User Manual

E3-6
3.2 User Screen - Resetting the settings for one user
The display is switched to the User screen.
2 ޓ Move the key three times.
3 ޓ Push the key.
4 ޓ Move the key.
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
Name:
User
ResetAll
Copy
1
User 1
Reset Now.
ResetAll
User
User:
AllUser:
1
y/n
y/n
Name:
User
ResetAll
Copy
1
㧙㧙㧙㧙㧙㧙㧙㧙
1
ޓ
Push the key.
Set
The operator is asked whether
the pre-selected user is to be reset.
The display is switched to the Reset screen.
Set
6 ޓ Push the key to enter the decision.
The screen temporarily shows "Now resetting,"
and the display returns to Title Reset
.
This completes the resetting.
5 ޓMove the key to select {y}.
Set
No. :
User
1
Name:
ResetAll
1
ResetAll
User
User:
AllUser:
1
y/n
y/n
ResetAll
User
User:
AllUser:
1
y/n
y/n
A 㧙㧙㧙㧙㧙㧙㧙
A 㧙㧙㧙㧙㧙㧙㧙
Top initial screen
User screen
Title Reset
Title Reset
Reset screen
An underline appears below [ResetAll].
or
Set
MENU
Set
User
1
Set
3
(1) Resetting the settings for one user
The settings established for one user can be reset so that they can return to the default values.
The operating steps taken be-
tween steps 1 to 5 (within the
two dotted parallel lines) can
be undone without resetting the
settings. To return to the original
screen, move the up key. To turn
off the display without resetting
the settings, push the DISPLAY
switch.
Note: The iris gain, F-Hold setting, Encoder output setting, Initialize opera-
tion setting and Camera Fol Voltage are the only values which are not
reset. The value established prior to initialization remains unchanged.
Resetting
Prior to operation, select the user for whom the settings will
be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT