2 Turn on the printer. 3 Turn on the Mac. 4 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. 5 Double-click the Mac OS X folder, then double-click the Printer Driver folder. 6 Double-click PIXMA iP4000R xxx.pkg. “x” represents a number. When using Mac OS X v.10.2, the Authenticate dialog box appears. Enter the administrator’s name and password, and click OK. 7 Click Continue. 8 Read the License Agreement carefully and click Continue, then click Agree.
11 Enter the administrator’s name and password, and click OK. If you have forgotten the administrator name and/or password, click and follow the instructions in Mac Help. 12 A message asking for your confirmation to restart your Mac appears on the screen. Read the message, then click Continue Installation. Software installation will start. 13 Click Restart. When the computer restarts, BJ Network Tool will start up.
17 Confirm that your printer is added to the list of printers. The alphanumeric string after the printer name is its MAC address. If the printer does not appear on the list, click Add and select USB from the pop-up menu. Select iP4000R from the list of printers and click Add. Printer driver setup is now complete. 18 Install applications. In the Setup Software & User’s Guide CD-ROM, double-click CANON_BJ and then double-click Application.
1 Turn on the printer. 2 Turn on the computer. 3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. • If the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon. For non-XP Windows, doubleclick My Computer in the Windows screen, then double-click the CD-ROM icon. • If the language selection screen appears, select the language, then click OK. • If the location selection message appears, select your place of residence, then click Next.
6 Read the License Agreement carefully and click Yes. 7 Select Set up only the computer and click Next. 8 Select the printer in the Printers dialog box, and click Next. If the printer was not detected, confirm the following and click Update. • Ensure that the printer is on. • Ensure that the firewall is turned off. • When using wireless LAN, confirm that the computer can communicate with the access point. • When using wired LAN, confirm that the computer is connected to the hub.
10 When the installation results are displayed, click OK. If you are prompted to restart the computer, click Yes and restart the computer. 11 When the On-Screen Manual dialog box appears, click Next. Printer software installation is now complete. You can skip print head alignment if it is already adjusted properly. Setting Up an Additional Computer to Use a Printer Already Connected to a Network - Macintosh • Make sure the computer you are setting up is NOT connected to the printer via a USB cable.
6 Click Continue. 7 Read the License Agreement carefully and click Continue, then click Agree. 8 Select a destination volume to install the printer driver, and click Continue. 9 Click Install. When using Mac OS X v.10.2, go to step 11. 10 Enter the administrator’s name and password, and click OK. If you have forgotten the administrator name and/or password, click and follow the instructions in Mac Help. 11 A message asking for your confirmation to restart your Mac appears on the screen.
12 Click Restart. When the computer restarts, BJ Network Tool will start up. If it does not start automatically, select Library Printers - Canon - BJ Printer - Utilities - BJ Network Tool. 13 Select Setup from the pop-up menu. 14 When a message appears notifying that no printer was detected, click OK. 15 Click Printer Setup Utility (Print Center on Mac OS X v.10.2). 16 Click Cancel. 17 Click Add. 18 Select CANON BJ Network from the pop-up menu, select iP4000R from the list of printers, and click Add.
20 Install applications. In the Setup Software & User’s Guide CD-ROM, double-click CANON_BJ and then double-click Application. Double-click the installer in folder for each application you want to install. Software setup is now complete. You can skip print head alignment if it is already adjusted properly. Aligning the Print Head Aligning the print head allows you to print without shifting the color registration, and is a necessary step to print properly.
4 Click the Maintenance tab, and click Print Head Alignment. 5 Read the message and click Print Head Alignment. It takes about 80 seconds to start printing. Do not open the Top Cover while printing. 6 If a message warning you not to perform other operations appears, click OK. 7 Ensure the pattern shown on the left is printed. The Print Head is aligned automatically. The printer is now ready to use.
Aligning the Print Head - Macintosh 1 Double-click the hard disk icon where the printer driver was installed, the Applications folder, and then the Utilities folder. 2 Double-click the Printer Setup Utility icon. When using Mac OS X v.10.2, double-click the Print Center icon. 3 Select your printer from the Name list and click Utility. If the printer is not displayed in the Printer List, you need to add it on the list. For details, follow the instructions in Mac Help. When using Mac OS X v.10.
7 Ensure that the pattern on the left is printed. The Print Head is aligned automatically. The printer is now ready to use. If the pattern is not printed successfully, refer to “Eleven Flashes” in “The Power Lamp Flashes Orange” of the User’s Guide.
Basic Operations • If you detect smoke, unusual smells or strange noises around the printer, immediately switch the printer off and always unplug the printer. Contact your local Canon service representative. • To avoid injury, never put your hand or fingers inside the printer while it is printing. Printing with Windows Adjusting the print settings according to your needs allows you to produce better quality prints. In this section, we will use NotePad for the purpose of explanation.
4 Ensure that the proper lamp of the paper source is lit. Sheet Feeder Lamp Cassette Lamp If not, press the Paper Feed Switch on the printer. 5 To start printing, click Print. Printing will start in a few moments.
Basic Printing Settings For the best print quality, specify the minimum requirement settings in the Main tab. To get the best results, ensure you select the type of media loaded in the printer when printing on paper other than plain paper. (7) (1) (2) (3) (4) (5) (6) (1) Media Type Select the type of media loaded in the printer. (2) Paper Source Select the setting here when you do not specify the paper source with the Paper Feed Switch on the printer.
Printing with Macintosh Adjusting the print settings according to your needs allows you to produce better quality prints. Printing 1 Open the Page Setup dialog box in your application. From the File menu, click Page Setup. Refer to the application’s users manual for the actual procedures. 2 Specify the page setup, then click OK. For details, see “Page Setup” on page 59. 3 Open the Print dialog box in your application to print the document. From the File menu, click Print.
Page Setup From the Page Setup dialog box, specify the Paper Size settings. Select the paper size to be used. Basic Printing Settings For the best print quality, specify the minimum requirement settings in the Print dialog box. Select Quality & Media from the pop-up menu to change the display of the dialog box. To get the best results, ensure you select the type of media loaded in the printer when printing on paper other than plain paper.
Print Head Maintenance If Blurring Occurs or If a Specific Color Does Not Print Perform Print Head Cleaning to improve the print quality. Ensure that the printer is turned on and follow the instructions below. • Windows Open the Printer Properties dialog box and click the Maintenance tab. Click Cleaning. For details, refer to the User’s Guide. • Macintosh Open the BJ Printer Utility dialog box and select Cleaning from the pop-up menu. Click Cleaning. For details, refer to the User’s Guide.
3 Install the new ink tank. Put back the Inner Cover and close the Top Cover when finished. For more details about maintenance, refer to the User’s Guide.
Appendix Printing Photographs Directly from a Digital Camera Connecting a digital still camera or camcorder to the printer allows you to print recorded images directly without using a computer. This printer supports both PictBridge and Canon Bubble Jet Direct. • PictBridge is an industry standard enabling a range of digital photo solutions, including the direct printing of photos from a digital still camera or a digital video camcorder* without the need to use a computer.
3 Connect the digital camera to the printer. (1) Connect the camera to the printer using the USB cable (for connection to a computer) supplied with the camera. (2) Turn on and set up the camera for direct printing. When the connection between the camera and printer has been established, the POWER lamp on the printer flashes once. * The power-on sequence may differ depending on the model or brand of the camera.
About Paper size and Paper type To change the paper size or paper type, operate the camera to select the PictBridge print setup mode and confirm or check the settings. To print on Photo Paper Pro, select Fast Photo from Paper type on the display of the camera. Select Photo for Photo Paper Plus Glossy. If using a Canon PictBridge-compatible camera, you can select 5" x 7" from Paper size The following sizes and types of paper can be loaded in the printer by selecting options from Paper size and Paper type.
About Date print If “On” is selected, the shooting date recorded in Exif image data is printed in the lower-right corner of each photo. • This printer can handle only Exif/JPEG image data to produce photos using PictBridge. • Never disconnect the USB cable during printing. • When disconnecting the USB cable between the digital camera and printer, follow the instructions given in the Instruction Manual of the camera.
Printing Photographs Directly from a Canon Bubble Jet Direct Compatible Digital Camera Media Types for Digital Camera When you connect a digital camera, you can use the following media: Digital Camera Setting Media Type Card #1 Photo Paper Pro 4" x 6" / 101.6 x 152.4 mm Card #2 Photo Paper Plus Glossy 4" x 6" / 101.6 x 152.4 mm Photo Paper Plus Semi-gloss 4" x 6" / 101.6 x 152.4 mm Glossy Photo Paper 4" x 6" / 101.6 x 152.4 mm Card #3 Photo Paper Plus Glossy 5" x 7" / 127.0 x 177.
Notes on Handling the USB Interface (for Windows Users) If installation of the printer driver does not proceed as instructed in this Setup Guide, there may be a problem with the USB driver installation. Try reinstalling the printer driver. Reinstalling The screen shown on the left appears when the installation of the printer driver fails. If the reinstallation is unsuccessful; 1 Click Cancel on the Printer Connection dialog box. 2 Click Start Over on the Installation Failure dialog box.
Initializing Network Settings To initialize the network settings of the printer, follow these steps. Note that initialization erases all connection settings with computers, disabling printing. 1 Make sure that the printer is connected to your computer with a USB cable. 2 Turn on the printer. 3 Start BJ Network Tool. On Windows, click Start and select All programs (or Programs), BJ Network Tool and then BJ Network Tool.
Applications Included in the CD-ROM Package Easy-WebPrint (Windows) You can easily print out homepages displayed on Internet Explorer in full size without its righthand side being cropped. This application is automatically added to the Internet Explorer toolbar. Internet Explorer 5.5. or later must be installed. Easy-PhotoPrint (Windows/Macintosh) You can make a Borderless Print easily and quickly, just by selecting a photograph taken with a digital camera and the paper type on which to print.
