MULTIMEDIA PROJECTOR User’s Manual ] Projection lens not included.
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Functionally Rich This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc.
Table of Contents Features and Design . . . . . . . . . . . . . . . . Table of Contents . . . . . . . . . . . . . . . . . . . To The Owner . . . . . . . . . . . . . . . . . . . . . . Safety Instructions . . . . . . . . . . . . . . . . . 2 3 4 5 Air Circulation 8 Installing the Projector in Proper Directions 9 Moving the Projector 10 Cautions in Handling the Projector 10 Compliance . . . . . . . . . . . . . . . .
To The Owner Before installing and operating the projector, read this manual thoroughly. The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.
Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This projector should be operated only from the type of power source indicated on the marking label.
Safety Instructions WARNING Immediately turn the power off, unplug the projector, and contact your dealer under the following conditions, otherwise a fire or an electric shock may result. – If smoke comes out from it. – If it emits a strange odor, or makes a strange noise. – If lamp goes out with a loud bang. – If water or any other liquid gets into it. – If metal or foreign objects get inside it. – If it is knocked down or dropped and the cabinet is broken.
Safety Instructions – Remove the batteries when they have been exhausted or not in use for an extended period of time. – Be sure to replace both batteries at the same time. Do not mix batteries of different types. – Insert batteries correctly according to the “+” and “-“ markings. – If a fluid from a battery leaks and comes in contact with your skin, rinse the affected skin thoroughly as soon as possible. CAUTION – Do not place heavy objects or step on the projector.
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up.
Safety Instructions Moving the Projector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it into a suitable case to protect the projector. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case.
Compliance Federal Communications Commission Notice Multimedia Projector, Model: LV-7590 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Part Names and Functions Front q r w t Indicators Top Cover Top Cover Release Button Infrared Remote Receiver (Front) Projection Lens (not supplied) Light-Block Sheet Adjustable Feet Air Intake Vent Filter Cover !0 Lamp Cover q w e r t y u i o e u y Back i o !0 !1 Exhaust Vent !6 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
Part Names and Functions Rear Terminal q w !0 e o r i t u y q INPUT 1 TERMINAL (DIGITAL) Connect the computer output digital signal to this terminal. The HDTV (HDCP compatible) signal can also be connected (pp.24-25). ✔Note: • Use a DVI-Digital cable which fits the width of the rear terminal. w INPUT 1 TERMINAL (ANALOG) Connect the computer (or RGB scart) output signal to this terminal (pp.24-25).
Part Names and Functions Rear Terminal AA B !2 !1 !1 MONITOR OUT TERMINAL This terminal can be used to output the incoming analog RGB signal from INPUT 1-3 terminal to the other monitor (pp.24-25). !2 AUDIO MONITOR OUTPUT TERMINAL This terminal outputs the audio signal from computer or video equipment to external audio equipment (p.26). A Infrared Remote Receiver (Back) The infrared remote receiver is also located in the front (pp.12, 18).
Part Names and Functions Side Control and Indicators Side Control Indicators (on the top panel) q i w u e y o r !0 !1 t !2 q POWER button Turn the projector on or off (pp.28–29). w INPUT button Select an input source (pp.37–39). e MENU button Open or close the On-Screen Menu (p.30). r Point ed7 8 ( VOLUME + / – ) buttons – Select an item or adjust the value in the OnScreen Menu (p.30). – Pan the image in Digital zoom + mode (p.46). – Adjust the volume level (with Point 7 8 buttons) (p.33).
Part Names and Functions Remote Control Unit e w q r t y !3 !4 u !2 i o !1 !0 q STAND-BY button Turn the projector off (p.29). w Wired Remote jack Connect the remote control unit cable (not supplied) to this jack when using as a wired remote control unit. e Signal Emission indicator Light red while a signal is being sent from the remote control unit to the projector. !0 MOUSE POINTER button Move a pointer of the projector or a pointer for wireless mouse operation (p.36).
Part Names and Functions Remote Control Unit @6 !5 @5 !6 @4 @7 For PIN code and remote control unit code. @3 !7 @2 !8 @1 !9 @0 !5 D-ZOOM button Select the Digital zoom +/- mode and resize the image (p.46). @3 FREEZE button Freeze the picture on the screen (p.35). @4 !6 INPUT 1 – 3 buttons Select an input source (INPUT 1 – INPUT 3) (pp.37–39). !7 KEYSTONE button Correct keystone distortion (p.35). P-TIMER button Operate the P-timer function (p.35).
Part Names and Functions Remote Control Battery Installation 1 Open the battery compartment lid. 2 Install new batteries into the compartment. Press the lid downward and slide it. 3 Replace the compartment lid. Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. WARNING To ensure safe operation, please observe the following precautions : ● Use two (2) AAA or LR03 type alkaline batteries. ● Always replace batteries in sets.
Part Names and Functions Remote Control Unit Code The eight different remote control unit codes (Code 1–Code 8) are assigned to this projector. Switching the remote control unit codes prevents interference from other remote control units when several projectors or video equipment next to each other are operated at the same time. Change the remote control unit code for the projector first before changing that for the remote control unit. See “Remote control” in the Setting Menu on page 57.
Installation Adjustable Feet Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and adjust the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control unit or select Keystone from the menu (see pages 17, 35, 46, 50).
Installation Lens Installation and Replacement When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. 1 2 3 Shift the lens to the center position by using Lens shift function (p. 32).(Follow this procedure for replacing the lens.) Turn off the projector and unplug the AC power cord.
Installation Unplug the Lens Motor Lead connector from the socket on the Lens Attachment (follow this procedure for replacing with the Powered lens), remove the 4 screws fixing the lens attachment to detach it (follow this procedure for replacing the lens), remove the safety lens caps on the optional or standard lens, attach the Lens Attachment (supplied with the projector) to the back end of the lens by using the removed screws or supplied screws, and then reconnect the Lens Motor Lead connector to the so
Installation Focus correction Focus adjustment When the lens is attached to the projector and images are being projected onto the screen, the peripheral focus may be out of focus in some localized areas. If this happens, insert the one, of three sizes of spacers, in between the Lens Attachment and the lens to adjust the focus. Inserting the Spacer corrects the distance on the Lens Adjustment and improves the diagonal focus. The corrected distance is determined by the thickness of the used spacers.
Installation Connecting to a Computer (Digital and Analog RGB) Cables used for connection • VGA Cable (One cable is supplied.) • DVI-Digital Cable • BNC Cable ✽ USB port Monitor Output BNC cable USB cable (Supplied) USB G B R H/V V (✽ = Cables not supplied with this projector.
Installation Connecting to Video Equipment (Video, S-Video) Cables used for connection (✽ = Cables not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Scart-VGA Cable ✽ • DVI-Digital Cable ✽ ✔Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
Installation Connecting for Audio Signal Cables used for connection (✽ = Cables not supplied with this projector.) • Audio Cable ✽ Audio Output Audio Output Audio cable (stereo) AUDIO IN I/II (R) (L) External Audio Equipment Audio Input Audio cable (stereo) Audio cable (stereo) AUDIO IN I/II AUDIO OUT (stereo) ✔Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100–120 V or 200– 240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station.
Basic Operation Turning On the Projector 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector’s AC power cord into an AC outlet. The LAMP/SHUTTER indicator lights red and the POWER indicator lights green. 3 Press the POWER button on the side control or the ON button on the remote control unit. The LAMP/SHUTTER indicator dims and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.
Basic Operation Turning Off the Projector 1 Press the POWER button on the side control or the STAND-BY button on the remote control unit, and “Power off?” appears on the screen. 2 Press the POWER button on the side control or the STAND-BY button on the remote control unit again to turn off the projector. The LAMP/SHUTTER indicator lights bright and the POWER indicator turns off. After the projector is turned off, the cooling fans operate for 90 seconds.
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control unit to display the On-Screen Menu. 2 Use the Point 7 8 buttons to select a Menu icon. Use the Point ed buttons to select an item in the selected menu. 3 Press the OK button to show the item data.
Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 74-76. For Computer Source q w e r t y u i o !0 q Guide Window y Image Adjust Menu Show the selected of the On-Screen Menu. Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto picture control/Advanced color/Color temp./White balance (R/G/B)/Offset (R/G/B)/ Sharpness/ Gamma/Reset/Store/Quit] (pp.51–53).
Basic Operation Operating with Projector Control Lens Operation The following lens operation can be made with the Lens button on the side control. Side Control Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen. LENS button POINT buttons SHUTTER button ZOOM ➜ FOCUS ➜ Lens shift ➜ ••••• Zoom Adjustment ZOOM Display “ZOOM” on the screen. Use the Point ed buttons to zoom in and out the image. Focus Adjustment Display “FOCUS” on the screen.
Basic Operation Sound Adjustment Direct Operation Side Control Volume Press the VOLUME+/– buttons on the side control or on the remote control unit to adjust the volume of Audio Output. The volume dialog box appears on the screen for a few seconds. VOLUME +/– buttons Mute Press the MUTE button on the remote control unit to temporarily turn off the AUDIO OUT. To turn the AUDIO OUT back on, press the MUTE button again or press the VOLUME +/– buttons.
Basic Operation Operating with Remote Control Unit Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control unit to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 41 for details.
Basic Operation Remote Control Unit FILTER button Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter. ✔Note: • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. FREEZE button MOUSE POINTER button Press the FREEZE button on the remote control unit to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button.
Basic Operation Pointer Function You can move the Pointer of the projector with the remote control unit to emphasize a part of the projected image. 1 Press the POINTER button to activate the Pointer function. 2 Use the MOUSE POINTER button to move the Pointer. 3 To cancel the Pointer function, press the POINTER button again or press any other button. MOUSE POINTER button POINTER button Pointer ✔Note: • You can choose the pattern of Pointer (Cross/Arrow/Dot) in the Setting Menu (p.
Input Selection Input Side Control Remote Control Unit Side Control/Remote control unit button operation INPUT button INPUT button INPUT button Input 1 Input 2 Input 3 Side Control/Remote Control Unit Operation Press the INPUT button on the side control or the remote control unit. It switches to INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT button.
Input Selection Computer Input Source Selection Menu Operation WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to the desired input and then press the OK button. The Source Select Menu appears. 3 Use the Point ed buttons to select the desired source and then press the OK button.
Input Selection Video Input Source Selection Menu Operation WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) When connecting to video equipment, select the type of Video source in the Source Select Menu. INPUT MENU Input Menu icon RGB (Scart) Move the pointer (red arrow) to Input 1 and press the OK button. When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).
Computer Input Computer System Selection Automatic Multi-Scan System This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA or WUXGA (refer to “Compatible Computer Specifications” on pages 80–81). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation Remote Control Unit The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control unit. AUTO PC button Menu Operation Auto PC adj. 1 Press the MENU button to display the On-Screen Menu.
Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
Computer Input Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data. To clear the adjusted data, select Mode free and then press the OK button. Move the red arrow pointer to the Mode that you want to clear and then press the OK button. Store To store the adjusted data, select Store and then press the OK button.
Image Level Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the OK button. Standard Normal picture level preset on the projector. High contrast Picture level with improved halftone for graphics. Custom 1–10 User preset picture adjustment in the Image Adjust Menu. (p.
Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Aspect Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the OK button. ASPECT MENU Aspect Menu icon Move the red frame pointer to the desired function and press the OK button.
Computer Input Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store ����� Keep the keystone correction even when the AC power cord is unplugged. Reset ����� Release the keystone correction when the AC power cord is unplugged. ASPECT MENU Move the red frame pointer to the desired function and press the OK button. To correct keystone distortion, press the OK button.
Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to the desired system and then press the OK button. INPUT 3 TERMINAL (VIDEO) or INPUT 3 TERMINAL (S-VIDEO) Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.
Video Input Image Level Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the OK button. Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. Custom 1–10 User preset picture adjustment in the Image Adjust Menu. (p.
Video Input Screen Size Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Aspect Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the OK button. ASPECT MENU Aspect Menu icon Move the red frame pointer to the desired function and press the OK button. Normal Provide the image at the normal video aspect ratio of 4:3.
Video Input Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store ����� Keep the keystone correction even when the AC power cord is unplugged. Reset ����� Release the keystone correction when the AC power cord is unplugged. ASPECT MENU Move the red frame pointer to a function and press the OK button. To correct keystone distortion, press the OK button. The Keystone dialog box appears.
Picture Image Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the OK button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. IMAGE ADJUST MENU Image Adjust Menu icon Move the red frame pointer to the desired item and then press OK button.
Picture Image COLOR SELECTION MODE (continued) COLOR M. COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control unit, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored.
Picture Image White balance (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone of the black level of an image; press the Point 8 button to deepen red/green/ blue tone of the black level of an image (from 0 to 63). Press the OK button at this icon to display other items.
