 2. Use the or button to adjust the exposure. Press the button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, photo effect or shooting mode settings. QuickTime 3.
2 Select a shooting direction 3 Shoot the first image in the sequence. . You can select from the following two shooting directions. Left to right horizontally Right to left horizontally The exposure and white balance are set and locked with the first image. 4 Compose the second image so that it overlaps a portion of the first and shoot. You can retake a shot by pressing the or button and returning to the previously recorded image screen.
Switching between Focusing Modes Shooting Mode You can select between the following two focusing modes according to the AiAF setting. The camera detects the subject and highlights the AF (No frame) On frames, from 9 available points, that it will use to determine the focus. The camera focuses using the center AF frame. This is Off convenient for focusing on a specific part of a subject with greater certainty. (Rec.) Menu [AiAF] [On]/[Off]. See Menus and Settings (p. 32).
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) Shooting Mode It may be difficult to focus on the following types of subjects. Subjects with extremely low contrast to the surroundings Scenes with a mixture of near and far subjects. Subjects with extremely bright objects at the center of the composition Subjects that are moving quickly Subjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass.
4 Re-aim the camera to compose the shot as desired and shoot. To Release the AF Lock Press the / button. When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 33) makes shooting easier since the camera focuses using the center AF frame only. The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective after the picture is taken, allowing you to capture a second image with the same focus.
AE lock can also be set and released in mode (p. 49). You can use the FE lock when using the flash. Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject. 1 2 Turn on the LCD monitor. 3 Focus on the part of the subject on which you wish to lock the flash exposure setting. 4 Press the shutter button halfway and press the button. Press the on).
Switching between Metering Modes Shooting Mode 1 FUNC. Menu * (Evaluative). See Menus and Settings (p. 31). *Default setting. Use the or button to select the metering mode and press the FUNC./SET button. Metering Methods Center Weighted Average Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Spot Meters the area within the spot AE point at the center of the LCD monitor.
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. 1 FUNC. Menu tion). * (Exposure Compensa- See Menus and Settings (p. 31). *Default setting. Use the or button to adjust the exposure compensation and press the FUNC./SET button. To Cancel the Exposure Compensation Restore the compensation value to [0].
Shooting in Long Shutter Mode Shooting Mode You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 (Rec.) Menu [Long Shutter] [On]. See Menus and Settings (p. 32). FUNC. Menu . * (Exposure Compensation) See Menus and Settings (p. 31). Shooting 2 *Default setting. 3 Use the speed or . button to select the shutter The higher the value, the brighter the image and the lower the value, the darker the image.
The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot. Use the LCD monitor to confirm that the image was recorded at the desired brightness.
Adjusting the Tone (White Balance) Shooting Mode Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 FUNC. Menu * (Auto). See Menus and Settings (p. 31). *Default setting. Shooting Use the or button to select a white balance setting and press the FUNC./SET button.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading in (Custom) for the following situations that are difficult for the (Auto) setting to detect correctly.
Shooting You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
Changing the Photo Effect Shooting Mode By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. 1 FUNC. Menu * (Effect Off). See Menus and Settings (p. 31). *Default setting. Use the or button to select a photo effect and press the FUNC./SET button. Photo Effect Settings Effect Off Records normally with this setting. Vivid Emphasizes the contrast and color saturation to record bold colors.
Shooting in a My Colors Mode Shooting Mode My Colors Settings Positive Film Use this option to make red, green or blue colors more intense like the Vivid Red, Vivid Green or Vivid Blue effects. It can produce intense naturalappearing colors like those obtained with positive film. Lighter Skin Tone* Use this option to make skin tones lighter. Darker Skin Tone* Use this option to make skin tones darker.
Color Swap Use this option to transform a color specified on the LCD monitor into another. The specified color can only be swapped into one other color, multiple colors cannot be chosen. Custom Color Use this option to freely adjust the color balance between red, green, blue and skin tones*. It can be used to make subtle adjustments, such as making blue colors more vivid or face colors brighter. * The skin colors of non-human subjects may also be altered.
The ISO speed will rise with some settings, which may increase the “noise” in the image. Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. 1 (Rec.) Menu [On]/[Off]. [Save Original] See Menus and Settings (p. 32). Shooting If [On] is selected, the two images will be numbered consecutively with the altered image following the original.
Setting the Camera to the Color Accent Mode Colors other than the color specified on the LCD monitor are shot in black and white. 1 (Color Accent) . See Menus and Settings (p. 31). The camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). 2 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button. Only one color can be specified.
