LV-WX300/LV-X300/LV-S300 Gebruikershandleiding Nederlands MULTIMEDIAPROJECTOR
Inhoud Inhoud ............................................. 2 Veiligheidsinstructies ..................... 3 Inhoud van de verpakking .......... 13 Buitenaanzicht van de projector 14 Bedieningselementen en functies 15 De projector positioneren ........... 19 Een locatie kiezen ...........................19 De gewenste beeldgrootte van de projectie instellen ............................20 Bewaken en controleren met de computer ........................................46 Configureren van Laninstellingen .....
Voordat u de projector installeert en gebruikt, dient u deze handleiding zorgvuldig door te lezen. Deze projector biedt diverse handige functies en eigenschappen. Als u zorgvuldig omgaat met de projector kunt u al deze eigenschappen volledig benutten en blijft de projector jarenlang in topconditie. Als u onjuist omgaat met de projector, zal dit niet alleen nadelig zijn voor de levensduur, maar kunnen er zich ook storingen en ongelukken voordoen en kan er gevaar voor brand ontstaan.
Veiligheidsmaatregelen WAARSCHUWING: • DEZE APPARATUUR MOET WORDEN GEAARD. • STEL DIT APPARAAT NOOIT BLOOT AAN REGEN OF VOCHT OM HET RISICO OP BRAND OF EEN ELEKTRISCHE SCHOK TE BEPERKEN. • Deze projector produceert een intensief licht via de projectielens. Kijk niet direct in de lens, omdat dit uw ogen kan beschadigen. Let met name goed op dat kinderen niet direct in de straal kijken. • Installeer de projector in een geschikte positie. Wanneer u dat niet doet, kan dat resulteren in brandgevaar.
Gebruik geen accessoires die niet door de fabrikant worden aangeraden, omdat dit eventueel gevaarlijk kan zijn. Plaats deze projector nooit op een onstabiele ondergrond. De projector kan vallen, wat een kind of volwassene ernstig kan verwonden en de projector kan beschadigen. Gebruik uitsluitend een wagentje of standaard die door de fabrikant wordt aanbevolen of die bij de projector is verkocht. Gebruik gereedschap of een wandmontagekit om de projector veilig aan een muur of in een rek te bevestigen.
Eisen aan de wisselstroomkabel De wisselstroomkabel die bij deze projector is geleverd, voldoet aan de gebruikseisen voor het land waar u de projector hebt aangeschaft. Wisselstroomkabel voor de Verenigde Staten en Canada: De wisselstroomkabel die in de Verenigde Staten en in Canada wordt gebruikt, staat in de lijst van Underwriters Laboratories (UL) en is gecertificeerd door de Canadian Standard Association (CSA). De wisselstroomkabel heeft een geaarde stekker.
Nederlands Voorzorgsmaatregelen voor het gebruik Dit onderdeel bevat belangrijke veiligheidsinformatie. Zorg dat u daarom de volgende informatie zorgvuldig van tevoren doorleest zodat u de projector correct en veilig kunt gebruiken. Waarschuwing Als een van de volgende situaties optreden, schakelt u het apparaat uit, trekt u de stekker uit het stopcontact en neemt u contact op met de klantenservice van Canon. Doet u dit niet, dan kan dat resulteren in brand of een elektrische schok.
Waarschuwing Lees aandachtig de volgende punten met betrekking tot de stroombron, stroomstekker en omgang met stekkers. Doet u dit niet, dan kan dat resulteren in brand, elektrische schok of letsel. • Gebruik geen stroombron met een ander voltage dan is aangegeven (AC 100 - 240 V). • Trek niet aan de stroomkabel en houd altijd de stekker vast als u deze lostrekt. De stroomkabel kan anders beschadigd raken. • Steek geen metalen objecten in de contactonderdelen van de stroomstekker of aansluitingen.
Nederlands Pas op Let op de volgende punten met betrekking tot het installeren en omgaan met de projector. • Als de projector gedurende langere tijd niet wordt gebruikt, trekt u uit veiligheidsoogpunt de stekker uit het stopcontact. Doet u dit niet, dan kan dat resulteren in brand. • De temperatuur van de behuizing rond en boven de luchtopeningen kan hoog oplopen als de projector wordt gebruikt. Het aanraken van deze plekken tijdens het gebruik kan resulteren in brandwonden op de handen.
Waarschuwing Bij vervanging van de lamp, of wanneer de lamp beschadigd is, dient u op de volgende punten te letten. Wanneer u dit niet doet, kan dat resulteren in een elektrische schok of letsel. • Zorg ervoor dat u de stekker uit het stopcontact haalt voordat u de lamp vervangt. • Wanneer de lamp beschadigd is, kunnen er glasscherven binnen in de projector terechtkomen. Neem contact op met de klantenservice van Canon voor reiniging en inspectie van de binnenzijde van de projector en vervanging van de lamp.
