User Manual

E3-42
3.4 Preset Screen - Setting the zoom speed in the preset mode
2 ޓ Move the key three times.
3 ޓ Move the key or key.
[ I-Gain ] [Trk] OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
1 ޓ Push the key, and move the key twice.
Set
Frame2:
Preset
PRE
ZSpeed:
ZMovement
800
Frame2:
Preset
PRE
ZSpeed:
ZMovement
500
Frame1:
Preset
PRE
Frame2: PRE
ZSpeed: 800
The display is switched to the Preset screen.
Top initial screen
Preset screen
An underline appears below [ZSpeed].
The last setting or default value is highlighted.
Move the left or right key until the number to be
changed to appears.
(D)㧦Default value
(D)
2 3
Preset
or
MENU
Set
001 㨪Selection item
Function
800
Minimum speed Maximum speed
The zoom speed from any position up to the memory position can be set. There are two ways to change the
speed setting: one involves using the Memo button (refer to the Lens Manual), and the other is through dis-
play operations.
Either way can be used, but the setting established last takes precedence.
Note: The same setting value applies to both Frame1 and Frame2.
Setting the zoom speed in the preset mode
Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT