LBP215x / LBP214dw / LBP212dw User's Guide USRMA-3050-01 2018-12 en Copyright CANON INC.
Contents Important Safety Instructions ........................................................................................................... Installation ............................................................................................................................................................... 3 Power Supply Handling 2 ............................................................................................................................................................ 5 ..
Front Side .......................................................................................................................................................... 88 Back Side ........................................................................................................................................................... 90 Interior ..............................................................................................................................................................
Linking with Mobile Devices ............................................................................................................ 185 Connecting with Mobile Devices ............................................................................................................................ 186 Connecting via a Wireless LAN Router (LAN Connection) .............................................................................................................
Setting Menu List ...................................................................................................................................... ....................................................................................................................................................... 287 ............................................................................................................................................
When You Cannot Print Properly ............................................................................................................................ 419 Printing Results Are Not Satisfactory Paper Creases or Curls ................................................................................................................... 421 ...................................................................................................................................... 432 Paper Is Fed Incorrectly .
Important Safety Instructions Important Safety Instructions Important Safety Instructions ................................................................................................................... 2 Installation ............................................................................................................................................................ 3 Power Supply ......................................................................................................................
Important Safety Instructions Important Safety Instructions 2822-000 The content described in this chapter is for the prevention of damage to property and injury to users of the machine and others. Before using this machine, read this chapter and follow the instructions to properly use this machine. Do not perform any operations not described in this manual.
Important Safety Instructions Installation 2822-001 To use this machine safely and comfortably, carefully read the following precautions and install the machine in an appropriate location.
Important Safety Instructions Avoid poorly ventilated locations ● This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated.
Important Safety Instructions Power Supply 2822-002 ● Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock. ● The machine must be connected to a socket-outlet with grounding connection by the provided power cord. ● Do not use power cords other than the one provided, as this may result in a fire or electrical shock. ● The provided power cord is intended for use with this machine. Do not connect the power cord to other devices.
Important Safety Instructions Handling 2822-003 ● Immediately unplug the power plug from the AC power outlet and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fire or electrical shock. ● Do not disassemble or modify this machine. There are highvoltage and high-temperature components inside the machine which may result in a fire or electrical shock.
Important Safety Instructions ● Do not carry the machine with any of the paper drawer or optional cassette feeding module installed. Otherwise, they may fall, resulting in injury. Laser beam ● If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. When transporting the machine ● To prevent damage to the machine during transport, perform the following. - Remove the toner cartridge. - Securely pack the machine in the original box with packing materials.
Important Safety Instructions ● To prevent a paper jam, do not turn OFF the power, open/close the covers, and load/unload the paper when printing.
Important Safety Instructions Maintenance and Inspections 2822-004 Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to observe the following. If a problem occurs during operation, see Troubleshooting(P. 409) . If the problem cannot be resolved or you feel the machine requires an inspection, see When a Problem Cannot Be Solved(P. 464) . ● Before cleaning, turn OFF the power and unplug the power plug from the AC power outlet.
Important Safety Instructions Consumables 2822-005 ● Do not dispose of used toner cartridges or the like in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner to ignite, and result in burns or fire. ● If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation.
Important Safety Instructions ● Except when necessary, do not take out the toner cartridge from the packing material or from this machine. ● The toner cartridge is a magnetic product. Do not move it close to products susceptible to magnetism including floppy disks and disk drives. Doing so may result in data corruption. Storing the toner cartridge ● Store in the following environment to ensure safe and satisfactory use.
Important Safety Instructions ● The packing materials may be changed in form or placement, or may be added or removed without notice. ● After you pull out the sealing tape from the toner cartridge, dispose of it in accordance with the applicable local regulations.
Setting Up Setting Up Setting Up ............................................................................................................................................................. 14 Main Functions .................................................................................................................................................... 15 Preparations Required Before Use .....................................................................................................................
Setting Up Setting Up 2822-006 Before using the functions of the machine, the environmental conditions must be set in advance. To begin with, check the sequences of flow required to complete the setup, and then perform the actual settings. Preparations Required Before Use(P. 16) ● The functions installed on the machine vary depending on the model you purchased. Before using the machine, see Main Functions(P. 15) and check the available functions.
Setting Up Main Functions 2822-007 This manual covers all the functions of the model series you purchased. Before getting started, check which functions are available on the model you purchased.
Setting Up Preparations Required Before Use 2822-008 Set up the machine following steps 1 to 3 in order. For more information about a particular step, click on the link to go to the corresponding section. In addition, to use the machine safely, also check Preventing Unauthorized Access(P. 17) . Step 1 Setting Up Using the Setup Guide(P. 19) Step 2 Setting Up the Network Environment(P. 23) ● Configure the network settings that are not covered in the Setup Guide.
Setting Up Preventing Unauthorized Access 2822-009 This section describes the security measures on how to prevent unauthorized access from the external network. This is a must-read for all users and administrators before using this machine, other printers, and multifunction machines connected to the network.
Setting Up access from the external networks. If you want to assign a global IP address to and use a printer/ multifunction machine, contact your network administrator. Using Firewall to Restrict Transmission A firewall is a system that prevents unauthorized access from the external networks and protects against attacks/ intrusions to a local area network.
Setting Up Setting Up Using the Setup Guide 2822-00A 1660-009 When the machine is turned on ( Turning ON the Machine(P. 98) ) for the first time, the Setup Guide starts up to assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the setting screens are displayed in the following order.
Setting Up 1 Select . ● If you select , wireless LAN is not set, and the Setup Guide proceeds to step 5. 2 Select . 3 Select the setting method. ● For more information about the wireless LAN settings, see Wireless LAN(P. 27) . Step 5 Connecting to a Viewing Application Library The one-touch button referred to as "Application Library" is provided in the Home screen. You can read the description of each function. 1 To finish the Setup Guide, select .
Setting Up Setting the Date/Time 2822-00C Set the date and time for the machine. The date and time are used as the reference for the functions specifying the time, therefore, they need to be set accurately. Setting the Time Zone(P. 21) Setting the Current Date and Time(P. 21) Setting the Daylight Saving Time(P. 22) Setting the Time Zone If the time zone setting is changed, the values set in are also changed accordingly. 1 Select
Setting Up Touch panel model ● Tap the entry field, and enter the date and time. Black and white LCD model ● Use 4 or to move the cursor, and enter the date and time using the numeric keys. Press ( ). ● Set
Setting Up Setting Up the Network Environment 2822-00E When connecting the machine to a wired or wireless local area network (LAN), you need to set an IP address unique to the selected network. Select "wired" or "wireless" depending on your communication environment and networking devices. For specific IP address settings, contact your Internet service provider or Network Administrator. ● If the machine is connected to an unsecured network, your personal information might be leaked to a third party.
Setting Up ● To connect to an IEEE 802.1X network, see Authentication Settings(P. 250) . Configuring IEEE 802.1X Select wired or wireless LAN. Selecting Wired LAN or Wireless LAN(P. 25) Connect to a wired or wireless LAN. ● Proceed to the section that corresponds to the setting you selected in step 2. Connecting to a Wired LAN(P. 26) Connecting to a Wireless LAN(P. 27) Set the IP address as necessary. ● At the time of purchase, the machine is set to automatically acquire an IP address.
Setting Up Selecting Wired LAN or Wireless LAN 2822-00F After you decide on wired or wireless LAN to connect the machine to the computer, select wired LAN or wireless LAN using the operation panel. Note that if you change the setting from to or vice versa, you will need to uninstall the drivers installed on your computer and then reinstall them. For more information, see the manuals for the relevant drivers on the online manual website. 1 Select
Setting Up Connecting to a Wired LAN 2822-00H Connect the machine to a computer via a router. Use a LAN cable to connect the machine to the router. 1 Connect a LAN cable. ● Connect the machine to a router by using a LAN cable. ● Push the connector in until it clicks into place. 2 Wait for several minutes. ➠ The IP address is set automatically. ● You can set the IP address manually. Setting IP Addresses(P. 40) LINKS Setting Up the Network Environment(P.
Setting Up Connecting to a Wireless LAN 2822-00J Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is equipped with Wi-Fi Protected Setup (WPS), configuring your network is automatic and easy. If your networking devices do not support automatic configuration, or if you want to specify authentication and encryption settings in detail, you need to manually set up the connection. Make sure that your computer is correctly connected to the network.
Setting Up ◼ PIN Code Mode Some WPS routers do not support the push button mode. If WPS PIN code mode is mentioned on the package or in the instruction manuals of your networking device, set up the connection by entering the PIN code. Setting Up Connection Using WPS PIN Code Mode(P. 31) ● If the wireless router is set to use WEP authentication, you may not be able to set up connection using WPS.
Setting Up Setting Up Connection Using WPS Push Button Mode 2822-00K 1660-00J If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button. ● How to operate the wireless router may vary on each device. See the instruction manuals for your networking device for help. 1 Select
Setting Up 8 Wait until message is displayed. 9 Select . ➠ Wait several minutes until the IP address and other items are set automatically. Signal strength ● When more than one wireless router is available for connection, the machine connects to the device with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication). ● You can set the IP address manually. Setting IP Addresses(P.
Setting Up Setting Up Connection Using WPS PIN Code Mode 2822-00L If your wireless router supports WPS PIN code mode, generate a PIN code with the machine and register the code to the networking device. ● How to operate the wireless router may vary on each device. See the instruction manuals for your networking device for help. From a Computer 1 Access your wireless router from a computer and display the screen for entering a WPS PIN code.
Setting Up ● The PIN code must be registered within 10 minutes after selecting in step 7. If an error message is displayed during setup ● Select and return to step 6. From the Operation Panel 9 10 Wait until the message is displayed. Select . ➠ Wait several minutes until the IP address and other items are set automatically. Signal strength ● When more than one wireless router is available for connection, the machine connects to the device with the strongest signal.
Setting Up Setting Up Connection by Selecting a Wireless Router 2822-00R You can search the wireless routers (or access points) available for connection and select one from the display of the machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the required setup information, including the SSID and network key ( Checking the SSID and Network Key(P. 39) ).
Setting Up To view details of security settings on the Touch panel model ● Select the wireless LAN router, and select . To return to the original screen, select . If your wireless router is not found ● Check whether the machine is properly installed and ready to connect to the network. Settings Problems(P. 412) 8 Installation/ Enter the network key that you have written down. ● Enter the network key, and select . ● On how to enter text, see 9 Entering Text(P. 116) . Select .
Setting Up If the IP address of the machine has changed ● In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the connection is maintained as long as the machine and the computer belong to the same subnet. LINKS Connecting to a Wireless LAN(P.
Setting Up Setting Up Connection by Specifying Detailed Settings 2822-00S If you want to specify the security settings in detail or cannot establish the wireless connection using the other procedures, manually enter all the required information for the wireless LAN connection. Before specifying detailed settings, check and write down the required information, including the SSID, network key, and wireless security protocols. Checking the SSID and Network Key(P. 39) 1 Select
Setting Up Sets open system authentication, which is also called "open authentication." Uses the WEP key as a password. When is selected ● When connecting to a wireless LAN, the machine experiences an authentication error if the shared key authentication is set on the wireless router. If this happens, the machine automatically changes the setting to and retries the connection. 3 Select the WEP key you want to edit.
Setting Up Sets AES-CCMP as the encryption method. 3 Enter the network key that you have written down. ● Enter the network key, and select . 8 Select . If an error message is displayed during setup ● Select , check whether the specified settings are correct, and return to step 5. 9 10 Wait until message is displayed. Select . ➠ Wait several minutes until the IP address and other items are set automatically.
Setting Up Checking the SSID and Network Key 2822-00U When manually setting up a wireless connection, you need to specify the SSID and network key of your wireless router. The SSID and network key may be indicated on these networking devices. Check your devices and write down the necessary information before setting up the connection. For more information, see the instruction manuals for your networking devices or contact your manufacturer. SSID A name given for identifying a specific wireless LAN.
Setting Up Setting IP Addresses 2822-00W Connecting the machine to a network requires a unique network IP address. Two versions of IP addresses are available: IPv4 and IPv6. Configure these settings depending on the network environment. To use IPv6 addresses, you need to properly configure the IPv4 address settings. Setting IPv4 Address(P. 41) Setting IPv6 Addresses(P.
Setting Up Setting IPv4 Address 2822-00X 1660-00W The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports ( Connecting to a Wired LAN(P. 26) ). You can test the network connection if necessary. Setting IPv4 Address(P. 41) Testing the Network Connection(P.
Setting Up Touch panel model ● Select in , and select
Setting Up Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer ( Starting Remote UI(P. 260) ). If a computer is not available, you can check the connection by using the operation panel ( Testing the Network Connection(P. 43) ). When you have changed the IP address after installing the printer driver ● You need to add a new port. Configuring Printer Ports(P. 54) Testing the Network Connection 1 Select
Setting Up Setting IPv6 Addresses 2822-00Y The IPv6 addresses of the machine can be configured via the Remote UI. Before setting IPv6 addresses, check the IPv4 address settings ( Viewing IPv4 Settings(P. 47) ). You need to set the correct IPv4 settings to use IPv6 addresses. The machine can use the following multiple IPv6 addresses: Type Description Link-local address An address that is only valid within a subnet or link and cannot be used to communicate with devices beyond a router.
Setting Up [Use IPv6] Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box. [Stateless Address 1] Select the check box when using a stateless address. When not using a stateless address, clear the check box. [Use Manual Address] When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default router address in the corresponding text boxes. [IP Address] Enter an IPv6 address.
Setting Up Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the machine. Starting Remote UI(P. 260) Selecting settings from the operation panel ● IPv6 settings can also be accessed from
Setting Up Viewing Network Settings 2822-010 Viewing IPv4 Settings(P. 47) Viewing IPv6 Settings(P. 47) Viewing the MAC Address for Wired LAN(P. 47) Viewing the MAC Address and Information for Wireless LAN(P. 48) ● The IP address is not correctly configured if it is displayed as "0.0.0.0". ● Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured.
Setting Up Viewing the MAC Address and Information for Wireless LAN 1 Select
Setting Up Setting IPv6 Addresses(P. 44) Configuring DNS(P.
Setting Up Configuring Settings for Communication with a Computer 2822-011 Specify the protocol and port when operating the machine from a computer via the network. Before configuring the machine for printing from a computer, perform the basic setup procedures. For more information, see the manuals for the relevant drivers on the online manual website. Configuring Printing Protocols and WSD Functions(P. 51) Configuring Printer Ports(P. 54) Setting Up Print Server(P.
Setting Up Configuring Printing Protocols and WSD Functions 2822-012 Configure the protocols that are used for printing documents from a networked computer. ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) . 1 Start the Remote UI and log in to System Manager Mode. Starting Remote UI(P. 260) 2 Click [Settings/Registration] on the Portal page. 3 Click [Network Settings].
Setting Up Configuring WSD 1 Select [WSD Settings] 2 Configure the settings as necessary. [Edit]. [Use WSD Printing] Select the check box to print via WSD. When not using WSD printing, clear the check box. [Use WSD Browsing] Select the check box to obtain information about the machine from a computer via WSD. This check box is automatically selected when the [Use WSD Printing] check box is selected.
Setting Up LINKS Configuring Printer Ports(P.
Setting Up Configuring Printer Ports 2822-013 Printing errors can occur when the IP address of the machine has been changed, or when a printer has been added via the Windows printer folder. These errors are typically caused by incorrect printer port settings. For example, an incorrect port number or port type may have been specified. In such situations, your attempt to print fails because the document data cannot reach the machine.
Setting Up ● When the next screen is displayed, follow the instructions on the screen. *When you select the [Device Type], select [Canon Network Printing Device with P9100] under [Standard]. 5 Click [Finish]. 6 Click [Close]. Changing the port type or number If the printing protocol (LPD or RAW) has been changed on the machine side ( Configuring Printing Protocols and WSD Functions(P. 51) ) or the port number has been changed ( Changing Port Numbers(P.
Setting Up LINKS Setting Up Print Server(P.
Setting Up Setting Up Print Server 2822-014 With a print server, you can reduce the load on the computer that you print from. The print server also makes it possible to install the drivers on each computer over the network, which saves you the trouble of installing the drivers on each computer by using the provided CD-ROM/DVD-ROM. To set up a computer on the network as a print server, configure the settings for sharing the printer.
Setting Up 1 Click [Additional Drivers]. 2 Select the check box for the bit architecture that other computers are running, and click [OK]. ● Select additional drivers from the following, according to the operating system of the print server. Print server Select the check box for 32-bit operating systems [x64] 64-bit operating systems [x86] under [Processor] ● If you do not know whether your Windows operating system is a 32-bit or 64-bit version, see Checking the Bit Architecture(P. 501) .
Setting Up 3 Follow the on-screen instructions to install the drivers. LINKS Printing from a Computer(P.
Setting Up Configuring the Machine for Your Network Environment 2822-015 The configuration of a network varies depending on the purpose of the network. The machine has been designed to be compatible with as many network configurations as possible, and it is equipped with a variety of technologies. Consult your Network Administrator and set a configuration to suit your network environment. Configuring Ethernet Settings(P. 61) Changing the Maximum Transmission Unit(P.
Setting Up Configuring Ethernet Settings 2822-016 Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode and the Ethernet type. In general, the machine can be used without changing the defaults ( (P. 314) ), but you can change these settings to suit your network environment. 1 Select
Setting Up Alternately sends and receives communication data. Select when the machine is connected to a networking device using half duplex. Simultaneously sends and receives communication data. Use this setting for most environments. 3 4 Select . select the Ethernet type. 5 For the touch panel model, select . 6 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Setting Up Changing the Maximum Transmission Unit 2822-017 In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a chunk of data into which the original data is divided before being sent. The maximum transmission unit (MTU) may vary on each network. Change the settings of the machine as necessary. For more information, contact your Network Administrator. 1 Select
Setting Up Setting a Wait Time for Connecting to a Network 2822-018 When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new device.
Setting Up Configuring DNS 2822-019 DNS (Domain Name System) provides a service for name resolution that associates a host (or domain) name with an IP address. Configure the DNS, mDNS, or DHCP option settings as necessary. Note that the procedures for configuring DNS are different for IPv4 and IPv6. ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) .
Setting Up [DHCP Option Settings] [Acquire Host Name] Select the check box to enable Option 12 to obtain the host name from the DHCP server. [DNS Dynamic Update] Select the check box to enable Option 81 to dynamically update the DNS records through the DHCP server. [Acquire DNS Server Address] Select the check box to enable Option 6 to obtain a DNS server address from the DHCP server. [Acquire Domain Name] Select the check box to enable Option 15 to obtain a domain name from the DHCP server.
Setting Up Adopted by Bonjour, mDNS (multicast DNS) is a protocol for associating a host name with an IP address without using DNS. Select the check box to enable mDNS and enter the mDNS name in the [mDNS Name] text box. 3 Click [OK]. Configuring IPv6 DNS 1 Select [IPv6 Settings] 2 Configure IPv6 DNS settings. [Edit]. ● The [Use IPv6] check box must be selected to configure the settings. Setting IPv6 Addresses(P.
Setting Up Select the check box to dynamically update the DNS records whenever the machine's IP address is changed. To specify the type(s) of addresses you want to register to the DNS server, select the check box for [Register Manual Address], [Register Stateful Address], or [Register Stateless Address]. To specify the interval between updates, enter the time in hours in the [DNS Dynamic Update Interval] text box.
Setting Up Configuring SMB 2822-01A Server Message Block (SMB) is a protocol for sharing resources, such as files and printers, among multiple devices on a network. You need to use it to configure the machine as a shared printer on an SMB network. Depending on your network, you may have to set the NetBIOS name and workgroup name. NetBIOS Name In a Windows network that uses NetBIOS, NetBIOS names are used for identifying network-connected computers as well as for file sharing and other network services.
Setting Up [NetBIOS Name] Enter alphanumeric characters for the NetBIOS name of the machine. [Workgroup Name] Enter alphanumeric characters for the name of the workgroup that the machine belongs to. ● NetBIOS names or workgroup names that start with an asterisk (*) cannot be registered to a WINS server. 6 Click [OK]. 7 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. LINKS Configuring WINS(P.
Setting Up Configuring WINS 2822-01C Windows Internet Name Service (WINS) is a name resolution service that associates a NetBIOS name (a computer or printer name in an SMB network) with an IP address. To enable WINS, the WINS server must be specified. ● In order to specify WINS server settings, NetBIOS name and workgroup name are required to be set. Configuring SMB(P. 69) ● The function is not available in an IPv6 network.
Setting Up ● If the IP address of the WINS server is obtained from a DHCP server, the obtained IP address overrides the IP address entered in the [WINS Server Address] text box. 6 Click [OK]. 7 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Selecting settings from the operation panel ● WINS settings can also be accessed from
Setting Up Monitoring and Controlling the Machine with SNMP 2822-01E Simple Network Management Protocol (SNMP) is a protocol for monitoring and controlling communication devices in a network by using Management Information Base (MIB). The machine supports SNMPv1 and security-enhanced SNMPv3. You can check the status of the machine from a computer when you print documents or use the Remote UI. You can enable either SNMPv1 or SNMPv3, or both at the same time.
Setting Up 5 Specify SNMPv1 settings. ● If you do not need to change SNMPv1 settings, proceed to the next step. [Use SNMPv1] Select the check box to enable SNMPv1. You can specify the rest of SNMPv1 settings only when this check box is selected. [Use Community Name 1]/[Use Community Name 2] Select the check box to specify a community name. If you do not need to specify a community name, clear the check box. [Community Name] Enter alphanumeric characters for the name of the community.
Setting Up [Use SNMPv3] Select the check box to enable SNMPv3. You can specify the rest of SNMPv3 settings only when this check box is selected. [Enable User] Select the check box to enable [User Settings 1]/[User Settings 2]/[User Settings 3]. To disable user settings, clear the corresponding check box. [User Name] Enter alphanumeric characters for the user name. [MIB Access Permission] Select [Read/Write] or [Read Only] for the access privileges to MIB objects.
Setting Up ● With SNMP, the printer management information, such as printing protocols and printer ports, can be monitored and obtained regularly from a computer on the network. [Acquire Printer Management Information from Host] Select the check box to enable monitoring of the printer management information of the machine via SNMP. To disable monitoring of the printer management information, clear the check box. 8 Click [OK]. 9 Restart the machine.
Setting Up Other Network Settings 2822-01F Configure the following items according to your network environment. Configuring SNTP(P. 77) Monitoring the Machine from the Device Management Systems(P. 78) Configuring SNTP Simple Network Time Protocol (SNTP) enables you to adjust the system clock by using the time server on the network. If SNTP is used, the time server is checked at the specified intervals; therefore, the correct time can always be maintained.
Setting Up Enter the IP address of the NTP or the SNTP server. If DNS is available on the network, you can enter a host name (or FQDN) consisting of alphanumeric characters instead (example: ntp.example.com). [Polling Interval] Specify the interval between one synchronization and the next. 6 Click [OK]. 7 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Setting Up ◼ Configuring SLP Communication with Device Management Software 1 Start the Remote UI and log in to System Manager Mode. UI(P. 260) 2 Click [Settings/Registration] on the Portal page. 3 Click [Network Settings]. 4 Specify SLP settings. Starting Remote Remote UI Screen(P. 261) Specifying multicast device discovery 1 Select [Multicast Discovery Settings] 2 Select the [Respond to Discovery] check box and specify the required settings. [Edit].
Setting Up [Notify] Select the check box to notify a device management software of the power status of the machine. When [Notify] is selected, you can expect the machine to avoid unnecessary communication during sleep mode and reduce the total power consumption. [Port Number] Change the port number for this function according to the network environment. [Number of Routers to Traverse] Specify how many routers the notification packets can pass through.
Setting Up Installing Drivers 2822-01H Install the various drivers and associated software on your computer. 1 Make the necessary preparation before proceeding with the installation. ● Install the optional devices on the main unit in advance. Optional Equipment(P. 489) ● If the machine is supplied with a CD-ROM/DVD-ROM, insert the CD-ROM/DVD-ROM into the drive on the computer. ● You can download drivers and software you are going to use from the Canon website (http:// www.canon.com/).
Basic Operations Basic Operations Basic Operations ............................................................................................................................................... 84 Parts and Their Functions ................................................................................................................................... 87 Front Side .............................................................................................................................................
Basic Operations Entering Sleep Mode ......................................................................................................................................... 154 Using a USB Memory Device .............................................................................................................................
Basic Operations Basic Operations 2822-01J This chapter describes basic operations, such as how to use the operation panel or how to load the paper, that are frequently performed to use the functions of the machine. ◼ Parts and Their Functions This section describes the exterior and interior parts of the machine and their functions, as well as how to use the keys on the operation panel and how to view the display. Parts and Their Functions(P.
Basic Operations ◼ Loading Paper This section describes how to load the paper into the paper drawer and multi-purpose tray. Loading Paper(P. 121) ◼ Customizing the Display This section describes how to rearrange the displayed items in order to make it easier to use screens shown in the display. Customizing the Display(P. 149) ◼ Changing the Default Settings for Functions This section describes how to change the setting that is displayed initially when a function is selected.
Basic Operations ◼ Entering Sleep Mode This section describes how to set the sleep mode. Entering Sleep Mode(P. 154) ◼ Using a USB Memory Device This section describes about the available USB memory devices and how to insert/remove the USB memory device. Using a USB Memory Device(P.
Basic Operations Parts and Their Functions 2822-01K This section describes the parts of the machine (exterior, front and back side, and interior) and how they function. In addition to describing the parts of the machine used for such basic operations as loading paper and replacing the toner cartridges, this section also describes the keys on the operation panel and display. Read this section for tips on how to use the machine properly. Front Side(P. 88) Back Side(P. 90) Interior(P.
Basic Operations Front Side 2822-01L USB port (for USB device connection) Use this port to connect a third-party USB memory device or USB keyboard. Connecting a USB memory device allows you to print data from the memory device. Printing from a USB Memory Device (Memory Media Print)(P. 173) Lift handles Hold the lift handles when carrying the machine. Relocating the Machine(P. 395) Ventilation slots Air from inside the machine is vented out to cool down the inside of the machine.
Basic Operations Paper drawer Load the type of paper you frequently use into the paper drawer. Drawer(P. 123) Loading Paper in the Paper Output tray Printed paper is output to the output tray. Power switch Turns the power ON or OFF. To restart the machine, turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Operation panel The operation panel consists of keys such as Home key, Stop key, a display, and status indicators.
Basic Operations Back Side 2822-01S Rear cover Open the rear cover when clearing paper jams. Clearing Paper Jams(P. 454) Ventilation slots Air from inside the machine is vented out to cool down the inside of the machine. Note that placing objects in front of the ventilation slots prevents ventilation. Rating label The label shows the serial number, which is needed when making inquiries about the machine. Problem Cannot Be Solved(P. 464) When a Power socket Connect the power cord.
Basic Operations Interior 2822-01U Transport guide (at the back) If there is a paper jam inside the machine, raise the transport guide toward the front of the machine to remove the jammed paper. Clearing Paper Jams(P. 454) Transport guide (at the front) If there is a paper jam inside the machine, raise the transport guide toward the back of the machine to remove the jammed paper. Clearing Paper Jams(P.
Basic Operations Multi-Purpose Tray 2822-01W Paper guides Adjust the paper guides to exactly the width of the loaded paper to ensure that paper is fed straight into the machine. Press the lock release lever that is indicated with an arrow in the illustration to release the lock and slide the paper guides. Paper tray Pull out the paper tray when loading paper. Tray extension Open the tray extension when loading large paper. LINKS Loading Paper in the Multi-Purpose Tray(P.
Basic Operations Paper Drawer 2822-01X Paper guides Adjust the paper guides to exactly the size of the loaded paper to ensure that paper is fed straight into the machine. Press the lock release levers that are indicated with arrows in the illustrations to release the locks and slide the paper guides. Paper level indicator Indicates the remaining amount of paper. The mark moves downward as the remaining amount of paper decreases. LINKS Loading Paper in the Paper Drawer(P.
Basic Operations Operation Panel 2822-08C Operation Panel of Touch Panel Model(P. 94) Operation Panel of Black and White LCD Model(P. 95) Operation Panel of Touch Panel Model ● The angle of the operation panel can be adjusted. Adjust it to an angle that is most comfortable for viewing the panel. Adjusting the Angle(P. 95) Display You can view the progress of the machine and error statuses. The display is also a touch panel, so you can specify settings by touching the screen directly. Basic Screens(P.
Basic Operations Home key Press to display the Home screen, which provides access to the setting menu and functions such as Memory Media Print and Secure Print. Home Screen(P. 104) Customizing the Home Screen(P. 150) Stop key Press to cancel printing and other operations. Adjusting the Angle When it is difficult to view the touch panel display, adjust the angle of the operation panel.
Basic Operations Numeric keys ([0]-[9] keys) Press to enter numbers and text. Entering Text on the Black and White LCD Model(P. 117) [*] key Press to switch the type of text that is entered. Data indicator Blinks while an operation is being performed, such as data transmission or printing. Lights up when there are documents waiting to be processed. Error indicator Blinks or lights up when an error such as a paper jam occurs. Energy Saver key Press to put the machine into sleep mode.
Basic Operations [ ] key When specifying settings, press to proceed to the next screen. When entering numbers, press to move the cursor to the right. [ ] key When specifying settings, press to select the item immediately below the currently selected item. When changing setting values, press to decrease a value. [ ] key Press to apply settings or specified details. LINKS Basic Operation(P.
Basic Operations Turning ON the Machine 2822-020 This section describes how to turn ON the machine. 1 Make sure that the power plug is firmly inserted into a power outlet. 2 Press the power switch. ➠ The Start screen appears. Operation Panel(P. 94) ● You can select the screen that is displayed first after the machine is turned ON. Startup/Restoration>(P. 288) LINKS Turning OFF the Machine(P.
Basic Operations Turning OFF the Machine 2822-021 This section describes how to turn OFF the machine. 1 Press the power switch. ● It may take some time for the machine to completely shut down. Do not unplug the power cord until the display turns off. ● To restart the machine, wait for at least 10 seconds after the machine is turned OFF. ● You can specify the time for each day of the week and configure a setting to automatically turn OFF the machine. Powering OFF at a Fixed Time(P.
Basic Operations Powering OFF at a Fixed Time 2822-022 You can make a setting so that the power is automatically tuned OFF at a specified time on each day of the week. This allows you to avoid useless power consumption that may occur due to failure to turn OFF the power. By default, this function is disabled. ● For information about the basic operation to set up the machine from Remote UI, see Options from Remote UI(P. 269) . 1 Start the Remote UI and log in to System Manager Mode.
Basic Operations Enter the desired time to turn OFF the power. For any day of the week, leaving the time field blank means that the auto shutdown function is disabled for that day. 5 Click [OK].
Basic Operations Using the Operation Panel 2822-023 You can use the display and keys of the operation panel to configure machine settings or operate functions. This section describes basic usage of the display and keys. Basic Screens(P. 103) Basic Operation(P. 111) Entering Text(P. 116) ● If you want to invert the light and dark parts of the display: ● If you want to adjust the brightness of the display: ● If you want to adjust the contrast of the display: (P. 320) (P.
Basic Operations Basic Screens 2822-024 The Home screen or settings screen appears on the display, allowing you to initiate functions such as Memory Media Print and Secure Print. You can also use the display to check information such as error messages and the machine's operation status. To operate the touch panel model, directly touch the display. Home Screen(P. 104) Screen(P. 107) Message Display(P.
Basic Operations Home Screen 2822-025 The Home screen is displayed when the power is turned ON or by pressing to specify settings for and register functions. on the operation panel. Use this screen Home Screen of Touch Panel Model(P. 104) Home Screen of Black and White LCD Model(P. 105) Home Screen of Touch Panel Model Change page Use this to view another page in the Home screen. You can also flick sideways to change pages.
Basic Operations Prints files stored in a USB memory device. Printing from a USB Memory Device (Memory Media Print) (P. 173) Use this function to print a secure document. Printing a Document Secured by a PIN (Secure Print)(P. 168)
Basic Operations Displays the amount remaining in the toner cartridges in stages. This is hidden while the Home screen is active.
Basic Operations Screen 2822-026 ), a screen appears in which you can check the progress of document processing When you press ( as well as the status of the machine (the amount of toner remaining in the toner cartridges, etc.) and network settings such as the machine's IP address. Screen of Touch Panel Model(P. 107) Screen of Black and White LCD Model(P.
Basic Operations Displays the serial number of the machine. Status and logs of printed and received documents Displays the current status of the selected item. The screen is shown below as an example. Displays the network settings such as the IP address of the machine and status such as the condition of wireless LAN communications. Viewing Network Settings(P. 47) Used to safely remove a USB memory device.
Basic Operations Displays whether paper is loaded in each paper source. Displays the amount of toner remaining in the toner cartridges. Other internal parts may reach the end of their lifetime before the toner runs out. Used to safely remove a USB memory device. This is only displayed when a USB memory device is connected to the machine. Remove the USB Memory Device(P. 156) Displays the total volume of printouts.
Basic Operations Message Display 2822-027 Messages are displayed on the screen in situations such as when paper runs out or when the expiration of the toner cartridge lifetime is reached. Countermeasures for Each Message(P. 436) Touch panel model Black and white LCD model When an Error Occurs In some cases when an error occurs, instructions on how to respond to the error are displayed. Follow the onscreen instructions to solve the problem.
Basic Operations Basic Operation 2822-08E Basic Operation of Touch Panel Model(P. 111) Basic Operation of Black and White LCD Model(P. 113) Basic Operation of Touch Panel Model The display is a touch panel, allowing you to operate directly on the screen. Avoid the following actions. ● The display may malfunction or be damaged. - Pressing forcefully - Pressing with pointed objects (fingernails, ballpoint pen, pencil, etc.
Basic Operations ◼ Selecting Items Tap an item name or button to make a selection. If an item is mistakenly touched ● Slide your finger away then release it from the screen to cancel the selection. To return to the previous screen ● Tap to return to the previous screen. ◼ Scrolling the Screen The scroll bar appears on the screen when there is still information that is undisplayed. If the scroll bar is displayed, flick the screen to scroll in the direction of the flick.
Basic Operations ◼ Changing the Setting Value Tap <+>/<-> to adjust the setting on the scale. You can also adjust a setting by flicking the slider left or right. ● You can change a variety of display-related settings, such as the display language: Settings>(P. 288) (P.
Basic Operations Changing Setting Values / to enter values. If an icon such as below is displayed at the upper left of the screen, you can Use enter values directly using the numeric keys. Entering Text(P. 116) ● Values in ( ) displayed below the entry box are the enterable value range. / Using Proceeding to the Next Screen/Returning to the Previous Screen Press to proceed to the next screen. Press to return to the previous screen.
Basic Operations ● You can change a variety of display-related settings, such as the display language: Settings>(P. 288) (P. 296) ● You can change a variety of accessibility-related settings, such as the scroll speed: 115 (P.
Basic Operations Entering Text 2822-029 Entering Text on the Touch Panel Model(P. 116) Entering Text on the Black and White LCD Model(P. 117) Entering Characters Using a USB Keyboard(P. 119) Entering Text on the Touch Panel Model When entering text or a number, use the keyboard displayed on the screen. The numeric keys are displayed on the screen to enter only numbers. Switching the Type of Character Tap or <1/#> to switch the type of character that is entered.
Basic Operations Value range ● The values in ( ) displayed the entry box are the enterable value range. When buttons other than the numeric keys are displayed ● When <+>/<-> or / are displayed, you can tap the buttons to increase or decrease the numeric value or move the cursor. Entering Text on the Black and White LCD Model Use the numeric keys to enter text and values. Switching the Type of Text Press to switch the type of text that is entered.
Basic Operations GHI ghi 4 JKL jkl 5 MNO mno 6 PQRS pqrs 7 TUV tuv 8 WXYZ wxyz 9 (Not available) 0 (space) -.*#!",;:^`_=/|'?$@%&+\~()[]{}<> (Not available) ● Press or select and press when the type of text that is entered is or to display enterable symbols in the screen. Use and press / / / to select the symbol you want to enter, . Deleting Text One character is deleted each time is pressed. Press and hold to delete all of the entered text.
Basic Operations Entering Characters Using a USB Keyboard You can connect a keyboard to the USB port for USB devices on the Front Side(P. 88) or Back Side(P. 90) and enter text from the keyboard. Even while the keyboard is connected, you can enter text from the operation panel. ● Some keys on the USB keyboard, such as the [Backspace], [Home] and [End] keys, cannot be used. When keys that cannot be used are pressed, nothing is entered or changed. ● To delete text, press the [Delete] key.
Basic Operations Logging in to the Machine 2822-02A If Department ID Management is enabled or System Manager IDs are enabled, you must log in before using the machine. When the login screen appears, use the procedure below to enter the Department ID and PIN. 1 Enter the ID. 1 Select or . 2 Enter the ID. ● If no PIN is registered, proceed to step 3. 2 Enter the PIN. 1 Select . 2 Enter the PIN. 3 Press ( ).
Basic Operations Loading Paper 2822-02C You can load the paper into the paper drawer or multi-purpose tray. Load the paper you usually use into the paper drawer. The paper drawer is convenient when using large amounts of paper. Use the multi-purpose tray when you temporarily use a size or type of paper that is not loaded in the paper drawer. See Available Paper(P. 478) for available paper sizes and types. About Paper Precautions for Paper(P. 121) Storing the Paper Printed with the Machine(P.
Basic Operations Paper handling and storage ● It is recommended that you use paper as soon as possible after unwrapping. Paper remaining unused should be covered with the original wrapping paper and stored on a flat surface. ● Keep the paper wrapped in its original package to protect the paper from moisture or dryness. ● Do not store the paper in such a way that may cause it to curl or fold. ● Do not store the paper vertically or do not stack too much paper.
Basic Operations Loading Paper in the Paper Drawer 2822-02E 1660-02Y Load the paper that you usually use in the paper drawer. When you want to print on paper that is not loaded in the paper drawer, load the paper in the multi-purpose tray. Loading Paper in the Multi-Purpose Tray(P. 128) Loading Regular Size Paper(P. 123) Loading Custom Size Paper(P. 125) ● When loading A5 size paper in the paper drawer of the main unit, see Paper(P. 125) .
Basic Operations ● Make sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage the paper drawer by dropping it, if it slides out too easily. 2 Adjust the positions of the paper guides to the paper size you want to use. ● While pressing the lock release lever, move the paper guide to align the projection to the appropriate paper size marking.
Basic Operations » Continue to Specifying Paper Size and Type in the Paper Drawer(P. 138) When changing the paper size or type ● The factory default settings for paper size and type are and , respectively. If you load a different size or type of paper into the machine, make sure to change the settings. If you do not change the settings, the machine cannot print properly. Printing on the Back Side of Printed Paper (Manual 2-Sided Printing) ● You can print on the back side of printed paper.
Basic Operations 3 Load the paper so that the edge of the paper stack is aligned against the front side of the paper drawer. ● Load the paper with the print side face down. ● Fan the paper stack well, and tap it on a flat surface to align the edges of the paper stack. Do not exceed the load limit line when loading paper ● Make sure that the paper stack does not exceed the load limit line ( ). Loading too much paper can cause paper jams.
Basic Operations Align the paper guides securely against the edges of the paper ● Paper guides that are too loose or too tight can cause misfeeds or paper jams. 5 Insert the paper drawer into the machine. ● When you insert the paper drawer with set to , a confirmation screen is displayed. » (P. 377) Continue to Specifying Paper Size and Type in the Paper Drawer(P.
Basic Operations Loading Paper in the Multi-Purpose Tray 2822-02F 1660-030 When you want to print on paper that is not loaded in the paper drawer, load the paper in the multi-purpose tray. Load the paper that you usually use in the paper drawer. Loading Paper in the Paper Drawer(P. 123) Make sure to insert the paper drawer ● The machine only prints when the paper drawer is inserted, even if paper is loaded in the multi-purpose tray.
Basic Operations 3 Spread the paper guides apart. ● Press the lock release lever to slide the paper guides outward. 4 Insert the paper into the multi-purpose tray until the paper stops. ● Load the paper with the print side face up. ● Fan the paper stack well, and tap it on a flat surface to align the edges of the paper stack. Do not exceed the load limit guide when loading paper ● Make sure that the paper stack does not exceed the load limit guide ( ). Loading too much paper can cause paper jams.
Basic Operations 5 Align the paper guides against the edges of the paper. ● Press the lock release lever and slide the paper guides inward until they are aligned securely against the edges of the paper. Align the paper guides securely against the edges of the paper ● Paper guides that are too loose or too tight can cause misfeeds or paper jams. » Continue to Specifying Paper Size and Type in the Multi-Purpose Tray(P.
Basic Operations Loading Envelopes 2822-02H Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes and which side is face up. You cannot load envelopes in the paper drawer. Before Loading Envelopes(P. 131) In the Multi-Purpose Tray(P. 132) ● This section describes how to load envelopes in the orientation you want, as well as procedures that you need to complete before loading envelopes.
Basic Operations In the Multi-Purpose Tray Load the envelopes Monarch, COM10, DL, or ISO-C5 in portrait orientation (with the short edge toward the machine), with the non-glued side (front side) face up. You cannot print on the reverse side of envelopes. ● Load the envelopes so that the edge with the flap is toward the left side as shown in the illustration.
Basic Operations Loading Preprinted Paper 2822-02J When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading. Load the paper properly so that printing is performed on the correct side of the paper with a logo. Making 1-Sided Printouts on Paper with Logos(P. 133) Making 2-Sided Printouts on Paper with Logos(P. 135) ● This section mainly describes how to load preprinted paper with the proper facing and orientation.
Basic Operations Printing on Paper with Logos in Landscape Orientation When loading paper in the paper drawer Load the paper with the logo side (the side to print the document) face down. When loading paper in the multi-purpose tray Load the paper with the logo side (the side to print the document) face up.
Basic Operations Making 2-Sided Printouts on Paper with Logos Printing on Paper with Logos in Portrait Orientation When loading paper in the paper drawer Load the paper with the front logo side (the side to print the first page of the document) face up. When loading paper in the multi-purpose tray Load the paper with the front logo side (the side to print the first page of the document) face down.
Basic Operations Printing on Paper with Logos in Landscape Orientation When loading paper in the paper drawer Load the paper with the front logo side (the side to print the first page of the document) face up. When loading paper in the multi-purpose tray Load the paper with the front logo side (the side to print the first page of the document) face down.
Basic Operations Specifying Paper Size and Type 2822-02K You must specify the paper size and type settings to match the paper that is loaded. Make sure to change the paper settings when you load the paper that is different from the previously loaded paper. Specifying Paper Size and Type in the Paper Drawer(P. 138) Specifying Paper Size and Type in the Multi-Purpose Tray(P. 140) Registering Default Paper Settings for the Multi-Purpose Tray(P. 142) Registering a Custom Paper Size(P.
Basic Operations Specifying Paper Size and Type in the Paper Drawer 2822-02L 1 Select in the Home screen. 2 Select the target paper drawer. Home Screen(P. 104) ● When the optional cassette feeding module is installed, its paper drawer is also displayed. Touch panel model 3 Black and white LCD model Select the paper size. ● If the loaded paper size is not displayed, select . When loading custom size paper (Touch panel model) 1 Select .
Basic Operations When loading A5 size paper ● In the landscape orientation, select . In the portrait orientation, select . Landscape orientation Portrait orientation About ● If you frequently need to change the paper to be loaded, set to ; this will reduce the number of steps required to change the setting each time. You can also display an error message when the setting in the printer driver is significantly different from the size of the loaded paper.
Basic Operations Specifying Paper Size and Type in the Multi-Purpose Tray 2822-02R The screen shown here is displayed when paper is loaded in the multi-purpose tray. Follow the on-screen instructions to specify settings that match the size and type of the loaded paper. If the screen shown above is not displayed when paper is loaded ● If you always load the same paper in the multi-purpose tray, you can skip the paper setting operations by registering the paper size and type as the default setting.
Basic Operations ● If you register the paper size you use frequently on buttons to , you can call them up with one touch. Registering a Custom Paper Size(P. 144) Black and white LCD model ● Execute the following steps in sequence: enter the paper width enter the paper length 3 Select . About ● If you frequently need to change the paper to be loaded, set to ; this will reduce the number of steps required to change the setting each time.
Basic Operations Registering Default Paper Settings for the MultiPurpose Tray 2822-02S You can register default paper settings for the multi-purpose tray. Registering default settings can save yourself the effort of having to specify the settings each time you load the same paper into the multi-purpose tray. ● After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting is always used.
Basic Operations ● If you register the paper size you use frequently on buttons to , you can call them up with one touch. Registering a Custom Paper Size(P. 144) Black and white LCD model ● Execute the following steps in sequence: enter the paper width enter the paper length 3 Select . About ● If you frequently need to change the paper to be loaded, set to ; this will reduce the number of steps required to change the setting each time.
Basic Operations Registering a Custom Paper Size 2822-02U You can register up to three frequently used custom paper sizes. 1 Select in the Home screen. 2 Select . 3 Select the registration number. Home Screen(P. 104) ● On the black and white LCD model, if you have selected the registered number, continue on to select . Deleting a setting ● Select 4 . Specify the length of the side and side.
Basic Operations About ● The machine operates based on the paper type setting in the printer driver. Setting to the registered custom size Touch panel model The paper sizes that are registered in the procedure above can be called when is selected on the paper size selection screen for the paper drawer or multi-purpose tray.
Basic Operations Limiting the Paper Sizes Displayed 2822-02W You can ensure that only frequently used paper sizes are shown in the screen for selecting the paper size setting. 1 Select in the Home screen. 2 Select
Basic Operations Automatically Selecting an Appropriate Paper Source for Each Function 2822-02X Enable or disable the automatic paper source selection feature for each paper source. If this feature is set to , the machine automatically selects a paper source that is loaded with paper of the appropriate size for each print job.
Basic Operations 6 Select .
Basic Operations Customizing the Display 2822-02Y In order to make the Home screen easier to use, you can customize it. Customizing the Home Screen You can rearrange the displayed items and customize the screen to make it easier to select functions. Customizing the Home Screen(P.
Basic Operations Customizing the Home Screen 2822-030 You can change the item display order to make it easier to access the Home screen, and customize the Home screen. Changing the Arrangement of Buttons (Touch Panel Model)(P. 150) Changing the Item Display Order (Black and White LCD Model)(P. 151) Changing the Arrangement of Buttons (Touch Panel Model) To make the buttons easier to use, you can rearrange the buttons however you like.
Basic Operations Changing the Item Display Order (Black and White LCD Model) To make the buttons easier to use, you can freely change the item display order. 1 Select in the Home screen. 2 Use / to select the item to be moved, and press . 3 Use / to move to the target position, and press . 4 When the buttons are rearranged in the way you want, press LINKS Basic Operation(P. 111) 151 Home Screen(P. 104) .
Basic Operations Changing the Default Settings for Functions 2822-031 The default settings are the settings that are displayed when you turn ON the machine. If you change these default settings to match the operations that you perform frequently, you can eliminate the need to specify the same settings every time you perform an action. ◼ Memory Media Print For information about changeable setting items, see (P. 367) .
Basic Operations Setting Sounds 2822-032 The machine produces sounds in a variety of situations, such as when a paper jam or error occurs. You can set the volume of each of these sounds individually. 1 Displaying the screen. Touch panel model Press ( ). Black and white LCD model Select
Basic Operations Entering Sleep Mode 2822-033 The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can on the operation panel. save power simply by pressing When in sleep mode ● When the machine enters sleep mode, lights up yellow green.
Basic Operations Touch panel model
Basic Operations Using a USB Memory Device 2822-01R When using a USB memory, insert it into the USB port on the machine. Before using a USB memory device ● The supported formats of USB memory device are FAT16 and FAT32.
Basic Operations Black and White LCD Model 1 Press 2 Select . 3 Select . . ➠ Wait until the message is displayed. 4 Disconnect the USB memory device. LINKS Printing from a USB Memory Device (Memory Media Print)(P.
Printing Printing Printing ................................................................................................................................................................ 159 Printing from a Computer ................................................................................................................................ 160 Canceling Prints ...........................................................................................................................................
Printing Printing 2822-034 There are many ways to use the machine as a printer. You can print documents on your computer by using the printer driver or print image files from a USB memory device. Make full use of the print functions to suit your needs. ◼ Printing from a Computer You can print a document made on your computer by using the printer driver. Printing from a Computer(P.
Printing Printing from a Computer 2822-035 You can print a document made with an application on your computer by using the printer driver. There are useful settings on the printer driver, such as enlarging/reducing and 2-sided printing, that enable you to print your documents in various ways. Before you can use this function, you need to complete some procedures, such as installing the printer driver on your computer.
Printing 1 Open a document in an application and display the print dialog box. 2 Select the printer driver for this machine, and click [Preferences] or [Properties]. 3 Specify the print settings as necessary, and click [OK]. ● Switch the tab according to the settings. 4 Click [Print] or [OK]. ➠ Printing starts. ● If you want to cancel printing, see Canceling Prints(P. 162) . LINKS Checking the Printing Status and Log(P. 165) When Printing from the Windows Store App(P.
Printing Canceling Prints 2822-036 You can cancel printing from your computer or on the operation panel of the machine. From a Computer(P. 162) From the Operation Panel(P. 163) From a Computer You can cancel printing from the printer icon displayed on the system tray on the desktop. 1 Double-click the printer icon. When the printer icon is not displayed ● Open the printer folder ( Displaying the Printer Folder(P.
Printing From the Operation Panel Cancel printing using ◼ Press or ( ). to Cancel If the Screen Displays a List of Documents When Select the document you want to cancel, and select is Pressed .
Printing LINKS Basic Printing Operations(P. 160) Checking the Printing Status and Log(P.
Printing Checking the Printing Status and Log 2822-037 You can check the current print statuses and the logs for printed documents. ● When is set to , you cannot check the print logs. (P. 376) Useful in the Following Cases ● When your documents are not printed for a long time, you may want to see the waiting list of the documents waiting to be printed.
Printing ➠ Displays detailed information about the document. ● The displayed document name or user name may not reflect the actual document or user name. When a three-digit number is shown in the case of ● This number represents an error code. Countermeasures for Each Error Code(P. 449) LINKS Basic Printing Operations(P. 160) Canceling Prints(P.
Printing Various Printing Methods 2822-038 This section describes how to print a document by adding a PIN, how to print a file stored on a USB memory device without using the printer driver, and how to receive and print I-Faxes. Printing a Document Secured by a PIN (Secure Print)(P. 168) Printing from a USB Memory Device (Memory Media Print) (P. 173) 167 Receiving I-Faxes for Printing(P.
Printing Printing a Document Secured by a PIN (Secure Print) 2822-039 By setting a PIN to a document when printing from a computer, the document is held in the memory of the machine, and is not printed until the correct PIN is entered on the operation panel of the machine. This function is called "Secure Print," and the document that is protected by a PIN is called a "secured document." Using Secure Print keeps printouts of confidential documents from being left unattended. Printing via Secure Print(P.
Printing Printing via Secure Print 2822-089 This section describes how to print a document from an application as a secured document. The first part of this section describes how to send a secured document to the machine, and the second part of this section describes how to print the secured document on the machine. Sending a Secured Document from a Computer to the Machine(P. 169) Printing Out Secured Documents(P. 170) Changing the Valid Time Period for Secured Documents(P.
Printing Printing Out Secured Documents Prints secured documents sent to the machine. After a valid time period ( Changing the Valid Time Period for Secured Documents(P. 170) ) has elapsed, the secured document will be deleted from the memory of the machine and can no longer be printed. ● If secured documents are left unprinted, they occupy the memory and may prevent the machine from printing even ordinary (not secured) documents. Make sure that you print your secured documents as soon as you can.
Printing 2 Select . 3 Select . ● If the login screen appears, enter the correct ID and PIN. 4 Logging in to the Machine(P. 120) Select . When cannot be selected ● Set
Printing When cannot be selected ● Set
Printing Printing from a USB Memory Device (Memory Media Print) 2822-08A You can print files directly by connecting a USB memory device to the machine. Using this function, you can print without using a computer. For more information about the available USB memory devices and how to insert/remove the USB memory device, see Using a USB Memory Device(P. 156) . ● It is necessary to set
Printing ● You can specify the file display method used to display the screen. Display Settings>(P. 369) or as the default setting for the file sort order. (P. 369) 1 Select . 2 Select the criteria for file sorting.
Printing Uses the paper that is loaded in the paper drawer (Drawer 1) of the machine to print files. ● When the optional cassette feeding module is installed, its paper drawer is also displayed. ● When specifying other print settings, select . ● is not available for printing PDF files. You can adjust the brightness of images. ● When specifying other print settings, select . Enter the number of copies.
Printing Prints on both sides of paper in such a way that the printed pages are opened vertically when bound. ● <2-Sided Printing> may not be available with some sizes or types of paper. Available Paper(P. 478) ● is not available for printing TIFF files. You can select an "N on 1" pattern to print multiple pages of image data on one side of a sheet of paper. Does not apply N on 1. Prints two pages of image data on one side of a sheet of paper.
Printing <2-Sided Printing> You can make 2-sided printouts. Select the binding position. (JPEG files only) Prints data for multiple pages of image data on the same side of a sheet of paper. You can specify the number of pages to print on one side of a sheet of paper. For example, to print four pages on one side of a sheet of paper, select <4 on 1>. You can select the type of original depending on the image to print.
Printing Adjusts the density for printing. Selecting prints in toner saving mode. Select when you want to check the layout or other appearance characteristics before proceeding to final printing of a large job. ● When is set to , is not available. You can change the print settings for PDFs. <2-Sided Printing> You can make 2-sided printouts. Select the binding position.
Printing ● When the specified page range does not match any of the pages of the PDF file, printing is not performed. Specify whether to enlarge or reduce the original according to the print range of paper. Note that size enlargement/reduction will not affect the aspect ratio of the original. Specify whether to extend the print range to the paper size.
Printing Selecting prints in toner saving mode. Select when you want to check the layout or other appearance characteristics before proceeding to final printing of a large job. See (P. 341) for the description of the setting. Enable or disable the smoothing mode in which the edges of characters and graphics are smoothly printed. See (P. 341) for the description of the setting. Specify the resolution to process print data.
Printing Receiving I-Faxes for Printing 2822-03E Internet Fax (I-Fax) is a function that attaches a file to an e-mail as a TIFF image file and transfers it. This machine can receive I-Faxes and print them. I-Faxes can be received automatically at the specified intervals, and also received manually. Configuring the I-Fax RX Settings(P. 181) Receiving I-Faxes Manually(P.
Printing [POP Server] Enter alphanumeric characters as the POP3 server name or IP address for receiving I-Faxes. [User Name] Enter alphanumeric characters as the user name for the specified e-mail account. [Set/Change Password] To set or change the password, select the check box and enter alphanumeric characters in [Password]. [POP RX] Select the check box to receive I-Faxes. [POP Interval] This sets the interval (in minutes) used for automatically connecting to the POP3 server.
Printing Specifying the paper size (P. 366) ● Depending on the network you are using, you may need to change the POP3 port setting ( Changing Port Numbers(P. 229) ). For more information, contact your Internet service provider or Network Administrator. Receiving I-Faxes Manually If the I-Fax RX setting is completely configured from the POP3 server, you can manually receive I-Faxes and print them.
Linking with Mobile Devices Linking with Mobile Devices Linking with Mobile Devices .................................................................................................................... 185 Connecting with Mobile Devices ...................................................................................................................... 186 Connecting via a Wireless LAN Router (LAN Connection) ..............................................................................
Linking with Mobile Devices Linking with Mobile Devices 2822-03F Linking the machine with mobile devices such as smart phones and tablets enables you to use an appropriate application to perform printing, or other operation with ease. In addition, you can operate the machine from mobile devices via remote control to confirm printing status and change the settings of the machine. Connecting with Mobile Devices(P. 186) Connecting Directly (Access Point Mode)(P.
Linking with Mobile Devices Connecting with Mobile Devices 2822-03H There are two methods used to connect a mobile device with the machine: connecting via a wireless LAN router, and communicating wirelessly and directly with the machine. Select a connection method in accordance with the communication environment and the device you are using. Perform communication with mobile devices from ( Home Screen(P. 104) ).
Linking with Mobile Devices Connecting via a Wireless LAN Router (LAN Connection) 2822-03J If a wireless LAN router is connected to the network connected to the machine, you can establish a communication with a mobile device via the wireless LAN router in the same way for a computer. For information about how to connect a mobile device to your wireless LAN router, see the instruction manuals for your networking devices or contact your manufacturer.
Linking with Mobile Devices 3 4 Launch Canon PRINT Business on the mobile device. Utilizing the Machine through Applications(P. 193) Read the QR code displayed on the screen using the mobile device. Connecting via a Wireless LAN Router (Black and White LCD Model) 1 Select in the Home screen. 2 Select . 3 Connect from the mobile device to the IP address that appears on the screen. 188 Home Screen(P.
Linking with Mobile Devices Connecting Directly (Access Point Mode) 2822-03K 1660-068 Even in an environment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without difficult settings. Preparing for Direct Connection (Access Point Mode)(P. 189) Connecting Directly (Touch Panel Model)(P. 190) Connecting Directly (Black and White LCD Model)(P.
Linking with Mobile Devices Canon PRINT Business ● For information about the operating systems compatible with Canon PRINT Business, the detailed setting procedure, and the operating procedure, please see the application's Help or the Canon website (http:// www.canon.com/gomp/). Connecting Directly (Touch Panel Model) ● It may take time until a connection of the machine and the mobile device is established. ◼ Connecting Manually 1 Select in the Home screen. Home Screen(P.
Linking with Mobile Devices 6 When the target operation is completed, then select . ● Select on the screen to check the connected mobile device. ● While connecting via direct connection, you may not be able to connect to the Internet depending on the mobile device you are using. ● If a wireless connection from the mobile device is not performed within 5 minutes while the SSID and network key are displayed, the connection waiting state terminates.
Linking with Mobile Devices 3 Select . 4 Configure the Wi-Fi settings from the mobile device using the SSID and network key 5 information that appear on the display. When the target operation is completed, press , then select . ● Select on the screen under the direct connection to check the connected mobile device.
Linking with Mobile Devices Utilizing the Machine through Applications 2822-03L Perform printing and other operations from the mobile device connected to the machine using applications. Various applications including those exclusive to Canon are supported. Use properly in accordance with your device, the application, and the situation. ◼ Using Canon PRINT Business This application is used to perform printing and other operations from mobile devices that support iOS/Android.
Linking with Mobile Devices Using AirPrint 2822-03R This section describes the settings required to use AirPrint and the procedures to be performed using Apple devices. AirPrint Settings Configuring AirPrint Settings(P. 194) Displaying the Screen for AirPrint(P. 196) Functions of the AirPrint Printing with AirPrint(P. 199) Troubleshooting If AirPrint Cannot Be Used(P.
Linking with Mobile Devices [Use AirPrint] Select the check box to enable AirPrint. To disable AirPrint, clear the check box. [Printer Name] Enter the name of the machine. If an mDNS name has already been registered in [mDNS Settings] ( Configuring DNS(P. 65) ), the registered name is displayed. [Location] Enter the location of the machine.
Linking with Mobile Devices Changing Print Settings To perform printing with AirPrint, IPP protocol is used. Turning the Function On/Off You can specify whether to perform printing with AirPrint. The factory default setting is .
Linking with Mobile Devices 2 Select this machine from the list of printers in [Printers & Scanners]. 3 Click [Options & Supplies]. 4 Click [Show Printer Webpage]. 5 Log in to the Remote UI. ● To change the AirPrint settings, it is necessary to log in as an administrator. ◼ AirPrint-Dedicated Page When you log in with administrator privileges, the AirPrint-dedicated page is displayed as shown below.
Linking with Mobile Devices [Consumables Information] Enables you to check the information of each paper source and consumables of the machine and the device version. Trademarks Apple, Bonjour, iPad, iPhone, iPod touch, Mac, macOS, OS X and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc.
Linking with Mobile Devices Printing with AirPrint 2822-03S You can print from an iPad, iPhone, iPod touch, or Mac without using a printer driver. Printing from an iPad, iPhone, or iPod touch(P. 199) Printing from a Mac(P. 200) System Requirements One of the following Apple devices is required to print with AirPrint. ● iPad (all models) ● iPhone (3GS or later) ● iPod touch (3rd generation or later) ● Mac (Mac OS X 10.7 or later)* *OS X v10.
Linking with Mobile Devices 3 Tap [Print]. 4 Select this machine from [Printer]. ● The printers connected to the network are displayed here. Select this machine in this step. ● The screen for selecting this machine in [Printer] is not displayed on applications that do not support AirPrint. You cannot print by using those applications. 5 Specify the print settings as necessary. ● The available settings and paper sizes differ depending on the application you are using. 6 Tap [Print].
Linking with Mobile Devices ● The available settings and paper sizes differ depending on the application you are using. 6 Click [Print]. ➠ Printing starts.
Linking with Mobile Devices If AirPrint Cannot Be Used 2822-03U If AirPrint cannot be used, try taking the following solutions. ● Make sure that the machine is turned ON. If the machine is turned ON, first turn it OFF, then wait for at least 10 seconds and then turn it back ON to check if the problem is solved. ● Make sure that no error messages are displayed on the machine. ● Make sure that Apple devices and the machine are connected to the same LAN.
Linking with Mobile Devices Using Google Cloud Print 2822-03W Google Cloud Print is a service that enables a user with a Google account to print from a smartphone, tablet, or computer connected to the Internet using applications compatible with Google Cloud Print. Unlike conventional printing from a computer, it does not require a printer driver. Checking the Settings of the Machine(P. 203) Registering the Machine with Google Cloud Print(P.
Linking with Mobile Devices ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) . 1 Start the Remote UI and log in as an administrator. 2 Click [Settings/Registration] on the Portal page. 3 Select [Network Settings] 4 Click [Edit] for [Basic Settings]. 5 Select the [Use Google Cloud Print] check box 6 Click [Register] in [Registration Status]. Starting Remote UI(P.
Linking with Mobile Devices Managing the Machine by the Remote Control 2822-03X You can use the Remote UI from a smart phone or tablet Web browser. You can confirm the machine status or perform various settings from a mobile device. Note that the Remote UI screen may not be displayed properly for some devices and environments. Starting the Remote UI from Mobile Devices Enter the IP address of the machine on the Web browser to start the Remote UI.
Managing the Machine Managing the Machine Managing the Machine ............................................................................................................................... 207 Setting Access Privileges .................................................................................................................................. 209 Setting the System Manager ID and PIN ......................................................................................................
Managing the Machine Managing the Machine 2822-03Y To reduce the various risks associated with the use of this machine, such as leaks of personal information or unauthorized use by third parties, constant and effective security measures are required. An administrator should manage important settings, such as access privileges and security settings, to ensure that the machine is used safely. ◼ Configuring the Basic Management System Setting Access Privileges(P.
Managing the Machine ◼ Managing the System Configuration and Settings Updating the Firmware(P. 280) Initializing Settings(P.
Managing the Machine Setting Access Privileges 2822-040 Protect the machine from unauthorized access by only allowing users with access privileges to use the machine. Access privileges are set separately for system administrators, general users, and the Remote UI. When privileges are set, the user must enter an ID and PIN to print or change settings. Set up an account with full access privileges called "System Manager ID" for a system manager.
Managing the Machine Setting the System Manager ID and PIN 2822-041 Set the system manager account, "System Manager ID." You can also set a PIN for the System Manager ID. If the System Manager ID is specified, you can access items that require administrator privileges, for example, and , only when the System Manager ID and PIN have been entered correctly.
Managing the Machine ● Do not forget your PIN. If you forget your PIN, contact your local authorized Canon dealer or the Canon help line. Configuring settings via the Remote UI ● Start the Remote UI and log in to System Manager Mode. Click [Settings/Registration] [System Manager Information] [User Management] [Edit] and specify the necessary settings on the displayed screen.
Managing the Machine Setting the Department ID Management 2822-042 You can control access to the machine by using multiple IDs for multiple users or groups. If a user tries to operate the machine when Department ID Management is enabled, a login screen is displayed, and the user must enter their own Department ID and PIN to use the machine. When Department ID Management is enabled, usage of functions, such as printing, is recorded for each Department ID.
Managing the Machine [Department ID] Enter the Department ID number to be registered. [Set PIN] To set a PIN, select the check box and enter the same number both in the [PIN] and [Confirm] text boxes. [Restrict Functions] You can restrict the number of pages to print for departments to be registered. To restrict the number of pages to print, select the check box for the target type, and enter the appropriate number of pages in [Number of Pages]. 3 Click [OK].
Managing the Machine Enabling the Department ID Management After you register as many Department IDs as necessary, enable Department ID Management. 1 Start the Remote UI and log in to System Manager Mode. Starting Remote UI(P. 260) 2 Click [Settings/Registration] on the Portal page. 3 Select [User Management] 4 Click [Edit]. 5 Select the [Department ID Management] check box. Remote UI Screen(P. 261) [Department ID Management].
Managing the Machine Enabling the Department ID Management for Jobs from a Computer When you want to enable Department ID Management for jobs from a computer, you need to specify the department ID and PIN using the driver pre-installed on each computer. ● To perform the following procedure, log in to your computer with an administrator account. 1 Open the printer folder. 2 Right-click the driver icon for this machine, and click [Printer properties] or 3 Click the [Device Settings] tab.
Managing the Machine 7 Click [OK]. Logging in to the machine ● When you try to send job from a computer when Department ID Management is enabled, the following pop-up screen is displayed (unless the [Confirm Department ID/PIN When Printing] check box is cleared): Blocking Jobs When Department ID Is Unknown "Printing from computer" is configured by default so that the user can execute jobs without entering an ID and PIN even while Department ID Management is enabled.
Managing the Machine entered. When you want to configure a setting so that no jobs are executed unless the correct department ID and PIN are entered, clear the check box. 6 Click [OK]. LINKS Setting Access Privileges(P. 209) Setting the System Manager ID and PIN(P.
Managing the Machine Setting a Remote UI PIN 2822-043 You can set a PIN for access to the Remote UI. All users use a common PIN. ● When Department ID Management is enabled, setting here is not required. Management(P. 212) Setting the Department ID ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) . 1 Start the Remote UI and log in to System Manager Mode. Starting Remote UI(P.
Managing the Machine Using the operation panel ● Remote UI Access PIN settings can also be accessed from
Managing the Machine Configuring the Network Security Settings 2822-044 Authorized users may incur unanticipated losses from attacks by malicious third parties, such as sniffing, spoofing, and tampering of data as it flows over a network. To protect your important and valuable information from these attacks, the machine supports the following features to enhance security and secrecy.
Managing the Machine IPSec Communication While TLS only encrypts data used on a specific application, such as a Web browser or an e-mail application, IPSec encrypts the whole (or payloads of) IP packets. This enables IPSec to offer a more versatile security system than TLS. Configuring IPSec Settings(P. 243) IEEE 802.1X Authentication IEEE 802.1X is a standard and mechanism for blocking unauthorized access to the network by collectively managing user authentication information.
Managing the Machine Restricting Communication by Using Firewalls 2822-045 Without proper security, unauthorized third parties can access computers and other communication devices that are connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that restricts communication to devices with specified IP addresses or MAC addresses. Specifying IP Addresses for Firewall Settings(P. 223) Specifying MAC Addresses for Firewall Settings(P.
Managing the Machine Specifying IP Addresses for Firewall Settings 2822-046 You can either limit communication to only devices with specified IP addresses, or block devices with specified IP addresses but permit other communications. You can specify a single IP address or a range of IP addresses. ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) .
Managing the Machine Select the check box to restrict communication. Clear the check box to disable the restriction. [Default Policy] Select the precondition to allow or reject the communication of other devices with the machine. [Reject] Select to pass communication packets only when they are sent to or received from devices whose IP addresses are entered in [Exception Addresses]. Communications with other devices are prohibited.
Managing the Machine 3 6 Click [OK]. Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Using the operation panel ● You can also enable or disable IP address filtering from
Managing the Machine Specifying MAC Addresses for Firewall Settings 2822-047 You can limit communication to only devices with specified MAC addresses, or block devices with specified MAC addresses but permit other communications. This function is unavailable when the machine is connected to a wireless LAN. ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) .
Managing the Machine 1 Select the [Use Filter] check box and click the [Reject] or [Allow] radio button for the [Default Policy]. [Use Filter] Select the check box to restrict communication. Clear the check box to disable the restriction. [Default Policy] Select the precondition to allow or reject other devices to communicate with the machine. [Reject] Select to pass communication packets only when they are sent to or received from devices whose MAC addresses are entered in [Exception Addresses].
Managing the Machine 3 6 Click [OK]. Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Using the operation panel ● You can also enable or disable MAC address filtering from
Managing the Machine Changing Port Numbers 2822-048 Ports serve as endpoints for communicating with other devices. Typically, conventional port numbers are used for major protocols, but devices that use these port numbers are vulnerable to attacks because these port numbers are well-known. To enhance security, your Network Administrator may change the port numbers. When a port number has been changed, the new number must be shared with the communicating devices, such as computers and servers.
Managing the Machine Setting a Proxy 2822-049 A proxy (or HTTP proxy server) refers to a computer or software that carries out HTTP communication for other devices, especially when communicating with resources outside the network, such as when browsing Web sites. The client devices connect to the outside network through the proxy server, and do not communicate directly to the resources outside.
Managing the Machine Enter the address of the proxy server. Specify the IP address or host name depending on the environment. [HTTP Proxy Server Port Number] Change the port number as necessary. [Use Proxy within Same Domain] Select the check box to also use the specified proxy server for communication with devices in the same domain. [Use Proxy Authentication] To enable authentication by the proxy server, select the check box and enter alphanumeric characters for the user name in the [User Name] text box.
Managing the Machine Configuring the Key and Certificate for TLS 2822-04A You can encrypt communication between the machine and a Web browser on the computer by using Transport Layer Security (TLS). TLS is a mechanism for encrypting data sent or received over the network. TLS must be enabled when the Remote UI is used for specifying settings for IPSec (Pre-Shared Key Method), IEEE 802.1X authentication (TTLS/ PEAP), or SNMPv3.
Managing the Machine 7 Click [Edit]. 8 Select the [Use TLS] check box and click [OK]. 9 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Using the operation panel ● You can also enable or disable TLS encrypted communication from
Managing the Machine Configuring IPSec Settings(P. 243) Configuring IEEE 802.1X Authentication Settings(P. 250) Monitoring and Controlling the Machine with SNMP(P.
Managing the Machine Generating the Key and Certificate for Network Communication 2822-04C A key and certificate can be generated with the machine when it is required for encrypted communication via Transport Layer Security (TLS). You can use TLS when accessing the machine via the Remote UI. Self-signed certificates are used with the key and certificate generated in "Network Communication.
Managing the Machine [Key Settings] [Key Name] Enter alphanumeric characters for naming the key. Set a name that will be easy for you to find later in a list. [Signature Algorithm] Select the signature algorithm from the drop-down list. [Key Algorithm] Select the key generation algorithm from [RSA] or [ECDSA], then select the key length from the dropdown list. In either case, the larger the number for the key length is, the higher the security level becomes. However, the communication speed becomes slower.
Managing the Machine 7 Click [OK]. ● Generating a key and certificate may take some time. ● After the key and certificate is generated, it is automatically registered to the machine. LINKS Registering the Key and Certificate for Network Communication(P. 241) Configuring the Key and Certificate for TLS(P. 232) Configuring IPSec Settings(P.
Managing the Machine Generating a Key and Certificate Signing Request (CSR) 2822-04E Because certificates generated on the machine do not have a CA signature, a communication error may result depending on devices it communicates with. To have the certificate authority issue the certificate with the CA signature, you need to obtain data of CSR (Certificate Signing Request), which the administrator can generate from Remote UI. When the certificate is issued, register it in the key with the CSR generated.
Managing the Machine [Key Settings] [Key Name] Enter alphanumeric characters for naming the key. Set a name that will be easy for you to find later in a list. [Signature Algorithm] Select the signature algorithm from the drop-down list. [Key Algorithm] Select the key generation algorithm from [RSA] or [ECDSA], then select the key length from the dropdown list. In any case, the larger the number for the key length, the slower the communication. However, the security is tighter.
Managing the Machine ● A dialog box for storing the file appears. Choose where to store the file and click [Save]. ➠ The CSR file is stored on the computer. 9 Attach the stored file and submit the application to the certification authority. Registering a Certificate to a Key The key with the CSR generated cannot be used until the certificate issued from the certificate authority based on the CSR is registered in the key.
Managing the Machine Registering the Key and Certificate for Network Communication 2822-04F You can obtain the key and certificate, and the CA certificate from a certification authority (CA) for use with the machine. Install and register the obtained key and certificate file and CA certificate file in this machine using Remote UI. Check the key and certificate, and CA certificate conditions that are required for the machine in advance ( Management Functions(P. 484) ).
Managing the Machine Deleting the key and certificate file or CA certificate file ● Click [Delete] on the right of the file you want to delete 6 click [OK]. Click [Browse], specify the file to install, and click [Start Installation]. ➠ The key and certificate file or the CA certificate file is installed on the machine from a computer. 7 Register the key and certificate or CA certificate.
Managing the Machine Configuring IPSec Settings 2822-04H Internet Protocol Security (IPSec or IPsec) is a protocol suite for encrypting data transported over a network, including Internet networks. While TLS only encrypts data used on a specific application, such as a Web browser or an e-mail application, IPSec encrypts either whole IP packets or the payloads of IP packets, offering a more versatile security system.
Managing the Machine ● For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI(P. 269) . 1 Start the Remote UI and log in to System Manager Mode. Starting Remote UI(P. 260) 2 Click [Settings/Registration] on the Portal page. 3 Select [Network Settings] 4 Click [Edit]. 5 Select the [Use IPSec] check box and click [OK]. Remote UI Screen(P. 261) [IPSec Settings].
Managing the Machine [Local Address] Click the radio button for the type of IP address of the machine to apply the policy. [All IP Addresses] Select to use IPSec for all IP packets. [IPv4 Address] Select to use IPSec for all IP packets that are sent to or from the IPv4 address of the machine. [IPv6 Address] Select to use IPSec for all IP packets that are sent to or from an IPv6 address of the machine.
Managing the Machine Description Entering a single address IPv4: Delimit numbers with periods. Example 192.168.0.10 IPv6: fe80::10 Delimit alphanumeric characters with colons. Specifying a range of addresses Insert a hyphen between the addresses. 192.168.0.10-192.168.0.20 [Subnet Settings] When manually specifying IPv4 address, you can express the range by using the subnet mask. Enter the subnet mask using periods to delimit numbers (example:"255.255.255.240").
Managing the Machine [Authentication]/[Encryption]/[DH Group] Select an algorithm from the drop-down list. Each algorithm is used in the key exchange. [Authentication] Select the hash algorithm. [Encryption] Select the encryption algorithm. [DH Group] Select the Diffie-Hellman group, which determines the key strength. Authenticating a machine using a pre-shared key 1 Click the [Pre-Shared Key Method] radio button for [Authentication Method] and then click [Shared Key Settings].
Managing the Machine [Specify by Time] Enter a time in minutes to specify how long a session lasts. [Specify by Size] Enter a size in megabytes to specify how much data can be transported in a session. [Select Algorithm] Select the [ESP], [ESP (AES-GCM)], or [AH (SHA1)] check box(es) depending on the IPSec header and the algorithm used. AES-GCM is an algorithm for both authentication and encryption.
Managing the Machine Using the operation panel ● You can also enable or disable IPSec communication from
Managing the Machine Configuring IEEE 802.1X Authentication Settings 2822-04J The machine can connect to an 802.1X network as a client device. A typical 802.1X network consists of a RADIUS server (authentication server), LAN switch (authenticator), and client devices with authentication software (supplicants). If a device tries to connect to the 802.1X network, the device must go through user authentication in order to prove that the connection is made by an authorized user.
Managing the Machine 2 Click [Settings/Registration] on the Portal page. 3 Select [Network Settings] 4 Click [Edit]. 5 Select the [Use IEEE 802.1X] check box, and enter the login name in the [Login Name] Remote UI Screen(P. 261) [IEEE 802.1X Settings]. text box. [Use IEEE 802.1X] Select the check box to enable IEEE 802.1X authentication. [Login Name] Enter alphanumeric characters for a name (EAP identity) that is used for identifying the user.
Managing the Machine Setting TTLS/PEAP 1 Select the [Use TTLS] or [Use PEAP] check box. Internal protocol for TTLS ● You can select MSCHAPv2 or PAP. 2 Click [Change User Name/Password]. ● To specify a user name other than the login name, clear the [Use Login Name as User Name] check box. Select the check box if you want to use the login name as the user name. 3 Set the user name/password. [User Name] Enter alphanumeric characters for the user name.
Managing the Machine Using the operation panel ● You can also enable or disable IEEE 802.1X authentication from
Managing the Machine Restricting the Machine's Functions 2822-04K Some of the functions of the machine may rarely be used or provide opportunities for misuse. For security purposes, the machine can be set to limit its capabilities by partially or completely disabling these functions. Restricting Printing from a Computer You can limit "printing from computer" only to secure documents so that no print jobs can be executed unless the PIN is entered on the machine side. Restricting Printing from a Computer(P.
Managing the Machine Restricting Printing from a Computer 2822-04L You can drastically reduce information leakage risks by limiting the documents printable from a computer to the Secure Print documents ( Printing a Document Secured by a PIN (Secure Print)(P. 168) ).
Managing the Machine Restricting USB Functions 2822-04R USB is a convenient way of connecting peripheral devices and storing or relocating data, but USB can also be a source of information leakage if it is not properly managed. Be especially careful when handling USB memory devices. This section describes how to restrict connection via the USB port of the machine and how to prohibit use of USB memory devices. Restricting the USB Connection with a Computer(P. 256) Restricting the USB Print Function(P.
Managing the Machine Disabling HTTP Communication 2822-04S HTTP is used for communications over the network, such as when you access the machine via the Remote UI. If you are using a USB connection or are otherwise not using HTTP, you can disable HTTP to block malicious third-party intrusions via the unused HTTP port. ● Disabling HTTP disables some of the network capabilities, such as the Remote UI, WSD printing, and printing with Google Cloud Print.
Managing the Machine Disabling Remote UI 2822-04U The Remote UI is useful because the machine settings can be specified by using a Web browser on a computer. To use the Remote UI, the machine must be connected to a computer over the network. If the machine is connected to a computer via USB, or if you do not need to use the Remote UI, you might want to disable the Remote UI to reduce the risk of having your machine controlled remotely over the network by malicious third parties.
Managing the Machine Managing the Machine from a Computer (Remote UI) 2822-04W Using a Web browser to operate the machine remotely, you can check the documents waiting to be printed or the status of the machine. You can also make various settings. You can do this without leaving your desk, making system management easier. For more information about the system requirements for the Remote UI, see System Environment(P. 486) . Functions of the Remote UI Checking the Status and Logs(P.
Managing the Machine Starting Remote UI 2822-04X To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI. Check the IP address set to the machine in advance ( Viewing Network Settings(P. 47) ). If you have any questions, ask your Network Administrator. 1 Start the Web browser. 2 Enter "http:///" in the address field, and press the [ENTER] key.
Managing the Machine If [Remote UI Access PIN] is set, enter the PIN. Setting a Remote UI PIN(P. 218) When the Department ID Management is enabled Enter the appropriate ID in [Department ID] and PIN in [PIN]. Management(P. 212) 4 Setting the Department ID Click [Log In]. ➠ The Portal page (main page) will be displayed. Remote UI Screen(P. 261) Remote UI Screen When you log in to the Remote UI, the following Portal page appears.
Managing the Machine Refresh Icon Refreshes the currently displayed page. [Language] Selects the display language used for the Remote UI screens. [Log Out] Logs off from the Remote UI. The Login page will be displayed. [Mail to System Manager] Displays a window for creating an e-mail to the system manager specified in [System Manager Information] under [User Management]. [Status Monitor/Cancel] Displays the [Status Monitor/Cancel] page.
Managing the Machine Checking the Status and Logs 2822-04Y Checking Current Status of Print Documents(P. 263) Checking Current Status of Received Documents(P. 264) Checking History of Documents(P. 264) Checking Error Information(P. 264) Checking Consumables(P. 265) Checking Device Specifications(P. 265) Checking System Manager Information(P. 266) Checking Print Total Counter(P. 266) Checking History of Toner Cartridges(P. 267) Checking Usage Status of the Machine(P.
Managing the Machine ● Click [Job Number] on the paused documents and secure documents to display detailed information. You can check the user name and the page count of the printed document. Checking Current Status of Received Documents You can check the logs of received I-Fax documents. Log in to the Remote UI ( in [RX] Starting Remote UI(P.
Managing the Machine Checking Consumables Paper size and paper type for the paper source, toner cartridge model number, etc. are displayed. You can also click [Check Consumables Details] in the Portal page (main page) to display this page ( Remote UI Screen(P. 261) ). Log in to the Remote UI ( [Consumables] Starting Remote UI(P. 260) ) [Status Monitor/Cancel] Checking Device Specifications The maximum print speed and machine features are displayed.
Managing the Machine Checking System Manager Information Information about the machine and the system manager is displayed. The device name and other system manager information displayed here correspond to the settings in [System Manager Information] on the [User Management] page or in [Device Information Settings] on the [Device Management] page. Log in to the Remote UI ( Information] Starting Remote UI(P.
Managing the Machine Checking History of Toner Cartridges You can check the usage logs of toner cartridges and other logs. Log in to the Remote UI ( Log] Starting Remote UI(P. 260) ) [Status Monitor/Cancel] [Cartridge Checking Usage Status of the Machine The monthly total volume of printouts and monthly total power consumption are displayed. You can display the Eco Information screen and change the settings to save paper and power consumption.
Managing the Machine LINKS Remote UI Screen(P.
Managing the Machine Setting Up Menu Options from Remote UI 2822-050 You can change the various machine settings by using the Remote UI. Most of the settings can be set also on the machine, but some settings can only be set using the Remote UI. This section describes the basic flow of changing the settings of the machine using the Remote UI. ● Some settings can only be changed when you have logged in to System Manager Mode.
Managing the Machine 5 Click [Edit]. 6 Specify the required settings. 7 Click [OK]. 8 Restart the machine as necessary. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Managing the Machine ● For information about whether you need to restart the machine, view the message on the edit screen.
Managing the Machine Security Policy 2822-08F It is a common practice for organizations to adopt a security policy that defines basic information security objectives and standards, which requires information devices such as computers and printers to be operated accordingly. If you have a security policy to be applied in your organization, apply it to this machine as well. Viewing the Security Policy(P. 272) Security Policy Items(P. 272) To Apply the Security Policy to the Machine(P.
Managing the Machine [Prohibit Use as USB Device]
Managing the Machine ●
Managing the Machine [Password Operational Policy] [Prohibit Caching of Password for External Servers] This function is not available on this machine, giving no change to the security level. [Display Warning When Default Password Is in Use] This function is not available on this machine, giving no change to the security level. [Prohibit Use of Default Password for Remote Access] This function is not available on this machine, giving no change to the security level.
Managing the Machine ◼ [Log] [Force Recording of Audit Log] This function is not available on this machine, giving no change to the security level. [Force SNTP Settings] This function is not available on this machine, giving no change to the security level. ◼ [Job] [Printing Policy] [Prohibit Immediate Printing of Received Jobs] This function is not available on this machine, giving no change to the security level.
Managing the Machine Importing/Exporting the Setting Data 2822-051 Machine settings data can be saved on your computer (export). Data that is saved on your computer can also be registered in the machine (import). Data exported from this machine can be imported to another machine of the same model. So you can easily copy a variety of settings data to multiple machines. To use these features, it is required that you have logged in to System Manager Mode. Exporting the Setting Data(P.
Managing the Machine [Encryption Password] Enter a password to encrypt the export data using alphanumeric characters. Enter the same password in [Confirm]. To export the data, you must set an encryption password. ● The password is required when exported data is imported. 5 6 Importing the Setting Data(P. 278) Click [Start Exporting]. Follow the on-screen instructions to specify the location where to save the exported data. ➠ The setting data will be saved.
Managing the Machine [File Path] Click [Browse] and select the file. You can only import a device configuration information file (*.dcm). [Decryption Password] Enter the password set when the settings were exported. 5 Click [Start Importing]. 6 Click [OK]. ➠ The selected settings data is loaded into the machine. 7 Click [OK]. ➠ If the [Settings/Registration] check box is selected in step 4, the machine automatically restarts.
Managing the Machine Updating the Firmware 2822-052 For the firmware, select the method of update depending on the installation condition of the machine.
Managing the Machine 3 Select . ➠ When the firmware update is complete, the machine restarts automatically. ● Do not turn OFF the machine while the restart is in progress. ◼ Black and White LCD Model 1 Select
Managing the Machine To Put the Machine into a Firmware Update Waiting State
Managing the Machine Initializing Settings 2822-053 You can restore the following settings: Initializing Menu(P. 283) Initializing Key and Certificate(P. 283) Initializing All Data/Settings(P. 284) Initializing Menu You can restore the settings of the machine ( Setting Menu List(P. 286) ). Depending on the settings selected, you may need to restart the machine after initialization.
Managing the Machine
Setting Menu List Setting Menu List Setting Menu List ........................................................................................................................................... 286 .................................................................................................................................................... 287 ...............................................................................................................................
Setting Menu List Setting Menu List 2822-054 You can customize the machine based on your environment and needs by configuring settings described in this chapter. To start configuration, select
Setting Menu List 2822-055 Asterisks (*) ● Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. Item (P. 288) Description This section describes the settings related to viewing of the display. (P. 292) This section describes the USB keyboard settings. (P. 293) This section describes the timer settings and energy settings. (P.
Setting Menu List 2822-056 All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger ( ). (P. 288) /
Setting Menu List <Ελληνικά> <Български> <Русский> <>العربية <日本語> <中文(繁體)> <中文(简体)> <한국어>
Setting Menu List
Setting Menu List Black and white LCD model
Setting Menu List 2822-057 Specify the layout of an USB keyboard if connected to the machine. The default setting is marked with a dagger ( ).
Setting Menu List 2822-058 All the settings related to the timer and energy are listed with descriptions. Default settings are marked with a dagger ( ). (P. 293) (P. 293) (P. 294)
Setting Menu List
Setting Menu List <24 Hour>
Setting Menu List Select whether to return the display to the default screen after the Auto Reset is performed. If is selected, the main screen of the function selected in is displayed ( (P. 288) ). If is selected, the display returns to the main screen of the function that was selected.
Setting Menu List Before setting ● When the setting is enabled, the machine may automatically shut down even if you are operating the machine from the Remote UI. A malfunction may occur, particularly if the machine shuts down while data is being imported. When you import data using the Remote UI, set to or <0> in advance.
Setting Menu List Black and white LCD model (0:00 to 23:59) 298
Setting Menu List 2822-059 All the settings related to the network are listed with descriptions. Default settings are marked with a dagger ( ).
