User`s manual

T460/461/T462 Manual 26th Sept 2008. V2.79 Part B © JED Microprocessors Pty Ltd

InFocus models: LP790

T460 Channel TX code Input name in manual Function as identified on screen*

1 (SRC0) VGA 1 Computer 1 **

2 (SRC1) S-Video 1 S-Video 1 **

3 (SRC2) CVBS 1 Video 1 **

4 (SRC3) VGA 2 Computer 2 **

5 (SRC4) S-Video 2 S-Video 2 **

6 (SRC5) CVBS 2 Video 2 **

7 (SRC6) DVI 1 DVI 1 **

8 (SRC7) DVI 2 DVI 2 **

* Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs to avoid duplication of channels.

** JED has not been able to identify what is shown on screen, and the manual from InFocus www.infocus.com.service

does not show what the screen shows. Please advise if users can confirm what is shown from a real projector. Check

wiring from the LP790 hardware manual. (We don’t have it!)

Some projectors in this range have an auto-source-select. THIS MUST BE DISABLED.

InFocus models: LP920/925/930

T460 Channel TX code Input name in manual Function as identified on screen

1 (SRC0) RGBHV Computer 1

2 (SRC1) Source 1 VESA-VGA Computer 2

3 (SRC2) Source 2 M1-Analog Video 1

4 (SRC3) Source 3 M1-Digital Video 2

5 (SRC4) Cable Wizard Analog RGB Video 3 *

6 (SRC7) Component Video BNC Video 3 *

7 (SRC8) Composite Video RCA Video 3 *

8 (SRC9) S-Video Video 3 *

* Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs to avoid duplication of channels.

(Sources 5 and 6 are not used.)

Some projectors in this range have an auto-source-select. THIS MUST BE DISABLED.

InFocus models: LP1000

T460 Channel TX code Input name in manual Function shown on screen

1 (SRC0) Computer 1- 5 BNCs Computer 1

2 (SRC1) Computer 2- VGA HD-15 Computer 2

3 (SRC2) Computer 3-Cable Wizard 2 – VESA-VGA Computer 3

4 (SRC3) Video 1-S-Video or Comp. video on BNC Video 1

5 (SRC4) Video 2-Composite video on RCA or BNC Video 2

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs to avoid duplication of

channels. Some projectors in this range have an auto-source-select. THIS MUST BE DISABLED.

InFocus LP1200 see Mitsubishi group 1)