Setting the Camera to the Color Swap Mode This mode allows you to transform a color specified on the LCD monitor into another. 1 Desired Color (After Swapping) (Color Swap) . See Menus and Settings (p. 31). The camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color).
4 . This completes the setting. If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode. The default setting for color swap mode changes green into white. You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The colors specified in the color swap mode are retained even if the camera’s power is turned off.
Adjusting the ISO Speed Shooting Mode Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed. 1 Press the button and switch settings. Cycle through the / / / /[Auto] with each press of the button. Selecting [Auto] sets the sensitivity to produce the optimal image quality.
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it on the LCD monitor. 1 (Set up) Menu [Auto Rotate] [On]/[Off]. See Menus and Settings (p. 32).
Creating an Image Destination (Folder) Shooting Mode You can create a new folder at any time and the recorded images will be automatically saved to that folder. Creates a new folder the next time you shoot Create New Folder images. To create an additional folder, insert another check mark. Auto Create (Set up) Menu ate Folder]. [Cre- See Menus and Settings (p. 32).
Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders. Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. 1 (Set up) Menu [File numbering] reset]/[Continuous]. [Auto See Menus and Settings (p. 32).
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder.
Playback/Erasing Please also see the Basic Guide (p. 11). Magnifying Images 1 Press the zoom lever toward . will display and a magnified portion of the image will display. Images can be magnified up to a factor of approximately 10x. Approximate Location of the Displayed Area 2 Use the , , or around the image. button to move If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and will display.
Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward Up to nine images can be viewed at once. Use the , , or button to change the image selection. . Selected Image Movie The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images. Use the or button to move to the previous or next set of nine images. Hold the FUNC./SET button down and press the or button to jump to the first or last set.
Jumping to Images When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. Jump 10 Images Jumps over 10 images at a time. Jump 100 Images Jumps over 100 images at a time. 1 Jump Shot Date Jumps to the first image of each shooting date. Jump to Movie Jumps to a movie. Jump to Folder Displays the first image in each folder. In single image playback mode, press the button.
Viewing Movies Movies cannot be played in the index playback mode. 1 Display a movie and press . Images with a movies. icon are Movie Control Panel Volume Level (Adjust with the or button) 2 Select (Play) and press . Operating the Movie Control Panel Playback/Erasing The movie will pause if you press the FUNC./SET button during playback. It will resume when you press the button again. When playback ends, the movie stops at the last frame displayed. Press the FUNC.
Use the television’s controls to adjust the volume when playing a movie on a TV set (p. 93). The sound cannot be played in slow motion playback. Editing Movies You can delete portions of recorded movies. Movies 1 second or longer before editing can be edited, but those that are protected or less than 1 second long cannot be edited. 1 Select (Edit) in the movie control panel and press . Movie Editing Panel The movie editing panel and the movie editing bar will display.
4 Select [New File] or [Overwrite] and press . [New File] saves the edited movie under a new file name. The preedit data is left unchanged. Note, if you press the FUNC./SET button while saving the movie, saving is canceled. [Overwrite] saves the edited movie with its original name. The pre-edit data is lost. When there is not enough space left on the memory card, only [Overwrite] can be selected. Playback/Erasing It may take approximately 3 minutes to save an edited movie.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original 1 90° 270° (Play) Menu . See Menus and Settings (p. 32). 2 Use the or button to select an image to rotate and press to rotate it. Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. This also can be set in the index playback mode. Movies cannot be rotated.
Playback with Transition Effects You can select the transition effect displayed when switching between images. Usual display The displayed image darkens and the next image gradually brightens until it is displayed. Press the and the 1 button to have the previous image display from the left button to have the next image display from the right. (Play) Menu / . See Menus and Settings (p. 32).
2 Use the or button to select an image to attach a sound memo to and press . The sound memo panel will display. 3 Select (Record) and press The elapsed time and the remaining time display. Pressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. Up to 60 seconds of recordings can be added to any one image. .
Automated Playback (Slide Shows) Automated Playback of Memory Card Images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 88). All Images Plays all images on a memory card in order. Date – Plays images in a specified folder in order. Movie Plays movie files only, in order. Stills Plays still images only, in order. Plays the images selected for each slide show, Custom 1, Custom 2 or Custom 3, in order (p. 85). Custom 1–3 (Play) Menu .
3 Select [Start] and press . The following functions are available during slide shows. - Pausing/resuming the slide show: press the FUNC./SET button - Fast forwarding/rewinding the slide show: press the or button (continue to hold the button to switch between images more rapidly) - Stopping the slide show: press the MENU button. Transition Effects You can select the transition effect used when one image is replaced by another.
Selecting an Image Date or Folder for Playback ( / ) 1 2 Select or and press . Use the or button to select the date or folder to be played back and press . Date Folder – ) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. 1 Select 2 Use the or button to move between images for playback and the button to select or deselect them.
Selecting All Images 1. After selecting – in step 1 (p. 85), use the button to select [Mark all] and press the FUNC./SET button. 2. Use the button to select [Mark all], press the FUNC./SET button. 3. Use the button to select [OK] and press the FUNC./SET button. To deselect all images, select [Reset]. Adjusting the Play Time and Repeat Settings Play Time Sets the duration that each image displays. Choose between 3–10 seconds, 15 seconds and 30 seconds.
Protecting Images You can protect important images and movies from accidental erasure. 1 (Play) Menu . See Menus and Settings (p. 32). 2 Select an image to protect and press . Protection Icon Erasing All Images Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function. 1 (Play) Menu Playback/Erasing Pressing the FUNC./SET button again cancels the setting.
Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF. The icon may display for a memory card with print settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.
3 Select images for printing. Selection methods differ for the Print Type settings (p. 90). (Standard)/ (Both) Select an image, press the FUNC./SET button and use the or button to select the number of print copies (up to 99). - Number of Print Copies Index Print Selection (Index) Select an image and the press FUNC./SET button to select or deselect it. You can also select images in the index playback mode. 2 Select [Mark all] and press . Selecting [Reset] cancels all print settings for the images.
Images are printed in order according to the file number. A maximum of 998 images can be selected. When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). Do not set the date in the DPOF print settings when printing images that have had the date embedded with the [Date Stamp] function. This may cause the date to be printed twice. Setting the Print Style The following print styles can be selected.
The Date and File No. settings change according to the Print Type as follows. - Index [Date] and [File No.] cannot be set to [On] at the same time. - Standard or Both [Date] and [File No.] can be set to [On] at the same time. However, the printable information may vary between printers. Embedded dates in (Postcard Date Imprint mode) (p. 44) print out even when [Date] is set to [Off]. Dates print in the style specified in the [Date/Time] menu (p. 35).
Single Images 2 Select [Order] and press . Selecting [Reset] cancels all transfer order settings. 3 Select an image to transfer and press Pressing the FUNC./SET button again deselects the setting. You can also select images in the index playback mode. Transfer Selection All the Images on a Memory Card 2 Select [Mark all] and press . Selecting [Reset] cancels all transfer order settings. 3 Select [OK] and press . Images are transferred in order according to the file number.
Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable. 1 2 Turn off the Camera and the TV. Connect the AV cable to the camera’s A/V OUT terminal. Slide the terminal cover open and firmly insert the AV cable. 3 Yellow IN VIDEO AUDIO Black 4 5 Turn on the TV and switch it to video mode. Turn on the camera.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and startup, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes. Changing My Camera Settings 1 (My Camera) Menu Menu Item. See Menus and Settings (p. 32). 2 Select the contents you wish to set. Select [Theme] to set all to the same settings.
Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera. 1 Slide the mode switch to (playback) (My Camera) Menu Menu Item to register.
3 Select an image or record a sound. Start-up Image Select the image you wish to register and press the FUNC./SET button. Start-up, Operation, Self-timer and Shutter Sounds Select (Record) and press the FUNC./SET button. After recording, select (Register) and press the FUNC./SET button. - Recording will automatically stop when the recording time elapses. - To play it, select (Play). - To exit instead of registering, press (Exit). 4 Select [OK] and press . To cancel registering, select [Cancel].
Using Wireless Connection (Connecting to Printer) When you want to save or print your images, this camera lets you transfer them to a personal computer or printer wirelessly, without the need for cables. Connecting to a Printer If you attach the supplied wireless print adapter to a Canon PictBridge compliant printer, you can print images taken with the camera after transferring them to the printer over a wireless connection. (p. 98) See the instructions, beginning on the next page.
Connecting to a Printer Attaching the wireless print adapter to a printer If you attach the supplied Wireless Print Adapter WA-1 to a Canon PictBridge compliant printer, you can print the images stored on your camera’s memory card via a wireless connection. Do not connect the wireless print adapter to a computer as doing so may cause the computer to malfunction. The wireless print adapter is only intended for Canon PictBridge compliant printers.
2 Attach the supplied compact power adapter to the wireless print adapter. Insert the compact Compact power power adapter cable adapter cable firmly into the wireless print adapter’s DC IN terminal. Insert into DC Attach the compact IN terminal power adapter CA-DC 20 if you are using a Canon PictBridge Compliant printer other than a CP710/CP510. You do Align the S marks. not need to use the compact power adapter CA-DC 20 if you are using CP710/510.
Connecting/Disconnecting Setting up a wireless connection to a printer 1 Slide the mode switch to (playback) (Wireless) Menu [Connect/Disconnect] See Menus and Settings (p. 32). Even if you press the button without displaying the menu in playback mode, the same screen will be displayed. 2 After confirming that [1.WA-1] is selected as the [Target Device], use the or buttons to select [Connect] and press (or ). The monitor will display “Connecting”, and soon the connection will be complete.
Ending the wireless connection 1 Slide the mode switch to (playback) (Wireless) Menu [Connect/Disconnect] See Menus and Settings (p. 32). 2 Use the or button to select [Disconnect], then press . The wireless connection will end. Wireless Connection If displays during wireless connection, it means that the connection is very good. The fewer the antennas displayed, the worse the wireless connection is. When and the wireless lamp both blink, it indicates an extremely bad connection.
Changing the wireless print adapter channel If the wireless print adapter channel (useful frequency) is already in use by another device, change the channel to avoid interference from radio waves. 1 Select the target device for which you wish to change the channel in [Target Device] and press . See Menus and Settings (p. 32). 2 Use the or buttons to change the channel and press . Press the MENU button to return to step 1 without changing the channel.
2 Slide the mode switch to (playback) (Wireless) Menu [Reg. Target Device]. See Menus and Settings (p. 32). 3 When the message “Press the SETUP button” is displayed in LCD monitor, press the wireless print adapter’s SETUP button within 10 seconds. The message “Registration completed” will appear on the LCD monitor. The newly registered wireless print adapter will be displayed on [Target Device] as [2.WA-1]. Subsequent wireless print adapters will be displayed as [3.WA-1], [4.WA-1] and so on. Press .
Deleting target devices You can delete devices which you no longer use. 1 (Wireless) Menu [Delete Registration] See Menus and Settings (p. 32). 2 Select the target device you wish to delete. 3 Use the , , or [Delete], then press Use the or button to select [Target Device], and the or button to select the target device you wish to delete. button to select . If you want to cancel instead of deleting, select [Cancel]. You cannot delete the wireless print adapter provided with the camera.
Troubleshooting Camera Camera will not operate. Power is not turned on. Press the power button (Basic Guide p. 5). Memory card slot/battery cover is open. Confirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 2). Insufficient battery voltage (“Change the battery pack” message displays). Insert a fully charged battery into the camera (Basic Guide p. 2). Use the AC Adapter Kit ACK-DC10 (sold separately) (p. 123). Poor contact between camera and battery terminals.
LCD monitor The display darkens. The image on the LCD monitor will darken in strong sunlight or bright light. This does not constitute a malfunction and has no effect on images that have been shot. Display flickers. Display flickers when shot under fluorescent lighting. This is not a camera malfunction (flickering recorded in movies, but not in still images). A bar of light (red, purple) appears on the LCD monitor. Subject is too bright.
Noise displays./Subject’s movements are irregular. Camera automatically lightened the image displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 21). There is no effect on the recorded image. Shooting Camera will not record. Set the mode switch to (Rec.) or (Movie) (Basic Guide p. 6). Flash is charging. When charging is complete, the indicator will light orange and you are free to start shooting (p. 26). Memory card is full. Insert a new memory card (Basic Guide p.
Image is blurred or out of focus. AF-assist Beam is set to [Off]. In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 33). Take care not to obstruct the AF-assist Beam with your hand when used. The camera moves when the shutter button is pressed.
Subject in recorded image is too bright. Subject is too close, making the flash too strong. Shoot within correct shooting distance of the subject when using the built-in flash (p. 128). Subject is bright in contrast to the background. Set the exposure compensation to a negative (-) setting (p. 56). Use AE lock or use the spot metering function (pp. 53, 55). Too much light is shining directly into the camera, or is being reflected off the subject. Change the shooting angle. Flash is set to on.
Eyes appear red. Light reflecting back from eyes can make them appear red when the flash is used in dark areas. Use the (auto with red-eye reduction) mode (Basic Guide p. 9). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject.
Shooting Movies The recording time may not display properly or filming may stop unexpectedly. The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly. Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card.
Playback Cannot play back. You attempted to play back images shot with another camera or images edited with a computer. Computer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF). File name was changed with a computer or file location was changed.
Reading images from memory card is slow. Memory card was formatted in another device. Use a memory card formatted in your camera (p. 28). Battery/Battery Charger Battery consumed quickly. Battery life exceeded if battery loses its charge quickly at normal temperature (23 °C/73 °F). Replace the battery with a new one (Basic Guide p. 2). Battery will not charge. Battery life exceeded. Replace the battery with a new one (Basic Guide p. 2). TV monitor output Image not showing on TV monitor.
Wireless connection to a printer Wireless connection to a printer is not possible. 114 You have not attached the wireless print adapter to the printer. Attach the wireless print adapter to the printer (p. 98). Your printer is not a Canon PictBridge compliant printer. When using a wireless connection between the camera and printer, ensure you are using a Canon PictBridge compliant printer (p. 98). You have not attached the compact power adapter to the wireless print adapter.
List of Messages • During shooting, playback, or wireless connection to a printer The error messages shown below will be displayed. • During wireless connection to a computer Please refer to the Software & Wireless Guide. • During printing Please refer to the Direct Print User Guide. Busy... Image is being recorded to, or read from, memory card. The playback mode is starting up. No memory card You turned on the camera without a memory card installed. Card locked! The SD memory card is write-protected.
Change the battery pack. Battery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery. No image. No images recorded on memory card. Image too large. You attempted to play back an image larger than 4992 × 3328 pixels or with a large data size. Incompatible JPEG format. You attempted to play back an incompatible JPEG image. Corrupted Data. You attempted to play back an image with corrupted data. RAW You attempted to play back a RAW image.
Cannot register this image! You attempted to register an image recorded in a different camera or a movie as a start-up image. Protected! You attempted to erase or edit a protected image, movie or sound memo. Too many marks. Too many images have been marked with print settings, transfer settings or slide show settings. Cannot process any more. Cannot complete! Could not save the print, transfer or slide show settings. Unselectable image. You attempted to set the print settings for a non-JPEG image.
Disconnected Wireless connection has disconnected. Either shorten the distance between the camera and the wireless print adapter; change the orientation of the camera or the angle of the wireless print adapter; or change the channel settings. Then establish a wireless connection again. Too many devices registered 8 target devices are already registered. If you wish to register additional devices, use [Delete Registration] to delete target devices you no longer use.
Appendix Battery Handling Battery Charge The following icon and message will display. Change the battery pack Battery charge is low. Recharge it as soon as possible it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. Battery Handling Precautions Appendix Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera.
You may be able to check the charge state depending upon how the terminal cover is attached (Fig. C, D). Fig. D Fig. C Charged Battery Attach it so the is visible. Spent Battery Attach it the opposite way to Fig. C. You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 – 30 °C (32 – 86 °F).
Handling the Memory Card Write Protect Tab Write Protect Tab Slide the switch up. Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card). Writing/Erasing Impossible Cautions When Handling Appendix Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card.
Formatting Please note that formatting (initializing) an memory card erases all data, including protected images. You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.
Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK-DC10 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the compact power adapter. 1 2 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet.
4 Close the memory card slot/battery cover and attach the cord to the DC terminal. Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation.
The flash charge time will lengthen as the battery charge gets weaker. Always set the power/mode switch to [OFF] when you finish using the flash. Be careful not to touch the flash window or sensor windows with your fingers while the flash is in use. The flash may fire if another flash is being used in close proximity. The High-Power Flash may not fire outdoors in daylight or when there are no reflective items.
Camera Care and Maintenance Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use synthetic cleansers on the camera body or lens.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS Camera Effective Pixels Image Sensor Lens Digital Zoom Optical Viewfinder LCD Monitor AF System Shooting Distance (From the front of the lens) Shutter Shutter Speeds (W): Max. wide angle (T): Max. telephoto Approx. 5.0 million 1/2.5-inch CCD (Total number of pixels: Approx. 5.3 million) 5.8 (W) – 17.
Built-in Flash Auto, auto with red-eye reduction, flash on with red-eye reduction, flash on, flash off, slow synchro Flash Range Normal: 50 cm – 3.5 m (1.6 – 12 ft.) (W), 50 cm – 2.0 m (1.6 – 6.6 ft.) (T) Macro: 30 – 50 cm (1.0 – 1.6 ft.) (W/T) (When ISO speed is set to AUTO.
