Operation Manual

Chapter 8 Receiving Faxes 8-3
Receiving Faxes
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your machine to automatically switch between fax and voice calls.
Setting Fax/Tel Mode
Your machine is factory-set to Fax/Tel Mode. If you have not changed the receive
mode to FAX ONLY MODE or DRPD, simply follow this procedure:
1 Press Function, then Receive Mode.
2 Press ∂ or ¨ to select Fax/Tel Mode.
3 Press Set.
• The LCD changes to this display:
If Fax/Tel Mode does not appear in the LCD, follow this procedure to set FAX/TEL
AUTO SW (Fax/Tel Mode):
1 Press Function.
2 Press Data Registration.
3 Press Set.
4 Use ∂ or ¨ to select RX SETTINGS.
5 Press Set.
6 Use ∂ or ¨ to select RX MODE.
7 Press Set.
8 Use ∂ or ¨ to select FAX/TEL AUTO SW.
9 Press Set.
•To set the options for FAX/TEL AUTO SW
(Fax/Tel Mode), see the following pages.
10 Press Stop/Reset to return to standby
mode.
11 Confirm that FaxTel is displayed in the LCD.
• If FaxTel is not displayed, follow steps 1 to 3
on top of this page.
12/26 FaxTel
12/26 FaxTel
RING START TIME
FAX/TEL AUTO SW
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION
12/26 FaxTel
Fax/Tel Mode