User Manual

E3-56
3.6 Zoom Screen - Setting the zoom mechanism end stop characteristics
Setting the zoom mechanism end stop characteristics
Movement screen
3 ࠉ Push the key.
4 ࠉ Move the key three times.
6 ࠉ Push the key.
[ I-Gain ] [Trk] OFF
A 1
A 2
V
[ ]
MENU
1
Shtl VTR
FRM1 RET
R
5 ࠉ Move the key or key.
The display is switched to the Zoom screen.
Screen A
The display is switched to the Movement screen.
The display returns to Screen A
.
Zoom screen
Top initial screen
1 ࠉ Push the key, and move the key four times.
Set
Set
Set
2 ࠉ Move the key three times.
Move the left or right key until the function to be
changed to appears.
An underline appears below [Movement].
An underline appears below [End].
The function set last or default function is highlighted.
Movement
Zoom
Stop:
Start:
[ ]
99
91
Movement
Zoom
End:
Stop:
[ ]
D99
99
Movement
Zoom
End:
Stop:
[ ]
97
99
Tracking:
F-Hold: OFF
OFF
OFF
Movement
Zoom
[ ]
F-Hold:
Movement
CurveMode
Zoom
[ ]
(D)㧦Default value
(D)
or
00 㨪Selection item
Function
99
Slow stop Quick stop
Set SetSet
2
4
3 3
MENU
Zoom
[ ]
The characteristics applying when a zoom operation, which has been performed using a switch such as the
zoom seesaw switch, is stopped at the zoom mechanism end can be set.
Prior to operation, select the user for whom the settings will
be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT