PUB.
Important Usage Instructions Introduction WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Y P O C WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE.
Getting to Know the Camcorder What is so special about recording on flash memory? Your videos and photos are recorded in the built-in memory ( / / only) or on a memory card (SD or SDHC card). Recording on flash memory means that there are no moving parts in the recorder unit of the camcorder. To you, it means a camcorder that is smaller, lighter and faster.
Table of contents Introduction ______________________________ Y P O C 3 8 10 10 11 14 Getting to Know the Camcorder About this Manual Overview Supplied Accessories and CD-ROMs Components Guide Screen Displays Preparations _____________________________ 17 17 19 21 23 23 24 25 26 26 27 27 28 28 28 29 29 4 Getting Started Charging the Battery Pack Preparing the Wireless Controller ( only) and Accessories Adjusting the Position and Brightness of the LCD Screen Basic Operation of the Camcorder Oper
Table of contents Video ____________________________________ Y P O C 31 31 32 32 34 35 35 37 37 38 39 40 41 41 42 43 44 46 46 47 48 48 49 50 51 51 52 53 53 53 Basic Recording Shooting Video Selecting the Video Quality (Recording Mode) Zooming: Optical, Advanced and Digital Zoom Quick Start Function Basic Playback Playing Back the Video Selecting What Recordings to Play Back Selecting Scenes by Recording Date Selecting the Playback Starting Point from the Movie Timeline Pre-selecting Recordings fr
55 / / Copying Scenes Y P O C Photos __________________________________ 57 57 57 59 59 59 61 62 63 63 64 64 65 66 66 66 67 69 Basic Recording Taking Photos Selecting Photo Size and Quality Erasing a Photo Right After Recording It Basic Playback Viewing Photos Magnifying Photos during Playback Deleting Photos Additional Functions / / Drive Mode: Continuous Shooting and Exposure Bracketing Histogram Display Protecting Photos / / Copying Photos Other Functions You Can Use When Taking Photos Pri
Table of contents 77 80 Transferring Photos to a Computer (Direct Transfer) Transfer Orders Y P O C Additional Information ______________________ 81 81 83 83 85 85 87 89 90 90 94 Appendix: Menu Options Lists FUNC. Menu Setup Menus Camera Setup (Zoom Type, Image Stabilizer, etc.) Memory Operations (Initialization, etc.) Display Setup (LCD Brightness, Language, etc.) System Setup (Speaker Volume, Beep, etc.
Introduction About this Manual Thank you for purchasing the Canon LEGRIA FS22/FS21/FS20/FS200*. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting ( 90). Y P O C * Availability differs from area to area. Conventions Used in this Manual • • • IMPORTANT: Precautions related to the camcorder’s operation. NOTES: Additional topics that complement the basic operating procedures.
Special Scene Recording Programs Names of buttons and switches other than the joystick are indicated within a “button” frame. For example FUNC. . Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. For details about the available options, refer to the sidebar on page 49. Y P O C Brackets [ ] are used to refer to menu options as they are displayed on screen.
Introduction Overview Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder. CA-570 Compact Power Adapter BP-808 Battery Pack STV-250N Stereo Video Cable IFC-400PCU USB Cable Y P O C WL-D88 Wireless Controller Lithium Button Battery CR2025 for Wireless Controller WS-30 Wrist Strap Yellow • Red • White plugs The following CD-ROMs and software are supplied with the camcorder. • PIXELA Application Disc Ver.1 Disc 1 CD-ROM* and ‘PIXELA ImageMixer 3 SE Ver.
Components Guide Left side view RESET button ( 93) VIDEO SNAP (Video Snapshot) button ( 44)/ (print/share) button ( 67, 77) DISP. (on-screen display) button ( 51, 64)/ BATT.
Introduction Back view Remote sensor ( 19) LCD screen ( 21) ON/OFF(CHG) (power/charge) indicator ( 18) Camera mode dial ( 23) Start/Stop button ( 31) (camera/play) button ( 24) PLAYLIST button ( 53)/ Zoom in T (telephoto) button ( 32) (stop) button ( 35)/ Zoom out W (wide-angle) button ( 32) / (play/pause) button ( 35)/ START/STOP button ( 31) FUNC.
Wireless Controller WL-D88 START/STOP button ( 31) FUNC. button ( 25, 81) MENU button ( 25, 83) PLAYLIST button ( 53) Navigation buttons ( / / / ) (frame reverse) button ( 36) (fast reverse) button ( 36) (play) button ( 35) (pause) button ( 35) (stop) button ( 35) PHOTO button ( 57) Zoom buttons ( 32) SET button (frame advance) button ( 36) (fast forward) button ( 36) DISP.
Introduction Screen Displays Recording Movies Operating mode ( 23) Recording program ( 41, 42) White balance ( 48) Image effects ( 49) Digital effects ( 50) Recording mode ( 32) Remote sensor off ( 87) Manual focus ( 48) Image stabilizer ( 83) Pre-recording function ( 46) Memory operation ( 16) Number of scenes recorded (record pause)/Time code (hours : minutes : seconds, while recording) Remaining recording time On the memory card / / In the built-in memory Remaining battery time ( 16) Headphone output (
Recording Photos Zoom ( 32), Exposure ( 47) Recording program ( 41, 42) White balance ( 48) Image effect ( 49) Digital effect ( 50) Drive mode ( 63) Photo quality/size ( 57) Manual focus ( 48) Remaining battery time ( 16) Number of photos available ( 16) On the memory card / / In the built-in memory Self timer ( 46) AF frame ( 84) Joystick guide ( 24) Mini video light ( 43) Focus and exposure lock ( 57) Camcorder shake warning ( 84) Remote sensor off ( 87) Photo number ( 16, 88) Current photo / Total numbe
Introduction Memory operation Record, Record pause, Playback, Playback pause, Fast playback, Fast reverse playback, Slow playback, Slow reverse playback only: Frame advance, Frame reverse Y P O C Remaining recording time When there is no more free space on the memory, [ END] (built-in memory, / / only) or [ END] (memory card) will be displayed and the recording will stop.
Preparations This chapter describes basic operations, such as navigating the menus, and first time settings to help you learn more about your camcorder. 2 Plug the power cord into a power outlet. 3 Connect the compact power adapter to the camcorder’s DC IN terminal. 4 Slide the battery compartment cover away from the lens and open it. 5 Insert the battery pack all the way into the compartment and press gently until it clicks. 6 Close the cover and slide it toward the lens until you hear a click.
Preparations ON/OFF(CHG) indicator 7 Y P O C Charging will start when the camcorder is turned off. • The ON/OFF(CHG) indicator starts flashing in red. The indicator will go out when the charging is completed. • If the indicator flashes quickly, refer to Troubleshooting ( 90). ONCE THE BATTERY PACK IS FULLY CHARGED 1 Disconnect the compact power adapter from the camcorder. 2 Unplug the power cord from the power outlet and the compact power adapter.
supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. NOTES 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. Y P O C • Turn off the camcorder before charging the battery pack. The battery pack will not charge while the camcorder is on.
Preparations Accessories TO ATTACH A WRIST STRAP Y P O C Fasten the grip belt. • Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Start/Stop button with your thumb. • You can remove the grip belt and replace it with the supplied wrist strap. TO REMOVE THE GRIP BELT 1 Lift the padded handgrip's flap and detach the strap from the Velcro pad.
You can also remove the grip belt and attach the shoulder strap directly to the rear bracket on the camcorder. TO REATTACH THE GRIP BELT - To allow the camcorder to be operated with the wireless controller from the front. 180° Y P O C 1 Pass the end of the strap through the rear bracket on the camcorder. 2 Thread the strap through the padded handgrip and then pass it through the front bracket on the camcorder.
Preparations LCD Backlight You can set the brightness of the screen to dim, normal or bright. To set the screen to dim, turn on [LCD DIMMER] (s 85). To toggle between normal and bright or to turn off [LCD DIMMER], perform the following procedure. Y P O C While the camcorder is on, hold DISP. pressed down for more than 2 seconds. Repeat the operation to switch between normal and bright. NOTES • This setting does not affect the brightness of the recording.
you change the camcorder's settings to your preference. Basic Operation of the Camcorder Operating Modes Y P O C The camcorder's operating mode is determined by the button and the position of the camera mode dial. In this manual, indicates that a function is available in the operating mode shown and indicates that the function is not available. See the following table for a summary of the operating modes.
Preparations You can access the menus and change settings to your preference. Even in flexible recording mode, the camcorder can help you with the settings. For example, you can use the Special Scene recording programs ( 41) to set at once all the optimal settings to match special recording conditions. Joystick and Joystick Guide Use the joystick to operate the camcorder's menus. Push the joystick up, down, left or right ( , ) to select an item or change settings.
In either mode, if you wait a few seconds, the joystick guide will minimize again but the selected function can still be operated. You can also push the joystick ( ) to hide the joystick guide. 1 2 Press FUNC. . Select ( ) the icon of the function you want to change from the left side column. Menu items not available will appear grayed out. Y P O C 3 Select ( ) the desired setting from the available options at the bottom bar. • The selected option will be highlighted in orange.
Preparations 2 Select ( , ) the icon and press to open the setup menus. You can also press MENU on the wireless controller ( only) or hold FUNC. pressed down for more than 1 second or to open directly the setup menus screen. First Time Settings Setting the Date and Time Y P O C 3 Select ( ) the desired menu from the left side column and press . The title of the selected menu appears on top of the screen and under it the list of settings. 4 Select ( ) the setting you want to change and press .
• The date appears in a year-month-day format only in the first setup screen. In subsequent screen displays the date and time will appear as day-month-year (for example, [1.JAN.2009 12:00 AM]). You can change the date format ( 89). • You can also change the date and time later on (not during the initial setup). To open the [DATE/TIME] screen: NOTES • If you changed the language by mistake, select the menu item with the mark and change the setting.
Preparations Using a Memory Card Inserting and Removing a Memory Card Memory Cards Compatible for Use with the Camcorder Make sure to initialize all memory cards before using them with this camcorder ( 29). Y P O C You can use commercially available SDHC (SD high capacity) memory cards and SD memory cards with this camcorder to record movies and photos. However, depending on the memory card, you may not be able to record movies on it. Refer to the following table.
Do not force the cover closed if the memory card is not correctly inserted. depend on the recording mode (for movies) or size/quality (for photos) currently in use. IMPORTANT Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. Initializing the Built-In Memory ( / / only) or Memory Card Y P O C NOTES To remove the memory card: Push the memory card once to release it.
Preparations FUNC. [ MENU] [ MEMORY OPER.] [INITIALIZE] Initialization method [YES]* [OK] FUNC. Y P O C * Press to cancel the complete initialization while it is in progress. All recordings will be erased but the recording media can be used without any problem. IMPORTANT • Initializing the memory will permanently erase all data. Lost original recordings cannot be recovered. Make sure you back up important recordings in advance using an external device ( 74).
Video This chapter covers functions related to shooting movies, including recording, playback, and memory operations. • You can also press the LCD panel. START/STOP on Y P O C Basic Recording WHEN YOU HAVE FINISHED RECORDING Shooting Video 1 Make sure that the ACCESS indicator is off. 2 Turn off the camcorder. 3 Close the LCD panel. ( 23) IMPORTANT Observe the following precautions while the ACCESS indicator is on or flashing.
Video NOTES Selecting the Video Quality (Recording Mode) The camcorder offers 3 recording modes. Changing the recording mode will change the recording time available on the memory. Select XP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times. Y P O C ( FUNC. Zooming: Optical, Advanced and Digital Zoom 23) The camcorder offers three types of zoom: optical, advanced and digital zoom. In mode, all three types are available.
Selecting the Zoom Type [WIDESCREEN] set to [ / ( Options [ 23) Default value OPTICAL] (37x) * The picture angle will be wider at both full telephoto and full wide-angle. ** The picture angle will be wider at full wide-angle. [WIDESCREEN] set to [ / ADVANCED] (Advanced Zoom) In addition to the optical zoom range, the camcorder processes the image digitally to obtain a larger zoom range without any deterioration in image quality.
Video camcorder entered the standby mode. NOTES • Keep at least 1 m away from the subject. At full wide angle, you can focus on a subject as close as 1 cm. • When [ZOOM SPEED] is set to [ VARIABLE]: - The zoom speed will be faster in record pause mode than when actually recording. - When you use the T and W buttons on only) or the wireless controller ( LCD panel, the zoom speed will be constant at [ SPEED 3]. 2 When you wish to resume recording, open the LCD panel.
4 Basic Playback Playing Back the Video Y P O C ( 23) 1 Set the camera mode dial to or . 2 Press . • Even if the camcorder is off, pressing will turn on the camcorder in playback mode. • The original movies index screen appears after a few seconds. 3 Press / or to begin the playback. • Playback will start from the scene selected and continue until the end of the last scene recorded. • Press / again to pause the playback. • Press to stop the playback and return to the index screen.
Video movies on the memory card using this camcorder. • You may not be able to play back with this camcorder movies recorded using another device. NOTES Frame Advance/Reverse ( only) In playback pause mode, press or on the wireless controller to reverse a few frames (approx. 0.5 seconds) or to advance one frame. Hold the button pressed for continuous playback. Y P O C Depending on the recording conditions, you may notice brief stops in video or sound playback between scenes.
Selecting What Recordings to Play Back From the index screen, you can select whether to play back movies or photos. You can also use the tabs on the top of the screen to select the media from which to play back recordings ( / / only). 3 Return ( ) to the index screen to select the scene or photo. Selecting Scenes by Recording Date Y P O C ( 23) You can search for all the recordings you made on a particular date (for example, to find all the movies you shot during a special event).
Video day. Below it will appear the number of scenes recorded and the total recording time for the same day. 3 Change ( ) the day and move ( ) to the month or year. 4 Change the other fields in the same way to select the desired date and press . The index screen will appear with the selection frame on the first scene recorded on the selected date. Y P O C Selecting from the Calendar Screen 1 2 3 38 number of scenes recorded and the total recording time for the same day.
1 In the index screen select the scene you want to view and press DISP. . • The timeline screen appears. The large thumbnail will show the first frame of the scene. Below it, the timeline ruler shows frames taken from the scene at fixed intervals. • Press DISP. again to return to the index screen. TO CHANGE THE INTERVAL BETWEEN FRAMES FUNC. Desired interval FUNC.
Video 3 Move ( , ) between the scenes or photos in the index screen and press to select an individual scene/photo. • A checkmark will appear on the selected scenes/photos. • Repeat this step to add all the scenes/photos you want to include in your selection (up to 100). Deleting Scenes You can delete original scenes that you are not interested in keeping. Deleting scenes also allows you to free up space on the memory. To delete scenes in the playlist, refer to Deleting Scenes from the Playlist ( 54).
operation while it is in progress. Some scenes will be deleted nevertheless. Advanced Functions IMPORTANT • Be careful when deleting original recordings. Once deleted, an original scene cannot be recovered. • Back up important scenes before deleting them ( 74). • Observe the following precautions while the ACCESS indicator is on or flashing (while scenes are being deleted). - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder.
Video [ PORTRAIT] The camcorder uses a large aperture, achieving a focus on the subject while blurring other distracting details. [ BEACH] Use this mode to record on a sunny beach. It prevents the subject from being underexposed. Y P O C [ SPORTS] Use this mode to record sports scenes such as tennis or golf. [ SUNSET] Use this mode to record sunsets in vibrant colors. [ NIGHT] Use this mode to record in dimly lit places. [ SPOTLIGHT] Use this mode to record spotlit scenes.
1/2*, 1/3*, 1/6, 1/12, 1/25 ( Options [ 23) Default value 1/50 To record under most ordinary conditions. PROGRAM AE] The camcorder automatically adjusts the aperture and shutter speed to obtain the optimal exposure for the subject. [ To record in dimly lit places. 1/120 Y P O C SHUTTER-PRIO.AE] Set the shutter speed value. The camcorder automatically sets the appropriate aperture value.
Video CD-ROM. For details, refer to the software’s instruction manual (PDF file). ( 23) Y P O C 1 Push the joystick ( the joystick guide. 2 Select ( ) [VID.LIGHT ] and press . • appears on the screen. • Press again to turn the mini video light off. ) to display Recording Scenes ( 1 Press VIDEO SNAP . • The button’s light illuminates. • A blue border appears on the screen. 2 Press Start/Stop . • The camcorder records for about 4 seconds and then automatically switches to record pause mode.
1 In the original movies index screen, press VIDEO SNAP . • The button’s light illuminates. • An index screen appears that contains only the Video Snapshot scenes. 2 Set the background music. FUNC. [ SELECT MUSIC] FUNC. Select ( ) a track* Y P O C NOTES * Press to start/stop the track. Select [OFF] to set the original audio of the scenes. • Transfer Utility may not be used without permission from the copyright holder, except for cases permitted under applicable laws, such as for personal use.
Video camcorder ( files again. 45) and transfer the Pre-recording Function - Turning on pre-recording - Exiting standby mode - Stopping a recording • Pre-recording will be turned off when any of the following operations are performed. - Opening the FUNC.
* 2 seconds when using the wireless controller. Automatic Backlight Correction NOTES • When the LCD panel is rotated toward the lens, we recommend pushing the joystick ( ) to hide the joystick guide and make the icon appear larger. • The self timer will be canceled when any of the following operations are performed.
Video • During exposure lock, press to return the camcorder to automatic exposure. Manual Focus Adjustment Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Instead of step 3 in the previous procedure: Push the joystick ( ) toward and hold it down. • appears. • If you operate the zoom or push the joystick ( ) and hold it down, changes to [MF] and the camcorder returns to manual focus.
[ TUNGSTEN] For recording under tungsten and tungsten type (3-wavelength) fluorescent lighting. [ SET] Use the custom white balance setting to make white subjects appear white under colored lighting. • Custom white balance may provide better results in the following cases: - Changing lighting conditions - Close-ups - Subjects in a single color (sky, sea or forest) - Under mercury lamps and certain types of fluorescent lights Y P O C FUNC. [ AUTO] Desired option* Image Effects FUNC.
Video FUNC. * You can preview the digital effect on the screen. **The icon of the selected digital effect appears. [ IMAGE EFFECT OFF] Desired option FUNC. Applying Y P O C Digital Effects ( Options [ 23) Default value D.EFFECT OFF] Select this setting when you do not intend to use the digital effects. [ FADE-T] (fade trigger), [ WIPE] Select one of the faders to begin or end a scene with a fade from or to a black screen. [ Push the joystick ( the joystick guide. 2 Select ( ) [D.
NOTES • When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally. • The camcorder retains the last setting used even if you turn off the digital effects or change the recording program.
Video appears. TO ADJUST THE VOLUME OF THE HEADPHONES In mode, adjust the volume of the headphones with the [PHONES VOL.] setting ( 87). In mode, adjust the headphone’s volume the same way you adjust the speaker’s volume ( 35). During slideshow playback, push the joystick ( ) to adjust the volume. When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder’s internal machinery. In such case, we recommend using an external microphone.
Playlist and Scene Operations Dividing Scenes Y P O C You can divide scenes (original scenes only) in order to leave out the best parts and later cut out the rest. ( 23) 1 Open the original movies index screen. / / You can select the movies in the built-in memory or on the memory card ( 37). 2 Select ( , ) the scene you want to divide. 3 Open the scene division screen. FUNC. [ DIVIDE] The scene selected will start playing back. 4 • A progress bar will be displayed on the screen.
Video FUNC. scenes ( 44). Moving or deleting scenes in the playlist will not affect the original recordings. ( [ ADD TO PLAYLIST] Desired option [YES] • When the operation is completed [ADDED TO PLAYLIST] will be displayed. • / / Scenes are added to the playlist on the same media they are recorded on. • To check the playlist, press PLAYLIST .
2 Select ( , ) the scene you want to delete. This step is not necessary to delete all scenes. 3 Delete the scene(s). FUNC. [ DELETE] Desired option [YES] [OK] / / Copying Scenes You can copy original movies or the entire playlist only from the built-in memory to the corresponding location on the memory card. Y P O C FUNC. Moving Scenes in the Playlist ( Move the scenes in the playlist to play them back in the order of your choice. 1 Open the playlist index screen.
Video 3 Copy the scene(s). FUNC. [ COPY] Desired option [YES]* FUNC. [OK] * Press to interrupt the operation while it is in progress. Y P O C Copying the Entire Playlist 1 Open the index screen of the builtin memory's playlist. In the original movies index screen of the built-in memory, press PLAYLIST . 2 Copy the scene(s). FUNC. [ COPY] FUNC. [YES]* [OK] * Press to interrupt the operation while it is in progress.
Photos Refer to this chapter for details on shooting photos – from capturing and playing back photos to printing them. • When you press PHOTO on the wireless controller, the photo is recorded after the autofocus is activated and locked. Y P O C Basic Recording 4 Taking Photos Press PHOTO fully. The ACCESS indicator will flash as the photo is being recorded. IMPORTANT ( 23) Observe the following precautions while the ACCESS indicator is on or flashing.
Photos NOTES ( 23) • The camcorder retains the last setting used even if you set the camcorder to mode. • When printing photos, use the following guidelines as a reference for selecting the print size. Options Photo size options and the approximate number of photos that can be recorded on memory cards of various sizes are given in the table below. FUNC. [ Y P O C Photo size 1152x864] ( / / only) or [ 1024x768] ( only) Desired photo size* Desired photo quality* FUNC.
Erasing a Photo Right After Recording It You can erase the photo recorded last while reviewing it within the time set for the [REVIEW] option or immediately after recording it, if [REVIEW] is set to [ OFF]. Basic Playback Viewing Photos Y P O C ( ( 23) 23) While reviewing the photo immediately after recording: 1 Push the joystick ( the joystick guide. 2 3 Press Select ( ) to display . ) [YES] and press . When the camera mode dial is set to or : 1 Press .
Photos 4 5 Return ( ) to the index screen. Select ( , ) a photo. • Move the orange selection frame to the photo you want to view. • Push the joystick ( ) to extend the selection frame and browse ( ) through whole index pages. Push the joystick ( ) to return to the index screen. 1 Push the joystick ( the joystick guide. 2 Select ( ) . 3 Select ( )[ PHOTOS] or [ PHOTOS]. Jump ( ) the number of photos selected and press . Y P O C Press .
2 Press / to play back the photos one after another. Press to stop the slideshow. TO SET THE SLIDESHOW TO MUSIC NOTES / / When playing back a slideshow, make sure the music files are in the same media (built-in memory or memory card) that contains the photos. For details, refer to the instruction manual (PDF file) of the supplied software Music Transfer Utility. • When playing back a slideshow from a memory card, we recommend using a memory card that is rated Speed Class 2 or higher.
Photos • 2 will appear for photos that cannot be enlarged. [ONE PHOTO] Move ( , ) the frame to the part of the photo you want to see enlarged. To cancel the magnification, move the zoom lever toward W until the frame disappears. Deletes only the photo marked with the orange selection frame. [SELECTED PHOTOS] Deletes all the photos selected in advance (marked with a checkmark). Refer to Pre- Y P O C selecting Recordings from the Index Screen ( 1 Open the photo index screen.
Options Additional Functions [ Default value SINGLE] Records a single photo. [ CONT.SHOOT.] (Continuous Shooting), [ HISPEED CONT.SHOOT. ] (High-Speed Continuous Shooting) / / Drive Mode: Continuous Shooting and Exposure Bracketing Y P O C Take a series of photos of a moving subject or record the same photo in 3 levels of exposure in order to choose later the photo you like the best. Captures a series of photos as long as you hold PHOTO pressed down.
Photos AUTO EXPOSURE BRACKETING Protecting Photos Press PHOTO , first halfway to activate the autofocus and then fully to record the photos. Three photos in different exposures will be recorded. You can protect photos from accidental erasure. Y P O C ( 23) Protecting Single Photos Histogram Display When viewing photos you can display the histogram and the icons of all the functions used at the time of recording. Use the histogram as a reference to verify the correct exposure of the photo.
FUNC. [ PROTECT] Desired option [SELECTED PHOTOS] [YES] Copies all the photos selected in advance (marked with a checkmark). Refer to Pre- [OK] FUNC. selecting Recordings from the Index Screen ( IMPORTANT 39). 1 Open the index screen of the photos recorded in the built-in memory. Move the zoom lever toward W and then select the (built-in memory) tab. Copying Photos 2 If you want to copy only one photo, select ( , ) the photo you want to copy.
Photos • If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy photos to the memory card. Other Functions You Can Use When Taking Photos You can also use the following functions... Printing Photos Printing Photos Y P O C The following functions and features of the camcorder can be used either for shooting video or for taking photos.
• appears and changes to . • The (print/share) button lights up and the current print settings will be displayed for approx. 6 seconds. Printing with the Button (Print/Share) You can print a photo without changing the settings simply by pressing . IMPORTANT Y P O C • If continues to flash (for more than 1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer.
Photos 2 Options [PAPER] Select ( ) and press . The print settings menu appears. Paper settings [ PAPER SIZE]: Available paper sizes vary depending on the printer model. Current paper settings (paper size, paper type and page layout) [ PAPER TYPE]: Select [PHOTO], [FAST PHOTO], [PLAIN] or [DEFAULT]. Y P O C [ PAGE LAYOUT]: Select [DEFAULT], [BORDERED] or one of the following page layouts. [BORDERLESS]: The photo is enlarged and may be slightly cropped at the edges to fit the paper.
PRINT ERRORS If an error occurs while printing, an error message, for example [NO PAPER], will appear on the camcorder. Solve the problem referring to the error message list ( 100) and to the printer’s instruction manual. • Canon’s PictBridge-compatible printers: If printing does not resume automatically after you solved the problem, select [CONTINUE] and press to resume printing. If that option is not available, select [STOP] and press and then restart printing from the beginning.
Photos Selecting Photos for Printing (Print Order) Setting Print Orders from the Index Screen Set the print orders before connecting the supplied USB cable to the camcorder. Options Marking Single Photos with Print Orders 1 Open the photo selection screen. FUNC. [ PRINT ORDER] appears on the screen. 2 Select ( ) the photo you want to mark with a print order. 3 Press to set the print order. The number of copies appears in orange. 4 Set ( ) the number of copies desired and press .
Printing starts. The print settings menu disappears when the printing is completed. NOTES • Depending on the connected printer, you can change some print settings before step 3 ( 67). • To cancel the printing, refer to page 68. • Restarting Printing: Open the print settings menu as explained in step 2. In the print settings menu, select [RESUME]* and press . The remaining photos will be printed.
External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. Y P O C Terminals on the Camcorder AV OUT/ H Terminal Access: Open the LCD panel. Sound from the built-in speaker will be muted while the STV-250N Stereo Video Cable is connected to the camcorder. USB Terminal Access: Open the LCD panel. Connection Diagrams Connection Type: Analog Output only Connect to a TV or VCR with audio/video input terminals.
Connection In all respects, exactly the same connection as connection above. Connect to a standard TV or VCR with SCART input terminal. Requires a SCART adapter (commercially available). Red White Yellow STV-250N Stereo Video Cable (supplied) Y P O C Connection SCART adapter (commercially available) Type: Digital data connection Connect to a computer to transfer and back up your recordings, to the optional DW-100 DVD Burner to create DVD discs from them, or to a printer to print out photos.
External Connections Saving and Backing Up Your Recordings Backing Up Your Recordings on a Computer Saving your Recordings without a Computer If you prefer to save your recordings without having to use a computer, you can use the optional DW-100 DVD Burner to create DVD discs of your movies and Photo DVDs of your photos ( 74). You can also connect the camcorder to an external recording device (DVD or HDD recorder, VCR, etc.) to save copies of your movies ( 77).
Options for creating DVD discs ( mode) [ALL SCENES] Connecting to the DVD Burner and Creating a Disc 1 Turn on the DVD burner. Refer to Creating DVDs. 2 Connect the camcorder to the DVD burner using the supplied USB cable. • Connection . Refer to Connection Diagrams ( 72) and Connections. • If the device type selection screen appears, select [DVD BURNER] and press . • When the connection is completed, [NO DISC] will be displayed. Add all the scenes to the disc(s). [REM.
External Connections 4 Press the start button on the DVD burner. • A progress bar will be displayed on the screen. • After pressing the start button (while the current disc is being written) the operation cannot be canceled. • When the disc (or the last disc, if the data requires multiple discs) is finalized, [TASK COMPLETED] will be displayed. Take out the disc and close the disc tray.
or less. (In such case, the connection time will be about 3 minutes 30 seconds). Copying your Recordings to an External Video Recorder NOTES • We recommend powering the camcorder using the compact power adapter. • By default, on-screen displays will be embedded in the output video signal. You can change the displays by repeatedly pressing DISP. ( 51). Y P O C You can copy your recordings by connecting the camcorder to a VCR or a digital video device.
External Connections / / Select in advance the memory from which you want to transfer photos ( 37). 3 Connect the camcorder to the computer using the USB cable. • Connection . Refer to Connection Diagrams ( 72). • If the device type selection screen appears, select [PC/PRINTER] and press . • The direct transfer menu appears on the camcorder screen and the button lights up. - Do not open the memory card slot cover. - Do not disconnect the USB cable. - Do not turn off the camcorder or the computer.
transfer photos to a computer. Try using a card reader. • Disconnect the USB cable before changing the operating mode. Transferring Photos Y P O C ( 23) Automatic Transfer Options All the relevant photos will be transferred to the computer in one batch and their thumbnails will be displayed on the computer. [ ALL PHOTOS] AUTOMATIC TRANSFER OPTIONS Transfers all photos. [ NEW PHOTOS] Transfers only those photos that have not yet been transferred to the computer.
External Connections 4 NOTES When the camcorder is connected to the computer and the photo selection screen is displayed, press FUNC. to return to the transfer menu. Repeat steps 2-3 to mark additional photos with transfer orders or press FUNC. twice to close the menu. Setting Transfer Orders from the Index Screen Y P O C Options Transfer Orders [INDIVIDUAL PHOTOS] You can mark in advance the photos you want to transfer to the computer as transfer orders.
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Y P O C Appendix: Menu Options Lists Menu items not available appear grayed out in the FUNC. menu or in black in the setup menus. For details about how to select an item, refer to Using the Menus ( 25). For details about each function, see the reference page. Menu options without a reference page are explained below the tables. FUNC. Menu FUNC.
Additional Information FUNC.
Menu item [DELETE] Setting options [ALL SCENES], [ALL SCENES (THIS DATE)], [ONE SCENE], [SELECTED SCENES], [CANCEL] 2 – [ALL SCENES], [ONE SCENE], [CANCEL] 3 – From single photo view: [NO], [YES] From the index screen: [ALL PHOTOS], [ONE PHOTO], [SELECTED PHOTOS], [CANCEL] 54 62 Y P O C [SCENE SEARCH]2 1 2 3 4 – 40 [CALENDAR], [SELECT DATE], [CANCEL] – 37 Option not available from the original movies index screen.
Additional Information • We recommend setting the image stabilizer to [ OFF] when using a tripod. [WIDESCREEN]: The camcorder uses the full width of the image sensor providing highresolution 16:9 recordings. • Since the screen on the camcorder has an aspect ratio of 16:9, recordings with a 4:3 aspect ratio will appear in the center of the screen with black sidebars. • Playing back a widescreen recording: TV sets compatible with the WSS system will automatically switch to wide (16:9) mode.
Memory Operations (Initialization, etc.) MEMORY OPER. Menu item / / Setting options – – [MEMORY INFO] Y P O C [CARD INFO] / – – / [BUILT-IN MEM], [CARD] – – 29 / [BUILT-IN MEM], [CARD] – – 29 [MEDIA:MOVIES] / [MEDIA:PHOTOS] [INITIALIZE] * [BUILT-IN MEM], [CARD], [CANCEL] 29 [INITIALIZE], [COMPL.INIT.], [CANCEL] * Option available from the original movies index screen and Video Snapshot index screen.
Additional Information Menu item [LANGUAGE ] Setting options 27 [ ],[DEUTSCH], [ ] [ENGLISH], [ESPAÑOL], [FRANÇAIS], [ITALIANO], [MAGYAR], [MELAYU], [NEDERLANDS], [POLSKI], [PORTUGUÊS], [ ], [TÜRKÇE], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] Y P O C [START WEEK] [SATURDAY], [SUNDAY], [MONDAY] [DEMO MODE] [ ON], [ OFF] – – – – – – – [BRIGHTNESS]: Adjusts the brightness of the LCD screen.
[DEMO MODE]: The demonstration mode displays the camcorder's main features. It starts automatically when the camcorder is powered with the compact power adapter if you leave it turned on for more than 5 minutes. • To cancel the demo mode once it has started, press any button or turn off the camcorder. System Setup (Speaker Volume, Beep, etc.) SYSTEM SETUP Y P O C Menu item [BATTERY INFO] Setting options – [ – ON], [ OFF ] – [WL.
Additional Information • In standby mode, the camcorder will shut off after the time selected for the [QUICK START] setting. • The Power Save mode cannot be set while the compact power adapter is connected to the camcorder. [QUICK START]: Select whether to activate the Quick Start function ( 34) when you close the LCD panel in a recording mode and the length of time after which the camcorder will end the standby mode and shut off automatically. Y P O C [SPEAKER VOL.
Date/Time Setup DATE/TIME SETUP Menu item Setting options [T.ZONE/DST] List of world time zones. 27 [DATE/TIME] – 26 [DATE FORMAT] [Y.M.D (2009.1.1 AM 12:00)], [M.D,Y (JAN. 1, 2009 12:00 AM)], [D.M.Y (1.JAN.2009 12:00 AM)] – Y P O C [DATE FORMAT]: Select the date format to be used for most on-screen displays, and (if selected) for the date printed on photos.
Additional Information Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
The battery pack is exhausted extremely quickly even at normal temperatures. - The battery may have reached the end of its battery life. Buy a new battery pack. Recording Pressing Start/Stop will not start recording. - You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS indicator is on or flashing). - The memory is full or it already contains 3,999 scenes (the maximum number of scenes).
Additional Information Cannot play back a music track. - If the music tracks were erased when the memory was initialized, use the supplied software Music Transfer Utility to transfer the music files on the supplied Instruction Manual/Music Data Disc CD-ROM. For details, refer to the software’s instruction manual (PDF file). When playing back recordings combined with music, the video and audio do not play back correctly (playback skips or stops).
Screen displays turn on and off repeatedly. - The battery pack is exhausted. Replace or charge the battery pack ( - Remove the battery pack and reattach it correctly. 17). Abnormal characters appear on the screen and the camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. Video noise appears on screen.
Additional Information The computer doesn't recognize the camcorder even though the camcorder is connected correctly. - [USB SETTING] is set to [DVD BURNER]. Set it to [PC/PRINTER] or to [CONNECT&SET] ( 87). - Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection. The printer is not working even though the camcorder and printer are connected correctly. - [USB SETTING] is set to [DVD BURNER]. Set it to [PC/PRINTER] or to [CONNECT&SET] ( 87).
/ / CANNOT COPY - The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete some recordings on the memory card ( 40, 62) or reduce the number of scenes to copy. CANNOT DIVIDE THE SCENE. INITIALIZE ONLY USING THE CAMCORDER. - The scene could not be divided because data could not be added to the camcorder's file management data. Back up the recordings ( 74) and initialize the memory ( 29).
Additional Information CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 29). CARD FULL - The memory card is full. Erase some recordings ( 40, 62) to free some space or replace the memory card.
NO PHOTOS - There are no photos to play back. NO SCENES - There are no scenes recorded in the memory selected. NOT AVAILABLE IN DUAL SHOT - You pressed a button that cannot be used in mode ( or ). mode. Turn the camera mode dial to a flexible recording Y P O C NOT ENOUGH AVAILABLE SPACE CANNOT DIVIDE THE SCENE - The scene could not be divided because there was not enough available space in the memory. Delete some scenes ( 40). PLAYLIST IS FULL. CANNOT DIVIDE THE SCENE. - Scene could not be divided.
Additional Information THE CAMCORDER IS SET TO PHOTO MODE - You pressed Start/Stop while the camera mode dial was set to . THE CARD IS SET FOR ERASURE PREVENTION - The LOCK switch on the SD or SDHC memory card is set to prevent accidental erasure. Change the position of the LOCK switch. THE MEMORY CARD COVER IS OPEN - After inserting a memory card, close the memory card slot cover ( 28). Y P O C THIS PHOTO COULD NOT BE DELETED - Protected photos cannot be deleted.
Messages Related to the Optional DW-100 DVD Burner If a message appears while the camcorder is connected to the optional DW-100 DVD Burner, refer to the following section and also to the instruction manual of the DVD Burner. CANNOT READ THE DISC CHECK THE DISC - During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
Additional Information Direct Print Related Messages CANNOT PRINT! - You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer. CHECK PRINT SETTINGS - Current print settings cannot be used for printing with the button. Y P O C COMMUNICATION ERROR - The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable.
PAPER JAM - The paper jammed during printing. Select [STOP] to cancel printing. After removing the paper, set some paper again and retry printing. PAPER LEVER ERROR - Paper lever error occurred. Adjust the paper selection lever to the proper position. PRINT ERROR - Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. Check the printer status. - When you are printing using the button, check the print settings.
Additional Information Do’s and Don’ts Handling Precautions Camcorder • it may damage the camcorder and/or the lens. Be careful of heat generated by lighting equipment. Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified service personnel. Handle the camcorder with care. Do not subject the camcorder to shocks or vibration as this may cause damage. When mounting the camcorder on a tripod, make sure that the tripod's fastening screw is shorter than 5.5 mm.
place free of dust, in low humidity, and at temperatures not higher than 30 °C. Battery Pack Long-term Storage • Store battery packs in a dry place at temperatures no higher than 30 °C. • To extend the battery life of the battery pack, discharge it completely before storing it. • Charge and discharge all your battery packs fully at least once a year. Y P O C DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode).
Additional Information • Do not disassemble, bend, drop, or subject memory cards to shocks and do not expose them to water. • Check the direction before inserting the memory card. Forcing a memory card into the slot if it is not correctly oriented may damage the memory card or the camcorder. • Do not attach any labels or stickers on the memory card. • SD/SDHC memory cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card's content.
necessary precautions when you dispose of the camcorder or memory card, for example by physically damaging it to prevent the leakage of private data. / / If giving the camcorder to another person, initialize the built-in memory using the [COMPL.INIT.] setting ( 29), fill it up with unimportant recordings, and then initialize it again using the same method. This makes recovering the original recordings very difficult.
Additional Information Condensation may form in the following cases: Playback on a TV Screen • When the camcorder is moved quickly from cold to warm places • When the camcorder is left in a humid room • When a cold room is heated rapidly You can only play back your recordings on TVs compatible with the PAL system. PAL (or the compatible SECAM system) is used in the following regions/ countries: Europe: All of Europe and Russia.
On the memory card: [CANON] [PRIVATE] [MY_MUSIC] Y P O C MUSIC_01.WAV to MUSIC_99.WAV / / In the built-in memory: [CANON] [MY_MUSIC] MUSIC_01.WAV to MUSIC_99.WAV The supplied Instruction Manual/ Music Data Disc CD-ROM contains a folder called [MUSIC]. This folder contains two folders called [MUSIC 1] and [MUSIC 2]. [MUSIC 1] contains the tracks that are pre-installed in the builtin memory of the FS22/FS21/FS20. [MUSIC 2] contains tracks different from those in [MUSIC 1].
Additional Information General Information System Diagram (Availability differs from area to area) SS-600/SS-650 Shoulder Strap Y P O C TV WS-30 Wrist Strap VCR/DVD recorder WL-D88 Wireless Controller* SCART Adapter CG-800E Battery Charger STV-250N Stereo Video Cable DW-100 DVD Burner DVD discs BP-808 Battery Pack IFC-400PCU USB Cable CA-570 Compact Power Adapter PictBridgecompatible printers SD/SDHC memory card SC-2000 Soft Carrying Case * 108 only.
Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Additional Information Recording and Playback Times The recording and playback times given in the following table are approximate and vary according to recording mode and charging, recording or playback conditions. The effective usage time of the battery pack may decrease when recording in cold surroundings, when using the brighter screen settings, etc. Using the built-in memory ( / / only) Y P O C Recording mode XP Usage time SP LP Maximum recording time 210 min. 215 min. 215 min.
SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. Y P O C This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Additional Information Specifications LEGRIA FS22/FS21/FS20/FS200 System Y P O C Recording System Television System Recording Media Movies: SD-Video Video compression: MPEG-2 Audio compression: Dolby Digital 2ch (AC-3) Photos: DCF (Design rule for camera system), compatible with Exif1 Ver. 2.
Lens / / f=2.6-96.2 mm, F/2.0-5.2, 37x optical zoom 35 mm equivalent (all figures are approximate values) 16:9 Movies (advanced zoom) 41.7-1,877 mm (optical zoom) 47.1-1,743 mm 4:3 Movies (advanced zoom) 44.6-2,052 mm (optical zoom) 44.6-1,650 mm 16:9 Photos 45.2-1,672 mm 4:3 Photos 41.5-1,536 mm f=2.6-96.2 mm, F/2.0-5.2, 37x optical zoom 35 mm equivalent (all figures are approximate values) 16:9 Movies (advanced zoom) 40.5-1,676 mm (optical zoom) 45.3-1,676 mm 4:3 Movies (advanced zoom) 49.
Additional Information CA-570 Compact Power Adapter Power supply Rated output / consumption Operating temperature Dimensions Weight 100 – 240 V AC, 50/60 Hz 8.4 V DC, 1.5 A / 29 VA (100 V) – 39 VA (240 V) 0 – 40 °C 52 x 29 x 90 mm 135 g Y P O C BP-808 Battery Pack Battery type Rated voltage Operating temperature Battery capacity Dimensions Weight Rechargeable lithium ion battery, compatible with Intelligent System 7.4 V DC 0 - 40 °C 890 mAh 30.7 × 23.3 × 40.
Index A Abroad, using the camcorder . . . . . . .106 AEB - Auto exposure bracketing . . . . . .63 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . . . . . .87 Audio level indicator . . . . . . . . . . . . . . .85 Auto slow shutter . . . . . . . . . . . . . . . . .83 Autofocus (AF): AF frame (9-point AiAF/Center point) . . . . . . . . .84 AV OUT/ H terminal . . . . . . . . . . . . . . . .72 B Y P O C Backing up recordings . . . . . . . . . . . . .74 Backlight correction . . .
Additional Information M Magnifying photos . . . . . . . . . . . . . . . . 61 Maintenance . . . . . . . . . . . . . . . . . . . . 105 Manual exposure adjustment . . . . . . . . 47 Markers . . . . . . . . . . . . . . . . . . . . . . . . . 85 Memory card . . . . . . . . . . . . . . . . . . . . 103 MIC terminal . . . . . . . . . . . . . . . . . . . . . 52 Microphone . . . . . . . . . . . . . . . . . . . . . . 52 Mini video light . . . . . . . . . . . . . . . . . . . 43 Music Files . . . . . . . . . . . . . .
V Z VIDEO SNAP . . . . . . . . . . . . . . . . . . . . .44 Video Snapshot . . . . . . . . . . . . . . . . . . .44 Volume . . . . . . . . . . . . . . . . . . . . . . .35, 87 Zoom Advanced zoom . . . . . . . . . . . . . . . 32 Zoom speed . . . . . . . . . . . . . . . 32, 83 Zoom type . . . . . . . . . . . . . . . . . . . 33 W Y P O C White balance . . . . . . . . . . . . . . . . . . . .48 Wide angle . . . . . . . . . . . . . . . . . . . . . . .32 Wind screen . . . . . . . . . . . . . . . . . . . . . .
Canon Europa N.V. Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands www.canon-europa.com Y P O C Canon UK Ltd. CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, England Telephone 0870-241-2161 Canon Australia Pty Ltd Tel: 13-13-83 (within Australia only) (61) 02-9805-2555 www.canon.com.au Canon New Zealand Ltd Tel: 800-222-666 (within New Zealand only) (64) 02-9805-2555 www.canon.co.nz Canon Singapore Pte.
