User`s manual

T460/461/T462 Manual 26th Sept 2008. V2.79 Part B © JED Microprocessors Pty Ltd

Hitachi projectors (new group with 12 or 13 byte codes)

CP-RS55/RS56/RS57/RX60/RX61, CP-X2*/X6*,CP-X200*/X205*/S210/S220/S225/S235/S240,

CP-X245*/X250/X251*/X253*/X255*/X256*/X260*/X265*/X268*/X275/X300*/X305*/X308*,

CP-S310/S317/S318/X320*X325/X327,CP-X328,S/X335/X340/X345/S370/X380/X385/X400*,

/X417*/S420/X430/X440/X443 /X444/X445/CP-X505*/X600/X605*/X608*/X870/X880/X885,

/X980 /X985 /X990/X995/X1200/X1230/X1250/SX1350, SX5500, SX5600,

ED-X10*, X12*, X15*, X22*, S3170/X3250/X3280/S3350,ED-X3400/X3450,

PJ-TX10/TX100**, PJ-TX200**, PJ-TX300**,

Lots Viewsonic and 3M Hitachi Equivalents (3M-MP8746/MP8747/MP8775, 3M-X45/X55,

3M-X64*, 3M-X70/X75/X80,

3M-X90*.

InFocus LP800

* Needs setting of audio channels links to video channels. See: Error! Reference source not found..

** No audio

The following table shows the mapping of T460 channel number, the string sent, and the input associated with that channel in

the manual, and how it is identified on the on-screen menu: (Coms is at 19200 8N1) Reply mode supported.

T460 Channel TX code, byte 12 Input name in manual Function as identified on screen.

1 00h RGB IN 1 RGB IN 1

2 04h RGB IN 2 RGB IN 2, (BNC on some, missed in some)

3 01h VIDEO (or VIDEO 1) VIDEO (or VIDEO 1)

4 02h S-VIDEO (or VIDEO 2) S-VIDEO (or VIDEO 2)

5 05h COMPONENT VIDEO COMPONENT VIDEO (some only)

6 03h DIGITAL DIGITAL (some only), M1-D (some only)

7 06h COMPONENT or MIU COMPONENT or MIU

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.

Note: you MUST set the communications speed for MP8730 using projector menu to 19200 8N1

Hitachi projectors (old group with 3 or 4 byte codes)

CP-S845W/935W/940W/950W/955W/960W/970W, 3M-MP8770/8730/8755, ACER-7755C

The following table shows the mapping of T460 channel number, the string sent, and the input associated with that channel in

the manual, and how it is identified on the on-screen menu: (Coms is at 9600 8N1) Reply mode supported. Mute/Freeze sup.

T460 Channel TX codes Input name in manual Function as identified on screen.

1 31h 21h 21h RGB IN 1 (D-sub 15) RGB IN 1

2 31h 21h 22h RGB IN 2 (D-sub 15) RGB IN 2

3 31h 21h 11h VIDEO (or VIDEO 1) VIDEO (or S-VIDEO )

4 31h 21h 12h S-VIDEO (or VIDEO 2) S-VIDEO (or VIDEO 2) some only

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.

Note: you MUST set the communications speed using projector menu to 9600 8N1

NOTE: On most of these, channel 3 is Video AND S-Video. S-Video socket has preference, but users cannot switch

between them using the T460.