User Manual

E3-58
3.6 Zoom Screen - Setting the analog demand curve characteristics
CurveMode screen
3ޓPush the key.
4ޓMove the key twice.
6ޓPush the key.
[ I-Gain ] [Trk] OFF
A 1
A 2
V
R
[ ]
MENU
1
CurveMode
Zoom
Demand:
Seesaw:
[ ]
5
5
Shtl
VTR
FRM1 RET
5ޓMove the key or key.
1ޓPush the key, and move the key four times.
Set
Set
Set
2ޓMove the key four times.
Movement
CurveMode
SpeedAdj
Zoom
[ ]
OFF
Move the left or right key until
the function to be changed to appears.
An underline appears below [CurveMode].
CurveMode
Zoom
Demand:
Seesaw:
[ ]
5
CurveMode
Zoom
Demand:
Seesaw:
[ ]
5
An underline appears below [Demand].
The function set last or default function
highlighted.
D5
7
Tracking:
F-Hold: OFF
OFF
Movement
Zoom
[ ]
The display is switched to the Zoom screen.
Screen A
The display is switched to the CurveMode screen.
The display returns to Screen A
.
Zoom screen
Top initial screen
or
D㧦Default value
1 Selection item 2 3 4 D5 6 7 8 9
Set SetSet
2
4
4 2
MENU
Zoom
[ ]
The characteristics of the zoom speed can be varied in response to the amount by which the analog demand
is tilted.
(Bear in mind that the display is switched to another screen when these characteristics are set.)
(1)
(9)
Zoom speed
MAX
Amount by which analog demand is tilted
Zoom direction
Wide angle Telephoto
Amount of change resulting
from zoom mode adjustment
Setting the analog demand curve characteristics
Top
Prior to operation, select the user for whom the settings will
be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT