LBP654Cx / LBP653Cdw / LBP613Cdw / LBP611Cn Anwenderhandbuch USRMA-2088-03 2018-04 de Copyright CANON INC.
Inhalt Wichtige Sicherheitsvorschriften .................................................................................................... Aufstellung 2 ............................................................................................................................................................... 3 Stromversorgung Handhabung ...................................................................................................................................................... 5 ..........
Vorderseite ........................................................................................................................................................ 88 Setzen Sie ein USB-Speichergerät ein Rückseite Innen .............................................................................................................. 90 ........................................................................................................................................................... 92 .............
Verbindung mit Mobilgeräten ....................................................................................................... Verbinden mit Mobilgeräten .................................................................................................................................
................................................................................................................................... 300 .............................................................................................................................. 304 ...................................................................................................................................................
Die Druckergebnisse sind nicht zufriedenstellend Das Papier weist Falten auf oder wellt sich Papier wird nicht korrekt zugeführt ................................................................................................. 473 ........................................................................................................... 485 ....................................................................................................................
Wichtige Sicherheitsvorschriften Wichtige Sicherheitsvorschriften Wichtige Sicherheitsvorschriften ............................................................................................................. 2 Aufstellung ............................................................................................................................................................ 3 Stromversorgung .................................................................................................................
Wichtige Sicherheitsvorschriften Wichtige Sicherheitsvorschriften 2529-000 In diesem Kapitel wird beschrieben, wie Sie Sachschäden und Verletzungen bei den Benutzern des Geräts und anderen Personen vermeiden können. Lesen Sie dieses Kapitel vor der Inbetriebnahme des Geräts durch, und befolgen Sie die Anweisungen für die ordnungsgemäße Verwendung. Bedienen und verwenden Sie das Gerät ausschließlich wie in dieser Anleitung beschrieben.
Wichtige Sicherheitsvorschriften Aufstellung 2529-001 Lesen Sie die folgenden Sicherheitshinweise sorgfältig durch, und stellen Sie das Gerät an einem geeigneten Ort auf, sodass Sie es sicher und komfortabel verwenden können.
Wichtige Sicherheitsvorschriften Sonstige Vorsichtsmaßnahmen ● Befolgen Sie beim Tragen des Geräts die Anweisungen in dieser Anleitung. Wenn Sie das Gerät falsch tragen, kann es herunterfallen und Verletzungen verursachen. ● Achten Sie beim Aufstellen des Geräts darauf, sich nicht die Hände zwischen dem Gerät und dem Boden oder einer Wand einzuklemmen. Andernfalls besteht Verletzungsgefahr.
Wichtige Sicherheitsvorschriften Stromversorgung 2529-002 ● Schließen Sie das Gerät ausschließlich an einen Netzanschluss mit der angegebenen Netzspannung an. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags. ● Verwenden Sie ausschließlich das mitgelieferte Netzkabel. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags. ● Das mitgelieferte Netzkabel ist zur Verwendung mit diesem System vorgesehen. Schließen Sie das Netzkabel nicht an andere Geräte an.
Wichtige Sicherheitsvorschriften Handhabung 2529-003 ● Trennen Sie umgehend den Netzstecker von der Netzsteckdose, und wenden Sie sich an einen autorisierten Canon Händler, wenn von dem Gerät ungewöhnliche Geräusche oder Gerüche ausgehen oder es zu Rauch- oder übermäßiger Wärmeentwicklung kommt. Bei fortgesetztem Betrieb kann es zu Feuer oder einem elektrischen Schlag kommen. ● Zerlegen und modifizieren Sie das Gerät nicht.
Wichtige Sicherheitsvorschriften LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn ● Tragen Sie das Gerät nicht zusammen mit eingesetzten Papierkassetten oder installierter Kassetteneinheit. Andernfalls können sie herausfallen und Verletzungen verursachen. Laserstrahl ● Wenn der Laserstrahl aus dem Gerät austritt, kann eine Bestrahlung der Augen schwere Sehschäden zur Folge haben. Beim Transport des Geräts ● Beachten Sie zur Vermeidung von Transportschäden folgende Anweisungen.
Wichtige Sicherheitsvorschriften ● Berühren Sie nicht die Kontakte ( ) im Geräteinneren. Andernfalls kann es zu Schäden am Gerät kommen. ● Während des Druckvorgangs dürfen Sie das Gerät nicht ausschalten, die Abdeckungen nicht öffnen bzw. schließen und kein Papier einlegen oder herausnehmen, da es sonst zu einem Papierstau kommen kann.
Wichtige Sicherheitsvorschriften Wartung und Überprüfung 2529-004 Reinigen Sie das Gerät regelmäßig. Wenn sich Staub ansammelt, funktioniert das Gerät möglicherweise nicht ordnungsgemäß. Beachten Sie beim Reinigen die folgenden Anweisungen. Wenn während des Betriebs ein Problem auftritt, schlagen Sie in Fehlerbehebung(P. 461) nach. Wenn Sie das Problem nicht beheben können oder der Meinung sind, dass eine Überprüfung erforderlich ist, schlagen Sie in Wenn sich ein Problem nicht beheben lässt(P. 521) nach.
Wichtige Sicherheitsvorschriften Verbrauchsmaterial 2529-005 ● Entsorgen Sie gebrauchte Tonerpatronen oder Ähnliches nicht durch Verbrennen. Lagern Sie Tonerpatronen oder Papier nicht in der Nähe offener Flammen. Ansonsten können sich Toner oder Papier entzünden, und es besteht Verbrennungs- oder Feuergefahr.
Wichtige Sicherheitsvorschriften ● So vermeiden Sie, dass die Oberfläche ( ) der Trommel im Gerät verkratzt oder dem Licht ausgesetzt wird. Berühren Sie nicht die elektrischen Kontakte ( ) oder den Tonerpatronenspeicher ( ). ● Nehmen Sie die Tonerpatrone nicht unnötigerweise aus dem Gerät oder der Schutzhülle. ● Die Tonerpatrone ist ein Produkt mit magnetischen Eigenschaften.
Wichtige Sicherheitsvorschriften Verfügbarkeitszeitraum von Ersatzteilen und Tonerpatronen und dergleichen ● Die Ersatzteile und Tonerpatronen und dergleichen für das Gerät sind mindestens sieben (7) Jahre lang nach Einstellung der Produktion dieses Gerätemodells erhältlich. Verpackungsmaterial der Tonerpatronen ● Heben Sie die Schutzhülle für die Tonerpatrone auf. Sie benötigen diese Teile beim Transport des Geräts.
Konfigurieren Konfigurieren Konfigurieren ..................................................................................................................................................... 14 Hauptfunktionen ................................................................................................................................................. 15 Vor dem Gebrauch erforderliche Vorbereitungen ............................................................................................
Konfigurieren Konfigurieren 2529-006 Bevor Sie die Funktionen des Geräts verwenden, müssen Sie die Umgebungsbedingungen im Voraus einstellen. Prüfen Sie zu Beginn die für die Konfiguration erforderlichen Abläufe, und führen Sie dann die tatsächlichen Einstellungen durch. Vor dem Gebrauch erforderliche Vorbereitungen(P. 16) ● Die am Gerät installierten Funktionen variieren je nach dem von Ihnen erworbenen Modell. Bevor Sie das Gerät verwenden, gehen Sie zu den Hauptfunktionen(P.
Konfigurieren Hauptfunktionen 2529-007 Diese Anleitung beinhaltet alle Funktionen der von Ihnen erworbenen Modellserie. Prüfen Sie, bevor Sie beginnen, welche Funktionen an dem von Ihnen erworbenen Modell verfügbar sind.
Konfigurieren Vor dem Gebrauch erforderliche Vorbereitungen 2529-008 Konfigurieren Sie das Gerät anhand der folgenden Schritte 1 bis 3. Wenn Sie weitere Informationen zu einem bestimmten Schritt wünschen, klicken Sie auf den Link, um den entsprechenden Abschnitt aufzurufen. Prüfen Sie zum sicheren Bedienen des Geräts darüber hinaus Verhindern von unbefugtem Zugriff(P. 17) . Schritt 1 Einrichten mithilfe der Installationsanleitung(P. 19) Schritt 2 Konfiguration der Netzwerkumgebung(P.
Konfigurieren Verhindern von unbefugtem Zugriff 2529-009 In diesem Abschnitt werden die Sicherheitsmaßnahmen beschrieben, die ergriffen werden sollten, um einen unbefugten Zugriff über das externe Netzwerk zu verhindern. Dieser Abschnitt sollte von allen Benutzern und Administratoren vor der Verwendung dieses Geräts und anderer Drucker und Multifunktionsgeräte gelesen werden, die mit dem Netzwerk verbunden sind.
Konfigurieren Informationen zum Überprüfen der IP-Adresse finden Sie unter Einstellen der IPv4-Adresse(P. 41) . ● Wenn einem Drucker oder Multifunktionsgerät eine globale IP-Adresse zugewiesen wurde, können Sie eine Netzwerkumgebung erstellen, in der das Risiko eines unbefugten Zugriffs verringert wird, indem Sie Sicherheitssoftware wie eine Firewall installieren, die den Zugriff über externe Netzwerke verhindert.
Konfigurieren Einrichten mithilfe der Installationsanleitung 2529-00A Wenn Sie das Gerät zum ersten Mal ( Einschalten des Geräts(P. 101) ) einschalten, wird die Konfigurationsanleitung gestartet, um Ihnen bei der Konfiguration der Anfangseinstellungen des Geräts mithilfe der Bildschirmanweisungen behilflich zu sein. Die Einstellungsbildschirme werden in der Konfigurationsanleitung in der folgenden Reihenfolge angezeigt.
Konfigurieren Schritt 4 Einstellen der Wireless LAN-Verbindung Konfigurieren Sie die Einstellungen für die Verbindung zum Netzwerk mithilfe von Wireless LAN. 1 Wählen Sie . ● Wenn Sie auswählen, wird Wireless LAN nicht eingestellt, und die Konfigurationsanleitung fährt mit Schritt 5 fort. 2 Wählen Sie . 3 Wählen Sie die Einstellungsmethode aus. ● Weitere Informationen zu den Wireless LAN-Einstellungen finden Sie unter Herstellen einer Verbindung zu einem Wireless LAN(P. 27) .
Konfigurieren Einstellen von Datum und Uhrzeit 2529-00C Stellen Sie das Datum und die Uhrzeit für das Gerät ein. Das Datum und die Uhrzeit werden als Referenz für die Funktionen verwendet, die die Zeit angeben, sie müssen daher akkurat eingestellt werden. Einstellen der Zeitzone(P. 21) Einstellen des aktuellen Datums und der Uhrzeit(P. 21) Einstellen der Sommerzeit(P.
Konfigurieren 3 Geben Sie Datum und Uhrzeit ein. Touchpanel-Modell ● Tippen Sie auf das Eingabefeld, und geben Sie Datum und Uhrzeit ein. Schwarzweiß LCD-Modell ● Verschieben Sie den Cursor mit oder , und geben Sie das Datum und die Uhrzeit mit den Zahlentasten ein. 4 Drücken Sie ( ). ● Stellen Sie ein, bevor Sie das aktuelle Datum und die Uhrzeit einstellen. Wenn Sie die Einstellung für später ändern, ändert sich das aktuelle Datum und die Uhrzeit entsprechend.
Konfigurieren Konfiguration der Netzwerkumgebung 2529-00E Wenn Sie das Gerät an ein Wired LAN oder ein Wireless LAN anschließen, müssen Sie eine für das ausgewählte Netzwerk eindeutige IP-Adresse einstellen. Wählen Sie "Wired" oder "Wireless" je nach Kommunikationsumgebung und Netzwerkgeräten aus. Informationen zu spezifischen IP-Adresseinstellungen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator.
Konfigurieren Anzeigen der MAC-Adresse und der Informationen für Wireless LAN(P. 48) ● Informationen zum Verbinden des Geräts mit einem IEEE 802.1X-Netzwerk finden Sie in Konfigurieren der IEEE 802.1X-Authentisierungseinstellungen(P. 267) . Auswählen von verkabeltem LAN oder Wireless LAN. Auswählen von verkabeltem LAN oder Wireless LAN(P. 25) Verbinden Sie das Gerät mit einem verkabelten LAN oder einem Wireless LAN. ● Fahren Sie mit dem Abschnitt zu der in Schritt 2 gewählten Einstellung fort.
Konfigurieren Auswählen von verkabeltem LAN oder Wireless LAN 2529-00F Nachdem Sie über die Verbindung (drahtgebunden oder drahtlos) des Geräts mit dem Computer entschieden haben, wählen Sie entsprechend Wired LAN oder Wireless LAN über das Bedienfeld. Beachten Sie, dass jede Änderung der Einstellung von auf oder umgekehrt eine Deinstallation der auf Ihrem Computer installierten Treiber und anschließend eine Neuinstallation dieser Treiber erforderlich macht.
Konfigurieren Herstellen einer Verbindung zu einem Wired LAN 2529-00H Verbinden Sie das Gerät über einen Router mit einem Computer. Schließen Sie das Gerät mit einem LAN-Kabel an den Router an. 1 Schließen Sie ein LAN-Kabel an. ● Schließen Sie das Gerät über ein LAN-Kabel an einen Router an. ● Schieben Sie den Stecker in die Buchse, bis er mit einem Klicken einrastet. 2 Warten Sie mehrere Minuten. ➠ Die IP-Adresse wird automatisch eingestellt. ● Sie können die IP-Adresse manuell einstellen.
Konfigurieren Herstellen einer Verbindung zu einem Wireless LAN 2529-00J Ein Wireless LAN-Router (oder Access Point) stellt die Verbindung zwischen dem Gerät und dem Computer über Funk her. Sofern der Wireless LAN-Router mit WPS (Wi-Fi Protected Setup) ausgestattet ist, können Sie das Netzwerk ganz einfach automatisch konfigurieren.
Konfigurieren ◼ Eingabe des PIN-Codes Einige WPS-Router unterstützen die Konfiguration über Tastendruck nicht. Wenn auf der Verpackung oder im Handbuch des Netzwerkgeräts die Eingabe des WPS-PIN-Codes erwähnt wird, richten Sie die Verbindung durch Eingabe des PIN-Codes ein. Konfiguration der Verbindung im Modus "WPS PIN-Code"(P. 31) ● Wenn der Wireless LAN-Router auf die Verwendung der WEP-Authentisierung eingestellt ist, können Sie die Verbindung unter Umständen nicht mit WPS konfigurieren.
Konfigurieren Konfiguration der Verbindung mit der WPS Tastendrückmethode 2529-00K Wenn der Wireless LAN-Router die Konfiguration über die WPS-Taste unterstützt, können Sie die Verbindung ganz einfach mit einem Tastendruck konfigurieren. ● Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät. 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie Bildschirm Startseite(P.
Konfigurieren 8 Warten Sie, bis die Meldung angezeigt wird. 9 Wählen Sie . ➠ Warten Sie mehrere Minuten, bis die IP-Adresse und die anderen Elemente automatisch eingestellt sind. Signalstärke ● Wenn mehr als ein Wireless LAN-Router vorhanden ist, mit dem eine Verbindung hergestellt werden kann, stellt dieses Gerät die Verbindung mit dem Router mit dem stärksten Signal her. Die Signalstärke wird mittels RSSI (Received Signal Strength Indication) gemessen.
Konfigurieren Konfiguration der Verbindung im Modus "WPS PINCode" 2529-00L Wenn der Wireless LAN-Router die Konfiguration über die Eingabe des WPS-PIN-Codes unterstützt, generieren Sie mit dem Gerät einen PIN-Code, und speichern Sie diesen im Netzwerkgerät. ● Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät.
Konfigurieren 8 Speichern Sie den generierten PIN-Code im Wireless LAN-Router. ● Registrieren Sie den PIN-Code im Konfigurationsbildschirm, der in Schritt 1 angezeigt wird. ● Sie müssen den PIN-Code innerhalb von 10 Minuten speichern, nachdem Sie in Schritt 7 gewählt haben. Wenn während der Konfiguration eine Fehlermeldung angezeigt wird ● Wählen Sie und fangen Sie wieder mit Schritt 6 an. Auf dem Bedienfeld 9 10 Warten Sie, bis die Meldung angezeigt wird.
Konfigurieren Konfiguration der Verbindung durch Auswahl eines Wireless LAN-Routers 2529-00R Sie können die Wireless LAN-Router (oder Access Points) suchen, mit denen eine Verbindung hergestellt werden kann, und einen im Display des Geräts auswählen. Geben Sie als Netzwerkschlüssel einen WEP- oder PSK-Schlüssel ein. Überprüfen und notieren Sie die für die Konfiguration benötigten Informationen, einschließlich der SSID und des Netzwerkschlüssels ( Überprüfen von SSID und Netzwerkschlüssel(P.
Konfigurieren ● Wählen Sie den Router, dessen SSID der von Ihnen notierten entspricht, und drücken Sie ( ). So zeigen Sie detaillierte Sicherheitseinstellungen am Touchpanel-Modell an ● Wählen Sie einen Wireless LAN-Router, und wählen Sie . Wählen Sie , um wieder den vorherigen Bildschirm aufzurufen. Wenn der gewünschte Wireless LAN-Router nicht gefunden wird ● Prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist.
Konfigurieren Reduzieren des Stromverbrauchs ● Sie können das Gerät so einstellen, dass es je nach den vom Wireless LAN-Router ausgegebenen Signalen in den Modus wechselt. (P. 313) Wenn sich die IP-Adresse des Geräts geändert hat ● In einer DHCP-Umgebung ändert sich die IP-Adresse des Geräts möglicherweise automatisch. In diesem Fall wird die Verbindung aufrechterhalten, solange das Gerät und der Computer zu demselben Subnet gehören.
Konfigurieren Konfiguration der Verbindung durch Festlegen detaillierter Einstellungen 2529-00S Wenn Sie detaillierte Sicherheitseinstellungen festlegen möchten oder die Wireless LAN-Verbindung anhand der anderen Verfahren nicht herstellen können, geben Sie alle für die Wireless LAN-Verbindung benötigten Informationen manuell ein.
Konfigurieren Stellt die Open-System-Authentisierung ein, die auch als "offene Authentisierung" bezeichnet wird. Verwendet den WEP-Schlüssel als Passwort. Wenn Sie ausgewählt haben ● Beim Herstellen der Verbindung zu einem Wireless LAN kommt es am Gerät zu einem Authentisierungsfehler, wenn am Wireless LAN-Router die Authentisierung über einen gemeinsamen Schlüssel eingestellt ist.
Konfigurieren Das Gerät wählt automatisch AES-CCMP oder TKIP, je nach der Einstellung am Wireless LAN-Router. Stellt AES-CCMP als Verschlüsselungsmethode ein. 3 Geben Sie den zuvor notierten Netzwerkschlüssel ein. ● Geben Sie den Netzwerkschlüssel ein, und wählen Sie . 8 Wählen Sie . Wenn während der Konfiguration eine Fehlermeldung angezeigt wird ● Wählen Sie , überprüfen Sie, ob die angegebenen Einstellungen korrekt sind, und fangen Sie wieder mit Schritt 5 an.
Konfigurieren Überprüfen von SSID und Netzwerkschlüssel 2529-00U Bei der manuellen Konfiguration einer Wireless LAN-Verbindung müssen Sie die SSID und den Netzwerkschlüssel des Wireless LAN-Routers eingeben. Die SSID und der Netzwerkschlüssel sind unter Umständen auf den verwendeten Netzwerkgeräten angegeben. Überprüfen Sie die Geräte, und notieren Sie die benötigten Informationen, bevor Sie die Verbindung konfigurieren.
Konfigurieren Einstellen von IP-Adressen 2529-00W Wenn Sie das Gerät mit einem Netzwerk verbinden, ist eine eindeutige IP-Adresse im Netzwerk erforderlich. Zwei Versionen von IP-Adressen stehen zur Verfügung: IPv4 und IPv6. Konfigurieren Sie diese Einstellungen je nach Netzwerkumgebung. Wenn Sie IPv6-Adressen verwenden möchten, müssen Sie die IPv4-Adresseinstellungen richtig konfigurieren. Einstellen der IPv4-Adresse(P. 41) Einstellen von IPv6-Adressen(P.
Konfigurieren Einstellen der IPv4-Adresse 2529-00X Die IPv4-Adresse des Geräts kann über ein Protokoll für die dynamische IPAdressierung, beispielsweise DHCP, automatisch zugewiesen oder manuell eingegeben werden. Wenn Sie das Gerät an ein verkabeltes LAN anschließen, vergewissern Sie sich, dass die Stecker des LAN-Kabels fest in den Anschlüssen sitzen ( Herstellen einer Verbindung zu einem Wired LAN(P. 26) ). Falls erforderlich, können Sie die Netzwerkverbindung testen. Einstellen der IPv4-Adresse(P.
Konfigurieren Touchpanel-Modell ● Wählen Sie unter , und wählen Sie . Schwarzweiß LCD-Modell ● Wählen Sie . Wenn Sie DHCP/BOOTP/RARP nicht für die Zuweisung einer IP-Adresse verwenden wollen ● Wählen Sie . Wenn Sie wählen und diese Dienste nicht verfügbar sind, durchsucht das Gerät das Netzwerk unnötigerweise nach diesen Diensten, was Zeit und Kommunikationsressourcen beansprucht.
Konfigurieren Wenn Sie die IP-Adresse nach Installation des Druckertreibers geändert haben ● Sie müssen einen neuen Anschluss hinzufügen. Konfigurieren von Druckerports(P. 54) Testen der Netzwerkverbindung 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie Bildschirm Startseite(P. 107) . ● Wenn der Anmeldebildschirm erscheint, geben Sie die korrekte ID und PIN ein. Gerät(P.
Konfigurieren Einstellen von IPv6-Adressen 2529-00Y Die IPv6-Adressen des Geräts können Sie über Remote UI konfigurieren. Überprüfen Sie die IPv4-Adresseinstellungen ( Anzeigen von IPv4-Einstellungen(P. 47) ), bevor Sie IPv6-Adressen einstellen. Sie müssen die richtigen IPv4-Einstellungen festlegen, wenn Sie IPv6-Adressen verwenden wollen.
Konfigurieren [IPv6 verwenden] Aktivieren Sie das Kontrollkästchen, um IPv6 am Gerät zu aktivieren. Wenn Sie IPv6 nicht verwenden, deaktivieren Sie das Kontrollkästchen. [Zustandslose Adresse 1] Aktivieren Sie das Kontrollkästchen, wenn Sie eine zustandslose Adresse verwenden. Wenn Sie keine zustandslose Adresse verwenden, deaktivieren Sie das Kontrollkästchen.
Konfigurieren Überprüfen Sie, ob die Einstellungen korrekt sind. ● Vergewissern Sie sich, dass am Computer der Remote UI-Bildschirm angezeigt werden kann, indem Sie die IPv6-Adresse des Geräts verwenden. Starten von Remote UI(P. 278) Auswählen von Einstellungen über das Bedienfeld ● Sie können auch über auf dem Bildschirm auf die IPv6-Einstellungen zugreifen. // (Touchpanel-Modell)(P.
Konfigurieren Anzeigen von Netzwerkeinstellungen 2529-010 Anzeigen von IPv4-Einstellungen(P. 47) Anzeigen von IPv6-Einstellungen(P. 47) Anzeigen der MAC-Adresse für WLAN(P. 47) Anzeigen der MAC-Adresse und der Informationen für Wireless LAN(P. 48) ● Wenn "0.0.0.0" als IP-Adresse angezeigt wird, ist sie nicht korrekt konfiguriert. ● Wenn Sie das Gerät an einen Switching-Hub oder eine Bridge anschließen, kann es auch bei einer korrekt konfigurierten IP-Adresse zu einem Kommunikationsfehler kommen.
Konfigurieren Anzeigen der MAC-Adresse und der Informationen für Wireless LAN 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie Bildschirm Startseite(P. 107) . ● Wenn der Anmeldebildschirm erscheint, geben Sie die korrekte ID und PIN ein. Gerät(P. 123) Anmelden am 3 Wählen Sie . 4 Lesen Sie die angezeigte Meldung, und wählen Sie . 5 Wählen Sie / .
Konfigurieren Herstellen einer Verbindung zu einem Wireless LAN(P. 27) Einstellen der IPv4-Adresse(P. 41) Einstellen von IPv6-Adressen(P. 44) Konfigurieren von DNS(P.
Konfigurieren Konfigurieren von Einstellungen für die Kommunikation mit einem Computer 2529-011 Geben Sie das Protokoll und den Port an, wenn Sie das Gerät von einem Computer über das Netzwerk betreiben. Führen Sie die grundlegenden Konfigurationsschritte aus, bevor Sie das Gerät für das Drucken von einem Computer konfigurieren. Weitere Informationen finden Sie in den Anleitungen der entsprechenden Treiber auf der Website der Online-Anleitung. Konfigurieren von Druckprotokollen und WSD-Funktionen(P.
Konfigurieren Konfigurieren von Druckprotokollen und WSDFunktionen 2529-012 Konfigurieren Sie die Protokolle für das Drucken von Dokumenten von einem Computer im Netzwerk. ● Weitere Informationen über die Grundfunktionen, die bei der Konfiguration des Geräts über die Remote UI auszuführen sind, finden Sie unter Einstellen von Menüoptionen über Remote UI(P. 286) . 1 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI(P.
Konfigurieren Legen Sie einen Wert als Neustartwartezeit für den Datenempfang fest. Wenn der Datenempfang nach der festgelegten Zeit nicht fortgesetzt wird, wird der Druckvorgang abgebrochen. 3 Klicken Sie auf [OK]. Konfigurieren von WSD 1 Wählen Sie [Einstellungen WSD] 2 Konfigurieren Sie die Einstellungen nach Bedarf. [Bearbeiten]. [WSD-Drucken verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie über WSD drucken wollen.
Konfigurieren für das WSD-Netzwerk finden Sie in den Anleitungen der entsprechenden Treiber auf der Website der Online-Handbücher. So ändern Sie die Portnummer ● Sie müssen die gleiche Portnummer, die Sie am Gerät und Computer verwendet haben, für das Druckprotokoll verwenden. Konfigurieren von Druckerports(P. 54) Ändern von Portnummern(P. 246) LINKS Konfigurieren von Druckerports(P.
Konfigurieren Konfigurieren von Druckerports 2529-013 Es kann zu Fehlern beim Drucken kommen, wenn sich die IP-Adresse des Geräts geändert hat oder wenn über den Windows-Druckerordner ein Drucker hinzugefügt wurde. Diese Fehler sind normalerweise auf fehlerhafte Druckerporteinstellungen zurückzuführen. Eventuell wurde eine falsche Portnummer oder ein falscher Porttyp angegeben. In solchen Fällen schlägt das Drucken fehl, weil die Dokumentendaten nicht an das Gerät übertragen werden können.
Konfigurieren ● Wenn der nächste Bildschirm angezeigt wird, befolgen Sie die Anweisungen auf dem Bildschirm. * Wenn Sie den [Gerätetyp] wählen, wählen Sie [Canon Network Printing Device with P9100] unter [Standard]. 5 Klicken Sie auf [Fertigstellen]. 6 Klicken Sie auf [Schließen]. Ändern des Porttyps oder der Portnummer Wenn auf der Geräteseite das Druckprotokoll (LPD oder RAW) ( Konfigurieren von Druckprotokollen und WSD-Funktionen(P. 51) ) oder die Portnummer ( Ändern von Portnummern(P.
Konfigurieren LINKS Konfigurieren eines Druckservers(P.
Konfigurieren Konfigurieren eines Druckservers 2529-014 Mit einem Druckserver können Sie die Belastung des Computers, von dem Sie drucken, reduzieren. Der Druckserver macht es auch möglich, die Treiber auf jedem Computer über das Netzwerk zu installieren, was Ihnen die Mühe erspart, die Treiber auf jedem Computer mithilfe der mitgelieferten DVD-ROM zu installieren. Um einen Computer im Netzwerk als Druckserver einzurichten, konfigurieren Sie die Einstellungen für die Freigabe des Druckers.
Konfigurieren ● Dieser Schritt ist erforderlich, wenn Sie die Treiber über den Druckserver auf anderen Computern mit einer anderen Systemarchitektur installieren möchten. 1 Klicken Sie auf [Zusätzliche Treiber]. 2 Aktivieren Sie das Kontrollkästchen für die verwendete Systemarchitektur der anderen Computer, und klicken Sie auf [OK]. ● Wählen Sie unter den folgenden weitere Treiber entsprechend dem Betriebssystem des Druckservers aus.
Konfigurieren 2 Doppelklicken Sie auf den freigegebenen Drucker. 3 Installieren Sie die Treiber nach den Bildschirmanweisungen. LINKS Drucken von einem Computer(P.
Konfigurieren Konfigurieren des Geräts für die Netzwerkumgebung 2529-015 Die Konfiguration eines Netzwerks hängt von seinem Verwendungszweck ab. Das Gerät ist auf Kompatibilität mit möglichst vielen Netzwerkkonfigurationen ausgelegt und mit einer Vielzahl von Technologien ausgestattet. Konfigurieren Sie das Gerät in Absprache mit Ihrem Netzwerkadministrator je nach Netzwerkkonfiguration. Konfigurieren von Etherneteinstellungen(P. 61) Ändern der maximalen Übertragungseinheit(P.
Konfigurieren Konfigurieren von Etherneteinstellungen 2529-016 Ethernet ist ein Standard für die Übertragung von Daten in einem lokalen Netzwerk (LAN). Sie können den Kommunikationsmodus bzw. den Ethernettyp einstellen. Üblicherweise können Sie das Gerät ohne Änderungen an den Standardwerten ( (P. 327) ) verwenden, Sie können die Einstellungen bei Bedarf aber auch an die Netzwerkumgebung anpassen. 1 Wählen Sie auf dem Bildschirm Startseite.
Konfigurieren Daten können nur abwechselnd gesendet und empfangen werden. Wählen Sie diese Einstellung, wenn das Gerät mit einem Netzwerkgerät verbunden ist, das im Halbduplexmodus arbeitet. Daten können gleichzeitig gesendet und empfangen werden. In den meisten Umgebungen verwenden Sie diese Einstellung. 3 4 Wählen Sie . 5 Wählen Sie den Ethernettyp. Starten Sie das Gerät neu.
Konfigurieren Ändern der maximalen Übertragungseinheit 2529-017 In den meisten Ethernetnetzwerken können Pakete mit einer Größe von maximal 1.500 Byte gesendet werden. Ein Paket ist hierbei eine Dateneinheit, in die die Originaldaten vor dem Senden unterteilt werden. Die maximale Übertragungseinheit (MTU, Maximum Transmission Unit) kann je nach Netzwerk variieren. Ändern Sie die Einstellung am Gerät nach Bedarf. Weitere Informationen erhalten Sie bei Ihrem Netzwerkadministrator.
Konfigurieren Einstellen einer Wartezeit für die Netzwerkverbindung 2529-018 In einem Netzwerk, in dem dank mehrerer Switching-Hubs oder Bridges redundante Verbindungen genutzt werden können, wird ein Mechanismus benötigt, der Übertragungsschleifen beim Übermitteln von Paketen verhindert. Eine wirksame Lösung besteht darin, die Rolle jedes Switchports zu definieren.
Konfigurieren Konfigurieren von DNS 2529-019 DNS (Domain Name System) bietet einen Dienst für die Namensauflösung zur Zuordnung von Host- oder Domänennamen zu IP-Adressen. Konfigurieren Sie die DNS-, mDNS- oder DHCP-Einstellungen nach Bedarf. Beachten Sie, dass sich das Vorgehen beim Konfigurieren von DNS bei IPv4 und IPv6 unterscheidet.
Konfigurieren [Einstellungen DHCP-Option] [Hostnamen erfassen] Aktivieren Sie das Kontrollkästchen, um Option 12 zu aktivieren und den Hostnamen vom DHCPServer abzurufen. [DNS Dynamisches Update] Aktivieren Sie das Kontrollkästchen, um Option 81 zu aktivieren und die DNS-Datensätze über den DHCP-Server dynamisch zu aktualisieren. [DNS-Serveradresse erfassen] Aktivieren Sie das Kontrollkästchen, um Option 6 zu aktivieren und eine DNS-Serveradresse vom DHCP-Server abzurufen.
Konfigurieren Intervall erfolgen sollen, geben Sie dieses in Stunden in das Textfeld [Intervall DNS Dynamisches Update] ein. [Einstellungen mDNS] [mDNS verwenden] Das von Bonjour implementierte mDNS (Multicast-DNS) ist ein Protokoll zur Zuordnung von Hostnamen zu IP-Adressen ohne DNS. Aktivieren Sie das Kontrollkästchen, um mDNS zu aktivieren, und geben Sie den mDNS-Namen in das Textfeld [Name mDNS] ein. 3 Klicken Sie auf [OK].
Konfigurieren Aktivieren Sie das Kontrollkästchen, um denselben Host- und Domänennamen wie bei IPv4 zu verwenden. [Hostname] Geben Sie alphanumerische Zeichen für den Hostnamen des Geräts ein, der beim DNS-Server registriert werden soll. [Domänenname] Geben Sie alphanumerische Zeichen für den Namen der Domäne ein, zu der das Gerät gehört, wie beispielsweise "beispiel.de.
Konfigurieren Konfigurieren von SMB 2529-01A SMB (Server Message Block) (SMB) ist ein Protokoll für die Freigabe von Ressourcen wie Dateien und Drucker unter mehreren Geräten in einem Netzwerk. Sie müssen es verwenden, um das Gerät als einen freigegebenen Drucker in einem SMB-Netzwerk konfigurieren zu können. Je nach Netzwerk müssen Sie eventuell den NetBIOS- und den Workgroup-Namen einstellen.
Konfigurieren [Name NetBIOS] Geben Sie alphanumerische Zeichen für den NetBIOS-Namen des Geräts ein. [Name Arbeitsgruppe] Geben Sie alphanumerische Zeichen für den Namen der Workgroup ein, zu der das Gerät gehört. ● NetBIOS- oder Workgroup-Namen, die mit einem Stern (*) anfangen, können bei einem WINS-Server nicht registriert werden. 6 Klicken Sie auf [OK]. 7 Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
Konfigurieren Konfigurieren von WINS 2529-01C WINS (Windows Internet Name Service) ermöglicht als Dienst für die Namensauflösung die Zuordnung von NetBIOSNamen (Computer- oder Druckername in einem SMB-Netzwerk) zu IP-Adressen. Wenn Sie WINS aktivieren möchten, müssen Sie den WINS-Server angeben. ● Damit Sie WINS-Servereinstellungen angeben können, müssen der NetBIOS- und der Workgroup-Name eingestellt werden. Konfigurieren von SMB(P. 69) ● Diese Funktion steht in IPv6-Netzwerken nicht zur Verfügung.
Konfigurieren Geben Sie die IP-Adresse des WINS-Servers ein. ● Wenn die IP-Adresse des WINS-Servers von einem DHCP-Server abgerufen wird, hat die abgerufene IPAdresse Vorrang vor der in das Textfeld [WINS-Serveradresse] eingegebenen IP-Adresse. 6 Klicken Sie auf [OK]. 7 Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
Konfigurieren Überwachen und Steuern des Geräts mit SNMP 2529-01E SNMP (Simple Network Management Protocol) ist ein Protokoll zum Überwachen und Steuern von Kommunikationsgeräten in einem Netzwerk über die MIB (Management Information Base). Das Gerät unterstützt SNMPv1 und das mit Sicherheitsmechanismen ausgestattete SNMPv3. Sie können den Status des Geräts von einem Computer aus anzeigen, wenn Sie Dokumente drucken oder Remote UI verwenden.
Konfigurieren 4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie die SNMPv1-Einstellungen fest. ● Wenn Sie die SNMPv1-Einstellungen nicht ändern müssen, fahren Sie mit dem nächsten Schritt fort. [SNMPv1 verwenden] Aktivieren Sie das Kontrollkästchen, um SNMPv1 zu aktivieren. Sie können die übrigen SNMPv1-Einstellungen nur festlegen, wenn das Kontrollkästchen aktiviert ist.
Konfigurieren [SNMPv3 verwenden] Aktivieren Sie das Kontrollkästchen, um SNMPv3 zu aktivieren. Sie können die übrigen SNMPv3-Einstellungen nur festlegen, wenn das Kontrollkästchen aktiviert ist. [Anwender aktivieren] Aktivieren Sie das Kontrollkästchen, um [Anwendereinstellungen 1]/[Anwendereinstellungen 2]/ [Anwendereinstellungen 3] zu aktivieren. Zum Deaktivieren von Anwendereinstellungen deaktivieren Sie das entsprechende Kontrollkästchen.
Konfigurieren 7 Legen Sie die Einstellungen für das Erfassen von Druckerverwaltungsinformationen fest. ● Mit SNMP können die Druckerverwaltungsinformationen wie Druckprotokolle und Druckerports regelmäßig von einem Computer im Netzwerk abgerufen und überwacht werden. [Druckerverwaltungsinformationen vom Host erfassen] Aktivieren Sie das Kontrollkästchen, um die Überwachung der Druckerverwaltungsinformationen des Geräts über SNMP zu aktivieren.
Konfigurieren Sonstige Netzwerkeinstellungen 2529-01F Ändern Sie die folgenden Optionen je nach der Netzwerkumgebung. Konfigurieren von SNTP(P. 77) Überwachen des Geräts von den Geräteverwaltungssystemen(P. 78) Konfigurieren von SNTP SNTP (Simple Network Time Protocol) ermöglicht die Einstellung der Systemuhr über einen Zeitserver im Netzwerk. Wenn Sie SNTP verwenden, überprüft das System den Zeitserver regelmäßig und sorgt auf diese Weise für eine stets genaue Systemzeit.
Konfigurieren Aktivieren Sie das Kontrollkästchen, um SNTP für die Synchronisation zu verwenden. Wenn Sie SNTP nicht verwenden, deaktivieren Sie das Kontrollkästchen. [NTP-Servername] Geben Sie die IP-Adresse des NTP- oder SNTP-Servers ein. Wenn DNS im Netzwerk verfügbar ist, können Sie stattdessen einen Hostnamen (oder FQDN) eingeben, der aus alphanumerischen Zeichen besteht (Beispiel: ntp.example.com). [Abruf-Intervall] Legen Sie das Intervall zwischen den Synchronisationsvorgängen fest.
Konfigurieren /(P. 326) Überwachen und Steuern des Geräts mit SNMP(P. 73) Remote UI-Funktionen ● Weitere Informationen über die Grundfunktionen, die bei der Konfiguration des Geräts über die Remote UI auszuführen sind, finden Sie unter Einstellen von Menüoptionen über Remote UI(P. 286) . ◼ Konfigurieren der SLP-Kommunikation mit Geräteverwaltungssoftware 1 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. von Remote UI(P.
Konfigurieren 3 Klicken Sie auf [OK]. Benachrichtigen von Geräteverwaltungssoftware über den Stromversorgungsstatus des Geräts 1 Wählen Sie [Benachrichtigungseinstellungen Schlafmodus] 2 Aktivieren Sie das Kontrollkästchen [Benachrichtigen], und legen Sie die erforderlichen Einstellungen fest. [Bearbeiten]. [Benachrichtigen] Aktivieren Sie das Kontrollkästchen, wenn eine Geräteverwaltungssoftware über den Stromversorgungsstatus des Geräts benachrichtigt werden soll.
Konfigurieren Installieren der Treiber 2529-01H Installieren Sie die verschiedenen Treiber und die zugehörige Software auf Ihrem Computer. 1 Führen Sie die notwendige Vorbereitung durch, bevor Sie mit der Installation fortfahren. ● Installieren Sie zuvor die optionalen Geräte an der Haupteinheit. Optionale Ausstattung(P. 548) ● Wenn sich im Lieferumfang des Geräts eine DVD-ROM befindet, legen Sie die DVD-ROM in das Laufwerk des Computers ein.
Grundfunktionen Grundfunktionen Grundfunktionen ............................................................................................................................................. 84 Teile und ihre Funktionen ................................................................................................................................... 87 Vorderseite .................................................................................................................................................
Grundfunktionen Einstellen von Tönen ......................................................................................................................................... 163 Wechseln in den Schlafmodus ..........................................................................................................................
Grundfunktionen Grundfunktionen 2529-01J In diesem Kapitel werden die häufig ausgeführten Grundfunktionen wie beispielsweise die Verwendung des Bedienfelds oder das Einlegen von Papier beschrieben. ◼ Teile und ihre Funktionen In diesem Abschnitt werden die äußeren und inneren Bauteile des Geräts und ihre Funktionen sowie die Tasten auf dem Bedienfeld und die Anzeigen im Display erläutert. Teile und ihre Funktionen(P.
Grundfunktionen ◼ Einlegen von Papier In diesem Abschnitt wird beschrieben, wie Sie Papier in die Papierkassette und das Mehrzweckfach einlegen. Einlegen von Papier(P. 124) ◼ Anpassen des Displays In diesem Abschnitt wird beschrieben, wie Sie angezeigte Elemente neu anordnen können, damit Sie es einfacher haben, die im Display angezeigten Bildschirme zu verwenden. Anpassen des Displays(P.
Grundfunktionen ◼ Einstellen von Tönen In diesem Abschnitt wird beschrieben, wie Sie die Lautstärke für verschiedene Signaltöne des Geräts, beispielsweise bei Fehlern, einstellen. Einstellen von Tönen(P. 163) ◼ Wechseln in den Schlafmodus In diesem Abschnitt wird das Einstellen des Schlafmodus beschrieben. 86 Wechseln in den Schlafmodus(P.
Grundfunktionen Teile und ihre Funktionen 2529-01K In diesem Abschnitt werden die Teile des Geräts (außen an der Vorder- und Rückseite sowie innen) und ihre Funktionsweise beschrieben. Neben den bei Grundfunktionen wie dem Einlegen von Papier und dem Austauschen der Tonerpatronen wichtigen Teilen werden dabei auch die Tasten auf dem Bedienfeld und die Anzeigen im Display erläutert. Außerdem finden Sie in diesem Abschnitt Tipps zum ordnungsgemäßen Gebrauch des Geräts. Vorderseite(P. 88) Rückseite(P.
Grundfunktionen Vorderseite 2529-01L Ausgabefach Bedrucktes Papier wird am Ausgabefach ausgegeben. USB-Anschluss (für USB-Geräteanschluss) Schließen Sie an diesen Anschluss ein USB-Speichergerät oder eine USB-Tastatur eines Drittanbieters an. Durch den Anschluss eines USB-Speichergeräts können Sie Daten vom Speichergerät drucken. Setzen Sie ein USB-Speichergerät ein(P. 90) Drucken von einem USB-Speichergerät (Speichermedium Druck)(P.
Grundfunktionen Papierkassette Legen Sie den Papiertyp, den Sie häufig verwenden, in die Papierkassette ein. Papierkassette(P. 127) Einlegen von Papier in die Mehrzweckfach / Manuelle Zufuhr Legen Sie das Papier in das Mehrzweckfach ein, wenn Sie vorübergehend einen anderen als den in die Papierkassette eingelegten Papiertyp verwenden wollen. Einlegen von Papier in das Mehrzweckfach(P.
Grundfunktionen Setzen Sie ein USB-Speichergerät ein 2529-01R Setzen Sie ein USB-Speichergerät in den USB-Anschluss auf der Vorderseite des Geräts ein. Sie können die Daten von einem USB-Speicher direkt drucken. Bevor Sie ein USB-Speichergerät verwenden ● Die unterstützten Formate des USB-Speichergeräts sind FAT16 und FAT32. ● Es ist erforderlich auf zu setzen. Speichermedium>(P.
Grundfunktionen ◼ Entfernen Sie das USB-Speichergerät vom Gerät. ● Gehen Sie immer wie folgt vor, wenn Sie USB-Speichergeräte entfernen. Wenn Sie andere Methoden zum Entfernen der USB-Speichergeräte anwenden, können das Speichergerät und das Gerät beschädigt werden. Touchpanel-Modell 1 Wählen Sie . 2 Wählen Sie . ➠ Warten Sie, bis die Meldung angezeigt wird. 3 Trennen Sie das USB-Speichergerät vom Gerät.
Grundfunktionen Rückseite 2529-01S Hintere Abdeckung Öffnen Sie die hintere Abdeckung zum Beheben von Papierstaus. Beheben von Papierstaus(P. 511) Typenschild Dieser Aufkleber enthält die Seriennummer, die Sie bei Fragen zum Gerät angeben müssen. Problem nicht beheben lässt(P. 521) Wenn sich ein Netzeingang Schließen Sie hier das Netzkabel an. USB-Anschluss (für USB-Geräteanschluss) Schließen Sie an diesen Anschluss Geräte wie eine USB-Tastatur eines Drittanbieters an.
Grundfunktionen Innen 2529-01U Tonerpatronenfach Setzen Sie die Tonerpatronen Y (Gelb), M (Magenta), C (Cyan) und K (Schwarz) der Reihe nach von hinten nach vorne in die Vertiefungen ein. Schritte für das Austauschen der Tonerpatrone(P. 441) LINKS Austausch der Tonerpatrone(P.
Grundfunktionen Mehrzweckfach 2529-01W LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Papierführungen Stellen Sie die Papierführungen genau auf die Breite des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Für LBP654Cx / LBP653Cdw ● Drücken Sie den in der Abbildung mit einem Pfeil markierten Entriegelungshebel, um die Sperre aufzuheben, und verschieben Sie die Papierführungen. Papierfach Ziehen Sie beim Einlegen von Papier das Papierfach heraus.
Grundfunktionen Papierkassette 2529-01X LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Papierführungen Stellen Sie die Papierführungen genau auf das Format des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Drücken Sie die in den Abbildungen mit einem Pfeil markierten Entriegelungshebel, um die Sperre aufzuheben, und verschieben Sie die Papierführungen.
Grundfunktionen LINKS Einlegen von Papier in die Papierkassette(P.
Grundfunktionen Bedienfeld 2529-01Y Bedienfeld Touchpanel-Modell(P. 97) Bedienfeld von Schwarzweiß LCD-Modell(P. 98) Bedienfeld Touchpanel-Modell ● Der Winkel des Bedienfelds kann angepasst werden. Passen Sie ihn auf einen Winkel an, der für das Betrachten des Bedienfelds am angenehmsten ist. Einstellen des Winkels(P. 98) Display Sie können den Fortschritt des Geräts sowie den Fehlerstatus anzeigen.
Grundfunktionen Fehleranzeige Blinkt oder leuchtet, wenn Probleme wie beispielsweise Papierstaus auftreten. Taste Startseite Durch Drücken dieser Taste zeigen Sie den Bildschirm Startseite an, über den Sie Zugriff auf das Einstellungsmenü und auf Funktionen wie Speichermedium Druck und Geschützter Druck erhalten. Bildschirm Startseite(P. 107) Anpassen des Bildschirms Startseite(P. 160) Taste Stopp Mit dieser Taste brechen Sie das Drucken und andere Funktionen ab.
Grundfunktionen Taste Startseite Durch Drücken dieser Taste zeigen Sie den Bildschirm Startseite an, über den Sie Zugriff auf das Einstellungsmenü und auf Funktionen wie Speichermedium Druck und Geschützter Druck erhalten. Bildschirm Startseite(P. 107) Taste Zurück Mit dieser Taste gelangen Sie wieder zum vorherigen Bildschirm. Wenn Sie diese Taste beispielsweise beim Vornehmen von Einstellungen drücken, werden die Einstellungen nicht angewendet, und der vorherige Bildschirm wird wieder angezeigt.
Grundfunktionen Taste [#] Mit dieser Taste geben Sie Sonderzeichen wie "@" oder "/" ein. Taste [ ] Wenn Sie Einstellungen vornehmen, gelangen Sie mit dieser Taste wieder zum vorherigen Bildschirm. Wenn Sie Zahlen eingeben, drücken Sie diese Taste, um den Cursor nach links zu bewegen. Taste [ ] Wenn Sie Einstellungen vornehmen, wählen Sie mit dieser Taste die Option direkt über der zurzeit ausgewählten Option. Wenn Einstellwerte geändert werden, drücken Sie diese Taste zum Erhöhen eines Wertes.
Grundfunktionen Einschalten des Geräts 2529-020 In diesem Abschnitt wird das Einschalten des Geräts beschrieben. 1 Prüfen Sie, ob der Netzstecker fest an eine Netzsteckdose angeschlossen ist. 2 Drücken Sie den Netzschalter. ➠ Der Startbildschirm wird eingeblendet. Bedienfeld(P. 97) ● Sie können den Bildschirm wählen, der zuerst angezeigt wird, nachdem das Gerät eingeschaltet wird. (P. 300) LINKS Ausschalten des Geräts(P.
Grundfunktionen Ausschalten des Geräts 2529-021 In diesem Abschnitt wird das Ausschalten des Geräts beschrieben. 1 Drücken Sie den Netzschalter. ● Es kann eine Weile dauern, bis das Gerät vollständig abgeschaltet hat. Ziehen Sie das Netzkabel erst ab, nachdem das Display abgeschaltet hat. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
Grundfunktionen Ausschalten der Stromversorgung zu einem bestimmten Zeitpunkt 2529-022 Sie können eine Einstellung vornehmen, um die Stromversorgung zu einer bestimmten Tages- oder Wochenzeit automatisch auszuschalten. Auf diese Weise können Sie nutzlosen Stromverbrauch vermeiden, wenn vergessen wird, die Stromversorgung des Geräts auszuschalten. Diese Funktion ist standardmäßig deaktiviert.
Grundfunktionen Durch die Aktivierung des Kontrollkästchens können Sie die Zeit zum Ausschalten der Stromversorgung an jedem Wochentag einstellen. [Sonntag] bis [Samstag] Geben Sie die gewünschte Zeit zum Ausschalten der Stromversorgung ein. Wird das Zeitfeld bei einem der Wochentage leer gelassen, bedeutet es, dass die automatische Abschaltfunktion für diesen Tag deaktiviert ist. 5 Klicken Sie auf [OK].
Grundfunktionen Verwenden des Bedienfelds 2529-023 Sie können das Display und die Tasten auf dem Bedienfeld verwenden, um die Geräteeinstellungen oder die Bedienung von Funktionen zu konfigurieren. In diesem Abschnitt wird die grundlegende Handhabung des Displays und der Tasten beschrieben. Basisbildschirme(P. 106) Grundfunktionen(P. 114) Eingeben von Text(P. 119) ● Wenn Sie die hellen und dunklen Bildbereiche des Displays umkehren möchten: Bildschirmfarben>(P.
Grundfunktionen Basisbildschirme 2529-024 Der Bildschirm Startseite oder der Einstellungsbildschirm erscheinen im Display, so dass Sie Funktionen wie beispielsweise Speichermedium Druck oder Geschützter Druck initiieren können. Sie können im Display auch Informationen überprüfen, wie beispielsweise Fehlermeldungen oder der Betriebsstatus des Geräts. Berühren Sie das Display direkt, um das Touchpanel-Modell zu bedienen. Bildschirm Startseite(P. 107) Bildschirm (P. 110) Meldungsanzeige(P.
Grundfunktionen Bildschirm Startseite 2529-025 Der Bildschirm wird angezeigt, wenn der Strom eingeschaltet wird oder wenn Sie auf dem Bedienfeld drücken. Geben Sie auf diesem Bildschirm Einstellungen an und speichern Sie Funktionen. Startseite Bildschirm des Touchpanel-Modell(P. 107) Startseite Bildschirm des Schwarzweiß LCD-Modell(P. 109) Startseite Bildschirm des Touchpanel-Modell Seite wechseln Zeigen Sie mit dieser Schaltfläche eine andere Seite auf dem Bildschirm Startseite an.
Grundfunktionen Druckt die auf einem USB-Speichermedium gespeicherten Dateien. Drucken von einem USB-Speichergerät (Speichermedium Druck)(P. 180) Mit dieser Funktion können Sie ein geschütztes Dokument drucken. Ein durch eine PIN geschütztes Dokument drucken (Geschützter Druck)(P. 176) , und viele andere Geräteeinstellungen beginnen mit dieser Schaltfläche. Liste der Menüeinstellungen(P. 298)
Grundfunktionen Startseite Bildschirm des Schwarzweiß LCD-Modell Wi-Fi Symbol Dieses Symbol wird angezeigt, wenn das Gerät mit einem Wireless LAN verbunden ist. Menge des in den Tonerpatronen verbliebenen Toners Zeigt stufenweise die Menge des in den Tonerpatronen verbliebenen Toners an. Diese Anzeige ist ausgeblendet, wenn der Startbildschirm aktiv ist. , und viele andere Geräteeinstellungen beginnen mit dieser Schaltfläche. Liste der Menüeinstellungen(P.
Grundfunktionen Bildschirm 2529-026 ) drücken, wird ein Bildschirm angezeigt, auf dem Sie den Fortschritt der Wenn Sie ( Dokumentenverarbeitung sowie den Status des Geräts (die Menge des in der Tonerpatrone verbliebenen Toners usw.) und die Netzwerkeinstellungen, wie beispielsweise die IP-Adresse des Geräts, überprüfen können. Bildschirm des Touchpanel-Modell(P. 110) Bildschirm des Schwarzweiß LCD-Modell(P.
Grundfunktionen Zeigt die Seriennummer des Geräts an. Status und Protokolle der gedruckten und empfangenen Dokumente Zeigt den aktuellen Status des ausgewählten Auftrags an. Im Folgenden sehen Sie als Beispiel den Bildschirm . Diese Option zeigt die Netzwerkeinstellungen, wie die IP-Adresse des Geräts und den Status, wie den Zustand der Wireless LAN-Kommunikation, an. Anzeigen von Netzwerkeinstellungen(P. 47)
Grundfunktionen Zeigt an, ob Papier in die einzelnen Papierquellen eingelegt ist. Zeigt die Menge des in den Tonerpatronen verbliebenen Toners an. Andere interne Teile können das Ende ihrer Nutzungsdauer erreichen, bevor der Toner verbraucht ist. Damit können Sie ein USB-Speichergerät sicher entfernen. Das wird nur angezeigt, wenn ein USBSpeichergerät an das Gerät angeschlossen wird. Entfernen Sie das USB-Speichergerät vom Gerät. (P.
Grundfunktionen Meldungsanzeige 2529-027 Meldungen werden am Bildschirm angezeigt, wenn beispielsweise das Papier ausgeht oder die Tonerpatrone das Ende ihrer Nutzungsdauer erreicht. Gegenmaßnahmen für die jeweilige Meldung(P. 490) Touchpanel-Modell Schwarzweiß LCD-Modell Wenn ein Fehler auftritt In manchen Fällen werden bei einem Problem Anweisungen angezeigt, wie auf das Problem reagiert werden soll. Befolgen Sie zum Beheben des Problems die Bildschirmanweisungen.
Grundfunktionen Grundfunktionen 2529-028 Grundfunktionen von Touchpanel-Modell(P. 114) Grundfunktionen von Schwarzweiß LCD-Modell(P. 116) Grundfunktionen von Touchpanel-Modell Bei dem Display handelt es sich um ein Touchpanel, bei dem die Bedienung direkt auf dem Bildschirm erfolgt. Vermeiden Sie die folgenden Aktionen. ● Das Display funktioniert möglicherweise nicht mehr korrekt oder wird beschädigt. - Festes Drücken - Drücken mit spitzen Gegenständen (Fingernagel, Kugelschreiber, Bleistift usw.
Grundfunktionen ◼ Auswählen von Elementen Tippen Sie auf einen Elementnamen oder eine Schaltfläche, um eine Auswahl zu treffen. Wenn ein Element versehentlich berührt wird ● Schieben Sie Ihren Finger weg, und lassen Sie ihn dann vom Bildschirm los, um die Auswahl abzubrechen. So kehren Sie zum vorherigen Bildschirm zurück ● Drücken Sie , um zum vorherigen Bildschirm zurückzukehren.
Grundfunktionen ◼ Ändern des Einstellwertes Tippen Sie auf <+> / <->, um die Einstellung auf der Skala anzupassen. Sie können eine Einstellung auch anpassen, indem Sie den Schieberegler nach links oder rechts wischen. ● Sie können eine Vielzahl von Einstellungen für die Anzeige auf dem Bildschirm vornehmen, beispielsweise die Anzeigesprache: (P.
Grundfunktionen Ändern von Einstellungswerten / zur Eingabe von Werten. Wenn auf dem Bildschirm oben links ein Symbol wie das Verwenden Sie unten dargestellte angezeigt wird, können Sie Werte direkt über die Zahlentasten eingeben. Eingeben von Text(P. 119) ● Werte, die in ( ) unter dem Eingabefeld angezeigt werden, geben den Wertebereich an, der eingegeben werden kann.
Grundfunktionen Verwenden der Zahlentasten Geben Sie Text und Werte über die Zahlentasten ein. Eingeben von Text(P. 119) ● Sie können eine Vielzahl von Einstellungen für die Anzeige auf dem Bildschirm vornehmen, beispielsweise die Anzeigesprache: (P. 300) ● Informationen zum Wechseln des Bildschirms, der automatisch angezeigt wird, wenn am Gerät eine bestimmte Zeit lang keine Funktion ausgeführt wurde: (P.
Grundfunktionen Eingeben von Text 2529-029 Eingabe von Text am Touchpanel-Modell(P. 119) Eingabe von Text am Schwarzweiß LCD-Modell(P. 120) Eingeben von Zeichen über eine USB-Tastatur(P. 122) Eingabe von Text am Touchpanel-Modell Verwenden Sie zur Eingabe von Text oder einer Zahl die am Bildschirm angezeigte Tastatur. Die Zahlentasten werden nur für die Eingabe von Zahlen am Bildschirm angezeigt. Wechseln des Zeichentyps Tippen Sie auf oder <1/#>, um den eingegebenen Zeichentyp zu wechseln.
Grundfunktionen Wertebereich ● Werte, die im Eingabefeld in ( ) angezeigt werden, kennzeichnen den Wertebereich, der eingegeben werden kann. Wenn andere Tasten als die Zahlentasten angezeigt werden ● Wenn <+>/<-> oder / angezeigt werden, können Sie auf die Schaltflächen tippen und den Zahlenwert erhöhen bzw. verringern oder den Cursor verschieben. Eingabe von Text am Schwarzweiß LCD-Modell Geben Sie Text und Werte über die Zahlentasten ein.
Grundfunktionen Typen von Zeichen, die eingegeben werden können Der Text, der eingegeben werden kann, ist im Folgenden aufgeführt. Taste A a @.-_/ 12 1 AÄBC aäbc 2 DEF def 3 GHI ghi 4 JKL jkl 5 MNOÖ mnoö 6 PQRSß pqrs 7 TUÜV tuüv 8 WXYZ wxyz 9 (Nicht verfügbar) 0 (Leerzeichen) -.
Grundfunktionen 7 Drücken Sie so oft, bis der Buchstabe "n" ausgewählt ist. 8 Drücken Sie so oft, bis das Sonderzeichen "-" ausgewählt ist. 9 Drücken Sie so oft, bis <12> ausgewählt ist. 10 Drücken Sie . 11 Wählen Sie , und drücken Sie . Eingeben von Zeichen über eine USB-Tastatur Sie können eine Tastatur an den USB-Anschluss für USB-Geräte auf der Vorderseite(P. 88) oder Rückseite(P. 92) anschließen und einen Text über die Tastatur eingeben.
Grundfunktionen Anmelden am Gerät 2529-02A Wenn die Verwaltung per Abteilungs-ID oder die Systemmanager-IDs aktiviert sind, müssen Sie sich vor Verwendung des Geräts anmelden. Wenn der Anmeldebildschirm angezeigt wird, gehen Sie folgendermaßen vor, um die Abteilungs-ID und PIN einzugeben. 1 Geben Sie die ID ein. 1 Wählen Sie oder . 2 Geben Sie die ID ein. ● Wenn keine PIN gespeichert wurde, fahren Sie mit Schritt 3 fort. 2 Geben Sie die PIN ein.
Grundfunktionen Einlegen von Papier 2529-02C Sie können das Papier in die Papierkassette oder das Mehrzweckfach einlegen. Legen Sie das Papier, welches Sie normalerweise verwenden, in die Papierkassette ein. Die Papierkassette ist praktisch, wenn große Mengen an Papier verwendet werden. Verwenden Sie das Mehrzweckfach, wenn Sie vorübergehend einen Typ oder ein Format von Papier verwenden, welches nicht in die Papierkassette eingelegt ist.
Grundfunktionen Hinweise zur Verwendung von Papier ● Verwenden Sie nur Papier, das sich vollständig an die Umgebung angepasst hat, in der das Gerät installiert ist. Die Verwendung von Papier, das unter verschiedenen Temperatur- und Feuchtigkeitsbedingungen gelagert wurde, kann zu Papierstau führen oder schlechte Druckqualität verursachen. Umgang mit und Lagerung von Papier ● Es wird empfohlen, dass Sie das Papier so bald als möglich nach dem Auspacken verwenden.
Grundfunktionen LINKS Speichern eines anwenderdefinierten Papierformats(P.
Grundfunktionen Einlegen von Papier in die Papierkassette 2529-02E Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Wenn Sie auf Papier drucken wollen, das nicht in der Papierkassette eingelegt ist, legen Sie das Papier in das Mehrzweckfach. Einlegen von Papier in das Mehrzweckfach(P. 135) Einlegen von Papier im Standardformat(P. 127) Einlegen von Papier im benutzerdefinierten Format(P.
Grundfunktionen ● Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Stellen Sie die Papierführungen auf die Positionen für das Papierformat ein, das Sie verwenden möchten.
Grundfunktionen Wenn Sie Papier im Format Legal einlegen ● Drücken Sie den Entriegelungshebel, und verlängern Sie die Papierkassette. 3 Legen Sie das Papier so ein, dass die Kante des Papierstapels an der Papierführung an der Vorderseite der Papierkassette ausgerichtet ist. ● Legen Sie das Papier mit der Druckseite nach oben ein. ● Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten des Papierstapels auszurichten.
Grundfunktionen ● Näheres zum Einlegen von Papier mit einem Logo finden Sie unter Papier(P. 143) . 4 Einlegen von bereits bedrucktem Setzen Sie die Papierkassette in das Gerät ein. ● Wenn Sie die Papierkassette bei auf gesetzter Option einsetzen, wird ein Bestätigungsbildschirm angezeigt. (P.
Grundfunktionen Einlegen von Papier im benutzerdefinierten Format Um benutzerdefiniertes Papier oder ein anderes Papier einzulegen, dessen Format sich nicht unter den Papierformatmarkierungen in der Papierkassette befindet, verwenden Sie das folgende Verfahren. 1 Ziehen Sie die Papierkassette heraus. LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn ● Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus.
Grundfunktionen 3 Legen Sie das Papier so ein, dass der Papierstapel an der Rückwand der Papierkassette anliegt. ● Legen Sie das Papier mit der Druckseite nach oben ein. ● Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten des Papierstapels auszurichten. Legen Sie Papier nicht über die Füllhöhenmarkierung hinaus ein ● Achten Sie darauf, dass der Papierstapel nicht über die Füllhöhenmarkierung ( ) hinausragt.
Grundfunktionen Richten Sie die Papierführungen genau an den Kanten des Papiers aus ● Zu eng oder nicht eng genug anliegende Papierführungen können Fehleinzüge oder Papierstaus verursachen. 5 Setzen Sie die Papierkassette in das Gerät ein. ● Wenn Sie die Papierkassette bei auf gesetzter Option einsetzen, wird ein Bestätigungsbildschirm angezeigt. (P.
Grundfunktionen LINKS Geeignetes Papier(P.
Grundfunktionen Einlegen von Papier in das Mehrzweckfach 2529-02F Wenn Sie auf Papier drucken wollen, das nicht in der Papierkassette eingelegt ist, legen Sie das Papier in das Mehrzweckfach ein. Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Einlegen von Papier in die Papierkassette(P. 127) Bei der LBP654Cx / LBP653Cdw(P. 135) Bei der LBP613Cdw / LBP611Cn(P.
Grundfunktionen 3 Schieben Sie die Papierführungen auseinander. ● Drücken Sie den Entriegelungshebel, um die Papierführungen nach außen zu verschieben. 4 Schieben Sie das Papier bis zum Anschlag in das Mehrzweckfach ein. ● Legen Sie das Papier mit der Druckseite nach oben ein. ● Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten des Papierstapels auszurichten.
Grundfunktionen ● Informationen zum Einlegen von Briefumschlägen oder Papier mit einem Logo finden Sie in von Briefumschlägen(P. 140) oder Einlegen von bereits bedrucktem Papier(P. 143) . 5 Einlegen Richten Sie die Papierführungen an den Kanten des Papiers aus. ● Schieben Sie die Papierführungen nach innen, bis sie eng an den Kanten des Papiers anliegen.
Grundfunktionen Wenn Sie Papier im Format A5 einlegen ● Wenn Sie das Papierformat einstellen, beachten Sie die aktuelle Papierausrichtung. Format und Typ des Papiers im Mehrzweckfach(P. 148) Querformat 1 Festlegen von Hochformat Schieben Sie die Papierführungen auseinander. ● Schieben Sie die Papierführungen nach außen. 2 Legen Sie das Papier ein, und richten Sie die Papierführungen an der Breite des Papiers aus. ● Legen Sie das Papier mit der Druckseite nach oben ein.
Grundfunktionen ● Um sicherzustellen, dass das Papier gerade eingezogen wird, halten Sie es mit beiden Händen, bis der Einzugsvorgang abgeschlossen ist. ● Informationen zum Einlegen von Briefumschlägen oder Papier mit einem Logo finden Sie in von Briefumschlägen(P. 140) oder Einlegen von bereits bedrucktem Papier(P. 143) . » Weiter mit Einlegen Festlegen von Format und Typ des Papiers im Mehrzweckfach(P.
Grundfunktionen Einlegen von Briefumschlägen 2529-02H Achten Sie darauf, Briefumschläge vor dem Einlegen gegebenenfalls flachzudrücken. Beachten Sie außerdem die Ausrichtung der Briefumschläge und die nach oben weisende Seite. Vorbereitungen für das Einlegen von Briefumschlägen(P. 140) In der Papierkassette(P. 141) Einlegen von Papier in das Mehrzweckfach(P.
Grundfunktionen 4 Richten Sie die Kanten der Briefumschläge auf einer ebenen Oberfläche bündig aus. In der Papierkassette Legen Sie die Briefumschläge Monarch, COM10, DL oder ISO-C5 hochkant (mit den langen Seiten an der Seite) und mit der klebstofffreien Seite (Vorderseite) nach oben weisend ein. Sie können die Rückseite von Briefumschlägen nicht bedrucken. ● Legen Sie die Briefumschläge so ein, dass die Kante mit der Umschlagklappe wie in der Abbildung gezeigt nach links weist.
Grundfunktionen 142
Grundfunktionen Einlegen von bereits bedrucktem Papier 2529-02J Wenn Sie Papier verwenden, das bereits mit einem Logo bedruckt wurde, achten Sie auf die Ausrichtung des Papiers, wenn Sie es einlegen. Legen Sie das Papier ordnungsgemäß ein, sodass der Druck auf der richtigen Seite des Papiers mit Logo erfolgt. Erstellen einseitiger Ausdrucke auf Papier mit Logos(P. 143) Erstellen doppelseitiger Ausdrucke auf Papier mit Logos(P.
Grundfunktionen Erstellen doppelseitiger Ausdrucke auf Papier mit Logos Legen Sie das Papier mit der Logo- und Vorderseite (der ersten mit dem Dokument zu bedruckenden Seite) nach unten weisend ein.
Grundfunktionen Angeben von Papierformat und -typ 2529-02K Sie müssen die Einstellungen für Papierformat und Papiertyp entsprechend dem eingelegten Papier vornehmen. Achten Sie darauf, die Papiereinstellungen zu ändern, wenn Sie Papier einlegen, das sich vom zuvor eingelegten Papier unterscheidet. Angeben von Format und Typ des Papiers in der Papierkassette(P. 146) Festlegen von Format und Typ des Papiers im Mehrzweckfach(P. 148) Speichern von Standardpapiereinstellungen für das Mehrzweckfach(P.
Grundfunktionen Angeben von Format und Typ des Papiers in der Papierkassette 2529-02L 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie die Zielpapierkassette. Bildschirm Startseite(P. 107) ● () wird nur angezeigt, wenn die optionale Kassetteneinheit installiert ist. Touchpanel-Modell 3 Schwarzweiß LCD-Modell Wählen Sie das Papierformat. ● Wenn das Format des eingelegten Papiers nicht angezeigt wird, wählen Sie .
Grundfunktionen ● Wenn Sie häufig benutztes Papierformat auf den Schaltflächen bis speichern, können Sie sie einfach mit einem Tastendruck aufrufen. Speichern eines anwenderdefinierten Papierformats(P. 154) 3 Wählen Sie . Wenn Sie Papier im Format A5 einlegen ● Wählen Sie im Querformat . Wählen Sie im Hochformat .
Grundfunktionen Festlegen von Format und Typ des Papiers im Mehrzweckfach 2529-02R Der hier abgebildete Bildschirm wird angezeigt, wenn Papier in das Mehrzweckfach eingelegt wird. Nehmen Sie die Einstellungen nach den Bildschirmanweisungen und entsprechend dem Format und Typ des eingelegten Papiers vor.
Grundfunktionen ● Wenn Sie häufig benutztes Papierformat auf den Schaltflächen bis speichern, können Sie sie einfach mit einem Tastendruck aufrufen. Speichern eines anwenderdefinierten Papierformats(P. 154) Schwarzweiß LCD-Modell ● Führen Sie die nachfolgenden Schritte der Reihe nach aus: ein 3 geben Sie die Papierbreite geben Sie die Papierlänge ein Wählen Sie . Wenn Sie Papier im Format A5 einlegen ● Wählen Sie im Querformat . Wählen Sie im Hochformat .
Grundfunktionen ● Handelt es sich bei der Einstellung des Papiertyps im Druckertreiber um [Auto], funktioniert das Gerät auf die gleiche Weise wie bei der Einstellung des Papiertyps auf [Normal 1]. LINKS Einlegen von Papier in das Mehrzweckfach(P. 135) Einschränken der angezeigten Papierformate(P. 156) Geeignetes Papier(P.
Grundfunktionen Speichern von Standardpapiereinstellungen für das Mehrzweckfach 2529-02S Sie können Standardpapiereinstellungen für das Mehrzweckfach speichern. Wenn Sie Standardeinstellungen speichern, brauchen Sie die Einstellungen nicht jedes Mal vorzunehmen, wenn Sie das gleiche Papier in das Mehrzweckfach einlegen.
Grundfunktionen ● Wenn Sie häufig benutztes Papierformat auf den Schaltflächen bis speichern, können Sie sie einfach mit einem Tastendruck aufrufen. Speichern eines anwenderdefinierten Papierformats(P. 154) Schwarzweiß LCD-Modell ● Führen Sie die nachfolgenden Schritte der Reihe nach aus: ein 3 geben Sie die Papierbreite geben Sie die Papierlänge ein Wählen Sie . Wenn Sie Papier im Format A5 einlegen ● Wählen Sie im Querformat . Wählen Sie im Hochformat .
Grundfunktionen Informationen zu ● Wenn Sie häufig das einzulegende Papier wechseln müssen, können Sie festlegen, das senkt die Anzahl der Schritte, die erforderlich sind, um jedes Mal die Einstellung zu ändern. Beachten Sie jedoch, dass durch diese Einstellung das Gerät den Druckvorgang ausführt, auch wenn die Papiertypeinstellung im Druckertreiber und das im Gerät tatsächlich eingelegte Papier nicht übereinstimmen.
Grundfunktionen Speichern eines anwenderdefinierten Papierformats 2529-02U Sie können bis zu drei häufig verwendete anwenderdefinierte Papierformate speichern. 1 Wählen Sie auf dem Bildschirm Startseite. Bildschirm Startseite(P. 107) 2 Wählen Sie . 3 Wählen Sie die Registriernummer aus. ● Wenn Sie am Schwarzweiß LCD-Modell die registrierte Nummer ausgewählt haben, fahren Sie mit der Auswahl fort.
Grundfunktionen Informationen zu ● Wenn Sie häufig das einzulegende Papier wechseln müssen, können Sie festlegen, das senkt die Anzahl der Schritte, die erforderlich sind, um jedes Mal die Einstellung zu ändern. Beachten Sie jedoch, dass durch diese Einstellung das Gerät den Druckvorgang ausführt, auch wenn die Papiertypeinstellung im Druckertreiber und das im Gerät tatsächlich eingelegte Papier nicht übereinstimmen.
Grundfunktionen Einschränken der angezeigten Papierformate 2529-02W Sie können sicherstellen, dass nur häufig verwendete Papierformate auf dem Bildschirm zur Auswahl der Papierformateinstellung angezeigt werden. 1 2 3 4 Wählen Sie auf dem Bildschirm Startseite. Bildschirm Startseite(P. 107) Wählen Sie . Wählen Sie die Papierquelle, für die Sie die anzuzeigenden Papierformate festlegen möchten.
Grundfunktionen Automatische Auswahl einer entsprechenden Papierzufuhr für die jeweilige Funktion 2529-02X Aktivieren oder deaktivieren Sie die automatische Papierzufuhrauswahl für die Papierzufuhren. Wenn die Funktion auf gesetzt ist, wählt das Gerät automatisch eine Papierzufuhr, in der das Papier mit dem entsprechenden Format für den jeweiligen Druckjob eingelegt ist.
Grundfunktionen 6 Wählen Sie .
Grundfunktionen Anpassen des Displays 2529-02Y Um die Verwendung des Bildschirms Startseite einfacher zu gestalten, können Sie ihn anpassen. Anpassen des Bildschirms Startseite Sie können die angezeigten Elemente neu anordnen und den Bildschirm anpassen, um die Auswahl von Funktionen zu vereinfachen. Anpassen des Bildschirms Startseite(P.
Grundfunktionen Anpassen des Bildschirms Startseite 2529-030 Sie können die Anzeigereihenfolge der Elemente ändern, um den Zugriff auf den Bildschirm Startseite einfacher zu machen, und den Bildschirm Startseite anpassen. Ändern der Anordnung von Schaltflächen (Touchpanel-Modell)(P. 160) Ändern der Anzeigereihenfolge von Elementen (Schwarzweiß LCD-Modell)(P.
Grundfunktionen ● Wählen Sie die zu löschende Lücke, und wählen Sie Leerz.lösch. 5 Wählen Sie . Ändern der Anzeigereihenfolge von Elementen (Schwarzweiß LCD-Modell) Damit die Schaltflächen einfacher zu verwenden sind, können Sie die Anzeigereihenfolge der Elemente beliebig ändern. 1 2 Wählen Sie auf dem Bildschirm Startseite. Bildschirm Startseite(P. 107) Verwenden Sie .
Grundfunktionen Ändern von Standardeinstellungen für Funktionen 2529-031 Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie bei einer Aktion nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen. ◼ Speichermedium Druck Weitere Informationen zu den veränderbaren Einstellungselementen finden Sie unter gespeicherte Dateien>(P. 409) .
Grundfunktionen Einstellen von Tönen 2529-032 Das Gerät gibt in einer Vielzahl von Situationen Signaltöne aus, beispielsweise bei einem Papierstau oder Fehler. Sie können die Lautstärke der einzelnen Signaltöne getrennt einstellen. 1 Anzeigen des Bildschirms [Lautstärkeeinstellungen] Touchpanel-Modell Drücken Sie ( ). Schwarzweiß LCD-Modell Wählen Sie 2 . Wählen Sie eine Einstellung aus.
Grundfunktionen Wechseln in den Schlafmodus 2529-033 Im Schlafmodus wird der Energieverbrauch des Geräts gesenkt, indem die Stromversorgung des Bedienfelds deaktiviert wird. Wenn am Gerät längere Zeit keine Funktionen ausgeführt werden, beispielsweise während der auf dem Bedienfeld drücken. Mittagspause, können Sie Strom sparen, indem Sie einfach Im Schlafmodus ● Wenn das Gerät in den Schlafmodus wechselt, leuchtet gelbgrün.
Grundfunktionen Ändern der Schlafmoduseinstellung auf die festgelegte Zeit Sie können eine Einstellung konfigurieren, die das Gerät automatisch zu einer bestimmten Zeit in den Schlafmodus schaltet. Sie können ebenfalls eine Einstellung konfigurieren, so dass der Schlafmodus zu der bestimmten Zeit ausgelöst wird. Touchpanel-Modell Wählen Sie oder
Drucken Drucken Drucken ............................................................................................................................................................... 167 Drucken von einem Computer ......................................................................................................................... 168 Abbrechen des Druckens ..............................................................................................................................
Drucken Drucken 2529-034 Sie haben verschiedene Möglichkeiten, das Gerät als Drucker zu verwenden. Sie können mithilfe des Druckertreibers Dokumente auf dem Computer oder Bilddateien von einem USB-Speichergerät drucken. Nutzen Sie die vielen Druckfunktionen ganz nach Bedarf. ◼ Drucken von einem Computer Sie können mithilfe des Druckertreibers ein auf dem Computer erstelltes Dokument ausdrucken. Drucken von einem Computer(P.
Drucken Drucken von einem Computer 2529-035 Sie können mit einer Anwendung auf dem Computer erstellte Dokumente mithilfe des Druckertreibers drucken. Der Druckertreiber verfügt über nützliche Einstellungen wie Vergrößern/Verkleinern und doppelseitigen Druck, so dass Sie Ihre Dokumente auf unterschiedlichste Art ausdrucken können. Bevor Sie diese Funktion nutzen können, müssen Sie jedoch einige Schritte ausführen, beispielsweise den Druckertreiber auf dem Computer installieren.
Drucken 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf. 2 Wählen Sie den Druckertreiber für dieses Gerät, und klicken Sie auf [Einstellungen] 3 Legen Sie gegebenenfalls die Druckeinstellungen fest, und klicken Sie auf [OK]. oder [Eigenschaften]. ● Schalten Sie die Registerkarte gemäß den Einstellungen um. 4 Klicken Sie auf [Drucken] oder [OK]. ➠ Das Drucken beginnt.
Drucken Abbrechen des Druckens 2529-036 Sie können das Drucken vom Computer aus oder auf dem Bedienfeld des Geräts abbrechen. Am Computer(P. 170) Auf dem Bedienfeld(P. 171) Am Computer Sie können den Druckvorgang über das Druckersymbol abbrechen, das in der Taskleiste auf dem Desktop angezeigt wird. 1 Doppelklicken Sie auf das Druckersymbol. Wenn das Druckersymbol nicht angezeigt wird ● Öffnen Sie den Druckerordner ( Anzeigen des Druckerordners(P.
Drucken Abbrechen über eine Anwendung ● Bei einigen Anwendungen wird ein Bildschirm wie der folgende angezeigt. Sie können den Druckvorgang abbrechen, indem Sie auf [Abbrechen] klicken. Auf dem Bedienfeld Brechen Sie den Druckvorgang mit ◼ Drücken Sie oder Statusmonitor ( ) ab. , um abzubrechen Wenn nach dem Drücken von auf dem Bildschirm eine Liste von Dokumenten angezeigt wird Wählen Sie das Dokument, das Sie abbrechen möchten, und wählen Sie [Abbrechen] [Ja].
Drucken Schwarzweiß LCD-Modell Wählen Sie das Dokument ● Nach dem Druckabbruch werden möglicherweise einige Seiten ausgegeben. LINKS Grundlegende Druckfunktionen(P. 168) Anzeigen des Druckstatus und des Logs(P.
Drucken Anzeigen des Druckstatus und des Logs 2529-037 Sie können den aktuellen Druckstatus und die Logs für gedruckte Dokumente anzeigen. ● Wenn auf gesetzt ist, können Sie die Drucklogs nicht prüfen. anzeigen>(P. 423)
Drucken ➠ Zeigt die detaillierten Informationen zum Dokument an. ● Der angezeigte Dokumentenname oder Benutzername entspricht möglicherweise nicht dem tatsächlichen Dokumenten- oder Benutzernamen. Wenn eine dreistellige Zahl im Fall von angezeigt wird ● Diese Zahl ist ein Fehlercode. Gegenmaßnahmen für den jeweiligen Fehlercode(P. 505) LINKS Grundlegende Druckfunktionen(P. 168) Abbrechen des Druckens(P.
Drucken Verschiedene Druckmethoden 2529-038 In diesem Abschnitt wird beschrieben, wie Sie durch Hinzufügen einer PIN ein Dokument drucken und wie Sie eine auf einem USB-Speichergerät befindliche Datei ohne den Druckertreiber drucken, und wie Sie I-Faxe empfangen und drucken. Ein durch eine PIN geschütztes Dokument drucken (Geschützter Druck)(P. 176) Drucken von einem USBSpeichergerät (Speichermedium Druck)(P. 180) 175 Empfangen von I-Faxe für das Drucken(P.
Drucken Ein durch eine PIN geschütztes Dokument drucken (Geschützter Druck) 2529-039 Wenn Sie von einem Computer aus drucken und für ein Dokument eine PIN definieren, bleibt das Dokument im Gerät gespeichert und wird erst gedruckt, wenn die richtige PIN am Bedienfeld des Geräts eingegeben wird. Diese Funktion wird als "Geschützter Druck" bezeichnet, das mit einer PIN gesicherte Dokument als "geschütztes Dokument".
Drucken Drucken mit der Funktion für geschützten Druck 2529-03A In diesem Abschnitt wird beschrieben, wie Sie ein Dokument von einer Anwendung aus als geschütztes Dokument drucken. Im ersten Teil des Abschnitts wird dabei erläutert, wie Sie ein geschütztes Dokument an das Gerät senden, im zweiten Teil, wie Sie das geschützte Dokument am Gerät ausdrucken. Senden eines geschützten Dokuments von einem Computer an das Gerät(P. 177) Ausdrucken geschützter Dokumente(P.
Drucken Ausdrucken geschützter Dokumente Druckt die an das Gerät gesendeten geschützten Dokumente. Nachdem eine gültige Zeitdauer ( Ändern der gültigen Speicherdauer für geschützte Dokumente(P. 178) ) abgelaufen ist, wird das geschützte Dokument aus dem Speicher des Geräts gelöscht und kann nicht mehr gedruckt werden. ● Wenn geschützte Dokumente nicht gedruckt werden, belegen sie Speicher und verhindern möglicherweise, dass das Gerät normale (nicht geschützte) Dokumente druckt.
Drucken 2 Wählen Sie . 3 Wählen Sie . ● Wenn der Anmeldebildschirm erscheint, geben Sie die korrekte ID und PIN ein. Anmelden am Gerät(P. 123) 4 Wählen Sie . Wenn nicht gewählt werden kann ● Setzen Sie auf . Deaktivieren des geschützten Drucks ● Setzen Sie auf , und starten Sie das Gerät neu.
Drucken Drucken von einem USB-Speichergerät (Speichermedium Druck) 2529-03C Sie können Dateien direkt drucken, indem Sie ein USB-Speichergerät an das Gerät anschließen. Anhand dieser Funktion können Sie ohne einen Computer drucken. Weitere Informationen über die verfügbaren USB-Speichergeräte und wie sie einzusetzen oder zu entfernen sind, finden Sie unter Setzen Sie ein USB-Speichergerät ein(P. 90) . Drucken einer Datei von einem USB-Speichergerät am Touchpanel-Modell(P.
Drucken So ändern Sie die Dateianzeigemethode Sie können "Vorschau" oder "Details" als Dateianzeigemethode wählen. Vorschau Details ● Sie können die Inhalte einer PDF-Datei nicht anzeigen. ● Sie können die für die Anzeige des Bildschirms (P. 416) Druck> verwendete So ändern Sie die Sortierreihenfolge der Dateien Sie können die Sortierreihenfolge der Dateien auf einem USB-Speichergerät ändern.
Drucken Verwendet das Papier, das im Mehrzweckfach eingelegt wurde, um Dateien zu drucken. Verwendet das Papier, das in die Papierkassette (Kassette 1) des Geräts eingelegt wurde, um Dateien zu drucken. Verwendet das Papier, das in die optionale Kassetteneinheit (Kassette 2) eingelegt wurde, um Kopien zu erstellen. ● Wenn Sie weitere Druckeinstellungen festlegen, wählen Sie . Sie können die Helligkeit der Druckausgaben anpassen.
Drucken Druckt auf einer Seite des Papiers. Druckt auf beiden Seiten des Blattes so, dass die gedruckten Seiten nach erfolgter Bindung horizontal geöffnet werden. Druckt auf beiden Seiten des Blattes so, dass die gedruckten Seiten nach erfolgter Bindung vertikal geöffnet werden. ● steht bei manchen Papierformaten oder -typen möglicherweise nicht zur Verfügung. Geeignetes Papier(P. 536) ● ist für den Druck von TIFF-Dateien nicht verfügbar.
Drucken ● Bei einer PDF-Datei können Sie 9 oder 16 Seiten von Bilddaten auf einer Seite eines Papierblattes drucken, indem Sie unter verwenden. Sie können die Druckeinstellungen für JPEG- und TIFF-Bilder ändern. Sie können doppelseitige Ausdrucke erstellen. Wählen Sie die Bindungsposition aus. (nur JPEG-Dateien) Druckt Daten für mehrere Seiten von Bilddaten auf derselben Seite eines Papierblattes.
Drucken Bilder mit kleinem Text oder feinen Linien werden deutlich gedruckt. Sie können die Druckeinstellungen für PDF-Dateien ändern. Sie können doppelseitige Ausdrucke erstellen. Wählen Sie die Bindungsposition aus. Druckt Daten für mehrere Seiten von Bilddaten auf derselben Seite eines Papierblattes. Sie können die Anzahl der Seiten festlegen, die auf einer Seite eines Papierblattes gedruckt werden sollen.
Drucken ● Wenn Sie auf setzen, werden Bereiche der Druckdaten eventuell in den Kantenbereichen nicht gedruckt oder das Papier kann je nach Dokument teilweise verschmiert sein. Mit dieser Einstellung geben Sie an, ob Annotationen in der PDF-Datei gedruckt werden sollen. Druckt keine Anmerkungen. Druckt nur Anmerkungen, die in der PDF-Datei zum Drucken festgelegt sind.
Drucken Wählen Sie das zu priorisierende Element bei der Durchführung der Farbanpasung unter . (P. 398) . Weitere Informationen zur Beschreibung der Einstellung finden Sie unter Legen Sie fest, ob die CMYK-Daten anhand des angegebenen Überdrucks als Composite-Ausgabe überdruckt (P. 400) .
Drucken separat für Grafiken und Bilder anwenden. Eine Erläuterung dieser Einstellung finden Sie unter (P. 367) . 5 Wählen Sie . ➠ Die Auswahl von startet den Schwarzweiß-Druckvorgang. Die Auswahl von startet den farbigen Druckvorgang. ● Wenn Sie das Drucken abbrechen wollen, wählen Sie ● Wenn Sie immer mit denselben Einstellungen drucken möchten: . Speichermedium Druck(P.
Drucken So wählen Sie alle Dateien 1 Wählen Sie . ● Zum Aufheben der gesamten Auswahl wählen Sie . 2 Wenn die Dateitypen gemischt sind, wählen Sie oder . 4 Wählen Sie . 5 Legen Sie die gewünschten Druckeinstellungen fest. ● Wählen Sie das Element, das Sie festlegen wollen. Legen Sie die Anzahl von Kopien fest. Geben Sie mit den Zahlentasten die gewünschte Anzahl ein, und drücken Sie .
Drucken Druckt Daten für mehrere Seiten von Bilddaten auf derselben Seite eines Papierblattes. Sie können die Anzahl der Seiten festlegen, die auf einer Seite eines Papierblattes gedruckt werden sollen. Um beispielsweise vier Seiten auf einer Seite eines Papierblattes zu drucken, wählen Sie <4 auf 1>. Sie können doppelseitige Ausdrucke erstellen. Wählen Sie die Bindungsposition aus.
Drucken Sie können die Helligkeit der Bilder einstellen. Justieren Sie die Helligkeit, und drücken Sie . ● Sie können die der TIFF-Dateien nur einstellen, wenn sie JPEG-komprimiert sind. Sie können das Druckverfahren auswählen, das verwendet wird um Halbtöne (Übergang zwischen den helleren und dunkleren Bereichen eines Bildes) für eine optimale Bildqualität zu reproduzieren.
Drucken Bestimmen Sie, ob das Original vergrößert oder verkleinert werden soll, um den Bereich des Papiers zu drucken. Beachten Sie, dass sich die Formatvergrößerung/Formatverkleinerung nicht auf das Seitenverhältnis des Originals auswirkt. Legen Sie fest, ob der Druckbereich auf das Papierformat vergrößert werden soll.
Drucken Legen Sie fest, ob Sie graue Daten in CMYK-Daten (Cyan, Magenta, Gelb und Schwarz) mithilfe des Graustufenprofils des Geräts konvertieren wollen. Weitere Informationen zur Beschreibung der Einstellung (P. 396) . finden Sie unter Wählen Sie das entsprechende Profil zum Drucken von Daten. Diese Option können Sie für den jeweiligen Bildtyp in einem Dokument festlegen.
Drucken Konfigurieren Sie die Glättungseinstellung für das Drucken des Umrisses von Grafiken (wie beispielsweise mit Anwendungen erstellte Abbildungen) oder Text mit einem glatten Übergang. wendet einen stärkeren Glättungseffekt an als . Sie können die Einstellung separat für Text und Grafiken (P. 366) . anwenden.
Drucken Empfangen von I-Faxe für das Drucken 2529-03E Internet Fax (I-Fax) ist eine Funktion, die eine Datei als eine TIFF-Bilddatei an eine E-Mail anhängt und sie überträgt. Dieses Gerät kann I-Faxe empfangen und sie drucken. I-Faxe können automatisch in bestimmten Intervallen und ebenso manuell empfangen werden. Konfigurieren der I-Fax EM-Einstellungen(P. 195) Manuelles Empfangen von I-Faxen(P.
Drucken [POP-Server] Geben Sie alphanumerische Zeichen als POP3-Servername oder IP-Adresse für das Empfangen von I-Faxen ein. [Anwendername] Geben Sie alphanumerische Zeichen als Benutzername für das angegebene E-Mail-Konto ein. [Passwort einstellen/ändern] Zum Einstellen oder Ändern des Passworts, aktivieren Sie das Kontrollkästchen, und geben Sie alphanumerische Zeichen in das Textfeld [Passwort] ein. [POP EM] Aktivieren Sie das Kontrollkästchen für den Empfang von I-Faxen.
Drucken 8 Legen Sie die gewünschten Druckeinstellungen fest. Festlegen der Einstellung für doppelseitigen Druck (P. 407) Festlegen des Papierformats (P. 408) ● Je nach dem verwendeten Netzwerk, müssen Sie unter Umständen die POP3-Port-Einstellung ändern ( Ändern von Portnummern(P. 246) ). Weitere Informationen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator.
Verbindung mit Mobilgeräten Verbindung mit Mobilgeräten Verbindung mit Mobilgeräten ................................................................................................................ 199 Verbinden mit Mobilgeräten ............................................................................................................................ 200 Herstellen einer Verbindung zu einem Wireless LAN-Router (LAN-Verbindung) ...........................................
Verbindung mit Mobilgeräten Verbindung mit Mobilgeräten 2529-03F Die Verbindung des Geräts mit einem Mobilgerät wie beispielsweise einem Smartphone oder Tablet ermöglicht es Ihnen, eine entsprechende Anwendung zu verwenden, um den Druckvorgang oder einen anderen Vorgang mit Leichtigkeit durchzuführen. Sie können auch ein Mobilgerät zur Fernsteuerung des Geräts, zum Überprüfen des Druckstatus und zum Ändern der Geräteeinstellungen verwenden. Verbinden mit Mobilgeräten(P.
Verbindung mit Mobilgeräten Verbinden mit Mobilgeräten 2529-03H Es gibt zwei Methoden ein Mobilgerät mit dem Gerät zu verbinden: Verbinden über einen Wireless LAN-Router und drahtlose, direkte Kommunikation mit dem Gerät. Wählen Sie eine Verbindungsmethode in Übereinstimmung mit der Kommunikationsumgebung und dem Gerät, das Sie verwenden. Führen Sie die Kommunikation mit dem Mobilgerät über ( Bildschirm Startseite(P. 107) ) durch.
Verbindung mit Mobilgeräten Herstellen einer Verbindung zu einem Wireless LANRouter (LAN-Verbindung) 2529-03J Wenn ein Wireless LAN-Router mit dem an das Gerät verbundenen Netzwerk verbunden ist, können Sie eine Kommunikation mit einem Mobilgerät über den Wireless LAN-Router auf dieselbe Weise für einen Computer herstellen. Weitere Informationen wie Sie ein Mobilgerät mit Ihrem Wireless LAN-Router verbinden, finden Sie im Handbuch Ihres Netzwerkgerätes oder bei Ihrem Hersteller.
Verbindung mit Mobilgeräten 2 Wählen Sie . 3 Starten Sie Canon PRINT Business am Mobilgerät. 4 Verwendung des Geräts über Anwendungen(P. 208) Lesen Sie mit dem Mobilgerät den QR-Code ab, der auf dem Bildschirm erscheint. ◼ Herstellen einer Verbindung mithilfe von NFC (Android) Bevor Sie NFC verwenden, prüfen Sie, ob auf gesetzt ist. (P. 423) 1 Starten Sie Canon PRINT Business am Mobilgerät. 2 Aktivieren Sie die NFC-Einstellungen des Mobilgeräts.
Verbindung mit Mobilgeräten Herstellung einer direkten Verbindung (Zugriffspunktmodus) 2529-03K Auch in einer Umgebung ohne einen Wireless LAN-Router können Sie mithilfe des "Zugriffspunktmodus" über Ihr Mobilgerät eine direkte, drahtlose Verbindung zum Gerät ohne komplizierte Verbindungseinstellungen herstellen. Vorbereiten für eine Direktverbindung (Access Point-Modus)(P. 203) Herstellung einer direkten Verbindung (Touchpanel-Modell)(P.
Verbindung mit Mobilgeräten Herstellen einer gleichzeitigen Verbindung von mehreren Mobilgeräten ● Konfigurieren Sie frei die SSID und den Netzwerkschlüssel des Geräts. Zugriffspunktmodus>(P. 314)
Verbindung mit Mobilgeräten 5 Lesen Sie mit dem Mobilgerät den QR-Code ab, der auf dem Bildschirm erscheint. 6 Sobald der Zielvorgang abgeschlossen ist, wählen Sie . ◼ Herstellen einer Verbindung mithilfe von NFC (Android) Bevor Sie NFC verwenden, prüfen Sie, ob auf gesetzt ist. 1 (P. 423) Wählen Sie auf dem Bildschirm Startseite. Startseite(P. 107) Bildschirm ● Wenn ein Mobilgerät bereits verbunden ist, fahren Sie mit Schritt 3 fort.
Verbindung mit Mobilgeräten ● Während der direkten Verbindung können Sie abhängig von Ihrem Mobilgerät möglicherweise keine Verbindung zum Internet herstellen. ● Wenn eine drahtlose Verbindung von einem Mobilgerät nicht innerhalb von 5 Minuten hergestellt wird, während SSID und Netzwerkschlüssel angezeigt werden, endet der Verbindungswartestatus.
Verbindung mit Mobilgeräten ● Wählen Sie auf dem Bildschirm bei bestehender Direktverbindung, um das verbundene Mobilgerät zu überprüfen. ● Während der direkten Verbindung können Sie abhängig von Ihrem Mobilgerät möglicherweise keine Verbindung zum Internet herstellen. ● Wenn eine drahtlose Verbindung von einem Mobilgerät nicht innerhalb von 5 Minuten hergestellt wird, während SSID und Netzwerkschlüssel angezeigt werden, endet der Verbindungswartestatus.
Verbindung mit Mobilgeräten Verwendung des Geräts über Anwendungen 2529-03L Führen Sie Druckvorgänge und andere Vorgänge von dem mit dem Gerät verbundenen Mobilgerät mithilfe der Anwendungen aus. Verschiedene Anwendungen einschließlich der exklusiven Anwendungen für Canon werden unterstützt. Verwenden Sie sie ordnungsgemäß in Übereinstimmung mit Ihrem Gerät, der Anwendung und der Situation.
Verbindung mit Mobilgeräten ◼ Drucken mit Google Cloud Print Sie können Anwendungen und Dienste verwenden, die Google Cloud Print unterstützen, um von einem Computer oder einem Mobilgerät ohne Druckertreiber zu drucken. Verwenden von Google Cloud Print(P.
Verbindung mit Mobilgeräten Verwenden von AirPrint 2529-03R In diesem Abschnitt werden die erforderlichen Einstellungen für die Verwendung von AirPrint und die Schritte für die Verwendung von Apple Geräten beschrieben. Einstellungen AirPrint Konfigurieren von AirPrint-Einstellungen(P. 210) Anzeigen des Bildschirms für AirPrint(P. 213) Funktionen von AirPrint Drucken mit AirPrint(P. 215) Fehlerbehebung Wenn AirPrint nicht verwendet werden kann(P.
Verbindung mit Mobilgeräten 5 Legen Sie die nötigen Einstellungen fest. [AirPrint verwenden] Aktivieren Sie das Kontrollkästchen, um AirPrint zu aktivieren. Zum Deaktivieren von AirPrint deaktivieren Sie das Kontrollkästchen. [Druckername] Geben Sie den Namen des Geräts ein. Wenn ein mDNS Name unter [Einstellungen mDNS] ( von DNS(P. 65) ) bereits registriert wurde, wird der registrierte Name angezeigt. Konfigurieren [Ort] Geben Sie den Standort des Geräts ein.
Verbindung mit Mobilgeräten ● Die Eingabe des Druckernamens macht es einfacher mehrere Drucker, die AirPrint unterstützen, zu identifizieren. ◼ Ändern der Einstellungen von mit AirPrint verfügbaren Funktionen Wenn Sie Funktionen deaktivieren möchten, die Sie mit AirPrint nicht verwenden werden, oder wenn Sie die Kommunikation verschlüsseln möchten, konfigurieren Sie die erforderlichen Einstellungen über das Bedienfeld.
Verbindung mit Mobilgeräten Anzeigen des Bildschirms für AirPrint Rufen Sie den Bildschirm für AirPrint auf, auf dem Sie nicht nur auf die AirPrint-Einstellungen zugreifen, sondern auch Informationen zu Verbrauchsmaterial wie Papier und Tonerpatrone anzeigen können. Darüber hinaus können Sie die Einstellungen der Sicherheitsfunktion konfigurieren. 1 Wählen Sie [Systemeinstellungen] [Drucker & Scanner], und fügen Sie dann das Gerät dem von Ihnen verwendeten Mac hinzu.
Verbindung mit Mobilgeräten [Einstellungen AirPrint] Ermöglicht Ihnen die Überprüfung der in den AirPrint Einstellungen eingegebenen Werte, wie beispielsweise Name und Standort des Geräts. Sie können auf [Bearbeiten] klicken, um die Einstellungen zu ändern. [Andere Einstellungen] [Sicherheitseinstellungen beim Drucken] Konfigurieren Sie die Sicherheitseinstellungen beim Drucken über TLS oder die Authentisierung. [Einstellungen TLS] Ermöglicht es Ihnen, den Schlüssel und das Zertifikat für TLS ändern.
Verbindung mit Mobilgeräten Drucken mit AirPrint 2529-03S Sie können von einem iPad, iPhone, iPod touch oder Mac ohne einen Druckertreiber drucken. Drucken von einem iPad, iPhone oder iPod touch(P. 215) Drucken von einem Mac(P. 216) Systemanforderungen Für das Drucken mit AirPrint ist eines der folgenden Apple Geräte erforderlich. ● iPad (alle Modelle) ● iPhone (3GS oder höher) ● iPod touch (3. Generation oder höher) ● Mac (Mac OS X 10.7 oder höher)* *OS X v10.
Verbindung mit Mobilgeräten 2 Tippen Sie in der Anwendung auf dem Apple-Gerät auf , um die Menüoptionen aufzurufen. 3 Tippen Sie auf [Drucken]. 4 Wählen Sie dieses Gerät unter [Drucker]. ● Die mit dem Netzwerk verbundenen Drucker werden hier angezeigt. Wählen Sie hier dieses Gerät aus. ● Der Bildschirm zur Auswahl dieses Geräts unter [Drucker] wird bei Anwendungen, die AirPrint nicht unterstützen, nicht angezeigt. Mit solchen Anwendungen können Sie nicht drucken.
Verbindung mit Mobilgeräten 4 Wählen Sie das Gerät im Druckdialogfeld aus. ● Die mit dem Mac verbundenen Drucker werden angezeigt. Wählen Sie hier dieses Gerät aus. 5 Legen Sie die gewünschten Druckeinstellungen fest. ● Welche Einstellungen und Papierformate zur Verfügung stehen, hängt von der verwendeten Anwendung ab. 6 Klicken Sie auf [Drucken]. ➠ Das Drucken beginnt.
Verbindung mit Mobilgeräten Wenn AirPrint nicht verwendet werden kann 2529-03U Wenn AirPrint nicht verwendet werden kann, probieren Sie die folgenden Lösungsansätze. ● Vergewissern Sie sich, dass das Gerät eingeschaltet ist. Wenn das Gerät eingeschaltet ist, schalten Sie es zunächst aus, warten Sie anschließend mindestens 10 Sekunden lang, und schalten Sie es dann wieder ein, um zu prüfen, ob das Problem damit behoben ist. ● Vergewissern Sie sich, dass auf dem Gerät keine Fehlermeldungen angezeigt werden.
Verbindung mit Mobilgeräten Verwenden von Google Cloud Print 2529-03W Google Cloud Print ist ein Dienst, der es Benutzern mit einem Google-Konto ermöglicht, von einem mit dem Internet verbundenen Smartphone, Tablet oder Computer über Anwendungen wie beispielsweise Google Cloud Print zu drucken. Im Gegensatz zum herkömmlichen Drucken von einem Computer ist hier kein Druckertreiber erforderlich. Überprüfen der Geräteeinstellungen(P. 219) Registrieren des Geräts bei Google Cloud Print(P.
Verbindung mit Mobilgeräten ● Weitere Informationen über die Grundfunktionen, die bei der Konfiguration des Geräts über die Remote UI auszuführen sind, finden Sie unter Einstellen von Menüoptionen über Remote UI(P. 286) . 1 2 Starten Sie Remote UI, und melden Sie sich als Administrator an. Starten von Remote UI(P. 278) Klicken Sie auf der Portalseite auf [Einstellungen/Registrierung]. Remote UI- Bildschirm(P.
Verbindung mit Mobilgeräten Registrieren über ein Mobilgerät oder Google Chrome ● Sie können das Gerät über ein Mobilgerät oder Google Chrome registrieren. Bevor die Registrierung abgeschlossen wird, erscheint ein Bestätigungsbildschirm im Display des Geräts. Drücken Sie , um die Registrierung abzuschließen. ● Informationen zur Vorgehensweise bei der Registrierung finden Sie in der Anleitung Ihres Geräts oder auf der Google Cloud Print-Website.
Verbindung mit Mobilgeräten Verwalten des Geräts über die Fernsteuerung 2529-03X Sie können Remote UI über einen auf Ihrem Smartphone oder Tablet installierten Webbrowser verwenden. Auf diese Weise können Sie den Status des Geräts überprüfen und unterschiedliche Einstellungen über das Mobilgerät ausführen. Unterstützte Webbrowser Die folgenden Webbrowser unterstützen Remote UI für Mobilgeräte.
Verwaltung des Geräts Verwaltung des Geräts Verwaltung des Geräts ............................................................................................................................... 224 Festlegen von Zugriffsrechten ......................................................................................................................... 226 Einstellen der Systemmanager-ID und PIN ...................................................................................................
Verwaltung des Geräts Verwaltung des Geräts 2529-03Y Um die mit dem Gebrauch dieses Geräts verbundenen Risiken, wie Abfluss personenbezogener Daten oder unbefugte Verwendung seitens Dritter zu senken, sind konstante und effektive Sicherheitsmaßnahmen erforderlich. Ein Administrator sollte wichtige Einstellungen, wie zum Beispiel Zugriffsrechte und Sicherheitseinstellungen verwalten, um zu gewährleisten, dass das Gerät sicher verwendet wird.
Verwaltung des Geräts ◼ Verwalten der Systemkonfiguration und Einstellungen Aktualisieren der Firmware(P. 292) Initialisieren von Einstellungen(P.
Verwaltung des Geräts Festlegen von Zugriffsrechten 2529-040 Schützen Sie das Gerät vor unbefugtem Zugriff, indem Sie nur Benutzern mit entsprechenden Zugriffsrechten die Verwendung gestatten. Zugriffsrechte werden für Systemadministratoren, allgemeine Benutzer und für Remote UI einzeln erteilt. Wenn Zugriffsrechte erteilt wurden, muss der Benutzer zum Drucken oder zum Ändern von Einstellungen eine ID und eine PIN eingeben.
Verwaltung des Geräts Einstellen der Systemmanager-ID und PIN 2529-041 Stellen Sie das Systemmanagerkonto ein, die "Systemmanager-ID". Sie können auch eine PIN für die SystemmanagerID festlegen. Wenn die Systemmanager-ID festgelegt ist, können Sie auf Elemente zugreifen, die Administratorrechte erfordern, zum Beispiel auf und , jedoch nur wenn die Systemmanager-ID und die PIN korrekt eingegeben wurden.
Verwaltung des Geräts ● Näheres zur Eingabe von Text finden Sie unter Eingeben von Text(P. 119) . ● Vergessen Sie Ihre PIN nicht. Wenn Sie Ihre PIN vergessen haben sollten, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support. Konfigurieren von Einstellungen über Remote UI ● Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an.
Verwaltung des Geräts Einstellen der Verwaltung per Abteilungs-IDs 2529-042 Sie können den Zugriff auf das Gerät mithilfe verschiedener IDs für verschiedene Benutzer oder Gruppen steuern. Wenn die Verwaltung per Abteilungs-ID aktiviert ist und ein Benutzer versucht, das Gerät zu benutzen, wird ein Anmeldebildschirm angezeigt, und der Benutzer muss eine korrekte Abteilungs-ID sowie die passende PIN eingeben, bevor er das Gerät verwenden kann.
Verwaltung des Geräts 2 Legen Sie die nötigen Einstellungen fest. [Abteilungs-ID] Geben Sie die zu registrierende Nummer der Abteilungs-ID ein. [PIN einstellen] Aktivieren Sie für die Einstellung einer PIN das Kontrollkästchen, und geben Sie dieselbe Nummer sowohl in das Textfeld [PIN] als auch in [Bestätigen] ein. [Funktionen beschränken] Sie können die Anzahl der zu druckenden Seiten sowie die für die Abteilungen zu registrierenden, verfügbaren Funktionen beschränken.
Verwaltung des Geräts Aktivieren der Verwaltung per Abteilungs-IDs Nachdem Sie die benötigten Abteilungs-IDs gespeichert haben, aktivieren Sie die Verwaltung per Abteilungs-IDs. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI(P. 278) Klicken Sie auf der Portalseite auf [Einstellungen/Registrierung]. Bildschirm(P. 279) 3 Wählen Sie [Anwenderverwaltung] 4 Klicken Sie auf [Bearbeiten]. 5 Aktivieren Sie das Kontrollkästchen [Verwaltung Abteilungs-ID].
Verwaltung des Geräts Verwenden des Bedienfelds ● Sie können die Verwaltung per Abteilungs-IDs auch über auf dem Bildschirm Startseite ein- oder ausschalten. (P. 421) Anmelden am Gerät ● Wenn die Verwaltung per Abteilungs-IDs aktiviert ist und Sie versuchen das Gerät zu benutzen, wird der folgende Anmeldebildschirm angezeigt. Anmelden am Gerät(P.
Verwaltung des Geräts Geben Sie bei Bedarf die PIN entsprechend zur Abteilungs-ID ein. [Überprüfen] Klicken Sie hier, um zu überprüfen, ob die richtige ID und PIN eingegeben wurden. Diese Funktion steht nicht zur Verfügung, wenn das Gerät und der Computer über einen USB- oder WSD-Anschluss (Web Services on Devices) verbunden sind.
Verwaltung des Geräts [Druckaufträge mit unbekannten IDs zulassen] Um von einem Computer einen Auftrag zu senden, wenn die Verwaltung per Abteilungs-ID aktiviert ist, müssen Sie die richtige ID und PIN eingeben ( Aktivieren der Verwaltung per Abteilungs-ID für Aufträge von einem Computer(P. 232) ). Wenn aber das Kontrollkästchen für diese Einstellung aktiviert ist, werden Aufträge ausgeführt, selbst wenn die ID und PIN nicht eingegeben sind.
Verwaltung des Geräts Festlegen einer PIN für Remote UI 2529-043 Sie können eine PIN für den Zugriff auf Remote UI festlegen. Alle Benutzer verwenden eine gemeinsame PIN. ● Wenn die Verwaltung per Abteilungs-IDs aktiviert ist, ist die Einstellung hier nicht erforderlich. der Verwaltung per Abteilungs-IDs(P.
Verwaltung des Geräts Verwenden des Bedienfelds ● Die Einstellungen für die PIN für den Zugriff auf die Remote UI können auch über auf dem Bildschirm Startseite vorgenommen werden. (P. 425) Wenn die initialisiert werden ● Die Zugriffs-PIN für Remote UI wird ebenfalls initialisiert. Nach einer Initialisierung setzen Sie die PIN zurück. (P. 428) LINKS Festlegen von Zugriffsrechten(P.
Verwaltung des Geräts Konfigurieren der Netzwerksicherheitseinstellungen 2529-044 Böswillige Angriffe können bei autorisierten Anwendern zu unerwarteten Verlusten führen, wenn Daten bei der Übermittlung über ein Netzwerk per Sniffing oder Spoofing abgefangen und manipuliert werden. Das Gerät unterstützt die folgenden Funktionen, mit denen Sie für mehr Sicherheit sorgen und wertvolle Informationen vor solchen Angriffen schützen können.
Verwaltung des Geräts IPSec-Kommunikation Während TLS nur Daten verschlüsselt, die in einer bestimmten Anwendung wie einem Webbrowser oder einer E-Mail-Anwendung verwendet werden, verschlüsselt IPSec ganze IP-Pakete oder deren Nutzdaten. Somit stellt IPSec ein flexibleres Sicherheitssystem als TLS bereit. Konfigurieren von IPSec-Einstellungen(P. 260) IEEE 802.1X-Authentisierung IEEE 802.
Verwaltung des Geräts Einschränken der Kommunikation mithilfe von Firewalls 2529-045 Ohne ausreichende Sicherheitsmaßnahmen können unbefugte Dritte auf Computer und andere Kommunikationsgeräte in einem Netzwerk zugreifen. Sie können unbefugte Zugriffe unterbinden, indem Sie Einstellungen für den Paketfilter festlegen, sodass die Kommunikation nur noch mit den Geräten möglich ist, die die angegebenen IP- oder MAC-Adressen aufweisen. Festlegen von IP-Adressen für Firewall-Einstellungen(P.
Verwaltung des Geräts Festlegen von IP-Adressen für Firewall-Einstellungen 2529-046 Sie können die Kommunikation nur mit Geräten mit bestimmten IP-Adressen zulassen oder Geräte mit bestimmten IPAdressen blockieren. Dazu können Sie eine einzelne IP-Adresse oder einen Bereich von IP-Adressen angeben. ● Weitere Informationen über die Grundfunktionen, die bei der Konfiguration des Geräts über die Remote UI auszuführen sind, finden Sie unter Einstellen von Menüoptionen über Remote UI(P. 286) .
Verwaltung des Geräts 1 Aktivieren Sie das Kontrollkästchen [Filter verwenden], und klicken Sie auf das Optionsfeld [Zurückweisen] oder [Zulassen] für die [Standardrichtlinie]. [Filter verwenden] Aktivieren Sie das Kontrollkästchen, um die Kommunikation zu beschränken. Deaktivieren Sie das Kontrollkästchen, um die Beschränkung aufzuheben. [Standardrichtlinie] Wählen Sie die Vorbedingung, um die Kommunikation von anderen Geräten mit diesem Gerät zuzulassen oder abzulehnen.
Verwaltung des Geräts 3 6 Klicken Sie auf [OK]. Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds ● Sie können die IP-Adressfilterung auch über auf dem Bildschirm Startseite aktivieren oder deaktivieren. (P. 328) (P. 329) LINKS Festlegen von MAC-Adressen für Firewall-Einstellungen(P.
Verwaltung des Geräts Festlegen von MAC-Adressen für Firewall-Einstellungen 2529-047 Sie können die Kommunikation nur mit Geräten mit bestimmten MAC-Adressen zulassen oder Geräte mit bestimmten MAC-Adressen blockieren, jedoch andere Kommunikationen zulassen. Diese Funktion steht nicht zur Verfügung, wenn das Gerät mit einem Wireless LAN verbunden ist.
Verwaltung des Geräts 1 Aktivieren Sie das Kontrollkästchen [Filter verwenden], und klicken Sie auf das Optionsfeld [Zurückweisen] oder [Zulassen] für die [Standardrichtlinie]. [Filter verwenden] Aktivieren Sie das Kontrollkästchen, um die Kommunikation zu beschränken. Deaktivieren Sie das Kontrollkästchen, um die Beschränkung zu deaktivieren. [Standardrichtlinie] Wählen Sie die Vorbedingung, um die Kommunikation anderer Geräte mit diesem Gerät zuzulassen oder abzulehnen.
Verwaltung des Geräts 3 6 Klicken Sie auf [OK]. Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds ● Sie können die MAC-Adressfilterung auch über auf dem Bildschirm Startseite aktivieren oder deaktivieren. (P. 329) LINKS Festlegen von IP-Adressen für Firewall-Einstellungen(P.
Verwaltung des Geräts Ändern von Portnummern 2529-048 Ports fungieren als Endpunkte für die Kommunikation mit anderen Geräten. Üblicherweise werden für die wichtigsten Protokolle standardisierte Portnummern verwendet, aber Geräte, die diese Portnummern verwenden, sind anfällig für Angriffe, weil diese Portnummern allgemein bekannt sind. Zum Verbessern der Sicherheit kann Ihr Netzwerkadministrator die Portnummern ändern.
Verwaltung des Geräts Einstellen eines Proxyservers 2529-049 Ein Proxyserver (bzw. HTTP-Proxyserver) ist ein Computer oder eine Software, die die HTTP-Kommunikation für andere Geräte abwickelt, insbesondere bei der Kommunikation mit Ressourcen außerhalb des Netzwerks, also beispielsweise beim Browsen auf Websites. Die Clientgeräte stellen die Verbindung zum externen Netzwerk über den Proxyserver her und kommunizieren nicht direkt mit den externen Ressourcen.
Verwaltung des Geräts Aktivieren Sie das Kontrollkästchen, wenn Sie den angegebenen Proxyserver bei der Kommunikation mit einem HTTP-Server verwenden wollen. [HTTP-Adresse Proxy-Server] Geben Sie die Adresse des Proxyservers ein. Geben Sie je nach Umgebung die IP-Adresse oder den Hostnamen an. [HTTP-Portnummer Proxy-Server] Ändern Sie bei Bedarf die Portnummer. [Proxy in gleicher Domäne verw.
Verwaltung des Geräts Konfigurieren des Schlüssels und des Zertifikats für TLS 2529-04A Mit TLS (Transport Layer Security) können Sie die Kommunikation zwischen dem Gerät und einem Webbrowser auf dem Computer verschlüsseln. TLS ist ein Protokoll für die Verschlüsselung der über ein Netzwerk gesendeten oder empfangenen Daten. TLS muss aktiviert sein, wenn Sie über Remote UI die Einstellungen für IPSec (Methode PreShared Key), die IEEE 802.1X-Authentisierung (TTLS/PEAP) oder SNMPv3 festlegen.
Verwaltung des Geräts 7 Klicken Sie auf [Bearbeiten]. 8 Aktivieren Sie das Kontrollkästchen [TLS verwenden], und klicken Sie auf [OK]. 9 Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds ● Sie können die Kommunikation mit TLS-Verschlüsselung auch über auf dem Bildschirm Startseite aktivieren oder deaktivieren. /(P.
Verwaltung des Geräts Generieren einer Schlüssel- und Zertifikats-Signieranforderung (CSR)(P. 255) Registrieren des Schlüssels und des Zertifikats für die Netzwerkkommunikation(P. 258) Konfigurieren von IPSec-Einstellungen(P. 260) Konfigurieren der IEEE 802.1X-Authentisierungseinstellungen(P. 267) Überwachen und Steuern des Geräts mit SNMP(P.
Verwaltung des Geräts Generieren von Schlüssel und Zertifikat für die Netzwerkkommunikation 2529-04C Sie können mit dem Gerät einen Schlüssel und ein Zertifikat generieren, wenn dies für die verschlüsselte Kommunikation über TLS (Transport Layer Security) erforderlich ist. Sie können TLS verwenden, wenn Sie über Remote UI auf das Gerät zugreifen. Selbstsignierte Zertifikate werden zusammen mit dem in "Netzwerkkommunikation" generierten Schlüssel und Zertifikat verwendet.
Verwaltung des Geräts [Einstellungen Schlüssel] [Schlüsselname] Geben Sie alphanumerische Zeichen als Namen für den Schlüssel ein. Geben Sie einen Namen ein, den Sie später in einer Liste leicht wiederfinden können. [Signaturalgorithmus] Wählen Sie den Signaturalgorithmus aus der Dropdown-Liste aus. [Schlüsselalgorithmus] Wählen Sie den Schlüsselgenerierungsalgorithmus unter [RSA] oder [ECDSA], wählen Sie dann die Schlüssellänge aus der Dropdown-Liste aus.
Verwaltung des Geräts 7 Klicken Sie auf [OK]. ● Das Generieren eines Schlüssels und Zertifikats kann einige Zeit in Anspruch nehmen. ● Nachdem ein Schlüssel und ein Zertifikat generiert wurde, wird es automatisch im Gerät registriert. LINKS Registrieren des Schlüssels und des Zertifikats für die Netzwerkkommunikation(P. 258) Konfigurieren des Schlüssels und des Zertifikats für TLS(P. 249) Konfigurieren von IPSec-Einstellungen(P.
Verwaltung des Geräts Generieren einer Schlüssel- und ZertifikatsSignieranforderung (CSR) 2529-04E Da die am Gerät generierten Zertifikate über keine CA-Signatur verfügen, kann je nach den Geräten, mit denen es kommuniziert, ein Kommunikationsfehler auftreten. Damit die Zertifizierungsstelle das Zertifikat mit der CA-Signatur ausstellen kann, müssen Sie Daten von CSR (Zertifikats-Signieranforderung) anfordern, die der Administrator über Remote UI generieren kann.
Verwaltung des Geräts [Einstellungen Schlüssel] [Schlüsselname] Geben Sie alphanumerische Zeichen als Namen für den Schlüssel ein. Geben Sie einen Namen ein, den Sie später in einer Liste leicht wiederfinden können. [Signaturalgorithmus] Wählen Sie den Signaturalgorithmus aus der Dropdown-Liste aus. [Schlüsselalgorithmus] Wählen Sie den Schlüsselgenerierungsalgorithmus unter [RSA] oder [ECDSA], wählen Sie dann die Schlüsselstärke aus der Dropdown-Liste aus.
Verwaltung des Geräts ● Ein Dialogfeld zum Speichern der Datei wird angezeigt. Wählen Sie aus, wo die Datei gespeichert werden soll, und klicken Sie auf [Speichern]. ➠ Die CSR-Datei wird auf dem Computer gespeichert. 9 Hängen Sie die gespeicherte Datei an, und übergeben Sie die Anforderung an die Zertifizierungsstelle.
Verwaltung des Geräts Registrieren des Schlüssels und des Zertifikats für die Netzwerkkommunikation 2529-04F Sie können den Schlüssel und das Zertifikat sowie das CA-Zertifikat bei einer Zertifizierungsstelle (CA) für das Gerät erhalten. Sie können den erhaltenen Schlüssel, die Zertifikatsdatei und die CA-Zertifikatsdatei mit Remote UI speichern und im Gerät registrieren.
Verwaltung des Geräts 5 Klicken Sie auf [Installieren]. Löschen des Schlüssels und der Zertifikatsdatei oder des CA-Zertifikats ● Klicken Sie rechts neben der zu löschenden Datei auf [Löschen] 6 klicken Sie auf [OK]. Klicken Sie auf [Durchsuchen], wählen Sie die zu installierende Datei aus, und klicken Sie auf [Installation starten]. ➠ Der Schlüssel und das Zertifikat oder Zertifizierungsstellenzertifikat wird auf dem Gerät von einem Computer installiert.
Verwaltung des Geräts Konfigurieren von IPSec-Einstellungen 2529-04H Internet Protocol Security (IPSec oder IPsec) ist eine Protokollsuite für die Verschlüsselung der über Netzwerke und Internet-Netzwerke übermittelten Daten. Während TLS nur Daten verschlüsselt, die in einer bestimmten Anwendung wie einem Webbrowser oder einer E-Mail-Anwendung verwendet werden, verschlüsselt IPSec ganze IP-Pakete oder die Nutzdaten von IP-Paketen und stellt somit ein flexibleres Sicherheitssystem bereit.
Verwaltung des Geräts ● Weitere Informationen über die Grundfunktionen, die bei der Konfiguration des Geräts über die Remote UI auszuführen sind, finden Sie unter Einstellen von Menüoptionen über Remote UI(P. 286) . 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI(P. 278) Klicken Sie auf der Portalseite auf [Einstellungen/Registrierung]. Remote UI- Bildschirm(P. 279) 3 Wählen Sie [Netzwerkeinstellungen] 4 Klicken Sie auf [Bearbeiten].
Verwaltung des Geräts [Lokale Adresse] Klicken Sie auf das Optionsfeld für den IP-Adresstyp dieses Geräts, auf den die Richtlinie angewendet werden soll. [Alle IP-Adressen] Wählen Sie diese Einstellung, wenn IPSec für alle IP-Pakete verwendet werden soll. [IPv4-Adresse] Wählen Sie diese Einstellung, wenn IPSec für alle an die und von der IPv4-Adresse des Geräts gesendeten IP-Pakete verwendet werden soll.
Verwaltung des Geräts Eingeben von IP-Adressen Beschreibung Eingeben einer Adresse Beispiel IPv4: Verwenden Sie Punkte als Trennzeichen für die Zahlen. 192.168.0.10 IPv6: fe80::10 Verwenden Sie Doppelpunkte als Trennzeichen für die alphanumerischen Zeichen. Angeben eines Adressbereichs Fügen Sie zwischen den Adressen einen Bindestrich ein. 192.168.0.10-192.168.0.20 [Einstellungen Subnetz] Wenn Sie manuell IPv4-Adressen festlegen, können Sie den Bereich über die Subnetmaske ausdrücken.
Verwaltung des Geräts Wählen Sie [Methode Pre-Shared Key] oder [Methode digitale Signatur] als Methode für die Authentisierung des Geräts. Sie müssen TLS für Remote UI aktivieren, bevor Sie [Methode Pre-Shared Key] auswählen. Sie müssen den Schlüssel und das Zertifikat generieren oder installieren, bevor Sie [Methode digitale Signatur] auswählen ( Konfigurieren des Schlüssels und des Zertifikats für TLS(P. 249) ). [Gültig für] Legen Sie fest, wie lange eine IKE-SA-Sitzung (ISAKMP-SA) dauert.
Verwaltung des Geräts [PFS verwenden] Aktivieren Sie das Kontrollkästchen, um PFS (Perfect Forward Secrecy) für IPSec-Sitzungsschlüssel zu aktivieren. Die Aktivierung von PFS verbessert die Sicherheit, erhöht jedoch auch den Kommunikationsaufwand. Vergewissern Sie sich, dass PFS auch für die anderen Geräte aktiviert ist. [Durch Zeit definieren]/[Durch Format definieren] Legen Sie die Bedingungen für die Beendigung einer IPSec-SA-Sitzung fest. IPSec-SA wird als Kommunikationstunnel verwendet.
Verwaltung des Geräts Bearbeiten einer Richtlinie ● Klicken Sie auf den entsprechenden Textlink unter [Name Richtlinie], um den Bearbeitungsbildschirm anzuzeigen. Löschen von Richtlinien ● Klicken Sie rechts neben dem Namen der zu löschenden Richtlinie auf [Löschen] 13 klicken Sie auf [OK]. Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
Verwaltung des Geräts Konfigurieren der IEEE 802.1XAuthentisierungseinstellungen 2529-04J Das Gerät kann als Client mit einem 802.1X-Netzwerk verbunden werden. Ein 802.1X-Netzwerk besteht normalerweise aus einem RADIUS-Server (Authentisierungsserver), einem LAN-Switch (Authenticator) und Clientgeräten mit Authentisierungssoftware (Supplicants). Wenn ein Gerät versucht, eine Verbindung zu einem 802.
Verwaltung des Geräts 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI(P. 278) Klicken Sie auf der Portalseite auf [Einstellungen/Registrierung]. Remote UI- Bildschirm(P. 279) 3 Wählen Sie [Netzwerkeinstellungen] 4 Klicken Sie auf [Bearbeiten]. 5 Aktivieren Sie das Kontrollkästchen [IEEE 802.1X verwenden], und geben Sie den [Einstellungen IEEE 802.1X]. Login-Namen in das Textfeld [Login-Name] ein. [IEEE 802.
Verwaltung des Geräts 2 Klicken Sie rechts neben dem für die Clientauthentisierung zu verwendenden Schlüssel und Zertifikat auf [Standardschlüssel registrieren]. Anzeigen von Details zu Zertifikaten ● Sie können die Details zu dem Zertifikat anzeigen oder das Zertifikat verifizieren, indem Sie unter [Schlüsselname] auf den entsprechenden Textlink oder auf das Zertifikatsymbol klicken. Einstellen von TTLS/PEAP 1 Aktivieren Sie das Kontrollkästchen [TTLS verwenden] oder [PEAP verwenden].
Verwaltung des Geräts 8 Starten Sie das Gerät neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds ● Sie können die IEEE 802.1X-Authentisierung auch über auf dem Bildschirm Startseite aktivieren oder deaktivieren. /(P. 328) LINKS Konfigurieren des Schlüssels und des Zertifikats für TLS(P.
Verwaltung des Geräts Einschränken der Gerätefunktionen 2529-04K Einige der Funktionen des Geräts werden unter Umständen kaum verwendet oder bieten sich für eine missbräuchliche Verwendung an. Die Funktionen des Geräts können daher aus Sicherheitsgründen teilweise oder komplett deaktiviert werden.
Verwaltung des Geräts Einschränken des Druckvorgangs von einem Computer 2529-04L Sie können das Risiko von Informationslecks wesentlich reduzieren, wenn Sie den Druck von Dokumenten von einem Computer aus auf Geschützten Druck beschränken ( Ein durch eine PIN geschütztes Dokument drucken (Geschützter Druck)(P. 176) ).
Verwaltung des Geräts Einschränken von USB-Funktionen 2529-04R Per USB lassen sich Peripheriegeräte problemlos anschließen und Daten einfach speichern oder verschieben, aber ohne angemessene Verwaltung können über USB auch ungewollt Informationen preisgegeben werden. Seien Sie im Umgang mit USB-Speichergeräten besonders vorsichtig. Dieser Abschnitt beschreibt, wie die Verbindung über den USB-Anschluss des Geräts beschränkt wird und wie die Verwendung von USB-Speichergeräten verhindert wird.
Verwaltung des Geräts Schwarzweiß LCD-Modell Starten Sie das Gerät neu LINKS Drucken von einem USB-Speichergerät (Speichermedium Druck)(P.
Verwaltung des Geräts Deaktivieren der HTTP-Kommunikation 2529-04S HTTP wird für die Kommunikation über das Netzwerk verwendet, also beispielsweise beim Zugriff auf das Gerät über Remote UI. Wenn Sie eine USB-Verbindung verwenden oder HTTP aus einem anderen Grund nicht verwenden, können Sie HTTP deaktivieren und so böswillige Angriffe Dritter über den nicht genutzten HTTP-Port blockieren.
Verwaltung des Geräts Deaktivieren von Remote UI 2529-04U Remote UI ist nützlich, wenn Sie die Geräteeinstellungen über einen Webbrowser auf einem Computer festlegen können. Das Gerät muss mit einem Computer im Netzwerk verbunden sein, damit Sie Remote UI verwenden können. Wenn das Gerät über USB mit einem Computer verbunden ist oder wenn Sie Remote UI nicht benötigen, können Sie Remote UI deaktivieren und so das Risiko verringern, dass ein böswilliger Dritter das Gerät über das Netzwerk fernsteuert.
Verwaltung des Geräts Verwalten des Geräts über einen Computer (Remote UI) 2529-04W Wenn Sie das Gerät über einen Webbrowser fernbedienen, können Sie die zu druckenden Dokumente oder den Status des Geräts überprüfen. Sie können auch einige Einstellungen für das Gerät vornehmen. Das ist möglich, ohne dass Sie Ihren Schreibtisch verlassen, was die Systemverwaltung einfacher macht. Weitere Informationen über die Systemanforderungen für Remote UI finden Sie unter Systemumgebung(P. 545) .
Verwaltung des Geräts Starten von Remote UI 2529-04X Für die Remotebedienung müssen Sie die IP-Adresse des Geräts in einen Webbrowser eingeben und Remote UI starten. Überprüfen Sie im Vorfeld die beim Gerät eingestellte IP-Adresse ( Anzeigen von Netzwerkeinstellungen(P. 47) ). Wenn Sie Fragen haben, wenden Sie sich an Ihren Netzwerkadministrator. 1 Starten Sie den Webbrowser. 2 Geben Sie "http:///" in das Adressfeld ein, und drücken Sie die Taste [EINGABE].
Verwaltung des Geräts automatisch so eingestellt, dass Dokumente auf der Grundlage von Informationen wie beispielsweise dem Namen Ihres Computers oder dem Computer-Anmeldenamen gedruckt werden. [PIN für den Zugriff auf die Remote UI] Wenn [PIN für den Zugriff auf die Remote UI] eingestellt ist, geben Sie die PIN ein. Remote UI(P. 235) Festlegen einer PIN für Wenn die Verwaltung per Abteilungs-IDs aktiviert ist Geben Sie die passende ID in [Abteilungs-ID] und die PIN in [PIN] ein. Abteilungs-IDs(P.
Verwaltung des Geräts [Informationen Verbrauchsmaterialien] Zeigt Informationen zum Papier und zu der in den Tonerpatronen verbliebenen Tonermenge an. [Support-Link] Zeigt den unter [Lizenz/Andere] in [Support-Link] angegebenen Support Link an. Aktualisierungssymbol Aktualisiert die zurzeit angezeigte Seite. [Language] Wählt die Anzeigesprache, die für Remote UI-Bildschirme verwendet wird. [Logout] Damit melden Sie sich bei Remote UI ab. Die Login-Seite wird angezeigt.
Verwaltung des Geräts Überprüfen des Status und der Logs 2529-04Y Anzeigen des aktuellen Status von Druckdokumenten(P. 281) Überprüfen von Statistiken zu Dokumenten(P. 282) Überprüfen von Fehlerinformationen(P. 282) Überprüfen von Verbrauchsmaterial(P. 282) Anzeigen von technischen Daten des Geräts(P. 283) Anzeigen der Systemmanager-Informationen(P. 283) Anzeigen des Zählers für die Druckfunktion(P. 284) Überprüfen des Verlaufs von Tonerpatronen(P.
Verwaltung des Geräts Überprüfen von Statistiken zu Dokumenten Die Auftragsprotokolle von Drucken, oder Empfangen (RX) werden angezeigt. Melden Sie sich bei Remote UI an ( [Auftragslog] Starten von Remote UI(P. 278) ) [Statusmonitor/Abbruch] Überprüfen von Fehlerinformationen Wenn ein Fehler auftritt, können Sie diese Seite aufrufen, indem Sie auf der Portalseite (Hauptseite) auf die Meldung unter [Fehlerinformationen] klicken. Remote UI-Bildschirm(P.
Verwaltung des Geräts Melden Sie sich bei Remote UI an ( [Verbrauchsmaterial] Starten von Remote UI(P. 278) ) [Statusmonitor/Abbruch] Anzeigen von technischen Daten des Geräts Die maximale Druckgeschwindigkeit sowie die Gerätefunktionen werden angezeigt. Melden Sie sich bei Remote UI an ( [Geräte-Eigenschaften] Starten von Remote UI(P. 278) ) [Statusmonitor/Abbruch] Anzeigen der Systemmanager-Informationen Informationen zu dem Gerät und dem Systemmanager werden angezeigt.
Verwaltung des Geräts Anzeigen des Zählers für die Druckfunktion Die Gesamtzahl der gedruckten Seiten wird angezeigt. Melden Sie sich bei Remote UI an ( [Zähler prüfen] Starten von Remote UI(P. 278) ) [Statusmonitor/Abbruch] Überprüfen des Verlaufs von Tonerpatronen Sie können den Nutzungsverlauf von Tonerpatronen und andere Aufzeichnungen überprüfen. Die Anzeige kann für jede Farbe von Tonerpatronen umgeschaltet werden. Melden Sie sich bei Remote UI an ( [Log Patrone] Starten von Remote UI(P.
Verwaltung des Geräts LINKS Remote UI-Bildschirm(P.
Verwaltung des Geräts Einstellen von Menüoptionen über Remote UI 2529-050 Über Remote UI können Sie die verschiedenen Einstellungen für das Gerät ändern. Die meisten Einstellungen können auch am Gerät selbst festgelegt werden, aber manche Einstellungen stehen nur in Remote UI zur Verfügung. In diesem Abschnitt wird der grundlegende Funktionsablauf zur Änderung der Geräteeinstellungen über die Remote UI beschrieben.
Verwaltung des Geräts 5 Klicken Sie auf [Bearbeiten]. 6 Legen Sie die nötigen Einstellungen fest. 7 Klicken Sie auf [OK].
Verwaltung des Geräts 8 Starten Sie das Gerät bei Bedarf neu. ● Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. ● Weitere Informationen, ob Sie das Gerät neu starten müssen, finden Sie in der Nachricht auf dem Bearbeitungsbildschirm.
Verwaltung des Geräts Importieren bzw. Exportieren der Einstellungsdaten 2529-051 Geräteeinstellungen können auf Ihrem Computer gespeichert (exportiert) werden. Daten, die auf Ihrem Computer gespeichert sind, können auch im Gerät registriert (importiert) werden. Daten, die von diesem Gerät exportiert wurden, können in ein anderes Gerät des gleichen Modells importiert werden. So können Sie ganz einfach eine Vielzahl von Einstellungsdaten auf mehrere Geräte kopieren.
Verwaltung des Geräts 4 Legen Sie das Verschlüsselungspasswort fest. [Passwort-Verschlüsselung] Geben Sie mit alphanumerischen Zeichen ein Passwort ein, um die Exportdaten zu verschlüsseln. Geben Sie dasselbe Passwort unter [Bestätigen] ein. Sie müssen für den Export der Daten ein Verschlüsselungspasswort festlegen. ● Das Passwort wird beim Einstellungsdaten(P. 290) 5 6 Importieren der exportierten Daten benötigt. Importieren der Klicken Sie auf [Exportstart].
Verwaltung des Geräts [Dateipfad] Klicken Sie auf [Durchsuchen] und wählen Sie die Datei aus. Sie können nur eine Informationsdatei für die Gerätekonfiguration (*.dcm) importieren. [Passwort-Entschlüsselung] Geben Sie das Passwort ein, das beim Export der Einstellungen festgelegt wurde. 5 Klicken Sie auf [Importstart]. 6 Klicken Sie auf [OK]. ➠ Die ausgewählten Einstellungsdaten werden in das Gerät geladen. 7 Klicken Sie auf [OK].
Verwaltung des Geräts Aktualisieren der Firmware 2529-052 Wählen Sie je nach Installationsart des Geräts die Methode zur Aktualisierung der Firmware.
Verwaltung des Geräts 2 Wenn ein Lizenzbildschirm erscheint, wählen Sie . 3 Wählen Sie . ➠ Sobald die Firmware-Aktualisierung abgeschlossen ist, startet das Gerät automatisch neu. ● Schalten Sie das Gerät nicht AUS, während der Neustart in Ausführung ist. ◼ Schwarzweiß LCD-Modell 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie . Bildschirm Startseite(P. 107) ● Wenn der Anmeldebildschirm erscheint, geben Sie die korrekte ID und PIN ein.
Verwaltung des Geräts Aktualisieren über einen Computer Wenn Sie die neueste Firmware-Version von der Canon-Website heruntergeladen haben, verwenden Sie das Dienstprogramm "User Support Tool", um die Firmware über einen Computer zu aktualisieren. Näheres zur Durchführung der Firmware-Aktualisierung über einen Computer finden Sie in "Betriebsanleitung für BenutzerSupportsoftware" aus dem Lieferumfang der Firmware.
Verwaltung des Geräts Initialisieren von Einstellungen 2529-053 Sie können die folgenden Einstellungen zurücksetzen: Menü initialisieren(P. 295) Schlüssel und Zertifikat initialisieren(P. 295) Initialisieren aller Daten und Einstellungen(P. 296) Menü initialisieren Sie können die Einstellungen des Geräts auf die werkseitigen Standardwerte zurücksetzen ( Liste der Menüeinstellungen(P. 298) ).
Verwaltung des Geräts Initialisieren aller Daten und Einstellungen Ermöglicht die Zurücksetzung aller Daten und Geräteeinstellungen, einschließlich der Logs, auf die werkseitigen Standardwerte. Das verhindert die Veröffentlichung empfindlicher Daten beim Austausch oder der Entsorgung des Geräts. Das Gerät wird automatisch neu gestartet, sobald der Initialisierungsvorgang beendet ist. ● Achten Sie vor der Initialisierung darauf, dass keine Dokumente bearbeitet oder darauf warten, bearbeitet zu werden.
Liste der Menüeinstellungen Liste der Menüeinstellungen Liste der Menüeinstellungen .................................................................................................................. 298 ................................................................................................................................................... 299 ......................................................................................................................
Liste der Menüeinstellungen Liste der Menüeinstellungen 2529-054 Sie können das Gerät basierend auf Ihrer Umgebung und Ihren Anforderungen anpassen, indem Sie die in diesem Kapitel beschriebenen Einstellungen konfigurieren. Wählen Sie für den Start der Konfiguration auf dem Bildschirm Startseite ( Bildschirm Startseite(P. 107) ). In diesem Abschnitt wird beschrieben, was das jeweilige Element im Einstellungsmenü konfigurieren kann. (P.
Liste der Menüeinstellungen 2529-055 Element Beschreibung (P. 300) In diesem Abschnitt werden die Einstellungen für die Anzeige des Displays beschrieben. (P. 304) In diesem Abschnitt werden die USB-Tastatureinstellungen beschrieben. (P. 305) In diesem Abschnitt werden die Timer- und Energieeinstellungen beschrieben. (P. 312) In diesem Abschnitt werden die Netzwerkeinstellungen beschrieben.
Liste der Menüeinstellungen 2529-056 Zu allen Einstellungen zur Anzeige des Displays ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 300) /(P. 300) (P. 300) (P. 301) (P. 302) /(P.
Liste der Menüeinstellungen / / / / / / / / / / / <Čeština>/ / <Русский>/ / <Ελληνικά>/ / / / / <Български>/ / / <中文(简体)>/
Liste der Menüeinstellungen Wählen Sie eine Sprache Wählen Sie die Maßeinheit. Zoll> oder /
Liste der Menüeinstellungen unter Geben Sie die Tonerstufe ein Wählen Sie Schwarzweiß LCD-Modell Geben Sie die Tonerstufe unter 303
Liste der Menüeinstellungen 2529-057 Geben Sie das Layout einer USB-Tastatur an, wenn sie an das Gerät angeschlossen ist. Die Standardeinstellung ist mit einem Kreuz ( ) markiert.
Liste der Menüeinstellungen 2529-058 Alle auf Timer und Energie bezogenen Einstellungen sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 305) (P. 306) (P. 306) (P. 307) (P. 307) (P. 308) (P.
Liste der Menüeinstellungen Legen Sie Datums- und Uhrzeitstandard der Region fest, in der das Gerät installiert werden soll. Wählen Sie die Zeitzone. Wenn Sie die Einstellung für die Zeitzone ändern, werden die in eingestellten Werte entsprechend geändert. Einstellen von Datum und Uhrzeit(P.
Liste der Menüeinstellungen Wählen Sie das Datumsformat Wählen Sie das 12- oder 24-Stunden-Format für die Uhrzeitanzeige.
Liste der Menüeinstellungen Rückst.> unter Geben Sie die Zeit unter Schwarzweiß LCD-Modell
Liste der Menüeinstellungen 0 (Das automatische Abschalten ist deaktiviert.) 1 bis 4 bis 8 (Std.
Liste der Menüeinstellungen (0:00 bis 12:59 AM/PM) Schwarzweiß LCD-Modell (0:00 bis 23:59) Die automatische Gradationsjustage (Schnelljustage) kann täglich zu einem festgelegten Zeitpunkt durchgeführt werden. Legen Sie die Zeit für die automatische Schnelljustage in dieser Option fest.
Liste der Menüeinstellungen (0:00 bis 12:59 AM/PM) Schwarzweiß LCD-Modell (0:00 bis 23:59) 311
Liste der Menüeinstellungen 2529-059 Alle auf das Netzwerk bezogenen Einstellungen sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 312) (P. 312) (P. 314) (P. 315) (P. 324) /(P. 326) /(P.
Liste der Menüeinstellungen Wireless LAN-Router, die auf das Gerät zugreifen können, werden automatisch lokalisiert, sodass Sie sie aus der Liste auswählen können. Sie müssen manuell den Netzwerkschlüssel, wie einen WEP-Schlüssel oder einen PSK, eingeben. Konfiguration der Verbindung durch Auswahl eines Wireless LAN-Routers(P. 33) Wählen Sie diese Einstellung, wenn Sie zur Konfiguration der Wireless LAN-Verbindung manuell eine SSID eingeben möchten.
Liste der Menüeinstellungen *1 Legen Sie fest, ob die Verbindung direkt erfolgen soll. Wenn diese Funktion aktiviert ist, kann auch in einer Umgebung ohne Access Point oder Wireless LAN-Router eine direkte Verbindung mit dem Gerät hergestellt werden. Herstellung einer direkten Verbindung (Zugriffspunktmodus)(P.
Liste der Menüeinstellungen Touchpanel-Modell
Liste der Menüeinstellungen *1 : 0.0.0.0 : 0.0.0.0 : 0.0.0.0 Wenn DHCP aktiviert ist, wählen Sie mithilfe dieser Einstellungen aus, ob die optionalen DHCP-Funktionen verwendet werden sollen, um die DNS-Serveradresse oder den Domänennamen abzurufen. Konfigurieren von DNS(P.
Liste der Menüeinstellungen Aktivieren oder deaktivieren Sie die zustandshafte Adresse, die über DHCPv6 bezogen wird.
Liste der Menüeinstellungen Wählen Sie, ob die DNS-Einträge dynamisch aktualisiert werden sollen, sobald die IP-Adresse des Geräts geändert wird. 0 bis 24 bis 48 (Std.
Liste der Menüeinstellungen / (Schwarzweiß LCD-Modell) Legen Sie die Einstellungen für die Verwendung des Geräts in einem IPv4-Netzwerk fest. Konfigurieren Sie die IP-Adresse, die in einem TCP/IP-Netzwerk zum Identifizieren von Geräten wie Computern oder Druckern dient. Einstellen der IPv4-Adresse(P. 41) *1 : 0.0.0.
Liste der Menüeinstellungen Legen Sie die Einstellungen für die Verwendung von DNS-Funktionen ohne DNS-Server fest. Konfigurieren von DNS(P. 65) Wenn DHCP aktiviert ist, wählen Sie mithilfe dieser Einstellungen aus, ob die optionalen DHCP-Funktionen verwendet werden sollen, um die DNS-Serveradresse oder den Domänennamen abzurufen. Konfigurieren von DNS(P.
Liste der Menüeinstellungen Aktivieren oder deaktivieren Sie die zustandshafte Adresse, die über DHCPv6 abgerufen wird. von IPv6-Adressen(P. 44) Einstellen Legen Sie die Einstellungen für DNS (Domain Name System) fest, womit ein Hostname für die IPAdressauflösung bereitgestellt wird. Konfigurieren von DNS(P.
Liste der Menüeinstellungen Wenn DHCP aktiviert ist, wählen Sie mithilfe dieser Einstellungen aus, ob die optionalen DHCP-Funktionen verwendet werden sollen, um die DNS-Serveradresse oder den Domänennamen abzurufen. Konfigurieren von DNS(P.
Liste der Menüeinstellungen Aktivieren oder deaktivieren Sie die automatische Suche und das Abrufen von Informationen vom Drucker oder Scanner über das WSD-Protokoll. Konfigurieren von Druckprotokollen und WSD-Funktionen(P.
Liste der Menüeinstellungen Wählen Sie oder Starten Sie das Gerät neu Ändern Sie die Portnummern für Protokolle je nach der Netzwerkumgebung. Portnummern(P.
Liste der Menüeinstellungen Touchpanel-Modell Wählen Sie oder unter Starten Sie das Gerät neu Schwarzweiß LCD-Modell Wählen Sie oder Starten Sie das Gerät neu Aktivieren oder deaktivieren Sie SNMPv3.
Liste der Menüeinstellungen Wählen Sie oder Starten Sie das Gerät neu Geben Sie an, ob den erweiterten Festlegungen (RFC2790) des Protokolls entsprochen werden soll, wenn der Gerätestatus über die SNMP-kompatible Software überwacht wird. Touchpanel-Modell Wählen Sie oder unter
Liste der Menüeinstellungen / Wählen Sie oder Sie das Gerät neu Starten ● Wenn Sie ausgewählt haben, können Sie in einigen Fällen keine Verbindung über die Geräteverwaltungssoftware oder den Treiber herstellen. / Legen Sie eine Wartezeit für die Netzwerkverbindung fest.
Liste der Menüeinstellungen / *1*2 Aktivieren oder deaktivieren Sie die IEEE 802.1X-Authentisierung. Authentisierungseinstellungen(P. 267) Konfigurieren der IEEE 802.1X- /
Liste der Menüeinstellungen Aktivieren oder deaktivieren Sie Einstellungen für die Filterung von Paketen, die an Geräte mit bestimmten IPv6Adressen gesendet bzw. von diesen empfangen werden. Festlegen von IP-Adressen für FirewallEinstellungen(P.
Liste der Menüeinstellungen Wählen Sie oder Wählen Sie oder Starten Sie das Gerät neu Aktivieren oder deaktivieren Sie Google Cloud Print. Registrieren des Geräts bei Google Cloud Print(P. 219) / /
Liste der Menüeinstellungen Sie das Gerät neu Wählen Sie oder Starten Setzt die Netzwerkeinstellungen auf die werkseitigen Standardwerte zurück. 331 (P.
Liste der Menüeinstellungen 2529-05A Zu allen Einstellungen zu USB ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Legen Sie fest, ob die Verwendung des USB-Anschlusses oder eines USB-Speichergeräts aktiviert oder deaktiviert werden soll. Aktivieren oder deaktivieren Sie den USB-Anschluss, über den das Gerät an einen Computer angeschlossen werden kann.
Liste der Menüeinstellungen 2529-05C Alle auf die Bedienbarkeit bezogenen Einstellungen, wie beispielsweise Umkehren von Bildschirmfarben oder Anzeigedauer von Meldungen, sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 333) (P. 333) (P. 334) (P. 334) (P. 334) (P.
Liste der Menüeinstellungen * Stellen Sie den Kontrast (Unterschied zwischen hellen und dunklen Bereichen) des Displays zur Anpassung des Geräts an den Aufstellort ein. Sieben Stufen Passen Sie den Kontrast an Legen Sie das Intervall fest, in dem zwei verschiedene Meldungen abwechselnd angezeigt werden. 1 bis 2 bis 5 (Sek.
Liste der Menüeinstellungen oder 335 Wählen Sie
Liste der Menüeinstellungen 2529-05E Zu allen Einstellungen zur Generierung des Bestätigungstons einer gedrückten Taste, zum Ton, der die Fertigstellung des Druckvorgangs anzeigt und zu anderen Tönen, ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 336) (P. 336) (P. 336) (P. 336) (P. 337) (P.
Liste der Menüeinstellungen Legen Sie fest, ob ein Ton erzeugt werden soll, nachdem das Drucken beendet worden ist. Wählen Sie, ob ein Benachrichtigungston erzeugt werden soll, wenn das Gerät in den Schlafmodus schaltet oder diesen verlässt.
Liste der Menüeinstellungen 2529-05F Element Beschreibung (P. 339) In diesem Abschnitt wird erläutert, wie die Bildqualität für das Drucken justiert werden kann. (P. 353) In diesem Abschnitt wird erläutert, wie Sie die Reinigungsfunktionen benutzen können.
Liste der Menüeinstellungen 2529-05H Zu allen Einstellungen zur Justierung der Bildqualität ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz markiert ( ). (P. 339) (P. 339) (P. 340) (P. 340) (P.
Liste der Menüeinstellungen / Wählen Sie oder Verwenden Sie diese Funktion, wenn das Bild aufgrund einer Farbverschiebung verschwommen ist. Druck-Farbverzerrungen(P.
Liste der Menüeinstellungen -5,0 bis 0,0 bis + 5,0 (mm) Wenn die Ergebnisse beim Drucken auf Spezialpapier nicht zufriedenstellend sind, können Sie mit den folgenden Einstellungen möglicherweise die Gesamtqualität der Ausdrucke verbessern. Beim Bedrucken der Rückseite bedruckten Papiers, von rauem Papier oder von Briefumschlägen können Sie die Ergebnisse möglicherweise mit folgenden Einstellungen verbessern.
Liste der Menüeinstellungen * Touchpanel-Modell für die einzustellende Papierzufuhr Wählen Sie Schwarzweiß LCD-Modell die Papierzufuhr Wählen Sie
Liste der Menüeinstellungen Modus ( Wählen Sie den ) LBP654Cx / LBP653Cdw ● Diese Einstellung ist für normales und dünnes Papier effektiv. ● Die Einstellung eines höheren Verbesserungseffekts kann zu verblassten Druckausgaben und einer langsameren Druckgeschwindigkeit führen.
Liste der Menüeinstellungen / ( ) Die Druckdichte kann ungleich sein, wenn das Gerät in einer Umgebung mit hoher Luftfeuchtigkeit verwendet wird. In diesem Fall kann die Einstellung dieser Option auf das Problem lösen.
Liste der Menüeinstellungen * Wenn die Druckausgabe ein Geisterbild auf der gleichen Seite aufdeckt, kann das Einstellen dieser Option auf das Problem beheben. Offset-Korrektur 1> ( setzen, wird der Toner eventuell nicht ausreichend fixiert und hat blasse Druckausgaben zur Folge.
Liste der Menüeinstellungen regelm. reinigen>/ Wählen Sie die Stufe ( 2-seit. Dr.)>/2-seitiges Drucken)> * Wenn Sie einen doppelseitigen Druck nach dem einseitigen Druck ausführen, können die gedruckten Bilder aufgrund der Kondensation blass sein.
Liste der Menüeinstellungen ● Bei LBP654Cx / LBP653Cdw ist der Verbesserungseffekt stärker mit als mit . ● Wenn Sie eine andere Option als einstellen, kann der Ausdruck verblasst sein oder die Druckgeschwindigkeit kann sich verringern. * Wenn Glanzunregelmäßigkeiten auf der Einzugskante des Papiers auftreten, kann das Einstellen dieser Option auf das Problem beheben.
Liste der Menüeinstellungen Verarbeitung> ( setzen, können die Druckausgaben verblasst sein. / Wenn die Druckdichte so ungleichmäßig ist, dass der Druck wie ein Muster aus Wassertropfen aussieht, kann das Einstellen dieser Option auf das Problem beheben.
Liste der Menüeinstellungen Bild korr.>/ ( setzen, kann die Druckgeschwindigkeit sich verringern. Wenn weiße Bereiche leicht gefärbt sind, kann das Einstellen dieser Option auf das Problem beheben.
Liste der Menüeinstellungen Verarbeitung> * Toner kann sich je nach Papiertyp oder Umgebungsbedingungen von der bedruckten Seite lösen. In diesem Fall kann die Einstellung dieses Elements das Problem beheben. Der Verbesserungseffekt ist mit stärker als mit . Versuchen Sie es zuerst mit .
Liste der Menüeinstellungen * Wenn Sie das Gerät in einer Umgebung mit hoher Feuchtigkeit verwenden, können verblasste oder gewellte Druckausgaben ausgegeben werden. In diesem Fall kann das Ändern der Einstellung dieser Option das Problem lösen. Verarbeitung> ( ) Passt automatisch die Tonerfixierung an.
Liste der Menüeinstellungen Priorisiert die Druckgeschwindigkeit beim Drucken. Senkt den Tonerverbrauch der Tonerpatronen beim Drucken. / Die Druckausgaben können sofort nach dem Austausch der Tonerpatronen verblasst sein. In diesem Fall kann die Einstellung dieser Option auf das Problem lösen. n. Pat.aust. reduz.>/
Liste der Menüeinstellungen 2529-05J Zu den Reinigungsfunktionen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 353) (P. 353) (P. 353) (P. 353) Sterne (*) ● Mit "*" markierte Einstellungen werden je nach dem von Ihnen verwendeten Modell, Optionen oder anderen Einstellungselementen eventuell nicht angezeigt.
Liste der Menüeinstellungen Sie die Meldung ( ) Wählen Sie das Element ( ) Überprüfen ● Während die Kondensatentfernung durchgeführt wird, wird der Druckvorgang möglicherweise nicht korrekt ausgeführt, und es werden leere Seiten ausgegeben. ● Wenn Sie die Einstellung auf setzen, müssen Sie das Gerät eingeschaltet lassen, so dass die Beseitigung des Kondenswassers wirksam bleibt.
Liste der Menüeinstellungen 2529-05K Element Beschreibung (P. 356) In diesem Abschnitt werden die Einstellungen für die jeweilige Funktion beschrieben. (P. 359) In diesem Abschnitt wird das Festlegen der Druckereinstellungen beschrieben. (P. 407) In diesem Abschnitt wird erläutert, wie Sie die Einstellungen zum Empfang von I-Faxnachrichten festlegen. (P.
Liste der Menüeinstellungen 2529-05L Zu allen Optionen bezogen auf die Einstellungen die für die jeweilige Funktion gemeinsam sind, ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (*) ● Mit "*" markierte Einstellungen werden je nach dem von Ihnen verwendeten Modell, Optionen oder anderen Einstellungselementen eventuell nicht angezeigt. Konfigurieren Sie die Einstellungen der Papierzufuhr.
Liste der Menüeinstellungen * *1 Konfigurieren Sie diese Einstellung, wenn Sie Dokumente auf Papier mit Logos drucken möchten (Überdrucken). Im Allgemeinen müssen Sie zum Bedrucken von Papier mit Logos das Papier eventuell anders herum in die Papierquelle einlegen, je nachdem, ob Sie einseitig oder doppelseitig drucken.
Liste der Menüeinstellungen ● Es empfiehlt sich, zu wählen, wenn Sie sich über die zu bedruckende Seite keine Gedanken machen möchten. Wenn Sie eine bestimmte Seite des Papiers bedrucken möchten, brauchen Sie das Papier in der Papierquelle nicht umzudrehen, unabhängig davon, ob ein- oder doppelseitig gedruckt wird.
Liste der Menüeinstellungen 2529-05R Alle auf den Drucker bezogenen Einstellungen sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 359) (P. 405) Sterne (*) ● Mit "*1" markierte Einstellungen werden je nach dem von Ihnen verwendeten Modell, Optionen oder anderen Einstellungselementen eventuell nicht angezeigt. ● Mit "*2" markierte Einstellungen können nicht importiert oder exportiert werden.
Liste der Menüeinstellungen Wählen Sie eine Papierquelle Wählen Sie oder Führt den Druckvorgang fort, auch wenn sich die Papierformateinstellung im Druckertreiber und das Format des eingelegten Papiers wesentlich voneinander unterscheiden.
Liste der Menüeinstellungen Legen Sie das Standard Papierformat und den Papiertyp fest. Der Druckvorgang wird anhand des hier festgelegten Papierformats und Papiertyps durchgeführt, wenn Sie von einem Betriebssystem drucken möchten, das die Druckertreiber nicht unterstützt, oder von einem Mobilgerät oder anderem Gerät, das die Geeignetes Papier(P. 536) Einstellungen für Papierformat und Papiertyp nicht unterstützt.
Liste der Menüeinstellungen /// 17 Stufen
Liste der Menüeinstellungen Wählen Sie oder ● Diese Einstellung steht nur zur Verfügung, wenn auf <600 dpi> gesetzt wurde. Wenn feine Linien oder kleiner Text blass sind, erhöhen Sie die Dichte um einen weniger blassen Ausdruck zu erzeugen.
Liste der Menüeinstellungen Wählen Sie den Modus Druckt einen Umriss von dunklem Text oder einer Figur mit einem glatten Übergang. Das ist der optimale Modus für unterschiedliche Drucktypen. Druckt Umrisse von Figuren und interne Halbtöne mit einem glatten Übergang. Druckt dunklen Text oder Linien in einem Bereich mit farbigem Hintergrund mit einem glatten Übergang.
Liste der Menüeinstellungen Passt die Tonerzufuhrmenge an, so dass eine korrekte Auflösung für Text und Linien sichergestellt wird, und ein korrekter Farbton für andere Druckdatentypen sichergestellt wird. Passt die Tonerzufuhrmenge an, so dass ein korrekter Farbton für alle Druckdatentypen sichergestellt wird. Passt die Tonerzufuhrmenge an, so dass eine korrekte Auflösung für alle Druckdatentypen sichergestellt wird.
Liste der Menüeinstellungen Wählen Sie das Ziel ● Wenn Sie diese Option auf setzen, kann die Druckgeschwindigkeit sich verringern und die Bildqualität beeinträchtigt werden. ● Auch wenn Sie die Einstellung wählen, ist Fettdruck je nach Druckanwendung möglicherweise nicht verfügbar.
Liste der Menüeinstellungen Wählen Sie oder ● Die Einstellungen von und sind nur wirksam, wenn [Erweiterte Glättung] auf [Druckerstandard] im Druckertreiber gesetzt ist.
Liste der Menüeinstellungen Wählen Sie oder ● [Farbabstufung glätten] im Druckertreiber wird nur an Grafikdaten angewendet. Die hier konfigurierte Einstellung wird nur für die Glättungsbearbeitung an Bilddaten angewendet.
Liste der Menüeinstellungen Legen Sie dies fest, um die Bindung über die lange Papierkante vorzunehmen. Legen Sie dies fest, um die Bindung über die kurze Papierkante vorzunehmen. Versetzen Sie die Druckposition zur Einstellung des Binderands an der Bindekante, die über festgelegt wurde. Der Wert "00,0" übt keine Wirkung auf den Binderand aus.
Liste der Menüeinstellungen Einstellwert Lange Kante Kurze Kante Sie können die Druckposition unabhängig von der Papierquelle für alle Druckaufträge in Einheiten von 0,5 mm verschieben.
Liste der Menüeinstellungen / Der Druckvorgang stoppt, wenn bestimmte Fehler während des Vorgangs auftreten. Wenn Sie jedoch diese Option auf setzen, werden bestimmte Fehler übersprungen und der Druckvorgang fortgesetzt. Normalerweise sollte diese Option auf gesetzt werden. überspringen>/
Liste der Menüeinstellungen Wählen Sie oder Legen Sie den Vorgang fest, der ausgeführt werden soll, wenn die Bildqualität sich aufgrund unzureichendem Speicher während des Druckens verschlechtert hat.
Liste der Menüeinstellungen / Wählen Sie oder Bearbeitet die letzte Seite mit einseitigem Druck. Bearbeitet ebenso die letzte Seite mit doppelseitigem Druck.
Liste der Menüeinstellungen Legen Sie fest, ob der Druckvorgang abgebrochen werden soll, wenn das Papierformat des eingelegten Papiers sich von dem im Druckertreiber angegebenen unterscheidet.
Liste der Menüeinstellungen Wählen Sie oder ● Diese Einstellung steht nur zur Verfügung, wenn auf <600 dpi> gesetzt wurde. *1 Wählen Sie eine Methode für die Reproduktion von Halbtönen, wenn auf gesetzt ist. Sie können diese Option für jeden Bildtyp in einem Dokument festlegen.
Liste der Menüeinstellungen Erzeugt einen Druck mit weichen Abstufungen und glatten Kanten. Es eignet sich zum Drucken von Zeichnungen oder Grafiken, die Abstufungen enthalten. Legen Sie die Verarbeitungsmethode zum Korrigieren der Farbe fest.
Liste der Menüeinstellungen II> Wählen Sie den Typ des Bildes oder Legen Sie fest, ob die Ausgabe von leeren Seiten in den Druckdaten deaktiviert werden soll.
Liste der Menüeinstellungen LBP654Cx 0 bis 104 LBP653Cdw / LBP613Cdw 0 bis 54 Wählen Sie die Schriftartennummer ( ) *1 Legen Sie die Schriftgröße in Schritten von 0,25 Punkten fest. Diese Einstellung steht nur zur Verfügung, wenn Sie in eine skalierbare Proportionalschrift wählen.
Liste der Menüeinstellungen Wählen Sie den Zeichencode, der für den Computer, von dem Sie Druckdaten senden, am besten geeignet ist. Die Einstellung wird ignoriert, wenn der Zeichencode durch die in festgelegte Schriftart vorgegeben wird.
Liste der Menüeinstellungen Wählen Sie den Zeichencode Legen Sie fest, ob ein anwenderdefiniertes Papierformat eingestellt wird. Wählen Sie , um die Abmessungen in und einzugeben.
Liste der Menüeinstellungen Ausrichtung> Legen Sie die Abmessungen fest ( Legen Sie fest, ob ein CR-Zeichen (Carriage Return, Wagenrücklauf) angehängt werden soll, wenn das Gerät ein LF-Zeichen (Line Feed, Zeilenvorschub) empfängt. Wenn Sie wählen, wird die Druckposition bei einem LF-Zeichen an den Anfang der nächsten Zeile verschoben.
Liste der Menüeinstellungen Wählen Sie oder ● Diese Einstellung steht nur zur Verfügung, wenn auf <600 dpi> gesetzt wurde. *1 Wählen Sie eine Methode für die Reproduktion von Halbtönen, wenn auf gesetzt ist. Sie können diese Option für jeden Bildtyp in einem Dokument festlegen.
Liste der Menüeinstellungen Erzeugt einen feinen Druck mit klaren Textkanten. Es eignet sich zum Drucken von Zeichen und feinen Linien. Erzeugt einen Druck mit weichen Abstufungen und glatten Kanten. Es eignet sich zum Drucken von Zeichnungen oder Grafiken, die Abstufungen enthalten. Legen Sie die Verarbeitungsmethode zum Korrigieren der Farbe fest.
Liste der Menüeinstellungen Wählen Sie den Typ des Bildes Wählen Sie oder *1 Mit dieser Einstellung können Sie Barcodes drucken, die vom Barcode Printing Kit unterstützt werden. Wenn ausgewählt wird, generiert das Gerät Barcodes, wenn es Barcodebefehle vom Host-Computer empfängt.
Liste der Menüeinstellungen Wählen Sie einen Escape-Code ● Diese Einstellung steht nur zur Verfügung, wenn aktiviert ist. *1 Legen Sie die Einstellungen für den PS-Druck wie das Seitenlayout und die Druckqualität fest. Mit dieser Einstellung können Sie die Dauer bis zur Zeitüberschreitung des Geräts angeben.
Liste der Menüeinstellungen *1 Geben Sie die verwendete Druckmethode an, wenn schwarzer Text einen farbigen Hintergrund oder eine Figur überlappt. Diese Option wird nicht angezeigt, wenn Reinschwarzer Text auf gesetzt wird.
Liste der Menüeinstellungen Setzt die Bildqualität auf den Industriestandard für allgemeine Windows Computermonitore. Wenn der Monitor sRGB unterstützt, können die Daten in den Farbtönen gedruckt werden, die den angezeigten Farben am ehesten gleichen. bis Stellt die Helligkeit des Druckergebnisses ein, um zu verhindern, dass sich die Bildqualität der hellsten und dunkelsten Teile verschlechtert. Je größer der gewählte Gammawert, desto dunkler der gedruckte Text bzw.
Liste der Menüeinstellungen ● Wenn ausgewählt wird, kann die Abstufung der dunklen Farben je nach Daten eventuell ungleichmäßig werden. *2 Legen Sie fest, ob Sie graue Daten in CMYK-Daten mithilfe des Graustufenprofils des Geräts konvertieren möchten.
Liste der Menüeinstellungen Bildtyp Wählen Sie das Objekt, für das die Einstellung geändert werden soll. steht für Buchstaben und Zeichen, steht für Linien und Figuren, und steht für Fotos und Bilder. Einstellwert Druckt die Daten durch Anpassung der Farbtöne, die den am Monitor angezeigten Farben am ehesten entsprechen. Druckt die Daten durch Anpassung an fotoähnliche Farbtöne.
Liste der Menüeinstellungen Sieht Farbtöne vor, die für das Drucken von Fotos oder Bitmap-Bildern geeignet sind. Sieht Farbtöne vor, die für das Drucken von Kunstwerken, Grafiken und andere für Präsentationen verwendete Bilder, geeignet sind. Legen Sie diese Option fest, wenn Sie den RGB-Farbwert im Farbreproduktionsbereich des Geräts so akkurat wie möglich reproduzieren möchten.
Liste der Menüeinstellungen Wählen Sie den Typ des Bildes Wählen Sie oder Bildtyp Wählen Sie das Objekt, für das die Einstellung geändert werden soll. steht für Buchstaben und Zeichen, steht für Linien und Figuren, und steht für Fotos und Bilder. Einstellwert Erzeugt einen feinen Druck mit klaren Textkanten.
Liste der Menüeinstellungen Wählen Sie oder ● Das Überdrucken mit Sonderfarben ist unzulässig. *1 Legen Sie die Methode für das Drucken von Farbdaten in Schwarzweiß fest.
Liste der Menüeinstellungen Einstellungen> oder Druckt Bilder mit feiner Gradation, wie Bilder von Digitalkameras, mit fließenden Übergängen. Druckt Bilder mit kleinem Text oder feinen Linien deutlich. Sie können die Einstellungen für PDF-Dateien ändern.
Liste der Menüeinstellungen Legen Sie fest, ob mehrere Seiten verkleinert und auf einer Seite in einer solchen Anordnung ausgedruckt werden, dass die erste Seite oben links positioniert ist. Wählen Sie beispielsweise <4 auf 1>, um 4 Seiten auf einem einzelnen Blatt auszudrucken.
Liste der Menüeinstellungen überdrucken> oder Skizziert zuerst den schwarzen Text von einem farbigen Hintergrund oder einer Figur, druckt dann den schwarzen Text in dem skizzierten Teil. Die Druckausgaben sind eventuell blasser als oder der Text ist eventuell skizziert.
Liste der Menüeinstellungen Setzt die Bildqualität auf den Industriestandard für allgemeine Windows Computermonitore. Wenn der Monitor sRGB unterstützt, können die Daten in den Farbtönen gedruckt werden, die den angezeigten Farben am ehesten gleichen. bis Stellt die Helligkeit des Druckergebnisses ein, um zu verhindern, dass sich die Bildqualität der hellsten und dunkelsten Teile verschlechtert. Je größer der gewählte Gammawert, desto dunkler der gedruckte Text bzw.
Liste der Menüeinstellungen Wählen Sie oder ● Auch wenn Sie ausgewählt haben, werden die Daten nur mithilfe des Toners K (schwarz) je nach Einstellung von oder gedruckt. *2 Wählen Sie das entsprechende Profil zum Drucken von Daten. Diese Option können Sie für den jeweiligen Bildtyp in einem Dokument festlegen.
Liste der Menüeinstellungen Profil Druckt die Daten durch Anpassung der Farbtöne, die den am Monitor angezeigten Farben am ehesten entsprechen. Druckt die Daten durch Anpassung an fotoähnliche Farbtöne. Druckt die Daten durch Anpassung an Farbtöne, die den am Monitor angezeigten Farben am ehesten entsprechen und reproduziert schwarze und graue Elemente nur mithilfe des Toners K (schwarz).Liste der Menüeinstellungen Sie können das Druckverfahren auswählen, das verwendet wird um Halbtöne (Übergang zwischen den helleren und dunkleren Bereichen eines Bildes) für eine optimale Bildqualität zu reproduzieren. Erzeugt feinere Druckergebnisse als . Diese Option eignet sich zum Drucken von scharfen Konturen des Textes oder feinen Linien.
Liste der Menüeinstellungen Bildtyp Wählen Sie das Objekt, für das die Einstellung geändert werden soll. steht für Buchstaben und Zeichen, steht für Linien und Figuren, und steht für Fotos und Bilder. Einstellwert Erzeugt einen feinen Druck mit klaren Textkanten. Es eignet sich zum Drucken von Zeichen und feinen Linien. Erzeugt einen Druck mit weichen Abstufungen und glatten Kanten.
Liste der Menüeinstellungen Wählen Sie den Typ der Graustufenkonvertierung Druckt in Schwarzweiß mit Betonung der Farbunterschiede, so dass weiche Abstufungen erzielt werden. Druckt in Schwarzweiß, so dass das resultierende Bild so wie ein Schwarzweiß-Fernsehbild (vom NTSC-System) aussieht.
Liste der Menüeinstellungen Minimiert eine Farbabweichung, die auftritt, wenn RGB-Daten in CMYK-Daten konvertiert werden. Führt die Bearbeitung so durch, dass der Farbton gesättigter und leuchtender ist als . Sie können das Druckverfahren auswählen, das verwendet wird um Halbtöne (Übergang zwischen den helleren und dunkleren Bereichen eines Bildes) für eine optimale Bildqualität zu reproduzieren.
Liste der Menüeinstellungen Bildtyp Wählen Sie das Objekt, für das die Einstellung geändert werden soll. steht für Buchstaben und Zeichen, steht für Linien und Figuren, und steht für Fotos und Bilder. Einstellwert Erzeugt einen feinen Druck mit klaren Textkanten. Es eignet sich zum Drucken von Zeichen und feinen Linien. Erzeugt einen Druck mit weichen Abstufungen und glatten Kanten.
Liste der Menüeinstellungen Wählen Sie den Bildtyp Wählen Sie den Typ der Graustufenkonvertierung Bildtyp Wählen Sie das Objekt, für das die Einstellung geändert werden soll. steht für Buchstaben und Zeichen, steht für Linien und Figuren, und steht für Fotos und Bilder.
Liste der Menüeinstellungen sparen> Wählen Sie oder Wählen Sie eine Seitenbeschreibungssprache, damit das Gerät als ein mit dieser Sprache kompatibler Drucker erkannt wird, wenn Sie es über Plug & Play an einen Computer anschließen.
Liste der Menüeinstellungen Das Gerät wird als PS-Drucker erkannt, und eine entsprechende Verbindung wird hergestellt.
Liste der Menüeinstellungen 2529-05S Alle auf das Empfangen von I-Faxen bezogenen Einstellungen sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 407) (P. 407) Sterne (*) ● Mit "*" markierte Einstellungen werden je nach dem von Ihnen verwendeten Modell, Optionen oder anderen Einstellungselementen eventuell nicht angezeigt.
Liste der Menüeinstellungen drucken> Geben Sie das für den Druck zu verwendende Papierformat an.
Liste der Menüeinstellungen 2529-05U Zu allen Einstellungen zum Drucken gespeicherter Dateien ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz markiert ( ). (P. 409) (P. 418) Sterne (*) ● Mit "*" markierte Einstellungen werden je nach dem von Ihnen verwendeten Modell, Optionen oder anderen Einstellungselementen eventuell nicht angezeigt.
Liste der Menüeinstellungen < PDF-Details einstellen> Sieben Stufen <2 auf 1> <4 auf 1> <6 auf 1> <8 auf 1> <9 auf 1> <16 auf 1>
Liste der Menüeinstellungen *
Liste der Menüeinstellungen /// // 17 Stufen Fünf Stufen <1200 dpi> <600 dpi>
Liste der Menüeinstellungen * * Schwarzweiß LCD-Modell 1 bis 999 * *
Liste der Menüeinstellungen
Liste der Menüeinstellungen
* * /// 17 Stufen Liste der Menüeinstellungen * * * *
Liste der Menüeinstellungen Zeigt ein Vorschaubild an. Zeigt Dateinamen und Datumsangaben in Form einer Liste an. Legen Sie fest, ob Dateien auf einem USB-Speichergerät in auf- oder absteigender Reihenfolge nach Dateiname oder Datum sortiert angezeigt werden sollen.
Liste der Menüeinstellungen Bei dem Touchpanel-Modell werden die ersten 40 Zeichen eines Dateinamens angezeigt. Bei dem Schwarzweiß LCD-Modell werden die ersten 20 Zeichen eines Dateinamens angezeigt. ● Bei der oben genannten Anzahl an Zeichen sind die Zeichen für die Dateierweiterung wie ".jpg" nicht inbegriffen. Legen Sie fest, ob die Funktionen eines USB-Speichergeräts aktiviert oder deaktiviert werden sollen.
Liste der Menüeinstellungen 2529-05W Legen Sie fest, ob Geschützter Druck aktiviert oder deaktiviert werden soll ( Drucken mit der Funktion für geschützten Druck(P. 177) ). Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. 10 bis 30 bis 240 (Min.
Liste der Menüeinstellungen 2529-05X Element Beschreibung (P. 421) Sie können die Einstellungen für das Verwalten der Benutzer des Geräts konfigurieren. (P. 422) Sie können Informationen über die Hardware und Vorgänge verwalten sowie die unterschiedlichen Daten, die für die Verwendung der Gerätefunktionen erforderlich sind. /(P. 425) (P.
Liste der Menüeinstellungen 2529-05Y Zu allen Einstellungen zur Benutzerverwaltung des Geräts ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 421) (P. 421) Legen Sie die ID oder PIN fest, die ausschließlich für Administratoren mit Zugriff auf und gilt.
Liste der Menüeinstellungen 2529-060 Zu allen Einstellungen zur Verwaltung der Informationen für die Hardware und Funktionen, sowie zur Verwaltung von Daten, die für die Gerätefunktionen erforderlich sind, ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 422) (P. 422) (P. 423) (P.
Liste der Menüeinstellungen Wählen Sie ein Land oder eine Region Legen Sie fest, ob Druckprotokolle im Display des Geräts angezeigt werden sollen.
Liste der Menüeinstellungen Verbrauchsmaterial anzeigen (RUI/Toner Status)> / Wählen Sie , um zu verhindern, dass eine Schaltfläche, die auf Websites zum Erwerb von Tonerpatronen zugreift, in der Remote UI angezeigt wird.
Liste der Menüeinstellungen / 2529-061 Zu allen Einstellungen zur Software und der für das Gerät verfügbaren Systemoptionen, sowie zur Registrierung der Lizenz, ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 425) (P. 425) (P. 426) Sterne (*) ● Mit "*1" markierte Einstellungen können nicht importiert oder exportiert werden.
Liste der Menüeinstellungen Touchpanel-Modell Wählen Sie unter Wählen Sie oder unter Starten Sie das Gerät neu Schwarzweiß LCD-Modell
Liste der Menüeinstellungen 2529-062 Zu allen Einstellungen zur Nutzung der Geräteeinstellungen und zur Initialisierung der Daten ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 427) /(P. 427) (P. 428) (P.
Liste der Menüeinstellungen / Wählen Sie oder Starten Sie das Gerät neu * Wählen Sie diese Funktion, wenn [Einstellungen Schlüssel und Zertifikat] und [Einstellungen CA-Zertifikat] auf die werkseitigen Standardwerte zurückgesetzt werden sollen. Schlüssel und Zertifikat initialisieren(P.
Liste der Menüeinstellungen 2529-063 Alle auf Authentifizierungsfunktion und Verschlüsselung bezogenen Einstellungen sind mit Erläuterungen versehen. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. (P. 429) (P. 429) Sie können die Sicherheit der Authentisierungsfunktion verstärken.
Liste der Menüeinstellungen Touchpanel-Modell Wählen Sie unter Wählen Sie oder unter Starten Sie das Gerät neu Schwarzweiß LCD-Modell
Wartung Wartung Wartung .............................................................................................................................................................. 432 Regelmäßige Reinigung .................................................................................................................................... 434 Reinigen des Gehäuses ................................................................................................................................
Wartung Wartung 2529-064 In diesem Kapitel werden Wartung und Reinigung des Geräts sowie das Einstellen der Bildqualität erläutert. ◼ Grundlegende Reinigungsaufgaben Regelmäßige Reinigung(P. 434) ◼ Austausch von Verbrauchsmaterial Austausch der Tonerpatrone(P. 440) Überprüfen der verbliebenen Menge an Verbrauchsmaterial(P. 445) Verbrauchsmaterial(P.
Wartung Transport des Geräts(P. 446) Anpassen der Bildqualität(P. 448) Anzeigen des Zählerwerts(P. 453) Drucken von Berichten und Listen(P.
Wartung Regelmäßige Reinigung 2529-065 Reinigen Sie das Gerät regelmäßig, damit sich die Druckqualität nicht verschlechtert und damit Sie es sicher und problemlos verwenden können. Zu reinigende Teile Gehäuse und Lüftungsschlitze Reinigen des Gehäuses(P. 435) Interne Fixierbaugruppe und Transferband Reinigen des Fixierbauteils(P. 436) Reinigen des Übertragungsriemens (ITB)(P.
Wartung Reinigen des Gehäuses 2529-066 Wischen Sie das Gehäuse des Geräts und insbesondere den Bereich um die Lüftungsschlitze regelmäßig ab, damit das Gerät in einwandfreiem Zustand bleibt. 1 Schalten Sie das Gerät AUS, und trennen Sie das Netzkabel von der Netzsteckdose. ● Wenn Sie das Gerät ausschalten, werden Daten in der Druckwarteschlange gelöscht. 2 Reinigen Sie das Gehäuse des Geräts und die Lüftungsschlitze.
Wartung Reinigen des Fixierbauteils 2529-067 Wenn die Fixierbaugruppe schmutzig ist, kann die Druckausgabe verschmieren. Reinigen Sie die Fixierbaugruppe wie im Folgenden beschrieben. Beachten Sie, dass die Fixierbaugruppe nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. Zum Reinigen der Fixierbaugruppe benötigen Sie Normalpapier im Format A4 oder Letter. Legen Sie das Papier in die Papierkassette oder das Mehrzweckfach ein, bevor Sie die folgenden Schritte ausführen.
Wartung ● Wenn abgeschlossen ist, wird ein leeres Blatt Papier ausgegeben. Wenn das Symptom sich nicht verbessert, dann führen Sie ebenfalls durch. ◼ Fixierbauteil reinigen 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie 3 Wählen Sie . 4 Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in 5 Wählen Sie .
Wartung ● Wenn der Vorgang abgeschlossen ist, wird ein Blatt Papier mit einem gedruckten Muster ausgegeben.
Wartung Reinigen des Übertragungsriemens (ITB) 2529-068 Schmutz kann am Transferriemen im Gerät haften und eine Verschlechterung der Druckqualität verursachen. Reinigen Sie den Transferriemen wie im Folgenden beschrieben. Beachten Sie, dass der Transferriemen nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. 1 Wählen Sie auf dem Bildschirm Startseite. 2 Wählen Sie 3 Wählen Sie . 4 Wählen Sie . Bildschirm Startseite(P.
Wartung Austausch der Tonerpatrone 2529-069 Am Gerät wird eine Meldung angezeigt, wenn der in der Tonerpatrone verbliebene Toner zur Neige geht. Beachten Sie, dass möglicherweise die Druckqualität leidet, wenn Sie den Druck fortsetzen, ohne dieses Problem zu beheben. Sie können die in den Tonerpatronen verbliebene Tonermenge auf dem Display überprüfen. ( Überprüfen der verbliebenen Menge an Verbrauchsmaterial(P. 445) ). Wenn eine Meldung angezeigt wird(P.
Wartung Diese Meldung, die zusammen mit der jeweiligen Farbe der Tonerpatrone erscheint, weist Sie darauf hin, dass eine Tonerpatrone das Ende der Lebensdauer erreicht hat. Es empfiehlt sich, die Patrone durch eine neue zu ersetzen. Sie können weiterhin drucken, aber die Druckqualität ist möglicherweise nicht zufriedenstellend. / Zeigt die Schritte zum Austauschen einer Tonerpatrone an.
Wartung LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn 2 Ziehen Sie das Patronenfach heraus. 3 Ziehen Sie die Ziel-Tonerpatrone gerade nach oben aus dem Gerät. 4 Nehmen Sie die Ersatzpatrone aus der Verpackung. 1 Ziehen Sie die Lasche des Verpackungsmaterials auf eine ebene Stelle. 2 Ziehen Sie die Tonerpatrone heraus.
Wartung 5 Schütteln Sie die Tonerpatrone wie unten gezeigt 5- oder 6-mal, um den Toner gleichmäßig in der Patrone zu verteilen. ● Berühren Sie nicht die Fläche der Trommel an der Unterseite der Tonerpatrone. 6 Setzen Sie die Tonerpatrone ein. ● Für jede Farbe gibt es im Tonerpatronenfach eine eigene Vertiefung, die mit einem Aufkleber in der Farbe der Tonerpatrone gekennzeichnet ist ( ). Setzen Sie die Tonerpatrone in die richtige Vertiefung für die jeweilige Farbe ein.
Wartung 7 Schieben Sie das Patronenfach wieder hinein, und schließen Sie die vordere Abdeckung. ● Sofort nachdem Sie die vordere Abdeckung geschlossen haben, beginnt die schnelle Justage ( justieren(P. 449) ). LINKS Verbrauchsmaterial(P.
Wartung Überprüfen der verbliebenen Menge an Verbrauchsmaterial 2529-06A Gehen Sie folgendermaßen vor, um die in den Tonerpatronen verbliebene Tonermenge zu überprüfen. Bevor Sie einen umfangreichen Druckauftrag starten, ist es besonders wichtig, zu überprüfen, ob Sie eine neue Tonerpatrone bereit halten müssen.
Wartung Transport des Geräts 2529-06C Das Gerät ist schwer. Befolgen Sie unbedingt die folgenden Schritte, um beim Transport des Geräts Verletzungen zu vermeiden, und lesen Sie vorher unbedingt die Sicherheitshinweise. Wichtige Sicherheitsvorschriften(P. 2) 1 Schalten Sie das Gerät und den Computer AUS. ● Wenn Sie das Gerät ausschalten, werden Daten in der Druckwarteschlange gelöscht. 2 Trennen Sie die Kabel in der numerischen Reihenfolge vom Gerät, wie in der Abbildung unten dargestellt.
Wartung ● Das Gerät ist schwer ( Haupteinheit(P. 533) ). Wenn Sie LBP654Cx / LBP653Cdw verwenden, stellen Sie sicher, dass das Gerät von mindestens zwei Personen getragen wird. ● Fassen Sie in die Griffmulden, und heben Sie das Gerät an. Wenn beim Kassetteneinheit die optionale Papierkassette am Gerät installiert ist, lassen Sie die optionale Papierkassette stehen, und transportieren Sie sie nach dem Umstellen des Geräts.
Wartung Anpassen der Bildqualität 2529-06E Wenn die Druckergebnisse nicht zufriedenstellend sind und zum Beispiel die Bildqualität schlecht ist, eine schlechte Reproduzierbarkeit vorliegt oder die Farben nicht übereinstimmen, führen Sie zum Test die unten aufgeführten Anpassungen durch. ◼ Gradation automatisch justieren Wenn die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie aus, um die Farbreproduktion zu verbessern.
Wartung Anpassen der Gradation 2529-06F Als Gradation bezeichnet man die Abstufungen zwischen dunklen und hellen Tönen einer Farbe. Je mehr Farbabstufungen gedruckt werden, desto natürlicher erscheinen die Ausdrucke. Wenn die Farbreproduktion unzureichend ist und die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie die geeignete Funktion zur automatischen Justage aus.
Wartung Korrektur von Druck-Farbverzerrungen 2529-06H Druck-Farbverzerrungen treten auf, wenn beim Drucken eines Bilds mit mehreren Tonerpatronen die Positionen der Farben nicht präzise aufeinander abgestimmt sind. In diesem Fall erscheinen die Ausdrucke verschwommen. Führen Sie die folgenden Schritte aus, wenn es zu Druck-Farbverzerrungen kommt. Diese Justagefunktion wird in bestimmten Fällen automatisch durchgeführt, unter anderem nach dem Austauschen von Tonerpatronen.
Wartung Druckposition anpassen 2529-06J Wenn ein Dokument nicht in der Mitte oder außerhalb des bedruckbaren Bereichs gedruckt wird, passen Sie die Druckposition an. Sie können die Druckposition für jede Papierzufuhr anpassen. Sie können die Druckposition im Bereich von -5,0 bis +5,0 mm in Schritten von 0,1 mm anpassen. Überprüfen der Richtung und des Abstands zum Anpassen Wenn Sie die Druckposition anpassen, legen Sie die Richtung mit "+" bzw. "-" und den Abstand mit "mm" fest.
Wartung 6 Geben Sie einen Einstellwert ein. 7 Drücken Sie ( ). Anpassen der Druckposition für alle Druckaufträge ● Sie können im Einstellungsmenü des Bedienfelds verwenden, um die Druckposition für alle Druckaufträge unabhängig von der Papierzufuhr anzupassen. Sie können die Druckposition im Bereich von 0,5 mm in Schritten von -50,0 mm und +50,0 mm anpassen. (P.
Wartung Anzeigen des Zählerwerts 2529-06K Sie können die Gesamtzahl der für Farb- bzw. Schwarzweißausdrucke verwendeten Seiten separat prüfen. Die Anzahl der Ausdrucke umfasst Ausdrucke von Speichermedium Druck und der Liste sowie Ausdrucke der Daten von einem Computer. Touchpanel-Modell Überprüfen Sie die Anzahl der gedruckten Seiten <113: Gesamt (Schwarzweiß/Klein)> Zeigt die Gesamtzahl der in Schwarzweiß gedruckten Seiten an.
Wartung Drucken von Berichten und Listen 2529-06L Sie können Berichte und Listen ausdrucken, um Informationen, wie beispielsweise die gesamte Anzahl an Drucken für die jeweilige und die Geräteeinstellungen zu überprüfen. Drucken eines Berichts über die Gesamtanzahl von Drucken pro Abteilungs-ID(P. 454) Drucken der Liste mit den Einstellungen(P. 454) Drucken von Berichten und Listen zum Nutzungsstatus des Geräts(P.
Wartung Wählen Sie oder Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt ist, und wählen Sie Schwarzweiß LCD-Modell Wählen Sie oder Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt ist ● Die Anwenderdatenliste
Wartung Touchpanel-Modell <Öko-Bericht> Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt ist, und wählen Sie Schwarzweiß LCD-Modell <Öko-Bericht> Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt ist Statusbericht Verbrauchsmaterial Sie können den Status des im Gerät installierten Verbrauchsmaterials ü
Wartung Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt ist PS-Schriftliste Sie können die im PS-Modus verfügbaren Schriftarten überprüfen, indem Sie einen Bericht ausdrucken.
Wartung Verbrauchsmaterial 2529-06R Im Folgenden finden Sie eine Richtschnur für die geschätzte Zeit, nach der das in diesem Gerät verwendete Verbrauchsmaterial ausgetauscht werden sollte. Kaufen Sie das Verbrauchsmaterial bei Ihrem autorisierten Canon Händler vor Ort. Beachten Sie bei der Lagerung von und im Umgang mit Verbrauchsmaterial die Sicherheits- und Gesundheitshinweise.
Wartung Canon Original-Tonerpatrone Durchschnittliche Kapazität der Tonerpatrone* Canon Cartridge 046 Black (Schwarz) 2.200 Blatt Canon Cartridge 046 Yellow (Gelb) Canon Cartridge 046 Magenta (Magenta) Canon Cartridge 046 Cyan (Cyan) 2.300 Blatt Canon Cartridge 046 H Black (Schwarz) 6.300 Blatt Canon Cartridge 046 H Yellow (Gelb) Canon Cartridge 046 H Magenta (Magenta) 5.
Fehlerbehebung Fehlerbehebung Fehlerbehebung ............................................................................................................................................. 461 Häufige Probleme .............................................................................................................................................. 463 Installations-/Einstellungsprobleme .............................................................................................................
Fehlerbehebung Fehlerbehebung 2529-06S Schlagen Sie in diesem Kapitel nach, wenn ein Problem auftritt, um möglicherweise eine Lösung zu finden, bevor Sie sich mit Canon in Kontakt setzen. ◼ Häufige Probleme In diesem Abschnitt werden die zu ergreifenden Maßnahmen erläutert, wenn Sie vermuten, dass das Gerät nicht ordnungsgemäß funktioniert. Häufige Probleme(P.
Fehlerbehebung ◼ Wenn sich ein Problem nicht beheben lässt Wenn ein Problem bestehen bleibt, finden Sie unter Kontaktinformationen. Wenn sich ein Problem nicht beheben lässt(P.
Fehlerbehebung Häufige Probleme 2529-06U Wenn beim Betrieb des Geräts Probleme auftreten, prüfen Sie die Punkte in diesem Abschnitt, bevor Sie uns kontaktieren. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support.
Fehlerbehebung Installations-/Einstellungsprobleme 2529-06W Siehe auch Häufige Probleme(P. 463) . Probleme mit der Wireless/Wired LAN-Verbindung(P. 464) Problem mit der USB-Verbindung(P. 467) Problem mit dem Druckserver(P. 467) Probleme mit der Wireless/Wired LAN-Verbindung Die Verbindung über Wireless LAN und Wired LAN kann nicht gleichzeitig hergestellt werden. ● Die Verbindung über Wireless LAN und Wired LAN kann nicht gleichzeitig hergestellt werden.
Fehlerbehebung ● Wenn Sie das Gerät über ein Wireless LAN mit einem Computer verbinden, überprüfen Sie, ob das Gerät ordnungsgemäß installiert wurde und für die Verbindung mit dem Netzwerk bereit ist. Wenn das Gerät keine Verbindung zum Wireless LAN herstellen kann(P. 465) Sie sind sich hinsichtlich der eingestellten IP-Adresse nicht sicher. Anzeigen von Netzwerkeinstellungen(P. 47) Sie können nicht zwischen einem Wired LAN und einem Wireless LAN als Verbindungsmethode wechseln.
Fehlerbehebung Wenn das Problem auch nach der Überprüfung der oben genannten Punkte weiter besteht: ● Schalten Sie die Geräte aus und schalten Sie sie dann wieder ein. ● Warten Sie einen Augenblick und versuchen Sie dann erneut, eine Verbindung zum Netzwerk herzustellen. Überprüfen Sie, ob das Gerät eingeschaltet ist. ● Wenn das Gerät eingeschaltet ist, schalten Sie es aus und dann wieder ein. Überprüfen Sie den Aufstellungsort des Geräts und des Wireless LAN-Routers.
Fehlerbehebung Wenn Sie die Einstellungen des Wireless LAN-Routers ändern müssen Wenn der Wireless LAN-Router wie unten beschreiben eingerichtet ist, ändern Sie die Einstellungen des Routers. ● Die MAC-Adresspaketfilterung ist eingerichtet. ● Wenn nur IEEE 802.11n für die Drahtloskommunikation verwendet wird, ist WEP ausgewählt oder das WPA/ WPA2-Verschlüsselungsverfahren ist auf TKIP gesetzt. Problem mit der USB-Verbindung Kommunikation nicht möglich. ● Wechseln Sie das USB-Kabel aus.
Fehlerbehebung Druckprobleme 2529-06X Siehe auch Häufige Probleme(P. 463) . Die Druckergebnisse sind nicht zufriedenstellend. Das Papier wellt sich oder weist Falten auf. Wenn Sie nicht ordnungsgemäß drucken können(P. 471) Sie können nicht drucken. ● Können Sie eine Windows-Testseite ausdrucken? Wenn Sie eine Windows-Testseite ausdrucken können, liegt kein Problem im Gerät oder Druckertreiber vor. Überprüfen Sie die Druckeinstellungen in Ihrer Anwendung. Drucken einer Testseite in Windows(P.
Fehlerbehebung Installieren der Treiber(P. 81) ● Können Sie von anderen Computern im Netzwerk drucken? Wenn Sie auch von anderen Computern aus nicht drucken können, wenden sich an Ihren autorisierten Canon-Händler vor Ort oder die Canon-Hotline. Wired LAN-Verbindung ● Haben Sie den korrekten Port ausgewählt? Wenn kein verwendbarer Port vorhanden ist, erstellen Sie einen Port. Überprüfen des Druckeranschlusses(P. 562) Konfigurieren von Druckerports(P.
Fehlerbehebung ● Ist ein Fehler aufgetreten? Prüfen Sie das Auftragslog. Anzeigen des Druckstatus und des Logs(P. 173) Das Drucken scheint lange zu dauern. * ● Es empfiehlt sich, den geschützten Druck zu deaktivieren, wenn die Funktion nicht verwendet wird. Ändern der gültigen Speicherdauer für geschützte Dokumente(P. 178) * Wenn im Speicher nur noch wenig Platz frei ist, verlangsamt sich die Verarbeitungsgeschwindigkeit des Geräts genau wie bei einem Computer.
Fehlerbehebung Wenn Sie nicht ordnungsgemäß drucken können 2529-06Y Wenn die Druckergebnisse nicht zufriedenstellend sind oder sich das Papier wellt oder Falten aufweist, probieren Sie die folgenden Abhilfemaßnahmen aus. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support. ◼ Probleme mit der zufriedenstellend(P. 473) Am unteren Rand von Ausdrucken erscheinen Flecken(P. 473) Tonerflecken und -spritzer erscheinen(P.
Fehlerbehebung Punkte erscheinen(P. 483) Die Rückseite des Papiers ist beschmutzt(P. 483) ◼ Probleme mit dem Papier für den Ausdruck Das Papier weist Falten auf oder wellt sich(P. 485) Papier weist Falten auf(P. 485) Das Papier wellt sich(P. 486) ◼ Probleme mit der Papierzufuhr Ausdrucke sind schräg(P. 488) Papier wird nicht korrekt zugeführt(P. 488) Papier wird nicht eingezogen/Zwei oder mehr Blätter werden auf einmal eingezogen(P.
Fehlerbehebung Die Druckergebnisse sind nicht zufriedenstellend 2529-070 Verschmutzungen im Gerät können die Druckergebnisse beeinträchtigen. Pflegen und reinigen Sie zunächst das Gerät. Regelmäßige Reinigung(P. 434) Am unteren Rand von Ausdrucken erscheinen Flecken Verwenden Sie geeignetes Papier? ● Prüfen Sie, welche Papiertypen unterstützt werden, und tauschen Sie das Papier gegen einen geeigneten Typ aus. Legen Sie außerdem die Einstellungen für Papierformat und Papiertyp ordnungsgemäß fest.
Fehlerbehebung ● Dieser Vorgang ist effektiver, wenn Sie ihn etwa eine Stunde nach Beendigung der vorherigen Drucksitzung durchführen. Schlieren erscheinen auf den Ausdrucken Verwenden Sie geeignetes Papier? ● Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Geeignetes Papier(P. 536) Einlegen von Papier(P.
Fehlerbehebung Nachbilder erscheinen in leeren Bereichen Verwenden Sie geeignetes Papier? ● Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Geeignetes Papier(P. 536) Einlegen von Papier(P. 124) Ist es Zeit, die Tonerkartusche auszutauschen? ● Substanzen in der Tonerpatrone haben sich möglicherweise verschlechtert. Ersetzen Sie die Tonerpatrone. Austausch der Tonerpatrone(P.
Fehlerbehebung Tonerflecken und -spritzer erscheinen Verwenden Sie geeignetes Papier? ● Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Geeignetes Papier(P. 536) Einlegen von Papier(P. 124) Sind die Tonerpatronen verbraucht? ● Prüfen Sie, wie viel Toner in den Tonerpatronen verblieben ist, und tauschen Sie die Tonerpatronen gegebenenfalls aus. Austausch der Tonerpatrone(P.
Fehlerbehebung Verwenden Sie Papier, das viel Papierstaub enthält? (LBP654Cx / LBP653Cdw) ● Das Verwenden von Papier mit einem hohen Papierstaubanteil, kann zu verblassten oder schlierigen Druckausgaben führen. In diesem Fall kann die Einstellung auf das Problem lösen. /(P. 348) ● Wenn Sie diese Option auf setzen, kann die Druckgeschwindigkeit sich verringern.
Fehlerbehebung auf setzen, wird die Kondensation im Gerät entfernt. Kondensatentfernung kann aufgrund der Temperaturänderung automatisch durchgeführt werden. (P. 353) Die ● Während die Kondensatentfernung durchgeführt wird, wird der Druckvorgang möglicherweise nicht korrekt ausgeführt, und es werden leere Seiten ausgegeben.
Fehlerbehebung ● Wenn Sie die Einstellung auf setzen, müssen Sie das Gerät eingeschaltet lassen, so dass die Beseitigung des Kondenswassers wirksam bleibt. ● Die Einstellung für ist nicht verfügbar, wenn auf gesetzt ist. Streifen erscheinen/Druckbild ist ungleichmäßig Verwenden Sie geeignetes Papier? ● Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Geeignetes Papier(P.
Fehlerbehebung Verwenden Sie das Gerät in einer Umgebung mit hoher Feuchtigkeit? ● Ändern Sie die Einstellung für . Die Einstellung dieser Option auf löst möglicherweise das Problem. (P. 344) ● Wenn Sie diese Option auf setzen und das Gerät in einer Umgebung mit geringer Luftfeuchtigkeit verwenden, können gedruckte Bilder und Text verschwommen sein.
Fehlerbehebung Sind die Tonerpatronen verbraucht? ● Prüfen Sie, wie viel Toner in den Tonerpatronen verblieben ist, und tauschen Sie die Tonerpatronen gegebenenfalls aus. Austausch der Tonerpatrone(P. 440) Sind die weißen Bereiche leicht farbig? ● Ändern Sie die Einstellung für . Die Einstellung dieser Option auf löst möglicherweise das Problem. (P. 349) ● Wenn Sie diese Option auf setzen, kann die Druckdichte heller sein.
Fehlerbehebung Wenn Sie doppelseitig drucken, erscheinen Lücken auf der Einzugskante des Papiers? (LBP654Cx / LBP653Cdw) ● Wenn Sie doppelseitigen Druck auf dünnem Papier ausführen, können Lücken auf der Rückseite des Papiers auf der Einzugskante entstehen. In diesem Fall kann die Einstellung der Option auf das Problem lösen. /(P.
Fehlerbehebung Punkte erscheinen Haben Sie die Fixiereinheit gereinigt? ● Reinigen Sie die Fixiereinheit. Reinigen des Fixierbauteils(P. 436) ● Wenn das Reinigen des Fixierbauteils das Problem nicht behebt, kann die Einstellung der Option auf das Problem lösen. /(P. 350) ● Wenn Sie diese Option auf setzen, kann die Druckgeschwindigkeit sich verringern.
Fehlerbehebung * Halbtöne für Tabellenzellen, Grafiken, Präsentationen, Hintergründe, Fotos usw. ● Wenn Sie einen höheren Wert festlegen, wird die Druckgeschwindigkeit langsamer. ● Wenn sich das Symptom nach dem Ändern der Einstellung von nicht verbessert, führen Sie durch. Reinigen des Fixierbauteils(P.
Fehlerbehebung Das Papier weist Falten auf oder wellt sich 2529-071 Papier weist Falten auf Ist das Papier richtig eingelegt? ● Wenn das eingelegte Papier über die Füllhöhenmarkierung hinausragt oder schräg eingelegt ist, können sich Falten bilden. Einlegen von Papier(P. 124) Verwenden Sie feuchtes Papier? ● Tauschen Sie das Papier gegen geeignetes Papier aus. Einlegen von Papier(P.
Fehlerbehebung ● Wenn Sie oder festlegen, können die gedruckten Bilder verschwommen sein. Das Papier wellt sich Verwenden Sie geeignetes Papier? ● Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Stellen Sie außerdem Papierformat und -typ ordnungsgemäß ein. Geeignetes Papier(P. 536) Einlegen von Papier(P. 124) Angeben von Papierformat und -typ(P. 145) ● Ändern Sie die Einstellung für .
Fehlerbehebung Verwenden Sie das Gerät in einer Umgebung mit hoher Feuchtigkeit? (LBP654Cx / LBP653Cdw) ● Die Einstellung der Option auf kann das Problem eventuell lösen. (P. 351) ● Wenn Sie diese Option auf setzen, können die Druckausgaben verblasst sein.
Fehlerbehebung Papier wird nicht korrekt zugeführt 2529-072 Ausdrucke sind schräg Sind die Papierführungen an den Papierkanten ausgerichtet? ● Wenn die Papierführungen zu lose oder zu eng eingestellt sind, kommt es zu schrägen Ausdrucken. Einlegen von Papier(P. 124) Papier wird nicht eingezogen/Zwei oder mehr Blätter werden auf einmal eingezogen Ist das Papier richtig eingelegt? ● Fächern Sie den Papierstapel gut auf, sodass das Papier nicht zusammenklebt.
Fehlerbehebung Eine Meldung oder eine Nummer beginnend mit "#" (ein Fehlercode) erscheint 2529-073 Wenn eine Meldung auf dem Display des Geräts oder eine Nummer (Fehlercode) mit dem vorangestellten "#" erscheint, sehen Sie in den folgenden Abschnitten nach, um die Lösung zu überprüfen. Gegenmaßnahmen für die jeweilige Meldung(P. 490) Gegenmaßnahmen für den jeweiligen Fehlercode(P.
Fehlerbehebung Gegenmaßnahmen für die jeweilige Meldung 2529-074 Wenn ein Vorgang wegen eines Fehlers während des Druckens oder der Speicherkapazität unmöglich wird, erscheint eine Meldung im Display. Weitere Informationen zu Meldungen finden Sie in der folgenden Liste. Möglicherweise wird eine gefälschte beziehungsweise nicht von Canon stammende Patrone verwendet. Der Füllstand der Patrone kann nicht richtig angezeigt werden. Die verwendete Tonerpatrone ist möglicherweise kein Canon-Originalprodukt.
Fehlerbehebung ● Stellen Sie die Verbindung wieder her und beachten Sie das Zeitlimit. Konfiguration der Verbindung mit der WPS Tastendrückmethode(P. 29) Konfiguration der Verbindung im Modus "WPS PIN-Code"(P. 31) Eine SSID oder ein Netzwerkschlüssel eines Wireless LAN-Routers wurde manuell eingegeben, aber die Eingabe war falsch. ● Überprüfen Sie die SSID und den Netzwerkschlüssel, und geben Sie sie richtig ein. Überprüfen von SSID und Netzwerkschlüssel(P.
Fehlerbehebung ● Legen Sie ein neues Passwort fest. Authentisierungseinstellungen prüfen. Die im Gerät festgelegte Authentisierungsmethode stimmt nicht mit der auf dem RADIUS-Server festgelegten Authentisierungsmethode überein. ● Überprüfen Sie, ob auf diesem Gerät und dem RADIUS-Server dieselbe Authentisierungsmethode festgelegt wurde, und legen Sie die korrekte Authentisierungsmethode fest. Konfigurieren der IEEE 802.1X-Authentisierungseinstellungen(P. 267) Farbdrucken ist beschränkt.
Fehlerbehebung Verbindung nicht möglich. Die maximale Anzahl an Geräten, die eine Verbindung zu dem Zugriffspunkt herstellen können, wurde erreicht./Verb. n. m. Höchst- zahl. d. Ger., die m. Zugr.p. verb. werd. kann überschr. Das Gerät versuchte, eine Verbindung zu einem Wireless LAN-Router herzustellen, welcher bereits mit der maximalen Anzahl an verbundenen Geräten ausgelastet ist. ● Verringern Sie die Anzahl der Geräte (Clients), die mit dem Wireless LAN-Router verbunden sind.
Fehlerbehebung Reinigung konnte nicht durchgeführt werden. Während der Reinigung hat sich Papier gestaut. ● Entfernen Sie das gestaute Papier, legen Sie das Papier korrekt ein, und führen Sie die Reinigung erneut aus. Beheben von Papierstaus(P. 511) Reinigen des Fixierbauteils(P. 436) Die in den Tonerpatronen verbliebene Tonermenge ist für das Reinigen der Fixiereinheit nicht ausreichend. ● Für die Reinigung ist ausreichend Toner in den Tonerpatronen erforderlich.
Fehlerbehebung Authentisierung von gemeinsamem Schlüssel konnte nicht ausgeführt werden. WEP-Einstellungen prüfen./Authent. v. gemeins. Schlüssel nicht möglich. WEP-Einst. prüfen. Der Netzwerkschlüssel (WEP-Schlüssel) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert. ● Prüfen Sie den Netzwerkschlüssel (WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät. Überprüfen von SSID und Netzwerkschlüssel(P.
Fehlerbehebung ● Wenn Sie / wählen, können Sie mit dem Drucken fortfahren, aber es kann am Gerät zu Fehlfunktionen kommen. Authentisierungs-Fehler Google Cloud Print Cloud Print konnte die Serverauthentisierung nicht durchführen oder konnte keine Informationen für die Registrierung abrufen. ● Prüfen Sie, ob die Datums- und Uhrzeiteinstellungen korrekt sind. (P.
Fehlerbehebung Die Anz. d. eingeg. Zeichen ist falsch oder ungültige Zeichen eingegeben. Der Netzwerkschlüssel (WPA-/WPA2-PSK- oder WEP-Schlüssel) eines Wireless LAN-Routers wurde nicht richtig eingegeben. ● Prüfen Sie den Netzwerkschlüssel (WPA-/WPA2-PSK- oder WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät. Weitere Informationen zum Prüfen des Netzwerkschlüssels finden Sie in den Anleitungen zu den verwendeten Netzwerkgeräten, oder wenden Sie sich an die Hersteller.
Fehlerbehebung Speicher voll. Fehler üb. Taste Statmon. prf Der Speicher ist voll mit Druckdaten, die aufgrund von Fehlern nicht ausgedruckt werden konnten. ● Brechen Sie das Drucken der Dokumente mit Fehlern ab, oder drucken Sie die Dokumente durch Auswahl von auf dem Bildschirm Druckstatusüberprüfung. Abbrechen des Druckens(P. 170) Speicher voll. Gesch. Druckauftr. ausführen. Der Speicher ist voll mit geschützten Dokumenten, die nicht ausgedruckt wurden.
Fehlerbehebung Kein Papier Es ist kein Papier in die Papierkassette oder das Mehrzweckfach eingelegt. ● Legen Sie Papier ein. Einlegen von Papier(P. 124) Es ist kein Papier für das Ausdrucken von Berichten oder Listen eingelegt. ● Legen Sie geeignetes Papier für das Drucken von Berichten oder Listen ein, und nehmen Sie die Einstellungen für das Papierformat und den Papiertyp vor. Einlegen von Papier(P. 124) Angeben von Papierformat und -typ(P. 145) Geeignetes Papier(P.
Fehlerbehebung Nicht übereinst. Papierform. u. Einst. Das über das Bedienfeld eingestellte Papierformat entspricht dem Format des eingelegten Papiers nicht. ● Achten Sie darauf, dass das in eingestellte Papierformat dem Format des tatsächlich eingelegten Papiers entspricht. So verwenden Sie das eingelegte Papier Ändern Sie die Einstellung in so, dass sie dem Format des eingelegten Papiers entspricht. Angeben von Papierformat und -typ(P.
Fehlerbehebung Tonerpatrone (Cyan) vorbereiten. Die Tonerpatrone muss bald ausgetauscht werden. ● Achten Sie darauf, die Ersatztonerpatrone bereit zu halten. Ersetzen Sie die Tonerpatrone, wenn Sie diese Meldung sehen, bevor Sie einen großen Druckauftrag beginnen. Verbrauchsmaterial(P. 458) Tonerpatrone (Magenta) vorbereiten. Die Tonerpatrone muss bald ausgetauscht werden. ● Achten Sie darauf, die Ersatztonerpatrone bereit zu halten.
Fehlerbehebung Konfigurieren der IEEE 802.1X-Authentisierungseinstellungen(P. 267) N.überein. For./Einst. Das über das Bedienfeld eingestellte Papierformat entspricht dem Format des eingelegten Papiers nicht. ● Achten Sie darauf, dass das in eingestellte Papierformat dem Format des tatsächlich eingelegten Papiers entspricht. So verwenden Sie das eingelegte Papier Ändern Sie die Einstellung in so, dass sie dem Format des eingelegten Papiers entspricht.
Fehlerbehebung Die Anzahl der eingegebenen Zeichen ist falsch oder es wurden ungültige Zeichen verwendet. Der Netzwerkschlüssel (WPA-/WPA2-PSK- oder WEP-Schlüssel) eines Wireless LAN-Routers wurde nicht richtig eingegeben. ● Prüfen Sie den Netzwerkschlüssel (WPA-/WPA2-PSK- oder WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät.
Fehlerbehebung Patrone (Gelb): Ende der Lebensdauer. Die Tonerpatrone hat das Ende der Lebensdauer erreicht. ● Die Tonerpatrone muss ausgetauscht werden. Schritte für das Austauschen der Tonerpatrone(P.
Fehlerbehebung Gegenmaßnahmen für den jeweiligen Fehlercode 2529-075 Wenn ein Fehler auftritt, wie beispielsweise ein nicht erfolgreich abgeschlossener Druckvorgang, oder wenn Sie ein IFax nicht empfangen können, wird ein entsprechender Fehlercode auf dem Auftragslog-Bildschirm als dreistellige Zahl angezeigt. Schauen Sie sich im Folgenden die möglichen Ursachen und Lösungen zu den jeweiligen Fehlercodes an. Näheres zum Auftragslog-Bildschirm finden Sie unter Bildschirm (P. 110) .
Fehlerbehebung #701 Die Authentisierung ist fehlgeschlagen, weil bei aktivierter Verwaltung per Abteilungs-ID eine falsche Abteilungs-ID oder PIN eingegeben wurde. ● Geben Sie die richtige Abteilungs-ID und PIN ein. Es wurde versucht, ohne Eingabe einer Abteilungs-ID fortzufahren, obwohl in der Verwaltung per Abteilungs-ID Aufträge mit unbekannter ID (Funktionen, die das Ausführen von Aufgaben ohne Abteilungs-ID und PIN zulassen) deaktiviert wurden.
Fehlerbehebung #802 Der POP3-Servername ist nicht korrekt eingestellt. ● Stellen Sie den POP3-Servernamen richtig ein. Empfangen von I-Faxe für das Drucken(P. 195) #810 Beim Empfangen eines I-Faxes wurde vom POP3-Server ein Fehler zurückgemeldet. ● Prüfen Sie, ob der POP3-Server richtig konfiguriert ist. ● Prüfen Sie, ob der E-Mail-Server und das Netzwerk richtig funktionieren. Weitere Informationen erhalten Sie bei Ihrem Netzwerkadministrator.
Fehlerbehebung #821 Die empfangenen Daten werden nicht unterstützt (bei der TIFF-Analyse ist ein Fehler aufgetreten). ● Wenden Sie sich an den Absender, und bitten Sie ihn, die Einstellungen zu überprüfen und die Daten dann erneut zu senden. #822 Eine Datei auf einem USB-Speichergerät konnte nicht gedruckt werden, weil das Format der Datei nicht unterstützt wird. ● Überprüfen Sie die unterstützten Dateiformate, und speichern Sie die Datei erneut. Druckerfunktionen(P.
Fehlerbehebung Das Drucken wurde vom Computer aus abgebrochen. ● Wenn die Druckdaten von einem Computer zum Gerät gesendet werden und Sie einen Vorgang abbrechen, wird dieser Fehlercode angezeigt. Dabei handelt es sich aber nicht um eine Funktionsstörung. Drucken Sie die Dokumente gegebenenfalls erneut. Ein geschütztes Dokument, das nicht gedruckt wurde, wurde gelöscht.
Fehlerbehebung ● Empfangen Sie das Dokument gegebenenfalls erneut.
