Operation Manual

⑤
12
Part Names and Functions
①Top Controls and Indicators
②Infrared Remote Receiver
③Lamp Cover (Lamp and Air Filter)
④Adjustable feet
⑤Speaker
⑥Exhaust vent
⑦Air Intake vent
⑧Projection Window

Note:
Do not touch the projection window, otherwise,
the window may be soiled and the image can be
smudgy.
⑨Focus Lever
⑩LAN Connection Terminal
⑪ Terminals and Connectors
⑫Power Cord Connector
⑬Security Bar

Note:
⑩LAN Connection Terminal is for the Network
function. Refer to the user's manual of “Network
Set-up and Operation”.
Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*
Kensington is a registered trademark of ACCO
Brands Corporation.
Front
Rear
CAUTION
The infrared remote receiver sticks out of the
cabinet surface. If the infrared remote receiver
is put on the wall or floor directly, the infrared
remote receiver may damage.
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
②
③
④
④
⑥
⑥
⑪
⑫
⑧
⑨
⑬
⑦

⑩
WARNING
The projection window becomes very hot during
use. Do not put your hand or objects on the
projection window. High temperature from light
beam may damage light-blocking objects and
result in fire hazard.
①