Nederlands Waarschuwing voor het bekijken van 3D-content Pas op Let op de volgende punten als u 3D-content bekijkt. • Patiënten die gevoelig zijn voor licht, patiënten met een hartkwaal, zwangere vrouwen, ouderen en personen met een ernstige ziekte en/of die lijden of hebben geleden aan epilepsie mogen geen 3Dcontent bekijken. • We raden het bekijken van 3D-content af als u zich niet goed voelt, als u moe bent of als u alcohol hebt gedronken.
Voor veilig gebruik Let op de volgende punten als u de projector verplaatst of transporteert. • Deze projector is een precisie-instrument. Stoot er niet tegen en zorg dat er niet tegen kan worden gestoten. Dit kan een defect veroorzaken. • Gebruik verpakkings- of schokdempend materiaal dat u bij aankoop van de projector heeft verkregen en dat gebruikt is voor het transporteren of verzenden van de projector, niet opnieuw.
Nederlands Inhoud van de verpakking (VS) (EU) Projector (China) Stroomkabel 1,8m (70,8") Belangrijke informatie over de cd en snelgids Garantiekaart Computerkabel 1,8 m (70,8") (5K.1VC09.
Buitenaanzicht van de projector 1. Voorkant/bovenkant 1 5 2 3 8 4 6 7 2. 3. 4. 5. 6. 7. 8. 9. Extern besturingspaneel (Zie "Projector" op pagina 15 voor meer details.) Lampdeksel Ventilatie (warme lucht uit) Snelontgrendelingsknop Focusring en zoomring IR-sensor afstandsbediening voorkant Projectielens Ventilatie (lucht in) Lenskap 9 Achter/onderkant LV-S300 10 11 12 13 14 15 16 17 18. 19. 20. 21. 22. LV-X300/LV-WX300 18 19 21 20 14 10. 11. 12. 13. 14. 15. 16. 17.
Projector 7. 1 8 2 3 4 5 6 7 1. 2. 3. 4. 5. 6. 9 10 11 12 13 8. 9. 11 Focusring Hiermee past u de scherpstelling van het geprojecteerde beeld aan. Zie "Het beeldformaat en de helderheid nauwkeurig afstellen" op pagina 33 voor meer details. Zoomring Hiermee past u de grootte van het beeld aan. Zie "Het beeldformaat en de helderheid nauwkeurig afstellen" op pagina 33 voor meer details. POWER (Aan/uit-indicator) Brandt of knippert als de projector wordt gebruikt.
Afstandsbediening: LV-RC08 7. 2 8 9 10 3 11 4 5 12 13 9 6 14 1 8. 9. 7 10. 1. 2. 3. 4. 5. 6. 16 POWER (AAN/STAND-BY) Dit zet de projector in de stand-bymodus of aan. Zie "De projector opstarten" op pagina 28 en "De projector uitschakelen" op pagina 43 voor meer details. INPUT Opent de bronselectiebalk. Zie "Schakelen tussen ingangssignalen" op pagina 32 voor meer details. Links Selecteert de gewenste menu-items en voert de aanpassingen uit.
Nederlands De afstandsbediening voor het eerst gebruiken Trek het kaartje weg voordat u de afstandsbediening gebruikt. Effectief bereik van de afstandsbediening De IR-sensor (infrarood) van de afstandsbediening bevindt zich aan de voorkant van de projector. De afstand tussen de afstandsbediening en de sensor mag niet meer dan 8 meter (~ 26 voet) bedragen. Zorg dat niets de infraroodstraal tussen de afstandsbediening en de IR-sensor op de projector blokkeert.
Software van derden Dit product bevat softwaremodules van derden. • uIP (micro IP) version 0.9 Raadpleeg de onderstaande licentietekst met voorwaarden. Copyright © 2001-2003, Adam Dunkels. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Een locatie kiezen Welke installatie u het beste kunt gebruiken is afhankelijk van de indeling van de ruimte en uw persoonlijke voorkeur. Houd rekening met de grootte en de positie van het scherm, de nabijheid van een stopcontact en de afstand tussen de projector en de andere apparatuur. De projector is ontworpen om te worden geïnstalleerd in een van de volgende mogelijke installatielocaties: 1. Tafel voor Selecteer deze instelling als u de projector dicht bij de vloer voor het scherm installeert.
De gewenste beeldgrootte van de projectie instellen De afstand van de lens van de projector tot het scherm, de zoominstellingen (indien beschikbaar) en het videoformaat zijn allemaal factoren die de grootte van het geprojecteerde beeld bepalen. 4:3 is de oorspronkelijke beeldverhouding van LV-S300/LV-X300.
Nederlands Wanneer er dunne strepen te zien zijn op de geprojecteerde beelden Dit is te wijten aan interferentie van de oppervlakte van het scherm en is geen defect. Plaats het scherm opnieuw of verander de brandpuntsafstand een beetje. De positie van de projector bij een bepaalde schermgrootte bepalen 1. 2. 3. 4. De beeldgrootte selecteren. Zie de tabel en zoek de de schermgrootte die het dichtst de grootte van uw beeld benadert in de linkerkolommen met de naam "Beeldgrootte".
Indeling van de projector De beeldgrootte varieert en is afhankelijk van de afstand tussen het scherm en de projector.
Aansluiting Nederlands Als u een signaalbron aansluit op de projector, volg dan deze instructies: 1. 2. 3. Schakel alle apparatuur uit voordat u verbindingen maakt. Gebruik de juiste signaalkabels voor elke bron. Zorg dat de kabels goed zijn geplaatst. • Zie de gebruikershandleiding van ieder apparaat voor meer details over de aansluitingen ervan. • Neem contact op met uw leverancier voor details over de aansluitingen.
• Voor sommige computers is het nodig aanvullende connectoren of adapters voor analoge RBG-uitgangen te gebruiken om deze op de projector aan te sluiten.
EXPAND (UITBREIDEN) of ENHANCED (VERBETERD) -> NORMAL (NORMAAL) • Raadpleeg de gebruikershandleiding van uw DVD-speler voor meer details. • Wanneer u overschakelt naar HDMI-invoer, kan de geprojecteerde afbeelding gedurende 1 seconde incorrecte kleuren weergeven. Dit is geen defect van het product.
De projector op een S-videoapparaat aansluiten: 1. 2. 3. Neem een S-videokabel en sluit die aan op de S-video-uitvoeraansluiting van het videobronapparaat. Sluit het andere uiteinde van de S-videokabel aan op de S-VIDEO-aansluiting van de projector.
Videokabel (optioneel) Nederlands Als het audiosysteem is aangesloten, kan dit via de schermmenu's (OSD) van de projector worden bediend. Zie "Het geluid aanpassen" op pagina 42 voor meer details.
Bediening De projector opstarten 1. Sluit het netsnoer aan op de projector en stop de stekker in een stopcontact. Schakel het stopcontact in (indien van toepassing). Controleer of het POWER-indicator op de projector oranje brandt zodra de stroom is ingeschakeld. • Vraag uw installateur een aardlekschakelaar te installeren. Wanneer u de projector niet gebruikt, zorg er dan voor dat u de stroom afsluit bij de aardlekschakelaar.
Nederlands De menu's gebruiken De projector beschikt over schermmenu's (OSD) waarin u de instellingen kunt aanpassen. Hieronder ziet u een overzicht van het OSD-menu. Pictogram hoofdmenu WEERGAVE hoofdmenu Uit Schermkleur Beeldverhouding Keystone Positie Fase Totaal aantal punten H D.Zoom 3D 3D sync Selecteren Submenu Huidig ingangssignaal Auto Status 16 0 Normaal MENU Sluit Analog RGB Ga naar de vorige pagina of naar afsluiten.
De wachtwoordbeveiliging gebruiken Met het oog op beveiliging en het voorkomen van ongeoorloofd gebruik is de projector voorzien van een optie voor wachtwoordbeveiliging. U kunt het wachtwoord instellen via het schermmenu (OSD). Voor meer details over het gebruik van het OSD-menu, raadpleegt u "De menu's gebruiken" op pagina 29. Het is buitengewoon vervelend als u de inschakelblokkering activeert en vervolgens het wachtwoord vergeet. Druk de handleiding zo nodig af en noteer er uw wachtwoord in.
1. 2. 3. 4. Open het OSD-menu en ga naar het menu SYSTEEMINSTLL: Geavanceerd > Beveiligingsins Tellingen > Wachtwoord wijzigen. Druk op OK/IMAGE. Het bericht 'HUIDIG WACHTWOORD INVOEREN' wordt weergegeven. Voer het oude wachtwoord in. • Als het wachtwoord juist is, verschijnt het bericht 'NIEUW WACHTWOORD INVOEREN'. • Als het wachtwoord niet juist is, verschijnt drie seconden de wachtwoordfoutmelding op het scherm.
Schakelen tussen ingangssignalen De projector kan tegelijkertijd op verschillende apparaten worden aangesloten. De beelden van deze apparaten kunnen echter niet tegelijkertijd op een volledig scherm worden weergegeven. Zorg dat de functie Automatisch zoeken in het menu INVOER is ingesteld op Aan (wat de standaardinstelling is van deze projector) als u wilt dat de projector automatisch signalen zoekt. U kunt ook handmatig door de beschikbare invoersignalen bladeren. 1. 2.
