User Manual

E3-50
The display is switched to the Iris screen.
Top initial screen
Iris screen
[ I-Gain ] [Trk]
OFF
Shtl VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
㧖㧦This appears when ON
is selected as the
[Comp] setting.
㧖
㧖
1
ޓPush the key, and move the key
three times.
3ޓMove the key or key.
Set
2ޓ Move the key four times.
An underline appears below [Close].
The function set last or default function is highlighted.
Move the left or right key to select {ON} or {OFF}.
Iris
[ ]
[ I-Gain ]
Torque: High
Comp: ON
Iris
[ ]
Comp:
Torque: High
ON
Close:
OFF
Iris
[ ]
Comp:
Close:
Torque: High
ON
ON
OFFSelection item
Function
ON
No iris close detection Iris close detection
Set
2
3
4
(D)㧦Default value
(D)
or
MENU
Iris
[ ]
This iris cannot be closed when the extender (2.0x) is inserted while the iris correction function is set to ON.
To compensate for this, a function which closes the iris when iris close has been detected can be set.
Note: Iris close detection takes effect when the iris correction function is set to ON.
Note: Depending on the
camera, it may not be
possible for the iris to
operate properly due to
the interaction between
the iris correction func-
tion of the lens and the
iris control exercised
from the camera. At such
a time, set the iris close
detection to OFF.
3.5 Iris Screen - Setting the iris close detection to ON or OFF
Setting the iris close detection to ON or OFF
Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT