C INSTRUCTION MANUAL E Y P O E INSTRUCTION MANUAL
Thank you for purchasing a Canon product. The EOS-1Ds Mark III is a top-of-the-line, high-performance digital SLR camera with a large, fine-detail, 21.10-megapixel CMOS sensor (approx. 36 x 24 mm) and Dual “DIGIC III.” It also features highprecision and high-speed 45-point Area AF (19 cross-type points and 26 Assist AF points) and approx. 5 fps continuous shooting.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. The accessories included can also be checked in the System Map (p.194).
Conventions Used in this Manual Icons in this Manual <6> indicates the Main Dial. <5> indicates the Quick Control Dial. <9> indicates the Multi-controller. <0> indicates the SET button. 9 or 8 indicates that the respective function remains active for 6 sec. or 16 sec. respectively after you let go of the button. In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Contents Introduction Item Check List ..................................................................................................3 Conventions Used in this Manual.......................................................................4 Index to Features ...............................................................................................8 Handling Precautions .......................................................................................12 Quick Start Guide...........................
Contents 6 3 Setting the AF and Drive Modes 4 Exposure Control 81 Selecting the AF Mode .................................................................................... 82 Selecting the AF Point ..................................................................................... 84 When Autofocus Fails...................................................................................... 86 Manual Focusing ..........................................................................................
Contents 7 8 Sensor Cleaning 131 Automatic Sensor Cleaning............................................................................132 Appending Dust Delete Data..........................................................................133 Manual Sensor Cleaning................................................................................
Index to Features Power Battery • Charging • Calibration • Battery check • Battery information Power outlet Auto power off Î p.26 Î p.28 Î p.29 Î p.187 Î p.31 Î p.47 White balance Menus & Basic Settings Menus Camera setting display LCD brightness adjustment Language Date/Time Beeper Shoot w/o card Recording Images Î p.43 Î p.186 Î p.129 Î p.46 Î p.46 Î p.43 Î p.43 C Memory card formatting Î p.47 Selecting the memory card Î p.73 Create/select a folder Î p.75 File name Î p.
Index to Features Mirror lockup Self-timer Î p.104 Î p.88 Shooting Program AE Shutter-priority AE • Safety shift Aperture-priority AE Manual exposure Bulb Î p.92 Î p.94 Î p.160 Î p.96 Î p.98 Î p.102 Î p.99 Î p.100 Î p.101 Î p.158 C Î p.105 Î p.106 Î p.106 Î p.110 Î p.114 Î p.178 Î p.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide 1 Insert the battery. (p.29) 2 Attach the lens. (p.35) 3 Set the lens focus mode switch to . (p.35) 4 5 14 Take off the cap and insert a fullycharged battery. Align the red dot. C Y P O Insert a memory card. (p.32) The left slot is for the CF card, and the right slot is for the SD card. Set the power switch to <1>. (p.
Quick Start Guide Set the camera to the default settings. (p.49) 6 On the menu screen under the [7] tab, select [Clear all camera settings]. • Press the button and turn the <6> <5> dial to select it, then press <0>. • The Program AE mode will take effect. Focus the subject. (p.36) 7 8 9 Aim the Area AF over the subject. Press the shutter button halfway, and the camera will focus the subject. C Y P O Take the picture. (p.36) Press the shutter button completely to take the picture.
Nomenclature Lens mount index (p.35) Mirror (p.104) Self-timer lamp (p.88) Lens lock pin Shutter button (p.36) Lens release button (p.35) Strap mount (p.24) Lens mount Contacts (p.13) Grip Depth-of-field preview button (p.97) C Vertical-grip on/off switch (p.39) Y P O Tripod socket Body number Vertical-grip FE lock/ Multi-spot metering button (p.39, 105/91) Vertical-grip Main Dial (p.39, 37) Hand strap E1 mount Vertical-grip shutter button (p.39, 36) 16 Body cap (p.
Nomenclature LCD panel illumination button (p.102) Hot shoe Exposure compensation/ Aperture button (p.99/98) FE lock/Multi-spot metering button (p.105/91) Flash-sync contacts Focal plane mark ISO speed set button (p.56) Metering mode selection/Flash exposure compensation button (p.90/105) <6> Main Dial (p.37) Shooting mode selection button (p.92) Top LCD panel (p.19) AF start button (p.82/83) AF mode selection/Drive mode selection button (p.