Het geprojecteerde beeld aanpassen Nederlands De projectiehoek aanpassen De projector is uitgerust met 1 verstelvoetje met snelontgrendeling en 1 verstelvoetje aan de achterzijde. Deze verstelvoetjes passen de beeldhoogte en projectiehoek aan. Zo past u de projector aan: 1. Druk op de snelontgrendelingsknop en til de voorkant van de projector op. Zodra het beeld op de gewenste plek is gepositioneerd, laat u de snelontgrendelingsknop los om het voetje vast te zetten in z'n positie. 2.
4. 5. Plaats de projector dichterbij en verder weg om de weergave aan te passen aan het formaat van het scherm. Indien nodig past u de focus opnieuw aan. Keystone corrigeren Keystone verwijst naar het effect waarbij het geprojecteerde beeld merkbaar groter is aan bovenkant of onderkant. Dit doet zich voor als de projector niet loodrecht op het scherm staat.
Als u details in het geprojecteerde beeld wilt zoeken, vergroot u het beeld. Gebruik de pijltoetsen om door het beeld te navigeren. • 1. 2. 3. 4. • 1. 2. 3. 4. 5. 6. 7. Met de afstandsbediening Druk op D.ZOOM +/- om de Zoombalk weer te geven. Druk op D.ZOOM + om het midden van het beeld te vergroten. Druk herhaaldelijk op de toets totdat de gewenste beeldgrootte is bereikt. Navigeer door het beeld met de pijltoetsen ( , , , ) op de projector of afstandsbediening.
Info over de beeldverhouding In de onderstaande afbeeldingen zijn de zwarte gedeelten inactief en de witte actief. OSD-menu's kunnen in deze ongebruikte zwarte gebieden worden weergegeven. 1. Auto: De verhouding van het beeld wordt aangepast aan de eigen resolutie van de projector in de horizontale breedte of verticale hoogte. Dit is handig wanneer u het scherm op de beste wijze wilt gebruiken zonder de beeldverhouding van het beeld te veranderen.
Handige functies tijdens een presentatie Nederlands Een beeldmodus selecteren De projector beschikt over verschillende beeldmodi waaruit u de modus kunt kiezen die het beste past bij uw gebruiksomgeving en het beeldtype van het ingangssignaal. Volg één van de volgende stappen om een geschikte gebruiksmodus te kiezen. • • Druk herhaaldelijk op OK/IMAGE op de afstandsbediening of projector totdat de gewenste modus is geselecteerd.
Aanpassen van Kleur Selecteer Kleur in het menu BEELD en pas de waardes aan door op afstandsbediening. / te drukken op projector of Lagere instelling levert minder verzadigde kleuren op. Wanneer de instelling te hoog staat, worden de kleuren op het beeld te fel, waardoor het beeld onrealistisch wordt. Aanpassen van Tint Selecteer Tint in het menu BEELD en pas de waardes aan door op afstandsbediening. / te drukken op projector of Hoe hoger de waarde, hoe roder het beeld.
De instellingen aanpassen: 1. 2. 3. 4. 5. 6. 7. 8. 9. Ga naar het menu BEELD en selecteer Kleuraanpassing op 6 assen. Druk op OK/IMAGE en de pagina Kleuraanpassing op 6 assen wordt geopend. Selecteer Kleur selecteren en druk op / om een kleur te kiezen uit Rood, Groen, Blauw, Cyaan, Magenta of Geel. Druk op om Tint te markeren en druk op / om het bereik ervan in te stellen. Een verhoging van het bereik omvat de kleuren die de twee naastliggende kleuren bevatten.
De presentatietimer instellen De presentatietimer kan de presentatietijd op het scherm weergeven zodat u uw presentatie beter kunt indelen. Volg onderstaande stappen om deze functie te gebruiken: 1. 2. Ga naar het menu SYSTEEMINSTLL: Basis > Presentatietimer en druk op OK/IMAGE om de pagina Presentatietimer te openen. Druk op om Vooraf ingestelde tijd te selecteren en stel de tijd van de timer in door te drukken op / .
• • Nederlands De TIMER-toets gebruiken TIMER is een multifunctionele toets. Wanneer de presentatietimer uitgeschakeld is, zal er een bevestigingsbericht worden weergegeven wanneer u op deze toets drukt. U kunt zelf beslissen om de timer al dan niet in te schakelen door de instructie op het scherm te volgen. Wanneer de presentatietimer ingeschakeld is, zal er een bevestigingsbericht worden weergegeven wanneer u op deze toets drukt.
Het beeld stilzetten Druk op FREEZE op de afstandsbediening om de het beeld stil te zetten. Het woord "FREEZE" wordt in de linkerbovenhoek weergegeven. Druk op een willekeurige toets op de projector of afstandsbediening om verder te gaan met afspelen. Hoewel het beeld op het scherm wordt gepauzeerd, blijven de beelden op de video of een ander apparaat doorlopen. Als de aangesloten apparaten geluid weergeven, blijft u het geluid horen hoewel het beeld op het scherm niet meer beweegt.
