User Manual

E2-29
2.14 Function allocation to seesaw switch
The {Zoom} or {Iris} operation function can be allocated to the zoom seesaw switch.
Precautions when the iris function has been allocated
Note 1: Zoom operations cannot be performed using the seesaw switch.
Note 2: Before the iris is to be operated using the rocker switch, the iris mode must be set to MANUAL.
Note 3: When the TELE side is pushed down, the iris operation is set to the OPEN side; conversely, when the
WIDE side is pushed down, it is set to the CLOSE side.
Note 4: The zoom speed adjustment function takes effect, and the maximum iris speed can be changed. (See
page E3-59)
[ I-Gain ] [Trk]
OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
Zoom
Iris
Set
1 ޓMove the key six times and the key once.
2 ޓPush the key.
Set
4 ޓPush the key.
The display starts blinking.
Move the left or right key to select {Zoom} or {Iris}.
The display stops blinking and reverts to being
highlighted, and the setting is entered.
The last setting function or default function is highlighted.
3 ޓMove the key or key.
Top initial screen
[ I-Tq ] H
[ Frm1 ] [ Frm2 ]
[ ]
MENU
1
Norm
AM
Zoom
[ Z.M. ]
[ I-Tq ] H
[ Frm1 ] [ Frm2 ]
[ ]
MENU
1
Norm
AM
Iris
[ Z.M. ]
(D)㧦Default value
(D)
Set
or
ZoomSelection item
Function
Iris
Zoom operations Iris operations
MENU
Set
6
Zoom
2.14 Function allocation to seesaw switch
Prior to operation, select the user for whom the settings will
be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT
TOP SCREEN