ENGLISH MULTIMEDIA PROJECTOR LV-WX320/LV-X320/LV-WX310ST/LV-X310ST User’s Manual
Table of Contents Table of Contents ........................... 2 Safety instructions ......................... 3 Contents of package ..................... 13 Projector exterior view ................ 14 Controls and functions ................ 15 Positioning your projector .......... 19 Choosing a location .........................19 Obtaining a preferred projected image size ..................................................20 Connection ....................................
Before installing and operating the projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazards, or other accidents.
Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam. • Install the projector in a proper position. Otherwise it may result in a fire hazard.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. For wall or shelf mounting, use a tool such as a mounting kit to secure the projector. An appliance and cart combination should be moved with care.
AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it. AC Power Cord for the United States and Canada: The AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). The AC Power Cord has a grounding-type AC line plug. This is a safety feature to ensure the plug fits into the power outlet.
ENGLISH Federal Communication Commission Notice Multimedia Projector, Model: LV-WX320/LV-X320/LV-WX310ST/LV-X310ST This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Precautions for Use As this section contains important safety-related information, be sure to read the following carefully beforehand in order to use your projector correctly and safely. Warning If the following situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock.
ENGLISH Warning Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so could result in a fire, electric shock or personal injury. • Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V). • Do not pull the power cord and be sure to hold the power plug or connector when removing. The cord could be damaged as a result.
Caution Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of time, be sure to remove the power plug from the power outlet to ensure safety. Failure to do so could cause a fire. • The temperature of the cabinet around and above the exhaust vents can become hot during projector operation. Touching these areas during operation could cause burns to the hands. Do not touch these areas. Doing so may cause burns.
ENGLISH Caution When handling the lamp, pay attention to the following points. • Be sure not to handle the lamp immediately after it has been used. Be sure to switch off the power and wait for approximately 45 minutes for the lamp and the projector to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector.
For Safe Use Pay attention to the following points when carrying or transporting the projector. • This projector is a precision instrument. Do not knock it over or subject it to impacts. Doing so may cause a malfunction. • Do not reuse any packaging or shock-absorbent materials that were supplied with the projector at the time of purchase for transporting or shipping the projector. Protection of the projector cannot be guaranteed if used packaging or shock-absorbent materials are reused.
Contents of package LV-WX310ST/LV-X310ST ENGLISH LV-WX320/LV-X320 (US) (EU) Projector (China) Power cord 1.8 m (70.8") CD & QSG Important Information Warranty card Computer cable 1.8 m (70.8") (5K.1VC09.
Projector exterior view 1. Front/upper side LV-WX320/LV-X320 1 5 2 3 8 4 6 7 2. 3. 4. 5. 6. 7. 8. 9. External control panel (See "Projector" on page 15 for details.) Lamp cover Vent (heated air exhaust) Quick-release button Focus ring and Zoom ring (LV-WX320/LV-X320) Focus ring (LV-WX310ST/LV-X310ST) Front IR remote sensor Projection lens Vent (air intake) Lens cap 9 LV-WX310ST/LV-X310ST 1 5 2 3 8 4 6 7 9 Rear/lower side 10 11 12 18 19 13 14 15 16 17 21 22 20 14 10. 11. 12. 13. 14.
Projector 8. LV-WX320/LV-X320 1 8 2 3 4 5 6 7 9. 9 10 11 12 13 10. 11 LV-WX310ST/LV-X310ST 11. 1 8 3 4 5 6 7 12. 9 10 11 12 13 11 1. 2. 3. 4. 5. 6. 7. Focus ring 13. Adjusts the focus of the projected image. See "Finetuning the image size and clarity" on page 35 for details. Zoom ring (LV-WX320/LV-X320) Adjusts the size of the image. See "Fine-tuning the image size and clarity" on page 35 for details. POWER indicator light Lights up or flashes when the projector is under operation.
Remote control: LV-RC08 9. 2 8 9 10 3 11 4 5 12 13 9 6 14 1 10. 11. 7 1. 2. 3. 4. 5. 6. 7. 8. 16 POWER (ON/STANDBY) 12. Toggles the projector between standby mode and on. See "Starting up the projector" on page 30 and "Shutting down the projector" on page 44 for 13. details. INPUT Displays the source selection bar. See "Switching input signal" on page 34 for details. Left 14. Selects the desired menu items and makes adjustments. See "Using the menus" on page 31 for details.
ENGLISH Using the remote control for the first time Pull the tab before using the remote control. Remote control effective range Infra-Red (IR) remote control sensor is located on the front of the projector. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam.
Third party software This product includes third party software modules. • uIP (micro IP) version 0.9 Please see the below licence text concerning the licence condition. Copyright © 2001-2003, Adam Dunkels. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Positioning your projector ENGLISH Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of the possible installation locations: 1.
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of LV-X320/LV-X310ST. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width.
1. 2. 3. 4. Select your image size. Refer to the table and find the closest match to your image size in the left columns labeled "Image size". Using this value, look across this row to the right to find the corresponding average distance from screen value in the column labeled "Distance from the screen: L". This is the projection distance. On that same row, look across to the right column and make note of the "Hd" value.
Layout of the projector (LV-WX320/LV-X320) Image size varies depending on the distance between the screen and the projector. Front projection W B H A Hd A=B L L: Between the screen and the front edge of the projector H: Height of the projected image LV-X320 (4:3) Diagonal Size inch m Image size Width: W inch cm Height: H inch cm 60 70 80 90 100 120 150 180 48 56 64 72 80 96 120 144 36 42 48 54 60 72 90 108 1.5 1.8 2.0 2.3 2.5 3.1 3.8 4.
ENGLISH Layout of the projector (LV-WX310ST/LV-X310ST) Image size varies depending on the distance between the screen and the projector. Front projection W B H A Hd A=B L L: Between the screen and the front edge of the projector H: Height of the projected image LV-X310ST (4:3) Diagonal Size inch m 60 70 80 90 100 120 1.5 1.8 2.0 2.3 2.5 3.
Connection When connecting a signal source to the projector, be sure to: 1. 2. 3. Turn all equipment off before making any connections. Use the correct signal cables for each source. Ensure the cables are firmly inserted. • See the user’s manual of each device for details about its connections. • Contact your dealer for details about its connections. • In the connections shown below, some cables may not be included with the projector. They are commercially available from electronics stores.
ENGLISH Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • HDMI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality.
Connecting an HDMI device You should use an HDMI cable when making connection between the projector and HDMI devices. To connect the projector to an HDMI device: 1. Take an HDMI cable and connect one end to the HDMI output terminal of the video device. 2. Connect the other end of the cable to the HDMI/MHL input terminal on the projector.
Images may not be displayed correctly depending on the connected device type and the settings. • Operation may differ or the intended operation may not be performed when using the controls on the projector and the remote controller, depending on the connected device. • When using a MHL-HDMI conversion adapter (available on the market), the connected device cannot be operated using the controls on the projector and the remote controller.
Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output terminal available: • • If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device: 1. Take an S-Video cable and connect one end to the S-Video output terminal of the Video source device. 2.
Examine your Video source device to determine if it has a set of unused composite Video output sockets available: • • If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a composite Video source device: 1. Take a Video cable and connect one end to the composite Video output terminal of the Video source device. 2. Connect the other end of the Video cable to the VIDEO terminal on the projector. 3.
Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied. • Ask your installation specialist to provide an Earth leakage breaker. When you do not use the projector, be sure to shut down the main power by the breaker. • Please use the original accessories (e.g.
ENGLISH Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. Main menu icon DISPLAY main menu Off Screen Color Aspect Keystone Position Phase H. Total Dots D.Zoom 3D 3D Sync Highlight Sub-menu Current input signal Auto Status 16 0 Normal MENU Exit Analog RGB Go to the previous page or to exit. Below is an example about how to set the OSD language. 1.
Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 31. You will be inconvenienced if you activate the power-on lock functionality and subsequently forget the password.
4. Enter the old password. • If the password is correct, another message 'INPUT NEW PASSWORD' is displayed. • If the password is incorrect, the password error message is displayed lasting for three seconds, and the message 'INPUT CURRENT PASSWORD' is displayed for your retry. You can press MENU to cancel the change or try another password. Enter a new password. The digits being input will be displayed as asterisks on-screen.
Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. Be sure the Auto Search function in the INPUT menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. 2. 34 Press INPUT on the projector or remote control. A source selection bar is displayed.
Adjusting the projected image ENGLISH Adjusting the projection angle The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These adjusters change the image height and projection angle. To adjust the projector: 1. Press the quick-release button and lift the front of the projector. Once the image is positioned where you want it, release the quick-release button to lock the foot in position. 2. Screw the rear adjuster foot to fine tune the horizontal angle.
LV-WX310ST/LV-X310ST For adjusting the size to your desired, you need to move the product for appropriate projection distance. Follow the procedure below for the installation and adjustment. C The focus will be off after adjusting the projection distance, so be sure to readjust the focus. If the image is very blurry, adjusting the focus to make the image sharp will change the size of the projected image. Adjust the projection distance and focus repeatedly in alternation as necessary. 1. 2. 3.
If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • 1. 2. 3. 4. • 1. 2. 3. 4. 5. 6. 7. Using the remote control Press D.ZOOM +/- to display the Zoom bar. Press D.ZOOM + to magnify the center of the picture. Press the key repeatedly until the picture size is suitable for your need. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture.
About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. LV-X320/ LV-WX320/ LV-X310ST 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width or its vertical height. This is suitable when you want to make most use of the screen without altering the image's aspect ratio. 4:3 picture 16:9 picture 16:10 picture 2.
Useful functions available during a presentation ENGLISH Selecting a image mode The projector is preset with several predefined image modes so that you can choose one to suit your operating environment and input signal picture type. To select a operation mode that suits your need, you can follow one of the following steps. • • Press OK/IMAGE on the remote control or projector repeatedly until your desired mode is selected. Go to the PICTURE > Image Mode menu and press / to select a desired mode.
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic. Adjusting Tint Highlight Tint in the PICTURE menu and adjust the values by pressing control. / on the projector or remote The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes. Adjusting Sharpness Highlight Sharpness in the PICTURE menu and adjust the values by pressing remote control.
1. 2. 3. 4. 5. 6. 7. 8. 9. Go to the PICTURE menu and highlight 6-axis Color Adjust. Press OK/IMAGE and the 6-axis Color Adjust page is displayed. Highlight Select Color and press / to select a color from among Red, Green, Blue, Cyan, Magenta, or Yellow. Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors. Please refer to the illustration to the right for how the colors relate to each other.
Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. 2. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press OK/IMAGE to display the Presentation Timer page. Press to highlight Preset Time and decide the timer period by pressing / .
ENGLISH Hiding the image In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden.
Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input. See "Connection" on page 24 for how the audio input is connected. Muting the sound To temporarily turn off the sound, press MUTE on the remote control, or: 1. 2. 3. Press MENU and then press / until the SYSTEM SETUP: Advanced menu is highlighted. Press to highlight Audio Settings and press OK/IMAGE.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press I POWER again to start the projector after the fans stop and the POWER indicator light turns orange. I Direct power off 1. 2. 3. 4. The AC power cord can be pulled out during the projector is on. To protect the lamp, wait about 10 minutes before re-starting the projector.
Watching 3D content This projector supports 3D content display using the DLP Link system. This projector supports 3D image signals in Frame Sequential/Frame Packing/Top-Bottom/Side-By-Side format. You need the following items to project and watch 3D content. • • • 3D content capable device. For example, a computer with graphics board and software capable of outputting 3D images 3D content DLP-Link active electronic shutter 3D glasses (144Hz Compatible) Not all 3D glasses are guaranteed to work correctly.
Children viewing 3D content should always be accompanied by an adult. Children may not tell you if they are feeling unwell when viewing 3D content, so always be sure to check with the child. The minimum recommended age for viewing 3D content is six years old. • Make sure you are at an appropriate distance from the front of the screen when viewing 3D content.
Supervising and controlling by computer With a proper LAN cable connection and LAN Control settings, you can operate the projector from a computer using a web browser or PJLink™ application when the computer and the projector are connected to the same local area network. This projector supports Crestron® software and PJLink™. An example of connecting the projector to computer. External hub Computer LAN cable (option) (100BASE-TX or 10BASE-T should be supported.
Once you have the correct IP address for the projector and the projector is on or in standby state, you can use any computer that is on the same local area network to control the projector. When using this function, Adobe Flash Player has to be installed in your computer. Please download Adobe Flash Player from the website of Adobe Systems Incorporated. 1. Enter the IP address of the projector in the address bar of your browser and press enter. (for example, http://192.168.0.146) 2.
iv. Once set, access to the remote network operation page on this projector has been passwordprotected. To enable this function, check the box in front of "Enable" and type in your desired password in the New Password column and confirm the new password by re-entering the new password at the Confirm column. To disable password protection, uncheck the box. v. Once set, access to the Tools page has been password-protected. Refer to step iv for how to use the password function. vi.
ENGLISH When the projector is in normal conditions or in any abnormal conditions other than the ones mentioned below, the Error Status column will be "0:No Error". Error Status Description 3: Lamp fail The lamp fails to ignite or turns off during operation. 3: Over Temp The projector temperature is too high or cannot be detected. 3: Fan Lock The fan rotation speed cannot be set or detected. 3: Over Lamp Usage Time The lamp is still in use after the lamp warning messages display. (3 = Error) 5.
PJLink™ supported commands The table below shows commands to control the projector using the PJLink™ protocol.
During standby • During input source switching • During command processing • During AUTO PC execution • Before the splash screen disappears after the power is turned on. • Use 1 computer to control/monitor 1 projector. • For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use.
Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Screen Color Off*/Light Yellow/Pink/Light Green/Blue/Blackboard Aspect Auto*/Real/16:10 (LV-WX320/LVWX310ST)/4:3/16:9 Keystone Position 1. DISPLAY Phase H. Total Dots D.
Sub-menu Presentation Timer ENGLISH Main menu Options Preset Time 1~240 minutes Timer Display Always*/1 min/2 min/3 min/Never Position Top-Left*/Bottom-Left/Top-Right/ Bottom-Right Counting Direction Count Down*/Count Up Sound Reminder On*/Off On/Off* 4.
Main menu Sub-menu Security Settings Closed Caption Settings 5. SYSTEM SETUP: Advanced Options Change Password Power On Lock On/Off* Closed Caption On/Off* Caption Channel CC1*/CC2/CC3/CC4 Standby LAN Off*/On PJLink Certification Off*/On Change PJLink Password DHCP LAN Settings On*/Off Projector IP Address Subnet Mask Default Gateway DNS Server Apply Reset All Settings Input Image Mode 6.
1. DISPLAY menu FUNCTION DESCRIPTION Screen Color Corrects the projected picture’s color when the projection surface is not white. See "Using Screen Color" on page 41 for details. Aspect There are several options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 37 for details. Keystone Corrects any keystoning of the image. See "Correcting keystone" on page 36 for details. Position Displays the position adjustment page.
2. PICTURE menu 3. INPUT menu 58 FUNCTION DESCRIPTION Image Mode Pre-defined image modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a image mode" on page 39 for details. Brightness Adjusts the brightness of the image. See "Adjusting Brightness" on page 39 for details. Contrast Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 39 for details.
4. SYSTEM SETUP: Basic menu ENGLISH FUNCTION DESCRIPTION Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 42 for details. Language Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 31 for details. Image flip H/V See "Choosing a location" on page 19 for details.
