Operation Manual


39


This projector has the picture screen resize function, which enables you to customize the image size.

Provide the image to fit the screen size.

True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1280 x 800), the projector enters
to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image.
When adjusted, the arrows will turn blue. When
reached to the correction limits, the arrows will
disappear.
Full
Provide the full screen image.

• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
• The image data in other than 1280x800 is
modified to fit the screen size in initial mode.
• , True and  are disabled
and cannot be displayed when , 575i, ,
 , 1035i or  is selected in the PC
System Menu (p.31).
• When True is selected in the Screen menu,
 can not be selected.
1
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select  and then press
the Point ► or the OK button.
Use the Point ▲▼ buttons select the
desired item and then press the OK button .

Provide the last stored aspect screen image.

Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually
with this function. Press the Point ► button at
 . and the Custom adjustment menu
is displayed on the screen, you can use the
Point ▲▼ buttons to choose the item you want
to adjust.
 ...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On, the aspect
ratio is fixed. The 
appears dimmed and becomes
unavailable. Adjust 
H, then the screen scale is
automatically modified based
on the aspect ratio.
 .. Adjust the Horizontal/Vertical
screen position.
 ....... Save the adjusted scale or
position to all the inputs. Press
the OK button at 
to display a confirmation box.
To save the scale or position,
press the OK button at “Yes”.
When  is selected,
the saved scale or position is
used.
Reset ............. Reset the all adjusted values.
Press the OK button at Reset
to display a confirmation box.
To reset, press the OK button
at “Yes”.


• When no signal is detected,  is set
automatically .
• The adjustable range for  and
 is limited depending on the input
signal.

Scale the image proportionally to fit the entire
screen. Either side of image may go over the
screen.
