User Manual

E1-2
1.1 Screen Conguration
1.1 Screen Conguration
Top screen
The rst screen to appear when the DISPLAY switch is
pushed is referred to as the Top initial screen (see Fig. 1-1
on the left).
The 8 most frequently used items among the 14 setting
items are displayed on this screen. To display the other 6
setting items, push the down key to scroll down the screen.
(See Fig. 1-2 on the left).
1. To MENU screen
2. User selection
3. Iris gain settings
4. Zoom track function ON/OFF selection
5. Function allocation to AUX1 switch
6. Function allocation to VTR switch
7. Function allocation to AUX2 switch
8. Function allocation to RET switch
9. Frame Preset1 settings
10. Frame Preset2 settings
11. Iris torque setting
12. Zoom curve mode setting
13. Iris A/M switch setting
14. Function allocation to seesaw switch
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
Fig1-1
Top initial screen
(For the setting procedures, see “2. Top screen”.)
Fig1-2
[ Frm1 ] [ Frm2 ]
[ ]
MENU
1
Norm
AM
Zoom
[ Z.M. ][ I-Tq ] H
Items which are displayed by scrolling
Item which is not scrolled
The 33 setting items and 3 follow-up relative value displays appear on the display screen of this product. The
most frequently used items are displayed in a simplied format on the Top screen (screen which appears
when the DISPLAY switch is pushed). The setting of all the items and the detailed settings can be performed
on the MENU screen (see next page).
A total of 14 setting items (see below) are provided on the Top screen.