Setting Menu List
Setting Menu List Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)(P. 189)
Setting Menu List Touch panel model
Setting Menu List
Setting Menu List You can check the link-local address that is automatically acquired. Enable or disable stateless addresses. Enable or disable the stateful address that is acquired via DHCPv6.
Setting Menu List
Setting Menu List / (Black and white LCD model) Specify settings for using the machine in an IPv4 network. Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address(P. 41)
Setting Menu List Specify settings for using DNS functions without DNS servers. Configuring DNS(P. 65) If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS(P.
Setting Menu List
Setting Menu List If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS(P. 65) Specify settings for Windows Internet Name Service (WINS), which provides a NetBIOS name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Configuring WINS(P.
Setting Menu List Enable or disable automatic browsing and acquiring information for the printer by using the WSD protocol. Configuring Printing Protocols and WSD Functions(P.
Setting Menu List
Setting Menu List Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects.
Setting Menu List
Setting Menu List
Setting Menu List ● When is set to , you cannot select <1000BASE-T>. Check the MAC address of the machine, which is a number unique to each communication device. the MAC Address for Wired LAN(P. 47) Viewing
Setting Menu List Touch panel model
Setting Menu List Touch panel model
Setting Menu List Touch panel model
Setting Menu List 2822-05A All the settings related to the USB are listed with descriptions. Default settings are marked with a dagger ( ). Specify whether to enable or disable use of the USB port or a USB memory device.
Setting Menu List 2822-05C All the settings related to accessibility, such as inverting the screen colors and message display time, are listed with descriptions. Default settings are marked with a dagger ( ). (P. 320) (P. 320) (P. 321) (P. 321) (P. 321) (P.
Setting Menu List * Adjust the contrast (the difference between the light and dark parts) of the display to suit the installation location of the machine. Seven Levels
Setting Menu List
Setting Menu List 2822-05E All the settings used to generate the confirmation sound of a key being pressed, the sound indicating completion of the printing process, and other sounds, are listed with descriptions. Default settings are marked with a dagger ( ). (P. 323) (P. 323) (P. 323) (P. 323) (P. 324) (P. 324) ● For information about the setting procedures, see Setting Sounds(P.
Setting Menu List Select whether a tone is generated when printing has been completed. Select whether to generate the notification tone when the machine enters or exits sleep mode.
Setting Menu List 2822-05F Item Description (P. 326) This section describes how to adjust image quality for printing. (P. 333) This section describes how to use the cleaning functions.
Setting Menu List 2822-05H All the settings related to image quality adjustment are listed with descriptions. Default settings are marked with a dagger ( ). (P. 326) (P. 326) (P. 326) (P. 327) Asterisks (*) ● Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. Adjust this if the printed text or thin lines are faded.
Setting Menu List -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.0 (mm) * -5.0 to 0.0 to + 5.0 (mm) -5.0 to 0.0 to + 5.
Setting Menu List Touch panel model
Setting Menu List ● If you set to , the print may be faded or the printing speed may be slower. If the printed paper curls, set this item to .
Setting Menu List Print density may be uneven when the machine is used in an environment with high humidity. In this case, setting this item to may solve the problem.
Setting Menu List ● If you set to , the printing speed may be slower. / If the printed images are faint due to moisture condensation when performing 2-sided printing, setting to other than may solve the problem.
Setting Menu List
Setting Menu List 2822-05J The cleaning functions are listed with descriptions. Default settings are marked with a dagger ( ). (P. 333) (P. 333) Clean the fixing assembly after a toner cartridge is replaced or if black streaks appear on printouts. Fixing Assembly(P.
Setting Menu List 2822-05K Asterisks (*) ● Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. Item Description (P. 335) This section describes settings common to each function. (P. 338) This section describes how to specify printer settings. (P. 365) This section describes how to specify settings for receiving I-Faxes. (P.
Setting Menu List 2822-05L All the items related to settings common to each function are listed with descriptions. Default settings are marked with a dagger ( ). Asterisks (*) ● Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. Configure paper feed settings.
Setting Menu List * Specify this setting when you print a document on paper with logos. In general use, to print on paper with logos, you need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing.
Setting Menu List To print on a specific side of paper, you do not need to flip over paper in the paper source whether 1- or 2sided printing is selected. ● If is set for a paper source that is loaded with paper you cannot use for 2-sided printing ( Available Paper(P. 478) ), is applied to the paper source instead. In this case, you need to load the paper in the same way as when is selected ( Loading Preprinted Paper(P. 133) ).
Setting Menu List 2822-05R All the settings related to the printer are listed with descriptions. Default settings are marked with a dagger ( ). (P. 338) (P. 363) Asterisks (*) ● Settings marked with "*1" may not be displayed depending on the model you are using, options, or other setting items. ● Settings marked with "*2" cannot be imported or exported.
Setting Menu List
Setting Menu List
Setting Menu List
Setting Menu List
Setting Menu List
Setting Menu List / Shifts the print position on the side of paper facing up. / Shifts the print position on the side of paper facing down. Entering the setting value For /, specify a value with a "+" sign to shift the print position in the left-to-right direction.
Setting Menu List *1 *1 *1
Setting Menu List When a document containing an even number of pages is ended with 1-sided printing ● When is selected, the last page that is blank or unprintable is processed using 1sided printing even if the document consists of the even number of pages. When you use paper that has been preprinted with a logo ● If is selected and the last page is processed using 1-sided printing, the page orientation or print side may differ from that of other pages.
Setting Menu List
Setting Menu List Type of image Select the object for which to change the setting. represents letters and characters, represents lines and figures, and represents photos and images. Setting value Produces a fine print with clear edges of text. It is suitable for printing characters and fine lines. Produces a sharp print with strong contrast of lightness and darkness. It is suitable for printing image data such as photo image data.
Setting Menu List
Setting Menu List 0.44 to 10.00 to 99.99 (cpi)
Setting Menu List LBP214dw / LBP212dw
Setting Menu List
Setting Menu List
Setting Menu List Type of image Select the object for which to change the setting. represents letters and characters, represents lines and figures, and represents photos and images. Setting value Produces a fine print with clear edges of text. It is suitable for printing characters and fine lines. Produces a sharp print with strong contrast of lightness and darkness. It is suitable for printing image data such as photo image data.
Setting Menu List <~> <"> <#> <$> <\> <{> <}> <|>
Setting Menu List Select a method used to reproduce halftones. This option can be specified for each image type in any one document.
Setting Menu List Specify the way of printing color data in black and white.
Setting Menu List Produces a sharp print with strong contrast of lightness and darkness. It is suitable for printing image data such as photo image data. Produces a print with smooth gradation or smooth edges. It is suitable for printing figures or graphs containing gradation areas. Produces a fine print with clear edges of text. It is suitable for printing characters and fine lines. *1 You can change settings for PDF files.
Setting Menu List
Setting Menu List Type of image Select the object for which to change the setting. represents letters and characters, represents lines and figures, and represents photos and images. Setting value Produces a print with smooth gradation or smooth edges. It is suitable for printing figures or graphs containing gradation areas. Produces a sharp print with strong contrast of lightness and darkness.
Setting Menu List *1 You can change settings for XPS files. You can select the printing method used to reproduce halftones (the intermediate range between the lighter and darker areas of an image) for optimal image quality. Select a method used to reproduce halftones. This option can be specified for each image type in any one document.
Setting Menu List Produces a sharp print with strong contrast of lightness and darkness. It is suitable for printing image data such as photo image data. Produces a fine print with clear edges of text. It is suitable for printing characters and fine lines. Specify the way of printing color data in black and white.
Setting Menu List Prints in black and white so that R, G, and B are uniformly converted to the same gray level by using only brightness as the reference. Specify whether to disable a blank page in print data from being output.
Setting Menu List *1 Select a page description language so that the machine is detected as a printer that is compatible with that language when it is connected to a computer via USB.
Setting Menu List 2822-05S All the settings related to receiving I-Faxes are listed with descriptions. Default Settings are marked with a dagger ( ). (P. 365) (P. 365) Specify operations that are to be performed when the amount remaining in the toner cartridges is running low. /
Setting Menu List Specify the paper size to be used for printing.
Setting Menu List 2822-05U All the settings related to printing stored files are listed with descriptions. Default settings are marked with a dagger ( ). (P. 367) (P. 370) Asterisks (*) ● Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. Configure the default settings for memory media print.
Setting Menu List <1200 dpi> <600 dpi> Five Levels <2 on 1> <4 on 1> < Set PDF Details> <2 on 1> <4 on 1> <6 on 1> <8 on 1> <9 on 1> <16 on 1>
Setting Menu List Select Preview/Details as the method for displaying files in a USB memory device.
Setting Menu List Select whether to display short or long text for file names that are stored in a USB memory device.
Setting Menu List 2822-05W Specify whether to enable or disable Secure Print ( with a dagger ( ). Printing via Secure Print(P. 169) ). Default settings are marked
Setting Menu List 2822-05X Item Description (P. 373) You can configure the settings for managing users of the machine. (P. 375) You can manage information about the hardware and operations, as well as various data required when using the machine functions. /(P. 378) available for the machine. (P.
Setting Menu List 2822-05Y All the settings related to user management of the machine are listed with descriptions. Default settings are marked with a dagger ( ). (P. 373) (P. 373) Specify the ID or PIN exclusively for Administrators who have access privileges to and . ID is and PIN is .
Setting Menu List Black and white LCD model ● Specify whether to enable the Department ID Management. Use the Remote UI to perform department ID registration or check the machine usage status by department ID.
Setting Menu List 2822-060 All the settings related to management of information for the hardware and operations, as well as about management of data required when using the machine functions are listed with descriptions. Default settings are marked with a dagger ( ). (P. 375)
Setting Menu List
Setting Menu List
Setting Menu List / 2822-061 All the settings related to the software and system options available for the machine as well as about Register License are listed with descriptions. Default settings are marked with a dagger ( ). (P. 378) (P. 378) (P. 379) Asterisks (*) ● Settings marked with "*1" cannot be imported or exported.
Setting Menu List Touch panel model
Setting Menu List 2822-062 The settings for utilizing the machine settings and for initializing data are listed with descriptions. Default settings are marked with a dagger ( ). (P. 380) /(P. 381) (P. 381) (P. 381) Asterisks (*) ● Settings marked with an asterisk (*) cannot be imported or exported.
Setting Menu List / Enable or disable the Product Extended Survey Program (a program for the machine usage survey). Touch panel model
Setting Menu List 2822-063 All the settings related to the authentication function and encryption are listed with descriptions. Default Settings are marked with a dagger ( ). (P. 382) (P. 383) You can reinforce the security of the authentication function. Configure the security functions for user authentication.
Setting Menu List Configure a setting for disabling a weak encryption or the key and certification using a weak encryption. / / Touch panel model
Maintenance Maintenance Maintenance ..................................................................................................................................................... 385 Regular Cleaning ............................................................................................................................................... 387 Cleaning the Exterior ....................................................................................................................................
Maintenance Maintenance 2822-064 This chapter describes upkeep of the machine, including how to clean the machine and adjustment of print quality. ◼ Basic Cleaning Regular Cleaning(P. 387) ◼ Replacing Consumables Replacing the Toner Cartridge(P. 390) Checking the Remaining Amount of Consumables(P. 394) Consumables(P.
Maintenance Relocating the Machine(P. 395) Adjusting Image Quality(P. 397) Viewing the Counter Value(P. 401) Printing Reports and Lists(P.
Maintenance Regular Cleaning 2822-065 Regularly clean the machine to prevent deterioration in printing quality and to ensure that you use it safely and easily. Where to Clean Exterior of the machine and ventilation slots Cleaning the Exterior(P. 388) Internal fixing assembly Cleaning the Fixing Assembly(P.
Maintenance Cleaning the Exterior 2822-066 Regularly wipe the exterior of the machine, especially around the ventilation slots, to keep the machine in good condition. 1 Turn OFF the machine, and unplug the power cord from the AC power outlet. ● When you turn OFF the machine, data that is waiting to be printed is deleted. 2 Clean the exterior of the machine and the ventilation slots. ● Use a soft, well-wrung-out cloth dampened with water or a mild detergent diluted with water.
Maintenance Cleaning the Fixing Assembly 2822-067 Dirt may adhere to the fixing assembly inside the machine and cause black streaks to appear on printouts. To clean the fixing assembly, perform the following procedure. Note that you cannot clean the fixing assembly when the machine has documents waiting to be printed. To clean the fixing assembly, you need plain A4 or Letter size paper. Set the paper in the paper drawer or multi-purpose tray before performing the following procedure. Loading Paper(P.
Maintenance Replacing the Toner Cartridge 2822-068 The machine displays a message when the amount remaining in the toner cartridge is low. Note that the print quality may suffer if you continue printing without resolving this issue. You can check the amount remaining in the toner cartridges on the display ( Checking the Remaining Amount of Consumables(P. 394) ). When a Message Appear(P. 390) When Printouts are Poor in Quality(P. 391) Procedure for Replacing the Toner Cartridge(P.
Maintenance When Printouts are Poor in Quality If your printouts begin to show any of the following features, one of your toner cartridges is consumed. Replace the nearly empty toner cartridge even if no message is displayed. Procedure for Replacing the Toner Cartridge(P.
Maintenance 3 4 5 Remove the replacement toner cartridge from the protective case. Shake the toner cartridge 5 or 6 times as shown below to evenly distribute the toner inside the cartridge. Install the toner cartridge. ● Fully push it in until it cannot go any further. 6 Close the front cover.
Maintenance LINKS Consumables(P.
Maintenance Checking the Remaining Amount of Consumables 2822-069 Use the procedure below to check the amount remaining in the toner cartridges. It is particularly important to check whether you need to have a new toner cartridge ready before starting a large print job.
Maintenance Relocating the Machine 2822-06A The machine is heavy. Make sure to follow the procedure below when moving the machine to avoid injury, and also make sure to read the safety precautions before you begin. Important Safety Instructions(P. 2) 1 Turn OFF the machine and computer. ● When you turn OFF the machine, data that is waiting to be printed is deleted. 2 Disconnect the cables and cord from the machine in numerical order as in the illustration below.
Maintenance ● Position yourself toward the front side of the machine and hold the lift handles, then lift up the machine. If you have attached the optional cassette feeding module, leave the cassette feeding module on the floor and move it after moving the main unit of the machine. 6 Carefully place the machine at the new installation site. ● For information about how to install the machine after relocating it, see "Getting Started." Their Contents(P.
Maintenance Adjusting Image Quality 2822-06C If the print results are not satisfactory such as low image quality, poor reproducibility, or skewed printouts, try the adjustments below. ◼ Density Adjustment When the print results are too dark or too light, you can adjust the density. Adjusting Print Density(P. 398) ◼ Adjust Print Position You can adjust the print position when the printed image is skewed or part of the image is outside the print range. Adjusting Print Position(P.
Maintenance Adjusting Print Density 2822-06F When the print results are too dark or too light, you can adjust the density. 1 Select
Maintenance Adjusting Print Position 2822-06H If a document is printed off-center or out of the printable range, adjust the print position. You can adjust the print position for each paper source. You can adjust the print position in the range -5.0 mm to +5.0 mm in increments of 0.1 mm. Checking the Direction and Distance to Adjust When you adjust the print position, specify the direction using "+" and "-" and the distance using "mm.
Maintenance 6 Set an adjustment value. 7 Press ( ). Adjusting the Print Position for All Print Jobs ● You can use in the setting menu of the operation panel to adjust the print position for all print jobs, irrespective of the paper source. The print position can be adjusted in 0.5 mm increments between -50.0 mm and +50.0 mm. (P.
Maintenance Viewing the Counter Value 2822-06J You can check the total number of pages printed by the machine. The number of printouts includes printouts of the memory media print and the list as well as printouts of data from computers. Touch Panel Model Check the number of pages printed <101: Total 1> Displays the total number of pages printed. <113: Total (Black & White/Small)> Displays the total number of pages printed in black and white.
Maintenance Printing Reports and Lists 2822-06K You can print reports and lists to check information such as the total volume of printouts for each and machine settings. Configuring the Print Settings for Reports and Lists(P. 402) Printing a Report on the Total Volume of Printouts by Department ID(P. 402) Printing Lists of Settings(P. 403) Printing Reports and Lists on the Usage Status of the Machine(P.
Maintenance
Maintenance
Maintenance PCL Font List You can check the list of fonts available in PCL mode with a report.
Maintenance Consumables 2822-06L The following is a guide to the estimated replacement time for the consumables used in this machine. Purchase consumables at your local authorized Canon dealer. Observe safety and health precautions when storing and handling consumables. For optimum print quality, using Canon genuine Toner, Cartridge and Parts is recommended. ● To handle and store consumables, observe precautions in "Getting Started" provided for this product.
Maintenance Be careful of counterfeit toner cartridges ● Please be aware that there are counterfeit Canon toner cartridges in the marketplace. Use of counterfeit toner cartridge may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner cartridge. For more information, see global.canon/ctc. ● When replacing toner cartridges, see Replacing the Toner Cartridge(P. 390) .
Troubleshooting Troubleshooting Troubleshooting ............................................................................................................................................. 409 Common Problems ............................................................................................................................................ 411 Installation/Settings Problems .....................................................................................................................
Troubleshooting Troubleshooting 2822-06R 1660-0AE When a problem occurs, check this chapter to find out solutions before contacting Canon. ◼ Common Problems This section describes how to take action when you suspect that the machine is malfunctioning. Problems(P. 411) Common ◼ When You Cannot Print Properly This section describes how to take action when printing results are not satisfactory or the paper creases or curls. When You Cannot Print Properly(P.
Troubleshooting ◼ When a Problem Cannot Be Solved If a problem persists, see When a Problem Cannot Be Solved(P. 464) to find out where to contact.