1. Druk op II POWER en er verschijnt een bevestiging. Wanneer u niet binnen enkele seconden reageert, verdwijnt het bericht. 2. Druk nogmaals op II POWER. De POWER-indicator knippert oranje en de lamp wordt uitgeschakeld. De ventilatoren blijven nog ongeveer 90 seconden draaien zodat de projector kan afkoelen. Wanneer het koelproces beëindigd is, zal het POWER-indicator oranje branden en zullen de ventilatoren stoppen.
3D-content bekijken Deze projector biedt ondersteuning voor het weergeven van 3D-content met het DLP Link-systeem. Deze projector ondersteunt 3D-beeld signalen in de formaten Frame Sequential/Frame Packing/TopBottom/Side-By-Side. U hebt de volgende items nodig om 3D-content te projecteren en te bekijken. • • • Apparaat geschikt voor 3D-content.
• Kinderen die 3D-content bekijken moeten altijd vergezeld zijn door een volwassene. Kinderen merken en geven niet altijd aan dat ze zich onwel voelen als ze 3D-content bekijken. Zorg er daarom altijd voor dat een volwassene bij het kind aanwezig is. De minimale aangeraden leeftijd voor het bekijken van 3D-content is zes jaar. • Zorg dat u op een geschikte afstand voor het scherm zit als u 3D-content bekijkt.
Bewaken en controleren met de computer Met een goede verbinding via een LAN-kabel en met LAN-besturingsinstellingen, kunt u de projector met een computer bedienen via een webbrowser of de PJLink™-toepassing (alleen LV-X300/LV-WX300) wanneer de computer en de projector verbonden zijn met hetzelfde LAN-netwerk. De LV-X300/LV-WX300 projector ondersteunt Crestron®-software en PJLink™. Een projector aansluiten op een computer, een voorbeeld.
Druk op om Toepassen te selecteren en druk op OK/IMAGE. Als de LAN-kabels niet correct zijn aangesloten, zullen de instellingen van Ip-adres van projector, Subnetmasker, Standaardgateway en Dns-server de waarde 0.0.0.0. weergeven. Controleer of de LAN-kabels correct zijn aangesloten en voer de bovenstaande procedure opnieuw uit.
3. Op de pagina Tools (Hulpmiddelen) kunt u de projector beheren, de instellingen voor LAN-besturing instellen en toegang via extern netwerkbeheer op deze projector beveiligen. i ii iv iii v vi i. Wanneer u het Crestron controlesysteem gebruikt, dient u de gebruikershandleiding van het Crestron controlesysteem te raadplegen voor informatie over de instellingen. ii. U kunt de projector een naam geven, bijhouden op welke plek hij staat en wie de projector beheert.
Op de Infopagina staat de informatie en status van deze projector. Nederlands 4. i ii i iii i. De informatie die u heeft ingevoerd in de pagina Tools (Hulpmiddelen) zal hier worden weergegeven en deze kolommen zijn leeg wanneer u e-Control™ voor het eerst gebruikt. ii. Als de projector niet normaal functioneert, zal de volgende informatie worden weergegeven.
De projector bedienen met de PJLink™-applicatie (alleen LV-X300/LV-WX300) Deze projector ondersteunt het standaardprotocol PJLink™ voor bediening van de projector en u kunt de functies van de projector controleren en bewaken met dezelfde applicatie voor projectoren van een ander model of van een andere fabrikant. Over PJLink™ • • • Om de PJLink™-functie te gebruiken is software van de PJLink™-toepassing nodig.
Opdracht Beschrijving Opmerking (parameter) POWR Aan/uit-functie 0 = Uitschakelen 1 = Inschakelen POWR? Vraag over de actieve status 0 = Stand-by 1 = Inschakelen 2 = Afkoelen 3 = Opwarmen INPT Schakelen tussen ingangen INPT? Vraag over schakelen tussen invoer AVMT Dempingsfunctie AVMT? Vraag over de status dempen Nederlands PJLink™ ondersteunde opdrachten De onderstaande tabel toont de opdrachten om de projector met het PJLink™-protocol te bedienen.
• Tijdens stand-by • Tijdens overschakelen tussen ingangsbronnen • Tijdens opdrachtverwerking • Tijdens de uitvoering van AUTO PC • Voordat het opstartscherm verdwijnt nadat de stroom is ingeschakeld. • Gebruik 1 computer om 1 projector te bedienen/te bewaken. • Voor de wijze waarop u bedient/bewaakt met PJLink™ raadpleegt u de bedieningshandleiding van de PJLink™-toepassing die u gebruikt.
Menubewerkingen Nederlands Menusysteem De schermmenu's (OSD) verschillen afhankelijk van het geselecteerde signaaltype. Hoofdmenu Submenu Opties Schermkleur Uit*/Lichtgeel/Roze/Lichtgroen/ Blauw/Schoolbord Beeldverhouding Auto*/Werkelijk/16:10 (alleen LV-WX300)/4:3/16:9 Keystone Positie 1. WEERGAVE Fase Totaal aantal punten H D.
Hoofdmenu Submenu Presentatietimer Opties Vooraf ingestelde tijd 1~240 minuten Timerweergave Altijd*/1 min./2 min./3 min./Nooit Positie Linksboven*/Linksonder/ Rechtsboven/Rechtsonder Aftelrichting Aftellen*/Optellen Geluidsherinnering Aan*/Uit Aan/Uit* 4. SYSTEEMINSTLL: Basis Taal (Language) Beeld kantelen H/V Tafel voor*/Tafel achter/Plafond voor/Plafond achter Automatisch uitschakelen Uitschakelen/5 min./10 min./ 15 min./20 min.*/25 min./30 min./ Inactief-timer Uitschakelen*/5 min.
5. SYSTEEMINSTLL: Geavanceerd Submenu Nederlands Hoofdmenu Opties Beveiligingsins Tellingen Wachtwoord wijzigen Inschakelblokkering Aan/Uit* Ondertitelinstellingen Ondertitels Aan/Uit* Ondertitelkanaal OT1*/OT2/OT3/OT4 Lan op stand-by Uit*/Aan PJLink-certificatie Uit*/Aan PJLink-wachtwoord wijzigen Lan-instellingen (alleen LV-X300/ LV-WX300) DHCP Aan*/Uit Ip-adres van projector Subnetmasker Standaardgateway Dns-server Toepassen Instellingen herstellen Invoer Beeldmodus 6.
Beschrijving van elk menu 1. WEERGAVE-menu FUNCTIE BESCHRIJVING Schermkleur Corrigeert de kleur van het geprojecteerde beeld als het projectieoppervlak niet wit is. Zie "Gebruik Schermkleur" op pagina 39 voor meer details. Beeldverhouding Er zijn diverse opties voor instelling van de beeldverhouding, afhankelijk van het apparaat waarvan het signaal afkomstig is. Zie "De beeldverhouding selecteren" op pagina 35 voor meer details. Keystone Corrigeert eventuele keystone-fouten in het beeld.
2. BEELD-menu Nederlands FUNCTIE BESCHRIJVING Beeldmodus Met de vooraf ingestelde beeldmodi kunt u de instellingen van het projectorbeeld aanpassen aan het type programma. Zie "Een beeldmodus selecteren" op pagina 37 voor meer details. Helderheid Past de helderheid van het beeld aan. Zie "Aanpassen van Helderheid" op pagina 37 voor meer details. Contrast Stelt de mate van verschil tussen donker en licht in het beeld in. Zie "Aanpassen van Contrast" op pagina 37 voor meer details.
4. SYSTEEMINSTLL: Basis-menu 5. SYSTEEMINSTLL: Geavanceerd-menu 58 FUNCTIE BESCHRIJVING Presentatietimer Herinnert de spreker eraan de presentatie binnen een bepaalde tijd af te ronden. Zie "De presentatietimer instellen" op pagina 40 voor meer details. Taal (Language) Hiermee stelt u de taal voor de schermmenu's (OSD) in. Zie "De menu's gebruiken" op pagina 29 voor meer details. Beeld kantelen H/V Zie "Een locatie kiezen" op pagina 19 voor meer details.
BESCHRIJVING Beveiligingsins Tellingen Zie "De wachtwoordbeveiliging gebruiken" op pagina 30 voor meer details. Nederlands FUNCTIE Ondertitelinstellingen Activeer de functie door Aan te kiezen als het geselecteerde ingangssignaal ondertitels bevat. • 5. SYSTEEMINSTLL: Geavanceerd-menu Ondertitelinstellingen Ondertitels: Plaatst de dialoog, verhaallijn en geluidseffecten van tv-programma's en video's, die ondertiteling bevatten, op het scherm (in de TV-gids wordt dit vaak aangegeven met "CC").
Onderhoud Onderhoud van de projector Uw projector heeft periodiek onderhoud nodig, afhankelijk van de omgevingsomstandigheden; het onderhoud dient alleen door geautoriseerd servicepersoneel te worden uitgevoerd. Neem contact op met uw leverancier voor instructies. Het enige dat u zelf regelmatig kunt doen, is de lens en behuizing schoonhouden. Verwijder nooit onderdelen van de projector, met uitzondering van de lamp. Neem contact op met uw leverancier als er andere onderdelen vervangen dienen te worden.
Het aantal lampuren bekijken De gebruiksduur van de lamp (lampuren) wordt automatisch berekend door de ingebouwde timer als de projector wordt gebruikt. De equivalente gebruiksduur wordt als volgt berekend: Totale aantal lampuren = (uren gebruikt in de modus Normaal) + 5/6*(uren gebruikt in de modus Economisch) Zie "Instellen van Lampmodus als Economisch" hieronder voor meer informatie over de modus Economisch. Informatie over het aantal lampuren bekijken: 1.
