Operation Manual
57
Enter a Logo PIN code
Use the Point buttons to enter a number. Press the
Point button to fix the number and move the red frame
pointer to the next box. The number changes to . If
you fixed an incorrect number, use the Point button to
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set and press the OK button.
If you entered an incorrect Logo PIN code, Logo PIN
code and the number () will turn red for a
moment. Enter the correct Logo PIN code all over again.
Logo PIN code can be changed to your desired four-digit
number. Press the OK button to select Logo PIN code
change. Current logo PIN code dialog box appears, use
the Point buttons to enter the correct code. The New
Logo PIN code input dialog box appears. Set a new Logo
PIN code, confirmation box appears, choose Yes to set
the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
Use the Point buttons to switch On or Off, and then
press the OK button to make a choice.
Change the Logo PIN code lock setting
Enter a Logo PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE AS A REMINDER.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING CAN
NO LONGER BE CHANGED.
Logo PIN code change
Setting
Logo PIN code change
Note:
If you forget your Logo PIN code and unable to change it,
the Logo PIN code can be reset to the factory default
setting (4321) according to the following procedures.
When you reset the Logo PIN code, the PIN code and Key
lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet again.
Keep holding down the OK button until the POWER
indicator lights. The Logo PIN code returns to the
factory default setting while the Logo PIN code lock
state will remain the same as the previous set state.