User Manual

E2-3
2.1 Top Screen
User
Zoom track
VTR switch
Frame Preset2
Iris gain
Seesaw switch
AUX1 switch
AUX2 switch
Iris A/M switch
Iris torque
Frame Preset1
Users
User selection (User 0 to 9)
Analog mode settings (User A)
Analog mode operations (User A)
The settings can be changed for each of 10 users,
who are indicated by the numbers 0 to 9, so that the
appropriate settings will be used by the appropriate user.
The user who will use them or the user for whom the
settings are changed is selected here.When A is selected,
the analog mode of a conventional type of drive unit can
be established.When the analog mode is established,
the digital functions can no longer be used.
This is set to ON when the zoom track function is to be
used.
At the factory, the {shuttle} function is allocated to the
AUX1 switch on the drive unit, but another function can
be allocated instead.
At the factory, the {VTR} function is allocated to the VTR
switch on the drive unit, but another function can be
allocated instead.
At the factory, the {Frame1} function is allocated to the
AUX2 switch on the drive unit, but another function can
be allocated instead.
Zoom track function ON/OFF selection E2-14
Function allocation to VTR switch E2-16
Function allocation to AUX1 switch E2-15
Function allocation to AUX2 switch E2-17
"3. MENU Screen" E3-1
Page Page
1
2
3
4
9
10
11
12
[Trk]
A 1
A 2
V
R
[ ]
MENU screen
MENU
[ I-Tq ]
[ I-Gain ]
[ Frm2 ]
[ Frm1 ]
AM
RET switch
Frame Preset2 settings E2-22
Iris gain setting E2-12
Function allocation to seesaw switch E2-29
Iris A/M switch setting E2-28
Iris torque setting E2-25
Frame Preset1 settings E2-19
Function allocation to RET switch E2-18
At the factory, the {Return} function is allocated to the
RET switch on the drive unit, but another function can be
allocated instead.
The preset speed of framing preset 1 and the zoom
or focus operations up to the memory position can be
switched to ON or OFF.
The preset speed of framing preset 2 and the zoom
or focus operations up to the memory position can be
switched to ON or OFF.
The amount of operating force used to operate the iris
ring manually can be changed.
The iris gain in the auto or remote mode can be changed.
The movement of the iris A/M switch on the drive unit
can be changed.
The iris operation using the zoom seesaw switch can be
enabled.
E2-4
E2-5
E2-6
E2-9
Zoom curve mode
The characteristics of the zoom speed, which is established
in response to the amount by which the zoom seesaw
switch is pushed in or the amount by which the thumb ring
on the analog demand is tilted, can be changed.
Zoom curve mode setting E2-26
[ Z.M. ]
13
14
5
7
6
8
TOP SCREEN