User's Manual Network Set-up and Operation for LV-8235

ENGLISH

E-mail setting

✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into

Standby in proper user operation" signifies that the projector is turned on by using the web browser

and then it is turned into standby with POWER button on the top control or the remote control.

✐ Up to 99,999 hours can be set for use time.

Error message for sending alert mail

When the projector has an abnormality, an

alert message will be sent to the registered

E-mail address.

If the SMTP server is missing or the authen-

tication is not completed because of input

error in E-mail address setting or SMTP

authentication setting when sending alert

e-mail, the error message will be displayed.

Please check the respective settings.

Option

Option selection for sending alert mail

Click Option sub menu tab. Check the con-

dition items under which alert mail will be

sent and click Set button.

Please refer to item "Examples :Type and

contents of alert mail" described on the next

page.

4 Setting POP server

When "POP before SMTP" is selected at

"Auth" of "SMTP Authentication setting",

enter "POP server*

" and "POP server port"

and click Set button.

*2 The POP server is a server for receiving e-mail.

Please contact your network administrator to have this POP server address.

Error information

Error message for missing SMTP server

Error message for authentication problem