PUB.
Introduction Important Usage Instructions COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. To reduce the risk of electric shock, do not expose this product to dripping or splashing. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident.
REGIONS OF USE LEGRIA HF M56 is in compliance (as of January 2012) with the radio signal regulations of the regions listed below. For details on other regions where it can be used, make inquiries with the contacts listed on the back side of this instruction manual. REGIONS Australia, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France*, Germany, Greece, Hong Kong S.A.R.
Trademark Acknowledgements • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • App Store, iPhone, iTunes, Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. • “x.v.Color” and the “x.v.Color” logo are trademarks.
Exciting Features and New Functions 0 Audio Scene Select Wi-Fi Functions (A 111) (A 155) Enjoy the freedom of Wi-Fi functions by making your camcorder an active part of your Wi-Fi home network or by conveniently accessing Wi-Fi hotspots to upload your videos wherever you may be. • You can save your recordings wirelessly to a computer in your home network using the supplied software Network Utility (A 162).
Smart AUTO (A 46) Smart AUTO automatically selects the best scene mode for the scene you want to shoot. You get spectacular recordings every time without worrying about settings. Video Snapshot Face Detection (A 70) (A 97) Shoot or capture short scenes and arrange them into a video clip set to your favorite background music. 0 Memory Save (A 143) C Easily save the whole content of the built-in memory or a memory card onto an external hard drive connected directly to the camcorder.
Enjoying Your Recordings on Other Devices Eye-Fi Connect the camcorder to an HDTV (A 134) Use an Eye-Fi card (A 152) to wirelessly upload recordings to your computer or a video sharing Web site. Upload your AVCHD movies* (A 148) or MP4 movies (A 154) to the Web. MP4 Y P O Upload MP4 movies to your computer (A 140). C AVCHD High Definition Save your recordings. You can also create discs from your recordings.* Use the supplied PIXELA’s software (A 138).
0 Enjoying Your Recordings Using the Camcorder's Wi-Fi Functions Play video wirelessly directly from the memory on AVCHD- and DLNA-compatible HDTVs and other devices connected to the network (A 170). LAN cable Y P O Join a Wi-Fi network by first connecting to an access point (A 157). C Wirelessly connect to a Wi-Fi-enabled iOS device like an iPhone to upload your recordings (A 167).
Table of contents Introduction 5 13 15 15 17 Exciting Features and New Functions About this Manual Getting to Know the Camcorder Supplied Accessories and CD-ROMs Names of Parts Preparations 20 20 23 25 26 26 27 30 33 33 34 35 36 36 38 39 39 40 42 Getting Started Y P O Charging the Battery Pack Preparing the Accessories Adjusting the LCD Screen Basic Operation of the Camcorder C Using the Touch Screen Using the Menus Operating Modes First Time Settings Setting the Date and Time Changing the
AUTO Mode 44 Basic Recording 44 46 48 49 51 Shooting Video and Taking Photos in AUTO Mode About the Smart AUTO function Intelligent IS Zooming Quick Start Video 53 53 57 58 59 63 65 66 66 69 70 71 76 78 80 82 84 84 86 86 88 91 92 95 95 96 97 Basic Playback Playing Back Video 3D Flip View The [Index Selection] Screen: Selecting the Content to Play Back Deleting Scenes and Stories Selecting the Playback Starting Point Onscreen Displays and Data Code Y P O Video Stories and Cinema Style Using Sto
99 100 101 103 104 105 106 107 109 110 111 115 116 118 119 120 121 123 Touch & Track Faders Manually Setting the Shutter Speed or Aperture Manual Exposure Adjustment Automatic Gain Control (AGC) Limit Manual Focus Adjustment Tele Macro White Balance Image Effects Self Timer Audio Scenes and Other Audio Settings Audio Recording Level Using Headphones Using the Mini Advanced Shoe Using an External Microphone Using an External Video Light Capturing Video Snapshot Scenes and Photos from a Movie Dividing Scenes
0 Wi-Fi Functions 155 157 162 166 167 170 Introduction to Wi-Fi Connecting to a Wi-Fi Network Transferring Files to a Computer or FTP server Uploading Recordings to YouTube and Facebook Uploading Videos Using an iOS Device Wireless Playback on a DLNA-Compatible Device Additional Information 174 Appendix: Menu Options Lists 174 178 [Main Functions] Panel [Other Settings] Menus 190 Appendix: Onscreen Icons and Displays 195 Trouble? 195 203 Troubleshooting List of Messages 214 Do’s and Don’ts 214 219
About this Manual Thank you for purchasing the Canon LEGRIA HF M56 / LEGRIA HF M506. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 195). Conventions Used in this Manual • • • • • • • IMPORTANT: Precautions related to the camcorder’s operation. NOTES: Additional topics that complement the basic operating procedures.
indicates that a function is available in the operating mode indicated and indicates that the function is not available. The operating mode icons are divided into three groups: the first three icons represent the camera mode, the second three icons represent the recording standard, and the last two represent playback modes. For a detailed explanation refer to Operating Modes (A 30).
Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder: XCA-110E Compact Power Adapter (incl. power cord) BP-718 Battery PackW XIFC-300PCU/S USB Cable HTC-100/S HDMI CableW XQuick Guide XWi-Fi Basic Setup Guide* Y P O Stylus PenW * 0 only.
The following CD-ROMs and software are supplied with the camcorder: • PIXELA CD-ROM - 0 You can use VideoBrowser for managing, editing, and playing back AVCHD movies, and Network Utility when transferring recordings wirelessly to a computer. - 1 Use Transfer Utility for saving and transferring AVCHD movies and music files you can use as background music. - A printed Startup Guide for PIXELA's software is also supplied. Refer to this Startup Guide for details about the supplied software.
Names of Parts 1 VIDEO SNAP (video snapshot) button (A 70) 2 HOME (home) button (A 27) 3 U (camera/play) button (A 32) 4 BATTERY RELEASE switch (A 21) 5 USB terminal (A 130, 133, 143, 147) 6 HDMI OUT terminal (A 130, 131) 7 AV OUT terminal (A 130, 132)/ × (headphones) terminal (A 116) 8 START/STOP button (A 44) 9 Wi-Fi antenna (0 only) Left side view Right side view 8 a A qA 9 C Y P O A q a A s A d A f A g A Strap mount (A 23) Grip belt (A 23) Memory card slot (A 38) Stereo microphone (A 115) Remote
A k A h Speaker (A 55) Zoom lever (A 49) Mini advanced shoe (A 118) ACCESS (access) indicator (A 44) POWER button ON/OFF (CHG) (charge) indicator: Green – On Orange – Standby (A 51) Red – Charging (A 20) s LCD touch screen (A 25, 26) S A h j A k A l A q S a S Top view A j S q A l S a LCD panel S s C 18 Introduction Y P O
S DC IN terminal (A 20) d f Battery attachment unit (A 20) S g Serial number S Back view S d S f h Tripod socket (A 215) S Bottom view S g S h C Y P O Introduction 19
Preparations This chapter describes basic operations, such as using the touch panel, navigating the menus, and first time settings to help you learn more about your camcorder. Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. For approximate charging times and recording/playback times with a fully charged battery pack, refer to Charging, Recording and Playback Times (A 223).
ON/OFF (CHG) (charge) indicator 5 Charging will start when the camcorder is turned off. • If the camcorder was on, the green ON/OFF (CHG) indicator will go out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will turn on in red (battery pack charging). The red ON/OFF (CHG) indicator will go out when the battery pack is fully charged. • If the indicator flashes, refer to Troubleshooting (A 199).
• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. NOTES • We recommend charging the battery pack in temperatures between 10 °C and 30 °C. If either the ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to 40 °C, charging will not start.
Preparing the Accessories Grip Belt and Straps Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Y button with your thumb. You can attach the supplied stylus pen to the grip belt. To remove the grip belt Y P O 1 Lift the padded handgrip’s flap and detach the strap from the Velcro pad.
To attach an optional wrist strap Attach the wrist strap to the rear bracket on the camcorder, adjust the length and fasten. You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection. To attach an optional shoulder strap Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap.
Adjusting the LCD Screen Rotating the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful to allow the camcorder to include yourself in the picture when recording with the self timer.
Basic Operation of the Camcorder Using the Touch Screen The control buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips. You can also use the supplied stylus pen for a more precise operation. Touch Press firmly on an element displayed on the touch screen.
Using the Menus Many of the camcorder's functions can be adjusted from the [ Main Functions] panel and [ Other Settings] menus in the HOME menu. For details about the available menu options and settings, refer to the appendix Menu Options Lists (A 174). HOME Menu Operating modes: The HOME menu is the gateway to most of the camcorder's functions and settings. After you press , the HOME menu will appear and you can select from the following control buttons.
•[ Camera Mode] - From the [ Camera Mode] menu, you will be able to change whether you record movies in mode (camcorder automatically takes care of many settings), mode (you can manually change settings), or mode (using the cinema-look filters, you can make movies with a cinematic feel). Available only in recording mode. For details on how to set the camera mode, refer to Recording (A 30). •[ Recording Standard] - This camcorder can record movies in either the AVCHD or MP4 recording standard.
In mode Drag your finger up and down along the scroll bar to display the rest of the panel Touch to scroll up or down Touch the control button of the desired function You may need to drag your finger up and down along the scroll bar or touch [ ] and [ ] to find the control button of the desired function. [Edit] Panel Operating modes: Y P O Touch [Edit] to display a panel showing available operations (copying, deleting, etc.), and then touch the operation you want to perform.
1 Press menu. to open the HOME 2 Touch [ Other Settings] to open the [Other Settings] menus. 3 Touch the tab of the desired menu. 4 Drag your finger up and down to bring the setting you want to change into the orange selection bar. • You can also use the [ ] and [ ] icons for scrolling. • Menu items not available appear grayed out. • You can touch any menu item on the screen to bring it directly into the selection bar. 5 When the desired menu item is inside the selection bar, touch [ ].
Camera mode (AUTO mode) (Manual mode) (Cinema mode) Operation Let the camcorder take care of most of the settings while you concentrate on recording (A 44). Great for beginners or if you just prefer not to bother with detailed camcorder settings. Enjoy full access to menus, settings and advanced functions (A 86). Give your recordings a cinematic look and use cinema-look filters to create unique movies (A 69). Next, set the recording standard.
NOTES • You can adjust the video quality using the r > [Recording Mode] setting. • Some portable devices may not be able to play back MP4 movies recorded with this camcorder. Playback Press the camera/play button T to switch the camcorder between camera (recording) mode and playback mode. You can press T when the camcorder is off to turn it on directly in playback mode. Playback mode Operation C Y P O Playing back movies (A 53). Viewing photos (A 125).
First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen (date and time setup screen) will appear automatically when the camcorder’s clock is not set. When the [Date/Time] screen appears, the year will be selected. 1 Touch a field you want to change (year, month, day, hours or minutes). 2 Touch [Î] or [Í] to change the field as necessary.
Changing the Language The default language of the camcorder is English. You can set it to one of 27 languages. Operating modes: 1 Press . 2 Select the desired language. [ Other Settings] > q > [Language !]* > Desired language > [OK] > [X] Y P O * After changing the camcoder’s language to English, select q > [Language !] to change the language. NOTES C • Some control buttons, such as [ZOOM] or [PHOTO], will appear in English regardless of the language selected.
Changing the Time Zone Change the time zone to match your location. The default setting is Paris. Operating modes: 1 Press . 2 Open the [Time Zone/DST] screen. [ Other Settings] > q > [Time Zone/DST] 3 Touch ["] to set the home time zone, or [#] to set the time zone of your destination when you are traveling. 4 Touch [Í] or [Î] to set the desired time zone. If necessary, touch [$] to adjust for daylight saving time. Y P O 5 Touch [X] to close the menu.
Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use the following types of commercially available Secure Digital (SD) cards with this camcorder. As of December 2011, the movie recording function has been tested using SD/SDHC/SDXC memory cards made by Panasonic, Toshiba and SanDisk. For the latest information on cards that can be used, visit your local Canon Web site. Memory card type: .
Compatible operating systems for SDXC memory cards Operating system Compatibility Windows 7 Compatible Windows Vista Compatible (requires Service Pack 1 or later) Windows XP Compatible (requires Service Pack 3 and KB955704 update) Mac OS X Compatible (requires version 10.6.5 or later) IMPORTANT • If you use an SDXC memory card with a computer OS that is not SDXCcompatible, you may be prompted to format the memory card. In such case, cancel the operation to prevent data loss.
Inserting and Removing a Memory Card Make sure to initialize (A 40) all memory cards before using them with this camcorder. 1 Turn off the camcorder. Make sure the ON/OFF (CHG) indicator is off. 2 Open the memory card slot cover. 3 Insert the memory card straight, with the label facing away from the camcorder, all the way into the memory card slot until it clicks. • Be sure you understand the information provided in Eye-Fi Cards (A 37) before using an Eye-Fi card. Y P O 4 Close the memory card slot cover.
0 Selecting the Memory (Built-in Memory/Memory Card) for the Recordings You can select to record your movies and photos in the built-in memory or on a memory card. The default memory for recording both is the built-in memory. Operating modes: POINTS TO CHECK • Be sure you understand the information provided in Eye-Fi Cards (A 37) before using an Eye-Fi card. 1 Press . 2 Select the desired memory.
3 Activate the relay recording. [ Other Settings] > r > [Rec Media for Movies] > [&] > [Relay Recording] > [%]* > [X] * The approximate available recording time will now reflect the combined space in the memories used for relay recording. NOTES • There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another. • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder. - Opening the memory card slot cover.
3 Initialize the memory. 0 [ Other Settings] > q > [Initialize &/*] > [& Built-in Mem.] or [* Mem. Card] > [Initialize] > [Complete Initialization]1 > [Yes]2 > [OK] > [X] 1 [ Other Settings] > q > [Initialize *] > [Initialize] > [Complete Initialization]1 > [Yes]2 > [OK] > [X] 1 2 Touch this option if you want to physically erase all the data rather than just clear the file allocation table of the memory.
Using the Optional Wireless Controller When you use the optional WL-D89 Wireless Controller, you can conveniently operate the camcorder from a distance when, for example, you are using a tripod to achieve a stable shot. To use the wireless controller, first perform the following procedure to turn on the camcorder's remote sensor. Operating modes: 1 Press . 2 Turn on the remote sensor.
Wireless Controller’s Buttons NOTES C 1 START/STOP button (A 44) 2 G (index selection) button • In any index screen (during playback mode), press to open the [G Index Selection] screen (A 58). • Press and hold for more than 2 seconds to switch between shooting and playback mode. 3 MENU button (A 29, 178) Functions the same as on the camcorder. 4 DISP. (onscreen display) button (A 65) Selects whether to display onscreen information during playback. 5 SET button Selects an onscreen item.
AUTO Mode This chapter covers how to easily record video and photos in mode, and how to use basic shooting functions like zoom and Quick Start. To enjoy full access to menus and more advanced functions, refer to Recording in Manual Mode (A 86). Basic Recording Shooting Video and Taking Photos in AUTO Mode With mode, you can take great-looking videos and photos by letting the camcorder automatically adjust settings based on the recording situation.
3 Set the camcorder to [ mode. Camera Mode] > [N] > [OK] To record video Press Y to begin recording. • Press Y again to pause the recording. • You can also press Y on the optional WL-D89 Wireless Controller. • The ACCESS indicator will flash from time to time while the scene is being recorded. • You can turn on the scene rating option in recording mode with the r > [Rate Scenes (Recording)] setting. To take photos Touch [PHOTO]. • You can record photos simultaneously while recording a movie.
About AUTO mode • Only the following functions are available in mode. - Zoom (A 49). - Quick Start (A 51). - Video snapshot (A 70). - Face detection (A 97) to get beautiful shots of people every time, tracking the subject even if the person moves. - Touch & Track (A 99) to track other moving subjects, keeping them in focus and using the best settings to record them. - Story Creator (A 66) to transform your movies into compelling video stories by following simple scripts for various scenarios.
Smart AUTO icons Background → (color of the icon) Bright* (gray) Subject ↓ Blue skies* (light blue) Vivid colors* (green/red) Sunsets (orange) People (stationary) ( ) ( ) ( ) — People (moving) ( ) ( ) ( ) — Subjects other than people, such as landscapes ( Close objects ) ( / Background → (color of the icon) People (stationary) People (moving) Close objects ) ( ) / ) ( / / ) ( / ) — Dark (dark blue) Subject ↓ Subjects other than people, such as landscapes ( / C /
Intelligent IS Intelligent IS allows the camcorder to select the best image stabilization option based on your shooting method. The Intelligent IS icon will change to one of the following icons. In and modes, you can set the image stabilization manually (A 95).
• When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can adjust the LCD backlight with the q > [LCD Backlight] setting or adjust the brightness of the LCD screen with the q > [LCD Brightness] setting. • Under certain conditions, the Smart AUTO icon that appears on the screen may not match the actual scene. Especially when shooting against orange or blue backgrounds, the Sunset or one of the Blue Skies icons may appear and the colors may not look natural.
Using the Touch Screen’s Zoom Controls 1 Display the zoom controls on the touch screen. [FUNC.] > [ZOOM Zoom] • The zoom controls appear on the left side of the screen. 2 Touch the zoom controls to operate the zoom. Touch anywhere within the T area to zoom out or anywhere within the S area to zoom in. Touch closer to the center for a slow zoom; touch closer to the V/U icons for faster zooms. 3 Touch [X] to hide the zoom controls. NOTES Y P O • Keep at least 1 m away from the subject.
Quick Start When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second*, allowing you to record the subject right away. * The actual time required varies depending on the shooting conditions.
• About standby mode and auto power off: - The camcorder will power off automatically if left in standby mode for 10 minutes. Press P to turn on the camcorder. - You can select the length of time until shut-off or turn off the Quick Start function altogether with the q> [Power Saving Mode] > [Quick Start (Standby)] setting. - The usual 5-minute auto power off setting of [Power Saving Mode] is not applicable while the camcorder is in standby mode.
Video This chapter covers functions related to movies, including playback, advanced shooting, using Story Creator and other advanced functions. For details about basic video shooting, refer to AUTO Mode (A 44). Basic Playback Playing Back Video You can use the s > [Data Code] setting to choose whether to display the recording date (and other information, for AVCHD movies) when you play back videos (A 65). Operating modes: Y P O 1 Press T.
3 Look for the scene you want to play back. Move the zoom lever toward T to show 15 scenes per page; move it toward S to show 6 scenes per page. ! Open the index selection screen. " Memory being read. # Recording date.** $ Division line between recording dates. % Drag your finger left/right for the next/previous index page*. & Display the next/previous index page. ' Scene's timeline (A 63)**. ( 3D Flip View (A 57)**.
During playback: AVCHD movies MP4 movies ! Jump to the beginning of the scene. Double-tap to jump to the previous scene*. " Jump to the beginning of the next scene*. # Pause the playback. $ Fast playback** backward/forward. % Display the volume (A 55) and background music mix balance (A 80) controls. & Stop the playback. ' Decoration (A 71). ( Volume. ) Recording date. C Y P O * Not available for MP4 movies.
During playback pause: ! Resume playback. " Slow playback* backward/forward. # Capture the displayed frame as a photo (A 122)**. $ Decoration (A 71)**. * Touch several times to increase the playback speed 1/8 → 1/4 the normal speed. ** Not available for MP4 movies. IMPORTANT Y P O • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover.
3D Flip View Operating modes: Touch [ ] in the [ Movies] index screen to switch to 3D Flip View. This fun way of displaying scenes grouped by recording date in a 3D layout can be useful to flip through a large number of recordings. Y P O ! Recording date. " Drag your finger left to go to the next date with recordings. # Drag your finger up and down to browse through the scenes recorded in the displayed date. $ Drag your finger right to go to the previous date with recordings.
The [Index Selection] Screen: Selecting the Content to Play Back From the [G Index Selection] screen you can select the content you want to play back (original scenes by date or by story, or photos, for example). 0 You can also select the memory from which you want to play back your recordings. Operating modes: In any index screen: Touch [G]. During single photo view, touch the screen once to display the controls then touch [f] to open the [ Photos] index screen.
NOTES • 0 Fast/slow playback modes are not available for scenes converted to standard definition. Scenes in the [SD Movies] index screen can only be played back at normal speed. • You cannot jump to the previous or next scene with MP4 movies. Two playback modes for AVCHD movies: the [ index screen vs. the gallery Movies] In the [ Movies] index screen you can find all the AVCHD movies you have recorded, conveniently organized by recording date.
3 Delete the scene. [Ý] > [Edit] > [Delete] > [Yes] > [OK] Deleting Scenes from the [ Movies] or [ Movies] Index Screen Operating modes: 1 Open the [ Movies] or [ Movies] index screen. For AVCHD movies, to delete all the scenes recorded on a specific date, drag your finger left/right until the desired date appears in the title bar. 2 Delete the scenes.
Deleting a Single Scene from a Story Operating modes: 1 Open the list of scenes of the story that contains the scene you want to delete. [G] > [ Gallery] > Bring the desired story to the front > [Scene List] 2 In the [Scene List] screen, drag your finger up/down to select the scene you want to delete. 3 Touch the orange [ screen. ] icon on the left to open the [Edit Scene] 4 Delete the scene.
3 Touch one or more of the rating buttons to select all the applicable scenes. • A grayed out rating button indicates that no scenes in the story have been given that particular rating. • The number of selected scenes appears on the screen. • Touch the rating button again to remove those scenes from the selection. 4 Delete all applicable scenes. [Set] > [Yes]* > [OK] > [K] * Touch [Stop] to interrupt the operation while it is in progress. Some scenes may be deleted nevertheless.
IMPORTANT • Be careful when deleting recordings. Once deleted, scenes cannot be recovered. • Deleting a story permanently deletes all the scenes it contains. • When deleting scenes, scenes will be removed from the [ Movies] or [ Movies] index screen and from any stories in the gallery they may have belonged to, regardless of the method used to delete them. • Save copies of important scenes before deleting them (A 138).
3 Touch the desired frame in the timeline ruler to start playing back the scene from that point. ! Touch twice to return to the index screen. " Previous/next scene. # Drag your finger left along the ruler to display the next 5 frames. $ Scene’s recording mode and length. % Recording date and time. & Drag your finger right along the ruler to display the previous 5 frames. ' Current scene / Total number of scenes. ( Currently selected interval between frames.
Onscreen Displays and Data Code With every scene or photo recorded, the camcorder keeps a data code. For AVCHD movies, the data code includes date/time of recording, information about the camera setup, etc. For MP4 movies, the data code is the date of recording. You can choose the information to be displayed. Operating modes: 1 Press . 2 Select the information to be displayed.
Video Stories and Cinema Style Using Story Creator to Create Compelling Stories Story Creator is a helpful function that offers suggestions for typical scenes in a number of situations. With Story Creator, creating interesting video stories is as easy as selecting one of the story themes, such as [Travel], [Party] or [Kids & Pets], and following the suggested categories to record video.
6 Touch [OK]. • A new story will be created and the camcorder will enter record pause mode. The selected story scene category will appear at the bottom of the screen. • If you touch [?], a screen showing the selected theme, story scene (category), shooting advice and the recommended shooting length will appear. Recording a Scene within a Story Press Y to record movies within the selected story scene (category). • Use the displayed recommended length as a reference when recording scenes.
To exit Story Creator mode 1 Press . 2 Touch [ Recording Standard] and then select a different recording standard. NOTES • When recording video snapshot scenes, you can have the camcorder automatically link the length of video snapshot scenes to the recommended length of story scenes with the r > [Video Snapshot Length] setting. • Relay recording is not available during Story Creator mode. Recording Additional Scenes within an Existing Story 1 Press . 2 Start Story Creator mode.
Cinema Mode and Cinema-Look Filters In (cinema) mode, the camcorder will adjust the frame rate and several other picture-related settings to give your recordings a cinematic look. In this mode you can also use a variety of professional cinema-look filters to create unique movies with a distinctive appearance. Operating modes: 1 Press . 2 Set the camcorder to [Camera Mode] > [ mode. ] > [OK] 3 Select the desired cinema-look filter.
Options ( Default value) The camcorder offers 7 cinemalook filters. Select the desired filter while previewing the effect on the screen.
1 Press V. • A blue border appears on the screen. • Press V again to return to normal video recording mode. 2 Press Y. • The camcorder records for a few seconds (the blue frame serves as a visual progress bar*) and then automatically returns to record pause mode. • When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released. * When the recording program is set to [š SCN: Underwater], the visual progress bar will be red.
Decorating Scenes while Recording Operating modes: 1 Open the decoration screen. [FUNC.] > [Ò Decoration] • The decoration screen will open automatically also when you stow the LCD panel with the touch screen facing out. 2 Use a tool from the toolbar as explained in the following procedures. 3 Press Y to record movies with your decorations. You can add decorations even while recording a scene. 4 Touch [X] to exit the decoration screen.
& [Ü]** (Image Mix) Choose one of 27 different frames to add onto the canvas. Image mix can be used in combination with the pens, stamps and animated stamps. ' [Ý]** In recording mode: pause the live video. Touch [Ý] again to restore the live video. You can add decorations to and record the frozen image. In playback mode: pause the playback. Touch [Ð] to resume playing back the scene. ( [ß] Minimize the toolbar to the top of the screen to view almost all of the canvas. Touch [à] to restore the toolbar.
To use [Animated Stamps] 1 Touch [×]. The [Animated Stamps] screen will appear. 2 Touch one of the control buttons. 3 Touch anywhere on the canvas to place the selected animated stamp. You can also drag some animated stamps to a different location. To use [Captions] 1 Touch [Ø]. The [Captions] screen will appear. 2 Touch [Date] or [Time]. When recording a scene using Story Creator, you can also select [Title] (the story’s title) or [Story Scene] (the story scene category).
Decorating Scenes during Playback Operating modes: 1 From the [ Movies] index screen or gallery, play back the scene you want to decorate. 2 Touch the screen to display the playback controls. 3 Touch [Ò] to open the decoration screen. 4 Decorate the scene using the tools from the toolbar as explained in the previous section. In playback mode, the decorations will not be saved with the original recording.
Playing Back Stories from the Gallery You can play back recordings made using Story Creator to play them back as a single compelling video story following the order of the story’s script. Regular scenes and video snapshot scenes recorded without using Story Creator, will appear in the gallery under the [Unsorted] or [Video Snapshot] stories. When playing back stories from the gallery, you can choose to play back only scenes with a certain rating. Operating modes: 1 Open the gallery.
3 Select the rating of the scenes you want to play back. [Story Details] > [Select by Rating] > Desired rating > [K] > [K] 4 Touch the story’s thumbnail to start the playback. • The complete story will be played back from the first scene to the last. When playback ends, the camcorder will return to the gallery. • During the playback of a story other than [Unsorted] or [Video Snapshot], touch the screen and then touch [ë] to display the scene’s category during playback.
Rating Scenes You can rate story scenes immediately after recording them or during playback. You can then select multiple scenes with the same rating, for example, in order to play back or copy only your favorite scenes. Rating Scenes Immediately After Recording Operating modes: 1 Press . 2 Activate the scene rating function.
2 Open the list of scenes of the story that contains the scenes you want to rate. [G] > [ Gallery] > Bring the desired story to the front > [Scene List] 3 In the [Scene List] screen, drag your finger up/down to select the scene you want to rate. 4 Touch the orange [ screen. ] icon on the left to open the [Edit Scene] 5 Touch the control button of the desired rating and touch [K] twice to return to the gallery.
Playback with Background Music You can play back movies (or a photo slideshow) using one of the supplied music tracks from the supplied LEGRIA CD-ROM as background music. Operating modes: The supplied LEGRIA CD-ROM contains 3 music tracks you can use as background music. 0: The music files come pre-installed in the built-in memory. You can mix the original audio and the background music and adjust the background music mix balance to your preference.
! Select the desired music track. " Adjust the background music balance. # Play back the original sound (no background music). $ Delete the music track selected. % Listen to the music track selected. Touch again (Ñ) to stop the playback. 5 Adjust the mix balance between the original sound and the background music. Touch [y] (more of the original sound) or [Û] (more of the background music) or drag your finger along the [Music Balance] bar to adjust the background music balance as desired.
IMPORTANT • If you use copyrighted songs and music tracks in your video creations, remember that music under copyright may not be used without permission from the copyright holder, except for cases permitted under applicable laws, such as for personal use. Make sure to follow applicable laws when using music files. NOTES • Initializing a memory card will permanently erase any music files you may have transferred to the card.
1 Open the list of scenes of the story that contains the scene you want to copy or move. [G] > [ Gallery] > Bring the desired story to the front > [Scene List] 2 In the [Scene List] screen, drag your finger up/down to select the scene you want to copy/move. 3 Touch the orange [ ] icon on the left to open the [Edit Scene] screen and touch [Copy] or [Move]. 4 Select the destination. Drag your finger right/left to select the desired story and touch its thumbnail.
Selecting a Story’s Thumbnail Image Initially, the image used as the story’s thumbnail is the first frame of the first scene in the story. You can set your favorite scene as the thumbnail that will represent the story in the gallery. Operating modes: 1 Open the gallery. [G] > [ Gallery] 2 Select the story whose thumbnail you want to change. Drag your finger right/left to bring the desired story to the front. 3 Open the [Story Thumbnail] screen.
1 Open the gallery. [G] > [ Gallery] 2 Select the story whose title you want to change. Drag your finger right/left to bring the desired story to the front. 3 Open the [Edit Title] screen. [Story Details] > [Edit Story] > [Edit Title] 4 Use the virtual keyboard to change the title. 5 Touch [OK] > [K] > [K] to return to the gallery. C Y P O ! Switch between letters and numbers/special characters. " Change the position of the cursor. # Delete the character to the cursor’s left (backspace). $ Caps Lock.
Advanced Functions Recording in Manual Mode When the camcorder is set to mode, you can enjoy full access to the menus and manually adjust the exposure, focus, white balance and many more of the camcorder’s settings to your preference. Even in this mode, though, the camcorder can help you with the settings. For example, by using Special Scene recording programs (A 92). Operating modes: 1 Press P to turn on the camcorder. • 0 By default, movies and photos are recorded in the built-in memory.
IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. • Be sure to save your recordings regularly (A 135), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.
NOTES • For MP4 movies, you cannot review the last movie recorded if, after you recorded the movie, you performed another operation such as opening a menu. Selecting the Video Quality (Recording Mode) The camcorder offers 5 recording modes for recording AVCHD movies and 2 for MP4 movies. Changing the recording mode will change the recording time available on the memory. For AVCHD movies, select MXP or FXP mode for better movie quality; select LP mode for longer recording times.
NOTES • Movies recorded in MXP mode cannot be saved on AVCHD discs. Use an external Blu-ray Disc recorder to copy MXP movies onto Blu-ray discs. 0 Alternatively, you can use the supplied software VideoBrowser to create AVCHD discs*. • The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the content of the scenes. • You cannot create a video disc of MP4 movies that is playable on commercially available players.
Approximate recording times Default value AVCHD movies in MXP mode are recorded in 1,920 x 1,080 resolution. AVCHD movies recorded using other recording modes are recorded in 1,440 x 1,080 resolution. MP4 movies are recorded in 1,280 x 720 resolution. For AVCHD movies: Recording mode → MXP FXP XP+ SP LP 4 GB Memory card 20 min. 30 min. 40 min. 1 hr. 10 min. 1 hr. 30 min. 8 GB Memory card/ 0 Built-in memory1 40 min. 1 hr. 1 hr. 25 min. 2 hr. 20 min. 3 hr. 16 GB Memory card 1 hr.
Selecting the Frame Rate You can change the frame rate (the number of frames recorded per second) to change the look of your movies. When recording MP4 movies, the frame rate will be [ 25P]. Operating modes: 1 Press . 2 Select the frame rate. [ Other Settings] > r > [Frame Rate] > Desired frame rate > [X] Options ( Default value) [µ 50i (Standard)] Y P O 50 fields per second, interlaced. Standard frame rate of PAL analog TV signals. [¸ PF25] Shooting at 25 frames per second, progressive*.
Special Scene Recording Programs Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. Operating modes: [FUNC.] > [Rec. Programs] > [ú SCN: Portrait] > Desired recording program > [X] Options ( Default value) [ú SCN: Portrait] The camcorder uses a large aperture, to achieve a sharp focus on the subject while blurring the background.
[ÿ SCN: Sunset] To record sunsets in vibrant colors. [Œ SCN: Low Light] To record in low-light situa- tions. [œ SCN: Spotlight] To record spotlit scenes. [Š SCN: Fireworks] To record fireworks. [š SCN: Underwater] Y P O To record underwater scenes in natural colors. [Ÿ SCN: Surface] C To record after getting out of the water, such as on a boat after diving. NOTES • [ú SCN: Portrait]/[û SCN: Sports]/[ý SCN: Snow]/[þ SCN: Beach]: The picture may not appear smooth during playback.
- White points may appear on the screen. - Autofocus may not work as well as in other modes. In such case, adjust the focus manually. • [Š SCN: Fireworks]: - To avoid camera blur (blur due to the camcorder moving) we recommend using a tripod. - When the optional Wide-converter or Tele-converter is attached to the camcorder, autofocus will not be effective.
Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating modes: 1 Press . 2 Select the IS mode.
NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [ Dynamic] or [ Standard]. Pre-Recording The camcorder will start recording 3 seconds before you press Y, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording.
• Any of the following actions will deactivate the pre-recording function. - Leaving the camcorder without any operation for 5 minutes. - Changing the operating mode. - Pressing V. - Opening the decoration screen. - Closing the LCD panel to set the camcorder to standby mode. - Touching any of the following control buttons in the [ Main Functions] panel: [Rec. Programs], [White Balance], [Audio Scene], [AGC Limit], [Faders], [Decoration] or [Review Recording]. - Opening the [Other Settings] menus.
To select the main subject If there is more than one person in the picture, the camcorder will automatically select one person it determines is the main subject. The main subject is indicated by a white face detection frame and the camcorder will optimize the settings for that person. Other faces will have gray frames. Touch a different face on the touch screen to optimize the camcorder’s settings for that person using the Touch & Track function.
Touch & Track When recording a group of people using face detection, the camcorder will automatically detect one person as the main subject. You can use Touch & Track to tell the camcorder to track and optimize settings for a different person. You can also use Touch & Track to always keep in focus other moving subjects, such as pets or moving vehicles. Operating modes: 1 Make sure face detection is activated (A 97). Face detection is always activated in mode.
Faders The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording. Operating modes: [FUNC.] > [R Faders] > Desired fader* > [X] * You can preview the transition effect on the screen. • The icon of the selected fader appears in green. To fade in/out Press Y in record pause mode (Û) to start recording with a fade in.
Manually Setting the Shutter Speed or Aperture [’ Programmed AE] is the default automatic exposure (AE) recording program; using it, you can change functions like the white balance or image effects. Select one of the other AE recording programs to control the shutter speed or aperture. Operating modes: [FUNC.] > [Rec. Programs] > [‚ Shutter-Pri. AE] or [“ Aperture-Pri. AE] > [Ï] or [Ð]* to set the desired shutter speed (‚) or aperture value (“) > [X] * You can also drag your finger along the dial.
• When setting a numeric value (aperture or shutter speed), the number displayed will flash if the aperture value or shutter speed is not appropriate for the recording conditions. In such case, select a different value. • During exposure lock, the aperture value/shutter speed cannot be changed. Set the aperture value or shutter speed before manually adjusting the exposure. Shutter Speed and Aperture Value Guidelines XWith slower shutter speed you can add a nice motion blur and sense of movement.
Manual Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). To correct this, you can adjust the exposure manually or use the Touch AE function to automatically set the optimal exposure for the subject you select. This is convenient when the brightness of the subject you want to shoot is noticeably brighter/darker than the general brightness of the image.
NOTES • If the recording program is changed during exposure lock, the camcorder will return to automatic exposure. • When shooting subjects with a strong light source behind them, the camcorder automatically corrects for the backlight*. You can turn off the automatic backlight correction with the p > [Auto Backlight Correction] setting. Note that the automatic backlight correction is not available in the following cases. - In mode, when using a cinema-look filter other than [Cinema Standard].
Manual Focus Adjustment Autofocus may not work well on the following subjects. In such case, focus manually. • Reflective surfaces • Subjects with low contrast or without vertical lines Operating modes: • Fast moving subjects • Through wet windows • Night scenes POINTS TO CHECK • Adjust the zoom before you start the procedure. • Select a recording program other than [š SCN: Underwater] or [Ÿ SCN: Surface]. 1 Open the manual focus screen. Y P O [FUNC.
3 Touch and hold [F] or [E] to adjust the focus. • The center of the screen will be magnified to help you focus more easily. You can also turn off this function with the p > [Focus Assistance] setting. • The focusing distance displayed will change as you adjust the focus. The focusing distance will be displayed for about 2 seconds. You can change the units used for the distance display with the q > [Distance Units] setting.
POINTS TO CHECK • Select a recording program other than [Š SCN: Fireworks]. [FUNC.] > [ZOOM Zoom] > [W]* (tele macro) > [X] * Touch again to turn off the tele macro function. • The camcorder will automatically adjust the zoom to the telephoto end. NOTES • Any of the following actions will deactivate the tele macro function. - Turning off the camcorder. - Pressing T. - Setting the camcorder to mode. - Zooming out toward T (wide angle). - Changing the recording program to [Š SCN: Fireworks].
To set the custom white balance Point the camcorder at a white object, so it fills the whole screen, and touch [Set WB]. When the adjustment is completed, Å stops flashing and disappears. The camcorder will retain the custom white balance even if you turn it off. Options ( Default value) [Ã Automatic] The camcorder automatically sets the white balance for natural looking colors. [¼ Daylight] To record outdoors on a bright day. [½ Shade] To record in shaded places. [¾ Cloudy] To record on a cloudy day.
Image Effects You can adjust the color depth, brightness, contrast, and sharpness of the image. Operating modes: POINTS TO CHECK • Select a recording program other than the Special Scene recording programs. 1 Open the image effects screen. [FUNC.] > [Image Effects] Y P O 2 Touch [ON] and then touch [Color Depth], [Sharpness], [Contrast] or [Brightness]. Repeat, selecting [OFF], to turn off the image effects. 3 Touch [Ï] or [Ð] or drag your finger along the dial to adjust the effect level.
Self Timer Operating modes: * * For movies only. 1 Press . 2 Activate the self timer. [ Other Settings] > p > [Self Timer] > [i On <] > [X] • < will appear on the screen. • Repeat, selecting [j Off], to turn off the self timer. Movies: In record pause mode, press Y. The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. Y P O Photos: In record pause mode, touch [PHOTO]. • The camcorder will record the photo after a 10-second countdown*.
Audio Scenes and Other Audio Settings You can have the camcorder optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings. This will greatly enhance the sense of "being there." Alternatively, you can select [ Custom Setting] in order to adjust the camcorder's various audio settings to your liking. See Settings for each audio scene (A 112) for the settings used by each audio scene. Operating modes: [FUNC.
NOTES • [ Custom Setting] is not available in mode. • After setting [ Audio Scene] to [ Custom Setting], if the camera mode is changed to , this setting will change to [ Standard]. Settings for each audio scene [ä Mic. Level] [Microphone Attenuator] [Auto Wind Screen] [Built-in Mic Freq.
2 Adjust the auto wind screen. [ Other Settings] > p > [Auto Wind Screen] > [H High] or [L Low ] > [X] • Repeat, selecting [j Off à], to turn off the auto wind screen. NOTES • Some low-frequency sounds will be suppressed along with the sound of wind. When recording in surroundings unaffected by wind or if you want to record low-frequency sounds, we recommend setting the auto wind screen to [j Off à].
Options ( Default value) [h Normal] Appropriate for balanced sound under most normal recording conditions. [ç Boost LF Range] Accentuates the low-frequency range for more powerful sound. [è Low Cut Filter] Filters the low-frequency range to reduce the noise of blowing wind, a car’s engine and similar ambient sounds. [é Boost MF Range] Best for recording human voices and dialog.
Audio Recording Level You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while recording. Operating modes: POINTS TO CHECK • Set [ Audio Scene] to [ Custom Setting] (A 111). Manual Adjustment of the Audio Recording Level 1 Open the manual audio recording level adjustment screen. [FUNC.] > [ä Mic. Level] > [n] (manual) Y P O • The audio level indicator and current audio recording level will appear on the screen.
To display the audio level indicator Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically. [FUNC.] > [ä Mic. Level] > [m] (automatic) > [Audio Level Indicator] > [X] NOTES • When the audio level meter reaches the red point (0 dB), the sound may be distorted.
3 Connect the headphones to the AV OUT/× terminal. 4 Adjust the volume as necessary. [Volume] > [Ô] or [Õ]* to adjust the volume > [X] * You can also drag your finger along the [Headphones] bar. • Ó will appear on the screen. Y P O To adjust the volume during playback In mode, and in mode during slideshow playback, adjust the headphones volume the same way you adjust the speaker’s volume (A 55, 129). IMPORTANT C • When using headphones, make sure to lower the volume to an appropriate level.
Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (A 221). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used. 1 Open the mini advanced shoe cover. 2 Attach the optional accessory to the mini advanced shoe.
Using an External Microphone When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder’s internal machinery. In such case, we recommend using an external microphone. Operating modes: Using the SM-V1 Surround Microphone or DM-100 Directional Stereo Microphone Using the SM-V1 you can add a sense of depth and presence to your recordings with 5.1ch surround sound.
• When using the optional SM-V1 Surround Microphone: - Change the microphone’s directionality mode with the p > [Surround Mic Directionality] setting. - If the sound gets distorted, activate the microphone attenuator with the p > [Surround Mic Attenuator] setting. - You can enjoy the full effect of recordings made with 5.1ch surround sound on HDTVs compatible with 5.1ch surround sound connected to the camcorder using the supplied HDMI cable.
Capturing Video Snapshot Scenes and Photos from a Movie You can capture video snapshot scenes, single photos or a series of continuous photos from a previously recorded scene. For example, you may want to print photos from video recorded at a party or create a small video clip using video snapshot scenes from the highlights of an event. Operating modes: Capturing a Video Snapshot Scene 1 Play back the scene or story from which you want to capture the video snapshot scene.
• When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene. • During the playback of video snapshot scenes captured from a previously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene. Capturing Photos You can capture a single photo or a series of photos.
NOTES • The data code of the photos will reflect the date and time of recording of the original scene. • Photos captured from a scene with a lot of fast movement may be blurred. • Photos will be recorded on the memory selected for recording photos. • [p Photo Sequence]: - Up to 100 photos can be captured at a time. - The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). - Photos will be captured at intervals of 1/25 second.
5 Divide the scene. [µ Divide] > [Yes] • The video from the division point to the end of the scene will appear as a new scene in the index screen. NOTES • When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds. • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
Photos Refer to this chapter for details on viewing photos and other photo-related operations. Viewing Photos Operating modes: 1 Press T. C Y P O 2 Open the [Photos] index screen, if it is not displayed. [G] > [ Photos] 3 Look for the photo you want to play back. Move the zoom lever toward T to show 15 photos per page; move it toward S to show 6 photos per page.
! Open the [G Index Selection] screen (A 58). " Memory being read. # Drag your finger left/right for the next/previous index page*. $ Display the next/previous index page. * While browsing through index pages, a larger scroll bar will appear at the bottom of the screen for a few seconds. When you have a large number of photos it may be more convenient to drag your finger along the scroll bar. 4 Touch the photo you wish to view. • The photo is displayed in single photo view.
Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using the scroll bar. 1 Touch the screen to display the playback controls. 2 Jump through the photos using the scroll bar. [h] > Drag your finger left and right along the scroll bar > [K] IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover.
3 Delete the photo. [Edit] > [Delete] > [ Proceed] > [Yes] 4 Drag your finger left/right to select another photo to delete or touch [X]. Deleting Photos from the Index Screen 1 Open the [ Photos] index screen. [G] > [ Photos] 2 Delete the photos. [Edit] > [Delete] > Desired option* > [Yes]** > [OK] Y P O * When you select [Select], perform the following procedure to select the individual photos you want to delete before touching [Yes].
IMPORTANT • Be careful when deleting photos. Deleted photos cannot be recovered. • Photos that were protected with other devices and then transferred to the memory card when it was connected to a computer cannot be deleted with this camcorder. Slideshow You can play a slideshow of all the photos and even set it to music. Operating modes: 1 Open the [ Photos] index screen. [G] > [ Photos] Y P O 2 Select the music track to use during the photo slideshow. Steps 3 and 4 (A 80).
External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. 0 You can also use the camcorder's convenient Wi-Fi functions (A 155). Terminals on the Camcorder Open the LCD panel to access the terminals on the camcorder. C Y P O 1 AV OUT/× Terminal 2 HDMI OUT Terminal* The HDMI OUT terminal offers a high-quality digital connection that combines audio and video in a single convenient cable. This terminal is an HDMI mini receptacle.
Connection Diagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection ! HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal. If your HDTV supports HDMI-CEC, you can activate this with the q > [Control for HDMI] setting.
Connection " Composite Video Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals.
Connection # USB Type: Digital data connection Output only Connect to a computer to save your recordings, to a compatible digital video recorder to copy your recordings, or to an external hard drive to easily save a perfect copy of an entire memory (0 only).
Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using the HDMI OUT terminal will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. 2 Connect the camcorder to the TV. Refer to Connection Diagrams (A 131) and select the most appropriate connection for your TV. 3 Turn on the connected TV. On the TV, select as the video input the same terminal to which you connected the camcorder.
Saving and Sharing Your Recordings 0 Copying Movies and Photos to a Memory Card You can copy your recordings from the built-in memory to a memory card. Scenes and photos will be copied from the index screen or from a story in the gallery in the built-in memory to the same index screen or story on the memory card. Please read the IMPORTANT section (A 138) before using an Eye-Fi card.
Options [date] Copy all the scenes recorded on the date shown in the control button. For AVCHD movies only. [Select] Select individual scenes to copy. [All Scenes] Copy all the scenes. Copying Scenes from a Story by Rating Operating modes: 1 Open the gallery and bring the desired story to the front. [G] > [ Gallery] > Desired story • Check that you have selected the & (built-in memory) tab. Y P O 2 Select the rating of the stories you want to copy.
3 Copy the photo. [Edit] > [Copy (&'*)] > [¨ Proceed] > [Yes] 4 Drag your finger left/right to select another photo to copy or touch [X]. Copying Photos from the Index Screen Operating modes: 1 Open the [ Photos] index screen. Check that you have selected the & (built-in memory) tab. 2 Copy the photos. Y P O [Edit] > [Copy (&'*)] > Desired option* > [Yes]** > [OK] * When you select [Select], perform the following procedure to select the individual photos you want to copy before touching [Yes].
IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. • When copying photos onto an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use.
Saving AVCHD Movies (Windows only) With the supplied software VideoBrowser (0 only) or Transfer Utility (1 only), you can save to your computer the scenes you have recorded. Installation Install the software before you connect the camcorder to the computer for the first time. Refer to the Startup Guide (supplied leaflet) and follow the instructions in the Software Guide (PDF file) to install the supplied PIXELA’s software.
Saving MP4 Movies and Photos (Windows/Mac OS) With the supplied software ImageBrowser EX you can save MP4 movies and photos to your computer and easily organize them. The main system requirements are as follows. OS Windows 7 (SP1, 32/64-bit) CPU Memory Intel® Core™ 2 Duo, 1.66 GHz 1 GB (for 32-bit) 2 GB (for 64-bit) Windows Vista (SP2, 32/64-bit) 1 GB Windows XP (SP3, 32-bit only) 1 GB Mac OS X v10.6 Intel® Core™ Duo, 2.
6 Follow the onscreen instructions. For Windows users, the User Account Control window appears, follow the instructions to continue. To check that the software was installed correctly You can check that the software was installed correctly by looking for the ImageBrowser EX icon in the following location. Windows: From the Start Menu, All Programs > Canon Utilities > ImageBrowser EX Mac OS: In the Dock, on the Desktop.
IMPORTANT • When the camcorder is connected to a computer: - Do not open the memory card slot cover and do not remove the memory card. - Do not access, change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data loss. Always use only the supplied software to save your recordings on the computer and, if necessary, to transfer previously saved video files to a memory card connected to the computer.
0 Memory Save: Saving an Entire Memory onto an External Hard Drive You can easily save all the movies and photos you recorded onto a commercially available external hard drive connected directly to the camcorder*. You can also use the camcorder to play back your recordings directly from the hard drive. Initialize the hard drive (A 146) when you use it with this camcorder for the first time.
Before disconnecting the external hard drive Before turning off or physically disconnecting the external hard drive, be sure to safely end the connection to the camcorder to avoid damage to your files. From the [External Hard Drive] screen: [Safely Remove Hard Drive] > [Yes] IMPORTANT • Make sure you power the camcorder with the compact power adapter before you save a memory to the external hard drive.
4 Touch [Play Back from Hard Drive] and select the memory save folder you wish to play back. • If you performed multiple memory save operations on the same day (for example, if you saved the built-in memory and then a memory card), the folder name of memory save folders following the first one will end in a numerical suffix. • The [ Movies] index screen will appear. 5 Play back the movies, stories and photos as you would do any other memory.
Initializing the External Hard Drive 1 Power the camcorder using the compact power adapter. Do not disconnect the power source or turn off the camcorder until the initialization is completed. 2 Press T to set the camcorder to playback mode. 3 Connect the camcorder to the external hard drive using the optional UA-100 USB Adapter. Connection #-2. Refer to Connection Diagrams (A 133). 4 Press . 5 Initialize the external hard drive.
Copying Recordings to an External Video Recorder Operating modes: In High Definition Connect the camcorder to Blu-ray Disc recorders and other AVCHDcompatible digital video recorders using the supplied USB cable to make perfect copies of your movies in high definition. If the external digital video recorder has an SD memory card slot*, you can use the memory card to copy your movies without connecting the camcorder. * Make sure the external device is compatible with the type of memory card used.
Connecting Connect the camcorder to the VCR using Connection " or ,. Refer to Connection Diagrams (A 132). Recording 1 External recorder: Load a blank cassette or disc and set the recorder to record pause mode. 2 Turn on the camcorder and set it to mode. • We recommend powering the camcorder using the compact power adapter. • Verify that q > [AV/Headphones] is set to [Ò AV]. 3 Camcorder: Locate the scene or story you wish to copy and pause the playback shortly just before the desired scene.
Installation Install the software before you connect the camcorder to the computer for the first time. Refer to the Startup Guide (supplied leaflet) and follow the instructions in the Software Guide (PDF file) to install the supplied PIXELA’s software. Converting Scenes into Standard Definition from the [ Screen Movies] Index Operating modes: 1 Power the camcorder using the compact power adapter. 2 Make sure there is a memory card in the memory card slot with sufficient available space.
7 Touch [OK]. Connect the camcorder to the computer at this point (A 151) to continue uploading the converted videos to the Web. To select individual scenes (step 4) 1 Touch on the individual scenes you want to convert. • A checkmark ! will appear on the scenes you touch. The total number of selected scenes will appear next to the " icon. • Touch a selected scene to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes]. 2 After selecting all the desired scenes, touch [OK].
2 Select the rating of the stories you want to convert. [Story Details] > [Select by Rating] > Desired rating > [K] 3 Touch [Edit Story] > [Convert HD'SD (%)] and continue the conversion to standard definition from step 5 in the previous procedure (A 149). NOTES • When converting scenes from a story: - All the scenes are merged into one converted SD movie. - If the converted SD movie is too large, it will be split into smaller 10-minute long movies.
IMPORTANT • While the camcorder is connected to the computer, do not open the memory card slot cover and do not remove the memory cards. • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the USB cable. - Do not disconnect the compact power adapter or turn off the camcorder or the computer.
2 Convert the desired movies (A 149). • If you are within the range of a configured network, Web upload will start automatically.
• While using an Eye-Fi Card, the ACCESS indicator may flash from time to time. • Wireless communication via the Eye-Fi card is available only in playback mode. Any wireless transfer in progress will be stopped if you set the camcorder to recording mode. • 0 Wireless communication via the Eye-Fi card is not available when using the camcorder's Wi-Fi functions. • You can turn off the wireless communication with the q > [Eye-Fi Communication]* setting.
0 Wi-Fi Functions This chapter contains information about how to operate the Wi-Fi functions of your camcorder, starting with the Wi-Fi network setup needed to add your camcorder to an existing Wi-Fi network. Introduction to Wi-Fi The camcorder's Wi-Fi functions allow you to send files wirelessly, which means that you will not need to fuss with cables.
Wi-Fi connection Ad hoc mode Connect the camcorder to an iOS device (A 167). Use this connection type if you plan to upload videos to YouTube and Facebook on the go (A 166). iOS device Wi-Fi connection Infrastructure mode Connect the camcorder to an access point on a Wi-Fi network (A 157). Use this connection if you plan to play back videos on a DLNA-compatible TV (A 170) connected to the network using a LAN cable.
Connecting to a Wi-Fi Network Wirelessly connecting to a Wi-Fi network via an access point (wireless router) is commonly referred to as infrastructure mode. If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be easy and require minimal configuring. Refer to Wi-Fi Protected Setup below. If your wireless router does not support WPS or you wish to manually configure settings, refer to Manual Setup (A 160).
Operating modes: Wi-Fi Protected Setup (WPS) To use WPS to make a connection using infrastructure mode, make sure your wireless router has the WPS logo. If your wireless router has a WPS button, setup will be easy and all automatic. Some wireless routers that support WPS do not have a dedicated button but use a PIN code instead. Both cases are explained in the following procedure. For setup using a PIN code, you will need to know in advance how to activate the wireless router's WPS function.
4 Within 2 minutes, touch [OK] on the camcorder's screen. You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. 5 Touch [Automatic] to automatically obtain an IP address. • To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address below. • A screen to test the settings will appear. 6 Select whether to test the settings. • You can touch [Check Current Configuration] to review the network settings.
Manual Setup Perform this procedure to wirelessly connect the camcorder to the wireless router (using infrastructure mode) if your router does not support WPS, you wish to manually configure settings, or if your wireless router's network name (SSID) cannot be detected due to the stealth function being enabled. To enter text for the various settings, use the virtual keyboard (A 85). POINTS TO CHECK • You may need to know in advance the encryption key and other settings of the wireless router.
4 Touch the [Encryption Key] control button to enter the encryption key or password of the wireless access point and then touch [OK]. • If the encryption method of the wireless access point is set to WEP, the WEP index key will appear on the screen. Select the same index key of the access point. 5 Touch [Automatic] to automatically obtain an IP address. • To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address (A 159).
NOTES • The functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use. • When using Wi-Fi functions, wireless communication with an Eye-Fi card is not possible. Transferring Files to a Computer or FTP server You can wirelessly transfer recordings directly to a computer running the supplied software Network Utility (Windows only) or an FTP server.
For FTP servers: • Correctly configured FTP server, such as a Macintosh computer or network-attached storage (NAS) drive. You will need to enter the IP address, port, user name, password and file transfer destination as part of the manual setup. Operating modes: File Transfer Destination Setup for Windows Computers 1 Power the camcorder using the compact power adapter. 2 Set the camcorder to playback mode and then press . 3 Connect the camcorder to the Wi-Fi network.
File Transfer Destination Setup for FTP Servers 1 Set the camcorder to playback mode and then press . 2 Connect the camcorder to the Wi-Fi network. [ Wi-Fi] > [Wi-Fi Setup] > [Transfer Destination Setup] > [FTP Server] 3 Enter the details of the FTP server.
4 Select the memory that contains the recordings you wish to transfer wirelessly and touch [OK]. • You can select more than one memory. • Touch [All files] to transfer all the recordings, or [New files] to transfer only those recordings that have not been previously transferred. • Once connected, the wireless transfer will begin automatically. • You can touch [Stop] and then [X] to cancel the wireless transfer while it is in progress. 5 Touch [OK].
Uploading Recordings to YouTube and Facebook You can upload movies to YouTube and movies and photos to Facebook using the supplied software Network Utility running on a Windows computer. Access point Computer POINTS TO CHECK • If you have not done so already, complete the Wi-Fi network setup (A 157) and file transfer destination setup (A 162) in advance.
3 If you are uploading to YouTube, read the YouTube agreement carefully and touch [I Agree] if you agree. 4 Touch the desired connection point to connect the camcorder to the network and then touch [OK]. Once connected, or if only one connection point has been set up, the wireless upload will begin automatically. You can touch [Stop] and then [X] to cancel the wireless upload while it is in progress. 5 Touch [OK].
2 Set up a new connection point. [ Wi-Fi] > [Wi-Fi Setup] > [Network Setup] > [ > [Set Up New]* ] * To replace the current settings, touch [Edit] instead and then manually change the settings. To delete the settings, touch [Delete] and then [Yes]. 3 Enter the details of the connection.
Uploading Videos 1 Camcorder: Set the camcorder to playback mode and then press . 2 Camcorder: Select the ad hoc Wi-Fi connection. [ Wi-Fi] > [DLNA Media Server]* > [ ] > [OK] * If the memory card slot cover is open, the option will not be available. Make sure the cover is closed properly. 3 Camcorder: Touch [OK]. The camcorder will connect as a media server. 4 iOS device: Touch Settings > Wi-Fi and then turn Wi-Fi on. A list of active networks will appear.
Wireless Playback on a DLNA-Compatible Device If you have a DLNA-compatible player, such as an HDTV, on your home network, you can watch your recordings* wirelessly. In such case, the camcorder acts as a digital media server (DMS) and the HDTV acts as a digital media player (DMP). From the HDTV, you can easily search for recordings in the camcorder and play them back. * Many DLNA players do not support playback of MP4 movies.
3 Camcorder: Touch the desired connection point and then touch [OK]. 4 DLNA Digital Media Player: Select your camcorder model from the list and then play back your recordings. • The ACCESS indicator blinks during the connection. • Refer to the DLNA device's instruction manual for details on the procedure. 5 Play back the videos in the folder that appears (built-in memory or memory card). 6 Camcorder: When you have finished playing back, touch [End] to end the Wi-Fi connection.
NOTES • Playback may not appear smooth depending on the wireless router's settings and capability. In such case, try the following. - Remove any objects between the camcorder and wireless access point that may interfere with the wireless signal. - Move the camcorder closer to the wireless access point. - Turn off the wireless functions of other wireless devices other than the DLNA-compatible device being used for playback. - Switch the wireless access point to IEEE 802.11n and activate channel bonding.
Glossary This is a glossary of some of the basic terms used frequently in this chapter. The documentation for your wireless router may also contain a glossary you can refer to. Access point A wireless access point (WAP) is a device that allows wireless devices, like your camcorder, to connect to a wired network (including to the Internet) using the Wi-Fi standard. In most cases, this will be your wireless router.
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (A 27). For details about each function, see the reference page. Menu options without a reference page are explained after the tables. Underlined menu options indicate default values.
Control Button AUTO n Setting options/Function A [È Powered IS]1 [ON], [OFF] z z z [ZOOM Zoom] Zoom controls, [START]/[STOP] control z z z 50 [W] (tele macro): Toggle on or off – z z 106 z z z 111 [ Audio Scene] [ [ [ Standard], [ Music], [ Forest and Birds], Noise Suppression] [ Custom Setting] [ä Mic.
[Edit] Panel - Control Button Mode [ Movies] Index Screen [ [zSD Movies] Movies] Index Screen Index Screen Playback Pause A 0 From the built-in memory: [Copy (%)] , [Select], [All Scenes] [Select], [All Scenes] – – 135 0 From the built-in memory: [Convert HD'SD (%)] , [Select], [All Scenes] – – – 149 [Delete] , [Select], [All Scenes] [Select], [All Scenes] [This Scene], [All Scenes] [This Scene] 59 [Divide] 0 [ Network Utility] Y P O – – – z* 123 YouTube, Fac
In the gallery: [Edit Story] from the [Story Details] screen [Edit Scene] from the [Scene List] screen Playback Pause A 0 From the built-in memory: [Copy (%)] – – 136 0 From the built-in memory: [Convert HD'SD (%)] – – 150 [Delete] or [ [This Scene] [This Scene] 59 Control Button ] [Delete Story]* z [Story Thumbnail]* z [Edit Title]* z [Copy] – [Move] – [Divide] – [Rating] – – C – 62 – – 84 – – 84 z – 82 z
[ Other Settings] Menus When the camcorder is in the p menu.
Menu item n Setting options A [Built-in Mic Directionality]1 [í Monaural], [h Normal], [î Wide], [ï Zoom] z z 114 [Surround Mic Directionality]1, 2, 3 [ò Surround], [ó Zoom], [ô Shotgun] z z – [Surround Mic Attenuator]1, 2, 3 [i On å], [j Off] z z – 1 Option available only for recording movies. 2 Option available only when the optional SM-V1 Surround Microphone is attached to the camcorder after having updated the camcorder’s firmware using the memory card supplied with the SM-V1.
[Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting. • Minimum shutter speed used: 1/25; 1/12 when the frame rate is set to [¸ PF25] or [ 25P]. • The auto slow shutter can only be activated when the recording program is set to [’ Programmed AE], but the setting will not change even if you set the camcorder to mode. • If a trailing afterimage appears, set the slow shutter to [j Off].
[ô Shotgun]: Records monaural audio with a highly directional setting that is most sensitive to sound coming directly from the front of the camcorder/microphone. [Surround Mic Attenuator]: Helps prevent audio distortions due to high audio recording levels when the optional SM-V1 Surround Microphone is attached to the camcorder. When set to [i On å], å will appear on the screen.
r Recording & Connections Setup Menu item y Setting options A 0 [Rec Media for Movies] [&] (built-in memory), [*] (memory card) z z – – [Relay Recording]: [j Off], [%] z – – – [Recording Mode] [© High Quality 24 Mbps], [¨ High Quality 17 Mbps], [¦ High Quality 12 Mbps], [¤ Standard Play 7 Mbps], [¥ Long Play 5 Mbps] z – – – [ – z – – 9 Mbps], [ 4 Mbps] 39 88 Rate]1 [µ 50i (Standard)], [¸ PF25] z – – – 91 0 [Rec Media for Photos] [&] (built-in memory), [*] (memory card)
Menu item 0 [External Hard Drive Info]3 1 2 3 y Setting options – – – z A z – Option not available in mode. Option available only for AVCHD movies. This is the only option available when an external hard drive is connected to the camcorder. [Rate Scenes (Recording)]: When set to [i On], the scene rating scene will appear after every scene you record.
[n Continuous]: File numbers will continue from the number following that of the last file recorded with the camcorder. • If the memory card you insert already contains a file with a larger number, a new file will be assigned a number one higher than that of the last file on the memory card. • We recommend using the [n Continuous] setting. • The file number indicates the name and location of the file on the memory card. For example, the file name of a photo numbered 101-0107 is “IMG_0107.
Menu item y Setting options A [Notification Sounds] [÷ High Volume], [ø Low Volume], [j Off] z z z z – [Wireless Remote Control] [i On], [j Off 0] z z z z – [Custom Control Button]1 [Rec. Programs], [Ä White Balance], [< Focus], [y Exposure], [Ç Powered IS], [R Zoom], [ Audio Scene], [ä Mic.
Menu item y Setting options A [Date/Time] [Date/Time]: – [Date Format]: [Y.M.D], [M.D,Y], [D.M.Y] (Y- year, M- month, D- day) [24H]: Toggle on (24-hour clock) or off (12-hour clock) z z z z 33 [Battery Info] – z z z z – [Control for HDMI]1 [i On], [j Off] z z z z – [HDMI Status]1 – z z z z – [Distance Units]1 [.
[LCD Mirror Image]: When set to [i On], you can rotate the LCD panel 180 degrees to let the subject check the image while you record. While the LCD panel is rotated toward the subject you will not be able to decorate the scene. [Notification Sounds]: A beep will accompany some operations like turning on the camcorder, the self-timer countdown, etc. • Set this to [j Off] to turn off notification sounds. • While pre-recording (A 96) is activated, the camcorder will not emit any notification sounds.
[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option displays a screen where you can verify the battery charge (as a percentage) and the remaining recording time ( , mode) or playback time ( , mode). [Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Control) function. When you connect the camcorder to an HDTV compatible with HDMI-CEC using the supplied HDMI cable, you can control the camcorder’s playback using the remote control of the TV.
[Firmware]: You can verify the current version of the camcorder’s firmware, which is the software that controls the camcorder. This menu option is usually unavailable. [Reset All]: Resets all of the camcorder's settings.
Appendix: Onscreen Icons and Displays Recording Movies (using Story Creator) 1 Control button [FUNC.
Recording Movies Manual mode Cinema mode h A Recording program (A 92) A Manual exposure (A 103) j k A AGC (automatic gain control) limit (A 104) l A = Instant AF/@ Normal AF (A 179), MF Manual focus (A 105) q Face detection (A 97) S a S White balance (A 107) s S Audio level indicator (A 115) d x.v.
Playing Movies (during playback) AVCHD movies: MP4 movies: C f Eye-Fi wireless communication F (A 152) g Scene number F h Playback control buttons (A 55) F 192 Additional Information Y P O F Data code (A 65, 181) j k Volume and background music F balance controls (A 55, 81) l File number (A 183) F q Volume controls (A 55) G
Viewing Photos a G Control button [Edit]: Open the Edit panel (A 177) s G Current photo / Total number of photos C d Control button [h]: Photo jump G (A 127) f Control button [Ð]: Slideshow G (A 129) g Control button [f]: Return to the G [ Photos] index screen (A 125) Y P O Additional Information 193
7 Memory operation Ü Record, Û Record pause, Ð Playback, Ý Playback pause, × Fast playback, Ø Fast reverse playback, Õ Slow playback, Ö Slow reverse playback, Ó Frame advance, Ô Frame reverse. 9 Remaining battery time • The icon shows a rough estimate of 100% 75% 50% 25% 0% the remaining charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon.
Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
Cannot charge the battery pack. - Make sure the camcorder is off so charging can start. - The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again. - Charge the battery pack in temperatures between approximately 0 °C and 40 °C. - The battery pack is faulty. Replace the battery pack. - The camcorder cannot communicate with the battery pack attached.
Movies or photos cannot be recorded properly. - This may occur as movies and photos are recorded/deleted over time. Save your recordings (A 138) and initialize the memory (A 40). Cannot record a photo while recording movies. - You cannot take photos in mode, while the digital zoom is activated (A 49) or while fading in or fading out a scene (A 100). After using the camcorder for a long time, it becomes hot.
When playing back scenes/slideshow with background music, the music track is not played back correctly. - This can occur when you transfer the music files to a memory card after repeatedly recording and deleting scenes (fragmented memory). Save your recordings (A 138) and initialize the memory card (A 40). Then, transfer the music files first and only then transfer the video files.
The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-second intervals). - The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again. - Charge the battery pack in temperatures between approximately 0 °C and 40 °C. - The battery pack is damaged. Use a different battery pack. - Charging has stopped because the compact power adapter or the battery pack is faulty.
The picture is displayed correctly but there is no sound from the built-in speaker. - Speaker volume is turned off. Adjust the volume. - If the HTC-100/S HDMI Cable or optional STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. - The AV terminal is set to headphone output. Set r> [AV/Headphones] to [AV]. Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it.
Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input.
0 Wi-Fi Functions Refer also to the instruction manual of your wireless router and other devices you will use. Wireless playback on a DLNA-compatible device is not smooth. - Playback may not be smooth depending on the wireless router's settings and capability. - In the [Wi-Fi] menu, set [w] to [On] (A 171) to play back the movie in standard definition. - Remove any objects between the camcorder and wireless access point that may interfere with the wireless signal.
List of Messages (in alphabetical order) 0 Refer to List of Messages for Connecting to an External Hard Drive (A 209) for external hard drive related messages. Refer to List of Messages for Wi-Fi Functions (A 210) for Wi-Fi related messages. Refer to List of Messages for the Optional Video Light (A 209) for video light related messages. Back up recordings regularly - This message may appear when you turn on the camcorder.
Cannot copy - The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete some recordings on the memory card (A 59, 127) or reduce the number of scenes to copy. - The memory card already contains the maximum number of AVCHD scenes (3,999 scenes). Delete some scenes (A 59) to free some space. - The gallery already contains the maximum number of stories (98 stories in any one given memory). Delete some stories (A 62) to free some space. 0 Cannot divide the scene.
Cannot record - You cannot capture video snapshot scenes from scenes recorded or edited using another device and then transferred to a memory card connected to the computer. - There is a problem with the memory. If this message appears often without apparent reason, contact a Canon Service Center. 0 Cannot record Cannot access the built-in memory - There is a problem with the built-in memory. Save your recordings (A 138) and initialize the built-in memory using the [Complete Initialization] option (A 40).
Do not disconnect the power source. Do not disconnect the USB cable unless you first use the computer to safely end the connection. - When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder.
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card. - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. No memory card - Insert a compatible memory card into the camcorder (A 38). - The memory card may not be inserted correctly.
0 Some scenes could not be converted - Some scenes selected for conversion to SD were recorded using another device and then transferred to a memory card connected to the computer. These scenes were not converted. - Among the scenes selected for conversion to SD there are scenes recorded with another device using 24p frame rate and then transferred to a memory card connected to the computer. When converting scenes to SD, leave out scenes recorded using another devices.
Unsupported gallery data detected. Cannot record or edit. Delete gallery data? - The gallery data of the movies in the selected memory card is not supported. The movies can be played back but you cannot edit them or record additional scenes to this gallery. Select [Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to play back the movies with the device originally used to record the unsupported gallery data.
0 List of Messages for Wi-Fi Functions An error occurred during FTP communication File transfer was not completed - Turn off the camcorder and FTP server. After a short while, turn them on again and try to send the data again. An error occurred while communicating to the computer (Network Utility) File transfer was not completed - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal.
Check the Wi-Fi settings. - Make sure the camcorder and wireless router are correctly configured. IP address conflict - Change the camcorder’s IP address so that it does not conflict with the IP addresses of other devices connected to the same network. Multiple access points detected. Try the operation again. - There are multiple wireless routers (access points) sending out a WPS signal at the same time. Try the operation again later or perform Wi-Fi Protected Setup using the PIN code option.
Unable to complete WPS. Try the operation again. - Some wireless routers require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your wireless router. - Make sure to touch [OK] on the camcorder’s screen within 2 minutes of activating the Wi-Fi Protected Setup signal on the wireless router, whether by pressing the button or by entering the PIN code.
Wi-Fi error Incorrect encryption method - Make sure the camcorder and wireless router are using the same encryption method. - If the wireless router is using MAC address filtering, enter the camcorder’s MAC address in the wireless router’s configuration screen. Wireless communication is not working correctly - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camcorder in a location farther away from such appliances.
Do’s and Don’ts Handling Precautions Camcorder Be sure to observe the following precautions to ensure maximum performance. • Save your recordings periodically. Make sure to transfer your recordings to an external device such as a computer or digital video recorder (A 135) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel.
• Do not point the lens at strong light sources. Do not leave the camcorder pointed at a bright subject. • Do not use or store the camcorder in dusty or sandy places. The camcorder is not waterproof – avoid also water, mud or salt. If any of the above should get into the camcorder it may damage the camcorder and/or the lens. • Be careful of heat generated by lighting equipment. • Do not disassemble the camcorder. If the camcorder does not function properly, consult qualified service personnel.
Battery Pack DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C. Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. • Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth.
Memory Card • We recommend backing up the recordings on the memory card onto your computer. Data may be corrupted or lost due to memory card defects or exposure to static electricity. Canon shall not be liable for lost or corrupted data. • Do not touch or expose the terminals to dust or dirt. • Do not use memory cards in places subject to strong magnetic fields. • Do not leave memory cards in places subject to high humidity and high temperature.
Disposal When you delete movies or initialize the memory, only the file allocation table is altered and stored data is not physically erased. When you dispose of the camcorder or memory card or give either to another person, initialize the camcorder's built-in memory (0 only) or memory card using the [Complete Initialization] option (A 40). Fill it up with unimportant recordings, and then initialize it again using the same option. This makes recovering the original recordings very difficult.
Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. • Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper.
To avoid condensation • Do not expose the camcorder to sudden or extreme changes in temperature. • Remove the memory card and battery pack. Then, place the camcorder in an airtight plastic bag and let it adjust gradually to temperature changes before removing it from the bag. When condensation is detected The camcorder automatically shuts off. The precise time required for water droplets to evaporate will vary depending on the location and weather conditions.
General Information Accessories (Availability differs from area to area) 3 1 5 6 2 8 7 9 4 A q A a Computer Card reader/writer A s A d A j External hard drive* A f Y P O A k A g A l A h C TV/HDTV SCART Adapter S q Digital video recorder S a Optional accessories not listed below are described in more detail in the following pages.
NOTES • Accessories that are compatible with the Advanced Accessory Shoe cannot be attached to this camcorder. Look for the Mini ADVANCED SHOE logo to ensure compatibility with the mini advanced shoe. Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
5 CG-700 Battery Charger Use the battery charger to charge the battery packs. Charging, Recording and Playback Times The charging times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. Battery pack→ BP-718 BP-727 Using the camcorder 310 min. 450 min. Using the CG-700 Battery Charger 220 min. 315 min.
0 Recording AVCHD movies using the built-in memory Battery pack BP-718 BP-727 Recording mode Recording (maximum) Recording (typical)* Playback MXP 120 min. 75 min. 190 min. FXP 125 min. 80 min. 190 min. XP+ 125 min. 80 min. 195 min. SP 130 min. 80 min. 195 min. LP 130 min. 80 min. 200 min. MXP 185 min. 115 min. 285 min. 285 min. FXP 185 min. 120 min. XP+ 190 min. 120 min. 290 min. SP 195 min. 120 min. 295 min. LP 195 min. 125 min. 305 min.
7 TL-H43 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance at full telephoto with the TL-H43 is 3.3 m. 8 WD-43 Wide-converter This Wide-converter lens decreases the focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views.
g A VL-5 Video Light This video light enables you to record brightly in color even in dark places. It attaches to the camcorder’s mini advanced shoe for cable-free operation. h A VFL-2 Video Flash Light This video flash light allows you to record photos and movies even at night or in dark places. It attaches to the camcorder’s mini advanced shoe for cablefree operation. • The VFL-2 cannot be used as a flash with this camcorder.
a S SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Specifications LEGRIA HF M56 / LEGRIA HF M506 — Values given are approximate figures. System • Recording System Movies: AVCHD MP4 Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* Video compression: MPEG-4 AVC/H.264 Audio compression: MPEG-2 AAC-LC (2ch) * Only when using the optional SM-V1 Surround Microphone. Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.3 Image compression: JPEG * This camcorder supports Exif 2.
• LCD Touch Screen: 7.51 cm (3 inch), wide, TFT color, 230,000 dots, touch operation • Microphone: Stereo electret condenser microphone with multiple directionality settings • Lens f=6.1-61 mm, F/1.8-3.0, 10x optical zoom, iris aperture 35 mm equivalent: 43.
0 Wi-Fi • Standard: Complies with the IEEE 802.11b/g/n protocol • Frequency: 2.4 GHz • Supported channels: 1 - 13 • Encryption methods: WEP-64/WEP-128, TKIP/AES Power/Others • Power supply (rated) 3.6 V DC (battery pack), 5.3 V DC (compact power adapter) • Power consumption 2.
BP-718 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System • Rated voltage: 3.6 V DC • Operating temperature: 0 – 40 °C • Battery capacity: 1,840 mAh (typical); 6.5 Wh / 1,790 mAh (minimum) • Dimensions: 30.3 x 24.9 x 40.1 mm • Weight: 42 g About the music files The specifications of the music files compatible with the camcorder are as follows.
Index 3D Flip View . . . . . . . . . . . . . . . . .57 A Abroad, using the camcorder . . . . 220 AGC (automatic gain control) limit . . . . . . . . . . . . . . . . . . . . . 104 Aperture (f number) . . . . . . . . . . . 101 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . 181 Audio recording level . . . . . . . . . . 115 Audio scene select . . . . . . . . . . . 111 Audio settings . . . . . . . . . . . . . . . 111 AUTO mode . . . . . . . . . . . . . . . . .44 Auto slow shutter . . . .
Intelligent IS . . . . . . . . . . . . . . . . . 48 R L Rating scenes . . . . . . . . . . . . . . . . 78 Recording Movies . . . . . . . . . . . 44, 69, 86 Photos . . . . . . . . . . . . . . 44, 86 Recording mode . . . . . . . . . . . . . . 88 Recording programs . . . . . . . 92, 101 Recording standard (AVCHD/MP4) . . . . . . . . . . . . . . 30 Recording time . . . . . . . . . . . . . . . 90 Relay recording . . . . . . . . . . . . . . 39 Remote sensor . . . . . . . . . . . . . . .
Touch AF . . . . . . . . . . . . . . . . Touch screen operations . . . . Tripod . . . . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . Turning off notification sounds Tv (recording program) . . . . . . . . . 105 . . . .26 . . . 215 . . . 195 . . . 187 . . . 101 Wide angle . . . . . . . . . . . . . . . . . . 49 Wi-Fi functions* . . . . . . . . . . . . . 155 Wireless controller . . . . . . . . . . . . . 42 Y YouTube* . . . . . . . . . . . . . . . . . .
Canon Europa N.V. Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands www.canon-europa.com Canon UK Ltd CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, United Kingdom Telephone 0844-369-0100 Canon Australia Pty Ltd Tel: 13-13-83 (within Australia only) (61) 02-9805-2555 www.canon.com.au Y P O Canon New Zealand Ltd Tel: 0800-222-666 (within New Zealand only) (64) 09-489-0300 www.canon.co.nz C Canon Singapore Pte.
