User`s guide

4-12
Paper Loading and Output Tray
Paper Source
4
NOTE
• CASSETTE 2 is displayed only when the paper feeder is installed.
• If paper of the same size is loaded in two or more paper sources when the paper
source setting is specified to be selected automatically, paper is fed from the upper
paper source regardless of the status of the (Paper Source) indicators. When
the paper source runs out of paper, the paper source automatically switches to
other one in which paper of the same size is loaded.
Precautions for Handling the Multi-purpose Tray or Paper
Cassette
Be careful of the following points when handling the multi-purpose tray or paper
cassette.
IMPORTANT
• Be sure to turn the printer ON once when loading paper in the paper cassette for the first
time after installing the paper feeder.
• Do not pull out the paper cassette while the printer is printing. This may result in paper
jams or damage to the printer.
• Do not touch the paper in the multi-purpose tray or pull it out during printing. This may
result in a faulty operation.
• Refill the paper cassette after all the loaded paper runs out. If the cassette is refilled
when paper still remains in the cassette, it may result in misfeeds.
• Do not put anything other than the printing paper on the multi-purpose tray. Also, do not
press on top of or apply excessive force to the multi-purpose tray. This may result in
damage to the multi-purpose tray.
• Do not touch the black rubber pad (A) in the paper cassette. This may result in misfeeds.
• If you are printing from Cassette 2, make sure that Cassette 1 is set before printing. If you
print from Cassette 2 when Cassette 1 is not set, this will cause paper jams.
NOTE
Remove the paper loaded in the multi-purpose tray before closing it. Keep the
multi-purpose tray closed when it is not used.
(A)
Downloaded from ManualsPrinter.com Manuals