Troubleshooting Cause and measures on possible troubles in the setup procedure are explained here. If you do not find a description for your trouble here, refer to “Troubleshooting” on the User’s Guide and the Network Guide. For details on viewing the guides, see “How to View the User’s Guide/Network Guide” on page 68.
Problem Possible Cause and Measures The computer cannot communicate with the printer or an access point between rooms or floors Although wireless communication between rooms or floors is possible, the wireless communication quality may become poor. The wall must be made of a material that allows radio waves to pass through. If the wall material prevents communication, set the printer in the same room as the access point.
Problem The Access Points dialog box is displayed during setup Possible Cause and Measures The Access Points dialog box is displayed when: - No access point is detected. - Multiple access points are detected. - Entry of a network key is necessary to communicate with the target access point. If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. Follow the instructions below to detect access points.
Problem The Access Points dialog box is displayed during setup (Continued) Possible Cause and Measures (1) Detected Access Points The signal strength, network key (WEP or WPA) usage, network name (SSID), and the used channel are displayed. The signal strength is indicated by the number of bars displayed with the antenna. :Good :Fair :Poor Whether a network key is used or not is indicated as follows.
Problem Possible Cause and Measures The target access point If the target access point is not detected or if you want to specify access point is not detected, or you settings manually, click Manual Setup in the Access Points dialog box. want to specify access point settings manually If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. Set the target access point and click Connect.
Problem Possible Cause and Measures The target access point is not detected, or you Set the target access point and click Connect. want to specify access point settings manually (Continued) (1) (2) (3) (4) Enter the settings for the target access point. (1) Network (SSID) Enter the network ID (SSID) set to the access point. SSID is also called ESS-ID. For details, refer to the manual of your access point. (2) Encryption Method Select an encryption method from Do Not Use, Use Password (WEP), or Use WPA.
Problem Possible Cause and Measures How to set a WEP key Refer to the manual provided with the access point and check the access point settings. Confirm that the computer and the access point can communicate with each other. Then set up the printer to match the settings of the access point. When using WEP, the key length, key format, the key to use (out of 1 to 4), and the authentication method must match among the access point, the printer, and the computer.
Problem Possible Cause and Measures The Set Printer IP Address / Printer IP Address Setup dialog box is displayed during setup The following dialog box is displayed if no printer was detected on the network. Specify an IP address to detect the target printer. (1) (2) (3) (4) (1) Get IP address automatically Detects the printer automatically. If automatic printer detection fails, check the network settings and your network connection.
Problem Checking the IP address or the MAC address of the printer Possible Cause and Measures To check the IP address or the MAC address of the printer, print out the printer setup information or use BJ Network Tool. For information on how to print out the printer network setting information, “Printing and Initializing Network Settings” on page 67. To display the Network Information dialog box, in the BJ Network Tool, select Network Information from the View menu.
Problem The Printer Network Setup dialog box is displayed during setup Possible Cause and Measures The Printer Network Setup dialog box is displayed in the following cases. - when you are re-setting a printer whose setup was canceled halfway - when you changed the network settings - when you are already using a printer over a wireless LAN If you canceled setup or changed the network settings, perform network setup again.
Problem The printer cannot communicate with the access point in a wireless LAN Possible Cause and Measures 1 Click Update to search for access points again from the Access Points dialog box. 2 If the access point is still not detected, move the printer closer to the access point or remove any obstacles, and then click Update. 3 If the access point is still not detected, click Manual Setup to specify the settings of the access point in the Manual Setup dialog box, and then click Connect.
Problem No printer is detected after the network settings are changed in Windows Possible Cause and Measures Wait until the IP address is assigned to the computer. You may need to restart your computer. When you are using Windows Me or Windows 98, you need to restart the computer. Search for the printer again after confirming a valid IP address is assigned to the computer.
Problem Possible Cause and Measures Re-setting the printer whose setup was canceled halfway Restore the printer to the factory settings and set up the printer again. For details, see “Printing and Initializing Network Settings” on page 67. For setup procedures, see “Setting Up the Printer and the Computer” on page 16. Confirming the version of Windows XP If you are using Windows XP, you may need to confirm your system version to configure the network setting of your computer.
Conformity declaration for R&TTE English Hereby, Canon, declares that this PIXMA iP4000R is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Canon vakuuttaa täten että PIXMA iP4000R tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Greek ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ Canon Ǿȁ ȃǼǿ ȅȉǿ PIXMA iP4000R ȈȊȂȂȅȇĭ ȃǼȉǹǿ ȆȇȅȈ ȉǿȈ ȅȊȈǿ ǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǿǹȉǹȄǼǿȈ ȉǾȈ ȅ ǾīǿǹȈ 1999/5/ǼȀ Italian Con la presente Canon dichiara che questo PIXMA iP4000R è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Regulatory Information For 110-120V, 50/60Hz model Color Printer Model: K10245 (Contains IC 498C-K30242) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following ink tanks are compatible with iP4000R. For details on ink tank replacement, refer to “Print Head Maintenance” in this guide. QA7-3430-V02 XXXXXXXX ©CANON INC.