Troubleshooting Common Problems 2822-06S If you encounter problems when using the machine, check the items in this section before contacting us. If the problems persist, contact your local authorized Canon dealer or the Canon help line. Check the Following Is the machine turned ON? Is the power cord connected? ● If the machine is turned ON but does not respond, turn it OFF, check whether the power cord is connected correctly, and turn it back ON.
Troubleshooting Installation/Settings Problems 2822-06U See Common Problems(P. 411) also. Problems with the Wireless/Wired LAN Connection(P. 412) Problem with the USB Connection(P. 415) Problem with the Print Server(P. 415) Problems with the Wireless/Wired LAN Connection The wireless LAN and wired LAN cannot be connected at the same time. ● The wireless LAN and wired LAN cannot be connected at the same time.
Troubleshooting You are unsure of the set IP address. Viewing Network Settings(P. 47) The connection method cannot be switched between a wired LAN and a wireless LAN. ● Did you select a wired LAN or a wireless LAN on the operation panel on the machine as well? This selection is required to have the machine switch to your selection. Selecting Wired LAN or Wireless LAN(P. 25) You are unsure of the SSID or the network key of the wireless router to be connected. The SSID is not displayed on the screen.
Troubleshooting If the problem persists even after checking the above: ● Turn off the devices, and then turn them on again. ● Wait for a while, and try again to connect to the network. Check whether the machine is turned ON. ● If the machine is turned ON, turn it OFF, and then turn it back ON. Check the installation site of the machine and the wireless router.
Troubleshooting ● When only IEEE 802.11n is used for the wireless communication, WEP is selected or the WPA/WPA2 encryption method is set to TKIP. Problem with the USB Connection Cannot communicate. ● Change the USB cable. If you are using a long USB cable, replace it with a short one. ● If you are using a USB hub, connect the machine directly to your computer using a USB cable. Problem with the Print Server You cannot find the print server to connect to.
Troubleshooting Printing Problems 2822-06W See Common Problems(P. 411) also. Printing results are not satisfactory. Paper creases or curls. When You Cannot Print Properly(P. 419) You cannot print. ● Can you print a Windows test page? If you can print a Windows test page, there is no problem with the machine or the printer driver. Check the print settings of your application. Printing a Test Page in Windows(P. 501) If the problems persist, check the items that suit your operational environment.
Troubleshooting ● Can you print from other computers on the network? If you also cannot print from other computers, contact your local authorized Canon dealer or the Canon help line. Wired LAN connection ● Have you selected the correct port? If there is no port to use, create a port. Checking the Printer Port(P. 502) Configuring Printer Ports(P.
Troubleshooting Printing seems to be slow. * ● Disabling Secure Print is recommended if you are not using it. Changing the Valid Time Period for Secured Documents(P. 170) * When the free space in memory is running low, the processing speed of the machine becomes slow, just as a computer does. There is nothing abnormal. You cannot print with Google Cloud Print. Using Google Cloud Print(P. 203) It takes a long time before printing starts.
Troubleshooting When You Cannot Print Properly 2822-06X If printing results are not satisfactory, or paper creases or curls, try the following solutions. If the problems persist, contact your local authorized Canon dealer or the Canon help line. ◼ Problems with Image Quality Smudge Marks Appear on the Bottom Edge of Printouts(P. 421) Printing Results Are Not Satisfactory(P. 421) Smudges Appear on Printouts(P. 421) Toner Smudges and Splatters Appear(P. 424) Printouts Are Faded(P.
Troubleshooting Black Spots Appear(P. 430) Reverse Side of Paper is Smudged(P. 430) ◼ Problems with Printout Paper Paper Creases(P. 432) ◼ Problems with Paper Feed Printouts Are Skewed(P. 434) Printed Barcode Cannot Be Read(P. 431) Paper Creases or Curls(P. 432) Paper Curls(P. 432) Paper Is Fed Incorrectly(P. 434) Paper Is Not Fed/Two or More Sheets Are Fed Together(P.
Troubleshooting Printing Results Are Not Satisfactory 2822-06Y Dirt inside the machine may affect printing results. Perform care and cleaning to the machine first. Cleaning(P. 387) Regular Smudge Marks Appear on the Bottom Edge of Printouts Are you using appropriate paper? ● Check the supported paper types and replace with an appropriate type. Also, set the paper size and type correctly. Available Paper(P. 478) Loading Paper(P. 121) Specifying Paper Size and Type(P.
Troubleshooting Do smudges appear when using the machine in an environment with low humidity? ● Change the setting for . The improvement effect is stronger with than . First try with . (P. 330) ● If is specified, print density may be lower or uneven when the machine is used in an environment with high humidity.
Troubleshooting Afterimages Appear in Blank Areas Are you using appropriate paper? ● Check usable paper, and replace with appropriate paper. Available Paper(P. 478) Loading Paper(P. 121) Do afterimages appear when you print on large size paper after printing on small size paper? ● Change the setting for . Setting to may solve the problem. (P. 330) ● If you set to , the printing speed may be slower.
Troubleshooting Toner Smudges and Splatters Appear Are you using appropriate paper? ● Check usable paper, and replace with appropriate paper. Available Paper(P. 478) Loading Paper(P. 121) Do toner smudges and splatters appear when using the machine in an environment with low humidity? ● Change the setting for . The improvement effect is stronger with than . First try with . (P.
Troubleshooting Are you using appropriate paper? ● Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings properly. Available Paper(P. 478) Loading Paper(P. 121) Specifying Paper Size and Type(P.
Troubleshooting A Portion of the Page Is Not Printed Do you print data without margins? ● This symptom occurs if a margin is set to none in the printer driver. A margin of 5 mm or less around the edge of paper or 10 mm or less around the edge of envelopes is not printable with the machine. Make sure to have margins around the document to print.
Troubleshooting Streaks Appear/Printing is Uneven Are you using appropriate paper? ● Check usable paper, and replace with appropriate paper. Available Paper(P. 478) Loading Paper(P. 121) Have you cleaned the fixing unit? ● Clean the fixing unit. Cleaning the Fixing Assembly(P.
Troubleshooting Is the amount remaining in toner cartridge running low? ● Check how much the amount remaining in toner cartridges is left, and replace the toner cartridges as necessary. ● Regardless of the displayed toner level, the toner cartridge may have reached the end of its lifetime due to the machine's environmental conditions and the deteriorated materials in the cartridge. Replace the toner cartridge. Replacing the Toner Cartridge(P.
Troubleshooting Does a void appear at the center of dark text or lines? ● Change the setting for . Setting to may solve the problem. (P. 330) ● If you set to , the print density may vary depending on the ambient humidity.
Troubleshooting Black Spots Appear Have you cleaned the fixing unit? ● Clean the fixing unit. Cleaning the Fixing Assembly(P. 389) Reverse Side of Paper is Smudged Have you loaded paper that is smaller than the size of the print data? ● Check to make sure that the paper size matches the size of the print data. Have you cleaned the fixing unit? ● Clean the fixing unit. Cleaning the Fixing Assembly(P.
Troubleshooting Printed Barcode Cannot Be Read Are you using a small barcode or a barcode consisting of thick lines? ● Enlarge the barcode. ● If the direction of lines in the barcode is perpendicular to the paper output direction, turn the image 90 degrees to make the lines parallel to the paper output direction. ● If the problem persists even after performing the above operation, change the mode by using [Barcode Adjustment Mode] in the printer driver.
Troubleshooting Paper Creases or Curls 2822-070 Paper Creases Is paper loaded correctly? ● If paper is not loaded below the load limit line or is loaded obliquely, it may crease. Loading Paper(P. 121) Are you using paper that has absorbed moisture? ● Replace with appropriate paper. Loading Paper(P. 121) Does this problem occur when printing on plain paper or thin paper? ● Change the setting for . Setting to may solve the problem. (P.
Troubleshooting Are you using appropriate paper? ● Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings properly. Available Paper(P. 478) Loading Paper(P. 121) Specifying Paper Size and Type(P. 137) ● Change the setting for . Setting to may solve the problem. (P. 329) ● If you set to , the printing speed may be slower. Are you using paper that has absorbed moisture? ● Replace with appropriate paper.
Troubleshooting Paper Is Fed Incorrectly 2822-071 Printouts Are Skewed Do the paper guides align with the edges of the paper? ● If the paper guides are too loose or too tight, the printouts are skewed. Loading Paper(P. 121) Paper Is Not Fed/Two or More Sheets Are Fed Together Is paper loaded correctly? ● Fan the paper stack thoroughly so that paper is not stuck together. ● Check whether paper is loaded correctly. Loading Paper(P.
Troubleshooting A Message or a Number Starting with "#" (an Error Code) Is Displayed 2822-072 When a message appears on the machine's display, or a number (error code) prefixed with "#" appears, see the following sections to check the solution. Countermeasures for Each Message(P. 436) Countermeasures for Each Error Code(P.
Troubleshooting Countermeasures for Each Message 2822-073 A message appears on the display when operation becomes impossible due to occurrence of an error during printing or memory capacity depletion. Find out more information about messages in the following list. A counterfeit or non-Canon cartridge may be in use. The amount in the cartridge cannot be displayed correctly. The toner cartridge used may not be a genuine Canon product.
Troubleshooting A cover is open. There is no paper loaded. The paper is jammed. The toner cartridge is consumed. An error has occurred. Cannot recognize the image. An image which cannot be previewed was selected in Memory Media Print. ● When the machine has insufficient memory space, preview cannot be displayed. Even JPEG or TIFF images may not be displayed. Cart. end of lifetime. Rplcmt. recommended. The toner cartridge has reached the end of its lifetime.
Troubleshooting ● Check that the same authentication method is set on this machine and the RADIUS server, and set the correct authentication method. Configuring IEEE 802.1X Authentication Settings(P. 250) Could not connect. Connection in Access Point Mode failed due to an error. ● Wait a few moments and try again. If you still cannot connect, try switching the machine off briefly. Connecting Directly (Access Point Mode)(P. 189) An error occurred when connecting in Access Point Mode.
Troubleshooting ● Decrease the number of devices (clients) that are connected to the wireless LAN router. For information on the maximum number of devices that can connect, see the instruction manual for the wireless LAN router or contact the manufacturer. Could not connect using Easy Connection via PC. The device will restart. Connection in Access Point Mode failed due to an error. ● Restart the machine, and then, perform again. (P.
Troubleshooting Could not perform cleaning. Paper jammed during cleaning. ● Remove the jammed paper, set paper correctly, and perform cleaning again. Clearing Paper Jams(P. 454) Cleaning the Fixing Assembly(P. 389) The amount remaining in toner cartridges required for cleaning the fixing unit is insufficient. ● Cleaning requires sufficient toner cartridge remaining. Replace the toner cartridge, and perform the cleaning again. Procedure for Replacing the Toner Cartridge(P.
Troubleshooting Direct Connection terminated. Connection with the mobile device was interrupted. ● Establish Direct Connection again. Connecting Directly (Access Point Mode)(P. 189) Easy Connection via PC ended due to timeout The device will restart./Easy Conn. via PC ended due to timeout Device will restart. 30 minutes have passed since the start of the procedure for Easy Connection via PC (cableless setup mode), but PC still cannot be connected.
Troubleshooting Google Cloud Print not avail. Server auth err Cloud Print could not perform server authentication, or could not acquire information for registration. ● Check whether the date and time settings are correctly specified. (P. 293) Google Cloud Print not avail. Server comm err Cloud Print is unavailable due to an error. ● Check whether the machine is correctly connected to a wireless LAN or wired LAN. Connecting to a Wireless LAN(P. 27) Connecting to a Wired LAN(P.
Troubleshooting Specifying Paper Size and Type(P. 137) Available Paper(P. 478) ● If you print received documents on paper other than A4 or Letter size, some portions of the image may be missing or the image may be divided and printed onto several sheets. Mem. full. Check error w/ Status Monitor key. The memory became full of print data that could not be printed due to errors.
Troubleshooting Memory Media Print is restricted. The function that prints files in a USB memory device is disabled. ● Set
Troubleshooting Paper jammed. Paper jams. ● Remove the jammed paper, and print again (Printing may resume automatically). Clearing Paper Jams(P. 454) Paper Settings and Loaded Size Mismatch The paper size setting on the operation panel does not match the loaded paper size. ● Match the paper size setting specified in and the size of the paper that is actually loaded. To use the loaded paper Change the setting of to match the loaded paper size.
Troubleshooting ● Log in with a Department ID for which printing is not disabled. For the Department ID and PIN, contact your Administrator. Setting the Department ID Management(P. 212) Set the correct authentication information. The client authentication information (key and certificate, user name and password, or CA certificate) is not set correctly. ● Check the specified authentication method and authentication information (key and certificate, user name and password, and CA certificate).
Troubleshooting The authentication server certificate is incorrect. There is no CA certificate registered in the printer that is compatible with the authentication server certificate. ● Check that there is a CA certificate registered in the printer that is compatible with the authentication server certificate. Configuring IEEE 802.1X Authentication Settings(P. 250) The memory is full. Printing was impossible due to insufficient memory space. ● If a printing job is queued, wait until the job is completed.
Troubleshooting Use Remote UI to set the information necessary for authentication./Use Remote UI to set info. necessary for authentication. The IEEE 802.1X settings are incorrect. ● Check whether [Login Name] is set correctly. ● Check whether the [Use TLS], [Use TTLS], or [Use PEAP] check box is selected. ● If using TLS, check whether a "key and certificate" is registered. ● If using TTLS or PEAP, check whether a user name and password are set correctly. Configuring IEEE 802.1X Authentication Settings(P.
Troubleshooting Countermeasures for Each Error Code 2822-074 If an error occurs such as when printing is not successful or when you cannot receive an I-Fax, the corresponding error code is displayed in the job log screen as a three-digit number. Check the following to find out causes and solutions for each error code. For details of the job log screen, see Screen(P. 107) . #037 The file is too large to print.
Troubleshooting Continuing operating without entering a Department ID was attempted even though unknown-ID jobs (functions that permit operations without a Department ID and PIN) were disabled in the Department ID Management. ● Enable unknown-ID jobs in System Manager Mode in Remote UI. Blocking Jobs When Department ID Is Unknown(P. 216) #752 I-Fax receiving was impossible because an incorrect POP3 server name was set. ● Check the POP3 server name, and correct the setting.
Troubleshooting #810 An error has been returned from the POP3 server at the time of receiving an I-Fax. ● Check whether the POP3 server is set correctly. ● Check whether your mail server and network are running correctly. For more information, contact your Network Administrator. #816 The number of print pages has reached the upper limit specified for the department. ● To reset the print page count, click [Clear Count] on the [Department ID Management] page of Remote UI.
Troubleshooting Printer Functions(P. 482) #827 The received data is not supported (includes unsupported MIME information). ● Contact the other party and ask them to check the settings and then resend the data. #829 The received data exceeds the maximum receivable size. ● In I-Fax reception, the machine cannot receive the e-mail if its size exceeds 24 MB. Ask the sender to reduce the size of the e-mail down to under 24 MB and try resending. #852 The machine turns OFF for some reason.
Troubleshooting Password protected PDF files could not be printed. ● Enter the correct password for the PDF file. Printing from a USB Memory Device (Memory Media Print)(P. 173) #861 A document could not be printed because a printer driver that was not intended for this machine was used. ● Print again by using the printer driver for this machine. Basic Printing Operations(P. 160) A document could not be printed due to a defect in its data. ● Check the document data for any defects.
Troubleshooting Clearing Paper Jams 2822-075 If a paper jams, is displayed on the screen. Press ( ) to display simple solutions. If it is difficult to understand the procedures on the display, see the following sections to clear jams. Multi-purpose tray/Paper drawer Paper Jams in a Paper Source(P. 462) Interior Paper Jams in the Main Unit(P. 456) Duplex transport guide Paper Jams in the Main Unit(P. 456) Back side Paper Jams in the Main Unit(P.
Troubleshooting If paper jams repeatedly ● Tap the paper stack on a flat surface to even the edges of the paper before loading it into the machine. ● Check that the paper is appropriate for the machine. Available Paper(P. 478) ● Check that no jammed paper fragments remain in the machine. Do not forcibly remove the jammed paper from the machine ● Forcibly removing the paper may damage parts. If you are not able to remove the paper, contact your local authorized Canon dealer or the Canon help line.
Troubleshooting Paper Jams in the Main Unit 2822-076 Remove the jammed paper according to the procedure that matches the location at which a paper jam occurred. Interior Paper Jams inside the Machine or in the Back Side(P. 456) Duplex transport guide Paper Jams at the Duplex Transport Guide(P. 459) Back side Paper Jams inside the Machine or in the Back Side(P.
Troubleshooting 3 Hold the front side green knob and lift the transport guide. ● Keep holding the transport guide until returning it to the original position in step 5. 4 Gently pull out the paper. 5 Gently return the transport guide back in place. 6 Hold the front side green knob and lift the transport guide. ● Keep holding the transport guide until returning it to the original position in step 8.
Troubleshooting 7 Gently pull out the paper. ● Pull out the paper flatly as much as possible to prevent unfixed toner from being dropped. 8 Gently return the transport guide back in place. 9 Open the rear cover. 10 Gently pull out the paper.
Troubleshooting 11 Close the rear cover. 12 Install the toner cartridge. ● Make sure to push in the cartridge until it stops. 13 Close the front cover. When the message is still displayed ● Paper may be jammed in other locations. Check other locations, and remove jammed paper if any. If the message is still displayed, check whether the front cover is securely closed.