Het interval van de lampvervanging Wanneer het waarschuwend lichtje van de lamp rood oplicht of wanneer er een bericht op het scherm wordt weergegeven dat aangeeft dat u de lamp dient te vervangen, dient u een nieuwe lamp te installeren of contact op te nemen met uw leverancier. Een oude lamp kan storing in de projector veroorzaken. In sommige gevallen kan de lamp ontploffen. De LAMP (Lamp-indicator) en TEMP (Temperatuur-indicator) gaan branden als de lamp te heet wordt.
Reservelamp LV-LP37 (LV-X300/LV-S300)/ LV-LP39 (LV-WX300) • Zorg ervoor dat u de lamp vervangt door een lamp die los wordt verkocht en exclusief voor deze projector bedoeld is. Neem contact op met uw leverancier voor de aankoop van de lamp. • Om het risico van een elektrische schok te vermijden, dient u altijd de projector uit te schakelen en de stekker van het netsnoer uit het stopcontact te verwijderen alvorens u de lamp gaat vervangen.
• 1. Zorg ervoor de lamp te gebruiken die bij deze projector hoort, LV-LP37 (LV-X300/LV-S300)/ LV-LP39 (LV-WX300). Door gebruik van andere lampen kan de projector defect raken. 2. Schakel het apparaat uit en trek de stekker van de projector uit het stopcontact. Als de lamp heet is, wacht u ongeveer 45 minuten totdat de lamp is afgekoeld om letsel te voorkomen. Draai de schroeven van de lampkap los. 3. Verwijder het lampkapje van de projector.
Draai de schroef vast waarmee de lamp wordt vastgezet. • Een losse schroef kan tot een slechte verbinding leiden, met storingen als gevolg. • Draai de schroef niet te vast. 9. Zorg dat de hendel volledig plat ligt en goed vast op z’n plek zit. Nederlands 8. 10. Plaats de beschermingslaag van de nieuwe lamp op de lamphouder. 11. Plaats het lampkapje opnieuw op de projector, zoals staat aangegeven in de afbeelding. 2 1 12. Draai de schroeven van het kapje weer vast.
Indicatoren Lampje Voeding Status & beschrijving Temp Lamp Situaties gerelateerd aan de voeding Oranje Uit Uit Stand-bymodus. Groen Knippert Uit Uit Opstarten. Groen Uit Uit Normale werking. Oranje Knippert Uit Uit Normaal afkoelen bij uitschakelen. Rood Uit Uit FW Download. Groen Uit Rood Rood Knippert Uit Uit Starten van Color Wheel mislukt. Uitschakelen van scaler mislukt (gegevensonderbreking).
De projector schakelt niet in Oorzaak Oplossing Het netsnoer levert geen stroom. Steek het ene uiteinde van het netsnoer in de aansluiting op de projector en het andere uiteinde in het stopcontact. Zorg dat het stopcontact is ingeschakeld (indien van toepassing). De projector is aangezet tijdens de afkoelprocedure. Wacht tot de projector volledig is afgekoeld. Geen beeld Oorzaak Oplossing De videobron is niet ingeschakeld of niet correct aangesloten.
De LAN-functie kan niet worden gebruikt 68 Oorzaak Oplossing Er zijn problemen met de LANbesturingsinstellingen en de LANkabelverbinding. Controleer de LAN- besturingsinstellingen. Zie "Configureren van Lan-instellingen" op pagina 46 voor meer details. Controleer of de LAN-kabels correct zijn aangesloten. De webpagina wordt niet correct weergegeven in de webbrowser of de webpagina reageert niet. Laad de pagina opnieuw om de gegevens na wijziging op het scherm te zien.
Specificaties Nederlands Projectorspecificaties Alle specificaties kunnen zonder kennisgeving worden gewijzigd. LV-WX300 Weergavesysteem 1-CHIP DLP™ Optisch systeem Time-division kleurextractie, sequentiële weergave Projectielens Weergaveapparaat Modelnaam Type LV-X300 LV-S300 DMD Grootte / beeldverhouding 0,65" x 1/16:10 0,55" x 1/4:3 Aansturingssysteem DLP™ x 1 chip Aantal punten / Totaal aantal punten 1.024.000 (1280 x 800) 786.432 (1024 x 768) x 1 panel/1.024.000 x 1 panel/786.
