㻝㻌㻛㻌㻡㻞㻠
Vor dem Start Rechtshinweise Rechtliche Beschränkungen auf den Gebrauch des Produkts und von Bildern Verwenden der e-Anleitung Verwendung der e-Anleitung Betriebsumgebung Installieren der e-Anleitung Deinstallieren der e-Anleitung Bildschirmlayout der e-Anleitung Startseite Themenseite Lageplan Suchmethode Anzeigen der e-Anleitung Haftungsausschluss Copyright Warenzeichen Wichtige Sicherheitsvorschriften Wichtige Sicherheitsvorschriften Installation Stromversorgung Handhabung Wartung und Inspektion Verbrauc
Korrigieren der Farbverzerrungen (Korrektur der Farbverzerrung) Einstellungen für die automatische Bildqualitätsjustage Reinigen des Druckerinneren Reinigen der Fixierwalze des Druckers Reinigen des Transferbands im Drucker Reinigen des Druckergehäuses Achtung (Reinigung) Position der Seriennummer Druckerinstallation Achtung (Druckerinstallation) Überprüfen des mitgelieferten Zubehörs und des Installationsorts Entfernen des Verpackungsmaterials Installieren des Druckers Installation des Treibers Installiere
Anzeigen des Einstellungsdialogs Skalieren der Druckausgabe Layoutdruck (Drucken von N Seiten) Drucken eines Bildes größer als A4 (Posterdruck) Einfügen eines Wasserzeichens in ein zu druckendes Dokument (Drucken mit Wasserzeichen) Hinzufügen, Bearbeiten oder Löschen eines Wasserzeichens Drucken von Rändern, Druckdatum und anderen Angaben Drucken eines Farbdokuments in Schwarzweiß Kombinieren von Daten vor dem Drucken Ändern der Ausgabemethode entsprechend den Druckdaten oder der Anzahl der Kopien Drucken m
Installation auf Clients Installieren über den Druckerordner Installieren über [Windows-Explorer] Verwalten des Druckers Software für die Verwaltung des Druckers Remote UI Starten von Remote UI Achtung (Remote UI) Bildschirmanordnung von Remote UI Anzeigen oder Ändern des Support-Links Ändern der Anzeigensprache von Remote UI MF/LBP Network Setup Tool MF/LBP Network Setup Tool direkt starten Verwalten von Druckaufträgen Überprüfen der Druckereinstellungen Drucken der "User Data List" Festlegen der Informati
Nach dem Drucker kann nicht gesucht werden 439 Sie können den Druckertreiber nicht deinstallieren 441 Starten des Deinstallationsprogramms von der CD-ROM 442 Deinstallieren des USB-Klasse-Treibers 445 Die Druckertreibereinstellungen können nicht geändert werden 448 Profile können nicht ausgewählt oder bearbeitet werden 450 Papierstaus 452 Achtung (Papierstaus) 453 Beseitigen von Papierstaus (Papierkassette) 454 Beseitigen von Papierstaus (Ausgabebereich) 456 Beseitigen von Papierstaus (Innerhalb der rückwär
Die Umschlagklappe des gedruckten Briefumschlags bleibt hängen Mehrere Blätter Papier werden gleichzeitig eingezogen Gedruckte Barcodes können nicht gescannt werden Wenn Sie ein Problem nicht beheben können Anhang Tipps zur bestmöglichen Verwendung des Druckers Grundlagen und andere Informationen zur Vorgehensweise unter Windows Für Benutzer von Windows 8/Server 2012 Geschäftsstellen 㻣㻌㻛㻌㻡㻞㻠 505 506 507 508 509 510 512 523 524
09US-000 Vor dem Start Rechtshinweise Rechtliche Beschränkungen auf den Gebrauch des Produkts und von Bildern Verwenden der e-Anleitung 㻤㻌㻛㻌㻡㻞㻠
09US-001 Rechtshinweise Produktname Gemäß den Sicherheitsbestimmungen muss der Produktname registriert sein. In einigen Regionen, in denen dieses Produkt verkauft wird, können statt des hier verwendeten Namens folgende Namen in Klammern ( ) registriert sein. LBP7100Cn/LBP7110Cw (F163600) EMC-Anforderungen der EU-Richtlinie Dieses Gerät inklusive Ausstattung erfüllt die wesentlichen EMC-Anforderungen der EU-Richtlinie.
Internationales ENERGY STAR-Programm Als ENERGY STAR® -Partner hat Canon Inc. ermittelt, dass dieses Produkt das ENERGY STARProgramm für die Energieeinsparung erfüllt. Das internationale ENERGY STAR-Programm für Bürogeräte ist ein internationales Programm zur Förderung eines energiebewussten Einsatzes von Computern und anderen Bürogeräten. Im Rahmen dieses Programms wird die Entwicklung und Verbreitung von Produkten gefördert, die über Energiesparfunktionen verfügen.
09US-002 Rechtliche Beschränkungen auf den Gebrauch des Produkts und von Bildern Die Verwendung Ihres Produkts zum Scannen, Drucken oder sonstigen Reproduzieren bestimmter Dokumente und der Gebrauch solcher gescannten, gedruckten oder auf irgendeine Art durch Ihr Produkt reproduzierten Bilder kann gesetzlich verboten sein und strafrechtliche und/oder zivilrechtliche Haftung zur Folge haben. Eine unvollständige Liste dieser Dokumente ist unten aufgeführt. Diese Liste soll nur als Richtlinie dienen.
09US-003 Verwenden der e-Anleitung Auch wenn Sie die mitgelieferte CD-ROM nicht zur Hand haben, können Sie die e-Anleitung jederzeit anzeigen, wenn Sie sie zuvor auf Ihrem Computer installiert haben. Zur effizienten Nutzung der e-Anleitung können Sie mehrere Suchprogramme verwenden, um den gewünschten Inhalt zu finden.
09US-004 Verwendung der e-Anleitung Klicken Sie auf die folgenden Links, um die Systemanforderungen für die Verwendung der e-Anleitung und Informationen zur Installation und Deinstallation der e-Anleitung anzuzeigen.
09US-005 Betriebsumgebung Für die Verwendung der e-Anleitung benötigen Sie einen Web-Browser. Es wird garantiert, dass die folgenden WebBrowser verwendet werden können. Internet Explorer 6.0/7.0/8.0/9.0/10.0 Firefox 2.x/3.x/4.x/5.x/6.x/7.x/8.x/9.x/10.x/11.x/13.x/14.x/15.x/16.x/17.x/18.x/19.x HINWEIS Aktivieren der Skript-Funktion und Cookies Aktivieren Sie vor der Verwendung der e-Anleitung die Skript-Funktion und die Cookies für den Web-Browser.
09US-006 Installieren der e-Anleitung Gehen Sie wie folgt vor, um die auf der mitgelieferten CD-ROM enthaltene e-Anleitung auf Ihrem Computer zu installieren. 1 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. 2 Klicken Sie auf [Benutzerdefinierte Installation].
4 Lesen Sie die Lizenzvereinbarung, und klicken Sie dann auf [Ja]. ĺ Die Installation wird gestartet. Warten Sie einen Moment, bis die Installation abgeschlossen ist. (Die Installation der e-Anleitung kann einige Zeit dauern.) 5 Klicken Sie auf [Beenden].
6 Klicken Sie auf [Weiter]. 7 Klicken Sie auf [Ende]. Wenn der folgende Dialog angezeigt wird, können Sie die CD-ROM aus dem Laufwerk nehmen. Anzeigen der e-Anleitung Doppelklicken Sie auf dem Desktop auf die neu erstellte [LBP7100C 7110C e-Anleitung].
Wenn eine Sicherheitswarnung angezeigt wird Gehen Sie folgendermaßen vor. 1. Klicken Sie auf die Informationsleiste, und wählen Sie dann aus dem Kontextmenü [Geblockte Inhalte zulassen] aus. 2. Klicken Sie auf [Ja]. HINWEIS Anzeigen der e-Anleitung direkt von der CD-ROM Sie können die e-Anleitung auch direkt von der CD-ROM anzeigen, ohne sie auf dem von Ihnen verwendeten Computer zu installieren. 1. Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. 2.
09US-007 Deinstallieren der e-Anleitung Das Entfernen der e-Anleitung, um den Computer in denselben Zustand wie vor der Installation der e-Anleitung zurückzusetzen, wird Deinstallation genannt. Gehen Sie folgendermaßen vor, um die e-Anleitung zu deinstallieren. 1 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. 2 Klicken Sie auf [Zusätzliche Software-Programme].
4 Klicken Sie auf [Deinstallieren], um die Deinstallation zu starten. Warten Sie einen Moment, bis die Deinstallation abgeschlossen ist. (Die Deinstallation der e-Anleitung kann einige Zeit dauern.) 5 Klicken Sie auf [Beenden]. 6 Klicken Sie auf [Zurück].
7 Klicken Sie auf [Ende]. Wenn der folgende Dialog angezeigt wird, können Sie die CD-ROM aus dem Laufwerk nehmen.
09US-008 Bildschirmlayout der e-Anleitung In diesem Abschnitt wird das Bildschirmlayout der e-Anleitung beschrieben. Die Seite, die direkt nach dem Start der e-Anleitung angezeigt wird, wird "Startseite" genannt. Die Erläuterung aus der Anleitung wird in diesem Abschnitt "Themenseite" genannt. Die "Übersichtsseite" kann über die [Übersicht] angezeigt werden, die sich in der e-Anleitung oben rechts befindet. Das Suchfenster wird für Suchvorgänge in der e-Anleitung verwendet.
09US-009 Startseite (1) [Umgang mit dem Drucker] In diesem Abschnitt werden u. a. die Wartungsmethoden und Vorsichtsmaßnahmen für den Umgang mit dem Drucker beschrieben. (2) [Drucken] In diesem Abschnitt werden verschiedene Druckmethoden beschrieben, wie einfaches Drucken und erweitertes Drucken mit verschiedenen Druckfunktionen. Darüber hinaus wird hier beschrieben, wie Papier eingelegt wird. (3) [Konfigurieren und Verwalten des Druckers] In diesem Abschnitt wird u. a.
Die Informationen zum Copyright werden angezeigt. (13) [Warenzeichen] Die Informationen zu Warenzeichen werden angezeigt. (14) [Software Dritte] Die Informationen zur Software Dritter werden angezeigt. (15) [Geschäftsstellen] Informationen zu Anfragen zu diesem Drucker werden angezeigt.
09US-00A Themenseite (1) Inhalt der Kapitel Dies ist die Inhaltsliste der Kapitel. Wenn Sie auf ein Thema klicken, wird die Erläuterung auf der Themenseite angezeigt. ] wird ein Menü geöffnet, und durch Klicken auf [ ] wird das Menü geschlossen. Durch Klicken auf [ (2) (3) (4) (5) Sie können auch auf [ Alles einblenden] klicken, um alle Menüs zu erweitern, und auf [ Alles ausblenden], um alle Menüs zu schließen. Themenseite Die Erläuterungen zu den einzelnen Themen werden angezeigt.
09US-00C Lageplan (1) Kategorien Zeigt die Kapitel der e-Anleitung an. Klicken Sie auf ein Thema, um eine detaillierte Liste des Kapitels anzuzeigen. (2) Gesamtinhalt Zeigt alle Kapitel und Abschnitte der e-Anleitung an. Klicken Sie auf ein Thema, um den Inhalt anzuzeigen.
09US-00E Suchmethode (1) Suchen Bei Eingabe einer Zeichenfolge in [Suchen] auf der Startseite oder in das Textfeld [Schlüsselwort] im Suchfenster ] werden die Suchergebnisse angezeigt. und Klicken auf [ In der e-Anleitung steht auch die UND-Suche zur Verfügung, so dass Sie die Suchergebnisse durch Eingabe von zwei oder mehr Suchbegriffen verfeinern können. Geben Sie bei der Eingabe von Suchbegriffen ein Leerzeichen zwischen den Suchbegriffen ein.
09US-00F Anzeigen der e-Anleitung In dieser e-Anleitung verwendete Symbole Im Folgenden finden Sie Erläuterungen zu Warnungen und Vorsichtshinweisen, die in dieser e-Anleitung auf Einschränkungen, Vorsichtshinweise und Anweisungen aufmerksam machen, die zu Ihrer Sicherheit beachtet werden müssen. WARNUNG Wenn Sie eine so gekennzeichnete Warnung nicht beachten, können ernsthafte Verletzungen oder Tod die Folge sein. Bitte beachten Sie diese Warnungen unbedingt, um den sicheren Betrieb zu gewährleisten.
Wenn nicht anders angegeben, gelten die in dieser e-Anleitung verwendeten Abbildungen für LBP7110Cw. Obwohl in den Abbildungen in dieser Anleitung nicht gezeigt, sind in bestimmten Ländern oder Regionen die Bezeichnungen auf den Bedienungsfeldern angegeben. Obwohl das in dieser Anleitung abgebildete Netzkabel mit dem in der folgenden Abbildung identisch ist, kann die Form des Netzkabels je nach Land oder Region abweichen.
09US-00H Haftungsausschluss Änderungen der in diesem Dokument enthaltenen Informationen sind vorbehalten. CANON INC. ÜBERNIMMT KEINERLEI GARANTIE HINSICHTLICH DIESES MATERIALS, OB AUSDRÜCKLICH ODER IMPLIZIERT, AUSSER WIE HIERIN ANGEGEBEN UND OHNE EINSCHRÄNKUNG, FÜR DIE VERMARKTBARKEIT, HANDELSFÄHIGKEIT, TAUGLICHKEIT FÜR EINEN BESTIMMTEN VERWENDUNGSZWECK ODER DEN VERSTOSS GEGEN IRGENDWELCHE PATENTE. CANON INC.
09US-00J Copyright Copyright 2013 von Canon Inc. Alle Rechte vorbehalten. Kein Teil dieses Dokuments darf ohne vorherige schriftliche Genehmigung von Canon Inc. in irgendeiner Form oder durch irgendwelche Mittel, sei es elektronisch oder mechanisch, auch nicht durch Fotokopie und Aufzeichnung, oder durch irgendein Informationsspeicher- oder -wiedergewinnungssystem reproduziert oder übertragen werden.
09US-00K Warenzeichen Canon, das Canon-Logo, LBP und PageComposer sind Warenzeichen von Canon Inc. Adobe, Adobe Acrobat und Adobe Reader sind Warenzeichen von Adobe Systems Incorporated. Microsoft, Windows, Windows Vista, Windows Server und Internet Explorer sind Warenzeichen oder eingetragene Warenzeichen der Microsoft Corporation in den USA und/oder anderen Ländern. Ethernet ist ein Warenzeichen der Xerox Corporation.
09US-00L Wichtige Sicherheitsvorschriften Lesen Sie diese "Wichtige Sicherheitsvorschriften" aufmerksam durch, bevor Sie den Drucker in Betrieb nehmen. Da diese Vorschriften dazu gedacht sind, Verletzungen des Benutzers oder anderer Personen sowie Sachbeschädigungen zu vermeiden, sollten diese Vorschriften grundsätzlich beachtet werden.
09US-00R Wichtige Sicherheitsvorschriften Lesen Sie die folgenden Sicherheitsvorschriften durch, bevor Sie den Drucker in Betrieb nehmen.
09US-00S Installation WARNUNG Installieren Sie den Drucker nicht in der Nähe von Alkohol, Farbverdünnern oder anderen entflammbaren Substanzen. Wenn entflammbare Substanzen in Kontakt mit den elektrischen Teilen im Druckerinneren kommen, kann dies zu einem Brand oder Stromschlag führen. Legen oder stellen Sie nicht die folgenden Gegenstände auf den Drucker.
In Höhenlagen von etwa 3.000 Meter über dem Meeresspiegel oder höher Geräte mit einer Festplatte funktionieren möglicherweise nicht ordnungsgemäß, wenn sie an Orten, die ca. 3.000 Meter oder höher über dem Meeresspiegel liegen, verwendet werden.
09US-00U Stromversorgung WARNUNG Beschädigen oder modifizieren Sie das Netzkabel nicht. Stellen Sie keine schweren Gegenstände auf das Netzkabel, ziehen Sie nicht am Kabel, und biegen Sie es nicht übermäßig, da dies sonst zu einem Brand oder Stromschlag führen kann. Halten Sie das Netzkabel von Wärmequellen fern. Wird dies nicht beachtet, kann der Schutzmantel des Kabels schmelzen, was dann zu einem Brand oder Stromschlag führt.
09US-00W Handhabung WARNUNG Zerlegen oder modifizieren Sie den Drucker nicht. Im Druckerinneren befinden sich Teile, die unter hoher Temperatur und Hochspannung stehen, was zu einem Brand oder Stromschlag führen kann. Elektrische Teile können gefährlich sein, wenn sie nicht ordnungsgemäß verwendet werden. Lassen Sie nicht zu, dass Kinder das Netzkabel oder andere Kabel, interne Zahnräder oder elektrische Teile berühren.
durch eine Abdeckung vollständig verschlossen ist, kann die Laserstrahlung während des normalen Druckerbetriebs nicht nach außen dringen. Lesen Sie die folgenden Bemerkungen und Sicherheitshinweise. Öffnen Sie nur die Abdeckungen, die Sie laut diesem Handbuch öffnen dürfen. Entfernen Sie nicht den an der Lasereinheit im Inneren des Druckers angebrachten Warnaufkleber. Falls der Laserstrahl aus dem Produkt austritt, kann eine Bestrahlung der Augen schwere Sehschäden zur Folge haben.
09US-00X Wartung und Inspektion WARNUNG Wenn Sie den Drucker reinigen möchten, schalten Sie den Drucker und Computer aus, ziehen Sie die Schnittstellenkabel heraus, und ziehen Sie dann den Netzstecker. Wird dies nicht beachtet, kann es zu einem Brand oder Stromschlag kommen. Ziehen Sie den Netzstecker regelmäßig aus der Netzsteckdose heraus, und reinigen Sie mit einem trockenen Tuch die Bereiche um die Metallstifte des Netzsteckers und die Netzsteckdose herum, um den Staub und Schmutz zu entfernen.
Die Fixiereinheit und ihre Umgebung im Drucker können während des Betriebs sehr heiß werden. Wenn gestautes Papier entfernt oder das Druckerinnere überprüft wird, fassen Sie die Fixiereinheit und die Komponenten in ihrer Umgebung nicht an, da dies zu Verbrennungen führen kann. Wenn gestautes Papier entfernt oder das Innere der Einheit überprüft wird, setzen Sie sich nicht über einen längeren Zeitraum der Hitze aus, die von der Fixiereinheit und den Komponenten in ihrer Umgebung abgegeben wird.
09US-00Y Verbrauchsmaterial WARNUNG Entsorgen Sie gebrauchte Tonerpatronen nicht durch Verbrennen. Dies kann zur Entzündung des Toners führen und Verbrennungen oder einen Brand verursachen. Lagern Sie Tonerpatronen oder Papier nicht an Orten, die offenen Flammen ausgesetzt sein können. Dies kann zur Entzündung des Toners oder Papiers führen und Verbrennungen oder einen Brand verursachen.
09US-0A5 Andere Warnhinweise Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden.
09US-010 Informationen zu Verordnungen für Wireless LAN (nur LBP7110Cw) i-SENSYS LBP7110Cw includes approved Wireless LAN Module (Model name: FM48944). Regulatory information Users in the European Union and other European countries R&TTE Declaration of Conformity (Wireless LAN Module) ýHVN\ >&]HFK@ 6SROHþQRVW &$121 ,1& WtPWR SURKODãXMH åH ]DĜt]HQt )0 MH Y VRXODGX VH ]iNODGQtPL SRåDGDYN\ D GDOãtPL SĜtVOXãQêPL XVWDQRYHQtPL VPČUQLFH (6 Dansk [Danish] Undertegnede CANON INC.
Svenska [Swedish] Härmed intygar CANON INC. att denna FM48944 står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
)UDQFLH 7HQWR SURGXNW QHO]H SRXåtYDW PLPR X]DYĜHQp SURVWRU\ Dansk [Danish] * Dette produkt må anvendes i AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.* Bemærkninger for anvendelse af dette produkt. Frankrig: Dette produkt kan ikke anvendes udendøre.
8SR]RUQHQLH N SRXåtYDQLX WRKWR YêURENX )UDQF~]VNR 7HQWR YêURERN VD QHVPLH SRXåtYDĢ YRQNX ǼȜȜȘȞȚțȒ >*UHHN@ ȉȠ ʌĮȡȩȞ ʌȡȠȧȩȞ ȝʌȠȡİȓ ȞĮ ȤȡȘıȚȝȠʌȠȚȘșİȓ ıIJȘȞ $7 %( %* &+ &< &= '( '. (( (6 FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
09US-011 Informationen zu diesem Drucker Technische Daten des Druckers Systemanforderungen für den Druck Bezeichnungen und Abmessungen der einzelnen Teile Bedienfeld Statusfenster des Druckers Überblick über die Dienstprogramme Energiesparmodus Vorsichtshinweise für den Umgang mit dem Drucker Verbrauchsmaterial 㻠㻤㻌㻛㻌㻡㻞㻠
09US-012 Technische Daten des Druckers Technische Daten der Hardware LBP7100Cn Typ Desktop-Seitendrucker Druckverfahren Halbleiter-Laser + Xerographisches System Tonerfixiersystem Bedarfsorientiertes Fixiersystem Druckgeschwindigkeit (Normalpapier (60 bis 90 g/m²), bei A4-Papier und fortlaufendem Druck) Warmlaufzeit (Zeit vom Einschalten bis zur Druckbereitschaft des Druckers) Rückkehrzeit (Zeit vom Schlafmodus bis zur Druckbereitschaft des Druckers) Zeit bis zur Ausgabe des ersten Drucks (beim Dru
bekannt gegebene Geräuschemission) Betriebsumgebung (nur Druckereinheit) Während des Betriebs: ca. 49 dB * Gibt an, dass der Schalldruckpegel an der jeweiligen Bedienerposition unterhalb des absoluten Kriteriums für den Hintergrundgeräuschpegel nach ISO7779 liegt.
Drucksoftware UFR II Die Daten können mit einem Rand von 5,0 mm gedruckt werden. (10 mm bei Briefumschlägen) Bedruckbarer Bereich Nähere Informationen finden Sie im Abschnitt "Bedruckbarer Bereich". Technische Daten für Wireless-LAN (nur LBP7110Cw) Standard IEEE 802.11b/g/n Übertragungsschema DS-SS System/OFDM System Frequenzbereich 2412 bis 2472 MHz Datenübertragungsgeschwindigkeit IEEE 802.11b 1/2/5,5/11 MBps IEEE 802.11g 6/9/12/18/24/36/48/54 MBps IEEE 802.
09US-013 Systemanforderungen für den Druck Der Druckertreiber ist eine Software, die für das Drucken mit diesem Drucker erforderlich ist. Die folgende Systemumgebung ist für die Verwendung des Druckertreibers erforderlich.
09US-014 Bezeichnungen und Abmessungen der einzelnen Teile Teilebezeichnung Frontansicht (1) Ausgabefach (4) Bedienungsfeld (6) Netzschalter (2) Transportgriff (5) Vordere Abdeckung (7) Papierkassette (3) Obere Kassettenabdeckung Rückansicht (1) Lüftungsschlitz (4) LNK-Anzeige (Grün) (7) Typenschild (2) ACT-Anzeige (Gelb) (5) USB-Anschluss (8) Hintere Abdeckung (3) LAN-Anschluss (6) Transportgriff (9) Netzkabelanschluss Innenansicht 㻡㻟㻌㻛㻌㻡㻞㻠
(1) Y (Gelb) Tonerpatronenfach (4) K (Schwarz) Tonerpatronenfach (2) M (Magenta) Tonerpatronenfach (5) Tonerpatronenmagazin (3) C (Cyan) Tonerpatronenfach Papierkassette (1) Papierführung (2) Verriegelungsfreigabehebel Abmessungen der einzelnen Teile 㻡㻠㻌㻛㻌㻡㻞㻠
09US-015 Bedienfeld Im Gegensatz zur obigen Abbildung sind abhängig von Land oder Region die Bezeichnungen der Anzeigen über den entsprechenden Symbolen angegeben. Anzeigen Name (2) Toneranzeige Status (Leuchtet oder blinkt) Ein Fehler tritt bei den Tonerpatronen auf. (Beispielsweise, wenn die Tonerpatronen das Ende ihrer Nutzungsdauer erreicht haben). Abhilfe Beheben Sie das Problem, indem Sie die Meldung im Modul Printer Status Window befolgen.
(Blinkt) Ein Auftrag wird gerade gedruckt oder wartet auf die Druckausgabe. (Leuchtet) (6) Auftragsanzeige Ein Auftrag wird abgebrochen. (Blinkt) (8) Wi-Fi-Anzeige Der Drucker ist über WirelessLAN angeschlossen. (Leuchtet) (nur LBP7110Cw) Das Wireless-LAN ist konfiguriert. (Blinkt) Der Drucker ist eingeschaltet. (Leuchtet) (9) Hauptnetzanzeige Der Drucker wird ausgeschaltet. (Blinkt) (10) Papierstauanzeige Ein Papierstau liegt vor. Entfernen Sie gestautes Papier.
(5) Taste Auftrag abbrechen (7) Wi-Fi-Taste (nur LBP7110Cw) (12) Weiter-Taste Drücken Sie diese Taste, um den Auftrag, der gerade gedruckt wird, oder einen Auftrag, bei dem ein Fehler aufgetreten ist, abzubrechen.*2 Verwenden Sie diese Taste, wenn die Anschlusseinstellungen für Wireless-LAN über das Tastensystem (WPS) konfiguriert werden. Wenn die Weiter-Taste blinkt: Drücken Sie diese Taste, um den Fehler zu überspringen und den Druckvorgang fortzusetzen.
09US-016 Statusfenster des Druckers Das Modul Printer Status Window lässt Sie u. a. den Druckerstatus prüfen, die Dienstprogrammfunktionen ausführen und die Einstellungen für die Druckereinheit festlegen. (1) Menü [Auftrag] Sie können einen Auftrag, der während des Druckens aus einem bestimmten Grund angehalten wurde, abbrechen oder überprüfen. (2) Menü [Optionen] Sie können u. a. Dienstprogrammfunktionen durchführen und Einstellungen für die Druckereinheit vornehmen.
Die Druckerprobleme müssen behoben werden. (6) Symbol Mit dem Drucker kann nicht kommuniziert werden. Es ist ein Serviceaufruf erfolgt. (7) Nachrichtenbereich Zeigt Meldungen zum Druckerstatus an. Zeigt unter der Meldung zusätzliche Informationen an (wie z. B. Situationserläuterungen und Lösungen), wenn ein Fehler oder ein ähnliches Ereignis auftritt. Je nach angezeigter Meldung können Sie "Details Fehlerdiagnose" aufrufen und sich über Details zur Behebung des Fehlers informieren.
Automatisches Anzeigen des Moduls Printer Status Window In den folgenden Fällen wird das Modul Printer Status Window automatisch angezeigt. Wenn beim Drucken ein Fehler auftritt Wenn während des Druckvorgangs Verbrauchsmaterialien bald ersetzt werden müssen Wenn während des Druckvorgangs Verbrauchsmaterialien das Ende ihrer Nutzungsdauer erreicht haben Sie können die Anzeigeeinstellungen im Dialogfeld [Präferenzen (Anwender)] oder [Präferenzen (Administratoren)] des Moduls Printer Status Window ändern.
09US-017 Überblick über die Dienstprogramme Die folgenden Dienstprogramme sind u. a. für die Druckerverwaltung verfügbar. Verwenden von "Remote UI" zur Festlegung verschiedener Einstellungen und Fernsteuerung des Druckers Durch Zugriff auf den Drucker über einen Web-Browser in einem Netzwerk können Sie den Drucker mithilfe eines Computers ferngesteuert verwalten.
09US-018 Energiesparmodus Sie können den Stromverbrauch des Druckers mithilfe des Schlafmodus oder des automatischen Abschaltmodus effizient reduzieren, wenn der Drucker eine bestimmte Zeit lang nicht verwendet wird. Schlafmodus Sie können den Drucker so konfigurieren, dass er zur Reduzierung der Stromverbrauchs in den Standby-Modus schaltet, wenn keine Daten vom Computer gesendet werden oder der Drucker eine bestimmte Zeit lang nicht in Betrieb ist.
09US-019 Schlafmodus Sie können die Einstellungen für den Schlafmodus mithilfe des folgenden Ablaufs festlegen. 1 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 2 Schlafmodus]. 3 Legen Sie die Einstellungen für den Schlafmodus fest. (1) Aktivieren Sie das Kontrollkästchen [Nach festgelegt.Zeit in Schlafmodus vers.].
09US-01A Automatische Abschaltung Sie können die Einstellungen für den automatischen Abschaltmodus mithilfe des folgenden Ablaufs festlegen. 1 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 2 Abschalten]. 3 Legen Sie die Einstellungen für die automatische Abschaltung fest. (1) Aktivieren Sie das Kontrollkästchen [Nach festgelegter Zeit auto.Abschalten].
㻢㻡㻌㻛㻌㻡㻞㻠
09US-01C Vorsichtshinweise für den Umgang mit dem Drucker Dieser Drucker besteht aus verschiedenen elektronischen und optischen Präzisionsbauteilen. Lesen Sie den folgenden Abschnitt, sodass Sie mit dem Drucker korrekt umgehen können. Siehe auch "Wichtige Sicherheitsvorschriften". Legen Sie keine anderen Gegenstände als das Druckpapier auf den Drucker, die Fächer oder die Abdeckungen. Andernfalls kann es zur Beschädigung des Druckers kommen. Vermeiden Sie Erschütterungen des Druckers.
09US-01E Verbrauchsmaterial Das folgende Verbrauchsmaterial wird für diesen Drucker angeboten. Sie können es bei Ihrem autorisierten Canon-Händler vor Ort erwerben. Die folgende Tabelle dient als grobe Richtlinie für das Auswechseln von Verbrauchsmaterial. Abhängig von der Installationsumgebung des Druckers, dem Papierformat oder dem Dokumenttyp müssen Sie das Verbrauchsmaterial jedoch möglicherweise früher als hier angegeben auswechseln.
Tonerpatronen für dieses Gerät werden für mindestens sieben (7) Jahre (oder einen längeren Zeitraum, wie durch anwendbare Gesetze geregelt) nach Einstellung der Produktion dieses Geräts verfügbar sein.
09US-01F Überprüfen des Verbrauchsmaterialstatus Sie können den aktuellen Status des Verbrauchsmaterials im Dialogfeld [Informationen Verbrauchsmaterialien] des Moduls Printer Status Window überprüfen. Nähere Informationen zum Modul Printer Status Window finden Sie im Abschnitt "Statusfenster des Druckers". [Informationen Tonerpatrone] Sie können den Status der Tonerpatronen der jeweiligen Farbe prüfen.
09US-01H Wartung Austausch der Tonerpatrone Auswechseln der Tonerpatrone Lagern der Tonerpatronen Umstellen des Druckers Reinigen des Druckers Einstellen der Farben und Korrigieren der Farbverzerrungen (Kalibrierung/Korrektur der Farbverzerrung) Reinigen des Druckerinneren Reinigen des Druckergehäuses Position der Seriennummer 㻣㻜㻌㻛㻌㻡㻞㻠
09US-01J Austausch der Tonerpatrone Tonerpatronen sind Verbrauchsmaterialien. Wenn die Tonerpatrone das Ende ihrer Nutzungsdauer erreicht, erscheint eine Meldung im Statusfenster des Druckers. Befolgen Sie die Anweisungen in der Meldung. Nähere Informationen zur Ergiebigkeit der Tonerpatronen oder der Ersatztonerpatronen finden Sie im Abschnitt "Verbrauchsmaterial". Meldung Abhilfe Halten Sie Ersatztonerpatronen in angezeigten Farben bereit.
"Auswechseln der Tonerpatrone" Sie können zwar den Druckbetrieb durch Klicken auf [ ] (Fehler beheben) fortsetzen, jedoch kann sich die Druckqualität verschlechtern. * zeigt die Farben der Tonerpatronen an, auf die sich die Meldungen beziehen. (Es können mehrere Farben von Tonerpatronen angezeigt werden.) Beachten Sie bei der Lagerung die im folgenden Abschnitt beschriebenen Punkte.
09US-01K Achtung (Tonerpatrone) Siehe auch "Wichtige Sicherheitsvorschriften" oder "Lagern der Tonerpatronen". WICHTIG Informationen zu Ersatztonerpatronen Für eine optimale Druckqualität wird empfohlen, bei einer Auswechselung der Tonerpatrone die Original-CanonTonerpatrone zu verwenden.
Wenn Sie die Hochspannungskontakte (D) berühren, kann der Drucker beschädigt werden. Vorsichtsmaßnahmen beim Einsetzen von Tonerpatronen Die Position der Tonerpatronen im Drucker wird von der Tonerfarbe bestimmt. Setzen Sie die Tonerpatronen in die Schächte mit den Etiketten ein, deren Farbe mit der der Patrone übereinstimmt. Weitere Vorsichtsmaßnahmen Setzen Sie die Tonerpatronen nicht direktem Sonnenlicht oder starkem Licht aus. Versuchen Sie nicht, die Tonerpatronen zu zerlegen oder zu modifizieren.
09US-01L Auswechseln der Tonerpatrone Sie können den aktuellen Tonerpatronenstatus der jeweiligen Farbe im Dialogfeld [Informationen Verbrauchsmaterialien] des Moduls Printer Status Window überprüfen. "Überprüfen des Verbrauchsmaterialstatus" Lesen Sie vor dem Auswechseln der Tonerpatrone den Abschnitt "Achtung (Tonerpatrone)". 1 Öffnen Sie die vordere Abdeckung. 2 Drücken Sie den Hebel, und ziehen Sie das Tonerpatronenfach heraus.
4 Nehmen Sie die neue Tonerpatrone aus der Schutzhülle. Sie können die Schutzhülle mit Ihren Händen an der Kerbe öffnen. Wenn die Schutzhülle mit einer Schere geöffnet wird, achten Sie darauf, die Tonerpatrone nicht zu beschädigen. Bewahren Sie die Schutzhülle auf. Werfen Sie sie nicht weg. Sie benötigen sie, wenn Sie die Tonerpatrone für die Druckerwartung oder aus anderen Gründen aus dem Drucker nehmen.
möglicherweise nur noch schwer vollständig herausgezogen werden. Wenn das Abdichtband zur Hälfte stoppt, ziehen Sie es vollständig aus der Tonerpatrone heraus. Wenn Reste des Bandes in der Tonerpatrone verbleiben, kann dies zu einer verminderten Druckqualität führen. Entsorgen Sie das entfernte Abdichtband gemäß den örtlichen Bestimmungen. 8 Entfernen Sie die Trommelschutzabdeckung (A). Bewahren Sie die Schutzabdeckung der Trommel auf. Werfen Sie sie nicht weg.
Wenn Sie die vordere Abdeckung nicht schließen können Stellen Sie sicher, dass das Tonerpatronenfach geschlossen ist. Versuchen Sie nicht, die vordere Abdeckung gewaltsam zu schließen, da dies den Drucker beschädigen kann.
09US-01R Lagern der Tonerpatronen Beachten Sie die folgenden Punkte, wenn Sie eine neue Tonerpatrone lagern oder mit einer Tonerpatrone umgehen, die aufgrund einer Druckerwartung oder eines Transports des Druckers aus dem Drucker genommen wurde. WICHTIG Vorsichtsmaßnahmen beim Lagern von Tonerpatronen Für eine sichere und problemlose Nutzung der Tonerpatronen lagern Sie sie an einem Ort, der die folgenden Bedingungen erfüllt.
09US-01S Umstellen des Druckers Wenn der Standort des Druckers verlegt oder der Drucker für eine Wartung transportiert wird, gehen Sie folgendermaßen vor. Nähere Informationen zum Installationsort finden Sie im Abschnitt "Überprüfen des mitgelieferten Zubehörs und des Installationsorts". Siehe auch "Wichtige Sicherheitsvorschriften". 1 Schalten Sie den Drucker aus, und ziehen Sie dann die Kabel aus dem Drucker. * USB-Kabel * (2) Schalten Sie den Computer aus.
3 Tragen Sie die Druckereinheit zum Installationsort. Tragen Sie den Drucker von vorne, indem Sie ihn an den Transportgriffen festhalten. Prüfen Sie das Gewicht des Druckers, und tragen Sie dann den Drucker vorsichtig. "Technische Daten des Druckers" 4 Setzen Sie die Papierkassette in den Drucker ein. 5 Schließen Sie die herausgezogenen Kabel an. * USB-Kabel * Schließen Sie das Kabel an den USB-Anschluss des Druckers an.
09US-01U Reinigen des Druckers Einstellen der Farben und Korrigieren der Farbverzerrungen (Kalibrierung/Korrektur der Farbverzerrung) Führen Sie die Kalibrierung oder die Korrektur der Farbverzerrung durch, sobald sich die Farben geändert haben oder Farbverzerrungen aufgetreten sind und die Daten nicht in den korrekten Farben (den festgelegten Farben) gedruckt werden.
09US-01W Einstellen der Farben und Korrigieren der Farbverzerrungen (Kalibrierung/Korrektur der Farbverzerrung) Farbjustage (Kalibrierung) Führen Sie die Kalibrierung des Druckers durch, sobald sich die Farben geändert haben und die Daten nicht in den korrekten Farben (den festgelegten Farben) gedruckt werden.
09US-01X Farbjustage (Kalibrierung) In diesem Abschnitt wird beschrieben, wie die Kalibrierung manuell durchgeführt werden kann. WICHTIG Vorsichtsmaßnahmen bei Durchführung der Kalibrierung Wenn Sie die Kalibrierung häufig durchführen, kann die Nutzungsdauer der Tonerpatronen beeinträchtigt werden. Führen Sie die Kalibrierung durch, nachdem Sie sich vergewissert haben, dass die Tonerpatronen noch Toner enthalten.
Kalibrierungszeit Es werden ca. 130 Sekunden benötigt.
09US-01Y Korrigieren der Farbverzerrungen (Korrektur der Farbverzerrung) In diesem Abschnitt wird beschrieben, wie die Korrektur der Farbverzerrung manuell durchgeführt werden kann. WICHTIG Vorsichtsmaßnahmen beim Korrigieren der Farbverzerrung Wenn Sie häufig eine Korrektur der Farbverzerrung vornehmen, kann dies die Nutzungsdauer der Tonerpatronen beeinträchtigen. Führen Sie die Korrektur der Farbverzerrung durch, nachdem Sie sich vergewissert haben, dass die Tonerpatronen noch Toner enthalten.
HINWEIS Zeit für die Korrektur der Farbverzerrung Es werden ca. 60 Sekunden benötigt.
09US-020 Einstellungen für die automatische Bildqualitätsjustage Sie können den folgenden Ablauf verwenden, um den Drucker so einzustellen, dass eine Kalibrierung täglich zur bestimmten Zeit automatisch durchgeführt wird oder dass die Kalibrierung bzw. die Korrektur der Farbverzerrung unmittelbar nach dem Einschalten des Druckers erfolgen. 1 Klicken Sie in der Taskleiste auf [ ], und wählen Sie dann einen Druckernamen.
(Die Kalibrierung wird durchgeführt, falls der Drucker vor der festgelegten Zeit ein- und wieder ausgeschaltet wird.) Wenn Sie die Kalibrierung oder die Korrektur der Farbverzerrung unmittelbar nach dem Einschalten des Druckers durchführen Wählen Sie in [Justage Bildqualität bei Startup] die Option [Sofort ausführen (Level 1)] oder [Sofort ausführen (Level 2)]. [Sofort ausführen (Level 1)] Nur die Korrektur der Farbverzerrung wird unmittelbar nach dem Einschalten des Druckers durchgeführt.
09US-021 Reinigen des Druckerinneren Reinigen der Fixierwalze des Druckers Wenn auf den Ausdrucken Verschmierungen zu sehen sind, reinigen Sie die Fixierwalze des Druckers. Reinigen des Transferbands im Drucker Wenn das Transferband des Druckers verschmutzt ist, kann sich die Druckqualität verschlechtern. Reinigen Sie in diesem Fall das Transferband.
09US-022 Reinigen der Fixierwalze des Druckers Für die Reinigung der Fixierwalze wird A4-Papier benötigt. Halten Sie A4-Normalpapier bereit. 1 Legen Sie A4-Normalpapier in die Papierkassette ein. "Einlegen von Papier" 2 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 3 ; = # 4 Klicken Sie auf [OK].
㻥㻞㻌㻛㻌㻡㻞㻠
09US-023 Reinigen des Transferbands im Drucker 1 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 2 ; ? # 3 Klicken Sie auf [OK]. ĺ Die Meldung erscheint im Modul Printer Status Window, und der Drucker beginnt mit der Reinigung des Transferbands. HINWEIS Dauer der Reinigung Es werden ca. 50 Sekunden benötigt. Die Reinigung des Transferbands kann nicht abgebrochen werden.
09US-024 Reinigen des Druckergehäuses Lesen Sie vor dem Reinigen des Druckergehäuses den Abschnitt "Achtung (Reinigung)". 1 Schalten Sie den Drucker aus, und ziehen Sie dann die Kabel aus dem Drucker. * USB-Kabel * (2) Schalten Sie den Computer aus. (3) Ziehen Sie das Kabel aus dem Drucker. LAN-Kabel * (4) Ziehen Sie das Kabel aus dem Drucker. Netzkabel (5) Ziehen Sie den Netzstecker aus der Netzsteckdose. (6) Ziehen Sie das Kabel aus dem Drucker.
4 Wenn der Drucker vollständig trocken ist, schließen Sie die herausgezogenen Kabel an. * USB-Kabel * Schließen Sie das Kabel an den USB-Anschluss des Druckers an. LAN-Kabel * Schließen Sie das Kabel an den LAN-Anschluss des Druckers an. Netzkabel (1) Stecken Sie das Netzkabel in den Netzeingang des Druckers. (2) Stecken Sie den Netzstecker in die Netzsteckdose. Ob das Kabel angeschlossen ist, hängt von der Umgebung ab.
09US-025 Achtung (Reinigung) Siehe auch "Wichtige Sicherheitsvorschriften". WICHTIG Vorsichtsmaßnahmen beim Reinigen des Druckergehäuses Verwenden Sie keine Putzmittel, sondern nur Wasser oder ein mildes, mit Wasser verdünntes Reinigungsmittel, da sich sonst die Kunststoffmaterialien des Druckers verformen oder einreißen können. Wenn Sie ein mildes Reinigungsmittel verwenden, verdünnen Sie es unbedingt mit Wasser.
09US-026 Position der Seriennummer Sie benötigen die Seriennummer für Ihren Anspruch auf den Wartungsservice. Sie finden die Seriennummer an den in den folgenden Abbildungen dargestellten Positionen. Entfernen Sie nicht die Typenschilder, auf denen die Seriennummer angegeben ist.
09US-027 Druckerinstallation Wenn der Drucker installiert wird, führen Sie die folgenden Verfahren durch. Lesen Sie vor der Installation des Druckers den Abschnitt "Achtung (Druckerinstallation)".
09US-028 Achtung (Druckerinstallation) Siehe auch "Wichtige Sicherheitsvorschriften". WICHTIG Schutz des Druckers vor Kondensation Lassen Sie den Drucker vor dem Gebrauch für mindestens zwei Stunden stehen, damit er sich an die Temperatur und Luftfeuchtigkeit der Umgebung anpassen kann, um die Bildung von Kondenswasser im Druckerinneren in den folgenden Fällen zu vermeiden.
Bevor der Drucker eingeschaltet wird, setzen Sie unbedingt die Papierkassette in den Drucker ein. Wenn ein leeres Blatt Papier ausgegeben wird, handelt es sich dabei nicht um einen Fehler. HINWEIS Informationen zu den in diesem Drucker enthaltenen Verbrauchsmaterialien Der Zeitplan für den Austausch der enthaltenen Verbrauchsmaterialien ist wie folgt.
09US-029 Überprüfen des mitgelieferten Zubehörs und des Installationsorts Überprüfen des mitgelieferten Zubehörs Vergewissern Sie sich vor der Installation des Druckers, dass das gesamte mitgelieferte Zubehör in der Packung enthalten ist. Sollte ein Gegenstand fehlen oder beschädigt sein, wenden Sie sich an Ihren autorisierten Canon-Händler vor Ort. HINWEIS Im Lieferumfang dieses Druckers befinden sich zwei CD-ROMs "User Software". Sie können beide CD-ROMs verwenden.
Handbuch Erste Schritte vorliegt. Arabisch, Bulgarisch, Kroatisch, Tschechisch, Estnisch, Griechisch, Ungarisch, Lettisch, Litauisch, Persisch, Portugiesisch, Rumänisch, Slowakisch, Slowenisch, Türkisch, Ukrainisch Um das Handbuch im PDF-Format anzuzeigen, wird Adobe Reader/Adobe Acrobat Reader benötigt. Wenn Adobe Reader/Adobe Acrobat Reader auf Ihrem System nicht installiert ist, laden Sie diese Anwendung von der Website der Adobe Systems Incorporated herunter.
09US-02A Entfernen des Verpackungsmaterials HINWEIS Bewahren Sie die beim Entpacken entfernten Verpackungsmaterialien auf. Beim Kauf des Druckers wird er zusammen mit den Verpackungsmaterialien in einem Karton geliefert; beides ist erforderlich, wenn der Drucker umgestellt oder zum Zwecke der Wartung transportiert werden soll. Informationen zum Verpackungsmaterial Die Form oder Position des Verpackungsmaterials kann geändert und Verpackungsmaterial ohne Ankündigung hinzugefügt oder entfernt werden.
4 Öffnen Sie die vordere Abdeckung. 5 Drücken Sie den Hebel, und ziehen Sie das Tonerpatronenfach heraus. 6 Halten Sie die Tonerpatrone nach unten wie in der Abbildung gezeigt. 7 Entfernen Sie die Lasche, und ziehen Sie dann das Abdichtband heraus (ca. 50 cm).
WICHTIG Vorsichtsmaßnahmen beim Herausziehen des Abdichtbandes Ziehen Sie das Abdichtband in keine andere Richtung als die Pfeilrichtung heraus. Wenn das Band reißt, kann es schwierig werden, das Band vollständig herauszuziehen. Wenn das Abdichtband zur Hälfte stoppt, ziehen Sie es vollständig aus der Tonerpatrone heraus. Wenn Reste des Bandes in der Tonerpatrone verbleiben, kann dies zu einer verminderten Druckqualität führen. Entsorgen Sie das entfernte Abdichtband gemäß den örtlichen Bestimmungen.
Schließen Sie die Abdeckungen und setzen Sie die Papierkassette ein, wenn Sie mit der Überprüfung fertig sind. Installieren Sie nun den Drucker.
09US-02C Installieren des Druckers Tragen des Druckers zum Installationsort 1 Ziehen Sie die Papierkassette aus dem Drucker heraus. 2 Tragen Sie die Druckereinheit zum Installationsort. Tragen Sie den Drucker von vorne, indem Sie ihn an den Transportgriffen festhalten. Prüfen Sie das Gewicht des Druckers, und tragen Sie dann den Drucker vorsichtig. "Technische Daten des Druckers" 3 Setzen Sie die Papierkassette in den Drucker ein. Anschließen des Netzkabels 1 Schließen Sie das Netzkabel an.
HINWEIS Form des mitgelieferten Netzkabels Das Aussehen des mitgelieferten Netzkabels kann von der in der obigen Abbildung abweichen. Führen Sie als nächstes die folgenden Maßnahmen durch. 1 Einlegen von Papier "Einlegen von Papier" 2 Installieren des Druckertreibers "Installieren des Druckertreibers" 3 Registrieren des Papierformats und typs "Registrieren des Papierformats und -typs" 4 Überprüfen des Druckvorgangs Überprüfen Sie die Vorgänge mithilfe des Konfigurationsseitendrucks.
09US-02E Installation des Treibers Installieren des Druckertreibers Deinstallieren des Druckertreibers 㻝㻜㻥㻌㻛㻌㻡㻞㻠
09US-02F Installieren des Druckertreibers Der Druckertreiber ist eine Software, die für das Drucken mit diesem Drucker erforderlich ist. Nähere Informationen zur Systemumgebung, die für die Verwendung des Druckertreibers erforderlich ist, finden Sie im Abschnitt "Systemanforderungen für den Druck". Die Vorgehensweise zur Installation des Druckertreibers hängt von der Systemumgebung ab. Lesen Sie einen der folgenden Abschnitte entsprechend Ihrer Systemumgebung.
Lokale Installation Sie können den Druckertreiber von der mitgelieferten CD-ROM installieren. Die e-Anleitung wird während der "Einfache Installation" ebenfalls installiert. Einfache Installation Download-Installation Sie können den Druckertreiber ohne Verwendung der mitgelieferten CD-ROM installieren, indem Sie den Druckertreiber vom Druckserver herunterladen. Es gibt die folgenden zwei Möglichkeiten, den Druckertreiber herunterzuladen und zu installieren.
09US-02H Einfache Installation 1 Schalten Sie den Computer ein, und melden Sie sich dann unter Windows als Benutzer mit Administratorrechten an. Wenn während der automatischen Plug & Play-Installation ein Dialogfeld erscheint (USB Verbindung) Klicken Sie auf [Abbrechen], schalten Sie den Drucker aus, und installieren Sie den Druckertreiber dann wie hier beschrieben. 2 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein.
Wenn der oben abgebildete Dialog nicht angezeigt wird "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Wenn das Dialogfeld [Automatische Wiedergabe] angezeigt wird Klicken Sie auf [AUTORUN.EXE ausführen]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen]. 4 Klicken Sie auf [Starten]. 5 Lesen Sie die Lizenzvereinbarung, und klicken Sie dann auf [Ja].
6 Geben Sie bei Bedarf die Anschlusseinstellungen des Druckers an. Lesen Sie vor dem Angeben der Einstellungen den Abschnitt "Verbinden des Druckers und Computers". Das Einstellverfahren hängt von Ihrer Umgebung ab. Befolgen Sie die Anweisungen auf dem Bildschirm, um die Einstellungen festzulegen. Wenn Sie während der Verbindungseinstellungen auf ein Problem stoßen Klicken Sie auf [Nützliche Tipps] unten links auf dem Bildschirm und schauen Sie sich den Hilfeinhalt an.
7 Installieren des Druckertreibers nach Festlegung der Druckeranschlusseinstellungen 1. Klicken Sie auf [Liesmich-Datei anzeigen]. 2. Lesen Sie den Inhalt der Liesmich-Datei und schließen Sie dann die Datei. Sie enthält wichtige Informationen und spezielle Informationen, die in der e-Anleitung nicht enthalten sind. 3. Klicken Sie auf [Weiter]. 4. Wählen Sie die Installationsmethode aus.
Wählen Sie [Mit USB-Verbindung installieren] aus. Bei einem Anschluss an ein Netzwerk Aktivieren Sie [Netzwerkdrucker für Installation suchen]. Bei einem Anschluss über den Druckserver (Client) Wählen Sie [Legen Sie den Anschluss manuell fest]. HINWEIS So wählen Sie den Anschlusstyp (Netzwerkanschluss) aus. Klicken Sie auf [Detaillierte Einstellungen]. [MFNP-Anschluss] Dieser Anschluss kann die IP-Adresse des Druckers automatisch erkennen.
Wenn das USB-Kabel angeschlossen ist, der Drucker jedoch nicht automatisch erkannt wird (USB Verbindung) "Der Drucker wird nicht automatisch erkannt" 8 Nach erfolgter Installation des Druckertreibers beginnt die Installation der e-Anleitung. Warten Sie einen Moment, bis die Installation abgeschlossen ist. (Die Installation der e-Anleitung kann einige Zeit dauern.) 9 Klicken Sie auf [Beenden]. 10 Vergewissern Sie sich, dass [ [Weiter].
Wenn [ ] angezeigt wird "Sie können den Druckertreiber nicht installieren" 11 Führen Sie einen Neustart Ihres Computers durch. (1) Aktivieren Sie das Kontrollkästchen [Computer jetzt neu starten]. (2) Klicken Sie auf [Neu starten]. Wenn der folgende Dialog angezeigt wird, können Sie die CD-ROM aus dem Laufwerk nehmen. Wenn die Installation abgeschlossen ist, werden ein Symbol und ein Ordner für diesen Drucker erstellt.
09US-02J Verbinden des Druckers und Computers Im Folgenden werden die Verfahren und Vorsichtsmaßnahmen beim Anschluss des Druckers an einem Computer erläutert. USB Verbindung Wired LAN Verbindung Wireless LAN Verbindung (nur LBP7110Cw) HINWEIS Kabelgebundenes LAN und Wireless-LAN (drahtloses LAN) können nicht gleichzeitig verwendet werden Wenn der Drucker über eine Wireless-LAN-Verbindung verwendet wird, schließen Sie nicht ein LAN-Kabel am Drucker an. Dies kann sonst zu Fehlfunktionen führen.
Wired LAN Verbindung Siehe "Achtung (Wired LAN Verbindung)", bevor der Drucker an ein kabelgebundenes LAN angeschlossen wird. 1 Schließen Sie das LAN-Kabel an. 2 Schalten Sie den Drucker ein. 3 Vergewissern Sie sich, dass die Verbindungsanzeige (A) an der Netzwerkschnittstelle leuchtet.
Wenn die Verbindungsanzeige aus ist "Alle Anzeigen an der Netzwerkschnittstelle sind aus" Wireless LAN Verbindung (nur LBP7110Cw) Siehe "Achtung (Wireless LAN Verbindung) (nur LBP7110Cw)", bevor der Drucker an ein Wireless-LAN angeschlossen wird. 1 Befolgen Sie die Anweisungen unter "MF/LBP Network Setup Tool" zur Festlegung der Anschlusseinstellungen. Um "MF/LBP Network Setup Tool" direkt zu starten, siehe "MF/LBP Network Setup Tool direkt starten".
09US-02K Achtung (Wired LAN Verbindung) WICHTIG Informationen zur Netzwerksicherheit Die Herstellung einer Verbindung in einer ungesicherten Netzwerkumgebung birgt das Risiko, dass persönliche Informationen und andere Daten an Dritte gelangen können. Seien Sie deshalb vorsichtig. HINWEIS Verwendung in einem Büro Näheres zu Netzwerkeinstellungen erfahren Sie von Ihrem Netzwerkadministrator. Informationen zur Netzwerkumgebung Dieser Drucker unterstützt 10BASE-T- und 100BASE-TX-Verbindungen.
09US-02L Achtung (Wireless LAN Verbindung) (nur LBP7110Cw) Vorsichtsmaßnahmen in Bezug auf die Sicherheit bei Verwendung von Wireless-LAN-Produkten Das Wireless-LAN bietet den Vorteil, Informationen an und von einem Computer über Funkwellen zwischen WirelessLAN-Zugangspunkten (anstelle eines LAN-Kabels) im Bereich des drahtlosen Signals zu senden und zu empfangen.
Dieser Drucker wird ohne ein Wireless-LAN-Zugangspunkt oder andere zugehörige Geräte geliefert. Halten Sie einen Wireless-LAN-Zugangspunkt für Anschlusszwecke bereit. Wenn Sie diesen Drucker in einer drahtlosen LAN-Umgebung verwenden möchten, müssen Sie über einen Wireless-LAN-Zugangspunkt mit 2,4-GHz-Frequenz verfügen, der konform zu IEEE 802.11b/g/n ist. Näheres finden Sie in der Anleitung des jeweiligen Geräts oder erfahren Sie vom jeweiligen Hersteller.
09US-02R Bildschirm [Drucker für Installation auswählen] Verwenden Sie diesen Bildschirm wie unten erläutert zur Auswahl des zu installierenden Druckers. 1 Fügen Sie den Drucker der [Druckerliste für Treiberinstallation] hinzu. (1) Wählen Sie den zu installierenden Drucker. (2) Klicken Sie auf [Hinzufügen].
(2) Klicken Sie auf [Weiter]. ĺ Fahren Sie mit Bildschirm [Druckerinformation] fort.
09US-02S Bildschirm [Druckerinformation] Verwenden Sie diesen Bildschirm, um den mit dem Drucker zu verwendenden Anschluss, den Druckernamen und weitere Druckerinformationen festzulegen. Wenn ein Anschluss (Port) verwendet wird, der bereits festgelegt wurde Wählen Sie den mit dem Drucker zu verwendenden Anschluss. Wenn ein Anschluss hinzugefügt wird Klicken Sie auf [Anschluss hinzufügen].
(3) Klicken Sie auf [OK]. Anschlusseinstellung, wenn der Drucker über den Druckserver verwendet wird Legen Sie den Anschluss mithilfe des folgenden Ablaufs fest. 1 Klicken Sie auf [Anschluss hinzufügen]. 2 Wählen Sie den hinzuzufügenden Anschluss aus. (1) Wählen Sie [Netzwerk] aus. (2) Klicken Sie auf [OK]. 3 Wählen Sie einen freigegebenen Drucker aus. (1) Wählen Sie einen freigegebenen Drucker auf dem Druckserver aus. (2) Klicken Sie auf [OK].
㻝㻞㻥㻌㻛㻌㻡㻞㻠
09US-02U Nach der Installation Wenn der Druckertreiber ordnungsgemäß installiert wurde, werden die folgenden Symbole und Ordner an den folgenden Positionen hinzugefügt. Druckerordner ( "Grundlagen und andere Informationen zur Vorgehensweise unter Windows") Druckersymbol für diesen Drucker Taskleiste Symbol für Statusfenster des Druckers Das Symbol wird nicht angezeigt, wenn Sie nach der Druckertreiberinstallation keinen Neustart Ihres Computers durchgeführt haben.
[Alle Programme] im Menü [Start] [Canon LBP7100C 7110C] - [LBP7100C 7110C e-Anleitung] Diese Option wird nicht angezeigt, wenn Sie den Druckertreiber mit einer anderen Methode anstelle von "Einfache Installation" installieren. Wenn die Symbole und Ordner nicht hinzugefügt werden Die Installation wurde nicht ordnungsgemäß abgeschlossen. Lesen Sie den Abschnitt "Sie können den Druckertreiber nicht installieren", und installieren Sie den Druckertreiber erneut.
09US-02W Deinstallieren des Druckertreibers Das Verfahren zum Entfernen des Druckertreibers, um den Computer in denselben Zustand wie vor der Installation des Druckertreibers zurückzusetzen, wird Deinstallation genannt. Zur Deinstallation des Druckertreibers gehen Sie folgendermaßen vor. 1 Wenn ein USB-Kabel angeschlossen ist, schalten Sie den Drucker und Computer aus, und trennen Sie dann das USB-Kabel ab.
(2) Klicken Sie auf [Löschen]. WICHTIG Informationen zu [Aufräumen] Beim Klicken auf [Aufräumen] werden alle in der Liste aufgeführten Treiberdateien, einschließlich des ausgewählten Treibers, und Registry-Informationen gelöscht. Der Druckertreiber wird normalerweise über [Löschen] deinstalliert. Wenn dieser Drucker nicht angezeigt wird Klicken Sie auf [Aufräumen]. 6 Klicken Sie auf [Ja], um die Deinstallation zu starten. Warten Sie einen Moment, bis die Deinstallation abgeschlossen ist.
8 Öffnen Sie den Druckerordner. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 9 Vergewissern Sie sich, dass das Symbol für diesen Drucker nicht angezeigt wird. WICHTIG Wenn das Symbol für diesen Drucker angezeigt wird 1. Klicken Sie mit der rechten Maustaste auf das Symbol, und wählen Sie dann aus dem Kontextmenü [Gerät entfernen] oder [Löschen]. 2. Klicken Sie auf [Ja]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird, klicken Sie auf [Ja].
11 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. 12 Klicken Sie auf [Zusätzliche Software-Programme]. Wenn der oben abgebildete Dialog nicht angezeigt wird "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Wenn das Dialogfeld [Automatische Wiedergabe] angezeigt wird Klicken Sie auf [AUTORUN.EXE ausführen]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen].
14 Klicken Sie auf [Deinstallieren], um die Deinstallation zu starten. Warten Sie einen Moment, bis die Deinstallation abgeschlossen ist. (Die Deinstallation der e-Anleitung kann einige Zeit dauern.) 15 Klicken Sie auf [Beenden]. 16 Klicken Sie auf [Zurück].
17 Klicken Sie auf [Ende]. Wenn der folgende Dialog angezeigt wird, können Sie die CD-ROM aus dem Laufwerk nehmen.
09US-02X Grundlagen für den Druckerbetrieb Verwendbares Papier Vorsichtsmaßnahmen bei Papier Bedruckbarer Bereich Einlegen von Papier und Papierausgabe Einlegen von Papier Allgemeines Druckverfahren Informationen zur Verwendung der Hilfe Abbrechen eines Auftrags Überprüfen des Druckerstatus 㻝㻟㻤㻌㻛㻌㻡㻞㻠
09US-02Y Verwendbares Papier Im Folgenden werden die Papierformate aufgeführt, die mit diesem Drucker verwendet werden können.
Schweres Papier (86 bis 120 g/m²) Letter [Schwer 1]*5 Executive Statement Foolscap 16K Anwenderdefiniertes Papierformat *4 A4 B5 A5 Legal Schweres Papier (121 bis 163 g/m²) Letter [Schwer 2] Executive Statement Foolscap 16K Anwenderdefiniertes Papierformat *4 Folie (nur für Schwarzweißdruck) A4 [Folie] Letter A4 B5 A5 Legal Letter Etikett [Etiketten] Executive Statement Foolscap 16K Anwenderdefiniertes Papierformat *4 Indexkarte [Schwer 2] Indexkarte Briefumschlag Monarch [Briefumschlag] Briefu
Foolscap 16K Anwenderdefiniertes Papierformat *4 *1 Die Einstellung befindet sich im Druckertreiber auf der Registerkarte [Papierzufuhr]. *2 Recycling-Papier kann ebenfalls verwendet werden. *3 Wenn Sie auf Papier mit 75 bis 85 g/m² drucken möchten, können Sie entweder [Normal 1] oder [Normal 2] festlegen. *9 Sie können Papier mit den folgenden benutzerdefinierten Papierformaten einlegen.
09US-030 Vorsichtsmaßnahmen bei Papier Papier, das vor der Verwendung Aufmerksamkeit benötigt Die Verwendung der folgenden Papiertypen hat in einigen Fällen Einfluss auf die Druckergebnisse oder den Drucker.
nicht noch einmal drucken. Lagern von Papier Die Qualität des Papiers kann sich verschlechtern, wenn es unsachgemäß gelagert wird, auch wenn das Papier den normalen Spezifikationen entspricht. Minderwertiges Papier kann fehlerhafte Papiereinzüge, Papierstaus oder eine verminderte Druckqualität verursachen. Lagern von Papier Beachten Sie bei der Papierlagerung und im Umgang mit Papier die folgenden Richtlinien. Lagern Sie Papier auf einer ebenen Fläche.
09US-031 Bedruckbarer Bereich HINWEIS Wenn Sie den bedruckbaren Bereich erweitern möchten Legen Sie die folgenden Einstellungen im Druckertreiber fest. 1. Klicken Sie auf der Registerkarte [Endverarbeitung] auf [Erweiterte Einstellungen]. 2. Setzen Sie [Druckbereich und Druck ausdehnen] auf [Ein]. Je nach den zu druckenden Druckdaten kann die Papierkante während des Druckens teilweise fehlen oder während des Farbdrucks Flecken aufweisen.
09US-032 Einlegen von Papier und Papierausgabe Dieser Drucker verfügt über die folgende Papierzufuhr und das folgende Ausgabefach. Papierzufuhr (A): Papierkassette Ausgabeziel (B): Ausgabefach "Einlegen von Papier" Gibt Papier mit der bedruckten Seite nach unten aus. Papierfassungsvermögen der Papierzufuhr und des Ausgabeziels Papierzufuhr Ausgabeziel Papiertyp Papierkassette Ausgabefach * Normalpapier (z. B. 90 g/m²) Ca. 150 Blatt Ca. 125 Blatt Schweres Papier (z. B. 120 g/m²) Ca.
09US-033 Einlegen von Papier Näheres zu Papier, das Sie einlegen können, siehe "Verwendbares Papier". Lesen Sie vor dem Einlegen von Papier den Abschnitt "Achtung (Einlegen von Papier)". 1 Ziehen Sie die Papierkassette heraus. 2 Stellen Sie die Papierführungen etwas breiter und länger ein als das tatsächliche Papierformat. Halten Sie den Verriegelungsfreigabehebel (A) und verschieben Sie dabei die Papierführung an der vorderen Mitte.
A5-Papier Statement-Papier Anwenderdefiniertes Papierformat mit einer Breite und Länge (Höhe) zwischen 127,0 und 215,9 mm Wenn Sie Papier in Querformatrichtung einlegen, wählen Sie beim Drucken im Druckertreiber auf der Registerkarte [Papierzufuhr] die Option [A5 horizontal zuführen], [Statement horizontal zuführen] oder [Anwenderdefiniertes Papier horizontal zuführen].
Achten Sie darauf, dass der Papierstapel nicht über die Papiergrenzmarkierungslinien hinausgeht. Wenn der Papierstapel über die Papiergrenzmarkierungslinien hinausgeht, kann es zu einem fehlerhaften Einzug kommen. 6 Setzen Sie die Papierkassette in den Drucker ein. HINWEIS Wenn Sie Papier einlegen, das länger als A4 ist Obwohl die Vorderseite der Papierkassette mit der Vorderseite des Druckers, wie in der Abbildung gezeigt, nicht fluchtet, ist der Drucker betriebsbereit.
09US-034 Achtung (Einlegen von Papier) Siehe auch "Wichtige Sicherheitsvorschriften". WICHTIG Berühren Sie nicht das schwarze Gummikissen (A) in der Papierkassette. Dies kann zu fehlerhaftem Papiereinzug führen. Ziehen Sie die Papierkassette während des Druckvorgangs nicht heraus. Es kann andernfalls zu einem Papierstau oder zu einer Beschädigung des Druckers kommen. Wenn Sie schlecht geschnittenes Papier verwenden Es werden möglicherweise mehrere Blätter Papier gleichzeitig eingezogen.
09US-035 Registrieren des Papierformats und -typs Die Papierkassette des Druckers kann das Papierformat und den Papiertyp nicht automatisch erkennen. Daher müssen Sie das Format und den Typ des eingelegten Papiers registrieren. Registrieren Sie das Papierformat und den Papiertyp anhand des folgenden Ablaufs.
Wählen Sie das Format des in die Papierkassette eingelegten Papiers. [Papierformat] [Papierzufuhrrichtung] Wenn [Sonderformat] festgelegt ist, wird das Papierformat des gedruckten Auftrags jedes Mal nach Beendigung des Druckvorgangs automatisch registriert. Wählen Sie die Einzugsrichtung (Ausrichtung) des in die Papierkassette eingelegten Papiers, wenn A5-, Statement- oder anwenderdefiniertes Papier verwendet wird. Wählen Sie den Typ des in die Papierkassette eingelegten Papiers.
09US-036 Allgemeines Druckverfahren In diesem Abschnitt wird das allgemeine Druckverfahren aus einer Anwendung beschrieben, wobei Adobe Reader als Beispiel dient. Das Druckverfahren kann abhängig von der von Ihnen verwendeten Anwendung variieren. Lesen Sie vor dem Drucken den Abschnitt "Achtung (Druckgrundlagen)". 1 Legen Sie Papier in die Papierkassette ein. "Einlegen von Papier" 2 Öffnen Sie die zu druckende PDF-Datei mit Adobe Reader. 3 Wählen Sie aus dem Menü [Datei] die Option [Drucken] aus.
5 Klicken Sie auf [Eigenschaften]. 6 Geben Sie die Einstellungen für [Seitenformat] und [Ausgabeformat] an. (1) Zeigen Sie die Registerkarte [Seite einrichten] an. (2) Wählen Sie das Seitenformat des in einer Anwendung erstellten Dokuments aus. (3) Wählen Sie aus, ob sich das Format des zu bedruckenden Papiers von dem Format der Daten unterscheidet.
Wenn die Einstellungen für [Seitenformat] und [Ausgabeformat] nicht identisch sind Der Ausdruck wird automatisch passend für die Seite verkleinert oder vergrößert. 7 Geben Sie die Einstellung für [Papiertyp] an. (1) Zeigen Sie die Registerkarte [Papierzufuhr] an. (2) Wählen Sie den Typ des in die Papierzufuhr eingelegten Papiers aus.* * Geben Sie die Einstellung entsprechend dem Papiertyp folgendermaßen an.
Wellt sich das bedruckte Papier (die bedruckte Seite wellt sich nach außen), wenn nach Auswahl von [Dünn 1] auf 60 g/m² Papier gedruckt wird, wählen Sie [Dünn 2]. *4 Wenn Sie für den Druck mit der Auswahl [Briefumschlag] die Tonerfixierung verbessern möchten, wählen Sie [Briefumschlag H] aus. *5 Wenn eine der Einstellungen die folgenden Probleme verursacht, wählen Sie zum Drucken die andere Einstellung. Das ausgegebene Papier wellt sich. Auf nicht bedruckten Bereichen erscheinen Restbilder.
09US-037 Achtung (Druckgrundlagen) WICHTIG Überprüfen der Papierformat- und Papiertypeinstellungen für die Papierkassette Vergewissern Sie sich, dass Format und Typ des in die Papierkassette eingelegten Papiers mit dem registrierten Papierformat und Papiertyp identisch sind. "Registrieren des Papierformats und -typs" HINWEIS Installieren Sie den Druckertreiber. Der Druckertreiber ist eine Software, die für das Drucken mit diesem Drucker erforderlich ist. Installieren Sie vor dem Drucken den Druckertreiber.
09US-038 Informationen zur Verwendung der Hilfe Nähere Informationen zu den einzelnen Einstellungen im Druckertreiber oder im Statusfenster des Druckers finden Sie in den Anleitungen in der Hilfe. (1) Navigationsfenster Wählen Sie ein Thema für die von Ihnen gewünschte Option. [Inhalt] Im Inhalt werden die Titel der Kontexte angezeigt. Klicken Sie auf den Titel des gewünschten Themas, um die Erläuterung anzuzeigen.
㻝㻡㻤㻌㻛㻌㻡㻞㻠
09US-039 Abbrechen eines Auftrags Sie haben die Möglichkeit, mit einer der folgenden Methoden einen Druckauftrag abzubrechen. Abbrechen eines Auftrags, der gerade gedruckt wird oder auf die Druckausgabe vom Computer wartet Sie können einen Auftrag, der gerade gedruckt wird, durch einmaliges Klicken abbrechen, oder einen Auftrag, der auf die Druckausgabe wartet, im Modul Printer Status Window auswählen und abbrechen.
09US-03A Abbrechen eines Auftrags, der gerade gedruckt wird oder auf die Druckausgabe vom Computer wartet 1 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 2 Brechen Sie einen Auftrag ab. Wenn ein Auftrag, der gerade gedruckt wird, mit einem Klick abgebrochen wird Klicken Sie auf [ ] (Auftrag abbrechen). Wenn ein Auftrag, der auf die Druckausgabe wartet, ausgewählt und abgebrochen wird 1. Wählen Sie aus dem Menü [Auftrag] die Option [Auftragsstatus]. 2.
3. Klicken Sie auf [OK]. Wenn Sie einen Auftrag nicht abbrechen können Sie können einen Auftrag, dessen Seiten sich im Druckprozess befinden, nicht abbrechen.
09US-03C Abbrechen eines Druckauftrags, der gerade gedruckt wird, mit der Taste Auftrag abbrechen 1 Wenn Sie auf dem Bedienungsfeld die Taste [ der gerade gedrückt wird, abgebrochen. ] (Auftrag abbrechen) drücken, wird der Auftrag, Sobald die Taste losgelassen wird, beginnt der Drucker mit dem Abbruch des Druckauftrags. Wenn Sie einen Auftrag nicht abbrechen können Sie können einen Auftrag, dessen Seiten sich im Druckprozess befinden, nicht abbrechen.
09US-03E Überprüfen des Druckerstatus Sie können den aktuellen Druckerstatus im Statusfenster des Druckers überprüfen. "Statusfenster des Druckers" Im Statusfenster des Druckers wird der aktuellen Druckerstatus durch Meldungen, Animationen und Symbole angezeigt. Wenn Probleme mit dem Drucker auftreten, überprüfen Sie das Statusfenster des Druckers. HINWEIS Wenn Drucker und Computer über ein Netzwerk angeschlossen sind Sie können den aktuellen Druckerstatus auch mithilfe von Remote UI überprüfen.
09US-03F Drucken auf verschiedenen Papiertypen Drucken auf Normalpapier, schwerem Papier oder Indexkarten Drucken auf Folien (nur Schwarzweißdruck) Drucken auf Etiketten Drucken auf Briefumschlägen Drucken auf beschichtetem Papier Drucken auf Papier mit benutzerdefiniertem Format Ausrichtung des Papiers beim Einlegen 㻝㻢㻠㻌㻛㻌㻡㻞㻠
09US-03H Drucken auf Normalpapier, schwerem Papier oder Indexkarten Überprüfen des verwendbaren Papiers Mit diesem Drucker kann auf Normalpapier (60 bis 90 g/m²) und schwerem Papier (86 bis 163 g/m²) der folgenden Formate oder auf Indexkarten gedruckt werden.
09US-03J Drucken auf Folien (nur Schwarzweißdruck) Überprüfen der verwendbaren Folien Mit diesem Drucker können die folgenden Folienformate verwendet werden. Standardformate A4, Letter Folien können nur schwarzweiß bedruckt werden. Einlegen von Folien Legen Sie die Folien in die Papierkassette ein. "Einlegen von Papier" Fächern Sie die Folien vor dem Einlegen sorgfältig auf, und richten Sie dann die Kanten aus, da die Folien aneinander haften können.
09US-03K Drucken auf Etiketten Überprüfen der verwendbaren Etiketten Mit diesem Drucker können die folgenden Etikettenformate verwendet werden.
09US-03L Drucken auf Briefumschlägen Überprüfen der verwendbaren Briefumschläge Mit diesem Drucker können die folgenden Briefumschläge verwendet werden. Wenn Sie die folgenden Briefumschläge verwenden, kann es zu einem schwer zu beseitigenden Papierstau oder Beschädigungen des Druckers kommen.
zusammen. Drucken aus einer Anwendung Führen Sie nach dem Einlegen von Briefumschlägen einen Druckvorgang durch. "Allgemeines Druckverfahren" Drucken Sie nicht auf der Rückseite (geleimte Seite) der Briefumschläge. Beim Drucken auf Briefumschlägen verringert sich die Druckgeschwindigkeit. Briefumschläge können beim Drucken Knitterfalten bekommen.
09US-03R Drucken auf beschichtetem Papier Überprüfen von verwendbarem beschichtetem Papier Mit diesem Drucker können die folgenden Formate von beschichtetem Papier (100 bis 220 g/m²) verwendet werden.
09US-03S Drucken auf Papier mit benutzerdefiniertem Format Überprüfen des verwendbaren Papiers mit benutzerdefiniertem Format Mit diesem Drucker kann Papier mit dem folgenden benutzerdefinierten Format verwendet werden. Bei Hochformatausrichtung: Breite 83,0 bis 215,9 mm, Länge (Höhe) 127,0 bis 355,6 mm Bei Querformatausrichtung: Breite 127,0 bis 215,9 mm, Länge (Höhe) 127,0 bis 215,9 mm Einlegen von Papier mit benutzerdefiniertem Format Legen Sie Papier in die Papierkassette ein.
09US-03U Registrieren eines benutzerdefinierten Papierformats 1 Öffnen Sie den Druckerordner. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 2 Klicken Sie mit der rechten Maustaste auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü [Druckeinstellungen] aus. 3 Zeigen Sie das Dialogfeld [Benutzerdefiniertes Papierformat] an. (1) Zeigen Sie die Registerkarte [Seite einrichten] an. (2) Klicken Sie auf [Anwenderdefiniertes Papierformat].
4 Geben Sie das benutzerdefinierte Papierformat an. [Bezeichnung für anwenderdefiniertes Papierformat] Geben Sie die Bezeichnung für das hinzuzufügende benutzerdefinierte Papierformat ein. Sie können bis zu 31 Zeichen eingeben. [Einheit] Wählen Sie die Einheit aus, die bei der Einstellung des benutzerdefinierten Papierformats verwendet werden soll. [Papierformat] Geben Sie die Höhe und Breite des benutzerdefinierten Papierformats an ([Höhe] [Breite]).
09US-03W Ausrichtung des Papiers beim Einlegen Wenn Sie auf Papier mit einem Briefkopf oder Logo drucken möchten, legen Sie das Papier in der richtigen Ausrichtung folgendermaßen ein. Wenn Sie auf Briefumschlägen drucken, lesen Sie den Abschnitt "Drucken auf Briefumschlägen".
09US-03X Hilfreiche Druckfunktionen Anzeigen des Einstellungsdialogs Skalieren der Druckausgabe Layoutdruck (Drucken von N Seiten) Drucken eines Bildes größer als A4 (Posterdruck) Einfügen eines Wasserzeichens in ein zu druckendes Dokument (Drucken mit Wasserzeichen) Drucken von Rändern, Druckdatum und anderen Angaben Drucken eines Farbdokuments in Schwarzweiß Kombinieren von Daten vor dem Drucken Ändern der Ausgabemethode entsprechend den Druckdaten oder der Anzahl der Kopien Einstellen der Bild
09US-03Y Anzeigen des Einstellungsdialogs Sie können die verschiedenen Druckeinstellungen im Einstellungsdialog des Druckertreibers angeben. Sie können den Einstellungsdialog folgendermaßen anzeigen. Anzeige aus einer Anwendung Die angegebenen Einstellungen gelten nur für die Daten, die aus derselben Anwendung gedruckt werden sollen. Wenn Sie die Anwendung beenden, werden die geänderten Einstellungen auf die Standardeinstellungen zurückgesetzt.
hinzuzufügenden Profile festlegen. Informationen zur Anzeige Rechtsklicken Sie auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü die Option [Druckereigenschaften] oder [Eigenschaften] aus. HINWEIS Nähere Informationen zu den Einstellungen Siehe Hilfe. "Informationen zur Verwendung der Hilfe" Informationen zu den von Windows angezeigten Registerkarten Die folgenden Registerkarten werden von Windows angezeigt. Nähere Informationen finden Sie in der Windows-Hilfe.
09US-040 Skalieren der Druckausgabe Sie können mit einer automatischen Skalierung entsprechend dem Papierformat oder mit einer beliebigen Skalierung drucken. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Geben Sie die Einstellungen für die Skalierung an. Drucken mit automatischer Skalierung entsprechend dem Papierformat (1) Zeigen Sie die Registerkarte [Seite einrichten] an.
3 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-041 Layoutdruck (Drucken von N Seiten) Sie können mehrere Seiten auf einem Blatt drucken. Diese Druckmethode wird als Intensivdrucken oder Drucken von N Seiten bezeichnet. WICHTIG Informationen zur Anwendungsfunktion, mit der Sie ein Dokument als sortierten Kopiensatz drucken können Einige Anwendungen bieten eine Funktion, mit der Sie ein Dokument als sortierten Kopiensatz drucken können. Verwenden Sie diese Funktion nicht, wenn Sie mehrere Seiten auf einem Blatt drucken möchten.
Wenn Sie die Einstellung nicht angeben können "Die Druckertreibereinstellungen können nicht geändert werden" HINWEIS Festlegen der Einstellung mithilfe der Vorschau Sie können ein Seitenlayout auch festlegen, indem Sie wiederholt auf das Dokumentbild in der Vorschau klicken, wenn [ ] ausgewählt ist. (Über die Vorschau können nur [2 auf 1] und [4 auf 1] festgelegt werden.) 3 Geben Sie das Seitenfolgelayout auf dem Papier an. 4 Klicken Sie auf [OK].
09US-042 Drucken eines Bildes größer als A4 (Posterdruck) Sie können ein einseitiges Bild vergrößern und aufteilen, um es auf mehreren Blättern Papier zu drucken. Durch Zusammenfügen dieser Ausdrucke können Sie ein großes Poster erstellen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Geben Sie die Einstellung für den Posterdruck an. (1) Zeigen Sie die Registerkarte [Seite einrichten] an.
Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-043 Einfügen eines Wasserzeichens in ein zu druckendes Dokument (Drucken mit Wasserzeichen) Sie können ein Dokument, das mit einer Anwendung erstellt wurde, mit einem Wasserzeichen (beispielsweise [KOPIE] und [ENTWURF]) überlagern. Darüber hinaus können Sie neue Wasserzeichen hinzufügen und die hinzugefügten Wasserzeichen bearbeiten oder löschen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Wählen Sie ein Wasserzeichen aus.
3 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-044 Hinzufügen, Bearbeiten oder Löschen eines Wasserzeichens 1 Zeigen Sie das Dialogfeld [Wasserzeichen bearbeiten] an. (1) Zeigen Sie die Registerkarte [Seite einrichten] an. (2) Aktivieren Sie das Kontrollkästchen [Wasserzeichen]. (3) Klicken Sie auf [Wasserzeichen bearbeiten]. Wenn Sie das Kontrollkästchen [Wasserzeichen] nicht aktivieren können "Die Druckertreibereinstellungen können nicht geändert werden" 2 Fügen Sie ein Wasserzeichen hinzu, oder bearbeiten oder löschen Sie ein Wasserzeichen.
Bearbeiten eines Wasserzeichens (1) Wählen Sie aus [Liste Wasserzeichen] ein zu bearbeitendes Wasserzeichen aus. (2) Bearbeiten Sie das Wasserzeichen. Die Standardwasserzeichen können nicht bearbeitet werden. Nähere Informationen zu den einzelnen Einstellungen finden Sie in der Hilfe. "Informationen zur Verwendung der Hilfe" Löschen eines Wasserzeichens (1) Wählen Sie aus [Liste Wasserzeichen] ein zu löschendes Wasserzeichen aus. (2) Klicken Sie auf [Löschen].
3 Klicken Sie auf [OK]. Daraufhin wird die Registerkarte [Seite einrichten] erneut angezeigt.
09US-045 Drucken von Rändern, Druckdatum und anderen Angaben Sie können einen Rand, das Datum und die Seitenzahlen auf dem Dokument drucken. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Zeigen Sie das Dialogfeld [Seitenoptionen] an. (1) Zeigen Sie die Registerkarte [Seite einrichten] an. (2) Klicken Sie auf [Seitenoptionen].
"Informationen zur Verwendung der Hilfe" (2) Klicken Sie auf [OK]. Daraufhin wird die Registerkarte [Seite einrichten] erneut angezeigt. 4 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-046 Drucken eines Farbdokuments in Schwarzweiß Farbdokumente können durch Verwendung von nur Schwarztoner schwarzweiß gedruckt werden. Diese Option ist praktisch, wenn von Farbdokumenten eine Testseite ausgedruckt werden soll. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Legen Sie die Einstellung für [Farbmodus] fest. (1) Zeigen Sie die Registerkarte [Qualität] an. (2) Wählen Sie [Schwarzweiß].
: [Farbig] 3 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-047 Kombinieren von Daten vor dem Drucken Sie können mehrere Daten kombinieren. Sie können zudem die Einstellungen für die kombinierten Druckdaten ändern und die Druckdaten unterschiedlicher Anwendungen bearbeiten. Sie können auch eine Vorschau der Druckdaten anzeigen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers aus einer Anwendung an. "Anzeigen des Einstellungsdialogs" 2 Wählen Sie unter [Ausgabemethode] die Option [Bearbeitung und Vorschau] aus.
Konfigurieren Sie die Druckeinstellungen. (1) Geben Sie die Druckeinstellungen auf den einzelnen Registerkarten nach Bedarf an. (2) Klicken Sie auf [OK]. 5 Führen Sie den Druckvorgang aus einer Anwendung durch. ĺ Die Liste der Druckdaten wird im Dialogfeld [Canon PageComposer] angezeigt.
Wenn der folgende Dialog angezeigt wird, lesen Sie den Inhalt, und klicken Sie dann auf [OK]. 8 Gehen Sie folgendermaßen vor. (1) Geben Sie den Namen der kombinierten Druckdaten ein. (2) Klicken Sie auf [Kombinieren]. 9 Drucken Sie die kombinierten Druckdaten. (1) Wählen Sie die kombinierten Druckdaten aus. (2) Wählen Sie aus dem Menü [Datei] die Option [Drucken] aus. Der Drucker startet daraufhin den Druckvorgang.
HINWEIS Kombinierte Druckdaten werden nicht gespeichert. Nachdem die kombinierten Druckdaten gedruckt wurden, werden sie aus Canon PageComposer gelöscht. Die Druckdaten werden auch gelöscht, wenn Canon PageComposer ohne Drucken der Druckdaten geschlossen wird. Nähere Informationen zu Canon PageComposer Siehe Hilfe für Canon PageComposer. Die Hilfe wird angezeigt, indem Sie im Menü [Hilfe] auf [Hilfe] klicken.
09US-048 Ändern der Ausgabemethode entsprechend den Druckdaten oder der Anzahl der Kopien Drucken mit einem Bundsteg Auswählen der Papierausgabemethode Drucken einer um 180 Grad gedrehten Seite 㻝㻥㻣㻌㻛㻌㻡㻞㻠
09US-049 Drucken mit einem Bundsteg Sie können für das zu druckende Papier einen Bundsteg von 0 bis 50 mm festlegen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Legen Sie die Einstellung für [Bindung] fest. (1) Zeigen Sie die Registerkarte [Endverarbeitung] an. (2) Wählen Sie eine Kante aus, an der sich der Bundsteg befinden soll.
(1) Klicken Sie auf [Bundsteg]. (2) Legen Sie die Bundstegbreite fest. (3) Klicken Sie auf [OK]. Daraufhin wird die Registerkarte [Endverarbeitung] erneut angezeigt. Wenn Sie die Einstellung nicht angeben können "Die Druckertreibereinstellungen können nicht geändert werden" 4 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-04A Auswählen der Papierausgabemethode Sie können die Papierausgabemethode vor dem Drucken auswählen. Die Ausdrucke eines abgeschlossenen Auftrags werden zusammengefasst. Die Ausdrucke eines abgeschlossenen Auftrags werden sortiert. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Geben Sie die Einstellung für [Endverarbeitung] an.
3 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-04C Drucken einer um 180 Grad gedrehten Seite Sie können die Druckdaten um 180 Grad gedreht drucken, wenn die Ausrichtung des in eine Papierzufuhr eingelegten Papiers nicht mit der Ausrichtung des Dokuments übereinstimmt. Diese Option ist hilfreich beim Drucken auf Briefumschlägen und Indexkarten, die nur in bestimmten Ausrichtungen eingezogen werden können. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an.
4 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-04E Einstellen der Bildqualität oder Farben Druckvorgänge für besondere Druckdaten Einstellen der Tonerdichte Drucken mit eingestellter Helligkeit und eingestelltem Kontrast Farbjustage Abgleichen der Farbe mit dem Bildschirm 㻞㻜㻠㻌㻛㻌㻡㻞㻠
09US-04F Druckvorgänge für besondere Druckdaten Wenn Sie den für den Inhalt des Dokuments entsprechenden Modus auswählen, können Sie mit geeigneten Einstellungen drucken. Wenn Sie beispielsweise für den Druck eines Fotos die Option [Vivid Photo] auswählen, werden die Druckeinstellungen auf die optimalen Einstellungen für den Druck von Fotos gesetzt. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Geben Sie die Einstellung für [Dokument] an.
09US-04H Einstellen der Tonerdichte Sie können für einen Druckvorgang die Tonerdichte einstellen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Zeigen Sie das Dialogfeld [Erweiterte Einstellungen] an. (1) Zeigen Sie die Registerkarte [Qualität] an. (2) Klicken Sie auf [Erweiterte Einstellungen]. 3 Zeigt das Dialogfeld [Details Tonerdichte] an. (1) Wählen Sie [Tonerdichte] aus. (2) Wählen Sie [Justieren] aus. (3) Klicken Sie auf [Details].
4 Stellen Sie die Tonerdichte ein. (1) Versetzen Sie den Regler der jeweiligen Farbe in horizontaler Richtung, um die Dichte einzustellen. Sie können auch die Tonerdichte der jeweiligen Farbe für jeden Dichtebereich einstellen. "Einstellen der Tonerdichte der jeweiligen Farbe für jeden Dichtebereich" (2) Klicken Sie auf [OK]. Daraufhin wird das Dialogfeld [Erweiterte Einstellungen] erneut angezeigt. 5 Klicken Sie auf [OK]. Daraufhin wird die Registerkarte [Qualität] erneut angezeigt.
09US-04J Einstellen der Tonerdichte der jeweiligen Farbe für jeden Dichtebereich 1 Klicken Sie auf [Feinjustage Dichte] 2 Stellen Sie die Tonerdichte der jeweiligen Farbe für jeden Dichtebereich ein. (1) Zeigen Sie die Registerkarten der Farben an, die Sie einstellen möchten. (2) Versetzen Sie den Regler des jeweiligen Dichtebereichs in horizontaler Richtung, um die Dichte einzustellen. (3) Klicken Sie auf [OK]. Daraufhin wird das Dialogfeld [Details Tonerdichte] erneut angezeigt.
[Niedrig] 㻞㻜㻥㻌㻛㻌㻡㻞㻠
09US-04K Drucken mit eingestellter Helligkeit und eingestelltem Kontrast Sie können für einen Druckvorgang die Helligkeit und den Kontrast einstellen. 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Zeigen Sie das Dialogfeld [Farbeinstellungen] an. (1) Zeigen Sie die Registerkarte [Qualität] an. (2) Aktivieren Sie das Kontrollkästchen [Manuelle Farbeinstellungen]. (3) Klicken Sie auf [Farbeinstellungen]. 3 Stellen Sie die Helligkeit und den Kontrast ein.
4 Klicken Sie auf [OK]. Daraufhin wird die Registerkarte [Qualität] erneut angezeigt. 5 Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-04L Farbjustage Sie können für einen Farbdruckvorgang die Farbe einstellen. In diesem Abschnitt wird die Vorgehensweise beim Einstellen der Farbe im Druckertreiber vor dem Druckvorgang beschrieben. Führen Sie die Kalibrierung durch, sobald sich die Farben geändert haben und die Daten nicht in den korrekten Farben (den festgelegten Farben) gedruckt werden. "Farbjustage (Kalibrierung)" 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an.
(1) Öffnen Sie die Registerkarte [Farbjustage]. (2) Stellen Sie die Farben ein, indem Sie das [Vorschaubild] in der Mitte des Einstellrasters horizontal und vertikal verschieben.* Wenn sich das [Vorschaubild] in der Mitte befindet, wurde das Bild nicht eingestellt. Nach der Einstellung wird ein Musterbild in der [Vorschau] angezeigt. * Verschieben Sie das [Vorschaubild] mithilfe eines der folgenden Vorgänge.
09US-04R Abgleichen der Farbe mit dem Bildschirm Die Verfahren zum Einstellen der Farbe auf dem Bildschirm (RGB) und im Drucker (YMC) sind unterschiedlich. Daher stimmen die Farben eines Fotos oder Dokuments auf dem Bildschirm möglicherweise nicht mit denen auf dem Ausdruck überein. Mit der Farbabgleichfunktion zur Korrektur der Farben eines Ausdrucks können Sie die Farben des Ausdrucks besser an die Farben anpassen, die Sie auf dem Bildschirm sehen.
Verwenden der Abgleichfunktion zur Farbkorrektur Mit der Farbabgleichfunktion können Sie die Farben des Ausdrucks besser an die Farben anpassen, die Sie auf dem Bildschirm sehen. Farbkorrektur durch Einstellung der Helligkeit (Gammajustage) Sie können die Helligkeit der Druckergebnisse einstellen, ohne die hellsten und dunkelsten Teile der Bilddaten zu beeinträchtigen. Verwenden Sie diese Option, wenn das Druckergebnis heller ist als das Originalbild oder wenn Sie die Helligkeit des Bildes ändern möchten.
Informationen zu den Optionen für [Monitorprofil] Die auf Ihrem Computer registrierten Profile werden angezeigt. Informationen zu [Vorrang Anwendungsfarbabgleich] Wenn das Kontrollkästchen deaktiviert ist, können Sie den im Druckertreiber festgelegten Farbabgleichvorgang priorisieren. Wenn Sie den Farbabgleich in der Anwendung priorisieren möchten, aktivieren Sie das Kontrollkästchen. 3. Klicken Sie auf [OK].
3. Klicken Sie auf [OK]. Nähere Informationen zum allgemeinen Druckverfahren finden Sie im Abschnitt "Allgemeines Druckverfahren".
09US-04S Registrieren der Druckeinstellungen Ändern der Standardwerte für die Druckeinstellungen Ändern Sie die Standardwerte für die Druckeinstellungen so, dass sie für alle Daten gelten. Wenn Sie beispielsweise häufig einen Layoutdruck durchführen, müssen Sie die Einstellungen nicht für jeden Druckvorgang ändern, indem Sie die Standardwerte für [Seitenlayout] ändern.
09US-04U Ändern der Standardwerte für die Druckeinstellungen 1 Öffnen Sie den Druckerordner. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 2 Klicken Sie mit der rechten Maustaste auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü [Druckeinstellungen] aus. 3 Ändern Sie die Druckeinstellungen auf den Registerkarten [Seite einrichten], [Endverarbeitung], [Papierzufuhr] und [Qualität]. Die hier geänderten Einstellungen werden die Standardwerte.
4 Überprüfen Sie die Einstellungen, und klicken Sie dann auf [OK]. ĺ Der Druckerordner wird erneut angezeigt.
09US-04W Speichern von häufig verwendeten Druckeinstellungen (Hinzufügen/Bearbeiten/Löschen eines Profils) Hinzufügen eines Profils 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Geben Sie die Druckeinstellungen auf den Registerkarten [Seite einrichten], [Endverarbeitung], [Papierzufuhr] und [Qualität] an. Die hier angegebenen Einstellungen werden in Profilen registriert. Nähere Informationen zu den Einstellungen finden Sie in der Hilfe.
4 Geben Sie Informationen zu einem Profil an. [Name] Geben Sie den Namen für das Profil ein. Sie können bis zu 31 Zeichen eingeben. [Symbol] Sie können das Symbol für das Profil auswählen. [Kommentar] Geben Sie einen Kommentar für das Profil ein. Sie können bis zu 255 Zeichen eingeben. [Einstellungen anzeigen] Zeigen Sie das Dialogfeld [Einstellungen anzeigen] an. Sie können die aktuellen Druckertreibereinstellungen überprüfen. 5 Klicken Sie auf [OK], um das Profil zu registrieren.
Wenn Sie nicht auf [Bearb.] klicken können "Profile können nicht ausgewählt oder bearbeitet werden" 3 Bearbeiten Sie die Informationen zu einem Profil. Nähere Informationen zu den Einstellungen finden Sie in der Hilfe. "Informationen zur Verwendung der Hilfe" 4 Klicken Sie auf [OK]. ĺ Der Einstellungsdialog des Druckertreibers wird erneut angezeigt. Löschen eines hinzugefügten Profils 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an.
Wenn Sie nicht auf [Bearb.] klicken können "Profile können nicht ausgewählt oder bearbeitet werden" 3 Löschen Sie ein Profil. (1) Wählen Sie ein Profil aus, das Sie löschen möchten. (2) Klicken Sie auf [Löschen]. Sie können die Standardprofile oder ein Profil, das im Einstellungsdialog des Druckertreibers gerade ausgewählt ist, nicht löschen. (3) Klicken Sie auf [Ja]. 4 Klicken Sie auf [OK]. ĺ Der Einstellungsdialog des Druckertreibers wird erneut angezeigt.
09US-04X Auswählen eines Profils 1 Zeigen Sie den Einstellungsdialog des Druckertreibers an. "Anzeigen des Einstellungsdialogs" 2 Wählen Sie ein Profil aus. Wenn Sie den Druckernamen ändern, können Sie keine hinzugefügten Profile verwenden. Wenn Sie ein hinzugefügtes Profil verwenden möchten, ändern Sie den Druckernamen in seinen vorherigen Namen.
09US-04Y Konfigurieren der Netzwerkeinstellungen (Freigeben des Druckers) Überprüfen Ihrer Druckumgebung Wenn Sie den Drucker über die direkte Verbindung verwenden Netzwerk-Grundeinstellungen Ändern der Netzwerkeinstellungen für den Drucker Überprüfen der IP-Adresse des Druckers Überprüfen der MAC-Adresse des Druckers Überprüfen der Wireless-LAN-Informationen (nur LBP7110Cw) Konfigurieren und Ändern des Anschlusses Wenn Sie den Drucker in der Druckserverumgebung verwenden Konfigurieren des Druckservers
09US-050 Überprüfen Ihrer Druckumgebung Wenn der Drucker von mehreren Computern gemeinsam verwendet wird, hängt die Vorgehensweise bei der Konfiguration von der Umgebung ab. Wenn Sie den Drucker über die direkte Verbindung verwenden Wenn Sie den Drucker in der Druckserverumgebung verwenden Wenn Sie einen der Computer in einem Netzwerk als Druckserver einrichten, können Sie den Drucker folgendermaßen effizient verwalten.
09US-051 Wenn Sie den Drucker über die direkte Verbindung verwenden Sie können diesen Drucker über eine direkte Verbindung mit einem Netzwerk verwenden. Da der Drucker so konfiguriert ist, dass er die IP-Adresse automatisch beziehen kann, lässt sich das Netzwerk ohne spezielle Einstellungen verwenden, und Sie können die Netzwerkeinstellungen zur Anpassung an Ihre Umgebung ändern.
"Konfigurieren und Ändern des Anschlusses" Wenn Sie nicht wissen, welcher Anschluss verwendet wird, lesen Sie den Abschnitt "Grundlagen und andere Informationen zur Vorgehensweise unter Windows".
09US-052 Netzwerk-Grundeinstellungen Bevor Sie den Drucker im Netzwerk verwenden, müssen die Einstellungen des Computers und der Netzwerkgeräte vervollständigt werden. Wenn die Einstellungen nicht abgeschlossen sind, können Sie den Drucker im Netzwerk nicht verwenden. Weitere Einzelheiten finden Sie im Benutzerhandbuch Ihres Netzwerkgeräts, oder wenden Sie sich an den entsprechenden Hersteller.
09US-053 Umschalten zwischen Wireless-LAN- und kabelgebundener LANVerbindung (nur LBP7110Cw) Standardmäßig wird die kabelgebundene LAN-Verbindung verwendet. Umschalten von kabelgebundenem LAN auf Wireless-LAN Gehen Sie folgendermaßen vor. 1. Wenn der Druckertreiber installiert ist, deinstallieren Sie ihn. "Deinstallieren des Druckertreibers" 2.
zu installieren.
09US-054 Festlegen der Anschlusseinstellungen Verwenden Sie "MF/LBP Network Setup Tool" zur Festlegung der Netzwerkanschlusseinstellungen. "MF/LBP Network Setup Tool direkt starten" Näheres zu den Systemanforderungen des "MF/LBP Network Setup Tools" finden Sie im Abschnitt "MF/LBP Network Setup Tool". Wenn Sie den Druckertreiber mittels "Einfache Installation" installieren, startet das "MF/LBP Network Setup Tools" automatisch.
Sie können die IP-Adresse auch mit dem ARP/PING-Befehl über die Eingabeaufforderung festlegen.
09US-055 Einstellen eines Anschlusses und Installieren des Druckertreibers Das Installationsverfahren variiert je nach Betriebssystem. Wählen Sie die Methode entsprechend Ihrem Betriebssystem. Windows Vista, 7 und Server 2008 Windows XP und Server 2003 Es wird empfohlen, dass der Druckertreiber normalerweise mittels "Einfache Installation" von der mitgelieferten CDROM (Setup CD-ROM) installiert wird.
6 Erstellen Sie einen Anschluss. (1) Wählen Sie [Neuen Anschluss erstellen] aus. (2) Wählen Sie [Standard TCP/IP Port] aus. (3) Klicken Sie auf [Weiter]. 7 Geben Sie die IP-Adresse oder den Namen des Druckers ein. (1) Wählen Sie [Automatische Erkennung] oder [TCP/IP-Gerät] aus. (2) Geben Sie in [Hostname oder IP-Adresse] die IP-Adresse oder den Namen* des Druckers ein.
Wenn Sie sich über den für [Hostname oder IP-Adresse] einzugebenden Wert nicht sicher sind Der einzugebende Wert hängt davon ab, wie die IP-Adresse des Druckers festgelegt wurde. Nähere Informationen finden Sie im Abschnitt "Grundlagen und andere Informationen zur Vorgehensweise unter Windows", oder wenden Sie sich an Ihren Netzwerkadministrator.
10 Öffnen Sie den Ordner, der den Druckertreiber enthält. Für ein 32-Bit-Betriebssystem Öffnen Sie die Ordner auf der mitgelieferten CD-ROM: [German] - [32bit] - [Driver]. Für ein 64-Bit-Betriebssystem Öffnen Sie die Ordner auf der mitgelieferten CD-ROM: [German] - [x64] - [Driver]. Wenn Sie sich nicht sicher sind, ob Sie ein 32-Bit-Betriebssystem oder ein 64-BitBetriebssystem verwenden "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 11 Öffnen Sie die INF-Datei.
14 Geben Sie den Druckernamen an. (1) Wenn Sie den Druckernamen ändern möchten, geben Sie einen neuen Namen ein. Wenn [Als Standarddrucker festlegen] angezeigt wird, wählen Sie aus, ob der Drucker als Standarddrucker verwendet werden soll. (Windows Vista und Server 2008) (2) Klicken Sie auf [Weiter]. ĺ Die Installation wird gestartet. Warten Sie, bis der folgende Dialog nicht mehr angezeigt wird. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen].
15 Wenn der folgende Dialog angezeigt wird, wählen Sie aus, ob der Drucker freigegeben werden soll. (1) Wählen Sie aus, ob der Drucker freigegeben werden soll (ob der Computer, auf dem der Druckertreiber installiert wird, als Druckserver verwendet werden soll). Nähere Informationen zur Druckerfreigabe (Druckserverumgebung) finden Sie im Abschnitt "Wenn Sie den Drucker in der Druckserverumgebung verwenden". Wenn Sie den Drucker freigeben, geben Sie [Freigabename], [Standort] oder [Kommentar] nach Bedarf an.
HINWEIS Wenn Sie die IP-Adresse nach der Installation des Druckertreibers geändert haben Wenn Sie den Druckertreiber nach diesem Verfahren installieren, wird der standardmäßige TCP/IP-Anschluss erstellt. Wenn die IP-Adresse des Druckers bei Verwendung des standardmäßigen TCP/IP-Anschlusses geändert wird, muss auch der vom Druckertreiber zu verwendende Anschluss geändert werden.
6 Geben Sie den Typ des zu verwendenden Druckers an. (1) Wählen Sie [Lokaler Drucker, der an den Computer angeschlossen ist] aus. (2) Deaktivieren Sie das Kontrollkästchen [Plug & Play-Drucker automatisch ermitteln und installieren]. (3) Klicken Sie auf [Weiter]. 7 Erstellen Sie einen Anschluss. (1) Wählen Sie [Einen neuen Anschluss erstellen] aus. (2) Wählen Sie [Standard TCP/IP Port] aus. (3) Klicken Sie auf [Weiter]. 8 Klicken Sie auf [Weiter].
9 Geben Sie die IP-Adresse oder den Namen des Druckers ein. (1) Geben Sie in [Druckername oder -IP-Adresse] ([Druckername oder IP-Adresse] für Windows 2000) die IP-Adresse oder den Namen* des Druckers ein. * Der auf dem DNS-Server zu registrierende DNS-Name (bis zu 78 Zeichen) (2) Klicken Sie auf [Weiter].
11 Klicken Sie auf [Datenträger]. 12 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein, und klicken Sie dann auf [Durchsuchen]. Wenn die CD-ROM-Installation angezeigt wird, klicken Sie auf [Beenden]. 13 Öffnen Sie den Ordner, der den Druckertreiber enthält. Für ein 32-Bit-Betriebssystem Öffnen Sie die Ordner auf der mitgelieferten CD-ROM: [German] - [32bit] - [Driver].
(1) Wählen Sie die INF-Datei aus. (2) Klicken Sie auf [Öffnen]. 15 Klicken Sie auf [OK]. 16 Klicken Sie auf [Weiter]. 17 Geben Sie den Druckernamen an. (1) Wenn Sie den Druckernamen ändern möchten, geben Sie einen neuen Namen ein. Wenn die Meldung angezeigt wird, wählen Sie [Ja] oder [Nein] aus. (2) Klicken Sie auf [Weiter].
18 Klicken Sie auf [Weiter]. HINWEIS Wenn Sie den Drucker freigeben (wenn der Computer, auf dem der Druckertreiber installiert ist, als Druckserver verwendet wird) Nähere Informationen zur Druckerfreigabe (Druckserverumgebung) finden Sie im Abschnitt "Wenn Sie den Drucker in der Druckserverumgebung verwenden". Gehen Sie folgendermaßen vor. 1. Wählen Sie [Freigabename] aus, und geben Sie einen Namen für den freigegebenen Drucker ein. 2. Klicken Sie auf [Weiter]. 3.
20 Klicken Sie auf [Fertig stellen]. ĺ Die Installation wird gestartet. Warten Sie, bis der folgende Dialog nicht mehr angezeigt wird. Wenn der folgende Dialog nicht mehr angezeigt wird, können Sie die CD-ROM aus dem Laufwerk nehmen. Wenn die Installation abgeschlossen ist, wird ein Symbol für diesen Drucker erstellt. "Nach der Installation" Wenn Sie die Netzwerkeinstellungen für den Drucker ändern möchten, lesen Sie im Abschnitt "Ändern der Netzwerkeinstellungen für den Drucker" nach.
09US-056 Ändern der Netzwerkeinstellungen für den Drucker Konfigurieren der Protokolleinstellungen Einstellungen IPv4 Einstellungen IPv6 Weitere Protokolleinstellungen Festlegen eines dedizierten Anschlusses Festlegen der Wartezeit bis zur Verbindung mit dem Netzwerk Festlegen des kabelgebundenen LAN-Kommunikationsmodus und der Übertragungsgeschwindigkeit HINWEIS Wenn die Elemente für die Druckerverwaltung (wie beispielsweise das Manager-Passwort) eingestellt werden "Verwalten des Druckers" Wenn die E
09US-057 Konfigurieren der Protokolleinstellungen Lesen Sie vor dem Angeben der Einstellungen den Abschnitt "Achtung (Protokolleinstellungen)". 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen TCP/IP] an. (1) Wählen Sie [Netzwerkeinstellungen] aus. (2) Klicken Sie auf [Einstellungen TCP/IP].
4 Konfigurieren Sie die Protokolleinstellungen. Das Einstellverfahren variiert je nach den Einstellungen. Wählen Sie das geeignete Verfahren entsprechend den Einstellungen.
09US-058 Achtung (Protokolleinstellungen) Wenn die IP-Adresse (IPv4) festgelegt wird HINWEIS Wenn Sie die IP-Adresse nach der Installation des Druckertreibers geändert haben Wenn Sie den MFNP-Anschluss verwenden, braucht der Anschluss nicht geändert zu werden, weil eine neue IP-Adresse automatisch erkannt wird, wenn sich Drucker und Computer im selben Teilnetz befinden. Wenn Sie den standardmäßigen TCP/IP-Anschluss verwenden, sollte der vom Druckertreiber zu verwendende Anschluss geändert werden.
Link-lokale Adresse 1 Da die Adresse nur innerhalb des gleichen Präfixes gültig ist, kann sie den Router nicht passieren. Eine link-lokale Adresse für diesen Drucker wird jedes Mal festgelegt, wenn IPv6 verwendet wird. 0 bis 1 Dies ist eine feste Adresse, die manuell eingegeben wird. Wenn die IP-Adresse manuell festgelegt wird, können Sie die Präfixlänge und die standardmäßige Routeradresse angeben.
Mit der Funktion Multicast Discovery können Sie mithilfe von SLP (Service Location Protocol) aus der Dienstprogrammsoftware nur nach den Geräten suchen, deren Werte in [Scope Name] bestätigt sind.
09US-059 Einstellungen IPv4 Nähere Informationen zur Vorgehensweise vor dem Anzeigen der Seite [Einstellungen TCP/IP] (die Vorgehensweise vor Schritt 1) finden Sie im Abschnitt "Konfigurieren der Protokolleinstellungen". 1 Klicken Sie in [Einstellungen IPv4] auf [Bearbeiten]. 2 Legen Sie die IP-Adresse fest. Wenn die IP-Adresse automatisch bezogen wird Verwenden Sie DHCP, BOOTP, RARP oder Auto IP, um die IP-Adresse automatisch zu beziehen.
[Protokoll wählen] [Aus] Eine IP-Adresse, die RARP, BOOTP oder DHCP verwendet, kann nicht automatisch bezogen werden. [DHCP] Bezieht eine IP-Adresse über DHCP. (Der DHCP-Server muss aktiv sein.) [BOOTP] Bezieht eine IP-Adresse über BOOTP. (Der BOOTP-Daemon muss aktiv sein.) [RARP] Bezieht eine IP-Adresse über RARP. (Der RARP-Daemon muss aktiv sein.) [Auto IP] [Aus] Eine IP-Adresse, die Auto IP verwendet, kann nicht automatisch bezogen werden. [Ein] Der Drucker bezieht die IP-Adresse automatisch.
[Hostname] zu 47 alphanumerische Einzel-Byte-Zeichen eingeben. [Domänname] Geben Sie den Namen der Domäne ein, zu der der Drucker gehört. Sie können bis zu 47 alphanumerische Einzel-Byte-Zeichen eingeben. Eingabebeispiel: "example.com" [DNS Dynamisches Update] Zur Verwendung der Funktion "Dynamische Aktualisierung von DNS" aktivieren Sie das Kontrollkästchen. [Zeit DNS Dynamisches Update] Legen Sie das Intervall zur Durchführung der dynamischen Aktualisierungen fest. 4 Legen Sie die mDNS fest.
[Hostnamen übernehmen] Um den Hostnamen vom DHCP-Server zu beziehen, aktivieren Sie das Kontrollkästchen. [DNS Dynamisches Update] Um den Hostnamen dynamisch zu aktualisieren, aktivieren Sie das Kontrollkästchen. 6 Klicken Sie auf [OK]. 7 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
㻞㻡㻤㻌㻛㻌㻡㻞㻠
09US-05A Einstellungen IPv6 Legen Sie die Einstellungen IPv6 nach Festlegung der Einstellungen IPv4 fest. Nähere Informationen zur Vorgehensweise vor dem Auswählen der Einstellungen (die Vorgehensweise vor Schritt 1) finden Sie im Abschnitt "Konfigurieren der Protokolleinstellungen". 1 Klicken Sie in [Einstellungen IPv6] auf [Bearbeiten]. 2 Aktivieren Sie das Kontrollkästchen [IPv6].
3 Legen Sie die zustandslose Adresse fest. Fahren Sie mit Schritt 4 fort, wenn die zustandslose Adresse nicht verwendet wird. [Zustandslose Adresse] Zur Verwendung einer zustandslosen Adresse aktivieren Sie das Kontrollkästchen. 4 Legen Sie die manuelle Adresse fest. Fahren Sie mit Schritt 5 fort, wenn die manuelle Adresse nicht verwendet wird. [Manuelle Adresse] Zur Verwendung einer manuellen Adresse aktivieren Sie das Kontrollkästchen. [IP-Adresse] Geben Sie die IP-Adresse des Druckers ein.
[Adresse Standardrouter] Geben Sie die standardmäßige Router-Adresse nach Bedarf ein. WICHTIG Adressen, die in [IP-Adresse] und [Adresse Standardrouter] nicht eingegeben werden können Adressen, die mit "ff" (Multicast-Adressen) beginnen "::1" (Loopback-Adressen) 5 Legen Sie die DHCPv6 fest. Fahren Sie mit Schritt 6 fort, wenn DHCPv6 nicht verwendet wird. [DHCPv6 verwenden] Zur Verwendung von DHCPv6 aktivieren Sie das Kontrollkästchen. 6 Legen Sie die DNS fest.
[Adresse primärer DNS Server] Geben Sie die IP-Adresse des primären DNS-Servers ein. [Adresse sekundärer DNS Server] Geben Sie die IP-Adresse des sekundären DNS-Servers ein. [IPv4 Host/Domännamen verwenden] Zur Verwendung desselben Namens wie IPv4 aktivieren Sie das Kontrollkästchen. [Hostname] Geben Sie den Hostnamen ein, der dem DNS-Server hinzugefügt werden soll. Sie können bis zu 47 alphanumerische Einzel-Byte-Zeichen eingeben.
[mDNS verwenden] Zur Verwendung der mDNS-Einstellungen aktivieren Sie das Kontrollkästchen. [IPv4-Name für mDNS verwenden] Zur Verwendung desselben Namens wie IPv4 aktivieren Sie das Kontrollkästchen. [Name mDNS] Geben Sie den mDNS-Namen ein, wenn das Kontrollkästchen [IPv4-Name für mDNS verwenden] nicht aktiviert wird. 8 Klicken Sie auf [OK]. 9 Starten Sie den Drucker neu.
ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
09US-05C Weitere Protokolleinstellungen Nähere Informationen zur Vorgehensweise vor dem Anzeigen der Seite [Einstellungen TCP/IP] (die Vorgehensweise vor Schritt 1) finden Sie im Abschnitt "Konfigurieren der Protokolleinstellungen". Nähere Informationen zu den SSL-Einstellungen finden Sie im Abschnitt "Einstellen der SSL-verschlüsselten Kommunikationsfunktion". 1 Klicken Sie auf [Bearbeiten] für die Option, die Sie festlegen möchten. 2 Geben Sie jede Einstellung an.
[WINS Auflösung] [WINS Serveradresse] Zur Verwendung der WINS-Auflösung aktivieren Sie das Kontrollkästchen. Geben Sie die IP-Adresse des WINS-Servers ein. Geben Sie die Scope ID ein. Sie können bis zu 63 alphanumerische Einzel-Byte-Zeichen eingeben. [Scope ID] Die Scope ID ist eine Kennung, die zur Bestimmung des Bereichs für die Verwendung der Geräte und des Computers benutzt wird. Der Verweis auf die Scope ID erfolgt unabhängig von der Einstellung der WINS-Auflösung.
[LPD Druck verwenden] Zur Verwendung des LPD-Drucks aktivieren Sie das Kontrollkästchen. Fahren Sie mit Schritt 3 fort, wenn Sie für die anderen Optionen keine Einstellungen eingeben wollen. Einstellungen NetBIOS (1) Legen Sie die Einstellungen für NetBIOS fest. (2) Klicken Sie auf [OK]. [Name NetBIOS] Geben Sie den NetBIOS-Namen des Druckers ein. [Name Workgroup] Geben Sie den Namen der Arbeitsgruppe ein, zu der der Drucker gehört.
(1) Legen Sie die Einstellungen für den RAW-Druck fest. (2) Klicken Sie auf [OK]. [RAW Druck verwenden] Zur Verwendung des RAW-Drucks aktivieren Sie das Kontrollkästchen. Fahren Sie mit Schritt 3 fort, wenn Sie für die anderen Optionen keine Einstellungen eingeben wollen. Einstellungen WSD Wenn Sie den Drucker mit einem Netzwerkanschluss verwenden möchten, wenden Sie für den Druckvorgang den Anschluss MFNP oder den Standard TCP/IP Anschluss an. (1) Geben Sie die Einstellungen für WSD an.
verwenden] [Multicast Discovery verwenden] (Falls das Kontrollkästchen [WSD Drucken verwenden] aktiviert ist, wird das Kontrollkästchen [WSD Browsen verwenden] automatisch aktiviert und Sie können es nicht deaktivieren.) Aktivieren Sie das Kontrollkästchen, um über Multicast auf Suchbefehle zu antworten. Fahren Sie mit Schritt 3 fort, wenn Sie für die anderen Optionen keine Einstellungen eingeben wollen. Einstellungen Multicast Discovery (1) Legen Sie die Multicast Discovery-Einstellungen fest.
[LPD] Geben Sie die LPD-Anschlussnummer ein. [RAW] Geben Sie die RAW-Anschlussnummer ein. [HTTP] Geben Sie die HTTP-Anschlussnummer ein. [SNMP] Geben Sie die SNMP-Anschlussnummer ein. [WSD Multicast Discovery] Geben Sie die WSD Multicast Discovery Anschlussnummer ein. [Multicast Discovery] Geben Sie die Multicast Discovery (SLP)-Anschlussnummer ein. Fahren Sie mit Schritt 3 fort, wenn Sie für die anderen Optionen keine Einstellungen eingeben wollen.
Einstellungen SNTP (1) Legen Sie die Einstellungen für SNTP fest. (2) Klicken Sie auf [OK]. Wenn Sie die SNTP-Client-Funktion verwenden, um Zeitinformationen vom NTP-Server (öffentlicher Zeitinformationsserver im Internet) zu beziehen, aktivieren Sie das Kontrollkästchen. [SNTP verwenden] Wenn Zeitinformationen vom NTP-Server bezogen werden, stellen Sie sicher, dass die korrekten Einstellungen für die Zeitzone und die Sommerzeit festgelegt werden.
Durch Klicken auf [NTP Serververbindung prüfen] wird die Kommunikation mit dem in [NTP Serveradresse] festgelegten NTP-Server initiiert und das Kommunikationsergebnis wird in [Prüfergebnis NTP Serververbindung] wie folgt angezeigt.
09US-05E Festlegen eines dedizierten Anschlusses Legen Sie die Einstellungen für den dedizierten Anschluss fest, die bei der Kommunikation mit dem Computer verwendet werden. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen zugewiesener Port] an. (1) Wählen Sie [Netzwerkeinstellungen] aus. (2) Klicken Sie auf [Einstellungen zugewiesener Port].
4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie die dedizierten Anschlusseinstellungen fest. (1) Legen Sie die dedizierten Anschlusseinstellungen fest. (2) Klicken Sie auf [OK].
Zur Aktivierung eines dedizierten Anschlusses aktivieren Sie das Kontrollkästchen. [Zugewiesenen Port aktivieren] Wenn ein dedizierter Anschluss nicht verwendet wird (das Kontrollkästchen ist deaktiviert), können die Druckerinformationen nicht bezogen werden, wenn Sie den Druckertreiber oder das Modul Printer Status Window über eine Netzwerkverbindung verwenden. 6 Starten Sie den Drucker neu.
09US-05F Festlegen der Wartezeit bis zur Verbindung mit dem Netzwerk Legen Sie die Wartezeit zwischen dem Einschalten des Druckers und der Verbindung des Druckers mit dem Netzwerk fest. HINWEIS Wenn der Drucker an einen Schalt-Hub angeschlossen ist Auch wenn die Netzwerkeinstellungen korrekt sind, kann sich der Drucker möglicherweise nicht mit dem Netzwerk verbinden.
4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie die Wartezeit bis zur Verbindung mit dem Netzwerk fest. (1) Legen Sie die Wartezeit fest. (2) Klicken Sie auf [OK].
[Wartezeit] Geben Sie die Wartezeit zwischen dem Einschalten des Druckers und der Verbindung des Druckers mit dem Netzwerk ein. 6 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
09US-05H Festlegen des kabelgebundenen LAN-Kommunikationsmodus und der Übertragungsgeschwindigkeit Legen Sie die Einstellungen für den Kommunikationsmodus und die Übertragungsgeschwindigkeit (Ethernettyp) des kabelgebundenen LAN fest. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen Ethernettreiber] an. (1) Wählen Sie [Netzwerkeinstellungen] aus.
4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie den Kommunikationsmodus und die Übertragungsgeschwindigkeit (Ethernettyp) des kabelgebundenen LAN fest. (1) Legen Sie die Ethernet-Treibereinstellungen fest. (2) Klicken Sie auf [OK].
Wenn der Kommunikationsmodus und die Übertragungsgeschwindigkeit automatisch bezogen werden [Automatische Erkennung] Aktivieren Sie das Kontrollkästchen. Wenn der Kommunikationsmodus und die Übertragungsgeschwindigkeit manuell bezogen werden [Automatische Erkennung] Deaktivieren Sie das Kontrollkästchen. [Kommunikationsmodus] Wählen Sie den Kommunikationsmodus, der Ihrer Netzwerkumgebung entspricht. [Halbduplex] Senden und Empfangen werden nicht gleichzeitig, sondern abwechselnd durchgeführt.
09US-05J Überprüfen der IP-Adresse des Druckers In diesem Abschnitt wird das Verfahren zur Überprüfung der IP-Adresse von IPv4 mithilfe der Taste WEITER am Drucker zum Ausdrucken der "User Data List" erläutert. Sie können auch den Netzwerkstatusbericht über das Modul Printer Status Window ausdrucken und überprüfen. Zur Überprüfung der IP-Adresse von IPv6 verwenden Sie den Netzwerkstatusbericht. "Überprüfen der Druckereinstellungen" 1 Drucken Sie die "User Data List" aus.
09US-05K Überprüfen der MAC-Adresse des Druckers In diesem Abschnitt wird das Verfahren zur Überprüfung der MAC-Adresse des Druckers mithilfe der Taste WEITER am Drucker zum Ausdrucken der "User Data List" erläutert. Sie können auch das folgende Verfahren zur Überprüfung der MAC-Adresse verwenden.
09US-05L Überprüfen der Wireless-LAN-Informationen (nur LBP7110Cw) In diesem Abschnitt wird das Verfahren zur Überprüfung der Wireless-LAN-Informationen mithilfe von Remote UI erläutert. Sie können auch das folgende Verfahren zur Überprüfung der Wireless-LAN-Informationen verwenden.
4 Überprüfen Sie die Wireless-LAN-Informationen. [MAC-Adresse] Zeigt die MAC-Adresse des Druckers an (Wireless-LAN). [Status Wireless LAN] Zeigt den Verbindungsstatus (Signalstärke) des Wireless-LAN an. [Letzte Fehlerinformationen] Zeigt die letzten Fehlerinformationen an, wenn die Wireless-LAN-Verbindung fehlschlägt. [Kanal] Zeigt den Wireless-LAN-Kanal an, der verwendet wird. [Einstellungen SSID] Zeigt die SSID des Zugangspunkts an, die eingestellt wurde.
WPA/WPA2-PSK] [Einstellungen WEP] Zeigt die WEP-Einstellung an.
09US-05R Konfigurieren und Ändern des Anschlusses Gehen Sie folgendermaßen vor, um den Anschluss manuell zu konfigurieren oder zu ändern. Wie Sie die Anschlusskonfiguration (Druckprotokoll) verändern können, finden Sie im Abschnitt "Ändern der Anschlusskonfiguration". 1 Öffnen Sie den Druckerordner.
4 Wählen Sie den Anschlusstyp aus. (1) Wählen Sie [Canon MFNP Port] oder [Standard TCP/IP Port]. (2) Klicken Sie auf [Neuer Anschluss]. Dieser Anschluss kann die IP-Adresse des Druckers automatisch erkennen. Selbst wenn sich die IP-Adresse des Druckers ändert, braucht der Anschluss nicht geändert zu werden, weil eine neue IP-Adresse automatisch erkannt wird, wenn sich Drucker und Computer im selben Subnetz befinden. [Canon MFNP Port] MFNP Port unterstützt nur IPv4. (Er unterstützt nicht IPv6.
Geben Sie die IP-Adresse oder MAC-Adresse des Druckers ein. Wenn Sie sich über die IP-Adresse oder die MAC-Adresse des Druckers nicht sicher sind, lesen Sie den Abschnitt "Überprüfen der IP-Adresse des Druckers" oder "Überprüfen der MAC-Adresse des Druckers". 2. Klicken Sie auf [Weiter]. 3. Klicken Sie auf [Hinzufügen]. 4. Klicken Sie auf [Fertigstellen]. 5. Fahren Sie mit Schritt 6 fort.
Wenn der Standard TCP/IP Port konfiguriert wird 1. Klicken Sie auf [Weiter]. 2. Geben Sie die IP-Adresse oder den Namen des Druckers ein. (1) Geben Sie die neue IP-Adresse oder den Namen* des Druckers ein. * Der auf dem DNS-Server zu registrierende DNS-Name (bis zu 78 Zeichen) (2) Klicken Sie auf [Weiter].
4. Fahren Sie mit Schritt 6 fort. 6 Klicken Sie auf [Schließen]. 7 Klicken Sie auf [Übernehmen]. 8 Klicken Sie auf [OK].
HINWEIS Wenn die Anschlusskonfiguration (Druckprotokoll) geändert wird "Ändern der Anschlusskonfiguration" Wenn ein nicht erforderlicher Anschluss gelöscht wird Wählen Sie auf der Registerkarte [Anschlüsse] den zu löschenden Anschluss aus, und klicken Sie dann auf [Löschen].
09US-05S Ändern der Anschlusskonfiguration Verwenden Sie das folgende Verfahren, um die Anschlusskonfiguration (Druckprotokoll) zu ändern. 1 Öffnen Sie den Druckerordner. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 2 Rechtsklicken Sie auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü die Option [Druckereigenschaften] oder [Eigenschaften] aus. 3 Gehen Sie folgendermaßen vor. (1) Zeigen Sie die Registerkarte [Anschlüsse] an.
(1) Konfigurieren Sie die Druckprotokolleinstellungen. (2) Klicken Sie auf [OK]. Für MFNP-Anschluss [Protokolltyp] Wählen Sie das Druckprotokoll (RAW oder LPR). [Anschlussnummer] Geben Sie die Anschlussnummer des im Drucker konfigurierten Druckprotokolls ein. Für standardmäßigen TCP/IP-Anschluss [Protokoll] Wählen Sie das Druckprotokoll (RAW oder LPR). [Raw-Einstellungen] Geben Sie die Anschlussnummer des im Drucker konfigurierten RAW-Protokolls in [Portnummer] ein.
㻞㻥㻡㻌㻛㻌㻡㻞㻠
09US-05U Wenn Sie den Drucker in der Druckserverumgebung verwenden Wenn Sie den Drucker in der Druckserverumgebung verwenden, können Sie Druckvorgänge von anderen Computern (Clients) durchführen, die nicht direkt mit diesem Drucker verbunden sind. Der direkt mit dem Drucker verbundene Computer wird "Druckserver" genannt, während die übrigen Computer, die den Drucker über den Druckserver verwenden, "Clients" genannt werden.
"Installieren über den Druckerordner" "Installieren über [Windows-Explorer]" HINWEIS Vorsichtsmaßnahmen beim Download und der Installation des Druckertreibers Wenn auf dem Druckserver ein 64-Bit-Betriebssystem aktiv ist, wird die Download-Installation für einen Client-Computer, auf dem eines der folgenden 32-Bit-Betriebssysteme aktiv ist, aufgrund der Windows-Einschränkung nicht unterstützt.
09US-05W Konfigurieren des Druckservers Überprüfen Sie vor dem Konfigurieren des Druckservers die Einstellungen Ihrer Netzwerkumgebung. "Überprüfen der Einstellungen Ihres Netzwerks" 1 Öffnen Sie den Druckerordner. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" 2 Zeigen Sie die Registerkarte [Freigabe] an. Klicken Sie mit der rechten Maustaste auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü [Freigabe] aus. 1.
Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird, klicken Sie auf [Fortsetzen]. Gehen Sie nun folgendermaßen vor, um den zusätzlichen Treiber zu installieren. 4 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein, und klicken Sie dann auf [Zusätzliche Treiber]. Wenn die CD-ROM-Installation angezeigt wird, klicken Sie auf [Beenden]. HINWEIS Wenn ein zusätzlicher Treiber (Ersatztreiber) aktualisiert wird Gehen Sie folgendermaßen vor. 1.
(2) Klicken Sie auf [OK]. * Wählen Sie den zusätzlichen Treiber entsprechend dem Betriebssystem auf dem Druckserver folgendermaßen aus. Druckserver Auszuwählender zusätzlicher Treiber 32-Bit-Betriebssystem Aktivieren Sie das Kontrollkästchen [x64]. 64-Bit-Betriebssystem (Windows XP und Server 2003) Aktivieren Sie in der Spalte [Version] das Kontrollkästchen [Windows 2000, Windows XP und Windows Server 2003] ([Windows 2000, Windows XP and Windows Server 2003] für Windows XP).
Öffnen Sie die INF-Datei. (1) Wählen Sie die INF-Datei aus. (2) Klicken Sie auf [Öffnen]. 9 Klicken Sie auf [OK], um die Installation des zusätzlichen Treibers zu starten. ĺ Warten Sie einen Moment, bis die Registerkarte [Freigabe] automatisch erneut angezeigt wird. (Die Installation des zusätzlichen Treibers kann einige Zeit dauern.) Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja]. 10 Klicken Sie auf [Schließen] oder [OK].
ĺ [Status] oder Druckersymbol ändern sich auf die für Freigabeeinstellungen. WICHTIG So löschen Sie die Einstellungen für die Druckerfreigabe Gehen Sie folgendermaßen vor, um die Einstellungen zu löschen. Wählen Sie auf der Registerkarte [Freigabe] die Option [Drucker nicht freigeben] aus. Deaktivieren Sie auf der Registerkarte [Freigabe] das Kontrollkästchen [Drucker freigeben]. Wenn [Freigabeoptionen ändern] angezeigt wird, klicken Sie auf [Freigabeoptionen ändern].
09US-05X Überprüfen der Einstellungen Ihres Netzwerks Überprüfen Sie vor dem Konfigurieren des Druckservers die Einstellungen Ihrer Netzwerkumgebung folgendermaßen. 1 Gehen Sie folgendermaßen vor.
Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen]. 3 Vergewissern Sie sich, dass [Datei- und Druckerfreigabe für Microsoft-Netzwerke] ausgewählt ist. (1) Vergewissern Sie sich, dass das Kontrollkästchen [Datei- und Druckerfreigabe für Microsoft-Netzwerke] aktiviert ist. (Wenn das Kontrollkästchen nicht aktiviert ist, aktivieren Sie es.) (2) Klicken Sie auf [OK].
09US-05Y Installation auf Clients Es gibt zwei Möglichkeiten, den Druckertreiber auf Client-Computern zu installieren: die lokale Installation und die Download-Installation. Lokale Installation Sie können den Druckertreiber von der mitgelieferten CD-ROM installieren. Die e-Anleitung wird ebenfalls installiert, wenn "Einfache Installation" ausgewählt wird.
09US-060 Installieren über den Druckerordner Das Verfahren zur Installation des Druckertreibers über den Druckerordner variiert abhängig von Ihrem Betriebssystem. Lesen Sie einen der folgenden Abschnitte entsprechend Ihrem Betriebssystem. Windows Vista, 7 und Server 2008 Windows XP und Server 2003 Windows Vista, 7 und Server 2008 1 Schalten Sie den Computer ein, und melden Sie sich unter Windows an. 2 Öffnen Sie den Druckerordner.
5 Klicken Sie auf [Der gesuchte Drucker ist nicht aufgeführt.]. 6 Gehen Sie folgendermaßen vor. (1) Wählen Sie [Freigegebenen Drucker über den Namen auswählen] aus. (2) Klicken Sie auf [Weiter]. 7 Wählen Sie einen freigegebenen Drucker aus.
(1) Wählen Sie einen freigegebenen Drucker auf dem Druckserver aus. (2) Klicken Sie auf [Auswählen]. HINWEIS Direkte Festlegung des Netzwerkpfads Legen Sie den Netzwerkpfad mit "\\Druckservername (der Computername des Druckservers)\Druckername" fest. 8 Klicken Sie auf [Treiber installieren]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen]. 9 Klicken Sie auf [Weiter].
10 Klicken Sie auf [Fertig stellen]. Wenn Sie eine Testseite drucken möchten, klicken Sie auf [Testseite drucken]. Wenn [Als Standarddrucker festlegen] angezeigt wird, wählen Sie aus, ob der Drucker als Standarddrucker verwendet werden soll. (Windows 7 und Server 2008 R2) Windows XP und Server 2003 1 Schalten Sie den Computer ein, und melden Sie sich unter Windows an. 2 Öffnen Sie den Druckerordner.
4 Klicken Sie auf [Weiter]. 5 Wählen Sie einen Druckertyp aus. (1) Wählen Sie [Netzwerkdrucker oder Drucker, der an einen anderen Computer angeschlossen ist] aus. (2) Klicken Sie auf [Weiter]. 6 Gehen Sie folgendermaßen vor. (1) Wählen Sie [Verbindung mit folgendem Drucker herstellen] aus. (2) Klicken Sie auf [Weiter].
7 Wählen Sie einen freigegebenen Drucker aus. (1) Wählen Sie einen freigegebenen Drucker auf dem Druckserver aus. (2) Klicken Sie auf [Weiter]. Wenn das Dialogfeld [Druckerverbindung herstellen] angezeigt wird Folgen Sie den Anleitungen in der Meldung. HINWEIS Direkte Festlegung des Netzwerkpfads Legen Sie den Netzwerkpfad mit "\\Druckservername (der Computername des Druckservers)\Druckername" fest.
9 Klicken Sie auf [Fertig stellen].
09US-061 Installieren über [Windows-Explorer] 1 Schalten Sie den Computer ein, und melden Sie sich unter Windows an. 2 Zeigen Sie [Windows-Explorer] an. :lKOHQ 6LH DXV GHP 0HQ >6WDUW@ GLH 2SWLRQ >$OOH 3URJUDPPH@ ĺ >=XEHK|U@ ĺ >:LQGRZV ([SORUHU@ 3 Gehen Sie folgendermaßen vor. (1) Wählen Sie den Druckserver unter [Netzwerkumgebung] oder [Netzwerk] aus. (2) Doppelklicken Sie auf das Symbol für den freigegebenen Drucker, oder ziehen Sie das Symbol, und legen Sie es im Druckerordner ab.
09US-062 Verwalten des Druckers Software für die Verwaltung des Druckers Remote UI MF/LBP Network Setup Tool Verwalten von Druckaufträgen Überprüfen der Druckereinstellungen Drucken der "User Data List" Festlegen der Information Systemmanager Festlegen des Gerätenamens und des Installationsortes Festlegen der Einstellungen für die Zeitzone und die Sommerzeit des Druckers Initialisieren der Systemeinstellungen Initialisieren über Remote UI Initialisieren über die Rückstelltaste 㻟㻝㻠㻌㻛㻌㻡㻞㻠
09US-063 Software für die Verwaltung des Druckers Sie können den Drucker mit der folgenden Software verwalten. Welche Aktionen Sie verwalten können, hängt von der Software ab. Verwenden Sie daher die für die Umgebung oder zu verwaltende Aktion geeignete Software.
09US-064 Remote UI Mit Remote UI können Sie den Drucker über einen Web-Browser verwalten. Es wird keine spezielle Software benötigt. Remote UI kann über einen Web-Browser gesteuert werden. Sie benötigen zur Steuerung von Remote UI keine spezielle Software. Sie können den Drucker von einem entfernten Ort verwalten. Durch Zugriff auf den Drucker über einen Web-Browser in einem Netzwerk können Sie den Drucker mithilfe eines Computers an einem entfernten Ort verwalten.
09US-065 Starten von Remote UI Es gibt die folgenden zwei Möglichkeiten, Remote UI zu starten. Starten von Remote UI über das Statusfenster des Druckers Starten von Remote UI direkt über einen Web-Browser Lesen Sie vor dem Starten von Remote UI den Abschnitt "Achtung (Remote UI)". Starten von Remote UI über das Statusfenster des Druckers 1 Klicken Sie im Windows-Taskfach auf [ ], und wählen Sie dann den Druckernamen. 2 Klicken Sie auf [ Wenn Sie [ ] (Remote UI).
Wählen Sie diesen Modus, wenn Sie sich als Manager anmelden. [Modus Verwaltung] Sie können alle Vorgänge durchführen und alle Einstellungen von Remote UI festlegen. Bei Auswahl von [Modus Verwaltung] geben Sie die PIN ein. [Systemmanager PIN] Wenn keine PIN festgelegt wurde, müssen Sie sie nicht eingeben. "Festlegen der Information Systemmanager" Wählen Sie diesen Modus, wenn Sie sich als normaler Anwender anmelden.
Wenn Remote UI nicht gestartet wird Überprüfen Sie die folgenden Punkte. Der Drucker und Computer sind über ein Netzwerk ordnungsgemäß verbunden. Der Drucker ist eingeschaltet. Die IP-Adresse oder ["Hostname"."Domänenname"] wurde korrekt eingegeben. 3 Melden Sie sich bei Remote UI an. (1) Wählen Sie den Anmeldemodus. (2) Klicken Sie auf [Login]. Wählen Sie diesen Modus, wenn Sie sich als Manager anmelden.
09US-066 Achtung (Remote UI) HINWEIS Wenn SSL-verschlüsselte Kommunikation verwendet wird Um die SSL-verschlüsselte Kommunikation zu verwenden, muss ein Schlüssel und ein Zertifikat erstellt werden, und der Schlüssel muss als Standardschlüssel registriert werden.
09US-067 Bildschirmanordnung von Remote UI Portalseite Der folgende beim Anmelden an Remote UI angezeigte Bildschirm wird als "Portalseite" bezeichnet. (1) Bringt die Informationen auf der derzeit angezeigten Seite auf den neuesten Stand. (2) Zeigt den aktuellen Status des Druckers und die Fehlerinformation an. Zeigt den Link zu der Fehlerinformation an, wenn ein Fehler auftritt. (3) Zeigt auf Papier und verbleibenden Toner bezogene Informationen an.
(1) Zeigen Sie die folgenden Seiten an. [Auftragsstatus] Seite Sie können Aufträge, die gerade gedruckt werden oder auf die Druckausgabe warten, anzeigen und abbrechen. "Verwalten von Druckaufträgen" [Auftragslog] Seite Zeigt den Verlauf der Aufträge an. "Verwalten von Druckaufträgen" Zeigt Fehlerinformationen zum Drucker an.
(1) Zeigen Sie die folgenden Seiten an. [Einstellungen Anzeige] Seite Zeigt an/ändert die Informationen zu den Einstellungen für die Sprachanzeige von Remote UI. "Ändern der Anzeigensprache von Remote UI" [Timereinstellungen] Seite Zeigt an/ändert die Informationen zu den Einstellungen für die Zeitzone und die Sommerzeit des Druckers.
Wenn Sie sich über [Modus Endanwender] anmelden, wird nur die Seite [Systemeinstellungen] angezeigt. Sie können die Einstellungen nur ändern, wenn Sie sich über [Modus Verwaltung] anmelden.
09US-068 Anzeigen oder Ändern des Support-Links Mit Remote UI können Sie den Link zur Website festlegen, auf der Informationen zu dem Support des Druckers verfügbar sind, und Sie können dann bei Bedarf von Remote UI auf diese Website zugreifen. Wenn Sie sich als Modus Verwaltung angemeldet haben, können Sie die Link-Einstellungen ändern. Anzeigen des Support-Links 1 Starten Sie Remote UI, und melden Sie sich dann an.
2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Systemeinstellungen bearbeiten] an. (1) Wählen Sie [Systemeinstellungen] aus. (2) Klicken Sie auf [Bearbeiten]. 4 Ändern Sie den Link. (1) Geben Sie die URL (Adresse) des Links in [Support Link] unter [Geräteinformationen] ein.
(2) Klicken Sie auf [OK].
09US-069 Ändern der Anzeigensprache von Remote UI Wenn Sie sich als Modus Verwaltung angemeldet haben, können Sie die angezeigte Sprache von Remote UI ändern. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen Anzeige bearbeiten] an. (1) Wählen Sie [Einstellungen Anzeige] aus. (2) Klicken Sie auf [Bearbeiten].
4 Ändern Sie die Anzeigensprache. (1) Wählen Sie eine Anzeigensprache aus. (2) Klicken Sie auf [OK].
09US-06A MF/LBP Network Setup Tool Sie können "MF/LBP Network Setup Tool" verwenden, um die Netzwerkeinstellungen zu initialisieren. Einfache Navigation durch die Einstellverfahren Sie können mithilfe von grafischen Anzeigen des Assistenten einfach durch die Einstellverfahren navigieren. Keine Installation erforderlich Bei "MF/LBP Network Setup Tool" handelt es sich um eine Software auf der mitgelieferten CD-ROM.
Systemanforderungen für "MF/LBP Network Setup Tool" Betriebssystem Windows Windows Windows Windows Windows Windows Windows XP Professional oder Home Edition XP Professional x64 Edition Vista (32-Bit- oder 64-Bit-Version) 7 (32-Bit oder 64-Bit-Version) Server 2003 Server 2003 x64 Edition Server 2008 (32-Bit- oder 64-Bit-Version) Die neuesten Informationen zu "MF/LBP Network Setup Tools" finden Sie auf der Canon-Website (http://www.canon.com/).
09US-06C MF/LBP Network Setup Tool direkt starten 1 Schalten Sie den Computer ein, und melden Sie sich dann unter Windows als Benutzer mit Administratorrechten an. 2 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. 3 Klicken Sie auf [Zusätzliche Software-Programme].
㻟㻟㻟㻌㻛㻌㻡㻞㻠
09US-06E Verwalten von Druckaufträgen Mithilfe von Remote UI können Sie Aufträge, die gerade gedruckt werden oder auf die Druckausgabe warten, anzeigen und abbrechen, oder Druckprotokolle überprüfen. Sie können Druckaufträge auch mithilfe einer anderen Methode als Remote UI abbrechen. "Abbrechen eines Auftrags" Überprüfen/Abbrechen eines Auftrags, der gerade gedruckt wird oder auf die Druckausgabe wartet 1 Starten Sie Remote UI, und melden Sie sich dann an.
4 Um einen Auftrag abzubrechen, klicken Sie für den abzubrechenden Auftrag auf [Abbrechen]. Wenn Sie einen Auftrag nicht abbrechen können Sie können einen Auftrag, dessen Seiten sich im Druckprozess befinden, nicht abbrechen. Überprüfen des Druckprotokolls 1 Starten Sie Remote UI, und melden Sie sich dann an.
2 Klicken Sie auf [Status Monitor/Abbruch]. 3 Wählen Sie [Auftragslog] aus. HINWEIS Druckprotokolle Bis zu 50 Aufträge können angezeigt werden. Wenn die Anzahl der Aufträge 50 überschreitet, werden die Druckprotokolle beginnend mit dem ältesten Eintrag automatisch gelöscht.
09US-06F Überprüfen der Druckereinstellungen Wenn Sie den Statusbericht drucken, können Sie u. a. den Druckerstatus und die Netzwerkeinstellungen überprüfen. Der Statusbericht ist so konzipiert, dass er auf A4-Papier gedruckt wird. Verwenden Sie unbedingt A4-Papier. Sie können die Netzwerkeinstellungen usw. auch anhand des folgenden Ablaufs überprüfen.
Wenn der Statusbericht nicht gedruckt wird "Der "Der "Der "Der Druckvorgang Druckvorgang Druckvorgang Druckvorgang kann kann kann kann nicht nicht nicht nicht durchgeführt durchgeführt durchgeführt durchgeführt werden werden werden werden (USB-Verbindung)" (Wired LAN Verbindung)" (Wireless LAN Verbindung) (nur LBP7110Cw)" (über den Druckserver)" 㻟㻟㻤㻌㻛㻌㻡㻞㻠
09US-06H Drucken der "User Data List" Sie können die Netzwerkeinstellungen usw. überprüfen, indem Sie die "User Data List" ausdrucken. Die "User Data List" ist so konzipiert, dass sie auf A4-Papier gedruckt wird. Verwenden Sie unbedingt A4-Papier. 1 Legen Sie A4-Papier in die Papierkassette ein. "Einlegen von Papier" 2 Vergewissern Sie sich, dass die Anzeigen am Drucker wie folgt sind. Die Anzeige Die Anzeige (Auftrag) ist ausgeschaltet. (Bereit) leuchtet oder blinkt.
09US-06J Festlegen der Information Systemmanager Legen Sie das Manager-Passwort (PIN) und die Manager-Informationen des Druckers fest. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Systemeinstellungen bearbeiten] an. (1) Wählen Sie [Systemeinstellungen] aus. (2) Klicken Sie auf [Bearbeiten].
4 Legen Sie die Information Systemmanager fest. (1) Legen Sie das Manager-Passwort (PIN) und die Manager-Informationen des Druckers fest. (2) Klicken Sie auf [OK]. [PIN einstellen/ ändern] Um eine PIN festzulegen, aktivieren Sie das Kontrollkästchen. [PIN] Geben Sie eine neue, gewünschte PIN ein. [Bestätigen] Um eine PIN zu bestätigen, geben Sie die PIN noch einmal ein. [Systemmanager] Geben Sie den Namen des Systemmanagers ein.
HINWEIS Einstellen der PIN Sie können eine Zahl mit bis zu 7 Stellen eingeben. Wenn Sie weniger als 7 Stellen eingeben : :HQQ 6LH HLQJHEHQ ĺ ZLUG HLQJHVWHOOW Wenn Sie eine Zahl eingeben, die mit "0" beginnt : :HQQ 6LH RGHU HLQJHEHQ ĺ ZLUG HLQJHVWHOOW Eine PIN, die nur aus Nullen besteht, wie beispielsweise "00", kann nicht registriert werden.
09US-06K Festlegen des Gerätenamens und des Installationsortes Legen Sie den Druckernamen, den Installationsort usw. fest. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Systemeinstellungen bearbeiten] an. (1) Wählen Sie [Systemeinstellungen] aus. (2) Klicken Sie auf [Bearbeiten].
4 Legen Sie die Geräteinformationen fest. (1) Legen Sie den Druckernamen, den Installationsort usw. fest. (2) Klicken Sie auf [OK]. [Gerätename] Geben Sie den Druckernamen ein. [Aufstellort] Geben Sie den Installationsort des Druckers ein. Geben Sie die URL (Adresse) des Support-Links ein. [Support Link] Nähere Informationen zum Support-Link finden Sie im Abschnitt "Anzeigen oder Ändern des Support-Links".
㻟㻠㻡㻌㻛㻌㻡㻞㻠
09US-06L Festlegen der Einstellungen für die Zeitzone und die Sommerzeit des Druckers Legen Sie die Zeitzone der Region fest, in der der Drucker installiert wird, und geben Sie an, ob die Sommerzeit verwendet werden soll. Die Standardzeit der jeweiligen Region wird als Zeitunterschied (bis zu ± 12 Stunden) in Bezug auf die koordinierte Universalzeit (UTC) angegeben. Eine Zeitzone ist eine Region, in der die gleiche Standardzeit gilt.
4 Legen Sie die Einstellungen für die Zeitzone und die Sommerzeit fest. (1) Legen Sie die Zeitzone der Region fest, in der der Drucker installiert wird, und geben Sie an, ob die Sommerzeit verwendet werden soll. (2) Klicken Sie auf [OK]. Wählen Sie die Zeitzone der Region, in der der Drucker verwendet wird. [Einstellungen Zeitzone] [Sommerzeit verwenden] Wählen Sie für die Zeitzone den Zeitunterschied von der koordinierten Universalzeit (UTC).
09US-06R Initialisieren der Systemeinstellungen Sie können die folgenden Einstellinformationen über Remote UI oder die Rückstelltaste initialisieren (auf die Standardwerte zurücksetzen). Information Systemmanager*1 Geräteinformationen *2 Sicherheitseinstellungen Netzwerkeinstellungen *1 Wenn Sie die Rückstelltaste verwenden, wird [Systemmanager] nicht initialisiert. *2 Wenn Sie die Rückstelltaste verwenden, wird [Gerätename] und [Aufstellort] nicht initialisiert.
09US-06S Initialisieren über Remote UI Sie können die folgenden Einstellinformationen einzeln oder alle auf einmal initialisieren (auf die Standardwerte zurücksetzen). Information Systemmanager Geräteinformationen Sicherheitseinstellungen Netzwerkeinstellungen 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Systemeinstellungen initialisieren] an.
4 Initialisieren Sie die Systemeinstellungen. (1) Wählen Sie die zu initialisierenden Einstellinformation aus. (2) Klicken Sie auf [Initialisieren]. 5 Durch Klicken auf [OK] wird die ausgewählte Einstellinformation initialisiert.
6 Starten Sie den Drucker nach der Initialisierung der Netzwerkeinstellungen neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers ist die Initialisierung abgeschlossen.
09US-06U Initialisieren über die Rückstelltaste Sie können die folgenden Einstellinformationen alle auf einmal initialisieren (auf die Standardwerte zurücksetzen). Information Systemmanager*1 Geräteinformationen *2 Sicherheitseinstellungen Netzwerkeinstellungen *1 [Systemmanager] wird nicht initialisiert. *2 [Gerätename] und [Aufstellort] werden nicht initialisiert. 1 Schalten Sie den Drucker aus. ĺ Vergewissern Sie sich, dass die Hauptnetzanzeige ausgeschaltet ist.
09US-06W Sicherheitseinstellungen Einschränken der Benutzer, die drucken und Einstellungen festlegen können Überwachen/Steuern von Geräten über SNMP (SNMP-Einstellungen) Festlegen von Schlüsseln und Zertifikaten/CA-Zertifikaten Erstellen von Schlüsseln und Zertifikaten Installieren von Schlüsseln und Zertifikaten/CA-Zertifikaten Überprüfen der Schlüssel und Zertifikate/CA-Zertifikate Löschen von Schlüsseln und Zertifikaten/CA-Zertifikaten Einstellen der SSL-verschlüsselten Kommunikationsfunktion Einst
09US-06X Einschränken der Benutzer, die drucken und Einstellungen festlegen können Sie können die Benutzer einschränken, die drucken und Einstellungen festlegen können (Benutzer, die Daten senden/empfangen können), und zwar anhand ihrer IP-Adressen und MAC-Adressen. Einschränkung auf der Basis von IP-Adressen Einschränkung auf der Basis von MAC-Adressen HINWEIS Wenn eingeschränkte Benutzer versuchen zu drucken Die Meldung erscheint im Modul Printer Status Window.
4 Klicken Sie auf [Bearbeiten] in dem Filter, den Sie festlegen möchten. [IPv4-Adresse: SE Filter] Beschränkt die Datenübertragung vom Drucker auf der Basis von festgelegten IPv4Adressen. [IPv4-Adresse: EM Filter] Beschränkt den Datenempfang des Druckers auf der Basis von festgelegten IPv4Adressen. [IPv6-Adresse: SE Filter] Beschränkt die Datenübertragung vom Drucker auf der Basis von festgelegten IPv6Adressen.
5 Aktivieren Sie das Kontrollkästchen [Filter verwenden]. 6 Wählen Sie [Standardrichtlinie] aus. [Zurückweisen] Schränkt die Datenübertragung an oder den Datenempfang von anderen als den in [AusnahmeAdressen] festgelegten IP-Adressen ein. (Nur die in [Ausnahme-Adressen] festgelegten IP-Adressen sind für die Übertragung oder den Empfang verfügbar.) [Zulassen] Ermöglicht die Datenübertragung an oder den Datenempfang von anderen als den in [Ausnahme-Adressen] festgelegten IP-Adressen.
7 Legen Sie die IP-Ausnahmeadresse für [Standardrichtlinie] fest. (1) Geben Sie die IP-Ausnahmeadresse für die in [Standardrichtlinie] (siehe Schritt 6) ausgewählte Regel ein. (2) Klicken Sie auf [Hinzufügen]. Spezifikationsmethode Eingabemethode Eingabebeispiel Einzelne Adresse Geben Sie die IP-Adresse ein, und trennen Sie dabei die Zahlen durch Punkte (.). 192.168.0.
Mehrere Adressen Präfixadresse kleinsten Zahl und der Adresse mit der größten Zahl ein. Diese Einstellung legt den Bereich der IP-Adressen fest, die ausgenommen werden sollen. Diese Einstellung ist nützlich, wenn Sie eine Serie von Adressen gleichzeitig festlegen möchten. Um ein Präfix (0 bis 128) festzulegen, setzen Sie einen Schrägstrich (/) zwischen der Präfixadresse und der Präfixlänge ein. Diese Einstellung legt das Präfix fest, welches ausgenommen werden soll.
9 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert. Einschränkung auf der Basis von MAC-Adressen 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung].
3 Zeigen Sie die Seite [MAC-Adressfilter] an. (1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [MAC-Adressfilter]. 4 Klicken Sie auf [Bearbeiten] in dem Filter, den Sie festlegen möchten.
[SE Filter] Schränkt die Datenübertragung vom Drucker ein. [EM Filter] Schränkt den Datenempfang des Druckers ein. (Nachfolgend wird der Ablauf für den Bildschirm [SE Filter] als Beispiel erläutert.) 5 Aktivieren Sie das Kontrollkästchen [Filter verwenden]. 6 Wählen Sie [Standardrichtlinie] aus.
[Zurückweisen] Schränkt die Datenübertragung an oder den Datenempfang von anderen als den in [AusnahmeAdressen] festgelegten MAC-Adressen ein. (Nur die in [Ausnahme-Adressen] festgelegten MAC-Adressen sind für die Übertragung oder den Empfang verfügbar.) [Zulassen] Ermöglicht die Datenübertragung an oder den Datenempfang von anderen als den in [Ausnahme-Adressen] festgelegten MAC-Adressen. (Nur die MAC-Adressen sind eingeschränkt, die in [Ausnahme-Adressen] festgelegt sind.
HINWEIS Wenn eine eingerichtete MAC-Adresse gelöscht werden soll (1) Wählen Sie eine MAC-Adresse aus, die gelöscht werden soll. (2) Klicken Sie auf [Löschen]. 8 Klicken Sie auf [OK].
9 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
09US-06Y Überwachen/Steuern von Geräten über SNMP (SNMP-Einstellungen) Sie können den Drucker mithilfe von SNMP-Supportgeräten, wie beispielsweise an Netzwerken angeschlossene Computer, überwachen und steuern. Dieser Drucker unterstützt SNMPv1 und SNMPv3 mit erweiterten Sicherheits- und Authentifizierungsfunktionen. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung].
4 Klicken Sie auf [Bearbeiten]. 5 Konfigurieren Sie das SNMPv1-Protokoll.
[SNMPv1 verwenden] Zur Verwendung des SNMPv1-Protokolls aktivieren Sie das Kontrollkästchen. [Abteilungsname 1] Geben Sie einen SNMPv1-Community-Namen ein. Sie können bis zu 32 alphanumerische Einzel-Byte-Zeichen eingeben. Die Standardvorgabe lautet [public]. [MIB Zugangserlaubnis 1] Legen Sie die MIB-Zugriffsrechte von [Abteilungsname 1] fest. Wenn Lesen und Schreiben erlaubt sind, können Sie auf den Drucker von einem Computer im Netzwerk aus zugreifen und Einstellungen ändern.
[SNMPv3 verwenden] Zur Verwendung des SNMPv3-Protokolls aktivieren Sie das Kontrollkästchen. [Anwendereinstellungen 1]/[Anwendereinstellungen 2]/[Anwendereinstellungen 3] [Anwender aktivieren] Aktivieren Sie das Kontrollkästchen, wenn Sie Benutzerinformationen registrieren/bearbeiten oder registrierte Benutzerinformationen aktivieren möchten. [Anwendername] Geben Sie den Benutzernamen ein, der für das SNMPv3-Protokoll verwendet werden soll.
MD5 wird verwendet. [SHA1] SHA1 wird verwendet. [Algorithmus Authentisierung] So richten Sie ein oder ändern Sie das Authentifizierungspasswort Aktivieren Sie das Kontrollkästchen [Passwort einstellen/ändern], und geben Sie dann das Passwort in [Passwort Authentisierung] und [Bestätigen] ein. Sie können 6 bis 16 alphanumerische Einzel-Byte-Zeichen eingeben. Wählen Sie den Verschlüsselungsalgorithmus. [DES] DES wird verwendet. [AES] AES wird verwendet.
9 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
09US-070 Festlegen von Schlüsseln und Zertifikaten/CA-Zertifikaten Sie müssen Schlüssel und Zertifikate registrieren, um die SSL-verschlüsselte Kommunikation zu verwenden. Sie müssen Schlüssel und Zertifikate oder CA-Zertifikate registrieren, um die IEEE 802.1X-Authentifizierung durchzuführen. Das Verfahren für die Registrierung von Schlüsseln und Zertifikaten/CA-Zertifikaten hängt von der Systemumgebung ab. Befolgen Sie das Registrierverfahren gemäß Ihrer Umgebung.
09US-071 Erstellen von Schlüsseln und Zertifikaten Erstellen Sie einen Schlüssel und ein Serverzertifikat (selbstsigniertes Zertifikat) am Drucker. 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen Schlüssel und Zertifikat] an. (1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [Einstellungen Schlüssel und Zertifikat].
4 Klicken Sie auf [Schlüssel generieren]. 5 Legen Sie einen zu erstellenden Schlüssel fest.
[Schlüsselname] Legen Sie den Namen des Verschlüsselungsschlüssels fest. Sie können bis zu 24 alphanumerische Einzel-Byte-Zeichen eingeben. [Signaturalgorithmus] Wählen Sie den Signaturalgorithmus. [Schlüsselalgorithmus] Wählen Sie den Schlüsselalgorithmus. HINWEIS Informationen zum Schlüsselerzeugungsalgorithmus Der Algorithmus zur Erzeugung eines neuen Schlüssels an diesem Drucker ist RSA.
[Startdatum Gültigkeit] Legen Sie das Datum fest, an dem die Gültigkeit des Zertifikats beginnt. Geben Sie das Datum ein (1. Januar 2000 bis 31. Dezember 2037). [Enddatum Gültigkeit] Legen Sie das Datum fest, an dem die Gültigkeit des Zertifikats endet. Geben Sie das Datum ein (1. Januar 2000 bis 31. Dezember 2037). Legen Sie das Land/die Region fest.
09US-072 Installieren von Schlüsseln und Zertifikaten/CA-Zertifikaten Installieren Sie die in einem Computer gespeicherten Schlüssel und Zertifikate (PKCS#12-Format) oder CA-Zertifikate (X.509-Format) im Drucker. Ein CA-Zertifikat ist im Drucker standardmäßig installiert. Installieren von Schlüsseln und Zertifikaten Installieren des CA-Zertifikats Installieren von Schlüsseln und Zertifikaten 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an.
4 Klicken Sie auf [Schlüssel und Zertifikat speichern]. 5 Klicken Sie auf [Installieren].
WICHTIG Informationen zur Anzahl der installierbaren Schlüssel- und Zertifikatsdateien Nur eine Datei kann installiert werden. Wenn eine Schlüssel- und Zertifikatsdatei bereits installiert ist, klicken Sie auf [Löschen], und löschen Sie dann die installierte Datei. 6 Klicken Sie auf [Durchsuchen], und wählen Sie dann eine zu installierende Schlüssel- und Zertifikatsdatei. 7 Klicken Sie auf [Installation starten].
8 Klicken Sie auf [Speichern]. 9 Geben Sie das Privatschlüsselpasswort der installierten Schlüssel- und Zertifikatsdatei ein. (1) Geben Sie [Schlüsselname] und [Passwort] ein. Sie können bis zu 24 alphanumerische Zeichen eingeben. (2) Klicken Sie auf [OK].
Installieren des CA-Zertifikats 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen CA Zertifikat] an.
(1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [Einstellungen CA Zertifikat]. 4 Klicken Sie auf [CA Zertifikat speichern]. 5 Klicken Sie auf [Installieren].
WICHTIG Informationen zur Anzahl der installierbaren CA-Zertifikatsdateien Nur eine Datei kann installiert werden. Wenn eine CA-Zertifikatsdatei bereits installiert ist, klicken Sie auf [Löschen], und löschen Sie dann die installierte Datei. 6 Klicken Sie auf [Durchsuchen], und wählen Sie dann eine zu installierende CA-Zertifikatsdatei. 7 Klicken Sie auf [Installation starten].
8 Klicken Sie auf [Speichern].
09US-073 Überprüfen der Schlüssel und Zertifikate/CA-Zertifikate Sie können den Inhalt der Schlüssel und Zertifikate oder CA-Zertifikate überprüfen und verifizieren, ob das Zertifikat korrekt registriert ist. Überprüfen von Schlüsseln und Zertifikaten Überprüfen der CA-Zertifikate Überprüfen von Schlüsseln und Zertifikaten 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung].
4 Klicken Sie auf [ ] (Zertifikat) des zu überprüfenden Schlüssels. 5 Wenn Sie das Zertifikat verifizieren möchten, klicken Sie auf [Zertifikatsnachweis].
6 Überprüfen Sie das Verifizierergebnis, und klicken Sie dann auf [Zurück zu den Zertifikatdetails]. Überprüfen der CA-Zertifikate 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung].
3 Zeigen Sie die Seite [Einstellungen CA Zertifikat] an. (1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [Einstellungen CA Zertifikat]. 4 Klicken Sie auf [ ] (Zertifikat) des zu überprüfenden CA-Zertifikats.
5 Wenn Sie das Zertifikat verifizieren möchten, klicken Sie auf [Zertifikatsnachweis]. 6 Überprüfen Sie das Verifizierergebnis, und klicken Sie dann auf [Zurück zu den Zertifikatdetails].
㻟㻤㻥㻌㻛㻌㻡㻞㻠
09US-074 Löschen von Schlüsseln und Zertifikaten/CA-Zertifikaten Löschen Sie die erstellten oder installierten (registrierten) Schlüssel und Zertifikate/CA-Zertifikate. Löschen von Schlüsseln und Zertifikaten Löschen des CA-Zertifikats HINWEIS Informationen zur Initialisierung der Schlüssel und Zertifikate/CA-Zertifikate Sie können die Schlüssel und Zertifikate sowie CA-Zertifikate auf die Standardvorgabe zurücksetzen.
4 Klicken Sie auf [Löschen] für den zu löschenden Schlüssel bzw. das zu löschende Zertifikat. [Löschen] wird nicht angezeigt. [Löschen] wird für Schlüssel und Zertifikate, die bei SSL-verschlüsselten Kommunikation oder IEEE 802.1XAuthentifizierung verwendet werden, nicht angezeigt. 5 Klicken Sie auf [OK], um den Schlüssel oder das Zertifikat zu löschen.
Löschen des CA-Zertifikats 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an. "Starten von Remote UI" 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Zeigen Sie die Seite [Einstellungen CA Zertifikat] an. (1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [Einstellungen CA Zertifikat].
4 Klicken Sie auf [Löschen] für das zu löschende CA-Zertifikat. [Löschen] wird nicht angezeigt. [Löschen] wird für CA-Zertifikate, die bei IEEE 802.1X-Authentifizierung verwendet werden, nicht angezeigt. 5 Klicken Sie auf [OK], um das CA-Zertifikat zu löschen.
09US-075 Initialisieren von Schlüsseln und Zertifikaten/CA-Zertifikaten Stellen Sie den Schlüssel und das Zertifikat/CA-Zertifikat auf die folgenden Standardwerte zurück. Schlüssel und Zertifikat Keine (alle wurden gelöscht) CA-Zertifikat 1 (Standardmäßig vorinstalliertes CA-Zertifikat) WICHTIG Informationen zu SSL-verschlüsselten Kommunikation und IEEE 802.
4 Klicken Sie auf [Initialisieren]. 5 Klicken Sie auf [OK], um den Schlüssel und das Zertifikat/CA-Zertifikat zu initialisieren.
09US-076 Einstellen der SSL-verschlüsselten Kommunikationsfunktion Legen Sie die Einstellungen für die Verwendung der SSL-verschlüsselten Kommunikationsfunktion in diesem Drucker fest. Lesen Sie vor dem Angeben der Einstellungen den Abschnitt "Achtung (SSL-verschlüsselte Kommunikation)".
4 Klicken Sie in [Einstellungen SSL] auf [Schlüssel und Zertifikat]. 5 Legen Sie einen für die SSL-verschlüsselte Kommunikation zu verwendenden Schlüssel und das Zertifikat fest. (1) Wählen Sie den zu verwendenden Schlüssel aus einer Liste registrierter Schlüssel und Zertifikate aus. Wenn Sie auf [ ] (Zertifikat) klicken, können Sie die detaillierten Informationen zu den Zertifikaten prüfen und verifizieren.
Aktivieren der SSL-verschlüsselten Kommunikationsfunktion Legen Sie die Einstellungen zur Aktivierung der zu verwendenden SSL-verschlüsselten Kommunikationsfunktion fest, z. B. wenn Sie Remote UI verwenden. 1 Zeigen Sie die Seite [Einstellungen Remote UI] an. (1) Wählen Sie [Sicherheitseinstellungen] aus. (2) Klicken Sie auf [Einstellungen Remote UI]. 2 Klicken Sie auf [Bearbeiten].
3 Aktivieren Sie die SSL-verschlüsselte Kommunikationsfunktion. (1) Aktivieren Sie das Kontrollkästchen [SSL verwenden]. Bei Deaktivierung des Kontrollkästchens wird die SSL-verschlüsselte Kommunikationsfunktion deaktiviert. (2) Klicken Sie auf [OK]. 4 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
㻠㻜㻜㻌㻛㻌㻡㻞㻠
09US-077 Achtung (SSL-verschlüsselte Kommunikation) WICHTIG Wenn SSL-verschlüsselte Kommunikation verwendet wird Legen Sie die Zeitinformationen für den Drucker fest. Sie können die Zeitinformationen mithilfe einer der folgenden Methoden abfragen. Benachrichtigen des Druckers über die Zeitinformationen mithilfe des NTP-Servers (SNTP festlegen) "Weitere Protokolleinstellungen" Sie können den Drucker über die im Computer eingestellte Zeit benachrichtigen, indem Sie folgendermaßen vorgehen. 1.
09US-078 Einstellen der IEEE 802.1X-Authentifizierung Legen Sie verschiedene Protokolle (TLS, TTLS oder PEAP) für die IEEE 802.1X-Authentifizierung fest. Lesen Sie vor dem Angeben der Einstellungen den Abschnitt "Achtung (IEEE 802.1X-Authentifizierung)". Einstellen der TLS-Authentifizierungsinformationen Einstellen der TTLS/PEAP-Authentifizierungsinformationen Einstellen der TLS-Authentifizierungsinformationen Legen Sie die Authentifizierungsinformationen zur Verwendung von TLS während der IEEE 802.
(2) Klicken Sie auf [Einstellungen IEEE 802.1X]. 4 Klicken Sie auf [Bearbeiten]. 5 Aktivieren Sie das Kontrollkästchen [IEEE 802.1X verwenden].
6 Geben Sie einen Anmeldenamen ein. 7 Aktivieren Sie das Kontrollkästchen [TLS verwenden].
8 Klicken Sie auf [Schlüssel und Zertifikat]. 9 Legen Sie die für die Authentifizierung zu verwendenden Schlüssel und Zertifikate fest. (1) Wählen Sie den zu verwendenden Schlüssel aus einer Liste registrierter Schlüssel und Zertifikate aus. Wenn Sie auf [ ] (Zertifikat) klicken, können Sie die detaillierten Informationen zu den Zertifikaten prüfen und verifizieren. "Überprüfen der Schlüssel und Zertifikate/CA-Zertifikate" (2) Klicken Sie auf [Einstellungen Standardschlüssel].
10 Klicken Sie auf [OK]. 11 Starten Sie den Drucker neu. Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
Einstellen der TTLS/PEAP-Authentifizierungsinformationen Legen Sie die Authentifizierungsinformationen zur Verwendung von TTLS oder PEAP während der IEEE 802.1XAuthentifizierung fest. WICHTIG So legen Sie die TTLS/PEAP-Authentifizierung fest Sie müssen die SSL-verschlüsselte Kommunikationsfunktion festlegen. "Einstellen der SSL-verschlüsselten Kommunikationsfunktion" 1 Starten Sie Remote UI, und melden Sie sich dann als Modus Verwaltung an.
4 Klicken Sie auf [Bearbeiten]. 5 Aktivieren Sie das Kontrollkästchen [IEEE 802.1X verwenden].
6 Geben Sie einen Anmeldenamen ein. 7 Aktivieren Sie das Kontrollkästchen [TTLS verwenden] oder [PEAP verwenden]. Zur Verwendung von TTLS wählen Sie das interne TTLS-Protokoll ([MSCHAPv2] oder [PAP]).
8 Klicken Sie auf [Anwendername/Passwort ändern]. Zur Verwendung des in Schritt 6 für den Benutzernamen eingegebenen Anmeldenamens aktivieren Sie das Kontrollkästchen [Login-Name als Anwendername verwenden]. 9 Legen Sie den Benutzernamen und das Passwort fest. (1) Geben Sie einen Benutzernamen und ein Passwort ein. (2) Klicken Sie auf [OK].
[Anwendername] Geben Sie einen Benutzernamen ein. Sie können bis zu 24 alphanumerische Einzel-ByteZeichen eingeben. [Passwort ändern] Aktivieren Sie das Kontrollkästchen, wenn das Passwort geändert wird. [Passwort] Geben Sie ein Passwort ein. Sie können bis zu 24 alphanumerische Einzel-Byte-Zeichen eingeben. [Bestätigen] Um das eingegebene [Passwort] zu bestätigen, geben Sie es noch einmal ein. 10 Klicken Sie auf [OK]. 11 Starten Sie den Drucker neu.
ĺ Nach dem Neustart des Druckers sind die Einstellungen aktiviert.
09US-079 Achtung (IEEE 802.1X-Authentifizierung) WICHTIG Bedingungen zur Verwendung der IEEE 802.1X-Authentifizierung Bei diesem Drucker ist die IEEE 802.1X-Authentifizierung nur in kabelgebundenen LAN-Umgebungen verfügbar. Zur Verwendung der IEEE 802.1X-Authentifizierung benötigen Sie einen Authentifizierungsserver (RADIUS-Server). Wenn Sie die IEEE 802.1X-Authentifizierung verwenden Legen Sie die Zeitinformationen für den Drucker fest.
09US-07A Fehlersuche Probleme mit der Druckereinheit Der Druckvorgang kann nicht durchgeführt werden Der Drucker legt eine Pause während des Druckvorgangs ein und danach wird der Druckvorgang wiederholt gestartet und gestoppt.
09US-07C Der Druckvorgang kann nicht durchgeführt werden Die Maßnahmen für den Fall, dass ein Druckvorgang nicht durchgeführt werden kann, richten sich nach der Druckerumgebung. Lesen Sie die Informationen zu den Maßnahmen, die zu Ihrer Druckerumgebung passen.
09US-07E Der Druckvorgang kann nicht durchgeführt werden (USB-Verbindung) Wenn Sie nicht drucken können und der Drucker über ein USB-Kabel mit dem Computer verbunden ist, überprüfen Sie das Problem mithilfe der folgenden Fragen. Ist der Drucker eingeschaltet? (Leuchtet die Hauptnetzanzeige?) EIN Fahren Sie mit fort. AUS Schalten Sie den Drucker ein.
Angeschlossen Versuchen Sie Folgendes. Wenn Sie einen Hub verwenden, schließen Sie den Drucker direkt an den Computer an. Wenn Sie ein langes USB-Kabel verwenden, ersetzen Sie es durch ein kurzes. Wenn Sie ein anderes USB-Kabel zur Verfügung haben, verwenden Sie dieses. Wenn der Druckvorgang nicht ausgeführt wird, fahren Sie mit fort. Nicht angeschlossen Schließen Sie das Kabel korrekt an.
Nicht ausgewählt Wählen Sie den korrekten Anschluss aus. Der zu verwendende Anschluss kann nicht gefunden werden. Installieren Sie den Druckertreiber erneut. "Deinstallieren des Druckertreibers" "Installieren des Druckertreibers" Ist die bidirektionale Kommunikation aktiviert? "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Aktiviert Fahren Sie mit fort.
09US-07F Der Druckvorgang kann nicht durchgeführt werden (Wired LAN Verbindung) Wenn Sie beim Anschluss des Druckers am Computer über ein kabelgebundenes LAN nicht drucken können, überprüfen Sie das Problem mithilfe der folgenden Fragen. Ist der Drucker eingeschaltet? (Leuchtet die Hauptnetzanzeige?) EIN Fahren Sie mit fort. AUS Schalten Sie den Drucker ein.
Leuchtet die Anzeige (Wi-Fi) des Druckers? (nur LBP7110Cw) Leuchtet Der Drucker ist über Wireless-LAN angeschlossen. Wechseln Sie zu einer kabelgebundenen LAN-Verbindung. "Umschalten zwischen Wireless-LAN- und kabelgebundener LAN-Verbindung (nur LBP7110Cw)" Aus Fahren Sie mit fort. Kann sich der Computer mit dem Internet verbinden? Verbindung möglich Fahren Sie mit fort.
Angeschlossen Fahren Sie mit fort. Nicht angeschlossen Schließen Sie das Kabel korrekt an. "Verbinden des Druckers und Computers" Überprüfen Sie die Anzeigen an der Netzwerkschnittstelle. Die ACT-Anzeige leuchtet. Fahren Sie mit fort. Die Verbindungsanzeige (LNK) leuchtet. Alle Anzeigen sind aus.
"Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Festgelegt Fahren Sie mit fort. Nicht eingestellt Legen Sie die IP-Adresse korrekt fest. "Festlegen der Anschlusseinstellungen" Ist der zu verwendende Anschluss korrekt ausgewählt? "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Ausgewählt Fahren Sie mit fort. Nicht ausgewählt Wählen Sie den korrekten Anschluss aus. Der zu verwendende Anschluss kann nicht gefunden werden.
Installieren Sie den Druckertreiber erneut. "Deinstallieren des Druckertreibers" "Installieren des Druckertreibers" Wenn der Druckvorgang nicht ausgeführt wird, fahren Sie mit fort. Können Sie von einem anderen Computer drucken (Netzwerkverbindung)? Drucken möglich Deaktivieren Sie residente Software, einschließlich der Sicherheitssoftware. Drucken nicht möglich Wenden Sie sich an Ihren autorisierten Canon-Händler vor Ort.
09US-07H Der Druckvorgang kann nicht durchgeführt werden (Wireless LAN Verbindung) (nur LBP7110Cw) Wenn Sie beim Anschluss des Druckers am Computer über ein Wireless-LAN nicht drucken können, überprüfen Sie das Problem mithilfe der folgenden Fragen. Ist der Drucker eingeschaltet? (Leuchtet die Hauptnetzanzeige?) EIN Fahren Sie mit fort. AUS Schalten Sie den Drucker ein.
Leuchtet die Anzeige (Wi-Fi) des Druckers? Leuchtet Fahren Sie mit fort. Aus Der Drucker ist nicht über Wireless-LAN angeschlossen. Wechseln Sie zu einer Wireless-LAN-Verbindung. "Umschalten zwischen Wireless-LAN- und kabelgebundener LAN-Verbindung (nur LBP7110Cw)" Kann sich der Computer mit dem Internet verbinden? Verbindung möglich Fahren Sie mit fort. Vervollständigen Sie die Einstellungen des Computers und des Wireless-LANZugangspunkts.
Ja Fahren Sie mit fort. Nein Versetzen Sie die Geräte zu einem Standort, der diesen Bedingungen entspricht. Überprüfen Sie den Verbindungsstatus (Signalstärke) des Wireless-LAN. Überprüfen Sie den Verbindungsstatus (Signalstärke) unter [Wireless LAN Status] in der "User Data List". "Drucken der "User Data List"" [Very Good] : Die Signalstärke ist sehr gut. [Good] : Die Signalstärke ist gut. [Normal] : Die Signalstärke ist normal. [Bad] : Die Signalstärke ist schlecht.
Siehe "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" und überprüfen Sie die SSID des Computers. Ja Fahren Sie mit fort. Legen Sie die Einstellungen der Wireless-LAN-Verbindung erneut fest. "Festlegen der Anschlusseinstellungen" Beachten Sie die folgenden Punkte sorgfältig, wenn die Einstellungen erneut festgelegt werden.
Ausgewählt Fahren Sie mit fort. Nicht ausgewählt Wählen Sie den korrekten Anschluss aus. Der zu verwendende Anschluss kann nicht gefunden werden. Erstellen Sie einen Anschluss. "Konfigurieren und Ändern des Anschlusses" Für MFNP-Anschluss Fahren Sie mit fort. Der Anschluss braucht nicht geändert zu werden, weil eine neue IPAdresse automatisch erkannt wird, wenn sich Drucker und Computer im selben Teilnetz befinden. Die IP-Adresse wurde geändert.
09US-07J Der Druckvorgang kann nicht durchgeführt werden (über den Druckserver) Wenn Sie nicht drucken können, wenn der Drucker über den Druckserver verwendet wird, überprüfen Sie das Problem mithilfe der folgenden Fragen. Ist der Drucker eingeschaltet? (Leuchtet die Hauptnetzanzeige?) EIN Fahren Sie mit fort. AUS Schalten Sie den Drucker ein. Kann nicht eingeschaltet werden "Sie können den Drucker nicht einschalten" Überprüfen Sie die Anzeigen an der Druckereinheit.
Ist der Drucker korrekt an den Druckserver angeschlossen? Angeschlossen Fahren Sie mit fort. Nicht angeschlossen Schließen Sie das Kabel korrekt an. "Verbinden des Druckers und Computers" Kann Ihr Computer an den Druckserver oder den freigegebenen Drucker angeschlossen werden? Kann angeschlossen werden Kann nicht angeschlossen werden Fahren Sie mit fort.
Drucken möglich Überprüfen Sie die Druckeinstellungen in der Anwendung. Drucken nicht möglich Fahren Sie mit fort. Wird der Drucker auf dem Druckserver im Netzwerk angezeigt? "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Angezeigt Fahren Sie mit fort. Nicht angezeigt Wenden Sie sich mit diesem Problem an Ihren Netzwerkadministrator. Installieren Sie den Druckertreiber erneut.
09US-07K Der Druckserver für den Anschluss kann nicht gefunden werden Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Druckserver und Client-Computer sind nicht ordnungsgemäß verbunden. Abhilfe Verbinden Sie den Druckserver mit dem Client-Computer ordnungsgemäß. Der Druckserver wurde nicht gestartet. Abhilfe Starten Sie den Druckserver. Der Drucker ist nicht als freigegebener Drucker festgelegt.
09US-07L Auf den freigegebenen Drucker kann nicht zugegriffen werden Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Der Benutzer des zu verwendenden Computers ist nicht registriert, oder das Passwort wurde nicht eingestellt. Abhilfe Registrieren Sie den Benutzer des zu verwendenden Computers, oder geben Sie das Passwort auf dem Druckserver an. Nähere Informationen erhalten Sie von Ihrem Netzwerkadministrator. Der Pfad zum Netzwerk ist nicht korrekt.
09US-07R Der Drucker legt eine Pause während des Druckvorgangs ein und danach wird der Druckvorgang wiederholt gestartet und gestoppt. Gehen Sie folgendermaßen vor. Wenn der Drucker kontinuierlich über einen längeren Zeitraum verwendet wird, erhöht sich die Temperatur im Druckerinneren und aktiviert einen Sicherheitsmechanismus, der den Druckvorgang vorübergehend unterbricht. Abhilfe Warten Sie einen Augenblick. Nach Abkühlung des Druckerinneren wird der Druckvorgang wieder aufgenommen.
09US-07S Sie können den Drucker nicht einschalten Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Der Netzstecker wurde aus der Netzsteckdose gezogen. Abhilfe Stecken Sie den Netzstecker in die Netzsteckdose. Der Drucker ist an ein Verlängerungskabel oder eine Mehrfachsteckdose angeschlossen. Abhilfe Stecken Sie den Netzstecker direkt in die Netzsteckdose. Die Schutzschalter wurden ausgelöst.
09US-07U Alle Anzeigen an der Netzwerkschnittstelle sind aus Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Das LAN-Kabel ist nicht ordnungsgemäß angeschlossen oder gebrochen. Abhilfe 1 Trennen Sie das LAN-Kabel einmal ab, und schließen Sie es dann erneut an. Abhilfe 2 Ersetzen Sie das LAN-Kabel durch ein anderes LAN-Kabel, und schließen Sie es dann an. Das Kabel ist am UP-LINK (Kaskaden)-Anschluss des Hubs angeschlossen.
09US-07W Sie können den Druckertreiber nicht installieren Wenn während der Installation ein Problem auftritt Wählen Sie eines der folgenden Installationsprobleme aus.
09US-07X Der Drucker wird nicht automatisch erkannt Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Der Drucker ist nicht eingeschaltet. Abhilfe Schalten Sie den Drucker ein. Das USB-Kabel ist nicht ordnungsgemäß angeschlossen. Abhilfe Vergewissern Sie sich, dass der Drucker und Computer ordnungsgemäß über das USB-Kabel verbunden sind.
09US-07Y Nach dem Drucker kann nicht gesucht werden Wenn zum Zeitpunkt der Installation nach dem Drucker nicht gesucht werden kann (wenn keine Geräte in [Druckerliste] angezeigt werden), gehen Sie wie folgt vor. 1 Vergewissern Sie sich, dass Drucker und Computer ordnungsgemäß verbunden sind und der Drucker eingeschaltet ist. "Verbinden des Druckers und Computers" 2 Klicken Sie auf [Erneut suchen], um nach dem Drucker im Netzwerk erneut zu suchen.
3. Klicken Sie auf [Weiter]. 4. Legen Sie den Anschluss manuell über [Port] fest.
09US-080 Sie können den Druckertreiber nicht deinstallieren Gehen Sie folgendermaßen vor. Abhilfe 1 Starten Sie das Deinstallationsprogramm direkt von der mitgelieferten CDROM, und deinstallieren Sie dann den Druckertreiber. "Starten des Deinstallationsprogramms von der CD-ROM" "Deinstallieren des Druckertreibers" Abhilfe 2 (nur bei einer USB-Verbindung) Deinstallieren Sie den USB-Klasse-Treiber.
09US-081 Starten des Deinstallationsprogramms von der CD-ROM 1 Legen Sie die mitgelieferte CD-ROM "User Software" in das CD-ROM-Laufwerk Ihres Computers ein. Wenn der folgende Dialog angezeigt wird, klicken Sie auf [Ende]. Wenn das Dialogfeld [Automatische Wiedergabe] angezeigt wird Wählen Sie [Ordner öffnen, um Dateien anzuzeigen] aus, und fahren Sie dann mit Schritt 4 fort. 2 Zeigen Sie [Computer] oder [Arbeitsplatz] an.
4 Öffnen Sie den Ordner, der das Deinstallationsprogramm enthält. Für ein 32-Bit-Betriebssystem Öffnen Sie die Ordner [German] - [32bit] - [MISC]. Für ein 64-Bit-Betriebssystem Öffnen Sie die Ordner [German] - [x64] - [MISC].
5 Doppelklicken Sie auf [UNINSTAL.exe]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder auf [Fortsetzen]. Nähere Informationen zur Deinstallation finden Sie im Abschnitt "Deinstallieren des Druckertreibers".
09US-082 Deinstallieren des USB-Klasse-Treibers Deinstallieren Sie den USB-Klasse-Treiber unter den folgenden Umständen. Wenn der über eine USB-Verbindung installierte Druckertreiber nicht ordnungsgemäß deinstalliert werden kann Wenn Sie den Druckertreiber auch nach einer erneuten Installation nicht korrekt installieren können Gehen Sie bei der Deinstallation des USB-Klasse-Treibers unbedingt folgendermaßen vor.
4 Klicken Sie mit der rechten Maustaste auf [USB-Druckerunterstützung], und wählen Sie dann aus dem Kontextmenü [Deinstallieren] aus. Deinstallieren Sie keine Treiber für andere Geräte. Wenn Sie sie aus Versehen deinstallieren, funktioniert Windows möglicherweise nicht ordnungsgemäß. Wenn der USB-Klasse-Treiber nicht ordnungsgemäß installiert wird, wird [USB-Druckerunterstützung] nicht angezeigt. ], um das Dialogfeld [Geräte-Manager] zu schließen.
7 Trennen Sie das USB-Kabel vom Computer ab, und starten Sie Windows dann erneut.
09US-083 Die Druckertreibereinstellungen können nicht geändert werden Wenn [Spoolen auf Host] (ob die Druckdaten auf dem Computer verarbeitet werden) auf [Deaktiviert] gesetzt wurde, können Sie die Treibereinstellungen nicht ändern, da einige Optionen nicht verfügbar sind. Um die Einstellungen zu ändern, setzen Sie [Spoolen auf Host] mithilfe des folgenden Ablaufs auf [Auto] oder [Aktiviert]. 1 Öffnen Sie den Druckerordner.
[Aktiviert] Alle Druckdaten werden vom Host (Computer) verarbeitet. Wenn Sie die Einstellung nicht ändern können Zur Änderung der Einstellung benötigen Sie Administratorrechte. Wenden Sie sich an Ihren Systemadministrator. 4 Klicken Sie auf [OK].
09US-084 Profile können nicht ausgewählt oder bearbeitet werden Wenn die Kontrollkästchen [Profilauswahl zulassen] und [Alle Einstellungen zulassen] deaktiviert sind, ist die Auswahl und Bearbeitung von Profilen eingeschränkt. Wenn Sie ein Profil auswählen oder bearbeiten möchten, gehen Sie folgendermaßen vor, um das Kontrollkästchen zu aktivieren. 1 Öffnen Sie den Druckerordner.
Wenn Sie die Einstellung nicht ändern können Zur Änderung der Einstellung benötigen Sie Administratorrechte. Wenden Sie sich an Ihren Systemadministrator. 4 Klicken Sie auf [OK].
09US-085 Papierstaus Lesen Sie vor dem Entfernen von gestautem Papier den Abschnitt "Achtung (Papierstaus)". Wenn ein Papierstau auftritt, blinkt die Anzeige Meldungen angezeigt. (Papierstauanzeige (Orange)), und im Statusfenster des Druckers werden Entfernen Sie das in den einzelnen Bereichen gestaute Papier in der Reihenfolge, in der die Bereiche in der Meldung angezeigt werden.
09US-086 Achtung (Papierstaus) Siehe auch "Wichtige Sicherheitsvorschriften". WICHTIG Lassen Sie den Drucker eingeschaltet, wenn Sie gestautes Papier entfernen. Wenn der Drucker ausgeschaltet wird, werden die zu druckenden Daten gelöscht. Entfernen Sie das gestaute Papier nicht gewaltsam. Wenn gestautes Papier gewaltsam herausgezogen wird, kann das Papier reißen oder das Druckerinnere beschädigt werden. Entfernen Sie das Papier, indem Sie es vorsichtig ziehen.
09US-087 Beseitigen von Papierstaus (Papierkassette) 1 Ziehen Sie die Papierkassette heraus. 2 Öffnen Sie die obere Kassettenabdeckung. 3 Entfernen Sie das Papier, indem Sie es vorsichtig ziehen. Wenn Sie das Papier nicht einfach entfernen können, versuchen Sie es nicht gewaltsam zu entfernen, sondern fahren Sie fort mit Schritt 4, und führen Sie ein Verfahren für einen anderen in der Meldung angezeigten Bereich durch. 4 Schließen Sie die obere Kassettenabdeckung.
5 Setzen Sie die Papierkassette in den Drucker ein. Fahren Sie als nächstes mit der Vorgehensweise zur Beseitigung eines Papierstaus in einem anderen Bereich fort, der in der Meldung angezeigt wird.
09US-088 Beseitigen von Papierstaus (Ausgabebereich) 1 Entfernen Sie das Papier, indem Sie es vorsichtig ziehen. Wenn Sie das Papier nicht leicht entfernen können, versuchen Sie nicht, es gewaltsam zu entfernen, sondern fahren Sie an einem anderen Bereich fort, der in der Meldung angezeigt wird. Fahren Sie als nächstes mit der Vorgehensweise zur Beseitigung des Papierstaus in einem anderen in der Meldung angezeigten Bereich fort.
09US-089 Beseitigen von Papierstaus (Innerhalb der rückwärtigen Abdeckung) 1 Öffnen Sie die hintere Abdeckung. 2 Entfernen Sie gestautes Papier. (1) Halten Sie das Papier an beiden Seiten, und ziehen Sie es vorsichtig nach unten. (2) Entfernen Sie das Papier, indem Sie es vorsichtig ziehen. 3 Schließen Sie die hintere Abdeckung. ĺ Die Papierstauanzeige erlischt, und der Drucker ist druckbereit.
09US-08A Anzeigen am Drucker leuchten/blinken Die Anzeigen am Drucker zeigen den Druckerstatus wie folgt an. Führen Sie die Lösungsvorschläge gemäß den leuchtenden/blinkenden Anzeigen durch. Bezeichnung Status (1) Toneranzeige (Leuchtet oder blinkt) Ein Fehler tritt bei den Tonerpatronen auf. (Beispielsweise, wenn die Tonerpatronen das Ende ihrer Nutzungsdauer erreicht haben). Abhilfe Beheben Sie das Problem, indem Sie die Meldung im Modul Printer Status Window befolgen.
Ein Auftrag wird gerade gedruckt oder wartet auf die Druckausgabe. (Leuchtet) (4) Auftragsanzeige Ein Auftrag wird abgebrochen. (Blinkt) (5) Wi-Fi-Anzeige Der Drucker ist über WirelessLAN angeschlossen. (Leuchtet) (nur LBP7110Cw) Das Wireless-LAN ist konfiguriert. (Blinkt) Der Drucker ist eingeschaltet. (Leuchtet) (6) Hauptnetzanzeige Der Drucker wird ausgeschaltet. (Blinkt) (7) Papierstauanzeige Ein Papierstau liegt vor. Entfernen Sie gestautes Papier.
09US-08C Im Statusfenster des Druckers wird eine Meldung angezeigt Führen Sie Maßnahmen entsprechend der angezeigten Meldung durch. Die Art der Meldung variiert je nach Symbol. Es ist ein Serviceaufruf erfolgt. " Servicefehler" Mit dem Drucker kann nicht kommuniziert werden.
Kommunikation mit dem Drucker nicht möglich Da die bidirektionale Kommunikationsfunktion nicht aktiviert ist, kann der Computer nicht mit dem Drucker kommunizieren. Abhilfe Aktivieren Sie die bidirektionale Kommunikation, und starten Sie den Computer und Drucker erneut. "Grundlagen und andere Informationen zur Vorgehensweise unter Windows" Der Computer kann nicht mit dem Drucker kommunizieren, der in der Terminalanschlussumgebung umgeleitet wurde.
Fehler Netzwerkkommunikation Drucker und Computer sind nicht verbunden, oder der Drucker ist nicht eingeschaltet. Abhilfe 1 Verbinden Sie den Drucker und den Computer ordnungsgemäß mit dem Netzwerk. "Verbinden des Druckers und Computers" Abhilfe 2 Schalten Sie den Drucker ein. Gedruckte Ausgaben prüfen Möglicherweise können Sie keine zufriedenstellenden Druckergebnisse erzielen. Abhilfe 1 Abhilfe 2 Wenn Sie auf [ ] (Fehler beheben) klicken, wird der Druckvorgang fortgesetzt.
Im aktuellen Auftrag befinden sich Seiten mit großem Datenvolumen. Abhilfe Die Daten können vom Drucker nicht ausgedruckt werden. Klicken Sie auf [ um den Druckvorgang abzubrechen. ] (Auftrag abbrechen), Keine Tonerpatrone Die Tonerpatrone wurde nicht eingesetzt. Abhilfe Setzen Sie die Tonerpatrone ein unter Beachtung des Abschnitts "Auswechseln der Tonerpatrone". Kein Papier mehr Das Papier, auf dem gedruckt werden soll, ist nicht eingelegt.
Es wurde ein anderes Papier eingelegt, als durch die Papiereinstellung des Auftrags vorgegeben. Abhilfe 1 Legen Sie das angegebene Papier in die Papierkassette ein. "Einlegen von Papier" Wenn das angegebene Papier eingelegt ist, registrieren Sie die Papiereinstellung der Papierkassette erneut.
09US-08E Wenn angezeigt wird Wenn im Statusfenster des Druckers angezeigt wird, führen Sie den folgenden Ablauf durch, um die Stromversorgung des Druckers aus- und wiedereinzuschalten. 1 Schalten Sie den Drucker aus, vergewissern Sie sich, dass die Hauptnetzanzeige aus ist, warten Sie mindestens 10 Sekunden, und schalten Sie ihn dann wieder ein. Wenn die Meldung nicht mehr angezeigt wird, ist der Drucker druckbereit.
* USB-Kabel * (2) Schalten Sie den Computer aus. (3) Ziehen Sie das Kabel aus dem Drucker. LAN-Kabel * (4) Ziehen Sie das Kabel aus dem Drucker. Netzkabel (5) Ziehen Sie den Netzstecker aus der Netzsteckdose. (6) Ziehen Sie das Kabel aus dem Drucker. Ob das Kabel angeschlossen ist, hängt von der Umgebung ab. 4 Wenden Sie sich für einen Kundendienst an Ihren autorisierten Canon-Händler vor Ort.
09US-08F Nicht zufriedenstellende Druckergebnisse Das Papier wellt sich oder ist zerknittert. Das Papier wellt sich Das Papier ist zerknittert Es sind Streifen (Linien) zu sehen. Es sind weiße Streifen (Linien) zu sehen Es sind Streifen (Linien) in abgestuften Teilen zu sehen. Es sind dünne Querstreifen (Laterallinien) zu sehen Es sind Unebenheiten oder Verschmierungen zu sehen.
Der Ausdruck ist schief, fehlt oder verfügt über nicht benötigten Platz.
09US-08H Das Papier wellt sich Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Es wird feuchtes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch neues Papier aus einer ungeöffneten Verpackung. "Vorsichtsmaßnahmen bei Papier" Es wird kein geeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann. "Verwendbares Papier" 60 g/m²-Papier wird verwendet.
1. Zeigen Sie das Modul Printer Status Window an. "Statusfenster des Druckers" Abhilfe 2 2. :lKOHQ 6LH DXV GHP 0HQ >2SWLRQHQ@ GLH 2SWLRQ >*HUlWHHLQVWHOOXQJHQ@ ĺ >8QWHUVWW]HQGH Druckeinstellungen] aus. 3. Aktivieren Sie das Kontrollkästchen [Glätt.korrekt.für ausgegeb.Pp.durchführen]. [Glätt.korrekt.für ausgegeb.Pp.durchführen] wird nur aktiviert, wenn [Papiertyp] im Blatt [Papierzufuhr] im Druckertreiber auf [Dünn 1] eingestellt ist.
09US-08J Das Papier ist zerknittert Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Das Papier ist nicht ordnungsgemäß eingelegt. Abhilfe Legen Sie das Papier korrekt ein. "Einlegen von Papier" Es wird feuchtes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch neues Papier aus einer ungeöffneten Verpackung. "Vorsichtsmaßnahmen bei Papier" Es wird kein geeignetes Papier verwendet.
[Glätt.korrekt.für ausgegeb.Pp.durchführen] wird nur aktiviert, wenn [Papiertyp] im Blatt [Papierzufuhr] im Druckertreiber auf [Dünn 1] eingestellt ist. Beim Drucken auf Briefumschlägen, kann der Umschlag je nach Umschlagtyp oder der Betriebsumgebung (besonders in einer Umgebung mit hoher Feuchtigkeit) knittern. Gehen Sie im Modul Printer Status Window folgendermaßen vor. 1. Zeigen Sie das Modul Printer Status Window an. "Statusfenster des Druckers" Abhilfe 2.
09US-08K Es sind weiße Streifen (Linien) zu sehen Gehen Sie folgendermaßen vor. Die Trommel in einer der Tonerpatronen ist verschlissen. Abhilfe Ersetzen Sie die Tonerpatronen durch neue.
09US-08L Es sind Streifen (Linien) in abgestuften Teilen zu sehen. Gehen Sie folgendermaßen vor. [Grauausgleich] wird an den Halbtonteilen der Streifen (Linien) in Diagrammen angewendet. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. Abhilfe 2. Klicken Sie auf [Erweiterte Einstellungen]. 3. Setzen Sie [Grauausgleich] auf [Nie].
09US-08R Es sind dünne Querstreifen (Laterallinien) zu sehen Gehen Sie folgendermaßen vor. Wenn der Drucker über einen längeren Zeitraum nicht benutzt wurde oder wenn ein bestimmter Papiertyp verwendet wird, können dünne Querstreifen (Laterallinien) in den Halbtonbereichen oder leeren Bereichen des Papiers erscheinen. Gehen Sie im Modul Printer Status Window folgendermaßen vor. 1. Zeigen Sie das Modul Printer Status Window an. "Statusfenster des Druckers" Abhilfe 1 2.
09US-08S Der Druck ist ungleichmäßig Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Das Papier ist zu feucht oder zu trocken. Abhilfe Ersetzen Sie das Papier durch neues Papier aus einer ungeöffneten Verpackung. "Vorsichtsmaßnahmen bei Papier" Die Tonerpatronen sind fast verbraucht. Abhilfe Überprüfen Sie den Tonerpatronenstatus und ersetzen Sie die Tonerpatronen der angezeigten Farben, die sich dem Ende ihrer Nutzungsdauer nähern.
09US-08U Gedruckte Seiten weisen weiße Flecken auf Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Es wird kein geeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann. "Verwendbares Papier" Es wird feuchtes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch neues Papier aus einer ungeöffneten Verpackung.
09US-08W Farben sind uneben oder werden nicht gleichmäßig ausgedruckt Gehen Sie folgendermaßen vor. Es wurden große Zeichen, breite Linien oder Diagramme mit hoher Farbdichte gedruckt. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Endverarbeitung] an. 2. Klicken Sie auf [Erweiterte Einstellungen]. 3. Wählen Sie den geeigneten Modus für [Spezieller Glättungsmodus] aus. Wählen Sie normalerweise den [Modus 1] für [Spezieller Glättungsmodus] aus.
Wählen Sie [Modus 3]. Wenn [Modus 3] gewählt ist, erscheinen möglicherweise Farbungleichmäßigkeiten in hellen Bereichen und schattierten Mustern. Wenn Konturen von hellen Grafiken, Zeichen und Linien nicht gleichmäßig gedruckt werden Wählen Sie [Modus 4]. Wenn [Modus 4] gewählt ist, erscheinen möglicherweise Farbungleichmäßigkeiten in hellen Bereichen. Wenn streifenförmige Unebenheiten auf Bildern (Fotos), Grafiken, Abstufungen und schattierten Mustern erscheinen Wählen Sie [Modus 5].
09US-08X Der Toner haftet nicht gut auf dem Papier Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Einstellung für [Papiertyp] ist nicht korrekt festgelegt. Geben Sie für [Papiertyp] eine korrekte Einstellung an. Abhilfe Wenn Sie Briefumschläge verwenden, legen Sie [Briefumschlag H] fest. "Allgemeines Druckverfahren" Es wird ein nicht geeignetes Papier verwendet.
09US-08Y Das gedruckte Papier weist Verschmierungen auf Gehen Sie folgendermaßen vor. Die Fixierwalze ist verschmutzt. Abhilfe Reinigen Sie die Fixierwalze.
09US-090 Um Text oder Muster herum befinden sich Verschmierungen durch verstreuten Toner Gehen Sie folgendermaßen vor. Es wird ungeeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann.
09US-091 Die Rückseite des gedruckten Papiers weist Verschmierungen auf Gehen Sie folgendermaßen vor. Das Format der Druckdaten war größer als das des eingelegten Papiers. Abhilfe Überprüfen Sie, ob das Format der Druckdaten mit dem des eingelegten Papiers übereinstimmt.
09US-092 Das Druckergebnis ist insgesamt dunkel Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Einstellung für die Tonerdichte ist nicht geeignet. Abhilfe Stellen Sie die Tonerdichte für den Druckvorgang auf eine hellere Einstellung ein. "Einstellen der Tonerdichte" Der Drucker ist direktem Sonnenlicht oder starkem Licht ausgesetzt. Abhilfe Setzen Sie den Drucker an einen anderen Ort.
09US-093 Auf nicht bedruckten Bereichen sind Restbilder zu sehen Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Es wird kein geeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann. "Verwendbares Papier" Wenn 60 bis 74 g/m² Papier gedruckt wird, können, abhängig von der Betriebsumgebung (insbesondere in einer Umgebung mit hoher Luftfeuchtigkeit), Restbilder erscheinen.
09US-094 Auf den gedruckten Folien befindet sich weißer Staub Gehen Sie folgendermaßen vor. Sie haben vor dem Druck auf Folien fortlaufend auf anderem Papier gedruckt. Abhilfe Wischen Sie die Papierreste mit einem weichen Tuch ab.
09US-095 Das Druckergebnis ist insgesamt blass Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Einstellung für die Tonerdichte ist nicht geeignet. Abhilfe Stellen Sie die Tonerdichte für den Druckvorgang auf eine dunklere Einstellung ein. "Einstellen der Tonerdichte" [Toner sparen] ist aktiviert. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. Abhilfe 2. Klicken Sie auf [Erweiterte Einstellungen]. 3.
09US-096 Der Ausdruck ist blass Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Einstellung für [Papiertyp] ist nicht korrekt festgelegt. Geben Sie für [Papiertyp] eine korrekte Einstellung an. Abhilfe Wenn Sie Briefumschläge verwenden, legen Sie [Briefumschlag H] fest. "Allgemeines Druckverfahren" Es wird ein nicht geeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann.
09US-097 Farbiger Text erscheint unscharf Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Für den farbigen Text wird Fettschrift verwendet. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. 2. Aktivieren Sie das Kontrollkästchen [Manuelle Farbeinstellungen]. Abhilfe 3. Klicken Sie auf [Farbeinstellungen]. 4. Öffnen Sie die Registerkarte [Abgleichen]. 5.
09US-098 Daten werden aufgrund von Farbverzerrungen nicht in korrekter Farbe (vorgegebener Farbe) gedruckt Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Tonerpatronen sind nicht ordnungsgemäß eingesetzt. Abhilfe Überprüfen Sie den Installationsstatus der Tonerpatronen. "Auswechseln der Tonerpatrone" Es wird ein nicht geeignetes Papier verwendet. Abhilfe Ersetzen Sie das Papier durch Papier, das mit diesem Drucker verwendet werden kann.
Laserdrucker sind mit Hochpräzisionstechnologie gefertigt. Eine geringfügige Farbverzerrung kann je nach Druckbild sichtbar werden. Bitte beachten Sie, dass dies auf den Bauweise der Laserdrucker zurückzuführen ist und keine Fehlfunktion eines Druckers darstellt.
09US-099 Dünne Linien oder Füllmuster werden nicht mit den vorgegebenen Farben gedruckt oder erscheinen gar nicht Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Einige Farben können aufgrund der Kombination von Farben oder Mustern nicht wiedergegeben werden. Abhilfe 1 Stellen Sie die Farben in der Anwendung ein, und drucken Sie dann erneut. Informationen dazu finden Sie im Benutzerhandbuch zur Anwendung.
09US-09A Schattierte Muster werden nicht in korrekter Farbe (vorgegebener Farbe) gedruckt Gehen Sie folgendermaßen vor. Das schattierte Muster der Druckdaten und das Dither-Muster des Druckers stören sich gegenseitig. Abhilfe 1 Drucken Sie erneut, ohne Festlegung eines schattierten Musters in der Anwendung. Informationen dazu finden Sie im Benutzerhandbuch zur Anwendung. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. Abhilfe 2 2.
09US-09C Fotos usw. werden in anderen als den auf dem Bildschirm angezeigten Farben gedruckt Gehen Sie folgendermaßen vor. Die Verfahren zum Einstellen der Farbe auf dem Bildschirm (RGB) und im Drucker (YMC) sind unterschiedlich. Daher werden die Farben auf dem Bildschirm möglicherweise nicht so ausgedruckt, wie sie angezeigt sind. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. 2. Aktivieren Sie das Kontrollkästchen [Manuelle Farbeinstellungen].
09US-09E Füllmuster und Rahmen werden nicht in korrekter Farbe (vorgegebener Farbe) gedruckt, selbst wenn für sie die gleiche Farbe festgelegt wird Gehen Sie folgendermaßen vor. Möglicherweise wird ein spezielles Verfahren angewendet, das von der Linienbreite des Rahmens abhängig ist, so dass dünne Linien klar ausgedruckt werden. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. 2. Aktivieren Sie das Kontrollkästchen [Manuelle Farbeinstellungen]. 3.
09US-09F Quadratische Flächen, die auf dem Bildschirm nicht zu sehen sind, erscheinen rund um Linien oder Text und werden in einer anderen Farbe als die anderen Bereiche gedruckt Gehen Sie folgendermaßen vor. Ein anderes als das vorgegebene Verfahren für die Halbtonverarbeitung oder Farbverarbeitung wird je nach Betriebssystem oder Anwendung angewendet. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Qualität] an. Abhilfe 1 2.
09US-09H Einstellen der Farbe usw. für den Druckvorgang Dieser Drucker ermöglicht Ihnen, mit folgenden Einstellungen und Korrekturen zu drucken.
09US-09J Die Druckposition ist schief Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Es wurde ein [Bundsteg] angegeben. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Endverarbeitung] an. Abhilfe 2. Klicken Sie auf [Bundsteg]. 3. Setzen Sie [Bundsteg] auf "0". Die Einstellungen für "Oberer Rand" und "Papierposition" wurden in der Anwendung nicht korrekt angegeben.
09US-09K Ein Teil der Seite wird nicht gedruckt (Druckdaten liegen außerhalb des Papiers) Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Einstellung für den Skalierungsfaktor ist nicht geeignet. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Seite einrichten] an. Abhilfe 1 2. Deaktivieren Sie das Kontrollkästchen [Manuelle Skalierung].
Das eingelegte Papier ist kleiner als die Papierkassette oder die Papierformateinstellung für den Auftrag. Abhilfe Legen Sie Papier ein, das der Papierformateinstellung entspricht, oder ändern Sie die Papierformateinstellung zur Anpassung an das Papier.
09US-09L Die Daten werden verkleinert gedruckt Gehen Sie folgendermaßen vor. Die Einstellung für den Skalierungsfaktor ist nicht geeignet. Gehen Sie im Druckertreiber folgendermaßen vor. 1. Zeigen Sie die Registerkarte [Seite einrichten] an. Abhilfe 1 2. Deaktivieren Sie das Kontrollkästchen [Manuelle Skalierung].
09US-09R Die nächste Seite wird halb über die vorherige Seite gedruckt Gehen Sie folgendermaßen vor. Die Einstellungen für "Zeilenabstand" oder "Zeilen/Seite" wurden in der Anwendung nicht korrekt angegeben. Abhilfe Geben Sie die Einstellungen für "Zeilenabstand" oder "Zeilen/Seite" in der Anwendung korrekt an, sodass die Daten auf eine Seite passen, und wiederholen Sie dann den Druckvorgang. Informationen dazu finden Sie im Benutzerhandbuch zur Anwendung.
09US-09S Es wird leeres Papier ausgegeben (Auf dem Papier wurde nichts gedruckt) Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Tonerpatronen wurden mit Abdichtband eingesetzt. Abhilfe Nehmen Sie die Tonerpatronen aus dem Drucker, ziehen Sie das Abdichtband heraus, und setzen Sie die Tonerpatronen dann wieder ein. "Auswechseln der Tonerpatrone" Es werden mehrere Blätter Papier gleichzeitig eingezogen.
09US-09U Die gesamte Oberfläche des Papiers wird in einer bestimmten Farbe gedruckt Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Die Trommel in einer der Tonerpatronen ist verschlissen. Abhilfe Ersetzen Sie die Tonerpatronen durch neue. "Auswechseln der Tonerpatrone" Im Druckerinneren ist ein Problem aufgetreten.
09US-09W Die Umschlagklappe des gedruckten Briefumschlags bleibt hängen Führen Sie eine der folgenden Maßnahmen entsprechend der Ursache durch. Der Briefumschlag ist nicht geeignet. Abhilfe Ersetzen Sie den Briefumschlag durch einen Briefumschlag, der mit diesem Drucker verwendet werden kann.
09US-09X Mehrere Blätter Papier werden gleichzeitig eingezogen Gehen Sie folgendermaßen vor. Sie verwenden Papier, das leicht mehrfach eingezogen wird. Fächern Sie das Papier sorgfältig durch, und richten Sie dann die Kanten des Stapels an einer harten und ebenen Oberfläche sorgfältig aus.
09US-09Y Gedruckte Barcodes können nicht gescannt werden Gehen Sie folgendermaßen vor. Je nach Typ oder Format des Barcodes kann das Scannen schwierig sein. Stellen Sie im Druckertreiber unter [Tonerdichte] die Option [Schwarz] * auf eine hellere Einstellung ein ([-2] oder [-1]). "Einstellen der Tonerdichte" Abhilfe 1 * Stellen Sie die Farbe ein, die zum Drucken des Barcodes verwendet wird. Wenn mit einer helleren Tonerdichte gedruckt wird, kann der Ausdruck blass erscheinen.
09US-0A0 Wenn Sie ein Problem nicht beheben können Wenn das Problem unter Bezugnahme auf die e-Anleitung nicht behoben werden kann, wenden Sie sich an Ihren autorisierten Canon-Händler vor Ort oder an die Canon-Hotline ( "Geschäftsstellen").
09US-0A1 Anhang Tipps zur bestmöglichen Verwendung des Druckers Grundlagen und andere Informationen zur Vorgehensweise unter Windows Für Benutzer von Windows 8/Server 2012 㻡㻜㻥㻌㻛㻌㻡㻞㻠
09US-0A2 Tipps zur bestmöglichen Verwendung des Druckers Machen Sie sich zur bestmöglichen Verwendung des Druckers mit den Aufgaben und Funktionen der mit dem Drucker mitgelieferten Software vertraut. Druckertreiber Der Druckertreiber ist eine Software, die es Ihnen ermöglicht, den Drucker durch Druckanweisungen vom Computer zu steuern. Der Druckertreiber ist mit nützlichen Druckfunktionen ausgestattet, und Sie können diese verwenden, indem Sie die Einstellungen frei kombinieren.
Netzwerk-Dienstprogramme Nützliche Dienstprogramme sind für die Druckerverwaltung usw. verfügbar. Da die verwaltbaren Funktionen von der Software abhängen, verwenden Sie die für Ihre Umgebung oder die zu verwaltende Funktion geeignete Software.
09US-0A3 Grundlagen und andere Informationen zur Vorgehensweise unter Windows Anzeigen von [Computer] oder [Arbeitsplatz] Festlegen der IP-Adresse mit dem ARP/PING-Befehl Anzeigen der Startseite der CD-ROM Überprüfen der IP-Adresse mit dem PING-Befehl Überprüfen der Prozessorversion von Windows Vista, 7 oder Server 2008 Drucken einer Testseite unter Windows Überprüfen der bidirektionalen Kommunikation Installation über Plug & Play Anzeigen des Druckerordners Überprüfen von Druckern auf dem Druckserver Über
Geben Sie die MAC-Adresse des Druckers ein. Trennen Sie die Zahl jeweils nach zwei Ziffern durch einen Bindestrich (-). Eingabebeispiel: "arp -s 192.168.0.215 00-1E-8F-05-70-31" HINWEIS Überprüfen der MAC-Adresse "Überprüfen der MAC-Adresse des Druckers" 5 Geben Sie "ping -l 479" ein, und drücken Sie dann auf Ihrer Tastatur die Taste [EINGABE]. Geben Sie dieselbe IP-Adresse wie in Schritt 4 ein. Geben Sie das "L" als Kleinbuchstaben ein ("-l").
2. Drücken Sie auf Ihrer Tastatur die Taste [EINGABE]. Überprüfen der IP-Adresse mit dem PING-Befehl 1 Starten Sie die Eingabeaufforderung. :lKOHQ 6LH DXV GHP 0HQ >6WDUW@ GLH 2SWLRQ >$OOH 3URJUDPPH@ ĺ >=XEHK|U@ ĺ >(LQJDEHDXIIRUGHUXQJ@ 2 Geben Sie "ping " ein, und drücken Sie dann auf Ihrer Tastatur die Taste [EINGABE]. Eingabebeispiel: "ping 192.168.0.215" Geben Sie die IP-Adresse, die für den Drucker festgelegt wurde, korrekt ein.
Überprüfen der Prozessorversion von Windows Vista, 7 oder Server 2008 Wenn Sie sich nicht sicher sind, ob Sie die 32-Bit-Version von Windows Vista/7/Server 2008 oder die 64-Bit-Version von Windows Vista/7/Server 2008 verwenden, können Sie dies folgendermaßen überprüfen. 1 Wählen Sie aus dem Menü [Start] die Option [Systemsteuerung] aus. 2 Zeigen Sie [System] an. .OLFNHQ 6LH DXI >6\VWHP XQG 6LFKHUKHLW@ RGHU >6\VWHP XQG :DUWXQJ@ ĺ >6\VWHP@ Doppelklicken Sie auf [System].
"Anzeigen des Druckerordners" 3 Rechtsklicken Sie auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü die Option [Druckereigenschaften] oder [Eigenschaften] aus. 4 Drucken Sie eine Testseite. (1) Zeigen Sie die Registerkarte [Allgemein] an. (2) Klicken Sie auf [Testseite drucken], um eine Testseite zu drucken. Überprüfen der bidirektionalen Kommunikation 1 Öffnen Sie den Druckerordner.
"Anzeigen des Druckerordners" 2 Rechtsklicken Sie auf das Symbol für diesen Drucker, und wählen Sie dann aus dem Kontextmenü die Option [Druckereigenschaften] oder [Eigenschaften] aus. 3 Überprüfen Sie die bidirektionale Kommunikation. (1) Zeigen Sie die Registerkarte [Anschlüsse] an. (2) Vergewissern Sie sich, dass das Kontrollkästchen [Bidirektionale Unterstützung aktivieren] aktiviert ist. WICHTIG Deaktivieren Sie das Kontrollkästchen [Bidirektionale Unterstützung aktivieren] nicht.
1 Schließen Sie das USB-Kabel an. "Verbinden des Druckers und Computers" 2 Schalten Sie den Drucker ein. 3 Schalten Sie den Computer ein, und melden Sie sich dann unter Windows als Benutzer mit Administratorrechten an. ĺ Der Plug & Play-Bildschirm für die automatische Installation wird angezeigt. Wenn der Druckertreiber automatisch installiert wird Wenn Sie den Druckertreiber für diesen Drucker bereits zuvor installiert haben, wird der Treiber automatisch installiert.
4 Befolgen Sie die im Dialog angezeigten Anleitungen, um den Druckertreiber zu installieren. HINWEIS Wenn der Ordner ausgewählt wird, in dem sich der Druckertreiber befindet Wählen Sie einen der folgenden Ordner aus. Für ein 32-Bit-Betriebssystem Wählen Sie die Ordner auf der mitgelieferten CD-ROM aus: [German] - [32bit] - [Driver]. Für ein 64-Bit-Betriebssystem Wählen Sie die Ordner auf der mitgelieferten CD-ROM aus: [German] - [x64] - [Driver].
Wählen Sie aus dem Menü [Start] die Option [Drucker und Faxgeräte] aus. Wählen Sie aus dem Menü [Start] die Option [Systemsteuerung] aus, und klicken Sie dann auf [Drucker und andere +DUGZDUH@ ĺ >'UXFNHU XQG )D[JHUlWH@ Wählen Sie aus dem Menü [Start] die Option [Systemsteuerung] aus, und klicken Sie dann auf [Drucker]. Wählen Sie aus dem Menü [Start] die Option [Geräte und Drucker] aus. Wählen Sie aus dem Menü [Start] die Option [Systemsteuerung] aus, und doppelklicken Sie dann auf [Drucker].
3 Überprüfen Sie einen Anschluss. (1) Zeigen Sie die Registerkarte [Anschlüsse] an. (2) Überprüfen Sie den aktuell verwendeten Anschluss. Werte für die Einstellung eines Anschlusses Der Wert, der in dem folgenden Dialog, der beim Einstellen eines Anschlusses angezeigt wird, in [Druckername oder -IPAdresse] ([Druckername oder IP-Adresse] für Windows 2000) eingegeben wird, variiert abhängig von der Methode zur Festlegung der IP-Adresse des Druckers.
"Überprüfen der IP-Adresse des Druckers" Wenn Sie die IP-Adresse über den DNS-Server festlegen möchten, geben Sie die DNS-Einstellungen für den Drucker an. Geben Sie anschließend in [Druckername oder -IP-Adresse] ([Druckername oder IP-Adresse] für Windows 2000) den Druckernamen (der auf dem DNS-Server registrierte DNS-Name) mit maximal 78 Zeichen ein. Geben Sie den Druckernamen beispielsweise mit "AAA.BBB.com" an, wenn Sie den Hostnamen mit "AAA" und den Domänennamen mit "BBB.com" angegeben haben.
09US-0A6 Für Benutzer von Windows 8/Server 2012 Dieser Drucker unterstützt die Betriebssysteme Windows 8/Server 2012. Näheres über den Betrieb und die Erläuterungen zu Windows 8/Server 2012 finden Sie in den Abschnitten zu Windows Vista/7. In diesem Abschnitt werden einige Hinweise zur Verwendung dieses Druckers unter Windows 8/Server 2012 gegeben. Lesen Sie diesen Abschnitt sorgfältig, bevor Sie den Drucker verwenden.
09US-0A4 Geschäftsstellen CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinbao Building No.