User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Printing Results Are Not Satisfactory
23FJ-04W
Dirt inside the machine may affect printing r
esults. Perform care and cleaning to the machine rst.
Regular
Cleaning
(P. 240)
Smudge Marks Appear on the Edge of Printouts
Are you using appropriate paper?
● Check
the supported paper types and replace with an appropriate type. Also, set the paper size and type
correctly.
Available Paper(P. 317)
Loading Paper(P. 94)
Specifying Paper Size and Type(P. 105)
Do you print data without margins?
● This
symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab
[Advanced Settings] [Expand Print Region and Print] [Off]
Smudges Appear on Printouts
Are you using appropriate paper?
● Check usable paper, and r
eplace with appropriate paper.
Available Paper(P. 317)
Loading Paper(P. 94)
● If
using the appropriate paper still does not solve the problem, changing the <Special Printing Mode A>
setting may solve the problem. <Mode 2> can improve the quality more signicantly than <Mode 1>.
<Special Processing>(P. 226)
Troubleshooting
272