User Guide

Sets open system authentication, which is also called "open authentication."
<Shar
ed Key>
Uses the WEP key as a password.
When <Open System> is selected
● When connecting to a wir
eless LAN, the machine experiences an authentication error if the shared key
authentication is set on the wireless router. If this happens, the machine automatically changes the
setting to <Shared Key> and retries the connection.
3
Select the WEP key you want to edit.
● Select <Edit WEP Key>
WEP key (1 to 4).
● Up to four WEP k
eys can be registered.
4
Enter the network key that you have written down.
● Enter the network key, and select <Apply>.
5
Select the desired WEP key.
● Select <Select WEP Key>
select the WEP key you have edited.
Using WPA-PSK or WPA2-PSK
1
Select <WPA/WPA2-PSK>.
2
Select an encryption method.
<Auto>
Sets the machine to automatically select AES-C
CMP or TKIP to match the setting of the wireless router.
<AES-CCMP>
Sets AES-CCMP as the encryption method.
3
Enter the network key that you have written down.
● Enter the network key, and select <Apply>.
8
Select <Yes>.
If an error message is displayed during setup
● Select <Close>, check whether the specied settings ar
e correct, and return to step 5.
9
Wait until message <Connected.> is displayed.
➠ W
ait several minutes until the IP address and other items are set automatically.
Setting Up
34