User Manual

E3-61
3.6 Zoom Screen - Setting the servo type from the zoom demand
3 ޓMove the key or key.
[ I-Gain ] [Trk] OFF
A 1
A 2
V
R
[ ]
MENU
1
Shtl VTR
FRM1 RET
The display is switched to the Zoom screen.
Zoom screen
Top initial screen
1 ޓPush the key, and move the key four times.
Set
2 ޓMove the key five times.
SpeedAdj
Control:
VR-Dem: ON
Zoom
[ ]
Sped
SpeedAdj
Control:
VR-Dem: ON
Zoom
[ ]
Posi
An underline appears below [Control].
The function set last or default function is highlighted.
Move the left or right key to select {Sped} or {Posi}.
Tracking:
F-Hold: OFF
OFF
Movement
Zoom
[ ]
or
(D)㧦Default value
(D)
SpedSelection item
Function
Posi
Speed servo Position servo
Set
2
4
6
MENU
Zoom
[ ]
Either the speed servo or position servo can be set as the servo type from the zoom demand.
Note: When {Posi} has been selected, the seesaw switch can no longer be used.
When {Posi} has been selected, only one demand connector can be connected.
Normally, {Sped} is selected.
Setting the servo type from the zoom demand
MENU SCREEN
Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E2-5 or E3-4.)
IMPORTANT