User Manual

E3-72
3.8 Info Screen - Adjustment of Camera Fol Voltage
Adjustment of Camera Fol Voltage
The camera fol voltage is adjusted at the time of shipment. There is no need to change usually.
However, the lens side can be changed by the situation on the camera side (indicators, etc.).
The camera fol voltage is used by all users.
There are the voltages sent back to the camera for zoom, iris and focus.
A password is required in order to ensure that the content of the setting is not easily changed.
Please contact Canon Inc. or the distributing agent when you need the password.
This operation cannot be done in the analog mode.
3ࠉ Push the key.
4
ࠉ Move the key or key.
5ࠉ Move the key once to select Iris.
ࠉࠉ Move the key twice to select Zoom.
ࠉࠉ Move the key three times to select Focus.
ࠉࠉ Then, push the key.
The display is switched to the Info screen.
Top initial screen
Info screen
[ I-Gain ] [Trk] OFF
A 1
A 2
V
R
[ ]
MENU
1
Shtl VTR
FRM1 RET
Continued on next page
2ࠉ Move the key four times.
An underline appears below [Adjust].
1ࠉ Push the key, and move the key twice.
Set
Set
The display is switched to the Camera Fol screen.
Set
The display now changes to the EnterPassword screen.
Set
Encoder: OFF
Initialize
Info
Initialize
Info
Adjust
Camera Fol
CamSeri:
Adjust
Iris:
Zoom:
Focus:
Camera Fol
EnterPassword
ON
CamSeri:
ON