Fehlerbehebung Beheben von Papierstaus 2529-076 Wenn es zu einem Papierstau kommt, wird auf dem Bildschirm angezeigt. Wählen Sie ( ), um einfache Lösungen anzuzeigen. Wenn die Schritte am Display schwer zu verstehen sind, lesen Sie die folgenden Abschnitte zur Behebung von Papierstau. LBP654Cx / LBP653Cdw Ausgabefach Papierstau in der Haupteinheit(P. 513) Mehrzweckfach/ Papierkassette Papierstau in der Papierzufuhr(P. 516) Rückseite Papierstau in der Haupteinheit(P.
Fehlerbehebung Wenn Papier reißt ● Entfernen Sie alle Papierstückchen, damit diese keinen weiteren Papierstau verursachen. Wenn sich das Papier wiederholt staut ● Klopfen Sie mit dem Papierstapel auf eine ebene Fläche, um die Kanten des Papiers auszurichten, bevor Sie ihn in das Gerät einlegen. ● Prüfen Sie, ob das Papier für das Gerät geeignet ist. Geeignetes Papier(P. 536) ● Vergewissern Sie sich, dass keine gestauten Papierstückchen im Gerät zurückbleiben.
Fehlerbehebung Papierstau in der Haupteinheit 2529-077 Entfernen Sie das gestaute Papier gemäß den Schritten, die der Position entsprechen, an der ein Papierstau aufgetreten ist. LBP654Cx / LBP653Cdw Ausgabefach Papierstau im Ausgabebereich(P. 513) Rückseite Papierstau an der Rückseite(P. 513) LBP613Cdw / LBP611Cn Ausgabefach/Rückseite Papierstau an der Vorder- und der Rückseite(P.
Fehlerbehebung 1 Öffnen Sie die hintere Abdeckung. 2 Ziehen Sie das Papier behutsam heraus. 3 Heben Sie die Duplexeinheit an. 4 Ziehen Sie das Papier behutsam heraus. 5 Schließen Sie die hintere Abdeckung.
Fehlerbehebung Papierstau an der Vorder- und der Rückseite Entfernen Sie das gestaute Papier nicht mit Gewalt aus dem Gerät. Wenn sich das gestaute Papier nicht leicht herausnehmen lässt, fahren Sie mit dem nächsten Schritt fort. 1 Ziehen Sie das Papier behutsam heraus. 2 Öffnen Sie die hintere Abdeckung. 3 Ziehen Sie das Papier behutsam heraus. 4 Schließen Sie die hintere Abdeckung.
Fehlerbehebung Papierstau in der Papierzufuhr 2529-078 Entfernen Sie das gestaute Papier gemäß den Schritten, die der Position entsprechen, an der ein Papierstau aufgetreten ist. LBP654Cx / LBP653Cdw Mehrzweckfach Papierstau im Mehrzweckfach(P. 516) Papierkassette Papierstau in der Papierkassette(P. 519) LBP613Cdw / LBP611Cn Manuelle Zufuhr Papierstau in der manuellen Zufuhr(P. 518) Papierkassette Papierstau in der Papierkassette(P.
Fehlerbehebung 2 1 Nehmen Sie das gestaute Papier aus dem Geräteinneren heraus. Ziehen Sie die Papierkassette heraus. ● Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Drücken Sie die grüne Taste. ➠ Die Transportführung wird abgesenkt. 3 3 Ziehen Sie das Papier behutsam heraus.
Fehlerbehebung 4 Setzen Sie die Papierkassette ein. ● Wenn Sie die Papierkassette bei auf gesetzter Option einsetzen, wird ein Bestätigungsbildschirm angezeigt. 5 (P. 424) Wählen Sie , wenn die Meldung auf dem Bildschirm angezeigt wird.
Fehlerbehebung 3 Ziehen Sie das Papier behutsam heraus. 4 Führen Sie die Transportführung vorsichtig gerade ein. ● Schieben Sie die Transportführung wieder zurück, bis sie mit einem Klicken einrastet. 5 Setzen Sie die Papierkassette ein. ● Wenn Sie die Papierkassette bei auf gesetzter Option einsetzen, wird ein Bestätigungsbildschirm angezeigt. (P.
Fehlerbehebung ● Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Ziehen Sie das Papier behutsam heraus. ● Wenn die optionale Kassetteneinheit angebracht ist, ziehen Sie das Papier vorsichtig auf die gleiche Weise heraus. 3 Setzen Sie die Papierkassette ein. ● Wenn Sie die Papierkassette bei auf
Fehlerbehebung Wenn sich ein Problem nicht beheben lässt 2529-079 Wenn Sie ein Problem anhand der Informationen in diesem Kapitel nicht beheben können, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support. Zerlegen Sie das Gerät nicht, und reparieren Sie es nicht selbst ● Wenn Sie das Gerät zerlegen oder selbst reparieren, erlischt unter Umständen die Garantie.
Anhang Anhang Anhang ................................................................................................................................................................. 523 Software von Drittanbietern ............................................................................................................................ 525 Praktische Funktionen ......................................................................................................................................
Anhang Anhang 2529-07A Dieses Kapitel enthält technische Daten dieses Geräts, Anweisungen zur Verwendung der Anwenderhandbuch, Haftungsausschluss, Copyright-Informationen und andere wichtige Informationen für die Kunden. ◼ Technische Daten des Geräts Weitere Informationen finden Sie in den folgenden Abschnitten, wenn Sie die Spezifikationen der Haupteinheit und die optionale Ausstattung, die Netzwerkumgebung, die Druckfunktion und so weiter überprüfen möchten. Technische Daten(P.
Anhang Software von Drittanbietern(P. 525) Praktische Funktionen(P. 526) Grundfunktionen in Windows(P. 558) Hinweise(P.
Anhang Software von Drittanbietern 2529-07C Für Informationen zu Software von Drittanbietern klicken Sie auf die folgenden Symbole.
Anhang Praktische Funktionen 2529-07E In diesem Abschnitt werden Tipps für die Nutzung der Funktionen des Geräts anhand der Kategorie erläutert. Sie können die Funktionen anhand ihrer vorgesehenen Zwecke und der Betriebsumgebung nutzen. Umweltfreundlich Geld sparen(P. 527) Effizienzfunktionen(P. 528) Weitere Funktionen(P.
Anhang Umweltfreundlich Geld sparen 2529-07F Es gibt viele Möglichkeiten, Papier, Toner, Strom und Kosten zu sparen. Doppelseitiger Druck Schlafmodus Den doppelseitigen Druck können Sie für das Drucken von Daten von Ihrem Computer und empfangener I- Ein Schlafmodus, in dem sich das Gerät bei Nichtbenutzung ausschaltet, um den Stromverbrauch und damit die Kosten zu reduzieren, ist heutzutage ein absolutes Muss.
Anhang Effizienzfunktionen 2529-07H Hier sind einige einfache Bedienfolgen, die komplizierte Aufgaben effizienter gestalten können. Bilder direkt von einem USB-Speichergerät drucken Remote-Management mit Remote UI Wenn Sie ein USB-Speichergerät an das Gerät anschließen, können Sie Bilder und Dokumente ohne Mit Remote UI können Sie viele Managementfunktionen vom Computer aus ausführen, ohne das Gerät selbst bedienen zu müssen.
Anhang Sie können das Seitenlayout, die Bindungsposition, das Umschalten zwischen einseitigem und doppelseitigem Druck usw. intuitiv auf dem Vorschaubild im Druckertreiber angeben. Mit dem einfachen Klick-Vorgang können Sie Einstellungen bequem angeben, während Sie sehen, wie die Einstellungen angewendet werden. Drucken von einem Computer(P.
Anhang Weitere Funktionen 2529-07J Es gibt eine Vielzahl von Funktionen für alles, was Sie tun müssen - zu Hause, im Büro und wenn Sie unterwegs sind. Verwenden eines Smartphones/Tablets Einfaches Drucken mit Google Cloud Print Wenn Sie beispielsweise schnell ein Angebot ausdrucken möchten, welches Sie auf dem Weg zu einem Stellen Sie über einen Laptop oder ein Smartphone eine Verbindung zu Google Cloud Print her, senden Sie die Daten, und die gewünschten Dokumente werden gedruckt.
Anhang Normalerweise werden gedruckte Dokumente am Drucker sofort ausgegeben. Bei vertraulichen Dokumenten ist dies jedoch unter Umständen nicht erwünscht. Mit dem geschützten Druck können Dokumente nur gedruckt werden, wenn am Bedienfeld des Geräts das entsprechende Passwort eingegeben wird. So können Sie verhindern, dass vertrauliche Dokumente am Drucker liegen und dort von jedem eingesehen werden können. Ein durch eine PIN geschütztes Dokument drucken (Geschützter Druck)(P.
Anhang Technische Daten 2529-07K Die technischen Daten können bei Produktverbesserungen oder künftigen Versionen ohne Vorankündigung geändert werden. ◼ Technische Daten des Geräts Haupteinheit(P. 533) Geeignetes Papier(P. 536) ◼ Technische Daten der optionalen Ausstattung Kassetteneinheit AF(P. 540) ◼ Technische Daten der Funktionen Druckerfunktionen(P. 541) Verwaltungsfunktionen(P. 543) ◼ Umgebung für die Verwendung des Geräts Systemumgebung(P. 545) Netzwerkumgebung(P.
Anhang Haupteinheit 2529-07L ● Weitere Informationen zu den Papierformaten und Papiertypen der jeweiligen Papierzufuhr finden Sie unter " Geeignetes Papier(P. 536) ." Typ Desktop Farbunterstützt Vollfarbdruck Auflösung für das Schreiben 600 x 600 dpi Geeignetes Papier Papierformate LBP654Cx / LBP653Cdw: ● Max.: 215,9 x 355,6 mm*1 ● Min. (Papierkassette): 100 x 148 mm ● Min. (Mehrzweckfach): 76,2 x 127 mm LBP613Cdw / LBP611Cn: ● Max.: 215,9 x 355,6 mm*1 ● Min.
Anhang Druckgeschwindigkeit *4 LBP654Cx / LBP653Cdw: (Normal A4, 100%) ● Vollfarbe:: 27 Blatt/Minute ● Schwarzweiß:: 27 Blatt/Minute LBP613Cdw / LBP611Cn: ● Vollfarbe:: 18 Blatt/Minute ● Schwarzweiß:: 18 Blatt/Minute Papierzufuhrsystem/Kapazität *5 LBP654Cx / LBP653Cdw: Papierkassette 250 Blatt (80 g/m²) / 250 Blatt (64 g/m²) x 1 Mehrzweck-Fach 50 Blatt (80 g/m²) / 50 Blatt (64 g/m²) x 1 LBP613Cdw / LBP611Cn: Papierkassette 150 Blatt (80 g/m²) / 150 Blatt (64 g/m²) x 1 Mehrzweck-Fach 1 Blatt Papieraus
Anhang Bei ausgeschalteter Hauptstromversorgung 0,3 W oder weniger Abmessungen (B x T x H) LBP654Cx: 476 x 469 x 379 mm LBP653Cdw: 437 x 469 x 313 mm LBP613Cdw / LBP611Cn: 430 x 418 x 274 mm Gewicht LBP654Cx: Circa 21,0 kg (einschließlich Tonerpatronen) LBP653Cdw: Circa 20,5 kg (einschließlich Tonerpatronen) LBP613Cdw / LBP611Cn: Circa 15,5 kg (einschließlich Tonerpatronen) Platzbedarf bei Aufstellung *6 LBP654Cx: (B x L) 476 x 1.112 mm LBP653Cdw: 437 x 1.112 mm LBP613Cdw / LBP611Cn: 430 x 1.
Anhang Geeignetes Papier 2529-07R Die Papiertypen, die mit diesem Gerät verwendet werden können, werden in der folgenden Tabelle angezeigt.
Anhang Papierkassette *1 Mehrzweck-Fach Automatischer doppelseitiger Druck *2 Papierformate Briefumschlag Monarch *5 *6 Briefumschlag C5 *6 Briefumschlag DL *6 Anwenderdefiniertes Papierformat *1Beinhaltet *2Der *7 *8 *9 die optionale Kassetteneinheit AF. automatische doppelseitige Druck steht ohne erneutes Einlegen des Papiers zur Verfügung. *3Lässt Sie die empfangenen I-Faxdokumente drucken. *4Ermöglicht *5Nur es Ihnen, Berichte oder Listen zu drucken. für LBP613Cdw / LBP611Cn.
Anhang Papierkassette *1 Mehrzweck-Fach Automatischer doppelseitiger Druck *2 Papiertyp Schwer 2 120 bis 128 g/m² Schwer 3 129 bis 163 g/m² Recycling 1 *3*4 60 bis 70 g/m² Recycling 2 *3*4 71 bis 82 g/m² Farbe *3*4 71 bis 82 g/m² Beschichtet 1 100 bis 120 g/m² Beschichtet 2 121 bis 150 g/m² Beschichtet 3 151 bis 200 g/m² Etiketten Briefumschlag *1Beinhaltet *2Der die optionale Kassetteneinheit AF. automatische doppelseitige Druck steht ohne erneutes Einlegen des Papiers zur Verfügung.
Anhang Papiertyp Papierkassette Manuelle Zufuhr Automatischer doppelseitiger Druck *1 Recycling 1 *2*3 60 bis 70 g/m² Recycling 2 *2*3 71 bis 82 g/m² Farbe *2*3 71 bis 82 g/m² Beschichtet 1 100 bis 120 g/m² Beschichtet 2 121 bis 150 g/m² Beschichtet 3 151 bis 200 g/m² *4 Etiketten Briefumschlag *1Der *4 automatische doppelseitige Druck steht ohne erneutes Einlegen des Papiers zur Verfügung. *2Lässt Sie die empfangenen I-Faxdokumente drucken.
Anhang Kassetteneinheit AF 2529-07S Papierformate ● Max.: 215,9 x 355,6 mm ● Min.: 100 x 148 mm Papiergewicht 52 bis 163 g/m²*1 Kapazität der Papierkassetten *2 550 Blatt (80 g/m²) / 640 Blatt (64 g/m²) x 1 Abmessungen 437 x 469 x 136 mm (B x T x H) Gewicht Circa 8,5 kg *1Bei beschichtetem Papier beträgt das maximale zulässige Papiergewicht 200 g/m². *2Kann je nach Installationsumgebung und verwendetem Papier variieren.
Anhang Druckerfunktionen 2529-07U ◼ UFR II Druckerfunktion Typ Intern Druckgröße Geeignetes Papier(P. 536) Druckgeschwindigkeit Haupteinheit(P. 533) Auflösung Datenverarbeitung 1200 dpi x 1200 dpi, 600 dpi x 600 dpi Seitenbeschreibungssprache (PDL) UFR II Unterstütztes Protokoll Netzwerkumgebung(P. 546) Residente Schriftarten Keine Schnittstelle USB USB 2.0 Hi-Speed Wired LAN 10Base-T, 100Base-TX, 1000Base-T Wireless LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.
Anhang Residente Schriftarten PCL Schriftarten LBP654Cx 93 Roman, 10 Bitmap Schriftarten, 2 OCR Schriftarten LBP653Cdw / LBP613Cdw 45 Roman, 10 Bitmap Schriftarten PS Schriftarten 136 Roman Schnittstelle USB USB 2.0 Hi-Speed Wired LAN 10Base-T, 100Base-TX, 1000Base-T Wireless LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.11n ◼ Speichermedium Druckfunktion Druckbare Dateiformate ● JPEG (DCF/Exif 2.21 oder früher/JFIF) ● TIFF (JPEG-/MH-/MR-/MMR-Komprimierung) ● PDF (Version 1.
Anhang Verwaltungsfunktionen 2529-07W ◼ Firewall-Einstellungen ● Bis zu 16 IP-Adressen (oder Bereiche von IP-Adressen) können für IPv4 und IPv6 angegeben werden. ● Die in diesem Abschnitt beschriebenen Paketfilter steuern die Kommunikation über TCP, UDP und ICMP. ● Bis zu 32 MAC-Adressen können angegeben werden. ◼ IPSec ● Das von dem Gerät unterstützte IPSec-Protokoll entspricht RFC2401, RFC2402, RFC2406 und RFC4305.
Anhang ◼ Registrierung der Schlüssel und Zertifikate ● Ein Schlüssel und Zertifikat, das mit diesem Gerät generiert wird, entspricht X.509v3. Wenn Sie einen Schlüssel oder ein Zertifizierungsstellenzertifikat von einem Computer installieren, muss dieses die folgenden Anforderungen erfüllen: ● Schlüssel: PKCS#12*1 Format ● Zertifizierungsstellenzertifikat: X.509v1 oder X.509v3, DER-codiert-binär, PEM ● Schlüssel: ".p12" oder ".pfx" Dateierweiterung ● Zertifizierungsstellenzertifikat: ".cer" oder ".
Anhang Systemumgebung 2529-07X Systemanforderungen für WSD ● Windows Vista/7/8/10 Systemanforderungen für Remote UI *1 Windows ● Windows Vista/7/8/10 ● Microsoft Internet Explorer 9.0 und höher macOS ● Mac OS X 10.5.8 und höher (mit Ausnahme der Classic-Umgebung) ● Safari 5.0.6 und höher Serversoftware für den Empfang von I-Fax ● Microsoft Exchange Server 2007 ● Microsoft Exchange Server 2010 ● Microsoft Exchange Server 2013 ● Lotus Domino R6.0 und höher ● Qpopper 2.
Anhang Netzwerkumgebung 2529-07Y ◼ Allgemeine technische Daten Unterstütztes Protokoll Kommunikationsprotokoll TCP/IP (Frametyp: Ethernet II) Druckprotokoll ● LPD ● RAW ● WSD ◼ Wired LAN-Spezifikationen Schnittstelle 10Base-T, 100Base-TX, 1000Base-T ◼ Technische Daten des Wireless LAN Standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Übertragungsverfahren IEEE 802.11b (Modulationssystem: DS-SS) IEEE 802.11g (Modulationssystem: OFDM-Verfahren) IEEE 802.
Anhang Optionen 2529-080 Durch das Installieren von Optionen am Gerät können Sie mehr Funktionen nutzen. ◼ Wissen, welche Arten von Optionen verfügbar sind Optionale Ausstattung(P. 548) Systemoptionen(P. 549) ◼ Suchen nach optionaler Ausstattung anhand des Zwecks Hinzufügen einer Papierkassette Kassetteneinheit AF(P.
Anhang Optionale Ausstattung 2529-081 Die Funktionalität des Geräts kann mit der unten beschriebenen optionalen Ausstattung voll genutzt werden. Optionale Ausstattung kann über die Einzelhandelsverkaufsstelle, bei der Sie das Gerät erworben haben, oder über Ihren Canon Händler vor Ort erworben werden. Kassetteneinheit AF Wenn Sie diese Kassetteneinheit installieren, können Sie Papier in einem anderen Format als dem in der Standardkassette einlegen.
Anhang Systemoptionen 2529-082 Die Geräteleistung kann durch die Installation der Systemoptionen noch mehr gesteigert werden. Barcode Printing Kit(P. 549) Lizenzregistrierung(P. 549) Barcode Printing Kit Mit dieser Option können Sie Barcodes in verschiedenen Formaten generieren. Beachten Sie, dass für den Druck von Barcodes PCL aktiviert sein muss. Informationen zur Verwendung des Barcode Printing Kit finden Sie im Bar Code Druckerhandbuch (PDF-Handbuch).
Anhang 4 Bestätigen Sie die Meldung auf dem Bildschirm, und wählen Sie . 5 Geben Sie mit den Zahlentasten den Lizenzschlüssel ein, und wählen Sie . ➠ Die Registrierung wird gestartet. Warten Sie, bis die Meldung angezeigt wird. ● Wenn die Meldung
Anhang Handbücher und ihre Inhalte 2529-083 Die unten genannten Dokumente werden mit dem Gerät geliefert. Schlagen Sie bei Bedarf darin nach. Erste Schritte Lesen Sie dieses Dokument als Erstes. Darin wird vom Entfernen des Verpackungsmaterials bis zur Konfiguration des Geräts das grundlegende Vorgehen zur Inbetriebnahme beschrieben. LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Anwenderhandbuch (diese Anleitung) In dieser Anleitung werden alle Funktionen des Geräts beschrieben.
Anhang Verwenden von Anwenderhandbuch 2529-084 Die Anwenderhandbuch ist ein Handbuch, das auf dem Computer oder einem Mobilgerät angezeigt werden kann und alle Funktionen des Geräts beschreibt. Sie können nach der geplanten Verwendung suchen oder ein Schlüsselwort eingeben, um schnell die gesuchte Seite zu finden. In diesem Abschnitt wird das Bildschirmlayout der Anwenderhandbuch beschrieben und wie Sie die Anleitung lesen.
Anhang Bildschirmlayout von Anwenderhandbuch 2529-085 Die Anwenderhandbuch ist auf mehrere Bildschirme unterteilt und der Inhalt jedes Bildschirms variiert. Startseite Wird beim Starten der Anwenderhandbuch angezeigt. / Klicken Sie auf , um alle Abschnitte unter den Kapiteln anzuzeigen. Klicken Sie auf vorherigen Anzeige zurückzukehren. , um zur / Klicken Sie hier, um die Anzeige zwischen Inhalt und Suche umzuschalten.
Anhang Klicken Sie hier, um wichtige Informationen zur Verwendung des Geräts anzuzeigen. Themenseite Enthält Informationen zur Konfiguration und Verwendung des Geräts. Navigation Hier sehen Sie, welches Kapitelthema Sie derzeit anzeigen. Klicken Sie hier, um zu der entsprechenden Seite zu springen. Um zur vorherigen Seite zurückzukehren, klicken Sie in Ihrem Webbrowser auf "Zurück." / Klicken Sie auf , um die ausgeblendeten detaillierten Beschreibungen anzuzeigen.
Anhang [Schlüsselwörter hier eingeben] , um die Geben Sie ein Schlüsselwort oder mehrere Schlüsselwörter ein, und klicken Sie auf Suchergebnisse anzuzeigen. Sie können nach Seiten suchen, die alle Schlüsselwörter enthalten, indem Sie die Schlüsselwörter durch ein Leerzeichen trennen. Sie können auch nach Seiten suchen, die eine exakte Übereinstimmung enthalten, indem Sie die Schlüsselwörter in Anführungszeichen setzen.
Anhang Anzeigen des Anwenderhandbuch 2529-086 In diesem Abschnitt werden Markierungen, Schaltflächen, Bildschirme und andere Elemente erläutert, die im Anwenderhandbuch verwendet werden. Die Warnungen und Vorsichtsmaßregeln finden Sie auch unter "Wichtige Sicherheitshinweise" in "Erste Schritte" aus dem Lieferumfang des Geräts. Schauen Sie sich auch diese Anweisungen an.
Anhang / / (Schwarzweiß LCD-Modell) , und auf dem Bedienfeld werden zur Auswahl des gewünschten Elements in den Einstellungen verwendet, jedoch wird deren Beschreibung im Anwenderhandbuch weggelassen. Die Vorgehensweise bei der oder und Drücken von wird im Anwenderhandbuch, wie unten Auswahl von mithilfe von gezeigt, dargestellt. 1 Wählen Sie .
Anhang Grundfunktionen in Windows 2529-088 Anzeigen des Druckerordners(P. 558) Aktivieren der [Netzwerkerkennung](P. 558) Anzeigen der freigegebenen Drucker auf dem Druckserver(P. 559) Drucken einer Testseite in Windows(P. 560) Überprüfen der Systemarchitektur(P. 561) Überprüfen des Druckeranschlusses(P. 562) Überprüfen der bidirektionalen Kommunikation(P. 563) Überprüfen der SSID, mit der Ihr Computer verbunden ist(P. 564) Beim Drucken über die Windows Store App(P.
Anhang Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm wählen Sie [Systemsteuerung] [Netzwerkstatus und -aufgaben anzeigen] [Erweiterte Freigabeeinstellungen ändern] wählen Sie [Netzwerkerkennung einschalten] unter [Netzwerkerkennung]. Windows 8.
Anhang ◼ Drucken einer Testseite in Windows Sie können prüfen, ob der Druckertreiber funktioniert, indem Sie in Windows eine Testseite drucken. 1 2 3 4 Legen Sie Papier im Format A4 in das Mehrzweckfach ein. Einlegen von Papier in das Mehrzweckfach(P. 135) Öffnen Sie den Druckerordner. Anzeigen des Druckerordners(P. 558) Klicken Sie mit der rechten Maustaste auf das Druckertreibersymbol dieses Geräts, und klicken Sie dann auf [Druckereigenschaften] oder [Eigenschaften].
Anhang ➠ Die Testseite wird gedruckt. ◼ Überprüfen der Systemarchitektur Wenn Sie nicht wissen, ob auf Ihrem Computer die 32- oder 64-Bit-Version von Windows ausgeführt wird, gehen Sie wie folgt vor. 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008 [Start] wählen Sie [Systemsteuerung]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm Windows 8.1/Server 2012 R2 Klicken Sie mit der rechten Maustaste auf [Start] wählen Sie [Systemsteuerung].
Anhang ◼ Überprüfen des Druckeranschlusses 1 2 3 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners(P. 558) Klicken Sie mit der rechten Maustaste auf das Druckertreibersymbol dieses Geräts, und klicken Sie dann auf [Druckereigenschaften] oder [Eigenschaften]. Vergewissern Sie sich auf der Registerkarte [Anschlüsse], dass der Anschluss (Port) korrekt ausgewählt ist.
Anhang Wenn Sie eine Netzwerkverbindung verwenden und die IP-Adresse des Geräts geändert haben ● Sie müssen einen neuen Anschluss hinzufügen. Konfigurieren von Druckerports(P. 54) ◼ Überprüfen der bidirektionalen Kommunikation 1 2 3 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners(P. 558) Klicken Sie mit der rechten Maustaste auf das Druckertreibersymbol dieses Geräts, und klicken Sie dann auf [Druckereigenschaften] oder [Eigenschaften].
Anhang ◼ Überprüfen der SSID, mit der Ihr Computer verbunden ist Wenn Ihr Computer mit einem Wireless LAN-Netzwerk verbunden ist, klicken Sie auf Taskleiste, um die SSID des verbundenen Wireless LAN-Routers anzuzeigen. , , oder in der ◼ Beim Drucken über die Windows Store App Windows 8/Server 2012 Rufen Sie die Charms auf der rechten Seite des Bildschirms auf Treiber, den Sie verwenden [Drucken]. Tippen oder klicken Sie auf [Geräte] Der Windows 8.
Anhang Hinweise 2529-089 ◼ Internationales ENERGY STAR-Programm Als ENERGY STAR® Partner erklärt Canon, dass dieses Produkt dem ENERGY STARProgramm für Energieeffizienz entspricht. Das ENERGY STAR-Programm ist ein internationales Programm zur Förderung der Energieeinsparung bei Verwendung von Computern und anderen Bürogeräten. Im Rahmen dieses Programms wird die Entwicklung und Verbreitung von Produkten gefördert, die über Energiesparfunktionen verfügen.
Anhang ◼ WEEE- und Batterie-Richtlinie Nur für Europäische Union und EWR (Norwegen, Island und Liechtenstein) Diese Symbole weisen darauf hin, dass dieses Produkt gemäß WEEE-Richtlinie (2012/19/EU; Richtlinie über Elektro- und Elektronik-Altgeräte), Batterien-Richtlinie (2006/66/EG) und nationalen Gesetzen zur Umsetzung dieser Richtlinien nicht über den Hausmüll entsorgt werden darf.
Anhang EINEN BESTIMMTEN ZWECK UND PATENTVERLETZUNG. CANON INC. HAFTET NICHT FÜR DIREKTE UND BEILÄUFIG ENTSTANDENE SCHÄDEN ODER FOLGESCHÄDEN JEDWEDER ART SOWIE FÜR EINKOMMENSVERLUSTE, DIE AUS DER NUTZUNG DIESE MATERIALS ENTSTEHEN. ◼ Markenzeichen Adobe, Acrobat und Reader sind eingetragene Warenzeichen der Adobe Systems Incorporated in den USA und/oder anderen Ländern. Apple, Bonjour, iPad, iPhone, iPod touch, Mac, macOS, OS X und Safari sind Warenzeichen der Apple Inc.
Anhang Das PDF-Logo ist ein Markenzeichen oder eingetragenes Markenzeichen von Adobe Systems Incorporated in den USA und anderen Ländern. Copyright © 2008 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated.
Anhang ● Reisepässe ● Briefmarken (gestempelt oder ungestempelt) ● Einwanderungspapiere ● Erkennungsmarken oder Ehrenabzeichen ● Steuermarken (gestempelt oder ungestempelt) ● Bestimmte Dienst- oder Entwurfspapiere ● Anleihen oder andere Schuldverschreibungen ● Ausgestellte Schecks oder Wechsel von Regierungsbehörden ● Aktienzertifikate ● Fahrzeugscheine und Fahrzeugbriefe ● Urheberrechtlich geschützte Werke/Kunstwerke ohne Genehmigung der Urheberrechtinhaber V_160913 569
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.
Drittleistungen Wenn Sie Drittleistungen durch das PRODUKT verwenden, dann unterliegen diese Leistungen den nachfolgenden Bedingungen.
Software in Abhängigkeit zusätzlicher Lizenzbestimmungen Weitere Details und entsprechende Lizenzbedingungen finden Sie in der nachstehenden Tabelle mit der Software und den zugehörigen Lizenzbestimmungen.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
Drittleistungen Wenn Sie Drittleistungen durch das PRODUKT verwenden, dann unterliegen diese Leistungen den nachfolgenden Bedingungen.
Software in Abhängigkeit zusätzlicher Lizenzbestimmungen Weitere Details und entsprechende Lizenzbedingungen finden Sie in der nachstehenden Tabelle mit der Software und den zugehörigen Lizenzbestimmungen.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
Drittleistungen Wenn Sie Drittleistungen durch das PRODUKT verwenden, dann unterliegen diese Leistungen den nachfolgenden Bedingungen.
Software in Abhängigkeit zusätzlicher Lizenzbestimmungen Weitere Details und entsprechende Lizenzbedingungen finden Sie in der nachstehenden Tabelle mit der Software und den zugehörigen Lizenzbestimmungen.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
HarfBuzz 2012-07-30 Copyright (C) 2006 Behdad Esfahbod Copyright (C) 1998-2004 David Turner and Werner Lemberg Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies) Copyright (C) 2004,2007 Red Hat, Inc. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and its documentation for any purpose, provided that the above copyright notice and the following two paragraphs appear in all copies of this software.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Lua Copyright © 1994–2014 Lua.org, PUC-Rio.
LuaSocket LuaSocket 2.0.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.