User Manual

E3-38
3.4 Preset Screen - Setting the Frame Preset1 focus to ON or OFF (“A” type lens only)
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
Frame1:
Preset
PRE
Frame2: PRE
ZSpeed: 800
Frame1:
Preset
FAST
Frame2: PRE
ZSpeed: 800
Frame1:
Preset
PRE
Focus:
OFF
Zoom: ON
Frame1:
Preset
PRE
Focus:
ON
Zoom: ON
Frame1:
Preset
PRE
Frame2: PRE
ZSpeed: 800
2ޓMove the key.
3ޓPush the key, and move the key twice.
1ޓPush the key, and move the key twice.
Set
Set
The display is switched to the Preset screen.
4ޓMove the key or key.
5ޓPush the key.
Top initial screen
Preset screen
Screen A
Screen A
Frame1 screen
An underline appears below [Frame1].
Move the left or right key to select {ON} or {OFF}.
Set
The display is switched to the Frame1 screen.
An underline appears below [Focus], and the
last setting or default value is highlighted.
The display returns to Screen A
.
(D)㧦Default value
(D)
Selection item
Function
Set Set
2 2
Preset
or
MENU
Set
OFF ON
Focus operations disabled Focus operations enabled
The focus operations up to the memory position can be enabled or disabled.
(Bear in mind that the display is switched to another screen when this setting is performed.)
Note: This item can be selected with the “A” type lens only. There is no [Focus] display with the “R” type lens.
Setting the Frame Preset1 focus to ON or OFF
(“A” type lens only)
Top
Prior to operation, select the user for whom the settings will
be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT