Specifications

CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
6.3 Remedying Typical Troubles
This section describes troubles that may occur during scanning and how to
remedy that trouble. Before you ask for repair, check the following flowcharts. If
the remedies in these flowcharts do not solve the problem, check the items in "
6.3
Items to Check Before Contacting the Agent Where You Bought the Scanner" and
then contact the agent where you bought the scanner or an authorized FUJITSU
service provider.
Scanner cannot be turned ON.
Indication on Function No. display goes out.
The scanning does not start.
Quality of scanned pictures or photos is not satisfactory.
Quality of scanned text or lines is unsatisfactory.
Images are distorted or blurred.
Vertical lines appear in the scanned image.
The Function No. display indicates alarm after the scanner is turned ON.
Multi feed errors occur frequently.
Pickup errors occur frequently.
Paper jams occur frequently
The scanned images are elongated
There is a shadow on the top and bottom edge of the scanned images.
CONTENTS