User Manual

E11
Getting to know the names of the parts
Getting to Know the Names of the Parts
DISPLAY
DISPLAY switch
Push this to show the display. When it is pushed once, the display is turned on; when it is pushed
again, the display is turned off.
Display
This appears when the DISPLAY switch is pushed.
If two or more minutes are allowed to elapse without any operation being
performed, the display turns off automatically.
Digital function selector
This key is used to perform all the setting operations on the display.
Depending on the operation method, one of its five functions may be
set. (Refer to “Control key names and operation methods”
in the table below.)
Operation
Name
Detailed description
How the key's operation
is represented
PUSH
This key is pushed when { } has appeared on the screen
display or when a selection is to be entered.
key
Set
key
Set key
Right key
Left key
Up key
Down key
key
Push
Move right
Move left
key
key
Move up
Move down
The operation of this key takes effect when { } has appeared
on the screen display.
The operation of this key takes effect when { } has appeared
on the screen display.
The operation of this key takes effect when { } has appeared
on the screen display.
The operation of this key takes effect when { } has appeared
on the screen display.
Names of the parts
Control key names and operation methods
FOREWORD