User Manual

Follow Focus Control Adaptor FC-AF1
Circuit Diagram of Controller for AF lenses
1
2
3
4
5
6
7
8
9
10
11
12
Focus mode
Zoom mode
GND
Iris Remote/Camera
Iris cont
Power(DC12V)
Signal Common(+5.0V)
Focus control
Zoom control
Iris mode
+V1(+7.5V)
-V1(+2.5V)
Position:+7.5V
Position:+7.5V
Remote:GND
Close:+7.5V
Close:+7.5V
Close:+2.5V
Far:+7.5V
Tele:+7.5V
Position:+7.5V
Speed:OPEN
Speed:OPEN
Camera:OPEN
Open:+2.5V
Open:+2.5V
Open:+7.5V
Near:+2.5V *1
Wide:+2.5V
Speed:OPEN
AF:+2.5V *1
Standard
KTSM Type *2
Speed mode
Position mode
*1 When Pin No. 1 is controlled by the AF (+2.5V) mode, it is necessary
that Pin No. 8 is controlled by the Focus Speed Servo (+5V±2.5V).
If Pin No.8 is commanded to move by the Focus Speed Servo Signal
during the AF mode, the command will take precedence over the AF
control. However, if Pin No.8 is commanded to move by the Focus
Position Servo Signal during the AF mode, the focus will be
uncontrollable. Please be mindful of the Remote Manual Control
Signal during the AF mode.
*2 A special version of the 16x, the YH16x7 KTSM has been designed to
interface with the Panasonic AW-E650/E655 when used together with
Panasonic's Pan-Tilt systems
•For using with Sony DXC-990 or Panasonic AW-E650/E655, please
contact Canon Sales office for further infomation.
Positional Servo / AF Controller
TCR-AF1
http://www.canon.com/bctv
PRINTED IN JAPAN
Pub: 0066W778 0606SZ1
REMOTE CONTROL INTERFACE
YH16x7 KTS-AF:

Summary of content (8 pages)