User Manual

E3-71
3.8 Info Screen - Setting the camera serial communication to ON or OFF
As an interface between the camera and the lens, two ways of control, the serial communication control and the
analog control, are used. Use this setting to switch between the automatic identication setting and the analog
control setting of the interface. The default setting is “ON: enabled” and with this setting, the lens automatically
identies the control setting as whether the serial communication control or the analog control. Set to “OFF:
disabled” for selecting the analog control as an interface between the lens and the camera.
The display is switched to the User screen.
Top initial screen
Info screen
[ I-Gain ] [Trk] OFF
A 1
A 2
V
R
[ ]
MENU
1
Shtl VTR
FRM1 RET
2ޓMove the key six times.
1ޓPush the key.
Set
The display is switched to the Info screen.
3ޓMove the key three times.
An underline appears below [CamSeri].
4ޓMove the key or key.
Move the left or right key to select {ON} or {OFF}.
User screen
No. :
User
1
Name:
ResetAll
1
Encoder: OFF
ON
Info
Initialize
CamSeri:
Info
OFF
Info
CamSeri:
Initialize
ON
CamSeri:
Initialize
Adjus t
Adjus t
(D)㧦Default value
(D)
Selection item
Function
ON OFF
Camera serial communication
enabled
or
Camera serial communication
disabled
3
Set
6
MENU
Info
Setting the camera serial communication to ON or OFF
MENU SCREEN