Troubleshooting 3 Gently pull out the paper. 4 Return the duplex transport guide back to position. ● Fully close the guide until it clicks. 5 Set the paper drawer. 6 Open and close the front cover. ● When the front cover is opened and closed, the paper jam message disappears. 1 Open the front cover. 2 Close the front cover.
Troubleshooting When the message is still displayed ● Paper may be jammed in other locations. Check other locations, and remove jammed paper if any. If the message is still displayed, check whether the front cover is securely closed.
Troubleshooting Paper Jams in a Paper Source 2822-077 Remove the jammed paper according to the procedure that matches the location at which a paper jam occurred. Multi-purpose tray Paper Jams in the Multi-Purpose Tray(P. 462) Paper drawer Paper Jams in the Paper Drawer(P. 462) Paper Jams in the Multi-Purpose Tray If there is paper loaded in the tray, remove it first.
Troubleshooting ● Make sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage the paper drawer by dropping it, if it slides out too easily. 2 Gently pull out the paper. ● When the optional cassette feeding module is attached, gently pull out the paper in the same way. 3 4 Set the paper drawer. Select when the message is displayed on the screen.
Troubleshooting When a Problem Cannot Be Solved 2822-078 If you cannot solve a problem by referring to the information in this chapter, contact your local authorized Canon dealer or the Canon help line. Do not disassemble or repair the machine yourself ● If you disassemble or repair the machine yourself, it may not be covered by warranty.
Appendix Appendix Appendix ............................................................................................................................................................. 466 Third Party Software ......................................................................................................................................... 468 Feature Highlights ............................................................................................................................................
Appendix Appendix 2822-079 This chapter contains technical specifications of this machine, instructions on how to use the User's Guide, disclaimers, copyright information, and other important information for customers. ◼ Machine Specifications See the following section(s) when you want to check the specifications of the main unit and optional equipment, network environment, print function, and so on. Specifications(P.
Appendix Third Party Software(P. 468) Feature Highlights(P. 469) Basic Windows Operations(P. 499) Notice(P.
Appendix Third Party Software 2822-07A For information related to third-party software, click the following icon(s).
Appendix Feature Highlights 2822-07C This section describes tips for leveraging the features of the machine by category. You can make use of the features according to your intended purposes and operating environment. Going Green and Saving Money(P. 470) Improving Efficiency(P. 471) So Much More(P.
Appendix Going Green and Saving Money 2822-07E There are lots of ways to cut back on paper, toner, power, and expenses. 2-Sided Printing Sleep Mode You can use the 2-sided printing function to print data from your computer and print received I-Fax documents. Because For saving energy and money, a sleep mode that powers down a machine when nobody is using it has become an essential feature.
Appendix Improving Efficiency 2822-07F Here are some simple operations that can make complicated tasks more efficient. Print Images Right Off Your USB Memory Device Remote Management with Remote UI Plug a USB memory device into the machine and you can print images and documents directly, without Remote UI lets you manage a lot from your computer, all without having to go over to the machine.
Appendix So Much More 2822-07H There are a variety of features for whatever you need to do - at home, in the office, or even on the road.
Appendix Hook up to Google Cloud Print with your laptop or cell phone, send your data, and out come your printed documents. With this machine, Google Cloud Print, and your mobile device, print whenever you want from wherever you want. Using Google Cloud Print(P. 203) Normally, when you print something from your computer, it comes out of the printer right away. However, if you have sensitive documents, this may not be what you want.
Appendix Specifications 2822-07J Specifications are subject to change without notice for product improvement or future release. ◼ Machine Specifications Main Unit(P. 475) Available Paper(P. 478) ◼ Specifications of Optional Equipment Cassette Feeding Module-AH(P. 481) ◼ Functional Specifications Printer Functions(P. 482) Management Functions(P. 484) ◼ Environment To Use the Machine System Environment(P. 486) Network Environment(P.
Appendix Main Unit 2822-07K ● For information on paper sizes and types for each paper source, see " Type Desktop Color Supported Black and White Resolution for Writing 600 dpi x 600 dpi Number of Tones 256 Acceptable Paper Stock Paper Sizes Available Paper(P. 478) ." ● Max: 215.9 mm x 355.6 mm ● Min (Paper Drawer): 105 mm x 148 mm ● Min (Multi-Purpose Tray): 76.
Appendix Paper Output System/Capacity *3 Output Tray 150 sheets (68 g/m²) Power Source AC 220 V - 240 V, 3.4 A, 50 Hz/60 Hz Power Consumption *1 Maximum Power Consumption 1,300 W or less During Sleep Mode ● Approx. 0.9 W (USB connection) ● Approx. 0.9 W (wired LAN connection) ● Approx. 0.9 W (wireless LAN connection) With the Main Power Turned OFF 0.1 W or less Dimensions (W x D x H) LBP215x: 438 mm x 373 mm x 312 mm LBP214dw / LBP212dw: 401 mm x 373 mm x 250 mm Weight LBP215x: Main Unit *4 Approx.
Appendix *4The toner cartridge is not included.
Appendix Available Paper 2822-07L The paper types that can be used with this machine are shown in the following table.
Appendix Paper Drawer *1 Multi-Purpose Tray Automatic 2-Sided Printing *2 Paper Sizes Envelope No.10 (COM10) Envelope Monarch Envelope C5 Envelope DL Custom Paper Size *6 *1Includes *7 *8 the optional Cassette Feeding Module-AH. *2Automatic 2-sided printing is available without replacing paper. *3Allows you to print received I-Fax documents. *4Allows you to print reports or lists. *5Landscape or portrait orientation is available. *6The custom size ranging from 105 mm x 148 mm to 215.
Appendix Paper Type Thin 1 *3*5 60 g/m² Thin 2 52 g/m² to 59 g/m² Bond 1 60 g/m² to 74 g/m² Bond 2 75 g/m² to 104 g/m² Bond 3 105 g/m² to 120 g/m² Paper Drawer *1 Multi-Purpose Tray Automatic 2-Sided Printing *2 Labels Envelope Envelope H *1Includes the optional Cassette Feeding Module-AH. *2Automatic 2-sided printing is available without replacing paper. *3Allows you to print received I-Fax documents. *4Allows you to print reports or lists.
Appendix Cassette Feeding Module-AH 2822-07R Paper Sizes ● Max: 215.9 mm x 355.6 mm ● Min: 105 mm x 148 mm Paper Weight 52 g/m² to 120 g/m² Paper Drawers Capacity * 550 sheets (80 g/m²)/640 sheets (64 g/m²) x 1 Dimensions 399 mm x 373 mm x 156 mm (W x D x H) Weight Approx. 3.8 kg *May vary depending on the installation environment and paper to use.
Appendix Printer Functions 2822-07S ◼ UFR II Printer Function Type Internal Print Size Available Paper(P. 478) Print Speed Main Unit(P. 475) Resolution Data Processing 1200 dpi x 1200 dpi, 600 dpi x 600 dpi Page Description Language (PDL) UFR II Protocol Supported TCP/IP: LPD, Port9100, IPP, IPPS, WSD Resident Fonts None Interface USB USB 2.0 Hi-Speed Wired LAN 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3 compliant) Wireless LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.
Appendix Resident Fonts 136 Roman Interface USB USB 2.0 Hi-Speed Wired LAN 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3 compliant) Wireless LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.11n *The PS printer function is available with the LBP215x / LBP214dw. ◼ PCL Printer Function Type Internal Print Size Available Paper(P. 478) Print Speed Main Unit(P.
Appendix Management Functions 2822-07U ◼ Firewall Settings ● Up to 16 IP addresses (or ranges of IP addresses) can be specified for both IPv4 and IPv6. ● The packet filters described in this section control communications over TCP, UDP, and ICMP. ● Up to 32 MAC addresses can be specified. ◼ IPSec ● IPSec that is supported by the machine conforms to RFC2401, RFC2402, RFC2406, and RFC4305. ● Windows Vista ● Windows 7 Operating system ● Windows 8 ● Windows 8.
Appendix ◼ Registration of Keys and Certificates ● If you install a key or CA certificate from a computer, make sure that they meet the following requirements: ● Key: PKCS#12*1 Format ● CA certificate: X.509 DER/PEM ● Key: ".p12" or ".pfx" File extension ● CA certificate: ".cer" or ".
Appendix System Environment 2822-07W System Requirements for the Remote UI *1 Windows ● Windows 7 / 8.1 / 10: Internet Explorer 11 or later ● Windows 10: Edge macOS ● Mac OS X 10.5 or later ● Safari 5.0.6 or later Android ● Chrome ● UC Browser iOS ● Safari ● UC Browser I-Fax Receiving Server Software ● Microsoft Exchange Server 2007 SP3 ● Microsoft Exchange Server 2010 ● Microsoft Exchange Server 2013 ● Lotus Domino R7.0 ● Qpopper 4.0.
Appendix Network Environment 2822-07X ◼ Common Specifications Protocol Supported TCP/IP ● Frame type: Ethernet II ● Print applications: LPD, Raw, IPP, IPPS, WSD, Mopria, Google Cloud Print, AirPrint, Windows10 Mobile Print ◼ Wired LAN Specifications Interface Interface supporting 10BASE-T, 100BASE-TX, 1000BASE-T (RJ-45) ◼ Wireless LAN Specifications Standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Transmission Scheme IEEE 802.11b (Modulation system: DS-SS) IEEE 802.
Appendix Options 2822-07Y Installing options on the machine enables you to use more features. ◼ Knowing What Types of Options are Available Optional Equipment(P. 489) System Options(P. 490) ◼ Looking for Optional Equipment by Purpose Adding a Paper Drawer Cassette Feeding Module-AH(P.
Appendix Optional Equipment 2822-080 The functionality of the machine can be fully utilized by using the optional equipment described below. Optional equipment can be purchased from the retail outlet where you purchased the machine or from your local Canon dealer. Cassette Feeding Module-AH Installing this cassette feeding module enables you to load paper of a different size than that of paper loaded in the standard paper drawer. This surely reduces the time and labor for paper replacement.
Appendix System Options 2822-081 The machine performance can be enhanced even more by installing system options. Barcode Printing Kit(P. 490) License Registration(P. 490) Barcode Printing Kit This option enables you to generate barcodes in various formats. Note that if you want to print barcodes, PCL must be enabled. For information on using the Barcode Printing Kit, see the Barcode Printing Guide (PDF manual).
Appendix 5 Enter the license key using the numeric keys, and select . ➠ Registration starts. Wait until the message is displayed. ● If the message is displayed, enable the functions that are required to activate the option and register the license key again. 6 Select . 7 Restart the machine.
Appendix Manuals and Their Contents 2822-082 The manuals listed below are included with the machine. Refer to them as necessary. Getting Started Read this manual first. It describes basic setup procedures, from removing the packing materials to setting up the machine. User's Guide (This Manual) This manual describes all the functions of the machine in a manual that is viewed using a Web browser. You can browse information by category or enter a keyword to search for pages on a specific topic.
Appendix Using User's Guide 2822-083 The User's Guide is a manual that can be viewed on your computer or mobile device and it describes all of the functions of the machine. You can search from your intended use or enter a keyword to quickly find the page you are looking for. The section describes the screen layout of the User's Guide and how to read the Guide. You can specify how the appearance of the User's Guide looks.
Appendix Screen Layout of User's Guide 2822-084 The User's Guide is divided into different screens, and the content of each screen varies. Top Page Appears when User's Guide is started. / Click to also display all of the sections under the chapters. Click to return to the previous display. / Click to toggle the display between the contents and search. When the table of contents is displayed, each click on switches between hiding and showing the display.
Appendix Topic Page Contains information about how to configure and use the machine. Navigation See what chapter topic you are currently viewing. Click to jump to the corresponding page. To return to the previous page, click "Back" on your Web browser. / Click to display the hidden detailed descriptions. Click to close the detailed descriptions. Click to return to the page top. Search Click to display the search window.
Appendix [Enter keyword(s) here] to display the search results. You can search for pages Enter a keyword or keywords and click containing all the keywords by separating the keywords by a space (blank). Also you can only search for pages containing an exact phrase by enclosing the keywords in double quotation marks. Search result Displays the search results of the pages that contain the specified keywords. From the results, locate the page you are looking for and click the topic title of the page.
Appendix Viewing User's Guide 2822-085 This section describes the marks, buttons, screens, and other items used in the User's Guide. The warnings and cautions are also given in the "Important Safety Instructions" in the "Getting Started" included with the machine. See also these instructions. Marks Cautions regarding safety, restrictions and cautions regarding the handling of the machine, useful tips, and other information are indicated using the marks below.
Appendix / / (Black and White LCD Model) , , and on the operation panel are used to select the target item in settings, but their description is omitted in the User's Guide. The operation for selecting using or and pressing is represented as shown below in the User's Guide. 1 Select . Computer Screens Used in This Manual Unless otherwise noted, displays used in the User's Guide are those for the LBP215x.
Appendix Basic Windows Operations 2822-087 Displaying the Printer Folder(P. 499) Enabling [Network discovery](P. 499) Displaying Shared Printers in the Print Server(P. 500) Printing a Test Page in Windows(P. 501) Checking the Bit Architecture(P. 501) Checking the Printer Port(P. 502) Checking Bidirectional Communication(P. 503) Checking the SSID to Which Your Computer is Connected(P. 504) When Printing from the Windows Store App(P. 505) ● Depending on the computer that you use, the operation may differ.
Appendix Right-click [Start] select [Control Panel] [View network status and tasks] settings] select [Turn on network discovery] under [Network discovery]. [Change advanced sharing Windows 10 [ ] select [Windows System] [Control Panel] [View network status and tasks] sharing settings] select [Turn on network discovery] under [Network discovery]. Windows Server 2008 [Start] select [Control Panel] double-click [Network and Sharing Center] discovery] under [Network discovery].
Appendix ◼ Printing a Test Page in Windows You can check whether the printer driver is operational by printing a test page in Windows. 1 Load A4 size paper in the paper drawer. 2 Open the printer folder. 3 Right-click the printer driver icon for this machine, and click [Printer properties] or 4 Click [Print Test Page] in [General] tab. Loading Paper in the Paper Drawer(P. 123) Displaying the Printer Folder(P. 499) [Properties]. ➠ The test page is printed.
Appendix Windows Vista/7/Server 2008 [Start] select [Control Panel]. Windows 8/Server 2012 Right-click the lower-left corner of the screen select [Control Panel]. Windows 8.1/Server 2012 R2 Right-click [Start] select [Control Panel]. Windows 10/Server 2016 Proceed to step 2. 2 Display [System]. Windows Vista/7/8/Server 2008 R2/Server 2012 Click [System and Maintenance] or [System and Security] Windows 10/Server 2016 Click [ ] [Settings] [System] [System]. select [About].
Appendix 3 In the [Ports] tab, check that the port is selected correctly. If you are using a network connection and have changed the machine's IP address ● You need to add a new port. Configuring Printer Ports(P. 54) ◼ Checking Bidirectional Communication 1 2 Open the printer folder. Displaying the Printer Folder(P. 499) Right-click the printer driver icon for this machine, and click [Printer properties] or [Properties].
Appendix 3 In the [Ports] tab, make sure that the [Enable bidirectional support] check box is selected. ◼ Checking the SSID to Which Your Computer is Connected If your computer is connected to a wireless LAN network, click SSID of the connected wireless LAN router.
Appendix ◼ When Printing from the Windows Store App Windows 8/Server 2012 Display the charms on the right side of the screen Windows 8.1/Server 2012 R2 Display the charms on the right side of the screen use [Print]. Windows 10 Tap or click [Print] on the application Tap or click [Devices] The driver that you use Tap or click [Devices] [Print] The driver that you use [Print]. The driver that you [Print]. ● If you print using this method, only a limited number of print settings are available.
Appendix Notice 2822-088 ◼ IPv6 Ready Logo The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-2 established by the IPv6 Forum. ◼ Product Information required by COMMISSION REGULATION (EU) No 801/2013 amending Regulation (EC) No 1275/2008 Power consumption of the product in networked standby if wired network ports are connected and all wireless network ports are activated (if they are available at the same time).
Appendix ◼ Environmental Information Reducing your environmental impact while saving money Power Consumption and Activation Time The amount of electricity a device consumes depends on the way the device is used. This product is designed and set in a way to allow you to reduce your electricity costs. After the last print it switches to Ready Mode. In this mode it can print again immediately if required. If the product is not used for a time, the device switches to its Power Save Mode.
Appendix Adobe, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Copyright © 2007 -08 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 5,737,599; 5,781,785; 5,819,301; 5,929,866; 5,943,063; 6,073,148; 6,515,763; 6,639,593; 6,754,382; 7,046,403; 7,213,269; 7,242,415; Patents pending in the U.S. and other countries.
Appendix All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated. The name PostScript also is used as a product trademark for Adobe Systems' implementation of the PostScript language interpreter.
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.
Third-Party Services If you use third-party services through the PRODUCT, use of the services are subjected the conditions below.
The Software Subjected to the Other License Conditions Please refer to Table of Software and respective License terms below, for more detail and corresponding license conditions.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
HarfBuzz 2012-07-30 Copyright (C) 2006 Behdad Esfahbod Copyright (C) 1998-2004 David Turner and Werner Lemberg Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies) Copyright (C) 2004,2007 Red Hat, Inc. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and its documentation for any purpose, provided that the above copyright notice and the following two paragraphs appear in all copies of this software.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Lua Copyright © 1994–2014 Lua.org, PUC-Rio.
LuaSocket LuaSocket 2.0.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
Third-Party Services If you use third-party services through the PRODUCT, use of the services are subjected the conditions below.
The Software Subjected to the Other LicenseConditions Please refer to Table of Software and respective License terms below, for more detail and corresponding license conditions.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
