LBP654Cx / LBP653Cdw / LBP613Cdw / LBP611Cn Gebruikershandleiding USRMA-2090-03 2018-04 nl Copyright CANON INC.
Inhoudsopgave Belangrijke veiligheidsinstructies .................................................................................................. Installatie ................................................................................................................................................................. 3 Elektrische aansluiting Hantering 2 .............................................................................................................................................. 5 ..
Voorzijde ........................................................................................................................................................... 88 Een USB-geheugenapparaat plaatsen ............................................................................................................. 90 Achterzijde ......................................................................................................................................................... 92 Binnenzijde ........
Aan mobiele apparaten koppelen ............................................................................................... 197 Verbinden met mobiele apparaten ........................................................................................................................ 198 Verbinding maken via een draadloos LAN router (LAN-verbinding) Direct verbinden (toegangspuntmodus) ..............................................................................................................
................................................................................................................................... 298 .......................................................................................................................... 302 ............................................................................................................................ 303 .....................
Het afdrukresultaat is niet goed ......................................................................................................................... 469 Het papier krult om of is gekreukeld Papier is onjuist ingevoerd ................................................................................................................... 481 .................................................................................................................................
Belangrijke veiligheidsinstructies Belangrijke veiligheidsinstructies Belangrijke veiligheidsinstructies ............................................................................................................ 2 Installatie ............................................................................................................................................................... 3 Elektrische aansluiting .................................................................................................
Belangrijke veiligheidsinstructies Belangrijke veiligheidsinstructies 258A-000 De informatie in dit hoofdstuk is bedoeld om beschadiging van eigendommen te voorkomen, evenals lichamelijk letsel van gebruikers van het apparaat en anderen in de buurt van het apparaat. Lees deze informatie zorgvuldig door voordat u het apparaat gaat gebruiken en volg de instructies om het apparaat op de juiste manier te gebruiken. U mag alleen handelingen uitvoeren die in deze handleiding worden beschreven.
Belangrijke veiligheidsinstructies Installatie 258A-001 U kunt dit apparaat alleen veilig en prettig gebruiken als u de volgende voorschriften volgt en het apparaat op een geschikte locatie installeert. (In deze handleiding worden de aanduidingen "apparaat" en "machine" door elkaar gebruikt om naar het product te verwijzen.
Belangrijke veiligheidsinstructies Andere belangrijke aandachtspunten ● Volg de instructies in deze handleiding wanneer u het apparaat gaat dragen. Als u het apparaat niet op de juiste manier draagt, kan het vallen en beschadiging of lichamelijk letsel veroorzaken. ● Let er bij het installeren van het apparaat op dat uw handen niet bekneld raken tussen het apparaat en de vloer of een muur. Dit kan namelijk lichamelijk letsel tot gevolg hebben.
Belangrijke veiligheidsinstructies Elektrische aansluiting 258A-002 ● Gebruik alleen een voeding die voldoet aan de aangegeven spanningsvereisten. Als u dat niet doet, kan dit brand of een elektrische schok tot gevolg hebben. ● Gebruik uitsluitend het netsnoer dat bij het apparaat is geleverd, om brand of een elektrische schok te voorkomen. ● Het meegeleverde netsnoer is bedoeld voor gebruik met deze machine. Sluit het netsnoer niet op andere apparaten aan.
Belangrijke veiligheidsinstructies Hantering 258A-003 ● Haal direct de stekker uit het stopcontact en neem contact op met een erkend Canon-dealer als het apparaat vreemde geluiden maakt, rook of een vreemde geur verspreidt of extreem heet wordt. Als u het apparaat onder die omstandigheden blijft gebruiken, kan dit brand of een elektrische schok tot gevolg hebben. ● Het is niet toegestaan het apparaat te demonteren of aan te passen.
Belangrijke veiligheidsinstructies ● Verplaats het apparaat niet met enige papierlade of de optionele cassette feeding module geïnstalleerd. Ze kunnen dan namelijk vallen en lichamelijk letsel veroorzaken. Laserstraal ● Als de laserstraal mocht vrijkomen, kan blootstelling hieraan leiden tot ernstige beschadiging van uw ogen. Bij het transporteren van het apparaat ● Voer de volgende stappen uit om te voorkomen dat het apparaat tijdens het vervoer wordt beschadigd. - Verwijder de tonercartridges.
Belangrijke veiligheidsinstructies ● Om papierstoringen te voorkomen, mag u tijdens het afdrukken het apparaat niet uitschakelen, de klep niet openen/sluiten en geen papier laden/verwijderen.
Belangrijke veiligheidsinstructies Onderhoud en inspecties 258A-004 Reinig het apparaat regelmatig. Als er sprake is van stofvorming, werkt de machine mogelijk niet goed. Let op de volgende punten als u de machine gaat reinigen. Zie Problemen oplossen(P. 457) als er tijdens gebruik een probleem optreedt. Zie Als een probleem niet kan worden opgelost(P. 516) als u het probleem niet kunt oplossen of wanneer u van mening bent dat de machine moet worden geïnspecteerd.
Belangrijke veiligheidsinstructies Benodigdheden 258A-005 ● Gooi lege tonercartridges en dergelijke niet in open vuur. Bewaar tonercartridges of papier niet op een plek die wordt blootgesteld aan open vuur. Hierdoor kan de toner ontbranden, met brandwonden of brand als gevolg. ● Als u per ongeluk toner morst, ruim het dan op met een zachte, vochtige doek zodat de deeltjes niet worden ingeademd. Gebruik nooit een stofzuiger zonder bescherming tegen stofexplosies om de gemorste toner op te ruimen.
Belangrijke veiligheidsinstructies ● Tenzij nodig, moet u de tonercartridge niet uit het verpakkingsmateriaal of uit dit apparaat nemen. ● De tonercassette is een magnetisch product. Plaats het niet kort bij producten die gevoelig zijn voor magnetisme zoals floppydisks en schijfstations. Dit kan leiden tot beschadigingen aan de data. Tonercartridge bewaren ● Bewaar tonercartridges onder de volgende omstandigheden om een veilige werking en een goed resultaat te garanderen.
Belangrijke veiligheidsinstructies Beschikbaarheidsperiode van vervangende onderdelen, tonercartridges en dergelijke ● Tot een periode van ten minste zeven (7) jaar nadat dit apparaatmodel uit productie is genomen, zullen er vervangende onderdelen, tonercartridges en dergelijke leverbaar zijn. Verpakkingsmateriaal van tonercartridges ● Bewaar het verpakkingsmateriaal van de tonercartridge. U hebt het nodig als u het apparaat gaat vervoeren.
Instellen Instellen Instellen ................................................................................................................................................................ 14 Hoofdfuncties ...................................................................................................................................................... 15 Verplichte voorbereidingen vóór gebruik .........................................................................................................
Instellen Instellen 258A-006 Voordat u de functies van het apparaat gebruikt, moeten eerst de omgevingsvoorwaarden zijn ingesteld. Om te beginnen, controleert u de vereiste reeks om de instelling te voltooien, en realiseert u vervolgens de actuele instellingen. Verplichte voorbereidingen vóór gebruik(P. 16) ● De geïnstalleerde functies op het apparaat verschillen, afhankelijk van het model dat u hebt gekocht. Voordat u het apparaat gebruikt, raadpleegt u Hoofdfuncties(P.
Instellen Hoofdfuncties 258A-007 Deze handleiding behandelt al de functies van de modelserie die u hebt gekocht. Voordat u begint, moet u eerst controleren welke functie aanwezig zijn op het model dat u hebt gekocht.
Instellen Verplichte voorbereidingen vóór gebruik 258A-008 Volg stappen 1 tot en met 3 om het apparaat in te stellen. Als u meer wilt weten over een bepaalde stap, klikt u op de koppeling om naar het desbetreffende gedeelte te gaan. Om de machine veilig te gebruiken, moet u bovendien Onbevoegde toegang voorkomen(P. 17) activeren. Stap 1 Instellen met behulp van de installatiehandleiding(P. 19) Stap 2 De netwerkomgeving instellen(P.
Instellen Onbevoegde toegang voorkomen 258A-009 Dit gedeelte beschrijft de veiligheidsmaatregelen voor het voorkomen van onbevoegde toegang vanuit een extern netwerk. Dit moet absoluut worden gelezen voor alle gebruikers en beheerders voordat zij het apparaat, andere printers en multifunctionele apparaten die op het netwerk zijn aangesloten, gaan gebruiken.
Instellen ● Als een routeerbaar IP-adres is toegewezen aan een printer/multifunctioneel apparaat, kunt u een netwerkomgeving creëren waarin het risico van onbevoegde toegang wordt beperkt, door veiligheidssoftware te installeren, zoals een firewall, die toegang vanuit externe netwerken voorkomt. Als u een routeerbaar IP adres wil toewijzen aan een printer/multifunctioneel apparaat dat u wilt gebruiken, neem dan contact op met uw netwerkbeheerder.
Instellen Instellen met behulp van de installatiehandleiding 258A-00A Als het apparaat voor de eerste keer wordt ingeschakeld ( Het apparaat AAN zetten(P. 101) ), start de instelhandleiding om u te helpen de begininstellingen van het apparaat te realiseren, door de scherm-leidraad te volgen. In de instelhandleiding worden de instelschermen in deze volgorde weergegeven.
Instellen Realiseer de instellingen om met behulp van het draadloos LAN, verbinding te maken met het netwerk. 1 Selecteer . ● Als u selecteert, wordt draadloos LAN niet ingesteld, en de instelhandleiding gaat verder naar stap 5. 2 Selecteer . 3 Selecteer de instelmethode. ● Raadpleeg Verbinding maken met een draadloos LAN(P. 27) voor meer informatie over het draadloos LAN.
Instellen De datum en tijd instellen 258A-00C Stel de datum en tijd in voor het apparaat. De datum en tijd worden gebruikt als de referentie voor de functies die de tijd specificeren, en daarom moeten ze nauwkeurig worden ingesteld. De tijdzone instellen(P. 21) De huidige datum en tijd instellen(P. 21) De zomertijd instellen(P. 22) De tijdzone instellen Als de instelling van de tijdzone wordt veranderd, worden de waarden bij automatisch aangepast.
Instellen 3 Voer de datum en tijd in. Model aanraakscherm ● Tik op het invoerveld, en stel de huidige datum en tijd in. Model zwart-wit LCD ● Druk op of om de cursor te verplaatsen en voer de datum en tijd in met behulp van de numerieke toetsen. 4 Druk op ( ). ● Selecteer een waarde voor voordat u de huidige datum en tijd gaat instellen. Als u de waarde voor later wijzigt, worden de huidige datum en tijd automatisch aangepast.
Instellen De netwerkomgeving instellen 258A-00E Wanneer u de verbinding tot stand brengt van het apparaat met een bekabeld of draadloos lokaal netwerk (LAN), moet u een IP-adres instellen dat uniek is voor het geselecteerde netwerk. Kies voor "bekabeld" of "draadloos", afhankelijk van de communicatie-omgeving en netwerkapparatuur. Neem voor specifieke vragen over de instellingen van het IP-adres contact op met uw internetprovider of de netwerkbeheerder.
Instellen ● Om verbinding te maken met een IEEE 802.1X-netwerk, raadpleegt u verificatie-instellingen configureren(P. 265) . IEEE 802.1X- Kies voor een bekabeld of draadloos LAN. Bedraad LAN of Draadloos LAN selecteren(P. 25) Maak verbinding met een bekabeld of draadloos LAN. ● Ga verder met het gedeelte dat overeenkomt met de instelling die u in stap 2 hebt geselecteerd. Verbinding maken met een bekabeld LAN(P. 26) Verbinding maken met een draadloos LAN(P. 27) Stel zo nodig het IP-adres in.
Instellen Bedraad LAN of Draadloos LAN selecteren 258A-00F Wanneer u een besluit hebt genomen over de verbinding tussen het apparaat en de computer via een bedraad of een draadloos netwerk, selecteert u bedraad of draadloos LAN met het bedieningspaneel. Let op: als u de instelling wijzigt van in of vice versa, zult u de installatie van MF-stuurprogramma's die op uw computer zijn geïnstalleerd, ongedaan moeten maken en ze vervolgens opnieuw moeten installeren.
Instellen Verbinding maken met een bekabeld LAN 258A-00H Sluit de machine via een router aan op een computer. Sluit de machine met een LAN-kabel aan op de router. 1 Sluit een LAN-kabel aan. ● Sluit de machine met een LAN-kabel aan op een router. ● U hoort een klik als de connector van de kabel op zijn plaats klikt. 2 Wacht enkele minuten. ➠ Het IP-adres wordt automatisch ingesteld. ● U kunt het IP-adres handmatig instellen. IP-adressen instellen(P. 40) KOPPELINGEN De netwerkomgeving instellen(P.
Instellen Verbinding maken met een draadloos LAN 258A-00J Als u een draadloze router (of een toegangspunt) gebruikt, loopt de verbinding tussen de machine en een computer via radiogolven. Als uw draadloze router ondersteuning biedt voor Wi-Fi Protected Setup (WPS), kunt u het netwerk automatisch en dus eenvoudig configureren.
Instellen ◼ PIN-modus Sommige WPS-routers bieden geen ondersteuning voor de zogenaamde drukknop-modus. Als op de verpakking of in de documentatie van het netwerkapparaat over WPS en pincodes wordt gesproken, moet u de verbinding instellen door een pincode in te voeren. De verbinding instellen met behulp van de WPS-pincodemodus(P. 31) ● Als de draadloze router is ingesteld voor WEP-verificatie, kunt u mogelijk geen verbinding instellen via WPS.
Instellen De verbinding instellen met behulp van de WPS Drukknop-modus 258A-00K Als uw draadloze router ondersteuning biedt voor de drukknop-modus van WPS, kunt u eenvoudig een verbinding configureren via de WPS-knop. ● De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. 1 Selecteer
Instellen 8 Wacht totdat het bericht wordt weergegeven. 9 Selecteer . ➠ Wacht enkele minuten totdat het IP-adres en andere items automatisch zijn ingesteld. Signaalsterkte ● Als voor een verbinding meerdere draadloze routers beschikbaar zijn, maakt de machine verbinding met het apparaat met het krachtigste signaal. De signaalsterkte wordt gemeten met behulp van RSSI (Received Signal Strength Indication). ● U kunt het IP-adres handmatig instellen. IP-adressen instellen(P.
Instellen De verbinding instellen met behulp van de WPSpincodemodus 258A-00L Als uw draadloze router ondersteuning biedt voor de WPS PIN-modus, genereert u een pincode met de machine en registreert u deze code op het netwerkapparaat. ● De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. Vanaf een computer 1 Ga in een browser naar de instellingen van de draadloze router en geef het scherm weer voor het invoeren van een WPS PIN-code.
Instellen 8 Registreer de gegenereerde pincode op de draadloze router. ● Registreer de pincode in het installatiescherm zoals weergegeven in stap 1. ● U moet de pincode binnen 10 minuten na het selecteren van in stap 7 registreren. Als er een foutbericht verschijnt tijdens het installeren ● Selecteer en ga terug naar stap 6. Vanaf het bedieningspaneel 9 10 Wacht totdat het bericht wordt weergegeven. Selecteer .
Instellen De verbinding instellen door een draadloze router te selecteren 258A-00R U kunt de beschikbare draadloze routers (of toegangspunten) zoeken en een keuze maken uit de display van het apparaat. Geef voor de netwerksleutel een WEP-sleutel op of PSK. Controleer en noteer de benodigde configuratiegegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren(P. 39) ) voordat u een draadloze router selecteert.
Instellen ● Selecteer de router waarvan de SSID overeenkomt met de SSID die u hebt opgeschreven, en druk op ( ). Om details van beveiligingsinstellingen van de Model aanraakscherm te bekijken ● Selecteer de Draadloos LAN router, en selecteer . Om terug te keren naar het vorige scherm, selecteert u . Als uw draadloze router niet wordt gevonden ● Controleer of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk. Installatie-/instellingenproblemen(P.
Instellen Het stroomverbruik verminderen ● U kunt instellen dat de van het apparaat moet worden geactiveerd als er bepaalde signalen van de draadloze router worden ontvangen. (P. 311) Als het IP-adres van het apparaat is gewijzigd ● In een DHCP-omgeving kan het IP-adres van het apparaat automatisch worden gewijzigd. Als dit gebeurt, wordt de verbinding gehandhaafd op voorwaarde dat het apparaat en de computer nog steeds deel uitmaken van hetzelfde subnet.
Instellen De verbinding instellen door gedetailleerde instellingen op te geven 258A-00S Als u gedetailleerde beveiligingsinstellingen wilt opgeven of geen draadloze verbinding tot stand kunt brengen via de andere procedures, kunt u alle benodigde gegevens voor de draadloze verbinding ook zelf invoeren. Controleer en noteer de benodigde gegevens voordat u de instellingen gaat opgeven.
Instellen Hiermee stelt u de verificatiemethode in op Open systeem, ook wel "open verificatie" genoemd. Gebruik de WEP-sleutel als wachtwoord. Wanneer is geselecteerd ● Wanneer u verbinding maakt met een draadloos LAN, treedt er op het apparaat een verificatiefout op als op de draadloze router verificatie met een gedeelde sleutel is ingeschakeld.
Instellen Hiermee wordt automatisch AES-CCMP of TKIP geselecteerd, afhankelijk van de instelling van de draadloze router. Hiermee wordt AES-CCMP ingesteld als de coderingsmethode. 3 Voer de netwerksleutel in die u hebt opgeschreven. ● Voer de netwerksleutel in, en selecteer . 8 Selecteer . Als er een foutbericht verschijnt tijdens het installeren ● Selecteer , controleer of de opgegeven instellingen juist zijn en ga terug naar stap 5.
Instellen De SSID en de netwerksleutel controleren 258A-00U Wanneer u handmatig een draadloze verbinding gaat instellen, moet u de SSID en netwerksleutel van de draadloze router opgeven. De SSID en de netwerksleutel worden mogelijk aangegeven op de router. Controleer het apparaat en noteer de benodigde gegevens voordat u de verbinding gaat instellen. Meer informatie over uw netwerkapparatuur kunt u lezen in de handleidingen of opvragen bij de fabrikant.
Instellen IP-adressen instellen 258A-00W Als u de machine wilt gebruiken in een netwerk, hebt u een uniek IP-adres nodig. Er zijn twee versies van IP-adressen beschikbaar: IPv4 en IPv6. Configureer het IP-adres afhankelijk van de netwerkomgeving. Als u IPv6-adressen wilt gebruiken, moet u de IPv4-adresinstellingen op de juiste manier configureren. IPv4-adres instellen(P. 41) IPv6-adressen instellen(P.
Instellen IPv4-adres instellen 258A-00X Het IPv4-adres van het apparaat kan automatisch worden toegewezen via een speciaal protocol zoals DHCP of het kan handmatig worden ingevoerd. Als u het apparaat verbindt met een bekabeld LAN, zorg er dan voor dat de stekker van de LAN-kabel stevig in de aansluiting zit ( Verbinding maken met een bekabeld LAN(P. 26) ). U kunt de netwerkverbinding indien nodig testen. IPv4-adres instellen(P. 41) De netwerkverbinding testen(P.
Instellen Model aanraakscherm ● Selecteer in , en selecteer . Model zwart-wit LCD ● Selecteer . Als u niet met DHCP/BOOTP/RARP een IP-adres wilt toewijzen ● Selecteer . Als u selecteert wanneer deze diensten niet beschikbaar zijn, zal het apparaat tijd en communicatiemiddelen verspillen met het op het netwerk zoeken naar deze diensten. 3 Controleer of is ingesteld op .
Instellen Als u het IP-adres hebt gewijzigd na de installatie van het printerstuurprogramma ● U moet een nieuwe poort toevoegen. Printerpoorten configureren(P. 54) De netwerkverbinding testen 1 Selecteer
Instellen IPv6-adressen instellen 258A-00Y De IPv6-adressen van het apparaat kunnen worden geconfigureerd via de externe UI. Voordat u IPv6-adressen instelt, moet u de instellingen voor het IPv4-adres controleren ( IPv4-instellingen weergeven(P. 47) ). U moet de juiste IPv4instellingen opgeven om te kunnen werken met IPv6-adressen.
Instellen [Gebruik IPv6] Schakel dit selectievakje in om IPv6 te activeren op het apparaat. Als u IPv6 niet gebruikt, schakelt u het selectievakje uit. [Stateless adres 1] Schakel dit selectievakje in als u een stateless adres gebruikt. Als u geen stateless adres gebruikt, schakelt u het selectievakje uit.
Instellen Controleren of de instellingen juist zijn ● Controleer of het scherm Externe UI kan worden weergegeven op uw computer door het IPv6-adres van het apparaat te gebruiken. De UI op afstand starten(P. 276) Instellingen selecteren vanaf het bedieningspaneel ● De IPv6-instellingen zijn ook bereikbaar via
Instellen Netwerkinstellingen weergeven 258A-010 IPv4-instellingen weergeven(P. 47) IPv6-instellingen weergeven(P. 47) Het MAC-adres weergeven voor Bedraad LAN(P. 47) Het MAC-adres en informatie weergeven voor Draadloos LAN(P. 48) ● Het IP-adres is niet goed geconfigureerd als dit wordt weergegeven als "0.0.0.0". ● Als u het apparaat aansluit op een switching hub of bridge, kan er sprake zijn van een verbindingsfout, zelfs wanneer het IP-adres goed is geconfigureerd.
Instellen ➠ Het MAC-adres wordt weergegeven. Het MAC-adres en informatie weergeven voor Draadloos LAN 1 Selecteer
Instellen KOPPELINGEN Verbinding maken met een draadloos LAN(P. 27) IPv4-adres instellen(P. 41) IPv6-adressen instellen(P. 44) DNS configureren(P.
Instellen Configuratie-instellingen voor communicatie met een computer 258A-011 Specificeer het protocol en de poort als u het apparaat via het netwerk vanaf een computer gebruikt. Ga het apparaat pas configureren voor afdrukken vanaf een computer nadat u de basisinstelprocedures hebt uitgevoerd. Voor meer informatie raadpleegt u de handleidingen voor de relevante stuurprogramma´s op de website voor de handleidingen. Afdrukprotocollen en WSD-functies configureren(P. 51) Printerpoorten configureren(P.
Instellen Afdrukprotocollen en WSD-functies configureren 258A-012 Configureer de protocollen die worden gebruikt voor het afdrukken van documenten vanaf een netwerkcomputer. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) . 1 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P.
Instellen 3 Klik op [OK]. WSD configureren 1 Selecteer [WSD-instellingen] 2 Configureer de instellingen. [Bewerken]. [Gebruik WSD-afdrukken] Schakel dit selectievakje in om af te drukken via WSD. Als u niet afdrukt via WSD, schakelt u het selectievakje uit. [Gebruik WSD-bladeren] Schakel dit selectievakje in om via WSD informatie over het apparaat op te halen van een computer. Dit selectievakje wordt automatisch ingeschakeld wanneer u het selectievakje [Gebruik WSD-afdrukken] inschakelt.
Instellen Het poortnummer veranderen ● Hetzelfde poortnummer dat is gebruikt voor het apparaat en een computer moet worden gebruikt voor het afdrukprotocol. Printerpoorten configureren(P. 54) Poortnummers wijzigen(P. 244) KOPPELINGEN Printerpoorten configureren(P.
Instellen Printerpoorten configureren 258A-013 Er kunnen afdrukfouten optreden wanneer het IP-adres van de machine is gewijzigd of wanneer er een printer is toegevoegd via de printermap van Windows. Deze fouten zijn meestal het gevolg van onjuiste printerpoortinstellingen. Zo kan er een onjuist poortnummer of type poort zijn opgegeven. In dergelijke situaties mislukt het afdrukken omdat de documentgegevens niet aankomen op de machine.
Instellen ● Als het volgende scherm verschijnt, volg dan de aanwijzingen op het scherm. * Als u het [Apparaattype] selecteert, selecteer dan [Canon Network Printing Device with P9100] onder [Standaard]. 5 Klik op [Voltooien]. 6 Klik op [Sluiten]. Het type poort of het poortnummer wijzigen Als het afdrukprotocol (LPD of RAW) aan de apparaatzijde is veranderd ( Afdrukprotocollen en WSDfuncties configureren(P. 51) ) of het poortnummer is veranderd ( Poortnummers wijzigen(P.
Instellen KOPPELINGEN Een printserver instellen(P.
Instellen Een printserver instellen 258A-014 Het installeren van een printserver (afdrukserver) betekent dat u de computer kunt ontlasten die u gebruikt om af te drukken. Ook kunt u met behulp van de printserver de stuurprogramma's op iedere computer installeren via het netwerk, zodat u niet zo veel werk hebt om de stuurprogramma´s per computer te installeren met behulp van de meegeleverde DVD-ROM.
Instellen ● Deze bewerking is noodzakelijk als u de stuurprogramma's via de printserver wilt installeren op computers met een andere bitarchitectuur. 1 Klik op [Extra stuurprogramma's]. 2 Schakel het selectievakje in van de bitarchitectuur van andere computers en klik op [OK]. ● Selecteer extra stuurprogramma's uit de volgende opties in overeenstemming met het besturingssysteem van de afdrukserver.
Instellen 2 Dubbelklik op de gedeelde printer. 3 Volg de instructies op het scherm om de stuurprogramma's te installeren. KOPPELINGEN Afdrukken vanaf een computer(P.
Instellen De machine configureren voor uw netwerkomgeving 258A-015 De configuratie van een netwerk varieert naargelang de functie van het netwerk. Het apparaat is ontworpen voor compatibiliteit met zo veel mogelijk netwerkconfiguraties en ondersteunt om die reden verschillende technologieën. Overleg met de netwerkbeheerder en kies voor een configuratie die aansluit bij uw netwerkomgeving. Ethernet-instellingen configureren(P. 61) De maximale verzendeenheid wijzigen(P.
Instellen Ethernet-instellingen configureren 258A-016 Ethernet is een standaard voor het uitwisselen van gegevens in een lokaal netwerk (LAN). U kunt de communicatiemodus en het type Ethernet instellen. Over het algemeen is het zo dat u het apparaat kunt gebruiken zonder dat u de standaardinstellingen hoeft te wijzigen ( (P. 325) ), maar u kunt de instellingen wijzigen om deze beter af te stemmen op uw netwerkomgeving. 1 Selecteer
Instellen In deze modus worden er afwisselend gegevens verzonden en ontvangen. Selecteer deze modus als het apparaat is aangesloten op een netwerkapparaat dat half duplex gebruikt. In deze modus worden gegevens tegelijkertijd verzonden en ontvangen. Deze instelling kunt u voor de meeste omgevingen gebruiken. 3 4 Selecteer . 5 selecteer het type Ethernet. Start de machine opnieuw op.
Instellen De maximale verzendeenheid wijzigen 258A-017 In de meeste Ethernet-netwerken is 1500 bytes de maximale grootte van een gegevenspakket dat kan worden verzonden. Een pakket is het blok met gegevens waarin de oorspronkelijke gegevens worden opgedeeld voordat ze worden verzonden. De maximale verzendeenheid (MTU) kan per netwerk verschillen. Wijzig de instellingen van het apparaat indien nodig. Neem voor meer informatie contact op met de netwerkbeheerder. 1 Selecteer
Instellen Een wachttijd instellen voor verbinding met een netwerk 258A-018 Als in een netwerk redundante connectiviteit wordt aangeboden door de aanwezigheid van verschillende switching hubs of bridges, moet er een mechanisme zijn om te voorkomen dat pakketten in een oneindige lus terechtkomen. Een efficiënte oplossing is dus om voor elke switch-poort een bepaalde rol te definiëren.
