User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
A Portion of the Page Is Not Printed
Do you print data without margins?
● This
symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab
[Advanced Settings] [Expand Print Region and Print] [Off]
Do the paper guides align with the edges of the paper?
● If the paper guides ar
e too loose or too tight, part of a document may not be printed.
Loading Paper(P. 94)
Streaks Appear/Printing is Uneven
Are you using appropriate paper?
● Check usable paper, and r
eplace with appropriate paper.
Available Paper(P. 317)
Loading Paper(P. 94)
Have you cleaned the xing unit?
● Clean the xing unit.
Cleaning the Fixing Assembly(P. 242)
Ar
e you using rough-surface paper?
● Printed images may be faint when they are printed on rough-surface paper. Setting <Special Printing
Mode Q> to <On> may solve the problem.
<Special Processing>(P. 226)
Troubleshooting
276