User`s guide

Turning the Printer ON/OFF
1-10
Before You Start Using This Printer
1
Turning the Printer ON/OFF
The power switch to turn the printer ON or OFF is located on the right side of the
printer. Be sure to observe the following instructions in order to prevent unexpected
problems.
Turning the Printer ON
In order to use this printer, you should press " " of the power switch to turn the
printer ON. After running a self-diagnostic test, the printer will be ready to print.
IMPORTANT
• Do not turn the power ON immediately after turning it OFF. When cycling the power of the
printer, after turning the power OFF, wait for 10 seconds or longer before turning it ON
again.
• If the printer does not operate properly, or an error message appears in the Printer Status
Window, see "Troubleshooting," on p. 6-1.
• Before turning the power ON, make sure that paper is not loaded in the manual feed slot.
If you turn the power ON when paper is loaded in the manual feed slot, this may cause
paper jams.
• When you turn the power of the printer ON for the first time after you install the printer, a
blank sheet may be delivered. However, this is not abnormal.
1 Press " " of the power switch to turn the printer ON.
ON
OFF