User Manual

E3-53
3.6 Zoom Screen - Setting F-Hold to ON or OFF
The display is switched to the Zoom screen.
Top initial screen
Zoom screen
3 ޓ Move the key or key.
[ I-Gain ] [Trk] OFF
A 1
A 2
V
[ ]
MENU
1
Shtl VTR
FRM1 RET
R
1 ޓ Push the key, and move the key four times.
Set
2 ޓ Move the key twice.
Move the left or right key to set the function to {ON}
or {OFF}.
An underline appears below [F-Hold].
The function set last or default function is highlighted.
Tracking
F-Hold:
Movement
Zoom
[ ]
OFF
OFFOFF
Tracking
F-Hold:
Movement
Zoom
[ ]
OFF
ONON
Tracking:
F-Hold: OFF
OFF
Movement
Zoom
[ ]
or
(D)㧦Default value
(D)
OFFSelection item
Function
ON
F-Hold disabled F-Hold enabled
Set
2
4
2
MENU
Zoom
[ ]
F-Hold can be set to ON or OFF.
The same F-Hold setting can be used for all the users regardless of the user who is indicated on the display.
For this reason, there is no need to select the user before performing the setting. As an exception to the gen-
eral rule, any change made in the setting is reflected for user 0 as well.
Note: The F-Hold setting is not reset even when the steps described in “resetting” on page E3-6 are taken.
Note: When Iris is set as Auto, F-Hold can not be set on.
Setting F-Hold to ON or OFF
MENU SCREEN
Note: The F-Hold setting is not stored in the memory when the power is turned off. When the power is turned
on again, {OFF} is established as the default setting.