Nomenclature Info/Trimming orientation button (p.114, 116, 186/145) LCD Monitor (p.41, 129) Eyecup (p.39) Menu button (p.41) SD card slot (p.32) WFT-E2 II A/B/C/D or WFT-E2/A mounting hole Memory card slot cover (p.32) Extension system terminal Terminal cover CF card slot (p.32) Playback button (p.116) C Erase button (p.128) Rear LCD Panel (p.20) Y P O CF card eject button (p.33) Access lamp (p.34) Memory card slot cover release handle (p.32) Recording microphone (p.
Nomenclature Top LCD Panel Aperture AEB amount Dust Delete Data acquisition (- -) Shutter speed Bulb (buLb) Bulb exposure time (min.:sec.
Nomenclature Rear LCD Panel External media connection icon*3 External media selection icon*3 White balance correction SD card indicator White balance Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom P Color temperature SD card selection icon CF card indicator CF card selection icon Image size 3 Large 4 Medium1 5 Medium2 6 Small 1 RAW 9 Small RAW C Y P O Custom white balance acquisition display ([ * ]) Monochrome shooting Wired LAN connection*1 Wireles
Nomenclature Viewfinder Information Center spot metering circle Area AF ellipse Focusing screen AF point : Cross-type points : Assist AF points Exposure level indicator Max.
Nomenclature Battery Pack LP-E4 Lock lever Contacts Battery release handle Handle end Protective cover Contact end Battery Charger LC-E4 Charger for Battery Pack LP-E4. (p.
Nomenclature AC Adapter Kit ACK-E4 Powers the camera from a household power outlet. (p.
Nomenclature Attaching the Neck Strap and Hand Strap E1 Using the USB Cable Protector Strap USB cable protector Y P O Terminal cap Interface cable Extension system terminal C Hand strap E1 (sold separately) 1 2 4 5 3 Attach the strap 6 After attaching the strap, pull it at the buckle to take up the slack and to make sure it does not loosen. Attach the extension system terminal cap securely, making sure it is not loose. Be careful not to lose it.
1 Getting Started Y P O This chapter explains preliminary steps and basic camera operations.
Recharging the Battery 1 Connect the charger to a power outlet. Connect the power plug to a power outlet, and connect the power cord to the charger. When no battery is attached, all the indicator lamps will be off. the protective covers 2 Remove from the charger and battery. Remove the protective cover on the charger by sliding it out. the battery. 3 Recharge Slide in the battery into the charger’s slot as shown by the arrow, and make sure it is securely attached.
Recharging the Battery Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power. After recharging the battery, detach it and unplug the power cord from the power outlet. When not using the battery and charger, attach the protective covers. Use the battery in an ambient temperature range of 0°C - 45°C / 32°F - 113°F.
Recharging the Battery The lamp blinks in red. This indicates that you should calibrate the battery so that the correct battery level is detected and the camera’s battery level indicator can display the correct battery level. Calibration is not a required operation. If you want to just recharge the battery, you can let the battery start recharging automatically after about 10 sec. If you want to do the calibration, press the button while the lamp is blinking in red.
Installing and Removing the Battery Installing the Battery Load a fully charged LP-E4 battery pack into the camera. 1 Remove the battery compartment cap. Grasp both sides of the cap and pull it out. the battery. 2 Insert Insert the battery firmly all the way, and turn the release handle as shown by the arrow. Y P O Checking the Battery Level C When the power switch is set to <1> (p.
Installing and Removing the Battery Battery Life Temperature At 23°C / 73°F At 0°C / 32°F Possible Shots Approx. 1800 Approx. 1400 The figures above are based on a fully-charged LP-E4, no Live View shooting, and CIPA (Camera & Imaging Products Association) testing standards. The actual number of shots may be fewer than indicated above depending on the shooting conditions. Pressing the shutter button halfway for long periods or operating only the autofocus can also reduce the number of possible shots.
Using a Household Power Outlet With AC Adapter Kit ACK-E4, you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the DC plug. Connect the DC Coupler’s plug to the AC adapter’s DC terminal. the power cord. 2 Connect Connect the power plug to the power outlet, then connect the power cord to the AC adapter. Y P O the DC Coupler. 3 Insert Insert the coupler firmly all the way, C and turn the release handle as shown by the arrow.