Invoeraansluiting Modelnaam LV-X300 Ingang voor digitale pc/digitale video Aansluiting voor ANALOG PC / COMPONENT Analoge pc, component (mini D-sub 15-pin) Mini-DIN4 S-video-ingang RCA-aansluiting Video-ingang LAN-aansluiting Netwerkverbinding (100BASE-TX / 10BASE-T) Usb-poort Servicepoort CONTROL-aansluiting RS-232C (D-sub 9-pin) AUDIO IN-aansluiting Audiosignaal (3,5ϕ stereo-mini-aansluiting) AUDIO OUT-aansluiting Ingangssignaal LV-WX300 HDMI-aansluiting LV-S300 - - Audiosignaal (3
Nederlands Afmetingen 282 mm (W) x 114,5 mm (H) x 232 mm (D) / 11,1 in (W) x 4,5 in (H) x 9,1 in (D) (inclusief het uitsteeksel) 232 mm (9,1") 282 mm (11,1") 114,5 mm (4,5") 91 mm (3,6") Tolerantie:±2 mm (0,08 in) 71
Timingdiagram Ondersteunde timing voor PC-signaal Resolutie Modus Vernieuwingsfrequentie (Hz) Horizontale frequentie (kHz) Klok (MHz) 720 x 400 720 x 400_70 70,087 31,469 28,3221 VGA_60* 59,940 31,469 25,175 VGA_72 72,809 37,861 31,500 VGA_75 75,000 37,500 31,500 640 x 480 800 x 600 1024 x 768 VGA_85 85,008 43,269 36,000 SVGA_60* 60,317 37,879 40,000 SVGA_72 72,188 48,077 50,000 SVGA_75 75,000 46,875 49,500 SVGA_85 85,061 53,674 56,250 SVGA_120** (Reduce Blanking
Nederlands Ondersteunde timing voor HDMI (HDCP)-ingang Ondersteunde PC-timingen Resolutie Modus 720 x 400 720 x 400_70 VGA_60* VGA_72 VGA_75 VGA_85 SVGA_60* SVGA_72 SVGA_75 SVGA_85 SVGA_120** (Reduce Blanking) XGA_60* XGA_70 XGA_75 XGA_85 XGA_120** (Reduce Blanking) 1152 x 864_75 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 720 1280 x 768 1280 x 800 1280 x 1024 1280 x 960 1360 x 768 1440 x 900 1400 x 1050 1600 x 1200 1680 x 1050 1366 x 768 1600 x 900 1280 x 720_60* 1280 x 768_60* WXGA_60* WXG
Ondersteunde video-timingen Timing Resolutie Horizontale frequentie (kHz) Verticale frequentie (Hz) Dotklok Frequentie (MHz) 480i* 720 (1440) x 480 15,73 59,94 27 480p 720 x 480 31,47 59,94 27 576i 720 (1440) x 576 15,63 50 27 576p 720 x 576 31,25 50 27 720/50p** 1280 x 720 37,5 50 74,25 720/60p** 1280 x 720 45,00 60 74,25 1080/24P** 1920 x 1080 27 24 74,25 1080/30P 1920 x 1080 33,75 30 74,25 1080/50i*** 1920 x 1080 28,13 50 74,25 1080/60i*** 1920 x 1080 3
U kunt deze projector bedienen door opdrachten te versturen via de CONTROL-poort of de LAN-poort.
Beeldmodus Beeldverhouding Beeld kantelen H/V Automatisch zoeken S Presentatie IMAGE=PRESENTATION S Standaard IMAGE=STANDARD S sRGB IMAGE=SRGB S Film IMAGE=MOVIE S Gebruikersmodus1 IMAGE=USER_1 S Gebruikersmodus2 IMAGE=USER_2 L Beeldmodus GET=IMAGE S Beeldverhouding 4:3 ASPECT=4:3 S Beeldverhouding 16:9 ASPECT=16:9 S Beeldverhouding automatisch ASPECT=AUTO S Beeldverhouding werkelijk ASPECT=TRUE S Beeldverhouding 16:10 ASPEC
Bediening Hoogte Leeg aan BLANK=ON S Leeg uit BLANK=OFF L Leeg status GET=BLANK S Stilstaand beeld aan FREEZE=ON S Stilstaand beeld uit FREEZE=OFF L Stilstaand beeld status GET=FREEZE S Menu aan MENU=ON S Menu uit MENU=OFF S Auto pc RC=AUTOPC S Omhoog RC=UP S Omlaag RC=DOWN S Rechts RC=RIGHT S Links RC=LEFT S OK RC=OK S Hoogtemodus Aan HIGHALT=ON S Hoogtemodus Uit HIGHALT=OFF L Hoogtemodus statu
L 78 Niet-ondersteund item: deze e:000A opdrachtparameter INVALID_PARAMETER kan niet ondersteunen < GET=INVALID > e:000A INVALID_PARAMETER • Wanneer de projector geen heeft ontvangen om een opdracht binnen 5 seconden te voltooien, zal er een time-out plaatsvinden en dient u de opdracht opnieuw te verzenden. • Niet hoofdlettergevoelig.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.