User`s manual

T460/461/T462 Manual 26th Sept 2008. V2.79 Part B © JED Microprocessors Pty Ltd

Sanyo/Eiki Group 5, Sanyo PLC-SC10/XC10, PLC-SU60/XU60

Separate commands are provided FOR ALL CHANNELS. The table below shows how these are allocated. SEE

IMPORTANT WIRING NOTE RE CTS/RTS ON THESE IN FOLLOWING RS232 CONNECTION NOTES.

T460 Channel String sent Input Function (group 5)

1 C50 1 INPUT1 ANALOG RGB (via HDB 15 VGA to DVI cable)

2 C52 1 INPUT1 DVI-Digital (via DVI-Digital cable to PC)

3 C53 1 INPUT1 A/V input HDCP (via DVI to 5 RCA or DVI-DVI

cable) HDCP = “High-bandwidth Digital Content Protection”

4 C25 2 INPUT2 ANALOG RGB (via HDB 15 VGA connector/cable)

5 C26 2 INPUT2 ANALOG RGB (via SCART-VGA cable)

6 C33 3 INPUT3 VIDEO (composite) mode set via RCA connector

7 C34 3 INPUT3 S-Video into S-Video DIN sub connector

8 C35 3 INPUT3 Y, Pb/Cb, Pr/Cr SET (COMPONENT)

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.

Sanyo/Eiki Group 6, Sanyo PLC-SU50/SE20/SL20/SU51/SU55, PLC-WXU30, PLC-XE20/XL20/XU25 PLC-

XU50/XU56 PLC-XU58/XU83/XU84/XU86/XU87/XU88/XU100/XU101/XU110/XU111/XU115.

PLC-XU105/Eiki XB42 codes* for first 3 channels.

Eiki LC-SB20/SB21/XB20/XB21/XB25/XB26/XB27/XB29/XB30/XB40/XB41

Canon LV-5210/5220/7210/7215/7220/7225/7545, Christie-LX25

Separate commands are provided FOR ALL CHANNELS. SEE IMPORTANT WIRING NOTE RE CTS/RTS ON THESE

MODELS IN FOLLOWING RS232 CONNECTION NOTES.

T460 Channel String sent Input Function (group 6)

1 C50/C05* 1 INPUT1 ANALOG RGB (via DVI to HDB 15 VGA cable)

2 C52/C06* 1 INPUT1 DVI-Digital (via DVI-Digital cable to PC)

3 C53/C07* 1 INPUT1 A/V input HDCP (via DVI to 5 RCA or DVI-DVI cable)

HDCP = “High-bandwidth Digital Content Protection”

4 C24 2 INPUT2 Component Y, Pb/Cb, Pr/Cr (via VGA to Comp cable)

5 C25 2 INPUT2 ANALOG RGB (HDB 15 VGA)

6 C26 2 INPUT2 SCART (via VGA to SCART 21pin cable)

7 C33 3 INPUT3 Composite Video (RCA)

8 C34 3 INPUT3 S-Video

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.

Sanyo/Eiki Group 7, Sanyo PLV-Z1/Z2, Christie LX20.

Separate commands are provided FOR ALL CHANNELS.

T460 Channel String sent Function (group 7)

1 C05 Computer Input: ANALOG RGB (HDB 15 VGA)

2 C07 AV mode … probably will not be used … use 3/4/5 (Not LX20)

3 C08 Computer Input: DVI-Digital (Not PLV-Z1, -Z2)

4 C23 Composite Video on RCA

5 C24 S-Video input on DIN 4

6 C25 Component Y, Pb/Cb, Pr/Cr (via 3-RCA)

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.