Installing and Removing the Memory Card The camera can use a CF card and SD card. Images can be recorded with at least one memory card installed in the camera. If both card slots have a card, you can select which card to record images with or record the same images simultaneously on both cards. (p.73) If you use an SD card, be sure the write protect switch is set upward to enable writing/erasing. Installing a Card 1 Open the cover. Flip out and turn the cover release handle as shown by the arrow.
Installing and Removing the Memory Card the power switch to <1>. 4 Set X The number of possible shots will be displayed on the top LCD panel and in the viewfinder. X The rear LCD panel will indicate which memory card(s) has been installed. The images will be recorded to the memory card with the < > arrow next to the respective card’s indicator. Memory card selection icon CF card indicator SD card indicator The camera is compatible with both Type I and Type II CF cards which differ in thickness.
Installing and Removing the Memory Card The access lamp lights during any of the following operations: The image is being exposed, being written to or read by the memory card, being erased, or data is being transferred. While the access lamp is lit, never do any of the following. Doing so may damage the image data. It may also damage the memory card or camera. • Opening the card slot cover. • Removing the battery. • Shaking or banging the camera around.
Mounting and Detaching a Lens Mounting a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. the lens. 2 Attach Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. Y P O the lens, set the focus mode 3 On switch to . C4 If it is set to , autofocus will not be possible. Remove the front lens cap.
Basic Operation Power/Quick Control Dial Switch <2> : The camera is turned off and does not operate. Position for when you do not use the camera. <1> : The camera operates. : The camera and <5> dial operate. (p.38) Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display . To save battery power, the camera turns off automatically after about 1 minute of non-operation.
Basic Operation Pressing completely This releases the shutter and takes the picture. If you press the shutter button completely without pressing it halfway first or if you press the shutter button halfway and then press it completely immediately, the camera will take a moment before it takes the picture. Even during the menu display, image playback, and image recording, you can instantly go back to shooting-ready by pressing the shutter button halfway.
Basic Operation <5> Using the Quick Control Dial for Selecting Before using the <5> dial, set the power switch to . (1) After pressing a button, turn the <5> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <5> dial to set the desired setting. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.
Basic Operation Vertical Shooting The bottom of the camera provides a shutter button, <6> Main Dial, AF point selection button, AE Lock button, AF Start button, and FE lock/Multi-spot metering button all for vertical shooting. Before using the vertical shooting controls, set the vertical operation on/ off switch to <1>. When not using the vertical shooting controls, set the switch to <2> to prevent accidental operation. Y P O Adjusting the Viewfinder Clarity 1 Remove the eyecup.
Basic Operation Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Y P O Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3. Press the shutter button lightly with your right hand’s index finger. 4. Press your arms and elbows lightly against the front of your body. 5. Press the camera against your face and look through the viewfinder. 6.
Menu Operations By setting various optional settings with the menus, you can set the Picture Style, date/time, Custom Functions, etc. While looking at the LCD monitor, you use the button on the camera back and the <6> <5> dials.
Menu Operations Menu Setting Procedure 1 Display the menu. Press the button to display the menu. a tab. 2 Select Turn the <6> dial to select a tab. a menu item. 3 Select Turn the <5> dial to select the menu Y P O item, then press <0>. C the setting. 4 Select Turn the <5> dial to select the desired setting. the desired setting. 5 SetPress <0> to set it. the menu. 6 ExitPress the button to exit the menu and return to camera shooting. You can also use <9> to select the tab and menu item.
Menu Operations Menu Settings 1 Shooting 1 (Red) Page White balance Q / W / E / R / Y / U / I / O (1 - 5) / P (2500 - 10000) / PC-1 - 5 63 Custom WB regist. Manual registration of white balance data 64 WB SHIFT/BKT WB correction: B/A/M/G bias, 9 levels each WB-BKT: B/A and M/G bias, single-level increments, ±3 levels 70 71 Color space sRGB / Adobe RGB Picture Style Standard / Portrait / Landscape / Neutral / Faithful / Monochrome / User Def.
Menu Operations 4 Playback 2 (Blue) Page Highlight alert Disabled / Enabled 118 AF point disp. Disabled / Enabled 118 Histogram Brightness / RGB 118 Enlarge display Enlarge from image center / Enlarge from selected AF point 120 Image jump w/6 1 image / 10 images / 100 images / Screen / Date / Folder 119 Auto power off 1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Off 47 [Record func.] Standard / Auto switch media / Rec. separately / Rec.
Menu Operations 7 Set-up 3 (Yellow) Page Save/load settings on media Save / Load 182 Regist/apply basic settings Register / Apply 184 Clear all camera settings Resets the camera to the default settings 49 Sensor cleaning Auto cleaning / Clean now / Clean manually 131 Firmware Ver. For updating the firmware - WFT settings Displayed when WFT-E2 II A/B/C/D or WFT-E2/A (sold separately) is attached - 8 Custom Functions (Orange) C.Fn I: Exposure 158 C.Fn II: Image/Flash exp/Disp 163 C.
Before You Start 3 Setting the Interface Language 1 Select [Language]. Under the [6] tab, select [Language] (the third item from the top), then press <0>. the desired language. 2 SetTurn the <5> dial to select the language, then press <0>. X The language will change. 3 Setting the Date and Time Y P O Check if the camera’s date and time are set correctly. If necessary, set the correct date and time. 1 Select [Date/Time]. C 2 Under the [6] tab, select [Date/ Time], then press <0>.
Before You Start 3 Set the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a certain time of non-operation. You can change this auto power-off time. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button. 1 Select [Auto power off]. Under the [5] tab, select [Auto power off], then press <0>. the desired time.
Before You Start the memory card. 2 Select [f] is the CF card, and [g] is the SD card. Turn the <5> dial to select the card, then press <0>. [OK]. 3 Select When [g] is selected, low-level formatting is possible. (p.49) Turn the <5> dial to select [OK], then press <0>. X The memory card will be formatted. X When the formatting is completed, the menu will reappear. C Y P O When the memory card is formatted or erased, only the file management information is changed.
Before You Start About Low-level Formatting When [g] SD card is selected, low-level formatting is possible. If the writing speed to the SD card is slower than usual or if you want to completely erase the data in the SD card, checkmark [Low level format] and format the card. Press the button. In step 3 on the preceding page, press the button. X The [Low level format] option will be checkmarked . With displayed, select [OK] to start the low-level formatting.
Before You Start Setting [Clear all camera settings] will reset the camera to the following default settings: Shooting Settings Image-Recording Settings Shooting mode P (Program AE) Record func.
2 Image Settings Y P O This chapter explains the settings for shooting digital images: Image-recording quality, ISO speed, Picture Styles, white balance, and color space. C When the camera is ready to shoot, you can press the button to see the image settings. (p.
Setting the Image-recording Quality You can set the image size (recorded pixels), image type (JPEG, RAW, sRAW), and JPEG quality (compression rate). Selecting the Image Size 3/4/5/6 will record the image in the JPEG. In the 1/9 mode, the image will require processing with the software provided. 9 is a small RAW image which is one-fourth (approx. 5.2 megapixels) the size of a normal RAW image. Also, RAW/sRAW and JPEG images can be recorded at the same time on the memory card. 1 Press the button.
Setting the Image-recording Quality You can also use the [2 Image size] menu to set the image size. For simultaneous image recording, the RAW or sRAW image and the JPEG image will be recorded with the same file number in the same folder. If the [5 Record func+media/folder sel.] menu’s [Record func.] is set to [Rec. separately], you can set the image size (except for 1+JPEG and 9+JPEG) for the respective card.
Setting the Image-recording Quality About RAW The RAW image is the data output by the image sensor and converted to digital data which is recorded on the memory card as is. The RAW image is transferred to a personal computer where software (provided) is used to adjust the image as needed. From the RAW image, the software can develop and generate the adjusted image in the desired type such as JPEG or TIFF. About sRAW This is a small RAW image which is one-fourth (approx. 5.
Setting the Image-recording Quality If the viewfinder displays “99” for the maximum burst, it means the maximum burst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 or lower. If you stop the continuous shooting, the maximum burst will increase. After all the captured images are written to the memory card, the maximum burst will be as listed on page 53. 3 Setting the JPEG Quality (Compression Rate) The image-recording quality (compression rate) can be set for each image size 3/4/5/6.
Z: Setting the ISO Speed The ISO speed is a numeric indication of the sensitivity to light. A higher ISO speed number indicates a higher sensitivity to light. Therefore, a high ISO speed is suited for low light and moving subjects. However, the image may look more coarse with noise, etc. On the other hand, a low ISO speed is not suited for low light or action shots, but the image will look finer. The camera can be set between ISO 100 and 1600 in 1/3-stop increments. 1 Press the button.