FUNCTION DESCRIPTION Closed Caption Settings Activates the function by selecting On when the selected input signal carries closed captions. • 5. SYSTEM SETUP: Advanced menu Closed Caption Settings Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV listings). When the projector displays OSD or any dialog, captions are not displayed at the same time.
Care of the projector Your projector needs maintenance from time to time, depending on the environmental circumstances, and should be done by authorized service technicians only. Contact your dealer for instructions. The only thing you can do yourselves on a regular basis is to keep the lens and cabinet clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface.
Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Total Lamp Hour = (hours used in Normal mode) + 2/3*(hours used in Economic mode) See "Setting Lamp Mode as Economic" below for more information on Economic mode. To obtain the lamp hour information: 1.
ENGLISH Timing of replacing the lamp When the lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. The LAMP indicator light and TEMPerature indicator light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes.
Replacing the lamp • Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. • To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. • To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.
Remove the lamp cover from the projector. 1 , ENGLISH 3. 2 2 Pull up the lamp cover, pushing up the allow parts of the front panel. • Do not turn the power on with the lamp cover removed. • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries. 4. Confirm a position of the lamp protection film to put a new film on the same position later. Remove and dispose of the lamp protection film. 3 5. Loosen the screw that secures the lamp.
10. Put the lamp protection film supplied with the new lamp on the lamp compartment. 11. As shown in the figure, replace the lamp cover on the projector. 2 1 12. Tighten the screws that secure the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 13. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 14. After the startup logo, open the On-Screen Display (OSD) menu.
Indicators POWER Status & Description TEMP ENGLISH Light LAMP Power events Orange Off Off Stand-by mode. Green Flashing Off Off Powering up. Green Off Off Normal operation. Orange Flashing Off Off Normal power-down cooling. Red Off Off FW Download. Green Off Red Color Wheel start fail. Red Flashing Off Off Scaler shutdown fail (data abort). Off Off Red Lamp error in normal operation.
Troubleshooting The projector does not turn on Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make sure that it is switched on. Attempting to turn the projector on again during the cooling process. Wait until the cooling down process has completed. No picture Cause Remedy The video source is not turned on or connected correctly.
Specifications ENGLISH Projector specifications All specifications are subject to change without notice. Model name LV-WX320 LV-X320 LV-WX310ST 1-CHIP DLP™ Optical system Time division color extraction, sequential display Projection lens Display device Display system Type DMD Size / Aspect ratio 0.65" x 1 /16:10 0.55" x 1 / 4:3 LV-X310ST 0.65" x 1 / 16:10 0.
Model name LV-WX320 HDMI/MHL terminal LV-X320 LV-WX310ST LV-X310ST Digital PC, digital video, MHL input Input terminal ANALOG PC / Analog PC, Component (mini D-sub 15-pin) COMPONENT terminal Mini-DIN4 S video input RCA terminal Video input LAN terminal Network connection (100BASE-TX / 10BASE-T) USB Port Service port CONTROL terminal RS-232C (D-sub 9-pin) AUDIO IN terminal Audio signal (3.5 stereo mini jack) Input signal AUDIO OUT terminal Audio signal (3.
ENGLISH Dimensions LV-WX320/LV-X320 282 mm (W) x 114.5 mm (H) x 232 mm (D) / 11.1 in (W) x 4.5 in (H) x 9.1 in (D) (including the protrusion) 232 mm (9.1”) 282 mm (11.1”) 114.5 mm (4.5”) 91 mm (3.6”) Tolerance:±2 mm (0.08 in) LV-WX310ST/LV-X310ST 282 mm (W) x 117.9 mm (H) x 267.5 mm (D) / 11.1 in (W) x 4.6 in (H) x 10.5 in (D) (including the protrusion) 267.5 mm (10.5”) 282 mm (11.1”) 117.9 mm (4.6”) 91 mm (3.6”) Tolerance:±2 mm (0.