Instellen DNS configureren 258A-019 DNS (Domain Name System) is een service voor naamomzetting waarmee de naam van een host (of domein) wordt gekoppeld aan een IP-adres. Configureer de benodigde instellingen voor DNS, mDNS of DHCP. De procedures voor het configureren van DNS zijn verschillend voor IPv4 en IPv6. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) .
Instellen [Instellingen DHCP-opties] [Hostnaam verkrijgen] Schakel dit selectievakje in om Optie 12 in te schakelen en de hostnaam te verkrijgen van de DHCPserver. [DNS dynamische update] Schakel dit selectievakje in om Optie 81 in te schakelen en de DNS-records dynamisch bij te werken via de DHCP-server. [DNS-serveradres verkrijgen] Schakel dit selectievakje in als u Optie 6 wilt inschakelen en een DNS-server wilt ophalen van de DHCP-server.
Instellen Schakel dit selectievakje in als u de DNS-records dynamisch wilt bijwerken wanneer het IP-adres van het apparaat verandert. Wanneer u een interval wilt instellen tussen updates, voert u de tijd in uren in het vak [DNS dynamisch update-interval] in. [mDNS-instellingen] [Gebruik mDNS] mDNS (multicast DNS) wordt ondersteund door Bonjour en is een protocol voor het koppelen van een hostnaam aan een IP-adres zonder DNS te gebruiken.
Instellen [Gebruik dezelfde hostnaam/domeinnaam als IPv4] Schakel het selectievakje in als u de host- en domeinnamen van IPv4 wilt gebruiken. [Hostnaam] Typ hier alfanumerieke tekens voor de hostnaam van het apparaat dat u wilt registreren op de DNS-server. [Domeinnaam] Typ hier alfanumerieke tekens voor de naam van het domein waarvan de machine deel uitmaakt, zoals 'voorbeeld.com'.
Instellen SMB configureren 258A-01A SMB (Server Message Block) is een protocol voor het delen van bronnen, zoals bestanden en printers, bij meerdere apparaten in een netwerk. U hebt het nodig op het apparaat als een gedeelde printer op een SMB netwerk te configureren. Afhankelijk van het netwerk, moet u de NetBIOS-naam en een werkgroepnaam instellen.
Instellen [NetBIOS-naam] Gebruik alfanumerieke tekens voor de NetBIOS-naam van het apparaat. [Werkgroepnaam] Gebruik alfanumerieke tekens voor de naam van de werkgroep waarvan het apparaat deel uitmaakt. ● NetBIOS-namen of werkgroepnamen die beginnen met een sterretje (*) kunnen niet worden geregistreerd op een WINS-server. 6 Klik op [OK]. 7 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. KOPPELINGEN WINS configureren(P.
Instellen WINS configureren 258A-01C WINS (Windows Internet Name Service) is een service voor naamomzetting waarmee een NetBIOS-naam (de naam van een computer of printer in een SMB-netwerk) wordt gekoppeld aan een IP-adres. U moet de WINS-server opgeven om WINS in te schakelen. ● Als u instellingen voor de WINS-server wilt opgeven, moeten de NetBIOS-naam en de werkgroepnaam zijn ingesteld. SMB configureren(P. 69) ● Deze functie is niet beschikbaar in een IPv6-netwerk.
Instellen Voer het IP-adres van de WINS-server in. ● Als het IP-adres van de WINS-server wordt verkregen van een DHCP-server, heeft het verkregen IP-adres prioriteit boven het IP-adres dat is ingevoerd in het vak [WINS-serveradres]. 6 Klik op [OK]. 7 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Instellingen selecteren vanaf het bedieningspaneel ● De WINS-instellingen zijn ook bereikbaar via
Instellen De machine bewaken en bedienen met SNMP 258A-01E SNMP (Simple Network Management Protocol) is een protocol voor het bewaken en aansturen van communicatieapparaten in een netwerk dat werkt met MIB (Management Information Base). De machine ondersteunt SNMPv1, en SNMPv3 met extra beveiliging. U kunt de status van de machine controleren vanaf een computer wanneer u documenten afdrukt of de UI op afstand gebruikt. U kunt SNMPv1 of SNMPv3 inschakelen, of beide versies tegelijk.
Instellen 4 Klik op [Bewerken]. 5 Geef instellingen voor SNMPv1 op. ● Als u de SNMPv1-instellingen niet hoeft te wijzigen, gaat u verder met de volgende stap. [Gebruik SNMPv1] Schakel dit selectievakje in om SNMPv1 in te schakelen. De overige instellingen voor SNMPv1 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruik community-naam 1]/[Gebruik community-naam 2] Schakel het selectievakje in om een Community-naam op te geven.
Instellen [Gebruik SNMPv3] Schakel dit selectievakje in om SNMPv3 in te schakelen. De overige instellingen voor SNMPv3 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruiker inschakelen] Schakel dit selectievakje in om [Gebruikersinstellingen 1]/[Gebruikersinstellingen 2]/[Gebruikersinstellingen 3] in te schakelen. Schakel een selectievakje uit om de desbetreffende gebruikersinstellingen uit te schakelen. [Gebruikersnaam] Gebruik alfanumerieke tekens voor de gebruikersnaam.
Instellen 7 Geef instellingen op voor het verkrijgen van informatie voor het beheren van printers. ● Met SNMP kunt u gegevens voor het beheren van printers, zoals afdrukprotocollen en printerpoorten, controleren en periodiek opvragen bij een computer in het netwerk. [Printerbeheerinformatie verkrijgen van host] Schakel het selectievakje in om via SNMP de gegevens voor printerbeheer van het apparaat te bewaken. Als u geen printerbeheerinformatie wilt bewaken, schakelt u het selectievakje uit.
Instellen Andere netwerkinstellingen 258A-01F Configureer de volgende items, al naargelang uw netwerkomgeving. SNTP configureren(P. 77) Het apparaat beheren vanuit de Apparaatbeheersystemen(P. 78) SNTP configureren Met SNTP (Simple Network Time Protocol) kunt u de systeemklok synchroniseren met de tijdserver in het netwerk. Als u SNTP gebruikt, controleert het systeem de tijdserver in gespecificeerde intervallen, zodat de correcte tijd altijd wordt gehandhaafd.
Instellen Schakel het selectievakje in als u SNTP wilt gebruiken voor synchronisatie. Als u SNTP niet wilt gebruiken, schakelt u het selectievakje uit. [NTP-servernaam] Voer het IP-adres van de NTP of de SNTP-server in. Als DNS beschikbaar is in het netwerk, kunt u een hostnaam (of FQDN) invoeren die bestaat uit alfanumerieke tekens. (Voorbeeld: ntp.example.com). [Pollinginterval] Geef het interval op tussen opeenvolgende synchronisaties. 6 Klik op [OK]. 7 Start de machine opnieuw op.
Instellen Bewerkingen via de Externe UI ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) . ◼ SLP-communicatie met software voor apparaatbeheer configureren 1 Start de externe UI en meld u in de systeembeheerdersmodus aan. afstand starten(P. 276) 2 Klik op [Instellingen/registratie] op de portaalpagina. UI(P. 277) 3 Klik op [Netwerkinstellingen].
Instellen Software voor toestelbeheer informeren over de status van de stroomvoorziening van het apparaat 1 Selecteer [Meldingsinstellingen sluimermodus] 2 Schakel het selectievakje [Melden] in en geef de benodigde instellingen op. [Bewerken]. [Melden] Schakel het selectievakje in als u Software voor apparaatbeheer wilt informeren over de status van de stroomvoorziening van het apparaat.
Instellen Stuurprogramma´s installeren 258A-01H Installeer de verschillende stuurprogramma's en bijbehorende software op uw computer. 1 Realiseer de vereiste voorbereiding voordat u verder gaat met de installatie. ● Installeer vooraf de optionele apparaten op de hoofdeenheid. Als optie verkrijgbare apparatuur(P. 543) ● Als het apparaat een DVD-ROM heeft, plaatst u de DVD-ROM in het station op de computer.
Basishandelingen Basishandelingen Basishandelingen ............................................................................................................................................. 84 Onderdelen en de bijbehorende functies .......................................................................................................... 87 Voorzijde ........................................................................................................................................................
Basishandelingen Instelgeluiden ................................................................................................................................................... 161 De slaapstand instellen .....................................................................................................................................
Basishandelingen Basishandelingen 258A-01J In dit hoofdstuk worden de basishandelingen beschreven, zoals het gebruiken van het bedieningspaneel of het plaatsen van het papier. Het gaat hier om handelingen die vaak worden uitgevoerd om de functies van het apparaat te gebruiken. ◼ Onderdelen en de bijbehorende functies In dit gedeelte wordt aandacht besteed aan de externe en interne onderdelen van het apparaat en hun functie.
Basishandelingen ◼ Papier laden Dit gedeelte beschrijft hoe u het papier in de papierlade en de multifunctionele lade plaatst. Papier laden(P. 124) ◼ Het display aanpassen Dit gedeelte beschrijft hoe u items opnieuw indeelt om het in het display weergegeven schermen makkelijker te kunnen gebruiken. Het display aanpassen(P.
Basishandelingen ◼ De slaapstand instellen In dit gedeelte wordt beschreven hoe u de slaapstand instelt. 86 De slaapstand instellen(P.
Basishandelingen Onderdelen en de bijbehorende functies 258A-01K In dit gedeelte worden de onderdelen van het apparaat beschreven (buitenzijde, voorzijde, achterzijde en binnenzijde), evenals de functie die ze hebben. Naast de onderdelen van het apparaat die nodig zijn voor het uitvoeren van basishandelingen zoals het laden van papier en het vervangen van tonercartridges, wordt hier ook aandacht besteed aan de toetsen op het bedieningspaneel en het display.
Basishandelingen Voorzijde 258A-01L Uitvoerlade Afdrukken worden uitgevoerd via de uitvoerlade. USB-poort (voor aansluiting van USB-toestellen) U kunt op deze poort een door derden geproduceerd USB-geheugenapparaat of USB-toetsenbord aansluiten. Wanneer u een USB-geheugenapparaat aansluit, kunt u gegevens uit het geheugenapparaat afdrukken. Een USB-geheugenapparaat plaatsen(P. 90) Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia)(P.
Basishandelingen Papierlade Gebruik de papierlade voor het laden van de papiersoort die u het meest gebruikt. papierlade plaatsen(P. 126) Papier in de Multifunctionele lade / sleuf voor handmatige invoer Plaats het papier in de multifunctionele lade wanneer u tijdelijk een andere papiersoort wilt gebruiken dan het papier dat in de papierlade is geplaatst. Papier in de multifunctionele lade plaatsen(P.
Basishandelingen Een USB-geheugenapparaat plaatsen 258A-01R Steek een USB-geheugen in de USB-poort aan de voorzijde van het apparaat. U kunt data rechtstreeks vanuit een USBgeheugen afdrukken. Voordat u een USB-geheugen gebruikt ● De ondersteunde formaten van USB-geheugenapparaat zijn FAT16 en FAT32. ● U moet instellen op . (P. 415) De volgende apparaten en gebruiken worden niet ondersteund.
Basishandelingen ● Gebruik altijd de volgende procedure bij het verwijderen van USB-geheugenapparaten. Het gebruik van andere methoden om USB-geheugenapparaten te verwijderen, kan leiden tot schade aan het toestel en het apparaat. Model aanraakscherm 1 Selecteer . 2 Selecteer . ➠ Wacht totdat de melding wordt weergegeven. 3 Verwijder het USB-geheugenapparaat.
Basishandelingen Achterzijde 258A-01S Klep aan de achterzijde Open deze klep als u papierstoringen gaat verhelpen. Papierstoringen verhelpen(P. 506) Etiket stroomverbruik Dit etiket vermeldt onder andere het serienummer. Dit nummer hebt u nodig als u vragen of problemen hebt. Als een probleem niet kan worden opgelost(P. 516) Netstroomaansluiting Hier sluit u het netsnoer aan.
Basishandelingen Binnenzijde 258A-01U Lade met tonercartridges Hier installeert u de tonercartridges. Plaats de gele (Y), magenta (M), cyaan (C) en zwarte (K) tonercartridges in de sleuven in de lade, waarbij u achteraan begint. Procedure voor het vervangen van de tonercartridge(P. 437) KOPPELINGEN De tonercassette vervangen(P.
Basishandelingen Multifunctionele lade 258A-01W LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Papiergeleiders Stel de papiergeleiders exact af op de breedte van het geladen papier, zodat het papier mooi recht in de machine wordt gevoerd. Voor LBP654Cx / LBP653Cdw ● Druk op de ontgrendelingspal die in de afbeelding met pijlen wordt aangegeven, om de geleiders te ontgrendelen, zodat u deze kunt verschuiven. Papierlade Trek de papierlade uit als u papier gaat plaatsen.
Basishandelingen Papierlade 258A-01X LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Papiergeleiders Stel de papiergeleiders exact af op de grootte van het geladen papier, zodat het papier mooi recht in het apparaat wordt gevoerd. Druk op de ontgrendelingspallen die in de afbeeldingen met pijlen worden aangegeven om de geleiders te ontgrendelen, zodat u deze kunt verschuiven.
Basishandelingen Legal papier plaatsen ● Als u de papierlade naar binnen steekt met het extra deel uitgeschoven, ligt de voorkant van de papierlade niet vlak de voorkant van het apparaat. KOPPELINGEN Papier in de papierlade plaatsen(P.
Basishandelingen Bedieningspaneel 258A-01Y Bedieningspaneel van Model aanraakscherm(P. 97) Bedieningspaneel van Model zwart-wit LCD(P. 98) Bedieningspaneel van Model aanraakscherm ● De hoek van het bedieningspaneel kan worden ingesteld. Kies een hoek waaronder u het paneel het beste kunt bekijken. De hoek instellen(P. 98) Display Hierop wordt de voortgang van het apparaat en foutstatussen weergegeven. De display is een aanraakscherm, zodat u instellingen kunt opgeven door het scherm direct aan te raken.
Basishandelingen Fouten-lampje Dit lampje knippert of brandt als er sprake is van een fout, zoals een papierstoring. Toets Start Druk hierop zodat het scherm Start wordt weergegeven, dat toegang geeft tot het instellingenmenu en functies, zoals Geheugenmedia afdrukken en Beveiligde afdruk. Het scherm Start(P. 107) Het scherm Start aanpassen(P. 158) Toets Stop Druk op deze toets om het afdrukken en andere bewerkingen te annuleren.
Basishandelingen Toets Start Druk hierop zodat het scherm Start wordt weergegeven, dat toegang geeft tot het instellingenmenu en functies, zoals Geheugenmedia afdrukken en Beveiligde afdruk. Het scherm Start(P. 107) Toets Terug Druk op deze toets om terug te keren naar het vorige scherm. Als u deze toets bijvoorbeeld indrukt tijdens het opgeven van instellingen, worden de instellingen niet opgeslagen en keert u terug naar het vorige scherm.
Basishandelingen [ ]-toets Druk tijdens het opgeven van instellingen op deze toets om terug te keren naar het vorige scherm. Druk tijdens het invoeren van getallen op deze toets om de cursor naar links te verplaatsen. [ ]-toets Druk tijdens het opgeven van instellingen op deze toets om het item boven het geselecteerde item te kiezen. Tijdens het wijzigen van instellingen kunt u met deze toets de waarde verhogen.
Basishandelingen Het apparaat AAN zetten 258A-020 Dit gedeelte beschrijft hoe u het apparaat AAN zet. 1 Controleer of de stekker goed in het stopcontact zit. 2 Druk op de hoofdschakelaar. ➠ Het Start-scherm verschijnt. Bedieningspaneel(P. 97) ● U kunt kiezen welk scherm verschijnt nadat het apparaat AAN is gezet. herstel>(P. 298) KOPPELINGEN Het apparaat UIT zetten(P.
Basishandelingen Het apparaat UIT zetten 258A-021 Dit gedeelte beschrijft hoe u het apparaat UIT zet. 1 Druk op de hoofdschakelaar. ● Het kan een tijdje duren voordat het apparaat geheel is uitgeschakeld. Wacht tot het display is gedoofd en trek dan pas de stekker eruit. ● Om het apparaat opnieuw te starten, wacht u minimaal 10 seconden nadat het is uitgezet. ● U kunt voor iedere dag van de week de tijd opgeven, en een instelling configureren om het apparaat automatisch UIT te zetten.
Basishandelingen Op een vaste tijd UITschakelen 258A-022 U kunt een instelling realiseren dat het apparaat iedere dag van de week op een bepaalde tijd automatisch UIT gaat. Hiermee kunt u nutteloos stroomverbruik vermijden dat kan optreden als u nalaat het apparaat UIT te schakelen. Standaard is deze functie niet actief. ● Voor meer informatie over de basishandelingen om het apparaat in te stellen via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) .
Basishandelingen [Zondag] tot [Zaterdag] Voer de tijd in waarop het apparaat UIT moet gaan. Als u op een bepaalde weekdag het vakje leeg laat, is de functie voor die dag niet actief. 5 Klik op [OK].
Basishandelingen Het bedieningspaneel gebruiken 258A-023 U kunt het display en de toetsen van het bedieningspaneel gebruiken om apparaatinstellingen te configureren of functies te activeren. Dit gedeelte beschrijft het basisgebruik van het display en de toetsen. Basisschermen(P. 106) Basishandeling(P. 114) Tekst invoeren(P.
Basishandelingen Basisschermen 258A-024 Het scherm Start of het instellingenscherm wordt op het display weergegeven, zodat u kunt beginnen met functies zoals Geheugenmediaafdrukken of Beveiligde afdruk. Met de display kunt u ook informatie controleren, zoals foutmeldingen en de bedieningsstatus van het apparaat. Om het Model aanraakscherm te bedienen, raakt u het gewoon aan. Het scherm Start(P. 107) Het scherm (P. 110) Berichtenvenster(P.
Basishandelingen Het scherm Start 258A-025 Het scherm Start wordt weergegeven wanneer u het apparaat inschakelt door op het bedieningspaneel op drukken. Via dit scherm kunt u instellingen opgeven en functies registreren. te Het scherm Start van Model aanraakscherm(P. 107) Het scherm Start van Model zwart-wit LCD(P. 109) Het scherm Start van Model aanraakscherm Een andere pagina kiezen Kies hiermee een andere pagina in het Home-scherm. U kunt ook zijdelings strijken om van pagina te wisselen.
Basishandelingen Druk bestanden af die op een USB-geheugenapparaat zijn opgeslagen. Afdrukken vanaf een USBgeheugenapparaat (afdrukken via geheugenmedia) (P. 178) Met behulp van deze functie drukt u een beveiligd document af. Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P. 174)
Basishandelingen Het scherm Start van Model zwart-wit LCD Wi-Fi pictogram Verschijnt als het apparaat is verbonden met een draadloos LAN. Resterende hoeveelheid toner in de cartridges Hiermee wordt de resterende hoeveelheid toner in cartridges in stappen aangegeven. Dit is verborgen als het Home-scherm actief is.
Basishandelingen Het scherm 258A-026 ) drukt, wordt er een scherm weergegeven waarin u de voortgang kunt Wanneer u op ( controleren van documenten, en ook de status van het apparaat (resterende hoeveelheid toner in de tonercartridge, enzovoort) en netwerkinstellingen, zoals het IP-adres van het apparaat. Het scherm van Model aanraakscherm(P. 110) Het scherm van Model zwart-wit LCD(P.
Basishandelingen Geeft het serienummer van het apparaat weer. Status en logboeken van afgedrukte en ontvangen documenten Hiermee geeft u de huidige status van het geselecteerde item weer. Hieronder ziet u het scherm als voorbeeld. Geeft de netwerkinstellingen zoals het IP-adres van het apparaat weer en de status zoals de staat van de draadloze LAN-communicatie. Netwerkinstellingen weergeven(P. 47)
Basishandelingen Druk hierop om informatie weer te geven over de verschillende papierbronnen. Hiermee wordt de resterende hoeveelheid toner in de tonercartridges aangegeven. Andere interne onderdelen kunnen opraken of versleten raken voordat de toner opraakt. Hiermee kunt u een USB-geheugenapparaat veilig verwijderen. Dit wordt uitsluitend weergegeven als een USB-geheugenapparaat op het apparaat is aangesloten.
Basishandelingen Berichtenvenster 258A-027 Berichten worden op het scherm weergegeven, bijvoorbeeld als het papier op is of de tonercartridges opraken. Maatregelen bij ieder bericht(P. 486) Model aanraakscherm Model zwart-wit LCD Als er een fout optreedt In sommige gevallen worden, wanneer er een fout optreedt, instructies weergegeven over hoe u moet reageren. Volg de aanwijzingen op het scherm voor het oplossen van het probleem.
Basishandelingen Basishandeling 258A-028 Basishandeling van Model aanraakscherm(P. 114) Basishandelingen van Model zwart-wit LCD(P. 116) Basishandeling van Model aanraakscherm Het display is een aanraakscherm: u bedient het door het aan te raken. Vermijd de volgende handelingen. ● Hierdoor kunnen zich storingen voordoen of kan het display beschadigd raken.
Basishandelingen ◼ Items selecteren Tik op een itemnaam of knop om een selectie te maken. Als u een item per ongeluk aanraakt ● Schuif uw vinger weg en laat los om de selectie te annuleren. Teruggaan naar het vorige scherm ● Tik op om terug te gaan naar het vorige scherm. ◼ Door het scherm bladeren De schuifbalk verschijnt op het scherm wanneer er nog informatie is die niet wordt weergegeven. Wordt de bladerbalk weergegeven, dan kunt u bladeren door in de gewenste richting te vegen. NB.
Basishandelingen ◼ De instellwaarde wijzigen Tik op <+> / <-> en u kunt de instelling van de schaal aanpassen. U kunt ook een instelling aanpassen door de schuifbalk naar links of naar rechts te vegen. ● U kunt verschillende instellingen wijzigen voor het display, zoals de weergavetaal: instellingen>(P. 298) (P.
Basishandelingen De waarde van instellingen wijzigen / om waarden in te voeren. Als een pictogram zoals hieronder in de linkerbovenhoek van het Gebruik scherm wordt weergegeven, kunt u waarden rechtstreeks met de numerieke toetsen invoeren. Tekst invoeren(P. 119) ● Tussen haakjes ( ) weergegeven waarden onder het invoervak duiden het waardebereik aan. De toetsen / Volgende of vorige scherm weergeven Druk op om naar het volgende scherm te gaan.
Basishandelingen ● U kunt verschillende instellingen wijzigen voor het display, zoals de weergavetaal: instellingen>(P. 298) (P. 306) ● U kunt verschillende instellingen wijzigen voor de toegang, zoals de bladersnelheid: (P.
Basishandelingen Tekst invoeren 258A-029 Tekst invoeren op het Model aanraakscherm(P. 119) Tekst invoeren op het Model zwart-wit LCD(P. 120) Tekens invoeren met een USB-toetsenbord(P. 122) Tekst invoeren op het Model aanraakscherm Als u tekst of een getal invoert, gebruik dan het scherm-toetsenbord. De numerieke toetsen worden op het scherm weergegeven om uitsluitend cijfers in te voeren. Een ander type teken kiezen Tik op of <1/#> om tijdens het invoeren om te schakelen naar een ander tekentype.
Basishandelingen Waardebereik ● De tussen haakjes ( ) weergegeven waarden onder het invoervak duiden het waardebereik aan. Als andere knoppen dan de numerieke toetsen worden weergegeven ● Als <+> / <-> of / worden weergegeven, kunt u met behulp van de knoppen de numerieke waarde verhogen of verlagen, of de cursor verplaatsen. Tekst invoeren op het Model zwart-wit LCD Voer met de numerieke toetsen tekst en waarden in.
Basishandelingen Typen tekst die u kunt invoeren Hieronder wordt vermeld welke tekst u kunt invoeren. Toets A a 12 @.-_/ 1 ABC abc 2 DEF def 3 GHI ghi 4 JKL jkl 5 MNO mno 6 PQRS pqrs 7 TUV tuv 8 WXYZ wxyz 9 (niet beschikbaar) 0 (spatie) -.*#!",;:^`_=/|'?$@%&+\~()[]{}<> (niet beschikbaar) ● Druk op of selecteer en druk op als het type ingevoerde tekst of is, om symbolen op het scherm weer te geven die u kunt invoeren.
Basishandelingen 7 Druk herhaaldelijk op totdat de letter "n" is geselecteerd. 8 Druk herhaaldelijk op totdat het symbool "-" is geselecteerd. 9 Druk herhaaldelijk op totdat <12> is geselecteerd. 10 Druk op 11 Selecteer en druk op . . Tekens invoeren met een USB-toetsenbord U kunt een toetsenbord op de USB-poort voor USB-apparaten op de Voorzijde(P. 88) of Achterzijde(P. 92) aansluiten, en tekst met het toetsenbord invoeren.
Basishandelingen Aanmelden bij het apparaat 258A-02A Als Afdelings-ID-beheer is ingeschakeld of als Systeembeheerders-ID's zijn geactiveerd, kunt u het apparaat pas gebruiken wanneer u hebt ingelogd. Wanneer het aanmeldingsscherm wordt weergegeven, volg dan onderstaande procedure en voer de Afdelings-ID en pincode in. 1 Voer het ID in. 1 Selecteer of . 2 Voer het ID in. ● Als er geen pincode is geregistreerd, gaat u verder met stap 3. 2 Voer de pincode in.
Basishandelingen Papier laden 258A-02C U kunt papier in de papierlade of de multifunctionele lade plaatsen. Gebruik de papierlade voor het laden van de papiersoort die u meestal gebruikt. De papierlade is handig wanneer u grote hoeveelheden papier gebruikt. Gebruik de multifunctionele invoer wanneer u tijdelijk een formaat of type papier wilt gebruiken dat niet in de papierlade is geplaatst. Raadpleeg Geschikt papier(P. 531) voor beschikbare papiersoorten en -formaten. Papier Richtlijnen voor papier(P.
Basishandelingen Behandeling en opslag van papier ● U wordt geadviseerd het papier na het uitpakken zo snel mogelijk te gebruiken. Papier dat nog niet wordt gebruikt, moet weer in de originele verpakking worden gedaan en op een platte ondergrond worden bewaard. ● Bewaar het papier in de originele verpakking om het te beschermen tegen vocht of droogte. ● Bewaar het papier niet op een manier waardoor het kan krullen of vouwen. ● Bewaar het papier niet verticaal en plaatst niet te veel papier op elkaar.
Basishandelingen Papier in de papierlade plaatsen 258A-02E Laad het papier dat u normaliter in de papierlade gebruikt. Als u wilt afdrukken op papier dat niet in de papierlade is geplaatst, laad het dan in de multifunctionele lade. Papier in de multifunctionele lade plaatsen(P. 133) Papier van gangbaar formaat plaatsen(P. 126) Papier van aangepast formaat plaatsen(P. 129) ● Voor A5-formaat papier, raadpleegt u Papier van aangepast formaat plaatsen(P. 129) en laadt u het in liggende afdrukrichting.
Basishandelingen 2 Verstel de positie van de papiergeleiders zo dat ze overeenkomen met het papierformaat dat u wilt gebruiken. LBP654Cx / LBP653Cdw ● Terwijl u de ontgrendelingspal ingedrukt houdt, beweegt u de papiergeleider om de opstaande rand gelijk te stellen met de markering voor het gewenste papierformaat. LBP613Cdw / LBP611Cn 1 Schuif de papiergeleider naar de zijkant, en lijn de opstaande rand uit met de markering voor het gewenste papierformaat.
Basishandelingen Legal papier plaatsen ● Druk op de ontgrendelingspal en schuif de papierlade uit. 3 Plaats het papier zo dat de rand van de papierstapel de papiergeleider aan de voorzijde van de papierlade raakt. ● Plaats het papier met de afdrukzijde naar boven. ● Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen.
Basishandelingen ● Wanneer wordt afgedrukt op papier met een logo, raadpleeg dan plaatsen(P. 141) . 4 Voorbedrukt papier Schuif de papierlade in de machine. ● Als u de papierlade plaatst met ingesteld op , verschijnt een bevestigingsscherm. (P. 421) Legal papier plaatsen ● Als u de papierlade naar binnen steekt met het extra deel uitgeschoven, ligt de voorkant van de papierlade niet vlak de voorkant van het apparaat.
Basishandelingen 1 Trek de papierlade uit. LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn ● Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Schuif de papiergeleiders naar de zijkanten van de papierlade. ● Druk op de ontgrendelingspal om de papiergeleiders naar de zijkanten van de papierlade te schuiven.
Basishandelingen ● Plaats het papier met de afdrukzijde naar boven. ● Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen. Stapel het papier niet hoger dan de markering voor het maximale aantal vellen ● Zorg ervoor dat de stapel papier niet hoger is dan de markering voor het maximale aantal vellen ( ). Als u te veel papier plaatst, kan dit papierstoringen veroorzaken. ● Zie 4 Voorbedrukt papier plaatsen(P.
Basishandelingen ● Als u de papierlade plaatst met ingesteld op , verschijnt een bevestigingsscherm. (P. 421) Wanneer u papier plaatst dat langer is dan het A4-formaat ● Als u de papierlade naar binnen steekt met het extra deel uitgeschoven, ligt de voorkant van de papierlade niet vlak de voorkant van het apparaat. » Ga verder met Het type en formaat papier opgeven dat in de papierlade is geplaatst(P.
Basishandelingen Papier in de multifunctionele lade plaatsen 258A-02F Als u wilt afdrukken op papier dat niet in de papierlade is geplaatst, laad het dan in de multifunctionele lade. Laad het papier dat u normaliter in de papierlade gebruikt. Papier in de papierlade plaatsen(P. 126) Voor de LBP654Cx / LBP653Cdw(P. 133) Voor de LBP613Cdw / LBP611Cn(P.
Basishandelingen 3 Schuif de papiergeleiders naar de zijkanten van de papierlade. ● Druk op de ontgrendelingspal om de papiergeleiders naar de zijkanten van de papierlade te schuiven. 4 Plaats het papier in de multifunctionele lade tot het papier stopt. ● Plaats het papier met de afdrukzijde naar boven. ● Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen.
Basishandelingen ● Zie Enveloppen plaatsen(P. 138) of Voorbedrukt papier plaatsen(P. 141) als u enveloppen gaat laden of papier met een logo. 5 Schuif de papiergeleiders tegen de randen van het papier. ● Schuif de papiergeleiders naar binnen totdat ze stevig tegen de randen van het papier zitten. Schuif de papiergeleiders stevig tegen de randen van het papier ● Als de papiergeleiders te los of te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan.
Basishandelingen Papier van A5 formaat plaatsen ● Bij het instellen van het papierformaat, moet u goed op de actuele afdrukrichting van het papier letten. Het papierformaat en de papiersoort in de multifunctionele lade opgeven(P. 146) Liggende afdrukrichting 1 Staande afdrukrichting Schuif de papiergeleiders naar de zijkanten van de papierlade. ● Schuif de papiergeleiders naar de zijkanten van de papierlade. 2 Plaats het papier en schuif de papiergeleiders tegen de breedte van het papier.
Basishandelingen ● Om te garanderen dat het papier haaks wordt geladen, moet u het met beide handen vasthouden tot de innamehandeling is voltooid. ● Zie Enveloppen plaatsen(P. 138) of Voorbedrukt papier plaatsen(P. 141) als u enveloppen gaat laden of papier met een logo. » Ga verder met Het papierformaat en de papiersoort in de multifunctionele lade opgeven(P.
Basishandelingen Enveloppen plaatsen 258A-02H Strijk de enveloppen glad voordat u ze gaat laden. Let ook op de invoerrichting van de enveloppen en welke kant naar boven wijst. Voordat u enveloppen gaat laden(P. 138) In de papierlade(P. 139) In de multifunctionele invoer(P. 139) ● In dit gedeelte wordt uitgelegd hoe u enveloppen in de gewenste richting laadt. Daarnaast worden de stappen besproken die u moet uitvoeren voordat u enveloppen gaat laden. Raadpleeg Papier in de papierlade plaatsen(P.
Basishandelingen 4 Maak van de enveloppen een rechte stapel door ze met de zijkanten op een vlakke ondergrond te stoten. In de papierlade Laad enveloppen van het formaat Monarch, COM10, DL of ISO-C5 met de lange kant aan weerszijden en met de kant zonder lijm (de voorzijde) naar boven. U kunt niet afdrukken op de achterzijde van enveloppen. ● Plaats de enveloppen zo dat de rand met de flap aan de linkerkant zit, zoals in de afbeelding.
Basishandelingen 140
Basishandelingen Voorbedrukt papier plaatsen 258A-02J Als u papier gebruikt waarop vooraf een logo is afgedrukt, let u bij het plaatsen op de invoerrichting van het papier. Zorg dat het papier goed is geplaatst zodat er op de juiste kant van het papier met een logo wordt afgedrukt. Enkelzijdig afdrukken op papier met logo's(P. 141) Dubbelzijdig afdrukken op papier met logo's(P.
Basishandelingen Dubbelzijdig afdrukken op papier met logo's Laad het papier met de voorzijde van het bedrukte papier (de zijde voor de eerste pagina van het document) naar beneden. Afdrukken op papier met logo's in de afdrukrichting Staand Afdrukken op papier met logo's in de afdrukrichting Liggend De instelling ● Wanneer u afdrukt op voorbedrukt papier, moet u de afdrukzijde van het geladen papier wijzigen als u enkelzijdig of dubbelzijdig gaat afdrukken.
Basishandelingen Het type en formaat papier opgeven 258A-02K U moet ervoor zorgen dat de instellingen voor het type en formaat papier overeenkomen met het papier dat is geladen. Vergeet dus niet de papierinstellingen aan te passen wanneer u papier gaat laden dat afwijkt van het eerder gebruikte papier. Het type en formaat papier opgeven dat in de papierlade is geplaatst(P. 144) Het papierformaat en de papiersoort in de multifunctionele lade opgeven(P.
Basishandelingen Het type en formaat papier opgeven dat in de papierlade is geplaatst 258A-02L 1 Selecteer in het scherm Start. 2 Selecteer de doel-papierlade. Het scherm Start(P. 107) () wordt uitsluitend weergegeven als de optionele cassette feeding module is geïnstalleerd. ● Model aanraakscherm 3 Model zwart-wit LCD Selecteer het papierformaat. ● Als het formaat van het geplaatste papier niet zichtbaar is, selecteert u .
Basishandelingen 3 Selecteer . Papier van A5 formaat plaatsen ● In de liggende afdrukstand, selecteert u . In de staande afdrukstand, selecteert u . Liggende afdrukrichting Staande afdrukrichting ● Als u het formaat van het te laden papier vaak moet veranderen, selecteert u . Dit vermindert het het aantal stappen dat iedere keer moet worden verricht om de instellingen te veranderen.
Basishandelingen Het papierformaat en de papiersoort in de multifunctionele lade opgeven 258A-02R Het onderstaande scherm wordt weergegeven als er papier is geladen in de multifunctionele lade. Volg de aanwijzingen op het scherm om instellingen op te geven voor het formaat en type papier dat is geladen.
Basishandelingen ● Als u het papierformaat dat u vaak gebruikt, vastlegt onder de knoppen tot , kunt u het met één knopdruk oproepen. Een aangepast papierformaat registreren(P. 152) Model zwart-wit LCD ● Verricht de volgende reeks stappen: voer de papierbreedte in voer de papierlengte in 3 Selecteer . Papier van A5 formaat plaatsen ● In de liggende afdrukstand, selecteert u . In de staande afdrukstand, selecteert u .
Basishandelingen ● Als het papiertype [Auto] is ingesteld in het printerstuurprogramma, werkt het apparaat net zo als bij het papiertype [Normaal 1]. KOPPELINGEN Papier in de multifunctionele lade plaatsen(P. 133) De papierformaten die worden weergegeven, beperken(P. 154) Geschikt papier(P.
Basishandelingen Standaard papierinstellingen voor de multifunctionele lade registreren 258A-02S U kunt standaard-papierinstellingen opslaan voor de multifunctionele lade. Hierdoor hoeft u niet steeds instellingen in te voeren wanneer u altijd hetzelfde papier gebruikt in de multifunctionele lade. ● Als u standaard-papierinstellingen hebt opgegeven, wordt het scherm met papierinstellingen niet meer weergegeven wanneer u papier laadt. U gebruikt dan altijd dezelfde instellingen.
Basishandelingen ● Als u het papierformaat dat u vaak gebruikt, vastlegt onder de knoppen tot , kunt u het met één knopdruk oproepen. Een aangepast papierformaat registreren(P. 152) Model zwart-wit LCD ● Verricht de volgende reeks stappen: voer de papierbreedte in voer de papierlengte in 3 Selecteer . Papier van A5 formaat plaatsen ● In de liggende afdrukstand, selecteert u . In de staande afdrukstand, selecteert u .
Basishandelingen ● Als u het formaat van het te laden papier vaak moet veranderen, selecteert u . Dit vermindert het aantal stappen dat iedere keer moet worden verricht om de instellingen te veranderen. Let op: bij deze instelling zal het apparaat afdrukken, ook als in het printerstuurprogramma een ander type papier is ingesteld dan er daadwerkelijk in het apparaat is geladen.
Basishandelingen Een aangepast papierformaat registreren 258A-02U U kunt maximaal drie aangepaste papierformaten opslaan die u regelmatig gebruikt. 1 Selecteer in het scherm Start. 2 Selecteer . 3 Selecteer het registratienummer. Het scherm Start(P. 107) ● Als u op het Model zwart-wit LCD het geregistreerde nummer hebt geselecteerd, selecteer dan vervolgens . Een instelling verwijderen ● Selecteer 4 .
Basishandelingen ● Als u het formaat van het te laden papier vaak moet veranderen, selecteert u . Dit vermindert het aantal stappen dat iedere keer moet worden verricht om de instellingen te veranderen. Let op: bij deze instelling zal het apparaat afdrukken, ook als in het printerstuurprogramma een ander type papier is ingesteld dan er daadwerkelijk in het apparaat is geladen.
Basishandelingen De papierformaten die worden weergegeven, beperken 258A-02W U kunt ervoor zorgen dat alleen papierformaten die u vaak gebruikt, worden getoond in het scherm voor het selecteren van de instelling van het papierformaat. 1 Selecteer in het scherm Start. 2 Selecteer . 3 Selecteer de papierbron waarvoor u de weer te geven papierformaten wilt 4 Schakel de selectievakjes uit voor papierformaten die u niet wilt weergeven.
Basishandelingen Automatisch een juiste papierbron voor iedere functie selecteren 258A-02X De functie voor het automatisch selecteren van de papierbron voor iedere papierbron in- of uitschakelen. Als deze mogelijkheid is ingesteld op , selecteert het apparaat automatisch voor iedere afdruktaak een papierbron waarin het juiste papierformaat is geladen.
Basishandelingen ● Geef altijd op voor minstens of . Als u voor beide opgeeft, kunt u de instelprocedure niet voltooien. 6 Selecteer .
Basishandelingen Het display aanpassen 258A-02Y Om het scherm Start gebruiksvriendelijker te maken, kunt u het op de gebruiker toesnijden. Het scherm Start aanpassen U kunt de weergegeven items rangschikken naar eigen voorkeur en het scherm aanpassen opdat u gemakkelijker functies selecteert. Het scherm Start aanpassen(P.
Basishandelingen Het scherm Start aanpassen 258A-030 U kunt het itemscherm veranderen om het gemakkelijker te maken het scherm Start te openen, en het scherm Start aan te passen. Knoppen anders rangschikken (Model aanraakscherm)(P. 158) De weergavevolgorde veranderen (Model zwart-wit LCD)(P. 159) Knoppen anders rangschikken (Model aanraakscherm) U kunt het gebruik van de knoppen gemakkelijker maken door de knoppen naar eigen inzicht te rangschikken.
Basishandelingen De weergavevolgorde veranderen (Model zwart-wit LCD) Om de knoppen gebruiksvriendelijker te maken, kunt u de weergavevolgorde van het item vrij veranderen. 1 Selecteer in het scherm Start. 2 Met behulp van / 3 Met behulp van / 4 Als de knoppen naar wens zijn gerangschikt, drukt u op Het scherm Start(P. 107) selecteert u het te verplaatsen item. Druk vervolgens op gaat u naar de doel-positie. Druk nu op KOPPELINGEN Basishandeling(P. 114) 159 . . .
Basishandelingen De standaard instellingen voor functies wijzigen 258A-031 De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft op te geven als u een handeling verricht. ◼ Geheugenmedia afdruk Raadpleeg (P. 406) voor informatie over veranderbare instelitems.
Basishandelingen Instelgeluiden 258A-032 De machine produceert in verschillende situaties geluidssignalen, bijvoorbeeld om aan te geven dat er papier is vastgelopen. U kunt het volume van deze geluiden afzonderlijk instellen. 1 Open het scherm . Model aanraakscherm Druk op ( ). Model zwart-wit LCD Selecteer
Basishandelingen De slaapstand instellen 258A-033 In de slaapstand wordt het stroomverbruik verlaagd door de stroomtoevoer naar het bedieningspaneel te onderbreken. Als er gedurende bepaalde tijd geen bewerkingen worden uitgevoerd op de machine, zoals tijdens de op het bedieningspaneel te drukken. lunchpauze, kunt u energie besparen door op Wanneer de slaapmodus is ingeschakeld ● Het lampje brandt groen als de slaapstand actief is.
Basishandelingen De slaapstandinstelling veranderen voor de opgegeven tijd U kunt instellen dat het apparaat op een opgegeven tijd naar de slaapstand gaat. U kunt ook instellen dat het apparaat de slaapstand op een opgegeven tijd verlaat. Model aanraakscherm
Afdrukken Afdrukken Afdrukken .......................................................................................................................................................... 165 Afdrukken vanaf een computer ....................................................................................................................... 166 Afdrukken annuleren ....................................................................................................................................
Afdrukken Afdrukken 258A-034 Er zijn tal van manieren om het apparaat als printer te gebruiken. U kunt documenten op uw computer afdrukken met behulp van het printerstuurprogramma, of afbeeldingsbestanden afdrukken vanaf een USB-geheugenapparaat. Maak afhankelijk van uw wensen volledig gebruik van de afdrukfuncties. ◼ Afdrukken vanaf een computer Een document dat u op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Afdrukken vanaf een computer(P.
Afdrukken Afdrukken vanaf een computer 258A-035 Documenten die u met een programma op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Het printerstuurprogramma heeft een aantal handige instellingen, zoals vergroten / verkleinen en dubbelzijdig afdrukken, waarmee u uw documenten op verschillende manieren kunt afdrukken. U kunt de afdrukfunctie van de machine pas gebruiken nadat u enkele procedures hebt doorlopen, zoals het installeren van het printerstuurprogramma op uw computer.
Afdrukken ● Normaal gesproken moet u, voordat u gaat afdrukken, het formaat en het type papier opgeven dat is geladen in iedere papierbron. 1 Open een document in een programma en geef het dialoogvenster Afdrukken weer. 2 Selecteer het printerstuurprogramma voor dit apparaat en klik op 3 Geef de afdrukinstellingen op en klik op [OK]. [Voorkeursinstellingen] of [Eigenschappen]. ● Kies het tabblad volgens de instellingen. 4 Klik op [Afdrukken] of op [OK]. ➠ Het afdrukken wordt gestart.
Afdrukken Afdrukken annuleren 258A-036 U kunt het afdrukken annuleren vanaf uw computer of vanaf het bedieningspaneel van de machine. Vanaf een computer(P. 168) Vanaf het bedieningspaneel(P. 169) Vanaf een computer U annuleert het afdrukken vanaf het pictogram van de printer dat wordt weergegeven in het systeemvak van het bureaublad. 1 Dubbelklik op het printerpictogram. Wanneer het printerpictogram niet wordt weergegeven ● Open de printermap ( De printermap weergeven(P.
Afdrukken Annuleren vanuit een programma ● In sommige programma's verschijnt het onderstaande scherm. U kunt het afdrukken annuleren door op [Annuleren] te klikken. Vanaf het bedieningspaneel Annuleer het afdrukken met ◼ Druk op of ( ). om te annuleren Als op het scherm een lijst met documenten verschijnt wanneer u op Selecteer het document dat u wilt annuleren, en selecteer hebt gedrukt .
Afdrukken ● Het is mogelijk dat er nog enkele pagina's worden uitgevoerd nadat u het afdrukken hebt geannuleerd. KOPPELINGEN Basisbewerkingen met de printer(P. 166) Afdrukstatus en logboeken controleren(P.
Afdrukken Afdrukstatus en logboeken controleren 258A-037 U kunt de actuele afdrukstatus en de logboeken voor afgedrukte documenten controleren. ● Wanneer is ingesteld op , kunt u de afdruklogboeken niet inzien. (P. 420) Handig in de volgende situaties ● Als het erg lang duurt voordat uw documenten worden afgedrukt, kunt u de wachtrij bekijken met de documenten die nog niet zijn afgedrukt.
Afdrukken ➠ Geeft de gedetailleerde informatie over het document weer. ● De weergegeven documentnaam of gebruikersnaam komt mogelijk niet overeen met de werkelijke document- of gebruikersnaam. Als er een driecijferig nummer wordt weergegeven bij ● Deze code vertegenwoordigt een foutcode. KOPPELINGEN Basisbewerkingen met de printer(P. 166) Afdrukken annuleren(P. 168) 172 Maatregelen bij iedere foutcode(P.
Afdrukken Verschillende afdrukmethoden 258A-038 Dit gedeelte beschrijft hoe u een document afdrukt door een pincode toe te voegen, hoe u een bestand afdrukt dat is opgeslagen op een USB-geheugenapparaat, zonder gebruik te maken van een printerstuurprogramma, en hoe u Ifaxen ontvangt en afdrukt. Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P. 174) Afdrukken vanaf een USBgeheugenapparaat (afdrukken via geheugenmedia)(P. 178) 173 I-Faxen ontvangen om af te drukken(P.
Afdrukken Een met pincode beveiligd document afdrukken (Beveiligde afdruk) 258A-039 Als u gaat afdrukken vanaf een computer, kunt u een pincode instellen voor een document. Het document blijft dan in het geheugen van de machine staan en wordt pas afgedrukt nadat op het bedieningspaneel van de machine de juiste pincode is ingevoerd. Deze functie wordt Beveiligd afdrukken genoemd en het document dat u beveiligt met een pincode wordt een beveiligd document genoemd.
Afdrukken Documenten beveiligd afdrukken 258A-03A In dit gedeelte wordt uitgelegd hoe u een document vanuit een programma kunt afdrukken als een beveiligd document. Er wordt eerst beschreven hoe u een beveiligd document naar de machine stuurt en daarna kunt u lezen hoe u het beveiligde document kunt afdrukken. Een beveiligd document van een computer naar de machine sturen(P. 175) Beveiligde documenten afdrukken(P. 176) De periode instellen waarna beveiligde documenten worden verwijderd(P.
Afdrukken Beveiligde documenten afdrukken Drukt beveiligde documenten af die naar het apparaat zijn verzonden. Als een geldige periode ( De periode instellen waarna beveiligde documenten worden verwijderd(P. 176) ) is verstreken, wordt het beveiligde document verwijderd uit het geheugen van het apparaat en kunt u het niet meer afdrukken. ● Als beveiligde documenten niet worden afgedrukt, nemen ze geheugenruimte in beslag en bestaat de kans dat gewone (onbeveiligde) documenten niet kunnen worden afgedrukt.
Afdrukken 2 Selecteer . 3 Selecteer . ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. Aanmelden bij het apparaat(P. 123) 4 Selecteer . Als niet kan worden geselecteerd ● Stel in op . De functie Beveiligde afdruk uitschakelen ● Stel in op , en start het apparaat dan opnieuw op.
Afdrukken Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia) 258A-03C U kunt bestande rechtstreeks afdrukken door een USB-geheugenapparaat op het apparaat aan te sluiten. Met behulp van deze functie kunt u afdrukken zonder gebruik te maken van een computer. Voor meer informatie over de beschikbare USB-geheugenapparaten en hoe u het USB-geheugenapparaat plaatst / verwijdert, raadpleegt u Een USB-geheugenapparaat plaatsen(P. 90) .
Afdrukken 2 Bij gemengde bestandstypen selecteert u of . De methode van bestandsweergave veranderen U kunt de methode van bestandsweergave selecteren bij 'Voorbeeld' / 'Details'. Voorbeeld Details ● U kunt de inhoud van een PDF-bestand niet bekijken. ● U kunt de methode van bestandsweergave opgeven voor het weergeven van het scherm . (P.
Afdrukken Gebruik voor het afdrukken van bestanden het papier dat in de multifunctionele lade is geplaatst. Gebruik voor het afdrukken van bestanden het papier dat in de papierlade (lade 1) van het apparaat is geplaatst. Gebruik voor de kopieën het papier dat in de optionele cassette feeding module (lade 2) is geplaatst. ● Als u andere afdrukinstellingen wilt opgeven, selecteert u . U kunt de helderheid van afdrukken aanpassen.
Afdrukken Drukt af op één kant van het papier. Hiermee wordt zodanig op beide kanten van het papier afgedrukt dat de afgedrukte pagina ´s horizontaal worden geopend nadat ze zijn ingebonden. Hiermee wordt zodanig op beide kanten van het papier afgedrukt dat de afgedrukte pagina ´s verticaal worden geopend nadat ze zijn ingebonden. ● <2-zijdig afdrukken> is eventueel niet voor alle formaten of soorten papier beschikbaar. papier(P.
Afdrukken ● Voor een PDF-bestand kunt u 9 of 16 pagina's beelddata aan één kant van een vel papier afdrukken, met behulp van onder . U kunt de afdrukinstellingen voor JPEG- en TIFF-afbeeldingen wijzigen. <2-zijdig afdrukken> U kunt dubbelzijdige afdrukken maken. Selecteer de inbindpositie. (Uitsluitend JPEG-bestanden) Drukt data voor meerdere pagina's met beelddata op dezelfde kant van een vel papier.
Afdrukken Kies deze optie om beelden met een fijne gradatie, zoals beelden van een digitale camera, met een vloeiende afwerking af te drukken. Kies deze optie om beelden met kleine tekst of dunne lijnen scherp af te drukken. U kunt de afdrukinstellingen voor PDF-bestanden wijzigen. <2-zijdig afdrukken> U kunt dubbelzijdige afdrukken maken. Selecteer de inbindpositie.
Afdrukken Geef op of u het afdrukbereik wilt vergroten tot het papierformaat. ● Als u instelt, wordt een deel van de afdrukgegevens in randgedeeltes misschien niet afgedrukt, of wordt het papier misschien gedeeltelijk vuil, afhankelijk van het document. Met deze instelling kunt u opgeven of aantekeningen in het PDF-bestand moeten worden afgedrukt. Geen aantekeningen afdrukken.
Afdrukken Selecteer het element dat voorrang moet krijgen bij een kleurinstelling in . Raadpleeg (P. 395) voor de beschrijving van de instelling. Opgeven of CMYK-data kan worden overdrukt, met opgegeven overdruk, als composiet-uitvoer. Raadpleeg (P. 397) voor de beschrijving van de instelling. Geef op op welke manier kleurendata in zwart/wit moet worden afgedrukt. Zie (P.
Afdrukken 5 Selecteer . ➠ selecteren start afdrukken in zwart-wit. selecteren start afdrukken in kleur. ● Als u het afdrukken wilt annuleren, selecteert u ● Als u altijd dezelfde afdrukinstellingen wilt gebruiken: . Geheugenmedia afdruk(P. 160) Een bestand afdrukken van een USB-geheugenapparaat in het Model zwartwit LCD 1 Selecteer in het scherm Start. 2 Selecteer . Het scherm Start(P.
Afdrukken Alle bestanden selecteren 1 Selecteer . ● Als u alle selecties wilt opheffen, selecteert u . 2 Bij gemengde bestandstypen selecteert u of . 4 Selecteer . 5 Geef de gewenste afdrukinstellingen op. ● Selecteer de menuoptie die u wilt instellen. Geef het aantal afdrukken op . Voer met de numerieke toetsen een aantal in, en druk op . Selecteer of u gegevens in zwart-wit of in kleur wilt afdrukken.
Afdrukken Drukt data voor meerdere pagina's met beelddata op dezelfde kant van een vel papier. U kunt het aantal pagina's opgeven dat op één kant van een vel papier moet worden afgedrukt. Bijvoorbeeld: om vier pagina's op één kant van een vel papier af te drukken, selecteert u <4 op 1>. <2-zijdig> U kunt dubbelzijdige afdrukken maken. Selecteer de inbindpositie.
Afdrukken U kunt de helderheid van afbeeldingen aanpassen. Na aanpassing drukt u op . ● U kunt de van TIFF-bestanden uitsluitend aanpassen als deze via JPEG zijn gecomprimeerd. U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit.
Afdrukken ● Als het opgegeven paginabereik niet overeenkomt met de pagina´s van het PDF-bestand, wordt er niets afgedrukt. Geef op of de grootte van de afdruk wordt aangepast aan het afdrukbereik van het papier. Let op: vergroten of verkleinen heeft geen invloed op de lengte/breedte-verhouding van het origineel. Geef op of u het afdrukbereik wilt vergroten tot het papierformaat.
Afdrukken Geef op of u grijs-data wilt omzetten naar CMYK-data (cyan, magenta, yellow, en black) met behulp van het grijswaardenprofiel van het apparaat. Raadpleeg (P. 393) voor de beschrijving van de instelling. Selecteer het juiste profiel voor afdrukdata. u kunt deze optie opgeven voor ieder afbeeldingstype in een (P. 394) voor de beschrijving van de instelling. document.
Afdrukken Configureer de vloei-instellingen voor het afdrukken van gradatie (kleurdichtheid) van grafische afbeeldingen (bijvoorbeeld afbeeldingen die zijn gemaakt met behulp van toepassingen), of bitmapafbeeldingen met een vloeiende afwerking. geeft een sterker vloei-effect dan . U (P. 364) voor de beschrijving van de instelling. 6 Selecteer .
Afdrukken I-Faxen ontvangen om af te drukken 258A-03E Internet Fax (I-Fax) is een functie die een bestand zoals TIFF-afbeeldingsbestanden aan een e-mail toevoegt en verzendt. Dit apparaat kan I-Faxen ontvangen en afdrukken. I-Faxes kunnen op de opgegeven intervallen automatisch worden ontvangen, en ook handmatig worden ontvangen. De instellingen voor het ontvangen van I-Faxen configureren(P. 193) I-Faxen handmatig ontvangen(P.
Afdrukken [POP-server] Voer met alfanumerieke tekens de naam van de POP3-server of het IP-adres in voor het ontvangen van IFaxen in. [Gebruikersnaam] Voer met alfanumerieke tekens de gebruikersnaam in voor het opgegeven e-mail-account. [Wachtwoord instellen/wijzigen] Als u het wachtwoord wilt instellen of veranderen, schakelt u het selectievakje in en typt u alfanumerieke tekens in [Wachtwoord]. [POP RX] Schakel het selectievakje in als u I-Faxen wilt ontvangen.
Afdrukken De instelling voor dubbelzijdig afdrukken opgeven (P. 404) Het papierformaat opgeven (P. 405) ● Afhankelijk van het netwerk dat u gebruikt, moet u mogelijk de instelling van de POP3-poort veranderen ( Poortnummers wijzigen(P. 244) ). Neem voor meer informatie contact op met uw internetprovider of de netwerkbeheerder.
Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen ........................................................................................................ 197 Verbinden met mobiele apparaten .................................................................................................................. 198 Verbinding maken via een draadloos LAN router (LAN-verbinding) ..............................................................
Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen 258A-03F Door het apparaat te koppelen aan een mobiel toestel, zoals een smartphone of tablet, kunt u gemakkelijk een juiste toepassing gebruiken voor het afdrukken of een andere bewerking. Tevens kunt u met behulp van een mobiel toestel gebruiken het apparaat op afstand bedienen om de afdrukstatus te bevestigen en de instellingen van het apparaat te wijzigen. Verbinden met mobiele apparaten(P. 198) Direct verbinden (toegangspuntmodus)(P.
Aan mobiele apparaten koppelen Verbinden met mobiele apparaten 258A-03H Er zijn twee manieren om een mobiel apparaat te verbinden met het apparaat: via draadloos LAN router, en draadloos en rechtstreeks met het apparaat communiceren. Selecteer de verbindingsmethode die het beste bij uw communicatie-omgeving en apparaten past. Realiseer communicatie met mobiele apparaten van ( Het scherm Start(P. 107) ).
Aan mobiele apparaten koppelen Verbinding maken via een draadloos LAN router (LANverbinding) 258A-03J Als een draadloos LAN router is verbonden met het netwerk waarop ook het apparaat is verbonden, kunt u communicatie met het mobiele toestel via de draadloos LAN router op dezelfde manier realiseren voor een computer. Raadpleeg voor meer informatie over hoe u een mobiel toestel aansluit op de LAN router, de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant.
Aan mobiele apparaten koppelen 3 Start Canon PRINT Business op het mobiele toestel. 4 Lees de QR-code op het scherm met behulp van het mobiele toestel. Het apparaat door toepassingen gebruiken(P. 206) ◼ Verbinden met behulp van de NFC (Android) Voordat u het NFC gebruikt, controleert u of is ingesteld op . 1 Start Canon PRINT Business op het mobiele toestel. toepassingen gebruiken(P. 206) (P.
Aan mobiele apparaten koppelen Direct verbinden (toegangspuntmodus) 258A-03K Zelfs in een omgeving zonder draadloos LAN router kunt u met behulp van de 'Toegangspuntmodus', die rechtstreeks een draadloze verbinding tot stand kan brengen tussen het apparaat en uw mobiele toestel, verbinding maken tussen het aanwezige mobiele toestel en het apparaat, zonder moeilijke instellingen. Voorbereiden voor directe verbinding (Toegangspuntmodus)(P. 201) Direct verbinden (Model aanraakscherm)(P.
Aan mobiele apparaten koppelen Meerdere mobiele apparaten tegelijkertijd aansluiten (P. 312) Canon PRINT Business ● Voor informatie over besturingssystemen die compatibel zijn met Canon PRINT Business, de gedetailleerde instelprocedure, en de bedieningsprocedure, raadpleegt u de toepassingen-help of de Canon (http:// www.canon.com/gomp/).
Aan mobiele apparaten koppelen 5 Lees de QR-code op het scherm met behulp van het mobiele toestel. 6 Als de doelbewerking is voltooid, selecteert u . ◼ Verbinden met behulp van de NFC (Android) Voordat u het NFC gebruikt, controleert u of is ingesteld op . 1 Selecteer in het scherm Start. (P. 420) Het scherm Start(P. 107) ● Als reeds enig mobiel toestel is verbonden, gaat u naar stap 3. 2 Selecteer .
Aan mobiele apparaten koppelen ● Bij een Directe verbinding zult u afhankelijk van uw mobiele toestel misschien geen verbinding met Internet kunnen krijgen. ● Als een draadloze verbinding vanaf het mobiele toestel niet binnen 5 minuten tot stand wordt gebracht terwijl de SSID en de netwerksleutel worden weergegeven, wordt de wachttijd voor de verbinding beëindigd.
Aan mobiele apparaten koppelen ● Bij een Directe verbinding zult u afhankelijk van uw mobiele toestel misschien geen verbinding met Internet kunnen krijgen. ● Als een draadloze verbinding vanaf het mobiele toestel niet binnen 5 minuten tot stand wordt gebracht terwijl de SSID en de netwerksleutel worden weergegeven, wordt de wachttijd voor de verbinding beëindigd.
Aan mobiele apparaten koppelen Het apparaat door toepassingen gebruiken 258A-03L Afdrukken en andere bewerkingen realiseren vanaf het mobiele toestel dat is verbonden met het apparaat, met behulp van toepassingen. Verschillende toepassingen inclusief toepassingen die exclusief voor Canon zijn, worden ondersteund. Gebruik ze correct in overeenstemming met het apparaat, de toepassing, en de situatie.
Aan mobiele apparaten koppelen ◼ Afdrukken met Google Cloudprinter U kunt toepassingen en diensten gebruiken die Google Cloudprinter gebruiken om af te drukken vanaf een computer of mobiel toestel zonder een printerstuurprogramma te gebruiken. Google Cloudprinter gebruiken(P.
Aan mobiele apparaten koppelen AirPrint gebruiken 258A-03R Dit gedeelte beschrijft de instellingen die nodig zijn om AirPrint te gebruiken en de te verrichten procedures bij gebruik van Apple toestellen. AirPrint-instellingen AirPrint-instellingen configureren(P. 208) Het scherm voor AirPrint weergeven(P. 211) Functies van AirPrint Afdrukken met AirPrint(P. 213) Problemen oplossen Als AirPrint gebruiken niet mogelijk is(P.
Aan mobiele apparaten koppelen 5 Geef de vereiste instellingen op. [AirPrint gebruiken] Schakel dit selectievakje in als u wilt afdrukken met AirPrint. Schakel het selectievakje uit als u AirPrint wilt uitschakelen. [Printernaam] Voer de naam van het apparaat in. Als een mDNS-naam reeds is geregistreerd in [mDNS-instellingen] ( DNS configureren(P. 65) ), verschijnt de geregistreerde naam. [Locatie] Voer de locatie van het apparaat in.
Aan mobiele apparaten koppelen ● Als u de printernaam invoert, kunt u meerdere printers die compatibel zijn met AirPrint gemakkelijker identificeren. ◼ Instelling van beschikbare functies in AirPrint wijzigen Als u ongebruikte functies in AirPrint wilt uitschakelen of als u de communicatie wilt versleutelen, configureert u de desbetreffende instelling met behulp van het bedieningspaneel. Afdrukinstellingen veranderen Bij het afdrukken met AirPrint wordt gebruikgemaakt van het IPP-protocol.
Aan mobiele apparaten koppelen Het scherm voor AirPrint weergeven U kunt het scherm van AirPrint weergeven en zo niet alleen toegang krijgen tot de verschillende AirPrint-instellingen, maar ook gegevens van verbruiksartikelen bekijken, zoals papier en tonercartridge. Verder kunt u instellingen van beveiligingsfuncties realiseren. 1 Selecteer [Systeemvoorkeuren] [Printers en scanners], en voeg het apparaat toe aan de door u gebruikte Mac.
Aan mobiele apparaten koppelen [AirPrint-instellingen] Hiermee kunt u de waarden controleren die zijn ingevoerd in de AirPrint-instellingen, zoals de naam en locatie van het apparaat. U kunt op [Bewerken] klikken om de instellingen te veranderen. [Andere instellingen] [Beveiligingsinstellingen voor afdrukken] Configureer de beveiligingsinstellingen voor afdrukken met behulp van TLS of authenticatie. [TLS-instellingen] Hiermee kunt u de voor TLS gebruikte sleutel en certificaat veranderen.
Aan mobiele apparaten koppelen Afdrukken met AirPrint 258A-03S U kunt afdrukken vanaf een iPad, iPhone, iPod touch, of Mac zonder dat u het printerstuurprogramma hoeft te gebruiken. Afdrukken vanaf een iPad, iPhone of iPod touch(P. 213) Afdrukken vanaf een Mac(P. 214) Systeemvereisten Voor het afdrukken met AirPrint is één van de volgende Apple toestellen vereist. ● iPad (alle modellen) ● iPhone (3GS of hoger) ● iPod touch (derde generatie of hoger) ● Mac (Mac OS X 10.7 of later)* *OS X v10.
Aan mobiele apparaten koppelen 2 Tik in het programma op het Apple-apparaat op om de menuopties weer te geven. 3 Tik op [Druk af]. 4 Selecteer dit apparaat uit de lijst [Printer]. ● De printers in het netwerk worden hier weergegeven. Selecteer dit apparaat. ● Het scherm voor het selecteren van dit apparaat in [Printer] wordt niet weergegeven in programma's die geen ondersteuning bieden voor AirPrint. U kunt dan ook niet draadloos afdrukken vanuit deze programma's.
Aan mobiele apparaten koppelen ● De printers die verbinding hebben met de Mac, worden weergegeven. Selecteer dit apparaat in deze stap. 5 Geef de gewenste afdrukinstellingen op. ● De beschikbare instellingen en papierformaten verschillen afhankelijk van de applicatie die u gebruikt. 6 Klik op [Druk af]. ➠ Het afdrukken wordt gestart.
Aan mobiele apparaten koppelen Als AirPrint gebruiken niet mogelijk is 258A-03U Als AirPrint gebruiken niet mogelijk is, probeer dan een van de volgende oplossingen. ● Controleer dat het apparaat is ingeschakeld. Als het apparaat is ingeschakeld, schakel het dan eerst uit, wacht ten minste 10 seconden en zet het vervolgens weer aan en kijk of het probleem is verholpen. ● Controleer of er geen foutberichten worden weergegeven op de machine.
Aan mobiele apparaten koppelen Google Cloudprinter gebruiken 258A-03W Google Cloudprinter is een service waarmee een gebruiker met een Google-account met behulp van toepassingen die compatibel zijn Google Cloudprinter, kan afdrukken vanaf een smartphone, tablet of computer. In tegenstelling tot conventioneel afdrukken vanaf een computer, heeft het geen printerstuurprogramma nodig. De instellingen van het apparaat controleren(P. 217) De machine registreren bij Google Cloudprinter(P.
Aan mobiele apparaten koppelen ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) . 1 2 Start de externe UI en meld u aan als een beheerder. De UI op afstand starten(P. 276) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 277) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken] voor [Basisinstellingen].
Aan mobiele apparaten koppelen Registreren vanaf een mobiel toestel of vanuit Google Chrome ● U kunt het apparaat registreren vanaf een mobiel toestel of vanuit Google Chrome. Het display van het apparaat geeft het volgende bevestigingsscherm weer voordat de registratie is voltooid. Druk op om de registratie te voltooien. ● Zie voor informatie over registratiemethoden de handleiding van het toestel of de website van Google Cloudprinter.
Aan mobiele apparaten koppelen Het apparaat via afstandsbediening beheren 258A-03X U kunt de externe UI gebruiken vanaf een webbrowser die op uw smartphone of tablet is geïnstalleerd. Zo kunt u vanaf een mobiel toestel de status van het apparaat controleren en verschillende instellingen realiseren. Geschikte webbrowsers De volgende webbrowsers ondersteunen de externe UI voor mobiele toestellen.
Het apparaat beheren Het apparaat beheren Het apparaat beheren ................................................................................................................................. 222 Toegangsmachtigingen instellen ..................................................................................................................... 224 De systeembeheerders-ID en pincode instellen ...........................................................................................
Het apparaat beheren Het apparaat beheren 258A-03Y Om de verschillende risico's bij het gebruik van dit apparaat (bijvoorbeeld lekken van persoonlijke informatie of onbevoegd gebruik door derden) te verminderen, zijn constante en effectieve veiligheidsmaatregelen vereist. Een beheerder moet belangrijke instellingen beheren (zoals toegang tot veiligheidsinstellingen) om te garanderen dat het apparaat veilig wordt gebruikt. ◼ Het basisbeheersysteem configureren Toegangsmachtigingen instellen(P.
Het apparaat beheren ◼ De systeemconfiguratie en -instellingen beheren De Firmware updaten(P. 290) Initialiseer instellingen(P.
Het apparaat beheren Toegangsmachtigingen instellen 258A-040 Beveilig het apparaat tegen toegang door onbevoegden door alleen gebruikers met toegangsrechten toe te staan het apparaat te gebruiken. Toegangsrechten worden apart ingesteld voor systeembeheerders, algemene gebruikers en de UI op afstand. Wanneer toegangsrechten zijn ingesteld, moet de gebruiker een ID en pincode invoeren als hij of zij wil afdrukken of instellingen wil wijzigen.
Het apparaat beheren De systeembeheerders-ID en pincode instellen 258A-041 Stel het account voor de systeembeheerder 'ID systeembeheerder' in. U kunt ook een pincode instellen bij de ID systeembeheerder. Als de 'ID systeembeheerder' is opgegeven, hebt u bijvoorbeeld uitsluitend beheerdersrechtentoegang tot en als de ID systeembeheerder en bijbehorende pincode juist zijn ingevoerd.
Het apparaat beheren ● Vergeet uw pincode niet. Weet u uw pincode niet meer, neem dan contact op met de plaatselijke officiële Canon-dealer of de Canon-help-lijn. Instellingen configureren via de UI op afstand ● Start de externe UI en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/registratie] [Gebruikersbeheer] [Systeembeheerderinformatie] [Bewerken] en geef de gewenste instellingen op.
Het apparaat beheren Afdeling-ID beheer configureren 258A-042 U kunt de toegang tot het apparaat beheren door meerdere ID's te gebruiken voor meerdere gebruikers of groepen. Als een gebruiker probeert het apparaat te gebruiken terwijl Afdeling ID beheer is ingeschakeld, verschijnt er een aanmeldingsscherm en moet de gebruiker zijn of haar Afdeling ID met bijbehorende pincode invoeren om toegang te krijgen tot het apparaat.
Het apparaat beheren 2 Geef de vereiste instellingen op. [Afdelings-ID] Voer de te registreren afdelings-ID in. [Pincode instellen] Als u een pincode wilt instellen, schakelt u het selectievakje in en voert u hetzelfde nummer in beide tekstvakken in: [Pincode] en [Bevestigen]. [Functies beperken] U kunt een beperking instellen voor het aantal af te drukken pagina's en de functies die voor afdelingen beschikbaar zijn.
Het apparaat beheren Afdeling-ID beheer inschakelen Nadat u het gewenste aantal afdelings-id's hebt geregistreerd, kunt u Afdeling-ID beheer inschakelen. 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 276) Klik op [Instellingen/registratie] op de portaalpagina. UI(P. 277) 3 Selecteer [Gebruikersbeheer] 4 Klik op [Bewerken]. 5 Schakel het selectievakje [Afdelings-ID beheer] in. Scherm van externe [Afdelings-ID beheer].
Het apparaat beheren Het bedieningspaneel gebruiken ● U kunt ook het Afdelings-ID-beheer Aan/Uit zetten vanuit
Het apparaat beheren Voer het nummer van de Afdelings-ID in. [Pincode] Voer, naar noodzaak, de pincode in die bij de afdelings-ID behoort. [Verifiëren] Klik hierop om te controleren of de juiste id en pincode zijn ingevoerd. Deze functie is niet beschikbaar als het apparaat en de computer via een USB- of een WSD-poort (Web Services on Devices) met elkaar zijn verbonden.
Het apparaat beheren 5 Schakel, naar noodzaak, de keuzevakjes uit. [Afdrukopdrachten met onbekende ID's toestaan] Als u een taak wilt verzenden vanaf een computer terwijl Afdeling-ID-beheer is ingeschakeld, moet u de juiste ID en pincode invoeren ( Afdelings-ID-beheer instellen voor taken vanaf een computer(P. 230) ). Maar als het selectievakje voor deze instelling is ingeschakeld, kunnen taken ook worden verricht u zonder dat de ID en pincode zijn ingevoerd.
Het apparaat beheren Een pincode instellen voor UI op afstand 258A-043 U kunt een pincode instellen voor toegang tot de UI op afstand. Alle gebruikers gebruiken een gewone pincode. ● Wanneer Afdelings-ID beheer is ingeschakeld, is deze instelling niet vereist. configureren(P. 227) Afdeling-ID beheer ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) .
Het apparaat beheren Het bedieningspaneel gebruiken ● U kunt de pincode-instellingen voor toegang tot de UI op afstand ook bereiken via
Het apparaat beheren De netwerkinstellingen configureren 258A-044 Bevoegde gebruikers kunnen worden benadeeld door aanvallen van kwaadwillende personen, bijvoorbeeld door sniffing, spoofing en het manipuleren van gegevens die over een netwerk worden verzonden. Om uw belangrijke en kostbare gegevens te beschermen tegen deze aanvallen, ondersteunt de machine de volgende functies ter verbetering van de veiligheid en beveiliging.
Het apparaat beheren IPSec-communicatie Terwijl TLS alleen de gegevens codeert die in een bepaald programma worden gebruikt, zoals een webbrowser of een e-mailprogramma, worden met IPSec alle IP-pakketten (of payloads daarvan) gecodeerd. Dit betekent dat met IPSec een flexibelere beveiliging kan worden gerealiseerd dan met TLS. IPSec-instellingen configureren(P. 258) Verificatie met IEEE 802.1X IEEE 802.
Het apparaat beheren Communicatie beperken door firewalls in te stellen 258A-045 Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten. Op deze manier wordt de communicatie beperkt tot apparaten met bepaalde IPadressen of MAC-adressen. IP-adressen opgeven voor firewallinstellingen(P.
Het apparaat beheren IP-adressen opgeven voor firewallinstellingen 258A-046 U kunt de communicatie beperken tot alleen apparaten met bepaalde IP-adressen, of apparaten met specifieke IPadressen blokkeren maar andere communicatie toestaan. U kunt een afzonderlijk IP-adres opgeven of een bereik van IP-adressen. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) .
Het apparaat beheren 1 Schakel het selectievakje [Gebruik filter] in en selecteer het keuzerondje [Weigeren] of [Toestaan] voor het [Standaardbeleid]. [Gebruik filter] Schakel het selectievakje in als u de communicatie wilt beperken. Schakel het selectievakje uit als u de beperking wilt opheffen. [Standaardbeleid] Selecteer de voorwaarde voor het toestaan of weigeren van de communicatie van andere toestellen met het apparaat.
Het apparaat beheren 3 6 Klik op [OK]. Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt ook het filteren van IP-adressen in- of uitschakelen vanuit
in het scherm Start. (P. 326) (P. 326) KOPPELINGEN MAC-adressen opgeven voor firewallinstellingen(P.Het apparaat beheren MAC-adressen opgeven voor firewallinstellingen 258A-047 U kunt de communicatie beperken tot alleen apparaten met bepaalde MAC-adressen of apparaten met specifieke MAC-adressen blokkeren maar andere communicatie toestaan. Deze functie is niet beschikbaar wanneer het apparaat is verbonden met een draadloos LAN.
Het apparaat beheren 1 Schakel het selectievakje [Gebruik filter] in en selecteer het keuzerondje [Weigeren] of [Toestaan] voor het [Standaardbeleid]. [Gebruik filter] Schakel het selectievakje in als u de communicatie wilt beperken. Schakel het selectievakje uit als u de beperking wilt opheffen. [Standaardbeleid] Selecteer de voorwaarde om de communicatie van andere apparaten met het apparaat toe te staan of te weigeren.
Het apparaat beheren 3 6 Klik op [OK]. Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt ook het filteren van MAC-adressen in- of uitschakelen vanuit
in het scherm Start. adresfilter>(P. 327) KOPPELINGEN IP-adressen opgeven voor firewallinstellingen(P.Het apparaat beheren Poortnummers wijzigen 258A-048 Poorten vormen het eindpunt van het communicatietraject tussen apparaten. Belangrijke protocollen maken meestal gebruik van vaste poortnummers. Een nadeel hiervan is dat apparaten met deze poortnummers kwetsbaar zijn voor aanvallen, iedereen weet de poortnummers namelijk. De netwerkbeheerder kan de beveiliging verder verbeteren door andere poortnummers te gebruiken.
Het apparaat beheren Een proxy instellen 258A-049 Een proxy (of HTTP-proxyserver) verwijst naar een computer of software die HTTP-communicatie uitvoert voor andere apparaten, met name bij communicatie met bronnen buiten het netwerk, zoals bij het browsen op websites. De clientapparaten maken via de proxyserver verbinding met het externe netwerk en communiceren niet rechtstreeks met de externe bronnen.
Het apparaat beheren Schakel het selectievakje in om de opgegeven proxyserver te gebruiken voor communicatie met een HTTPserver. [Adres HTTP-proxyserver] Voer het adres van de proxyserver in. Geef het IP-adres op of de hostnaam, afhankelijk van de omgeving. [Poortnummer HTTP-proxyserver] Het poortnummer naar noodzaak wijzigen. [Gebruik proxy binnen zelfde domein] Schakel het selectievakje in als u ook de opgegeven proxyserver wilt gebruiken voor communicatie met toestellen in hetzelfde domein.
Het apparaat beheren De sleutel en certificaat voor TLS configureren 258A-04A Met TLS (Transport Layer Security) kunt u de communicatie versleutelen die plaatsvindt tussen het apparaat en een webbrowser op de computer. TLS is een techniek voor het versleutelen van gegevens die via het netwerk worden verzonden of ontvangen. TLS moet zijn ingeschakeld wanneer u de UI op afstand gebruikt voor het opgeven van instellingen voor IPSec (Methode gedeelde sleutel), IEEE 802.1X-verificatie (TTLS/PEAP) of SNMPv3.
Het apparaat beheren 7 Klik op [Bewerken]. 8 Schakel het selectievakje [Gebruik TLS] in en klik op [OK]. 9 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt communicatie met TLS-versleuteling ook in- of uitschakelen vanuit
in het scherm Start. /(P.Het apparaat beheren Een sleutel en certificaatondertekeningsverzoek (CSR) aanmaken(P. 253) De sleutel en certificaat voor netwerkcommunicatie registreren(P. 256) IPSec-instellingen configureren(P. 258) IEEE 802.1X-verificatie-instellingen configureren(P. 265) De machine bewaken en bedienen met SNMP(P.
Het apparaat beheren De sleutel en certificaat voor netwerkcommunicatie genereren 258A-04C U kunt een sleutel en certificaat genereren met het apparaat als dit nodig is voor gecodeerde communicatie via Transport Layer Security (TLS). U kunt TLS gebruiken voor toegang tot het apparaat via de externe UI. Zelfondertekende certificaten worden gebruikt bij de sleutel en certificaat die zijn gegenereerd in 'Netwerkcommunicatie'.
Het apparaat beheren [Sleutelinstellingen] [Sleutelnaam] Gebruik alfanumerieke tekens voor de naam van de sleutel. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] Selecteer het sleutelgenereeralgoritme uit [RSA] of [ECDSA], en selecteer dan de sleutellengte in de vervolgkeuzelijst. In alle gevallen: hoe groter het getal voor de sleutellengte is, hoe hoger het veiligheidsniveau wordt.
Het apparaat beheren 7 Klik op [OK]. ● Het genereren van sleutel en certificaat kan enige tijd duren. ● Als sleutel en certificaat zijn gegenereerd, worden ze automatisch opgeslagen op het apparaat. KOPPELINGEN De sleutel en certificaat voor netwerkcommunicatie registreren(P. 256) De sleutel en certificaat voor TLS configureren(P. 247) IPSec-instellingen configureren(P.
Het apparaat beheren Een sleutel en certificaatondertekeningsverzoek (CSR) aanmaken 258A-04E Op het apparaat gegenereerde certificaten hebben geen CA-handtekening, een communicatiefout kan het gevolg zijn, afhankelijk van de apparaten waarmee het communiceert. Voordat de certificeringsinstantie het certificaat met CAhandtekening kan afgeven, moet u CSR-gegevens (Certificate Signing Request) verkrijgen die de beheerder van de externe UI kan genereren.
Het apparaat beheren [Sleutelinstellingen] [Sleutelnaam] Gebruik alfanumerieke tekens voor de naam van de sleutel. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] Selecteer het sleutelgenereeralgoritme uit [RSA] of [ECDSA], en selecteer dan de sleutellengte in de vervolgkeuzelijst. In alle gevallen: hoe groter het getal voor de sleutellengte is, hoe langzamer de communicatie verloopt.
Het apparaat beheren ● Er wordt een dialoogvenster voor het opslaan van het bestand weergegeven. Kies waar u het bestand wilt opslaan en klik op [Opslaan]. ➠ Het CSR-bestand wordt opgeslagen op de computer. 9 Hecht het opgeslagen bestand aan en leg de applicatie voor aan de certificeringsinstantie (CA).
Het apparaat beheren De sleutel en certificaat voor netwerkcommunicatie registreren 258A-04F U kunt sleutel en certificaat verkrijgen, en het CA-certificaat van een certificeringsinstantie (CA) voor gebruik met het apparaat. Installeer en registreer de verkregen sleutel en certificaat en het certificaatbestand in dit apparaat met behulp van de externe UI. Controleer eerst sleutel en certificaat, en CA-certificaatcondities die vereist zijn voor het apparaat ( Beheerfuncties(P. 538) ).
Het apparaat beheren 5 Klik op [Installeren]. Het bestand voor sleutel en certificaat, of het CA-certificaat verwijderen ● Klik op [Verwijderen] rechts van het bestand dat u wilt wissen 6 klik op [OK]. Klik op [Bladeren], selecteer het bestand dat u wilt installeren en klik op [Start installatie]. ➠ Het bestand voor sleutel en certificaat, of het CA-certificaatbestand is vanaf een computer geïnstalleerd op het apparaat. 7 Registreer de sleutel en certificaat of het CA-certificaat.
Het apparaat beheren IPSec-instellingen configureren 258A-04H Internet Protocol Security (IPSec of IPsec) bestaat uit een verzameling protocollen voor het coderen van gegevens die worden getransporteerd over een netwerk, inclusief internet-netwerken.
Het apparaat beheren ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 284) . 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 276) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 277) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken].
Het apparaat beheren [Lokaal adres] Selecteer het keuzerondje voor het type IP-adres van het apparaat waarop u het beleid wilt toepassen. [Alle IP-adressen] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten. [IPv4-adres] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten die van of naar het IPv4-adres van het apparaat worden verstuurd.
Het apparaat beheren Beschrijving Een specifiek adres invoeren Voorbeeld IPv4: Gebruik een punt als scheidingsteken. 192.168.0.10 IPv6: fe80::10 Gebruik een dubbele punt als scheidingsteken tussen alfanumerieke tekens. Een bereik van adressen opgeven Plaats een afbreekstreepje tussen de adressen. 192.168.0.10-192.168.0.20 [Subnetinstellingen] Als u het IPv4-adres handmatig invoert, kunt u een bereik opgeven door het subnetmasker te gebruiken.
Het apparaat beheren Geef aan hoe lang een sessie duurt voor IKE SA (ISAKMP SA). Geef de tijd op in minuten. [Authenticatie]/[Encryptie]/[DH-groep] Selecteer een algoritme in de vervolgkeuzelijst. Alle algoritmen worden gebruikt bij het uitwisselen van de sleutels. [Authenticatie] Selecteer het hash-algoritme. [Encryptie] Selecteer het coderingsalgoritme. [DH-groep] Selecteer de Diffie-Hellman-groep, die bepalend is voor de sterkte van de sleutel.
Het apparaat beheren Geef hier de voorwaarden op voor het beëindigen van een sessie voor IPSec SA. IPSec SA wordt gebruikt als een communicatietunnel. Schakel beide selectievakjes in of één van de twee, naargelang de voorwaarden die u wilt instellen. Als u beide selectievakjes inschakelt, wordt de IPSec SA-sessie beëindigd als aan één van de beide voorwaarden wordt voldaan. [Geef tijd op] Typ het aantal minuten voor de tijdsduur van een sessie.
Het apparaat beheren Een beleid verwijderen ● Klik op [Verwijderen] bij de beleidsnaam die u wilt verwijderen 13 klik op [OK]. Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt ook IPSec-communicatie inschakelen of uitschakelen vanuit
in het scherm Start. IPSec>(P. 321) KOPPELINGEN De sleutel en certificaat voor TLS configureren(P. 247) IPSec-beleidslijst(P.Het apparaat beheren IEEE 802.1X-verificatie-instellingen configureren 258A-04J De machine kan als een clientapparaat worden aangesloten op een 802.1X-netwerk. Een doorsnee 802.1X-netwerk bestaat uit een RADIUS-server (verificatieserver), een LAN-switch (authenticator) en clientapparaten met verificatiesoftware (supplicants). Als een apparaat probeert verbinding te maken met het 802.
Het apparaat beheren 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 276) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 277) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken]. 5 Schakel het selectievakje [Gebruik IEEE 802.1X] in, en typ de aanmeldingsnaam in het [IEEE 802.1X-instellingen]. vak [Inlognaam]. [Gebruik IEEE 802.1X] Schakel dit selectievakje in om verificatie met IEEE 802.1X mogelijk te maken.
Het apparaat beheren Details bekijken van een certificaat ● U kunt de details van het certificaat controleren of het certificaat verifiëren door op de gewenste tekstkoppeling onder [Sleutelnaam] te klikken of op het pictogram van het certificaat. TTLS/PEAP instellen 1 Schakel het selectievakje [Gebruik TTLS] of [Gebruik PEAP] in. Intern protocol voor TTLS ● U kunt MSCHAPv2 of PAP selecteren. 2 Klik op [Wijzig gebruikersnaam/wachtwoord].
Het apparaat beheren Het bedieningspaneel gebruiken ● U kunt ook IEEE 802.1X authenticatie inschakelen of uitschakelen vanuit
in het scherm Start. /(P. 325) KOPPELINGEN De sleutel en certificaat voor TLS configureren(P.Het apparaat beheren De functies van de machine beperken 258A-04K De kans bestaat dat sommige functies van de machine bijna nooit worden gebruikt of aanleiding geven voor misbruik. Uit veiligheidsoverwegingen kunt u de functionaliteit van de machine beperken door deze functies geheel of gedeeltelijk uit te schakelen.
Het apparaat beheren Afdrukken vanaf een computer beperken 258A-04L U kunt informatielekken drastisch reduceren door het aantal vanaf een computer afdrukbare documenten te beperken tot de 'Beveiligd afdrukken' documenten ( Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P. 174) ).
Het apparaat beheren Beperkingen instellen voor USB-functies 258A-04R USB is een handige manier om randapparatuur aan te sluiten en gegevens op te slaan of te verplaatsen. Bij een onjuist beheer kan USB echter ook een bron van informatielekkage zijn. Wees voorzichtig wanneer u USBgeheugenapparaten gebruikt. Dit gedeelte beschrijft hoe u de verbinding via de USB-poort van het apparaat kunt beperken en hoe u het gebruik van USB-geheugenapparaten kunt uitsluiten.
Het apparaat beheren Model zwart-wit LCD
Start het apparaat opnieuw op KOPPELINGEN Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia)(P.Het apparaat beheren HTTP-communicatie uitschakelen 258A-04S HTTP wordt gebruikt voor communicatie via het netwerk, bijvoorbeeld wanneer u het apparaat bedient via de UI op afstand. Als u een USB-verbinding gebruikt of HTTP om een andere reden niet nodig hebt, kunt u het protocol uitschakelen om aanvallen van kwaadwillende gebruikers via de ongebruikte HTTP-poort te voorkomen.
Het apparaat beheren De UI op afstand uitschakelen 258A-04U De UI op afstand is handig omdat u dan instellingen voor de machine kunt opgeven via een webbrowser op een computer. U kunt de UI op afstand alleen gebruiken als de machine via het netwerk is verbonden met een computer.
Het apparaat beheren Het apparaat vanaf een computer beheren (externe UI) 258A-04W Als u een webbrowser gebruikt om het apparaat op afstand te bedienen, kunt u de documenten die wachten om te worden afgedrukt, of de status van het apparaat controleren. U kunt ook verschillende instellingen realiseren. U hoeft uw bureau dus niet te verlaten om systeembeheertaken uit te voeren. Voor meer informatie over de systeemvereisten voor de externe UI, raadpleegt u Besturingssystemen(P. 540) .
Het apparaat beheren De UI op afstand starten 258A-04X Om het apparaat op afstand te bedienen, moet u het IP-adres van het apparaat in een webbrowser invoeren en de UI op afstand opstarten. Controleer vooraf het IP-adres dat op het apparaat is ingesteld ( Netwerkinstellingen weergeven(P. 47) ). Als u vragen hebt, neemt u contact op met de netwerkbeheerder. 1 Start de webbrowser. 2 Typ 'http:///' in het adresveld en druk op [ENTER].
Het apparaat beheren [Toegangspincode externe UI] Als [Toegangspincode externe UI] is ingesteld, voer dan de pincode in. afstand(P. 233) Een pincode instellen voor UI op Wanneer Afdelings-id beheer is ingeschakeld Voer het juiste ID in bij [Afdelings-ID] en pincode bij [Pincode]. 4 Afdeling-ID beheer configureren(P. 227) Klik op [Aanmelden]. ➠ De portaalpagina (hoofdpagina) wordt weergegeven. Scherm van externe UI(P.
Het apparaat beheren [Ondersteuningskoppeling] Hier ziet u de koppeling voor ondersteuning die is opgegeven bij [Ondersteuningskoppeling] onder [Licentie/ overig]. Pictogram Vernieuwen Hiermee vernieuwt u de weergegeven pagina. [Language] Hiermee selecteert u de taal voor de schermen van de externe UI. [Afmelden] Hiermee meldt u zich af bij de UI op afstand. UI staat trouwens voor User Interface, ofwel gebruikersinterface in het Nederlands. De aanmeldingspagina wordt vervolgens weergegeven.
Het apparaat beheren Status en logboeken controleren 258A-04Y De huidige status van afdruktaken controleren(P. 279) Taakgeschiedenis controleren(P. 280) Foutgegevens controleren(P. 280) Verbruiksartikelen controleren(P. 280) Apparaatspecificaties controleren(P. 281) Gegevens van systeembeheerder controleren(P. 281) Totaal aantal afdrukken controleren(P. 282) Geschiedenis van tonercartridges bekijken(P. 282) ● Een bestandsnaam van een document wordt misschien niet volledig weergegeven.
Het apparaat beheren Taakgeschiedenis controleren De opdrachtlogboeken voor het afdrukken of ontvangen (RX) verschijnen. Log in op de externe UI ( [Opdrachtlog] De UI op afstand starten(P. 276) ) [Statusmonitor/annuleren] Foutgegevens controleren Als er een fout optreedt, kunt u deze pagina weergeven door op de portaalpagina (de hoofdpagina) op het bericht te klikken onder [Foutgegevens]. Scherm van externe UI(P. 277) Log in op de externe UI ( [Foutgegevens] De UI op afstand starten(P.
Het apparaat beheren Log in op de UI op afstand ( [Verbruiksartikelen] De UI op afstand starten(P. 276) ) [Statusmonitor/annuleren] Apparaatspecificaties controleren De maximale afdruksnelheid en de apparaatfuncties verschijnen. Log in op de externe UI ( [Apparaatfuncties] De UI op afstand starten(P. 276) ) [Statusmonitor/annuleren] Gegevens van systeembeheerder controleren U kunt informatie over het apparaat en de systeembeheerder weergeven.
Het apparaat beheren Totaal aantal afdrukken controleren Geef het totaal aantal bladzijden weer dat is afgedrukt. Log in op de externe UI ( De UI op afstand starten(P. 276) ) [Controleer tellerstand] [Statusmonitor/annuleren] Geschiedenis van tonercartridges bekijken U kunt de gebruikslogboeken van tonercartridges, en andere logboeken controleren. Het display kan voor iedere kleur uit de tonercartridge worden veranderd. Log in op de externe UI ( [Cartridgelog] De UI op afstand starten(P.
Het apparaat beheren KOPPELINGEN Scherm van externe UI(P.
Het apparaat beheren Menuopties instellen via de UI op afstand 258A-050 U kunt verschillende instellingen van de machine wijzigen met de externe UI. De meeste instellingen kunnen ook via het bedieningspaneel van de machine worden gewijzigd, maar sommige instellingen kunt u alleen wijzigen via de externe UI. Dit gedeelte beschrijft de basisprocedure voor het veranderen van de instelling van het apparaat met behulp van de externe UI.
Het apparaat beheren 5 Klik op [Bewerken]. 6 Geef de vereiste instellingen op. 7 Klik op [OK].
Het apparaat beheren 8 Start, naar noodzaak, de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. ● Voor informatie of u het apparaat opnieuw moet opstarten, raadpleegt u het bericht op het bewerkingsscherm.
Het apparaat beheren De insteldata importeren en exporteren 258A-051 Data van apparaatinstellingen kan op de computer worden opgeslagen (exporteren). Omgekeerd kan ook. Data die is opgeslagen op uw computer kan worden overgebracht naar het apparaat (importeren). Data die vanaf dit apparaat is geëxporteerd, kan worden geïmporteerd in een ander apparaat van hetzelfde model. U kunt dus gemakkelijk een groot aantal instellingen naar meerdere apparaten kopiëren.
Het apparaat beheren [Encryptiewachtwoord] Voer een wachtwoord voor versleuteling van de exportdata in met behulp van alfanumerieke tekens. Voer hetzelfde wachtwoord in in [Bevestigen]. Voor het exporteren van gegevens moet u een wachtwoord voor versleuteling instellen. ● Het wachtwoord is vereist bij het importeren van geëxporteerde gegevens. importeren(P. 288) 5 6 De insteldata Klik op [Start exporteren]. Volg de aanwijzingen op het scherm om de locatie op te geven voor de geëxporteerde data.
Het apparaat beheren [Bestandspad] Klik op [Bladeren] en selecteer het bestand. U kunt uitsluitend informatiebestanden met instellingen van het apparaat (*.dcm) importeren. [Decryptiewachtwoord] Voer het wachtwoord in dat is ingesteld toen de instellingen werden geëxporteerd. 5 Klik op [Start importeren]. 6 Klik op [OK]. ➠ De geselecteerde instelgegevens worden in het apparaat geladen. 7 Klik op [OK].
Het apparaat beheren De Firmware updaten 258A-052 Voor het bijwerken van de firmware selecteert u de updatemethode die past bij de installatievereisten van het apparaat. Er zijn twee manieren om de firmware bij te werken. De eerste manier is door de meeste recente versie van de firmware via het apparaat van internet te downloaden en de update uit te voeren als uw apparaat niet de laatste versie heeft.
Het apparaat beheren 3 Selecteer . ➠ Als de firmware is geactualiseerd, start het apparaat automatisch opnieuw op. ● Zet het apparaat niet UIT wanneer het opnieuw starten plaatsvindt. ◼ Model zwart-wit LCD 1 Selecteer in het scherm Start. 2 Selecteer . Het scherm Start(P. 107) ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. het apparaat(P.
Het apparaat beheren Het apparaat in de stand 'Wachten op update firmware' zetten
firmware> / De firmwareversie controleren 1 Selecteer in het scherm Start. 2 Selecteer . Het scherm Start(P. 107) ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. het apparaat(P.Het apparaat beheren Initialiseer instellingen 258A-053 U kunt de volgende instellingen herstellen (initialiseren): Menu Initialiseren(P. 293) Sleutel en certificaat initialiseren(P. 293) Alle gegevens/instellingen initialiseren(P. 294) Menu Initialiseren U kunt de instellingen van het apparaat herstellen ( Overzicht van menuopties(P. 296) ). Afhankelijk van welke instellingen u selecteert, zult u misschien na het initialiseren het apparaat opnieuw moeten starten.
Het apparaat beheren Alle gegevens/instellingen initialiseren Dit maakt herstel van alle data en apparaatinstellingen, zoals logboeken, naar de standaard fabriekswaarden mogelijk. Dit verhindert dat gevoelige data weglekt bij het vervangen of afvoeren van het apparaat. Als de initialisatieprocedure is voltooid, start het apparaat automatisch opnieuw op. ● Voorafgaand aan het initialiseren, moet u controleren dat er geen documenten worden verwerkt, of wachten op verwerking.
Overzicht van menuopties Overzicht van menuopties Overzicht van menuopties ....................................................................................................................... 296 .................................................................................................................................................... 297 ..........................................................................................................................
Overzicht van menuopties Overzicht van menuopties 258A-054 U kunt het apparaat aanpassen volgens de omgeving en vereisten, door de in dit hoofdstuk beschreven instellingen te configureren. Om de configuratie te starten, selecteert u
op het scherm Start ( Het scherm Start(P. 107) ). Dit gedeelte beschrijft wat ieder item in het instelmenu kan configureren. (P. 297) Dit gedeelte beschrijft het scherm en netwerkinstellingen. (P.Overzicht van menuopties 258A-055 Item (P. 298) Beschrijving Dit gedeelte beschrijft de instellingen voor het bekijken van het scherm. (P. 302) Dit gedeelte beschrijft de USB-toetsenbordinstellingen. (P. 303) Dit gedeelte beschrijft de timer- en energie-instellingen. (P. 310) Dit gedeelte beschrijft de netwerkinstellingen. (P.
Overzicht van menuopties 258A-056 Alle instellingen voor het bekijken van het scherm verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 298) /(P. 298) (P. 298) (P. 299) (P. 300) /(P.
Overzicht van menuopties <日本語>/ / / / / / / / / / / / <Čeština>/ / <Русский>/ / <Ελληνικά>/ / / / / <Български>/ / / <中文(
Overzicht van menuopties Selecteer een taal Selecteer de maateenheid. Selecteer of /
Overzicht van menuopties
in Voer het tonerniveau in in Selecteer Model zwart-wit LCD Voer het tonerniveau in 301 Overzicht van menuopties 258A-057 Geef de indeling op van een USB-toetsenbord als dat op het apparaat is aangesloten. De standaardinstelling wordt aangegeven met een dolksymbool ( ).
Overzicht van menuopties 258A-058 Alle instellingen voor de tijdschakeling en energie verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 303) (P. 304) (P. 304) (P. 305) (P. 305) (P. 306) (P. 306) (P.
Overzicht van menuopties Geef de standaard datum en tijd op van de regio waar het apparaat is geïnstalleerd. Hiermee stelt u de tijdzone in. Als u de tijdzone wijzigt, worden de waarden bij automatisch aangepast. De datum en tijd instellen(P.
Overzicht van menuopties Selecteer de 12- of 24-uurs tijdnotatie. <12 uur (AM/PM)> <24 uur> Selecteer de weergave-instelling Als er gedurende een bepaalde tijd geen toets wordt ingedrukt op het bedieningspaneel, wordt er een zogenaamde automatische reset uitgevoerd en wordt het standaardscherm weergegeven. Geef het interval op waarop automatisch resetten wordt uitgevoerd.
Overzicht van menuopties
Geef de tijd op voor Automatische resettijd ● Het scherm dat wordt weergegeven na een automatische reset kunt u selecteren bij . Geef aan of na een automatische reset het standaardscherm moet worden weergegeven.Overzicht van menuopties
uitschakeltijd> , en stel de automatische uitschakeltijd in Model zwart-wit LCD de automatische uitschakeltijd in Stel Voordat u instelt ● Wanneer de instelling is ingeschakeld, wordt de machine mogelijk automatisch uitgezet zelOverzicht van menuopties (0:00 tot 23:59) De automatische gradatie-instelling (snelle instelling) kan iedere dag op de opgegeven tijd worden verricht. Stel in deze optie de tijd in waarop de snelle instelling automatisch moet plaatsvinden.
Overzicht van menuopties (0:00 tot 23:59) 309
Overzicht van menuopties 258A-059 Alle instellingen voor het netwerk verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 310) (P. 310) (P. 312) (P. 313) (P. 322) /(P. 324) /(P.
Overzicht van menuopties Draadloze LAN-routers die toegang hebben tot het apparaat, worden automatisch geladen en u kunt deze dus selecteren in de lijst. U moet handmatig een netwerksleutel invoeren, zoals een WEP-sleutel of een PSK. De verbinding instellen door een draadloze router te selecteren(P. 33) Selecteer deze optie om een draadloze verbinding te configureren door handmatig een SSID in te voeren.
Overzicht van menuopties *1 Stel in of een directe verbinding moet worden gemaakt. Door deze functie in te schakelen, maakt u directe verbinding met het apparaat mogelijk, zelfs in een omgeving zonder toegangspunten of draadloze LAN-router. Direct verbinden (toegangspuntmodus)(P. 201)
Overzicht van menuopties Model aanraakscherm
Overzicht van menuopties Selecteer, als DHCP is ingeschakeld, met deze instellingen of u het DNS-serveradres of de domeinnaam wilt ophalen met de optionele functies van DHCP. DNS configureren(P.
Overzicht van menuopties Hiermee kunt u het stateful adres in- of uitschakelen dat wordt verkregen via DHCPv6. Selecteer, als DHCP is ingeschakeld, met deze instellingen of u het DNS-serveradres of de domeinnaam wilt ophalen met de optionele functies van DHCP. DNS configureren(P.
Overzicht van menuopties 0 tot en met 24 tot en met 48 (uur) 0 tot en met 24 tot en met 48 (uur) Hier kunt u instellingen opgeven om DNS-functies te gebruiken zonder DNS-servers.
Overzicht van menuopties *1 : 0.0.0.0 : 0.0.0.0 : 0.0.0.0 *1 *1 *1 Selecteer deze optie om te controleren of de machine via een netwerk is verbonden met een computer. De netwerkverbinding testen(P.
Overzicht van menuopties Geef instellingen op om de machine te gebruiken in een IPv6-netwerk. Hiermee kunt u IPv6 in- of uitschakelen op het apparaat. U kunt met deze optie ook de huidige instellingen bekijken. IPv6-adressen instellen(P.
Overzicht van menuopties Kies deze optie om instellingen op te geven voor DNS (Domain Name System), een mechanisme voor het omzetten van hostnamen in IP-adressen. DNS configureren(P. 65)
Overzicht van menuopties Hiermee kunt u instellingen opgeven voor WINS (Windows Internet Name Service), het protocol dat in een netwerkomgeving met zowel NetBIOS als TCP/IP een NetBIOS-naam levert voor de omzetting naar een IPadres. WINS configureren(P. 71) : 0.0.0.0 LPD in- of uitschakelen.
Overzicht van menuopties Model zwart-wit LCD Hiermee kunt u HTTP in- of uitschakelen. HTTP is een protocol dat vereist is voor communicatie met een computer, bijvoorbeeld wanneer u de UI op afstand gaat gebruiken of gaat afdrukken met WSD of Google Cloudprinter. HTTP-communicatie uitschakelen(P.
Overzicht van menuopties 1 t/m 3702 t/m 65535 1 t/m 80 t/m 65535 1 t/m 427 t/m 65535 1 t/m 110 t/m 65535 1 t/m 161 t/m 65535 Selecteer de maximumgrootte van pakketten die de machine kan verzenden of ontvangen. verzendeenheid wijzigen(P.
Overzicht van menuopties Hiermee kunt u SNMPv3 in- of uitschakelen. Gebruik de UI op afstand om gedetailleerde instellingen op te geven die moeten worden toegepast wanneer SNMPv3 is ingeschakeld.
Overzicht van menuopties
Selecteer of in Start het apparaat opnieuw op Model zwart-wit LCD Selecteer of Start het apparaat opnieuw op / Hiermee kunt u de speciale poort in- of uitschakelen.Overzicht van menuopties / Kies deze optie om de wachttijd in te stellen waarna verbinding wordt gemaakt met het netwerk. Selecteer de tijd afhankelijk van de netwerkomgeving. Een wachttijd instellen voor verbinding met een netwerk(P. 64) 0 tot en met 300 (sec.) Selecteer het type Ethernet (10BASE-T / 100BASE-TX / 1000BASE-T) en de communicatiemodus van Ethernet (halfduplex / full-duplex).
Overzicht van menuopties Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten. Op deze manier wordt de communicatie beperkt tot apparaten met bepaalde IPadressen of MAC-adressen.
Overzicht van menuopties
of in of Selecteer Start het apparaat opnieuw op Model zwart-wit LCD of Selecteer of Start het apparaat opnieuw op Selecteer Selecteer deze optie om instellingen in of uit te schakelen voor het filteren van pakketten die zijn verzonden nOverzicht van menuopties / Geef op of u plug-ins voor iW Management Console wilt gebruiken voor het beheren van de gegevens van het apparaat, zoals instellingen. Neem voor gedetailleerde informatie over iW Management Console contact op met de Canon-dealer bij u in de buurt. Instellingen configureren voor communicatie tussen het apparaat en plugins(P.
Overzicht van menuopties 258A-05A Alle instellingen voor de USB verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Geef op of het gebruik van de USB-poort of een USB-geheugenapparaat moet worden in- of uitgeschakeld. Hiermee kunt u de USB-poort in- of uitschakelen waarmee de machine kan worden verbonden met een computer.
Overzicht van menuopties 258A-05C Alle instellingen voor toegang, zoals de schermkleuren omkeren en weergavetijd van meldingen, verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 330) (P. 330) (P. 331) (P. 331) (P. 331) (P.
Overzicht van menuopties * U kunt het contrast (het verschil tussen lichte en donkere gedeelten) van het scherm aanpassen aan de gebruikslocatie van het apparaat. Zeven niveaus Het contrast instellen Als er twee berichten worden weergegeven op het scherm, bepaalt deze optie hoelang elk bericht wordt weergegeven voordat het volgende bericht opnieuw wordt weergegeven. 1 tot en met 2 tot en met 5 (sec.
Overzicht van menuopties
of 332 SelecteerOverzicht van menuopties 258A-05E Alle instellingen voor het genereren van het bevestigingsgeluid van een ingedrukte toets, het geluid dat aangeeft dat een afdrukproces is voltooid, en andere geluiden verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 333) (P. 333) (P. 333) (P. 333) (P.
Overzicht van menuopties Selecteer of een toon wordt gegenereerd als het afdrukken is voltooid. Selecteer of een geluidssignaal moet worden gegeven als de sluimerstand wordt in- of uitgeschakeld.
Overzicht van menuopties 258A-05F Item Beschrijving (P. 336) Dit gedeelte beschrijft hoe u de beeldkwaliteit voor het afdrukken instelt. (P. 350) Dit gedeelte beschrijft het gebruik van de reinigingsfuncties.
Overzicht van menuopties 258A-05H Alle instellingen voor de beeldkwaliteit verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 336) (P. 336) (P. 337) (P. 337) (P.
Overzicht van menuopties / Selecteer of Gebruik deze functie als de afbeelding is vervaagd door kleurverschuiving. corrigeren(P.
Overzicht van menuopties Als de afdrukresultaten op speciale papiersoorten niet naar wens zijn, kunt u de volgende instellingen proberen om de kwaliteit van de afdrukken te verbeteren. Als u afdrukt op de achterzijde van bedrukt papier, ruw papier of enveloppen, kunt u de afdrukresultaten mogelijk verbeteren door de volgende instellingen aan te passen.
Overzicht van menuopties * Model aanraakscherm Selecteer in de papierbron die moet worden ingesteld Model zwart-wit LCD Selecteer de papierbron ● Als
Overzicht van menuopties Selecteer de modus ( ) LBP654Cx / LBP653Cdw ● Deze instelling is geldig voor normaal papier en dun papier. ● Een sterker verbeterend effect instellen kan leiden tot vage afdrukken of lagere afdruksnelheid. LBP613Cdw / LBP611Cn ● geldt voor enveloppen, en , voor enveloppen en dun papier.
Overzicht van menuopties
/ ( ) Afdrukdichtheid kan ongelijk zijn als het apparaat wordt gebruikt in een omgeving met hoge vochtigheidsgraad. In dat geval kunt u het probleem mogelijk verhelpen door dit item in te stellen op .Overzicht van menuopties
verwerking> ( selecteert, wordt de toner misschien niet voldoende bevestigd, hetgeen leidt tot vage afdrukken. Als continu afdrukken steeds 'spookbeelden' laat zien, kan het probleem misschien worden opgelost door dit item op te zetten.Overzicht van menuopties 2-z af)>/2-zijdig afdr.)> * Als u na het enkelzijdig afdrukken overstapt op dubbelzijdig afdrukken, kunnen de afgedrukte afbeeldingen flets zijn ten gevolge van condens. In dat geval kunt u het probleem misschien oplossen door dit item op te zetten. 2-z af)>/2-zijdig afdr.
Overzicht van menuopties * Als de voorrand van het papier ongelijkheid in glans vertoont, kan instellen op het probleem misschien oplossen. verwerking> ( selecteert, wordt de toner misschien niet voldoende bevestigd, hetgeen leidt tot vage afdrukken. /
Overzicht van menuopties
verwerking> ( , kunnen afdrukken vaag zijn. / Als de afdrukdichtheid zodanig ongelijk is dat de afdruk op een patroon van waterdruppeltjes lijkt, wordt het probleem misschien opgelost als u dit item instelt op .Overzicht van menuopties / * Als u dubbelzijdig afdrukt, kan de afbeelding onscherp zijn aan de achterzijde van het papier in de achterrand. In dat geval kunt u het probleem oplossen door dit item op te zetten.
