User Manual

E3-15
3.2 User Screen - Lock mode settings (User 0 to 9)
The lock mode can be set for specic functions to ensure that the functions which have been locked will not
be easily changed. It cannot be set differently for individual users, and once it has been set, it applies to all
users. For details on the lock mode while the analog mode is established, refer to page E3-19 to E3-22.
(1)
Lock operation
Continued on next page
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
2ޓMove the key six times.
No. :
User
1
Name:
ResetAll
1
Top initial screen
User screen
The last setting or default value is highlighted.
The display is switched to the User screen.
User
Copy
ToOtherLens
1
Access:
Unlock
Set
3ޓPush the key.
Set
1ޓPush the key.
Unlocked Locked
[ ]
Lock
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
MENU
Lock mode settings (User 0 to 9)
Concerning the password
This model does not have a special password setting screen. The password which is established every time
a lock operation is performed is the password which is needed to unlock the function. This means that you
should make a note of each password. If you have forgotten the password, contact Canon or one of its distribu-
tors. Anything from blanks to a maximum of 8 digits can be input as the password.
※
(NOTE)
While the lock mode is established, the following items can be set and the other items can no longer be set.
•Preset data(Shtl Shot position,Frame Preset position,preset speed)
•Zoom Track position and its ON/OFF setting
•Auto Iris Gain setting
•F-Hold setting
•Encoder output setting
•Adjustment of Camera Fol Voltage
※
(NOTE)
When a numeral from 0 to 9 is found in the User No. display area, it means that the function is unlocked.
When the letters that spell "Lock" are found in the User No. display area, it means that the function is locked.
※
(NOTE)
MENU SCREEN