Setting Setting This projector has a Setting menu that allows you to set up other various functions. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the OK button. The Setting dialog box appears. SETTING MENU (Language) Setting Menu icon Set the red frame pointer to the item and press the OK button.
Setting Background The selected background screen will be displayed when no input signal is detected. Blue ������� Blue colored background. User ������� The image you captured. Black ����� Black colored background. ✔Note: • “User” cannot be selected when the image is not captured. Logo This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.
Setting Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Logo PIN Code Lock Off ��������� The screen logo can be changed freely from the Logo Menu. On ��������� The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the OK button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.
Setting Lamp mode This function allows you to change the brightness of the screen. Auto ����������� Brightness according to the input signal. Normal ������� Normal brightness. Eco 1 ��������� Lower brightness and Fan control set to Normal. Lower brightness reduces the lamp power consumption and extends the lamp life. Eco 2 ��������� Lower brightness and Fan control set to Max. Lower brightness reduces the lamp power consumption and extends the lamp life.
Setting RC sensor Select a location of the infrared remote receiver of the remote control unit. See “Remote Control Receivers and Operating Range” on page 18 for details. Both ��������� Activate both the front and back receiver. Front �������� Activate only the front receiver. Back ��������� Activate only the back receiver.
Setting Security Security Key lock This function locks the side control and remote control unit buttons to prevent operation by unauthorized persons. ��������� Unlocked. ��������� Lock the side control buttons. To unlock, use the remote control unit. ��������� Lock the remote control unit buttons. To unlock, use the side control. If the side control accidentally becomes locked and you do not have the remote control unit nearby and unable to operate the projector, contact the service station.
Setting Enter a PIN code Use the Point ed buttons on the side control or Number buttons on the remote control unit to enter a number. When using side control Use the Point ed buttons on the side control to select a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set.
Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Protection Prohibit the shutter operation from the remote control unit and the projector's side control. Remote control Selecting "On" prohibits the shutter operation from the remote control unit. Projector ������� Selecting "On" prohibits the shutter operation from the side control unit.
Setting Filter counter Filter counter This function is used to set a frequency for the filter replacement. Use the Point ed buttons to move the red frame pointer to Filter counter and then press the OK button. A dialog box appears showing the Used time option and the Scrolls remaining option. Used Time ������������ Show the total accumulated time of the filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon (Fig.
Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily.
Maintenance and Care Replacing the Filter Cartridge 1 Turn off the projector, and unplug the AC power cord from the AC outlet. 2 First, clean up the dust on the projector and around the air vents. 3 Press s on the filter cover to release the latch and open the filter cover. 4 Pull out the filter cartridge. When taking out the filter cartridge, put your finger on the filter cartridge’s tab and then pull. 5 Put the new one back into the position and close the filter cover.
Maintenance and Care Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the red frame pointer to Filter counter and then press the OK button. A dialog box appears showing the Used time option and the Scrolls remaining option. Use the Point ed buttons to select Used time.
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Filter cover Lamp cover Top Panel Lamp replacement icon Screw LAMP REPLACE indicator ✔Note: • The Lamp replacement icon will not appear when the Display function is set to “Off” (p.
Maintenance and Care Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon 2 Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the OK button.
Maintenance and Care CAUTION LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.
Maintenance and Care Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning.
Maintenance and Care Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING TEMP. indicator is blinking red. Top Panel When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector.
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 24–26. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected. 3. Make sure that all power is switched on. 4. If the projector still does not produce an image, restart your computer. 5.
Appendix – Filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 64 -65) appears on the screen The image is out of focus. – Adjust the focus of the projector. – Check Projection Lens to see if it needs cleaning. ✔Note: Moving the projector from a cool temperature location to a warm temperature location may result in moisture condensation on Projection Lens. In such cases, leave the projector OFF and wait until condensation evaporates.
Appendix The power is turned off automatically. – Power management function runs by initial setting. Check “SETTING” section on page 58. – When the filter cartridge replacement icon keeps appearing on the screen at turning on the projector for some time and no action is taken to replace the filter cartridge, the projector will be automatically shut down in 3 minutes after turning on to protect the projector. (See pages 63-65, 79) – Do not cover the ventilation slots on the projector.
Appendix Menu Tree Computer Input/Video Input Input Input 1 Go to System (1) RGB (PC analog) RGB (Scart) RGB (PC digital) Go to System (1) RGB (AV HDCP) Input 2 Input 3 Video Go to System (2) Y, Pb/Cb,Pr/Cr Go to System (3) RGB Go to System (1) Video Go to System (2) Y, Pb/Cb,Pr/Cr Go to System (3) S-video Go to System (2) Network ✽ ✽ Network will be displayed only when an optional Network Imager is attached. Information Information Image Adjust Input H-sync freq. V-sync freq.
Appendix Computer Input System (1) Image Select Mode 1 Standard Mode 2 High contrast SVGA 1 Custom 1 SVGA 2 SVGA 3 Custom 10 ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Aspect Auto PC adj. Fine sync.
Appendix Computer Input/Video Input Setting Language 12 languages provided. Quit Menu Position Simple Menu On/Off Quit Display On/Countdown Off/Off Background Blue/User/Black Logo Logo select User/Default/Off Capture Yes/No Logo PIN code lock On Quit Off Lamp mode Auto/Normal/Eco1/Eco2 Filter control Yes/No Fan control Normal/Max Remote control Simple mode On/Off RC code Code 1 Quit RC sensor Both/Front/Back Power management Off Ready Logo PIN code change Code 8 1–30 Min.
Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators POWER green LAMP LAMP/ WARNING WARNING SHUTTER TEMP. FILTER REPLACE red/blue red orange orange Projector Condition The projector is off. (The AC power cord is unplugged.) ❖ ✽ ✽ The projector is in stand-by mode. Press the POWER button to turn on the projector. ❖ ✽ ✽ The projector is operating normally.
Appendix The projector is detecting abnormal condition. Indicators POWER green LAMP LAMP/ WARNING WARNING SHUTTER TEMP. FILTER REPLACE red/blue red orange orange ❖ ✽ ✽ ❖ ✽ The temperature inside the projector is elevated close to the abnormally high level. ✽ The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights green and the projector can be turned on.
Appendix The projector is detecting abnormal condition. Indicators POWER green Projector Condition LAMP LAMP/ WARNING WARNING SHUTTER TEMP. FILTER REPLACE red/blue red orange orange ✽ ✽ Fig.2 Filter replacement icon Fig.3 If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible.
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 180 MHz of Dot Clock.
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 9 D-WXGA 10 RESOLUTION 640x480 720x480 720x575 800x600 1024x768 1366x768 1360x768 1376x768 1360x768 1366x768 1280x768 1280x768 1280x800 1280x800 H-Freq. (kHz) 31.470 31.470 31.250 37.879 43.363 48.360 47.700 48.360 56.160 46.500 47.776 60.289 49.600 41.200 V-Freq.(Hz) 59.940 59.880 50.000 60.
Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Multi-media Projector 14.56” x 7.36” x 17.32” (370.0 mm x 187.0 mm x 439.9 mm) 25.1 lbs (11.4 kg) 0˚ to 6.5˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels 1.
Appendix Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Model No. Ultra Wide Angle Lens Type No. : LV-IL01 Wide Angle Zoom Lens Type No. : LV-IL02 Long Focus Zoom Lens Type No. : LV-IL03 Ultra Long Focus Zoom Lens Type No. : LV-IL04 Standard Zoom Lens Type No. : LV-IL05 Ceiling Attachment Type No. : LV-CL13 High Ceiling Attachment Type No.
Appendix Configurations of Terminals INPUT 1 (ANALOG)/ MONITOR OUT (Mini D-sub 15 pin) Input 5 15 10 4 14 9 3 13 2 8 1 7 12 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input No Connect Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 +5V Power Ground (Vert.sync.) Ground DDC Data Horiz. sync. Input (Composite H/V sync.) Vert. sync. Input DDC Clock Output 1 2 3 4 5 6 7 8 Red Output Green Output Blue Output No Connect Ground (Horiz.sync.
Appendix While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code.
Appendix Dimensions Unit: inch (mm) 4.33 (110) 4.33 (110) 5.75 (146) 13.58 (345) 17.32 (439.9) 2.05 (52) 7.36 (187) 3.94 (100) 6.5º MAX 14.57 (370) 5.20 (132) 4.13 (105) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.
Appendix Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.
Appendix Functional Execution Command Format The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below. -The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR' -When the projector can not decode the command, it returns with format below.
Appendix Status Read Command Format The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom CANON EUROPA N.V.