Overzicht van menuopties ● Als u instelt op , kan de afdruksnelheid lager zijn. Als er strepen op de afdrukken verschijnen, kan instellen op het probleem misschien oplossen. verwerking> * Toner kan loslaten van de afgedrukte pagina, afhankelijk van het type papier of de omgevingscondities.
Overzicht van menuopties ● Als u instelt op , kan de afdruksnelheid lager zijn. * Als u het apparaat in een omgeving met hoge luchtvochtigheid gebruikt, kunnen afdrukken vaag of gekruld zijn. In dat geval kunt u het probleem mogelijk verhelpen de instelling van dit item te veranderen.
Overzicht van menuopties
/ Selecteer de modus ( ) Geeft de voorkeur aan de afdruksnelheid tijdens het afdrukken. Reduceert bij het afdrukken het tonergebruik van tonercartridges. /Overzicht van menuopties 258A-05J De reinigingsfuncties worden opgesomd en toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 350) (P. 350) (P. 350) (P. 350) Sterretjes (*) ● Instellingen gemarkeerd met een asterix (*) worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties
Controleer het bericht ( ) Selecteer het item ( ) ● Als het condens is verwijderd, gaat het afdrukken misschien niet goed, en kan er leeg papier worden 'geproduceerd'. ● Als u instelt op , moet u het apparaat AAN laten om het effect van condensverwijdering te behouden. ● De instelling voor is niet beschikbaar als is ingesteld op .Overzicht van menuopties 258A-05K Item Beschrijving (P. 353) Dit gedeelte beschrijft de instellingen die voor alle functies gelden. (P. 356) Dit gedeelte beschrijft hoe u printerinstellingen opgeeft. (P. 404) Dit gedeelte beschrijft hoe u instellingen opgeeft voor het ontvangen van I-faxen. (P. 406) Dit gedeelte beschrijft de instellingen voor het afdrukken van opgeslagen bestanden. (P.
Overzicht van menuopties 258A-05L Alle items gerelateerd aan voor iedere functie algemene instellingen verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Sterretjes (*) ● Instellingen gemarkeerd met een asterix (*) worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items. Configureer de papiertoevoerinstellingen.
Overzicht van menuopties * *1 Geef deze instelling op wanneer u een document gaat afdrukken op papier met logo's. Als u bij algemeen gebruik, op papier met logo's gaat afdrukken, moet u voor enkelzijdig of dubbelzijdig afdrukken het papier in de papierbron anders laden.
Overzicht van menuopties ● U kunt het beste selecteren als het niet uitmaakt op welke zijde er wordt afgedrukt. Als u op een bepaalde zijde van het papier wilt afdrukken, hoeft u het papier in de papierbron niet om te draaien, ongeacht of enkelzijdig of dubbelzijdig afdrukken is geselecteerd. ● Als is ingesteld voor een papierbron met papier dat ongeschikt is voor dubbelzijdig afdrukken ( Geschikt papier(P.
Overzicht van menuopties 258A-05R Alle instellingen voor de printer verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 356) (P. 402) Sterretjes (*) ● Instellingen gemarkeerd met "*1" worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties
Selecteer een papierbron Selecteer of Doorgaan met afdrukken, zelfs als het papierformaat dat is opgegeven in het printerstuurprogramma sterk verschilt met het geladen papier. Geeft een foutmelding als het papierformaat dat is opgegeven in het printerstuurprogramma sterk verschilt met het geladen papier.Overzicht van menuopties Stel het standaard papierformaat en -soort in. Het afdrukken vindt plaats op het hier ingestelde papierformaat en -soort als u wilt afdrukken vanaf een besturingssysteem dat geen printerstuurprogramma's ondersteunt, of vanaf een mobiel toestel of ander apparaat dat instellingen voor papierformaat en -soort niet ondersteunt. Geschikt papier(P.
Overzicht van menuopties /// 17 niveaus
Overzicht van menuopties Selecteer of ● Deze instelling is alleen beschikbaar als is ingesteld op <600 dpi>. Als dunne lijnen of kleine tekst vervagen, verhoog dan de dichtheid voor een duidelijkere afdruk.
Overzicht van menuopties
gladmaakmodus> Hiermee worden de randen van donker gekleurde tekst of afbeeldingen vloeiend afgedrukt. Deze instelling is geschikt voor de meeste afdruktaken. Hiermee worden de randen van afbeeldingen en interne halftonen vloeiend afgedrukt.Overzicht van menuopties Stelt de hoeveelheid tonertoevoer zodanig in dat de juiste resolutie is gegarandeerd voor tekst en lijnen, en dat de juiste kleurtint is gegarandeerd voor andere types printgegevens. Stelt de hoeveelheid tonertoevoer zodanig in dat de juiste kleurtint is gegarandeerd voor alle types printgegevens. Stelt de hoeveelheid tonertoevoer zodanig in dat de juiste resolutie is gegarandeerd voor alle types printgegevens.
Overzicht van menuopties
Selecteer het doel ● Als u selecteert, kan de afdruksnelheid lager zijn, of kan de beeldkwaliteit veranderen. ● Ook als u instelt op , is vet afdrukken misschien niet mogelijk, afhankelijk van de afdruktoepassing.Overzicht van menuopties
gladmaken> of ● De instellingen van en zijn uitsluitend van kracht als [Geavanceerd effenen] is ingesteld op [Standaardwaarde printer] in het printerstuurprogramma.Overzicht van menuopties
gradaties> of ● [Vloeiende gradatie] in het printerstuurprogramma geldt uitsluitend voor data van grafische afbeeldingen. De hier gerealiseerde instelling geldt voor de vloei-verwerking voor beeldgegevens.Overzicht van menuopties Geef op dat u wilt inbinden over de lange papierzijde. Geef op dat u wilt inbinden over de korte papierzijde. Verschuif de afdrukpositie om de inbindmarge in te stellen die geldt voor de inbindrand zoals opgegeven via . De waarde '00,0' heeft geen effect op de inbindmarge.
Overzicht van menuopties Instelwaarde Lange zijde Korte zijde Bij ieder papiersoort kunt u voor alle afdruktaken de afdrukpositie verschuiven in stappen van 0,5 mm. -50,0 t/m 00,0 t/m +50,0 (mm) combinatie van instellingsrichting en afdrukzijde Geef de verschuivingswaarde op ( Selecteer de ) /
Overzicht van menuopties / Het afdrukken stopt als er een bepaalde fout optreedt in de verwerking. Als u dit item echter instelt op , wordt die fout overgeslagen en kan het afdrukken voortgaan. Gewoonlijk moet u dit item instellen op .
Overzicht van menuopties
Selecteer of Geef op welke bewerking moet plaatsvinden als de beeldkwaliteit is afgenomen vanwege te weinig geheugen bij het afdrukken.Overzicht van menuopties
/ Selecteer of De laatste pagina afdrukken in de enkelzijdige modus. Ook de laatste pagina afdrukken in de dubbelzijdige modus.Overzicht van menuopties Geef op of het afdrukken moet worden geannuleerd, als het papierformaat dat is opgegeven in het printerstuurprogramma sterk verschilt met het geladen papier. contr.
Overzicht van menuopties
Selecteer of ● Deze instelling is alleen beschikbaar als is ingesteld op <600 dpi>. *1 Selecteer de reproductiemethode met halftonen als is ingesteld op . U kunt dit onderdeel instellen voor ieder beeldtype dat zich binnen één document bevindt.Overzicht van menuopties Produceert een afdruk met vloeiende gradatie of vloeiende randen. Is geschikt voor het afdrukken van figuren of afbeeldingen die gradatiegebieden bevatten. Geef de verwerkingsmethode op voor het corrigeren van de kleur.
Overzicht van menuopties
II> Selecteer het type afbeelding of Geef op of lege pagina's niet moeten worden uitgevoerd. II> of *1 Kies deze optie om instellingen op te geven voor PCL-afdrukken, zoals paginalay-out en afdrukkwaliteit.Overzicht van menuopties Geef het lettertype op dat u wilt gebruiken door het bijbehorende lettertype-ID-nummer. U kunt vanaf het bedieningspaneel een lijst afdrukken met voorbeelden van de beschikbare PCL-lettertypen. PCLlettertypelijst(P.
Overzicht van menuopties
op ( Geef het aantal lijnen ) Selecteer hier de tekencode (tekenset) die het meest geschikt is voor de computer die u gebruikt om afdrukgegevens te verzenden. De opgegeven instelling wordt genegeerd als de tekencode wordt bepaald door het lettertype dat is opgegeven bij .Overzicht van menuopties Selecteer de tekencode Kies deze optie om aan te geven of u een aangepast papierformaat wilt instellen. Selecteer om de afmetingen van het papier op te geven bij en .
Overzicht van menuopties
dimensie> Geef de afmeting op ( *1 Geef hier de verticale afmeting (lange kant) van het aangepaste papier op.Overzicht van menuopties
afdrukbreedte vergroten> of U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. Produceert een fijnere afdruk dan met .Overzicht van menuopties Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen. Instelwaarde Produceert een afdruk met vloeiende gradatie of vloeiende randen. Geschikt voor het afdrukken van tekens en fijne lijnen. Produceert een afdruk met vloeiende gradatie of vloeiende randen.
Overzicht van menuopties Verwerkt zodanig dat de kleurtint dieper en levendiger is dan . Configureert een instelling zodanig dat zwarte of grijze gegevens met kleurinformatie die bepaalt dat R=G=B is, worden afgedrukt met uitsluitend zwarte (K) toner. Als is geselecteerd, wordt data afgedrukt met behulp van de toner van vier kleuren: CMYK. U kunt dit onderdeel instellen voor alle beeldtypen binnen één document.
Overzicht van menuopties *1 Geeft de AEC (Alternatie Escape Code) op die moet worden gebruikt voor opdrachten voor streepjescodes wanneer de host-computer de standaard Escapecode niet ondersteunt. <~> <"> <#> <$> <\> > <{> <}> <|> Selecteer een escapecode ● Deze instelling is alleen beschikbaar als is ingeschakeld.
Overzicht van menuopties Configureert een instelling zodanig dat zwarte tekst waarvan de kleurinformatie 'R=G=B=0%,' 'C=M=Y=100%,' of 'C=M=Y=0% / K=100%' wordt afgedrukt met uitsluitend K (zwart) toner. Als is geselecteerd, wordt tekst afgedrukt op basis van de instelling .
Overzicht van menuopties Selecteer het profiel Stelt de beeldkwaliteit in op de industrienorm voor algemene Windows computerschermen. Als het scherm sRGB ondersteunt, kunnen gegevens worden afgedrukt in kleurtinten die het kortst bij de schermkleuren liggen.
Overzicht van menuopties Een U.S. Web Coated-profiel instellen. Er wordt afgedrukt in kleurtinten die dicht bij de Amerikaanse afdruknorm liggen. Een Euro Standard-profiel instellen. Er wordt afgedrukt in kleurtinten die dicht bij de Europese afdruknorm liggen. Drukt CMYK-data af met behulp van een per apparaat verschillend CMYK kleurmodel zonder het CMYKsimulatieprofiel toe te passen.
Overzicht van menuopties
Selecteer het type afbeelding Selecteer het profiel Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen.Overzicht van menuopties
Selecteer het item Het biedt de kleurtint die geschikt is voor het afdrukken van foto's of bitmap-afbeeldingen. Het biedt de kleurtint die geschikt is voor het afdrukken van kunstwerken of andere afbeeldingen die worden gebruikt voor presentatiematerialen.Overzicht van menuopties gradatie> Selecteer het type afbeelding of Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen.
Overzicht van menuopties overdruk> of ● Overdrukken met behulp van speciale kleuren is niet toegestaan. *1 Geef de afdrukmethode op om kleurendata in zwart-wit af te drukken.
Overzicht van menuopties
Selecteer of Kies deze optie om beelden met een fijne gradatie, zoals beelden van een digitale camera, mooi gemaskeerd af te drukken. Kies deze optie om beelden met kleine tekst of dunne lijnen scherp af te drukken. U kunt instellingen voor PDF-bestanden wijzigen.Overzicht van menuopties Geef op of u meerdere pagina's wilt verkleinen en ze in een zodanige opstelling op één pagina wilt afdrukken dat de eerste pagina zich linksboven bevindt. Bijvoorbeeld: om vier pagina's op één vel af te drukken, selecteert u <4 op 1>.
Overzicht van menuopties
overdruk> of Eerst wordt de zwarte tekst uit de gekleurde achtergrond of figuur 'geschetst', en vervolgens wordt zwarte tekst afgedrukt binnen de contouren. De afdruk kan veel vager zijn dan met de instelling , of de tekst kan 'geschetst' verschijnen.Overzicht van menuopties Stelt de beeldkwaliteit in op de industrienorm voor algemene Windows computerschermen. Als het scherm sRGB ondersteunt, kunnen gegevens worden afgedrukt in kleurtinten die het kortst bij de schermkleuren liggen. tot en met Stelt de helderheid van de afdrukresultaten bij om te verhinderen dat de beeldkwaliteit van de helderste en donkerste delen afneemt. Hoe groter de gammawaarde is, des te donkerder de afgedrukte tekst of afbeelding wordt.
Overzicht van menuopties Selecteer of ● Zelfs als is geselecteerd, worden gegeven afgedrukt met uitsluitend K (zwart) toner, afhankelijk van de instelling van of . *2 Selecteer het juiste profiel voor afdrukdata. U kunt deze optie opgeven voor ieder afbeeldingstype in een document.
Overzicht van menuopties Profielen Past het afdrukken van data zodanig aan dat de afdrukkleuren zo dicht mogelijk bij de beeldscherm-kleuren liggen. Past het afdrukken van data zodanig aan dat de afdrukkleuren zo dicht mogelijk bij foto-kleuren liggen. Past het afdrukken van data zodanig aan dat de afdrukkleuren zo dicht mogelijk bij de beeldscherm-kleuren liggen, en uitsluitend de K (zwart) toner wordt gebruikt voor het reproduceren van zwarte en grijze elementen.Overzicht van menuopties U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. Produceert een fijnere afdruk dan met . Deze optie is geschikt voor het afdrukken van scherpe tekstranden of gegevens met fijne lijnen.
Overzicht van menuopties Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen. Instelwaarde Produceert een afdruk met vloeiende gradatie of vloeiende randen. Geschikt voor het afdrukken van tekens en fijne lijnen. Produceert een afdruk met vloeiende gradatie of vloeiende randen.
Overzicht van menuopties
Selecteer het type grijswaardenconversie Drukt in zwart/wit af met nadruk op kleurverschillen, zodat een vloeiende gradatie wordt verkregen. Drukt zodanig in zwart/wit af dat de afbeelding eruit ziet als een zwart/wit televisieafbeelding (van het NTSCsysteem).Overzicht van menuopties Minimaliseert een kleurvariatie die optreedt als RGB-data wordt omgezet naar CMYK-data. Verwerkt zodanig dat de kleurtint dieper en levendiger is dan . U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. Produceert een fijnere afdruk dan met .
Overzicht van menuopties Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen. Instelwaarde Produceert een afdruk met vloeiende gradatie of vloeiende randen. Geschikt voor het afdrukken van tekens en fijne lijnen. Produceert een afdruk met vloeiende gradatie of vloeiende randen.
Overzicht van menuopties Selecteer het type afbeelding Selecteer het type grijswaardenconversie Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen.
Overzicht van menuopties
Selecteer of Selecteer een paginabeschrijvingstaal (PDL), zodat de machine wordt gedetecteerd als een printer die compatibel is met die taal wanneer de machine via Plug and Play wordt aangesloten op een computer.Overzicht van menuopties Detecteert het apparaat als PS-printer en sluit het aan.
Overzicht van menuopties 258A-05S Alle instellingen voor het ontvangen van I-faxen verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 404) (P. 404) Sterretjes (*) ● Instellingen gemarkeerd met een asterix (*) worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties
zijden> Geef het papierformaat op dat moet worden gebruikt voor afdrukken.Overzicht van menuopties 258A-05U Alle instellingen voor het afdrukken van opgeslagen bestanden verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 406) (P. 415) Sterretjes (*) ● Instellingen gemarkeerd met een asterix (*) worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties < PDF-details instellen> Zeven niveaus <2 op 1> <4 op 1> <6 op 1> <8 op 1> <9 op 1> <16 op 1> *
Overzicht van menuopties *
Overzicht van menuopties /// // 17 niveaus Vijf niveaus <1200 dpi> <600 dpi>
Overzicht van menuopties * * Model zwart-wit LCD 1 tot en met 999 * <2-zijdig afdrukken> *
Overzicht van menuopties * *
Overzicht van menuopties
* * /// 17 niveaus Overzicht van menuopties * * * *
Overzicht van menuopties Geeft een voorbeeldafbeelding weer. Geeft bestandsnamen en datums weer in een lijst. Geef aan of u de bestanden op een USB-geheugenapparaat oplopend of aflopend wilt sorteren op bestandsnaam of datum.
Overzicht van menuopties Geeft voor Model aanraakscherm een bestandsnaam weer van maximaal de eerste 40 tekens. Geeft voor Model zwart-wit LCD een bestandsnaam weer van maximaal de eerste 20 tekens. ● Het aantal tekens hierboven is exclusief de tekens in bestandsextensies, zoals '.jpg'. Schakel de functies van een USB-geheugenapparaat in of uit.
Overzicht van menuopties 258A-05W Geef op of Beveiligde afdruk is in- of uitgeschakeld ( Documenten beveiligd afdrukken(P. 175) ). Standaardinstellingen worden aangegeven met een dolksymbool ( ). 10 tot en met 30 tot en met 240 (min.
Overzicht van menuopties 258A-05X Item Beschrijving (P. 418) U kunt instellingen configureren om gebruikers van het apparaat te beheren. (P. 419) U kunt informatie beheren over de hardware en bewerkingen, maar ook verschillende vereiste data voor het gebruik van de apparaatfuncties. /(P. 422) (P.
Overzicht van menuopties 258A-05Y Alle instellingen voor het gebruikersbeheer van het apparaat verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 418) (P. 418) Geef de id of pincode uitsluitend in voor beheerders die toegangsmachtigingen hebben voor en .
Overzicht van menuopties 258A-060 Alle instellingen voor het beheer van het informatie voor de hardware en bewerkingen, maar ook over beheer van vereiste gegevens bij gebruik van apparaatfuncties verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 419) (P. 419) (P. 420) (P.
Overzicht van menuopties Selecteer een land of regio Geef op of de afdruklogs op de display van het apparaat moeten verschijnen.
Overzicht van menuopties weergeven (RUI/Toner Status)> / Selecteer en voorkom dat een knop wordt weergegeven in de externe UI waarmee tonercartridges kunnen worden gekocht.
Overzicht van menuopties / 258A-061 Alle instellingen voor de software en het systeemopties voor het apparaat, maar ook over Licentie registreren verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 422) (P. 422) (P.
Overzicht van menuopties Model aanraakscherm Selecteer in Selecteer of in Start het apparaat opnieuw op Model zwart-wit LCD Selecteer of Start het apparaat opnieuw op /
Overzicht van menuopties 258A-062 De instellingen voor het benutten van de apparaatinstellingen en voor gegevensinitialisatie verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 424) /(P. 425) (P. 425) (P.
Overzicht van menuopties / Hiermee kunt u Product Extended Survey Program in- of uitschakelen (een programma voor het verzamelen van gebruiksgegevens van de machine). /
Overzicht van menuopties 258A-063 Alle instellingen voor de authenticatiefunctie en versleuteling verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 426) (P. 426) U kunt de beveiliging van de authenticatiefunctie versterken.
Overzicht van menuopties Model aanraakscherm Selecteer in Selecteer of in Start het apparaat opnieuw op Model zwart-wit LCD
Onderhoud Onderhoud Onderhoud ......................................................................................................................................................... 429 Standaardreiniging ........................................................................................................................................... 431 De buitenzijde reinigen ................................................................................................................................
Onderhoud Onderhoud 258A-064 In dit hoofdstuk wordt het onderhoud van het apparaat beschreven, inclusief het reinigen van het apparaat en het instellen van de afdrukkwaliteit. ◼ Standaardreiniging Standaardreiniging(P. 431) ◼ Verbruiksartikelen vervangen De tonercassette vervangen(P. 436) De resterende hoeveelheid verbruiksartikelen controleren(P. 441) Verbruiksartikelen(P.
Onderhoud ◼ Het apparaat instellen en beheren De machine verplaatsen(P. 442) Beeldkwaliteit aanpassen(P. 444) Aantal afdrukken weergeven(P. 449) Rapporten en lijsten afdrukken(P.
Onderhoud Standaardreiniging 258A-065 Maak de machine regelmatig schoon om te voorkomen dat de afdrukkwaliteit afneemt en om de machine veilig en prettig te kunnen gebruiken. Onderdelen die u moet reinigen Behuizing van het apparaat en de ventilatieopeningen De buitenzijde reinigen(P. 432) Interne fixeermodule en transfer-band De fixeereenheid reinigen(P. 433) De transportriem (ITB) schoonmaken(P.
Onderhoud De buitenzijde reinigen 258A-066 Wrijf de behuizing van het apparaat regelmatig schoon, vooral bij de ventilatieopeningen, om het apparaat in goede conditie te houden. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. ● Als u de machine uitschakelt, worden gegevens in de wachtrij verwijderd. 2 Reinig de buitenkant van het apparaat en de ventilatieopeningen.
Onderhoud De fixeereenheid reinigen 258A-067 Als de fixeermodule verontreinigd is. Voer de onderstaande procedure uit om de fixeermodule te reinigen. U kunt de fixeermodule niet reinigen als het apparaat documenten in de wachtrij heeft staan die nog moeten worden afgedrukt. U hebt normaal papier van A4-of Letter-formaat nodig om de fixeermodule te reinigen. Leg het papier in de papierlade of de multifunctionele lade en verricht dan de volgende procedure. Papier laden(P. 124) LBP654Cx / LBP653Cdw(P.
Onderhoud ● Als is voltooid, wordt een leeg vel papier afgegeven. Als het symptoom aanwezig blijft, verricht dan ook . ◼ Fixeereenheid reinigen 1 Selecteer in het scherm Start. 2 Selecteer 3 Selecteer . 4 Controleer of het papier dat is geladen overeenkomt met het formaat en het type op 5 Selecteer . Het scherm Start(P. 107) .
Onderhoud De transportriem (ITB) schoonmaken 258A-068 Er kan zich vuil verzamelen op de transfer-band in de machine, met als gevolg dat de afdrukkwaliteit afneemt. Voer de onderstaande procedure uit om de transfer-band te reinigen. U kunt de transfer-band niet reinigen als de wachtrij van de machine documenten bevat die nog moeten worden afgedrukt. 1 Selecteer
in het scherm Start. 2 Selecteer 3 Selecteer . 4 Selecteer . Het scherm Start(P.Onderhoud De tonercassette vervangen 258A-069 Het apparaat geeft een melding weer wanneer er nog maar weinig toner in de tonercartridge zit. Let op: de afdrukkwaliteit kan verslechteren, als u doorgaat met afdrukken zonder dit op te lossen. Op de display kunt u zien hoeveel toner er nog in de tonercartridges zit ( De resterende hoeveelheid verbruiksartikelen controleren(P. 441) ). Er wordt een bericht weergegeven(P. 436) Als afdrukken van slechte kwaliteit zijn(P.
Onderhoud Dit bericht, dat ook de kleur vermeldt van de desbetreffende tonercartridge(s), geeft aan dat een tonercartridge zo goed als leeg is. Het is raadzaam de aangegeven tonercartridge(s) te vervangen. U kunt doorgaan met afdrukken, maar de afdrukkwaliteit kan dan niet worden gegarandeerd. / Kies deze optie om instructies weer te geven voor het vervangen van een tonercartridge.
Onderhoud 2 Trek de lade met de tonercartridges naar buiten. 3 Trek de bedoelde tonercartridge recht omhoog uit de houder. 4 Haal de nieuwe tonercartridge uit de verpakking. 1 Trek de lip aan het verpakkingsmateriaal op een plat vlak. 2 Trek de tonercartridge eruit.
Onderhoud 5 Schud de tonercartridge 5 of 6 keer (zie onderstaande afbeelding) om de toner binnenin de cartridge gelijkmatig te verdelen. ● Raak het drumoppervlak aan de onderzijde van de tonercassettelade niet aan. 6 Installeer de tonercartridge. ● Elke kleur tonercartridge heeft een eigen sleuf in de cartridgehouder, aangegeven met een kleurenlabel ( ). Plaats de tonercartridge in de juiste sleuf. ● Het ondervlak van de tonercartridge is onbeschermd.
Onderhoud KOPPELINGEN Verbruiksartikelen(P.
Onderhoud De resterende hoeveelheid verbruiksartikelen controleren 258A-06A Met onderstaande procedure kunt u controleren hoeveel toner er nog in de tonercartridges zit. Het is vooral belangrijk dat u controleert of u een nieuwe tonercartridge gereed moet hebben, voordat u met een grote afdruktaak begint.
Onderhoud De machine verplaatsen 258A-06C Het apparaat is zwaar. Volg altijd de onderstaande procedures als u het apparaat gaat verplaatsen, om lichamelijk letsel te voorkomen. Lees ook altijd de veiligheidsvoorschriften voordat u aan de slag gaat. Belangrijke veiligheidsinstructies(P. 2) 1 Schakel het apparaat en de computer uit. ● Als u de machine uitschakelt, worden gegevens in de wachtrij verwijderd.
Onderhoud ● De machine is zwaar ( Hoofdeenheid(P. 528) ). Als u LBP654Cx / LBP653Cdw gebruikt, verplaats de machine dan altijd met twee of meer mensen. ● Til het apparaat op met behulp van de handgrepen. Als u de optionele cassette feeding module gebruikt, laat deze dan op de vloer liggen en verplaats de toevoer nadat u het apparaat hebt verplaatst. LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn 6 Zet het apparaat voorzichtig neer op de nieuwe gebruikslocatie.
Onderhoud Beeldkwaliteit aanpassen 258A-06E Als de afdrukresultaten te wensen overlaten, zoals een lage beeldkwaliteit, slechte reproduceerbaarheid of onjuiste afdrukkleuren, probeert u de onderstaande correcties. ◼ Autom. gradatie-aanp. Als de dichtheid of helderheid van kleuren verschilt in afdrukken en originelen, voert u de optie uit om de kleuren nauwkeuriger te reproduceren. Gradatie aanpassen(P.
Onderhoud Gradatie aanpassen 258A-06F Gradatie verwijst naar de overgang van donker naar licht van de tinten van een kleur. Hoe meer tinten in de gradaties van kleuren die worden afgedrukt, des te natuurlijker de afdrukken. Als de reproduceerbaarheid van kleuren slecht is en de dichtheid en helderheid van afdrukken duidelijk afwijken van de originelen, kunt u een automatische aanpassing of correctie uitvoeren.
Onderhoud Onjuiste afdrukkleuren corrigeren 258A-06H Er kan sprake zijn van onjuiste afdrukkleuren als de positie van kleuren verschuiven wanneer voor het afdrukken van één afbeelding meerdere tonercartridges nodig zijn. Het gevolg is dat afdrukken er vaag uit kunnen zien. Voer de volgende procedure uit om onjuiste afdrukkleuren te corrigeren. Dit type aanpassing wordt soms automatisch uitgevoerd, bijvoorbeeld als er een tonercartridge is vervangen.
Onderhoud De afdrukpositie aanpassen 258A-06J Als het document excentrisch of buiten het afdrukbereik wordt afgedrukt, moet u de afdrukpositie aanpassen. U kunt de afdrukpositie voor iedere papierbron aanpassen: in het bereik -5,0 tot +5,0 mm in stappen van 0,1 mm. De aan te passen richting en afstand controleren Als u de afdrukpositie aanpast, geef dan de richting op met '+' en '-' en de afstand met behulp van 'mm'. Voor /
Onderhoud 6 Stel een aanpassingswaarde in. 7 Druk op ( ). De afdrukpositie aanpassen voor alle afdruktaken ● U kunt in het instellingenmenu van het bedieningspaneel gebruiken om de afdrukposities voor alle afdruktaken aan te passen, ongeacht de papierbron. U kunt de afdrukpositie in stappen van 0,5 mm instellen in het bereik -50,0 mm tot +50,0 mm. (P.
Onderhoud Aantal afdrukken weergeven 258A-06K U kunt afzonderlijke totalen opvragen voor het aantal kleurenpagina's dat is afgedrukt en het aantal pagina's in zwartwit. Het aantal afdrukken omvat afdrukken uit geheugenmedia en de lijst, maar ook afdrukken van gegevens vanaf computers. Model aanraakscherm Controleer het aantal afgedrukte pagina's <113: Totaal (Zwart-wit/klein)> Toont het totaalaantal pagina's dat in zwart-wit is afgedrukt.
Onderhoud Rapporten en lijsten afdrukken 258A-06L U kunt rapporten en lijsten afdrukken om informatie te controleren zoals het totale afdrukvolume voor alle en apparaatinstellingen. Een rapport afdrukken van het totaale afdrukvolume per afdelings-ID(P. 450) Instellijsten afdrukken(P. 450) Rapporten en lijsten afdrukken over de verbruikstatus van het apparaat(P.
Onderhoud Model zwart-wit LCD
Selecteer of Controleer dat papier van het formaat en soort dat op het scherm wordt weergegeven, in het ● De gebruikersdatalijst omvat bepaalde instellingen (zoals Netwerkinstellingen en Beheerinstellingen) niet. Als u alle instellingen wilt controleren, drukt u de lijst met systeembeheerdersdata af.Onderhoud
Controleer dat papier van het formaat en de soort dat op het scherm wordt weergegeven, in het apparaat is geplaatst Statusrapport verbruiksart. Met een rapport kunt u de status controleren van de verbruiksartikelen die in het apparaat zijn geïnstalleerd. Model aanraakscherm Onderhoud
Controleer dat papier van het formaat en soort dat op het scherm wordt weergegeven, in het apparaat is geplaatst, en selecteer Model zwart-wit LCD Controleer dat papier van het formaat en soort dat op het scherm wordt weergegeven, in het apparaat is geplaatst Lograpport cartridge U kunt de gebruikslogboeken van tonercartridges met een rapport controleren.Onderhoud Verbruiksartikelen 258A-06R Hier volgt een richtsnoer voor de geschatte levensduur van de verbruiksartikelen die in dit apparaat worden gebruikt. Schaf verbruiksartikelen aan bij uw plaatselijke, erkende Canon-dealer. Neem voorzorgsmaatregelen voor gezondheid en veiligheid in acht wanneer u verbruiksartikelen opslaat en hanteert. Voor een optimale printkwaliteit worden originele toner, tonercartridges en onderdelen van Canon aanbevolen.
Onderhoud Merkeigen Canon tonercartridge Gemiddelde capaciteit van tonercartridge* Canon Cartridge 046 Black (zwart) 2.200 vel Canon Cartridge 046 Yellow (geel) Canon Cartridge 046 Magenta (Magenta) Canon Cartridge 046 Cyan (cyaan) 2.300 vel Canon Cartridge 046 H Black (zwart) 6.300 vel Canon Cartridge 046 H Yellow (geel) Canon Cartridge 046 H Magenta (Magenta) 5.
Problemen oplossen Problemen oplossen Problemen oplossen ..................................................................................................................................... 457 Veelvoorkomende problemen .......................................................................................................................... 459 Installatie-/instellingenproblemen ...............................................................................................................
Problemen oplossen Problemen oplossen 258A-06S Als er een probleem optreedt, raadpleegt u dit hoofdstuk om oplossingen te zoeken voordat u contact opneemt met Canon. ◼ Veelvoorkomende problemen Dit gedeelte beschrijft hoe u actie onderneemt als u vermoedt dat het apparaat niet goed werkt. problemen(P. 459) Veelvoorkomende ◼ Als u niet goed kunt afdrukken Dit gedeelte beschrijft welke actie u moet ondernemen als het afdrukresultaat niet naar tevredenheid is, of het papier gekreukeld of gekruld is.
Problemen oplossen ◼ Als een probleem niet kan worden opgelost Als een probleem blijft optreden, leest u contactgegevens. Als een probleem niet kan worden opgelost(P.
Problemen oplossen Veelvoorkomende problemen 258A-06U Als er problemen ontstaan tijdens het gebruiken van de machine, controleer dan de tips in dit gedeelte voordat u contact met ons opneemt. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
Problemen oplossen Installatie-/instellingenproblemen 258A-06W Zie ook Veelvoorkomende problemen(P. 459) . Probleem met de draadloos/bedraad LAN verbinding(P. 460) Probleem met de USB-verbinding(P. 463) Probleem met de printserver(P. 463) Probleem met de draadloos/bedraad LAN verbinding Het draadloos LAN en bekabeld LAN kunnen niet tegelijkertijd worden gebruikt. ● Het draadloos LAN en bekabeld LAN kunnen niet tegelijkertijd worden gebruikt.
Problemen oplossen U weet niet zeker welk IP-adres is ingesteld. Netwerkinstellingen weergeven(P. 47) U kunt niet afwisselend de verbindingsmethode bekabeld LAN en draadloos LAN gebruiken. ● Hebt u op het bedieningspaneel van het apparaat ook gekozen voor Bekabeld LAN of Draadloos LAN? Dat is noodzakelijk om het apparaat te laten overschakelen naar uw selectie. Bedraad LAN of Draadloos LAN selecteren(P.
Problemen oplossen Controleer of het apparaat is ingeschakeld. ● Als het apparaat is ingeschakeld, schakelt u het uit en vervolgens weer in. Controleer de plek van de installatie van het apparaat en de draadloze router.
Problemen oplossen Probleem met de USB-verbinding Kan niet communiceren. ● Wissel de USB-kabel. Als u een lange USB-kabel gebruikt, vervang deze dan door een korte. ● Als u een hub gebruikt, sluit het apparaat dan met behulp van een USB-kabel rechtstreeks aan op de computer. Probleem met de printserver U kunt de printserver om op aan te sluiten, niet vinden.
Problemen oplossen Afdrukproblemen 258A-06X Zie ook Veelvoorkomende problemen(P. 459) . Het afdrukresultaat is niet naar tevredenheid. Het papier is gekreukeld of gekruld. Als u niet goed kunt afdrukken(P. 467) U kunt niet afdrukken. ● Kunt u een Windows testpagina afdrukken? Als u een Windows testpagina kunt afdrukken, is er geen probleem met het apparaat of het printerstuurprogramma. Controleer de afdrukinstellingen van uw toepassing. Een testpagina afdrukken in Windows(P.
Problemen oplossen Stuurprogramma´s installeren(P. 81) ● Kunt u afdrukken vanaf andere computers op het netwerk? Als u ook niet kunt afdrukken vanaf andere computers, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. Bedraad LAN-verbinding ● Hebt u de juiste poort geselecteerd? Als er geen poort kan worden gebruikt, maak dan een poort. De printerpoort controleren(P. 557) Printerpoorten configureren(P.
Problemen oplossen Het afdrukken gaat langzaam. * ● Schakel Beveiligd afdrukken uit als u deze functie niet gebruikt. De periode instellen waarna beveiligde documenten worden verwijderd(P. 176) * Als het geheugen bijna vol is, wordt de machine trager, net zoals bij een computer. Er is dus geen sprake van een foutsituatie. U kunt niet afdrukken met Google Cloudprinter. Google Cloudprinter gebruiken(P. 217) Het duurt een tijd voordat het afdrukken start.
Problemen oplossen Als u niet goed kunt afdrukken 258A-06Y Probeer de volgende oplossingen als het afdrukresultaat te wensen overlaat, of als het papier gekreukeld is of omkrult. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canonhelpdesk. ◼ Problemen met de beeldkwaliteit Vlekken aan de rand van afdrukken(P. 469) Vlekken en spetters(P. 472) Er verschijnen strepen / het afdrukken is ongelijk(P. 475) Het afdrukresultaat is niet goed(P.
Problemen oplossen Er verschijnen vlekken(P. 478) Achterzijde van het papier is vlekkerig(P. 479) ◼ Problemen met het printpapier Het papier kreukelt(P. 481) Het papier krult(P. 482) ◼ Problemen met de papiertoevoer Afdrukken zijn scheef(P. 484) Het papier krult om of is gekreukeld(P. 481) Papier is onjuist ingevoerd(P. 484) Papier wordt niet ingevoerd of er worden twee of meer vellen tegelijk ingevoerd(P.
Problemen oplossen Het afdrukresultaat is niet goed 258A-070 Als het apparaat van binnen vies is, kan dit gevolgen hebben voor het afdrukresultaat. Reinig het apparaat zorgvuldig. Standaardreiniging(P. 431) Vlekken aan de rand van afdrukken Gebruikt u geschikt papier? ● Controleer de ondersteunde papiertypes en druk af met geschikt papier. Geef ook de instellingen voor het formaat en type papier goed op. Geschikt papier(P. 531) Papier laden(P. 124) Het type en formaat papier opgeven(P.
Problemen oplossen ● Deze handeling is effectiever als zij ongeveer een uur na het voltooien van de vorige afdruksessie wordt verricht. Er verschijnen vlekken op afdrukken Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 531) Papier laden(P. 124) Verschijnen er vlekken als u het apparaat gebruikt in een omgeving met lage vochtigheid? ● Stel in op . (P.
Problemen oplossen Lege gebieden bevatten zogenaamde nabeelden Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 531) Papier laden(P. 124) Is het tijd om de tonercartridge te vervangen? ● Materialen in de tonercartridge kunnen zijn verslechterd. Vervang de tonercartridge. De tonercassette vervangen(P.
Problemen oplossen Vlekken en spetters Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 531) Papier laden(P. 124) Zijn de tonercartridges opgebruikt? ● Controleer hoeveel toner er nog in de tonercartridges zit en vervang zo nodig de tonercartridges. De tonercassette vervangen(P.
Problemen oplossen ● Als u instelt op , kan de afdruksnelheid lager zijn. Zijn de afdrukken onmiddellijk na het vervangen van de tonercartridge vaag? ● Onmiddellijk nadat tonercartridges zijn vervangen door nieuwe, kunnen de afdrukken vaag zijn. In dat geval kunt u het probleem mogelijk verhelpen door in te stellen op . /(P.
Problemen oplossen ● De instelling voor is niet beschikbaar als is ingesteld op . Een deel van de pagina wordt niet afgedrukt Drukt u gegevens af zonder marges? ● Dit symptoom doet zich voor als een marge is ingesteld op Geen in het printerstuurprogramma. Marges van 5 mm of minder rond de rand van het papier of 10 mm of minder rond de rand van enveloppen vallen buiten het bedrukbare gebied van het apparaat.
Problemen oplossen Er verschijnen strepen / het afdrukken is ongelijk Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 531) Papier laden(P. 124) Hebt u de fixeereenheid gereinigd? ● Reinig de fixeereenheid. De fixeereenheid reinigen(P. 433) Is de tonercartridge bijna leeg? ● Controleer hoeveel toner er nog in de tonercartridges zit en vervang zo nodig de tonercartridges. De tonercassette vervangen(P.
Problemen oplossen ● Als u instelt op , en het apparaat in een omgeving met lage luchtvochtigheid gebruikt, kunnen de afgedrukte afbeeldingen onscherp zijn. Gebruikt u papier dat veel papierstof bevat? (LBP654Cx / LBP653Cdw) ● Bij papier dat veel stof bevat, kan het stof leiden tot een vage of streperige afdruk. In dat geval wordt het probleem misschien opgelost als u instelt op . /(P.
Problemen oplossen ● Als u instelt op , kan de afdrukdichtheid lichter zijn. Er verschijnen witte vlekken Gebruikt u papier dat vocht heeft opgenomen? ● Gebruik nieuw papier dat helemaal droog is. Papier laden(P. 124) Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 531) Papier laden(P. 124) Is de tonercartridge bijna leeg? ● Controleer hoeveel toner er nog in de tonercartridges zit en vervang zo nodig de tonercartridges.
Problemen oplossen Verschijnen er witte plekken in de voorrand van het papier? (LBP613Cdw / LBP611Cn) ● Als bij het afdrukken op dun papier de voorrand van het papier witte vlekken vertoont, kan instellen op het probleem misschien oplossen. (P. 344) ● Als u instelt op , kunnen afdrukken vaag zijn. Is de afdruk misschien zodanig ongelijk dat de afdruk op een patroon van waterdruppeltjes lijkt? ● Als u
Problemen oplossen Hebt u de fixeereenheid gereinigd? ● Reinig de fixeereenheid. De fixeereenheid reinigen(P. 433) ● Als het probleem blijft optreden wanneer u de fixeereenheid reinigt, wordt het probleem misschien opgelost door in te stellen op . /(P. 347) ● Als u instelt op , kan de afdruksnelheid lager zijn.
Problemen oplossen ● Deze handeling is effectiever als zij ongeveer een uur na het voltooien van de vorige afdruksessie wordt verricht. Verschijnen er vlekken tijdens dubbelzijdig afdrukken? (LBP613Cdw / LBP611Cn) ● Als u dubbelzijdig afdrukt, kan de afbeelding onscherp zijn aan de achterzijde van het papier in de achterrand. In dat geval kunt u het probleem oplossen door op te zetten. /(P.
Problemen oplossen Het papier krult om of is gekreukeld 258A-071 Het papier kreukelt Is het papier goed geplaatst? ● Als de stapel papier hoger is dan de markering voor het maximale aantal vellen of schuin in de lade ligt, kunnen er kreukels of vouwen ontstaan. Papier laden(P. 124) Gebruikt u papier dat vochtig is geweest? ● Vervang de stapel door probleemloos papier. Papier laden(P. 124) Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier.
Problemen oplossen ● Als of is opgegeven, kunnen afbeeldingen onscherp worden afgedrukt. Het papier krult Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geef ook de instellingen voor het formaat en type papier goed op. Geschikt papier(P. 531) Papier laden(P. 124) Het type en formaat papier opgeven(P. 143) ● Verander de instelling voor . Het verbeterende effect is sterker met dan met .
Problemen oplossen Gebruikt u het apparaat in een omgeving met hoge vochtigheid? (LBP654Cx / LBP653Cdw) ● Als u selecteert voor , wordt het probleem mogelijk opgelost. (P. 348) ● Als u instelt op , kunnen afdrukken vaag zijn.
Problemen oplossen Papier is onjuist ingevoerd 258A-072 Afdrukken zijn scheef Zijn de papiergeleiders afgesteld op de randen van het papier? ● Als de papiergeleiders te los of te strak zitten, zijn de afdrukken scheef. Papier laden(P. 124) Papier wordt niet ingevoerd of er worden twee of meer vellen tegelijk ingevoerd Is het papier goed geplaatst? ● Waaier de papierstapel goed uit, zodat de vellen niet aan elkaar blijven plakken. ● Controleer of het papier goed is geplaatst. Papier laden(P.
Problemen oplossen Er verschijnt een melding of een nummer dat begint met '#' (een foutcode) 258A-073 Als er een schermbericht op het apparaat verschijnt, of een nummer (foutcode) voorafgegaan door '#', raadpleegt u de volgende gedeeltes voor een oplossing. Maatregelen bij ieder bericht(P. 486) Maatregelen bij iedere foutcode(P.
Problemen oplossen Maatregelen bij ieder bericht 258A-074 Er verschijnt een schermbericht als de bewerking mislukt vanwege een storing tijdens het afdrukken, of vanwege te weinig geheugencapaciteit. In de volgende lijst worden deze foutberichten toegelicht. Er wordt mogelijk een namaak- of niet-Canon-cartridge gebruikt. Hoeveelheid inkt in cartridge kan niet goed worden weergegeven. De tonercartridge die u gebruikt, is misschien niet een origineel Canon-product.
Problemen oplossen Er is handmatig een SSID of netwerksleutel van een draadloze router ingevoerd, maar de invoer is onjuist. ● Controleer de SSID en de netwerksleutel en voer de juiste waarden nogmaals in. De SSID en de netwerksleutel controleren(P. 39) De verbinding instellen door gedetailleerde instellingen op te geven(P. 36) De draadloze router is niet gevonden als gevolg van onjuiste instellingen van het netwerk.
Problemen oplossen Controleer de authenticatie-instellingen. De verificatiemethode die is ingesteld op het apparaat komt niet overeen met de verificatiemethode die is ingesteld op de RADIUS-server. ● Controleer dat op dit apparaat en op de RADIUS-server dezelfde authenticatiemethode is ingesteld, en stel de juiste authenticatiemethode in. IEEE 802.1X-verificatie-instellingen configureren(P. 265) Kleurenafdrukken zijn beperkt. Alleen zwart-witafdrukken zijn beschikbaar.
Problemen oplossen ● Verminder het aantal toestellen (clients) dat op de draadloze LAN-router is aangesloten. Zie voor informatie over het maximale aantal toestellen dat kan worden aangesloten, de instructiehandleiding van de draadloze LAN-router of neem contact op met de fabrikant. Kan geen verbinding maken met het draadloze LAN. Zet de hoofdschakelaar UIT en AAN en configureer de instellingen opnieuw. De verbinding is mislukt vanwege een fout tijdens het instellen van de draadloos LAN verbinding.
Problemen oplossen ● Er wordt namelijk een hoeveelheid toner verbruikt tijdens het reinigen. Vervang de tonercartridge en voer de reinigingsprocedure nogmaals uit. Procedure voor het vervangen van de tonercartridge(P. 437) Kan geen correctie uitvoeren. Er is niet voldoende toner beschikbaar voor het uitvoeren van de correctie. ● Tijdens een correctieprocedure wordt een hoeveelheid toner gebruikt. Vervang de tonercartridge en voer de correctieprocedure nogmaals uit.
Problemen oplossen De verificatiemethode van de machine is ingesteld op , maar die van de draadloze router op “Open systeem”. ● Wijzig de WEP-verificatiemethode in "Gedeelde sleutel" op de draadloze router en maak opnieuw verbinding. Raadpleeg voor meer informatie de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant. Einde gebruiksduur van cyaan cartr. bereikt. De tonercartridge heeft het einde van de gebruiksduur bereikt.
Problemen oplossen ● Controleer of het apparaat een correcte verbinding heeft met een draadloze LAN of bekabelde LAN. Verbinding maken met een draadloos LAN(P. 27) Verbinding maken met een bekabeld LAN(P. 26) ● Het is mogelijk dat een poort die wordt gebruikt voor afdrukken via de cloud wordt geblokkeerd door een firewall of een andere beveiligingsmethode. Controleer op uw computer of de 5222-poort beschikbaar is.
Problemen oplossen ● Laad het juiste papier voor het afdrukken van rapporten of lijsten, en realiseer instellingen voor papierformaat en papiersoort. Papier laden(P. 124) Het type en formaat papier opgeven(P. 143) Geschikt papier(P. 531) Er is geen papier geladen waarop ontvangen documenten kunnen worden afgedrukt. ● Laad het juiste papier om het ontvangen document af te drukken, en realiseer instellingen voor papierformaat en papiersoort. Papier laden(P. 124) Het type en formaat papier opgeven(P.
Problemen oplossen Geheugen vol (Fout overslaan) Het geheugen is vol geraakt met afdrukgegevens die door fouten niet kunnen worden afgedrukt. ● Annuleer het afdrukken van de documenten waarin fouten optraden, of druk de documenten af door te selecteren in het scherm Status afdrukopdracht. Afdrukken annuleren(P. 168) Geheugenmedium is beperkt. De functie om bestanden af te drukken vanaf een USB-geheugentoestel is uitgeschakeld.
Problemen oplossen Geen antwoord van de bestemming. Er kan een LAN-kabel zijn losgeraakt, of er kan iets mis zijn in een schakelaar. ● Controleer de status van de LAN-kabels en schakelaars. Geen respons van de host./Geen respons van host. Het apparaat is niet op de juiste manier verbonden met een netwerk. ● Controleer de instellingen van de machine en het netwerk, en maak opnieuw verbinding. De netwerkomgeving instellen(P. 23) Papier vastgelopen. Er is papier vastgelopen.
Problemen oplossen ● Zorg ervoor dat u een vervangende tonercartridge gereed hebt. Als u dit bericht ziet voordat u een grote taak wilt gaan afdrukken, moet u eerst de tonercartridge vervangen. Verbruiksartikelen(P. 454) Bereid de zwarte cartridge voor. De tonercartridge moet binnenkort vervangen worden. ● Zorg ervoor dat u een vervangende tonercartridge gereed hebt. Als u dit bericht ziet voordat u een grote taak wilt gaan afdrukken, moet u eerst de tonercartridge vervangen. Verbruiksartikelen(P.
Problemen oplossen Afdrukken is beperkt. Afdrukken is uitgeschakeld in Afdelings-ID beheer. ● Meld u aan met een Afdelings-ID waarvoor afdrukken niet is uitgeschakeld. Neem voor een Afdelings-ID en pincode contact op met uw Beheerder. Afdeling-ID beheer configureren(P. 227) Stel de juiste authenticatiegegevens in. De informatie over client-verificatie (sleutel en certificaat, gebruikersnaam en wachtwoord, of CAcertificaat) is niet goed ingesteld.
Problemen oplossen Het certificaat van de authenticatieserver is verlopen. Het server-certificaat dat is verstuurd vanaf de RADIUS-server is niet meer geldig. ● Controleer gedurende welke periode het server-certificaat op de RADIUS-server geldig is. IEEE 802.1X-verificatie-instellingen configureren(P. 265) Het certificaat van de authenticatieserver is onjuist. Er is geen CA-certificaat geregistreerd in de printer dat geschikt is voor het certificaat van de authenticatie-server.
Problemen oplossen ● Maak opnieuw verbinding door een draadloze router te selecteren of door de WEP-verificatiemethode handmatig te wijzigen in . De verbinding instellen door een draadloze router te selecteren(P. 33) De verbinding instellen door gedetailleerde instellingen op te geven(P. 36) ● Wijzig de WEP-verificatiemethode in "Gedeelde sleutel" op de draadloze router en maak opnieuw verbinding.
Problemen oplossen Maatregelen bij iedere foutcode 258A-075 Als er een storing optreedt, bijvoorbeeld als het afdrukken mislukt, u een I-fax niet kunt ontvangen, wordt een corresponderende storingscode van drie cijfers weergegeven op het scherm voor het takenlogboek. Raadpleeg de volgende informatie om voor een foutcode mogelijke oorzaken en oplossingen te vinden. Voor informatie over het scherm voor het takenlogboek, leest u Het scherm (P. 110) .
Problemen oplossen #701 Authenticatie is mislukt omdat er een ongeldige Afdelings-ID of pincode is ingevoerd terwijl de functie Afdelings-ID-beheer is ingeschakeld. ● Voer de juiste afdelings-id en pincode in. Er is geprobeerd de machine te gebruiken zonder een Afdelings-ID in te voeren, terwijl taken met onbekende ID's (waarmee handelingen uitgevoerd kunnen worden zonder Afdelings-ID en pincode) uitgeschakeld zijn in het Afdelings-ID-beheer.
Problemen oplossen #802 De naam van de POP3-server is niet goed ingesteld. ● Stel de naam van de POP3-server goed in. I-Faxen ontvangen om af te drukken(P. 193) #810 Tijdens de ontvangst van een I-Fax heeft de POP3-server een fout geretourneerd. ● Controleer of de POP3-server goed is ingesteld. ● Controleer of de mailserver en het netwerk goed functioneren. Neem voor meer informatie contact op met de netwerkbeheerder.
Problemen oplossen #821 De ontvangen gegevens zijn niet geschikt (er is een TIFF-analysefout opgetreden). ● Neem contact op met de wederpartij en vraag ze de instellingen te controleren en de gegevens opnieuw te verzenden. #822 Een bestand op een USB-geheugenapparaat kan niet worden afgedrukt omdat de indeling van het bestand niet wordt ondersteund. ● Controleer welke bestandsformaten geschikt zijn en sla het bestand opnieuw op. Printerfuncties(P.
Problemen oplossen Het afdrukken is geannuleerd vanaf de computer. ● Als u een bewerking annuleert wanneer de afdrukgegevens vanaf een computer naar het apparaat worden verzonden, wordt deze foutcode weergegeven. Er is echter geen sprake van een foutsituatie. Geef desgewenst een nieuwe afdrukopdracht. Een nog niet afgedrukt beveiligd document is verwijderd. ● Als een beveiligd document niet binnen de ingestelde tijd (standaard 30 minuten) is afgedrukt, wordt het document uit het geheugen verwijderd.
Problemen oplossen ● Ontvang het document eventueel opnieuw.
Problemen oplossen Papierstoringen verhelpen 258A-076 Als het papier is vastgelopen, wordt weergegeven op het scherm. Druk op ( eenvoudige oplossingen weer te geven. Als u de procedures op het scherm niet goed begrijpt, raadpleegt u de volgende gedeeltes om storingen te verhelpen. ) om LBP654Cx / LBP653Cdw Uitvoerlade Papierstoringen in de hoofdeenheid(P. 508) Multifunctionele invoer / papierlade Papierstoringen in de papierlade(P.
Problemen oplossen Als u het vastgelopen papier gaat verwijderen, moet u het apparaat niet uitschakelen ● Als u dat doet, gaan de afdrukgegevens namelijk verloren. Als het papier scheurt ● Zorg dat u alle papierresten verwijdert om te voorkomen dat het apparaat opnieuw vastloopt. Als zich herhaaldelijk papierstoringen voordoen ● Waaier de papierstapel uit en tik de uiteinden op een vlak oppervlak om het papier uit te lijnen voordat u het in het apparaat plaatst.
Problemen oplossen Papierstoringen in de hoofdeenheid 258A-077 Verwijder het vastgelopen papier volgens de procedure die geldt voor de locatie waar een papierstoring optreedt. LBP654Cx / LBP653Cdw Uitvoerlade Papierstoringen in het uitvoergebied(P. 508) Achterzijde Papierstoringen aan de achterzijde(P. 508) LBP613Cdw / LBP611Cn Uitvoerlade / achterzijde Papierstoringen aan de voor- en achterzijde(P.
Problemen oplossen 1 Open de achterklep. 2 Trek het papier voorzichtig uit het apparaat. 3 Til de duplex-eenheid op. 4 Trek het papier voorzichtig uit het apparaat. 5 Sluit de achterklep.
Problemen oplossen Papierstoringen aan de voor- en achterzijde Trek het vastgelopen papier niet hardhandig uit het apparaat. Als het vastgelopen papier niet gemakkelijk kan worden verwijderd, gaat u verder met de volgende stap. 1 Trek het papier voorzichtig uit het apparaat. 2 Open de achterklep. 3 Trek het papier voorzichtig uit het apparaat. 4 Sluit de achterklep.
Problemen oplossen Papierstoringen in de papierlade 258A-078 Verwijder het vastgelopen papier volgens de procedure die geldt voor de locatie waar een papierstoring optreedt. LBP654Cx / LBP653Cdw Multifunctionele lade Papierstoringen in de multifunctionele lade(P. 511) Papierlade Papierstoringen in de papierlade(P. 514) LBP613Cdw / LBP611Cn Sleuf voor handmatige invoer Papierstoringen in de sleuf voor handmatige invoer(P. 513) Papierlade Papierstoringen in de papierlade(P.
Problemen oplossen 2 1 Verwijder het vastgelopen papier uit het apparaat. Trek de papierlade uit. ● Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Druk op de groene knop. ➠ De transportgeleider daalt. 3 3 Trek het papier voorzichtig uit het apparaat. Zet de transportgeleider terug in zijn stand.
Problemen oplossen 4 Plaats de papierlade. ● Als u de papierlade plaatst met ingesteld op , verschijnt een bevestigingsscherm. (P. 421) 5 Selecteer als het schermbericht wordt weergegeven.
Problemen oplossen 4 Breng de transportgeleider voorzichtig recht naar binnen. ● Druk de transportgeleider stevig aan, tot hij weer op zijn plaats klikt. 5 Plaats de papierlade. ● Als u de papierlade plaatst met ingesteld op , verschijnt een bevestigingsscherm. (P. 421) 6 Selecteer als het schermbericht wordt weergegeven.
Problemen oplossen ● Houd de papierlade met twee handen vast en trek deze voorzichtig uit het apparaat. Als u dat niet doet, kan de lade beschadigd raken wanneer u deze laat vallen omdat de lade te snel naar buiten schuift. 2 Trek het papier voorzichtig uit het apparaat. ● Als de optionele cassette feeding module is bevestigd, trekt u het papier op dezelfde manier voorzichtig uit het apparaat. 3 Plaats de papierlade. ● Als u de papierlade plaatst met
Problemen oplossen Als een probleem niet kan worden opgelost 258A-079 Als u door het raadplegen van de informatie in dit hoofdstuk een probleem nog steeds niet kunt oplossen, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. Het is niet toegestaan het apparaat te demonteren of te repareren ● Als u dat wel doet, bestaat de kans dat de garantie vervalt.
Bijlage Bijlage Bijlage ................................................................................................................................................................... 518 Software van derden ......................................................................................................................................... 520 Handige functies ............................................................................................................................................
Bijlage Bijlage 258A-07A Dit hoofdstuk bevat de technische specificaties van dit apparaat, instructies voor het gebruik van de Gebruikershandleiding, disclaimers, auteursrechtinformatie en andere belangrijke informatie voor klanten. ◼ Apparaatspecificaties Raadpleeg het (de) volgende gedeelte(s) als u de specificaties van de hoofdeenheid en optionele apparatuur, netwerkomgeving, afdrukfunctie, enzovoort wilt controleren. Technische specificaties(P.
Bijlage Software van derden(P. 520) Handige functies(P. 521) Basisbewerkingen in Windows(P. 553) Kennisgeving(P.
Bijlage Software van derden 258A-07C Voor informatie over software van derden klikt u op het (de) volgende pictogram(men).
Bijlage Handige functies 258A-07E Dit gedeelte beschrijft tips om de apparaatfuncties per categorie te versterken. U kunt gebruik maken van de functies aan de hand van uw beoogd gebruik en werkomgeving. Milieubesparing levert geld op(P. 522) Efficiënter werken(P. 523) Ongekende mogelijkheden(P.
Bijlage Milieubesparing levert geld op 258A-07F Er zijn veel manieren om papier, toner, stroom en kosten te besparen. Dubbelzijdig afdrukken Slaapstand U kunt het dubbelzijdig afdrukken gebruiken om data uit uw computer, en binnenkomende I-faxdocumenten af te Als u energie en geld wilt besparen, is een zogenaamde slaapstand een onmisbare functie. De stroomtoevoer naar de machine wordt dan uitgeschakeld als er gedurende bepaalde tijd geen activiteit is waargenomen.
Bijlage Efficiënter werken 258A-07H Hier zijn een paar eenvoudige bewerkingen die gecompliceerde taken efficiënter maken. Afbeeldingen rechtstreeks vanaf een USBgeheugenapparaat afdrukken Beheer op afstand met de UI op afstand Steek een USB-geheugenapparaat in het apparaat en u kunt afbeeldingen en documenten direct afdrukken, zonder computer. U kunt zelfs Met de UI op afstand kunt u een heleboel dingen beheren vanaf uw computer, dus zonder dat u naar de machine hoeft te lopen.
Bijlage U kunt gemakkelijk de paginaopmaak en ook de inbindpositie opgeven, overschakelen tussen enkelzijdig en dubbelzijdig afdrukken, enz., alles op intuïtieve wijze in de voorbeeldweergave in het printerstuurprogramma. Met eenvoudig klikken kunt u handig instellingen regelen en tegelijkertijd zien hoe de instellingen worden toegepast. Afdrukken vanaf een computer(P.
Bijlage Ongekende mogelijkheden 258A-07J Er is een scala aan functies voor wat u ook maar wilt doen: thuis, op kantoor, of zelfs onderweg. Met een smartphone/tablet Eenvoudig afdrukken met Google Cloudprinter Wanneer u snel een voorstel wilt afdrukken dat u hebt opgemaakt op een tablet terwijl u onderweg was naar een zakenbestemming, komt Canon PRINT Business goed van pas.
Bijlage Als u een afdrukopdracht verstuurt vanaf uw computer, wordt de opdracht normaal gesproken direct afgedrukt. In het geval van vertrouwelijke documenten is dit misschien niet altijd handig. U kunt dan de functie Beveiligd afdrukken gebruiken. De verstuurde documenten worden dan opgeslagen op de machine en worden pas afgedrukt nadat via het bedieningspaneel het ingestelde wachtwoord is ingevoerd. Laat vertrouwelijke documenten niet zonder toezicht in de opvangbak liggen waar iedereen ze kan zien.
Bijlage Technische specificaties 258A-07K Specificaties van het apparaat kunnen zonder vooraankondiging worden gewijzigd bij verbeteringen van het apparaat of toekomstige vrijgave. ◼ Apparaatspecificaties Hoofdeenheid(P. 528) Geschikt papier(P. 531) ◼ Specificaties van optioneel verkrijgbare apparatuur Cassette Feeding Module-AF(P. 535) ◼ Functionele specificaties Printerfuncties(P. 536) Beheerfuncties(P. 538) ◼ Omgeving om het apparaat te gebruiken Besturingssystemen(P. 540) Netwerkomgeving(P.
Bijlage Hoofdeenheid 258A-07L ● Voor informatie over papierformaat en -type raadpleegt u ' Type Bureaublad Met kleurondersteuning Full-color Resolutie voor het schrijven 600 x 600 dpi Geschikt papier Papierformaten Geschikt papier(P. 531) '.
Bijlage Afdruksnelheid *4 LBP654Cx / LBP653Cdw: (Normaal A4, 100%) ● Volledige kleuren: 27 vellen per minuut ● Zwart/wit:: 27 vellen per minuut LBP613Cdw / LBP611Cn: ● Volledige kleuren: 18 vellen per minuut ● Zwart/wit:: 18 vellen per minuut Systeem/capaciteit papierinvoer *5 LBP654Cx / LBP653Cdw: Papierlade 250 vel (80 g/m²) / 250 vel (64 g/m²) x 1 Multifunctionele lade 50 vel (80 g/m²) / 50 vel (64 g/m²) x 1 LBP613Cdw / LBP611Cn: Papierlade 150 vel (80 g/m²) / 150 vel (64 g/m²) x 1 Multifunctionele l
Bijlage Met de netvoeding uitgeschakeld 0,3 W of minder Afmetingen (B x L x H) LBP654Cx: 476 x 469 x 379 mm LBP653Cdw: 437 x 469 x 313 mm LBP613Cdw / LBP611Cn: 430 x 418 x 274 mm Gewicht LBP654Cx: Circa 21,0 kg (inclusief tonercartridges) LBP653Cdw: Circa 20,5 kg (inclusief tonercartridges) LBP613Cdw / LBP611Cn: Circa 15,5 kg (inclusief tonercartridges) Benodigde installatieruimte *6 LBP654Cx: (B x L) 476 x 1.112 mm LBP653Cdw: 437 x 1.112 mm LBP613Cdw / LBP611Cn: 430 x 1.
Bijlage Geschikt papier 258A-07R De volgende tabel toont de papiertypes die bij dit apparaat kunnen worden gebruikt.
Bijlage Papierlade *1 Multifunctionele invoer Automatisch dubbelzijdig afdrukken *2 Papierformaten Envelop Monarch *5 *6 Envelop C5 *6 Envelop DL *6 Aangepast papierformaat *1Inclusief *7 *8 *9 de optionele Cassette Feeding Module-AF. *2Automatisch dubbelzijdig afdrukken is beschikbaar zonder dat u papier hoeft te vervangen. *3Hiermee kunt u ontvangen I-Faxdocumenten afdrukken. *4Hiermee kunt u rapporten of lijsten afdrukken. *5Uitsluitend voor LBP613Cdw / LBP611Cn.
Bijlage Papiersoort Dik 2 120 tot en met 128 g/m² Dik 3 129 tot en met 163 g/m² Gerecycled 1 *3*4 60 tot en met 70 g/m² Gerecycled 2 *3*4 71 tot en met 82 g/m² Kleur *3*4 71 tot en met 82 g/m² Gecoat 1 100 tot en met 120 g/m² Gecoat 2 121 tot en met 150 g/m² Gecoat 3 151 tot en met 200 g/m² Papierlade *1 Multifunctionele lade Automatisch dubbelzijdig afdrukken *2 Etiketten Envelop *1Inclusief de optionele Cassette Feeding Module-AF.
Bijlage Papiersoort Gerecycled 1 *2*3 60 tot en met 70 g/m² Gerecycled 2 *2*3 71 tot en met 82 g/m² Kleur *2*3 71 tot en met 82 g/m² Gecoat 1 100 tot en met 120 g/m² Gecoat 2 121 tot en met 150 g/m² Gecoat 3 151 tot en met 200 g/m² Papierlade Sleuf voor handmatige invoer Automatisch dubbelzijdig afdrukken *1 *4 Etiketten Envelop *4 *1Automatisch dubbelzijdig afdrukken is beschikbaar zonder dat u papier hoeft te vervangen. *2Hiermee kunt u ontvangen I-Faxdocumenten afdrukken.
Bijlage Cassette Feeding Module-AF 258A-07S Papierformaten ● Max: 215,9 x 355,6 mm ● Min: 100 x 148 mm Papiergewicht 52 tot en met 163 g/m²*1 Capaciteit papierladen *2 550 vel (80 g/m²) / 640 vel (64 g/m²) x 1 Afmetingen 437 x 469 x 136 mm (B x L x H) Gewicht Circa 8,5 kg *1Het maximale papiergewicht voor gecoat papier is 200 g/m². *2Kan variëren, afhankelijk van de installatieomgeving en het gebruikte papier.
Bijlage Printerfuncties 258A-07U ◼ UFR II-printerfunctie Type Intern Afdrukformaat Geschikt papier(P. 531) Afdruksnelheid Hoofdeenheid(P. 528) Resolutie Dataverwerking 1200 dpi x 1200 dpi, 600 dpi x 600 dpi Paginabeschrijvingstaal (PDL) UFR II Protocol ondersteund Netwerkomgeving(P. 541) Residente lettertypes Geen Interface USB USB 2.0 Hi-Speed Bedraad LAN 10Base-T, 100Base-TX, 1000Base-T Draadloos LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.
Bijlage Residente lettertypes PCL lettertypes LBP654Cx 93 Roman, 10 Bitmap lettertypes, 2 OCR lettertypes LBP653Cdw / LBP613Cdw 45 Roman, 10 Bitmap lettertypes PS lettertypes 136 Roman Interface USB USB 2.0 Hi-Speed Bedraad LAN 10Base-T, 100Base-TX, 1000Base-T Draadloos LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.11n ◼ Functie Geheugenmedia afdrukken Afdrukbare bestandsindelingen ● JPEG (DCF/Exif 2.21 of eerder/JFIF) ● TIFF (JPEG-/MH-/MR-/MMR-compressie) ● PDF (versie 1.
Bijlage Beheerfuncties 258A-07W ◼ Firewallinstellingen ● U kunt maximaal 16 IP-adressen (of bereiken van IP-adressen) opgeven voor zowel IPv4 als IPv6. ● De hier beschreven pakketfilters besturen de communicatie over TCP, UDP en ICMP. ● U kunt maximaal 32 MAC-adressen opgeven. ◼ IPSec ● IPSec op de machine werkt conform RFC2401, RFC2402, RFC2406 en RFC4305.
Bijlage ◼ Registratie van sleutels en certificaten ● Een certificaat en sleutel die zijn gegenereerd met de machine volgens X.509v3. Als u een sleutel of een CAcertificaat installeert vanaf een computer, zorg er dan voor dat het onderdeel voldoet aan deze vereisten: ● Sleutel: PKCS#12*1 Indeling ● CA-certificaat: X.509v1 of X.509v3, DER (gecodeerd binair), PEM ● Sleutel: '.p12' of '.pfx' Bestandsextensie ● CA-certificaat: '.cer' of '.
Bijlage Besturingssystemen 258A-07X Systeemomgeving voor WSD ● Windows Vista/7/8/10 Systeemvereisten voor de externe UI *1 Windows ● Windows Vista/7/8/10 ● Microsoft Internet Explorer 9.0 of hoger macOS ● Mac OS 10.5.8 of hoger (met uitzondering van de Classic environment) ● Safari 5.0.6 of hoger Ontvangserversoftware voor I-Fax ● Microsoft Exchange Server 2007 ● Microsoft Exchange Server 2010 ● Microsoft Exchange Server 2013 ● Lotus Domino R6.0 of hoger ● Qpopper 2.
Bijlage Netwerkomgeving 258A-07Y ◼ Algemene specificaties Protocol ondersteund Communicatieprotocol TCP/IP (frametype: Ethernet II) Afdrukprotocol ● LPD ● RAW ● WSD ◼ Specificaties bedraad LAN Interface 10Base-T, 100Base-TX, 1000Base-T ◼ Specificaties draadloos LAN Standaard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Transmissieschema IEEE 802.11b (modulatiesysteem: DS-SS) IEEE 802.11g (modulatiesysteem: OFDM-methode) IEEE 802.
Bijlage Opties 258A-080 Als u opties op het apparaat installeert, kunt u meer functies gebruiken. ◼ Weten welke types opties beschikbaar zijn Als optie verkrijgbare apparatuur(P. 543) Systeemopties(P. 544) ◼ Doelgericht zoeken naar optioneel verkrijgbare apparatuur Een papierlade toevoegen Cassette Feeding Module-AF(P.
Bijlage Als optie verkrijgbare apparatuur 258A-081 U kunt de functionaliteit van het apparaat volledig benutten door als optie verkrijgbare hieronder beschreven apparatuur toe te passen. Als optie verkrijgbare apparatuur kunt u aanschaffen bij de leverancier waar u het apparaat hebt aangeschaft of bij de Canon-dealer ter plaatse. Cassette Feeding Module-AF Met behulp van deze cassettetoevoermodule kunt u papier laden dat een ander formaat heeft dan het papier in de standaard papierlade.
Bijlage Systeemopties 258A-082 De prestaties van het apparaat kunnen zelfs worden verbeterd door meer systeemopties te installeren. Barcode Printing Kit(P. 544) Licentieregistratie(P. 544) Barcode Printing Kit Met deze optie kunt u streepjescodes genereren in diverse formaten. Let op: wilt u streepjescodes afdrukken, dan moet PCL zijn ingeschakeld. Voor informatie over het gebruik van de Barcode Printing Kit raadpleegt u de Barcode Printing Guide (Gids voor afdrukken streepjescodes) (PDF-handleiding).
Bijlage 4 Bevestig het bericht dat wordt weergegeven en selecteer . 5 Voer de licentiesleutel in met de numerieke toetsen en selecteer . ➠ De registratie wordt gestart. Wacht totdat de melding wordt weergegeven. ● Als de melding
Bijlage Handleidingen en hun inhoud 258A-083 Het apparaat wordt geleverd met de volgende handleidingen. Raadpleeg deze handleidingen als u iets niet weet. Aan de slag Lees deze handleiding eerst. Er worden enkele basisprocedures beschreven, van het verwijderen van het verpakkingsmateriaal tot het installeren van het apparaat. LBP654Cx / LBP653Cdw LBP613Cdw / LBP611Cn Gebruikershandleiding (Deze handleiding) In deze handleiding worden alle functies van het apparaat beschreven.
Bijlage Gebruikershandleiding gebruiken 258A-084 De Gebruikershandleiding is een handleiding die u via uw computer of mobiel toestel kunt raadplegen. In de handleiding vindt u beschrijvingen van alle apparaatfuncties. U kunt een zoekopdracht ingeven op basis van het beoogde apparaatgebruik of een trefwoord invoeren om snel de pagina te vinden die u zoekt. Het gedeelte beschrijft de schermindeling van de Gebruikershandleiding en hoe u de handleiding moet lezen.
Bijlage Schermindeling van Gebruikershandleiding 258A-085 De Gebruikershandleiding is opgesplitst in verschillende schermen en de inhoud van elk scherm varieert. Bovenste pagina Verschijnt wanneer u Gebruikershandleiding start. / Klik op om ook alle gedeelten onder de hoofdstukken weer te geven. Klik op naar de vorige weergave. om terug te keren / Klik hierop om heen en weer te schakelen tussen de inhoud en de zoekfunctie.
Bijlage Klik hierop om belangrijke informatie weer te geven waarmee u bekend moet zijn voordat u het apparaat gaat gebruiken. Onderwerppagina Deze pagina bevat informatie over het configureren en gebruiken van het apparaat. Navigatie Zie welk hoofdstukonderwerp u momenteel bekijkt. Klik hierop om naar de overeenkomstige pagina te gaan. Klik op "Terug" in uw webbrowser om terug te gaan naar de vorige pagina. / Klik op om de verborgen gedetailleerde beschrijvingen weer te geven.
Bijlage [Voer hier trefwoord(en) in] om de zoekresultaten weer te geven. U kunt zoeken naar Voer (een) trefwoord(en) in en klik op pagina's die alle zoekwoorden bevatten, door de zoekwoorden te scheiden met een spatie. Ook kunt u naar pagina's zoeken die een exacte frase bevatten, door de trefwoorden tussen dubbele aanhalingstekens te plaatsen. Zoekresultaten Geeft de zoekresultaten weer van de pagina's die de opgegeven trefwoorden bevatten.
Bijlage Gebruikershandleiding inzien 258A-086 Dit gedeelte beschrijft de merktekens, knoppen, schermen, en andere items die worden gebruikt in de Gebruikershandleiding. De waarschuwingen worden ook gegeven in de bij het apparaat meegeleverde 'Belangrijke veiligheidsvoorschriften' in het 'Aan de slag'. Raadpleeg ook deze instructies.
Bijlage hun bewerkingen niet gelijk. Bijvoorbeeld: de bewerking om het scherm weer te geven, wordt vertegenwoordigd door 'Druk op ( / / )'. (Model zwart-wit LCD) , , en op het bedieningspaneel worden gebruikt om het doelitem in instellingen te selecteren, maar hun beschrijving is weggelaten in de Gebruikershandleiding. De bewerking voor het selecteren van met behulp van of en het indrukken van is weergegeven zoals hieronder getoond in de Gebruikershandleiding.
Bijlage Basisbewerkingen in Windows 258A-088 De printermap weergeven(P. 553) [Netwerk zoeken] inschakelen(P. 553) Printers weergeven die worden gedeeld op de printserver(P. 554) Een testpagina afdrukken in Windows(P. 555) De bitarchitectuur controleren(P. 556) De printerpoort controleren(P. 557) Bidirectionele communicatie controleren(P. 558) De SSID waarop de computer is aangesloten, bekijken(P. 559) Als u afdrukt vanuit de app Windows Store(P.
Bijlage Klik met de rechter muisknop op de linker onderhoek van het scherm selecteer [Configuratiescherm] [Netwerkstatus en -taken weergeven] [Geavanceerde instellingen voor delen wijzigen] selecteer [Netwerkdetectie inschakelen] onder [Netwerk detecteren]. Windows 8.1/Server 2012 R2 Klik met de rechter muisknop op [Starten] selecteer [Configuratiescherm] [Netwerkstatus en -taken weergeven] [Geavanceerde instellingen voor delen wijzigen] selecteer [Netwerkdetectie inschakelen] onder [Netwerk detecteren].
Bijlage ◼ Een testpagina afdrukken in Windows U kunt controleren of het printerstuurprogramma werkt door een testpagina af te drukken in Windows. 1 2 3 4 Plaats A4-papierformaat in de multifunctionele lade. Papier in de multifunctionele lade plaatsen(P. 133) Open de printermap. De printermap weergeven(P. 553) Klik met de rechtermuisknop op het pictogram van het printerstuurprogramma voor dit apparaat en klik op [Eigenschappen van printer] of [Eigenschappen].
Bijlage ➠ De testpagina wordt afgedrukt. ◼ De bitarchitectuur controleren Weet u niet zeker of op uw computer de 32-bits of 64-bits versie van Windows wordt uitgevoerd, volg dan onderstaande procedure. 1 Open het onderdeel [Configuratiescherm]. Windows Vista/7/Server 2008 [Starten] selecteer [Configuratiescherm] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm Windows 8.1 / Server 2012 R2 Klik met de rechtermuisknop op [Starten] selecteer [Configuratiescherm].
Bijlage ◼ De printerpoort controleren 1 2 3 Open de printermap. De printermap weergeven(P. 553) Klik met de rechtermuisknop op het pictogram van het printerstuurprogramma voor dit apparaat en klik op [Eigenschappen van printer] of [Eigenschappen]. Op het tabblad [Poorten] moet u controleren dat de poort correct is geselecteerd.
Bijlage Als u een netwerkverbinding gebruikt en het IP-adres van het apparaat hebt veranderd ● U moet een nieuwe poort toevoegen. Printerpoorten configureren(P. 54) ◼ Bidirectionele communicatie controleren 1 2 3 Open de printermap. De printermap weergeven(P. 553) Klik met de rechtermuisknop op het pictogram van het printerstuurprogramma voor dit apparaat en klik op [Eigenschappen van printer] of [Eigenschappen].
Bijlage ◼ De SSID waarop de computer is aangesloten, bekijken In het geval de computer is aangesloten op een draadloos LAN netwerk, klikt u op systeemlade om de SSID van de aangesloten draadloos LAN router weer te geven. , , , of in de ◼ Als u afdrukt vanuit de app Windows Store Windows 8/Server 2012 Geef de tekens aan de rechterzijde van het scherm weer dat u gebruikt [Afdrukken]. Tik of klik op [Apparaten] Het stuurprogramma Windows 8.
Bijlage Kennisgeving 258A-089 ◼ Internationaal ENERGY STAR-programma Canon is een ENERGY STAR® partner en heeft in die hoedanigheid bepaalt dat dit product voldoet aan het ENERGY STAR Program voor energiezuinigheid. Het ENERGY STAR programma is een internationaal programma dat zich inzet voor energiebesparing bij het gebruik van computers en andere kantoorapparatuur. Het programma ondersteunt de ontwikkeling en distributie van producten met functies die het energieverbruik effectief verminderen.
Bijlage Uitsluitend bestemd voor de Europese Unie en EER (Noorwegen, IJsland en Liechtenstein) Met deze symbolen wordt aangegeven dat dit product in overeenstemming met de AEEA-richtlijn (2012/19/EU), de richtlijn 2006/66/EG betreffende batterijen en accu's en/of de plaatselijk geldende wetgeving waarin deze richtlijnen zijn geïmplementeerd, niet bij het normale huisvuil mag worden weggegooid.
Bijlage ◼ Handelsmerken Adobe, Acrobat en Reader zijn gedeponeerde handelsmerken van Adobe Systems Incorporated in de Verenigde Staten en / of andere landen. Apple, Bonjour, iPad, iPhone, iPod touch, Mac, macOS, OS X en Safari zijn handelsmerken van Apple Inc. Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Word en Excel zijn handelsmerken of gedeponeerde handelsmerken van Microsoft Corporation in de Verenigde Staten en / of andere landen.
Bijlage Het PDF-logo is een handelsmerk of geregistreerd handelsmerk van Adobe Systems Incorporated in de Verenigde Staten en andere landen. Copyright © 2008 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated.
Bijlage ● Paspoorten ● Postzegels (al dan niet afgestempeld) ● Immigratiebescheiden ● Voor identificatie van gebruikte tekens of insignes ● Belastingzegels (al dan niet afgestempeld) ● Documenten betreffende vervangende of algemene dienstplicht ● Obligaties of andere bewijzen van schuldbekentenis ● Van overheidswege verstrekte cheques of wissels ● Aandelencertificaten ● Rijbewijzen en eigendomspapieren van motorvoertuigen ● Van copyright voorziene werken/kunstwerken zonder toestemming van degene bij wie het
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.
Servicios de terceros Si utiliza servicios de terceros a través del PRODUCTO, el uso de dichos servicios está sujeto a las siguientes condiciones.
El software sujeto a otras condiciones de licencia Consulte Tabla de software y los respectivos términos de licencia que aparecen más abajo para obtener más información y conocer las condiciones de licencia correspondientes.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
Servicios de terceros Si utiliza servicios de terceros a través del PRODUCTO, el uso de dichos servicios está sujeto a las siguientes condiciones.
El software sujeto a otras condiciones de licencia Consulte Tabla de software y los respectivos términos de licencia que aparecen más abajo para obtener más información y conocer las condiciones de licencia correspondientes.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.
Diensten van derden Als u via het PRODUCT diensten van derden gebruikt, moeten deze diensten aan onderstaande voorwaarden voldoen.
Software onderhevig aan overige licentievoorwaarden Raadpleeg de softwaretabel en de bijbehorende licentietermen hieronder voor meer informatie en bijbehorende licentievoorwaarden.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
HarfBuzz 2012-07-30 Copyright (C) 2006 Behdad Esfahbod Copyright (C) 1998-2004 David Turner and Werner Lemberg Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies) Copyright (C) 2004,2007 Red Hat, Inc. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and its documentation for any purpose, provided that the above copyright notice and the following two paragraphs appear in all copies of this software.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Lua Copyright © 1994–2014 Lua.org, PUC-Rio.
LuaSocket LuaSocket 2.0.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.