User`s manual

T460/461/T462 Manual 26th Sept 2008. V2.79 Part B © JED Microprocessors Pty Ltd

Sanyo/Eiki Group 14, Sanyo PLV-Z3, Z4, Z5

Separate commands are provided FOR ALL CHANNELS.

T460 Channel String sent Input Function (group 14)

1 C50 Computer ANALOG RGB (via DVI to HDB 15 VGA cable)

2 C51 Computer SCART (via VGA to SCART 21pin cable)

3 C53 HDMI 1 High-Definition Multimedia Interface

4 C54 HDMI 2 High-Definition Multimedia Interface

5 C23 Video Composite Video RCA

6 C24 Video S-Video

7 C25 Video Component Video 1

8 C26 Video Component Video 2

Don’t forget to set all unused T460 channels to “Skip” to jump over blank/unused inputs.

Sanyo/Eiki Group 15, Sanyo PLC-XU88Alt, PLC-XU110Alt, PLC-XU111Alt, PLC-XU115Alt, PLC-WXU30ALT

(Alternate channel allocation from Group 6 inc wireless)

Separate commands are provided FOR ALL CHANNELS.

SEE IMPORTANT WIRING NOTE RE CTS/RTS ON THESE MODELS IN FOLLOWING RS232 CONNECTION

NOTES.

T460 Channel String sent Input Function (group 15)

1 C50 1 INPUT1 ANALOG RGB (via DVI to HDB 15 VGA cable)

2 C24 2 INPUT2 Component Y, Pb/Cb, Pr/Cr (via VGA to Comp cable)

3 C25 2 INPUT2 ANALOG RGB (HDB 15 VGA)

4 C33 3 INPUT3 Composite Video (RCA)

5 C34 3 INPUT3 S-Video

6 C81 INPUT WIRED (Some only)

7 C82 INPUT WIRELESS

8 C83 INPUT VIEWER (Some only)