Timing chart Supported timing for PC input Resolution Mode Refresh Rate (Hz) Horizontal Frequency (kHz) Clock (MHz) 720 x 400 720 x 400_70 70.087 31.469 28.3221 VGA_60* 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500 31.500 640 x 480 800 x 600 1024 x 768 VGA_85 85.008 43.269 36.000 SVGA_60* 60.317 37.879 40.000 SVGA_72 72.188 48.077 50.000 SVGA_75 75.000 46.875 49.500 SVGA_85 85.061 53.674 56.250 SVGA_120** (Reduce Blanking) 119.854 77.
ENGLISH Supported timing for HDMI (HDCP) input Supported PC timings Resolution Mode Vertical Frequency (Hz) Horizontal Frequency (kHz) Clock (MHz) 720 x 400 720 x 400_70 70.087 31.469 28.3221 640 x 480 800 x 600 1024 x 768 1152 x 864 VGA_60* 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500 31.500 VGA_85 85.008 43.269 36.000 SVGA_60* 60.317 37.879 40.000 SVGA_72 72.188 48.077 50.000 SVGA_75 75.000 46.875 49.500 SVGA_85 85.061 53.674 56.
Supported MHL timings Timing Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Dot Clock Frequency (MHz) 480i 720(1440) x 480 15.73 59.94 27 480p 720 x 480 31.47 59.94 27 576i 720(1440) x 576 15.63 50 27 576p 720 x 576 31.25 50 27 720/50p 1280 x 720 37.5 50 74.25 720/60p 1280 x 720 45 60 74.25 1080/24P 1920 x 1080 27 24 74.25 1080/25P 1920 x 1080 28.13 25 74.25 1080/30P 1920 x 1080 33.75 30 74.25 1080/50i 1920 x 1080 28.13 50 74.
Timing Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Dot Clock Frequency (MHz) 480i 720 x 480 15.73 59.94 13.5 480p 720 x 480 31.47 59.94 27 576i 720 x 576 15.63 50 13.5 576p 720 x 576 31.25 50 27 720/50p 1280 x 720 37.5 50 74.25 720/60p 1280 x 720 45 60 74.25 1080/50i 1920 x 1080 28.13 50 74.25 1080/60i 1920 x 1080 33.75 60 74.25 1080/50P 1920 x 1080 56.25 50 148.5 1080/60P 1920 x 1080 67.5 60 148.
Control Commands You can control this projector by sending commands via CONTROL port or LAN port.
Image Mode Aspect Image Flip H/V Auto Search Presentation IMAGE=PRESENTATION W Standard IMAGE=STANDARD W sRGB IMAGE=SRGB W Movie IMAGE=MOVIE W User1 IMAGE=USER_1 W User2 IMAGE=USER_2 R Image Mode GET=IMAGE W Aspect 4:3 ASPECT=4:3 W Aspect 16:9 ASPECT=16:9 W Aspect Auto ASPECT=AUTO W Aspect Real ASPECT=TRUE W Aspect 16:10 ASPECT=16:10 R Aspect Status GET=ASPECT W Front Table IMAGEFLIP=NONE W Rear Table IMAG
Operation High Altitude W Blank On BLANK=ON W Blank Off BLANK=OFF R Blank Status GET=BLANK W Freeze On FREEZE=ON W Freeze Off FREEZE=OFF R Freeze Status GET=FREEZE W Menu On MENU=ON W Menu Off MENU=OFF W Auto PC RC=AUTOPC W Up RC=UP W Down RC=DOWN W Right RC=RIGHT W Left RC=LEFT W OK RC=OK W High Altitude mode On HIGHALT=ON W High Altitude mode Off HIGHALT=OFF R High Altitude mode status GET=H
e:000A INVALID_PARAMETER ENGLISH R Unsupported item: this command parameter can't support < GET=INVALID > e:000A INVALID_PARAMETER • If the projector didn’t receive to finish a command within 5 seconds, it will timeout and you need to resend the command. • No case sensitive.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