Number of Fast Frame Rate: (can record for 1 min.) Recording Pixels 320 × 240 pixels (60 frames/sec.) (Movies) Compact: (can record for 3 min.) 160 × 120 pixels (15 frames/sec.) * Using super high-speed memory cards (SDC512MSH recommended). Playback Modes Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 10x (max.
Operating Humidity 10 – 90% Dimensions 99.0 × 54.4 × 21.7 mm (3.90 × 2.14 × 0.85 in.) (excluding protrusions) Weight Approx. 130 g (4.59 oz.) (camera body only) *1 This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Memory Cards and Estimated Capacities : Card included with the camera Recording Pixels Compression (Large) 2592 × 1944 pixels (Middle 1) 2048 × 1536 pixels (Middle 2) 1600 × 1200 pixels (Small) 640 × 480 pixels (PostCard Date Imprint Mode) 1600 × 1200 pixels SDC-16M SDC-128M SDC-512MSH 5 49 190* 9 87 339 19 173 671 8 76 295 15 136 529 30 269 1041 13 121 471 24 217* 839 46 411 1590 52 460 1777 80 711 2747 127 1118 4317 24 217* 839 • Capable of smooth continuous s
Image Data Sizes (Estimated) Compression Recording Pixels (2592 × 1944 pixels) 2503 KB 1395 KB 695 KB (2048 × 1536 pixels) 1602 KB 893 KB 445 KB (1600 × 1200 pixels) 1002 KB 558 KB 278 KB (640 × 480 pixels) 249 KB 150 KB 84 KB – 558 KB – (1600 × 1200 pixels) Movie Recording Pixels 132 Frame Rate File size 1980 KB/sec. Standard (640 × 480 pixels) My Colors (320 × 240 pixels) Fast Frame Rate (320 × 240 pixels) 1320 KB/sec. Compact (160 × 120 pixels) 120 KB/sec. 990 KB/sec.
Wireless Print Adapter WA-1 Supported Camera PowerShot SD430 DIGITAL ELPH WIRELESS/ DIGITAL IXUS WIRELESS Supported Printer Canon PictBridge compliant printer* * Compact power adapter CA-DC20/CA-DC20E is required (except for SELPHY CP710/CP510). SELPHY CP710/CP510 can be powered by the USB bus. Wireless Standard IEEE802.11b Wireless Mode Ad hoc Mode Security AES Transmission range Approx. 30 m (However, make sure that there are no interfering obstacles between the devices.
SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 × 24.0 × 2.1 mm (1.26 × 0.94 × 0.08 in.) Weight Approx. 2 g (0.07 oz.) Battery Pack NB-4L Type Lithium-ion Rechargeable battery Nominal Voltage 3.7 V DC Typical Capacity 760 mAh Operating Temperatures 0 – 40 °C (32 – 104 °F) Dimensions 35.4 × 40.3 × 5.9 mm (1.40 × 1.59 × 0.23 in.) Weight Approx. 17 g (0.60 oz.
INDEX A AC Adapter Kit ACK-DC10 ...123 AE Lock ..................................53 AF Frame .........................51, 52 AF Lock ..................................52 AF-assist Beam ......................33 AiAF ........................................33 Auto Play (Slide Shows) .........83 Auto Rotate Function ..............70 AV cable .................................93 B Battery Battery Capacity ...............130 Charging .. 119, Basic Guide 1 Handling ...........................119 Installing ....
Memory Cards Estimated Capacities ....... 131 Formatting .......................... 28 Menu FUNC. Menu ................ 31, 33 Menu List ........................... 33 Menus and Settings ........... 31 My Camera Menu .............. 36 Play Menu .......................... 34 Rec. Menu ......................... 33 Set up Menu ...................... 34 Wireless Menu ................... 34 MENU Button ......................... 17 Messages ............................ 115 Metering Modes .....................
MEMO 137
MEMO 138
MEMO 139
MEMO 140
MEMO 141
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
FCC Notice (Digital Camera, Model PC1190/Wireless Print Adapter, Model WA-1N) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting.
Function Page On Off Digital Zoom – * * Evaluative – Center-Weighted Average – Spot – Exposure Compensation – Exposure Shift – – Long Shutter – White Balance – Photo Effect – ISO Speed –(10) Auto Rotate Grid Lines (10) – * * * Metering Method *Default setting (8) * – – – – (10) (9) – – – – – –(10) – – –(10) –(10) –(10) – – – U – – – – – – – U U p. 42 (10) (11) –(10) –(10) U – – p. 55 p. 56 p. 49 p. 57 p. 59 p. 62 p. 69 p. 70 p.