A Selecting a Picture Style By selecting a Picture Style, you can obtain the desired image effects matching your photographic expression or the subject. 1 Press the button. When the camera is ready to shoot, press the button. X The Picture Style screen will appear. a Picture Style. 2 Select Turn the <5> dial to select a Picture Style, then press <0>. X The Picture Style will take effect and the camera will be ready to shoot.
A Selecting a Picture Style Monochrome For black-and-white images. To obtain natural-looking, black-and-white images, set a suitable white balance. With JPEG 3/4/5/6 images, color cannot be restored to the black-and-white image. Do not use this Picture Style if you want color JPEG images. When [Monochrome] is selected, <0> will appear on the rear LCD panel. User Def. 1-3 You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def.
A Customizing the Picture Style You can customize the Picture Style by adjusting the individual parameters like [Sharpness] and [Contrast]. To customize [Monochrome], see the next page. 1 Press the button. a Picture Style. 2 Select Turn the <5> dial to select a Picture Style, then press the button. a parameter. 3 Select Turn the <5> dial to select a parameter, then press <0>. Y P 4 CO Set the parameter. Turn the <5> dial to set the parameter as desired, then press <0>.
A Customizing the Picture Style By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameters. To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the Picture Style and then shoot. Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast].
A Registering the Picture Style You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameters such as sharpness and contrast are different. You can also select a Picture Style already set with the provided software. 1 Press the button. [User Def.]. 2 Select Turn the <5> dial to select [User Def. *], then press the button. Y P O <0>.
A Registering the Picture Style the parameter. 6 SetTurn the <5> dial to set the parameter as desired, then press <0>. Press the button to register the new Picture Style. The Picture Style selection screen will then reappear. X The base Picture Style will be displayed on the right of [User Def. *]. X The name of the Picture Style having any modified settings (different from the default) registered under [User Def. *] will be displayed in blue.
Selecting the White Balance White balance (WB) is for making the white areas look white. Normally, the (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with , you can set the white balance manually to suit the respective light source. 1 Press the button. (9) Press the button once or twice to display the white balance on the rear LCD panel’s upper right. WB z Card/Image size the white balance.
O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Up to five Custom white balance data can be registered to the camera. You can also append a name (caption) to the registered Custom white balance data. 3 Registering Custom WB There are two ways to register Custom white balance data. You can either take a picture and register it, or register an image already saved in the memory card.
O Custom White Balance a solid-white object. 4 Photograph The plain, white object should fill the center spot metering circle. Set the lens focus mode switch to , then focus manually. (p.86) Shoot the white object so that a standard exposure (gray) is obtained. If it is underexposed or overexposed, a correct white balance setting might not be obtained. X The Custom WB data will be registered in the camera. When it is completed, a message will appear on the screen.
O Custom White Balance [Register image on card] First follow step 4 under [Record and register image] to take a picture of a plain, white object. This image saved in the memory card can then be registered for Custom WB. The procedure up to step 2 is the same as with [Record and register image]. 1 Select [Custom WB regist.]. the Custom WB No. to be 2 Select registered. [Register image on card]. 3 Select Turn the <5> dial to select [Register image on card], then press <0>.
O Custom White Balance 3 Selecting and Shooting with the Custom WB data You can shoot with the registered Custom WB data. Registered images 1 Select the registered Custom WB No. On the Custom WB registration screen, select the No. of the registered Custom WB. [Set as white balance]. 2 Select Turn the <5> dial to select [Set as white balance], then press <0>. X The WB will be set to the registered . Y P O the picture. 3 Take X The picture will be taken with the C setting.
O Custom White Balance [Edit caption]. 2 Select Turn the <5> dial to select [Edit caption], then press <0>. any name. 3 Enter Press the button, and the text palette will be highlighted in a color frame and text can be entered. Operate the <5> dial or <9> to move the and select the desired character. Then press <0> to enter it. You can enter up to 20 characters. To change the name, first delete the unnecessary characters.
Setting the Color Temperature You can numerically set the white balance’s color temperature. 1 Press the button. (9) Press the button once or twice to display the white balance on the rear LCD panel’s upper right. WB z Card/Image size
. 2 Select Turn the <5> dial to select
. the desired value. 3 SetTurn the <6> dial to set the color temperature. You can set it within 2500K to 10000K in 100K increments.
3 White Balance Correction You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. Users familiar with using color temperature conversion or color compensating filters will find this feature handy. White Balance Correction 1 Select [WB SHIFT/BKT]. Under the [1] tab, select [WB SHIFT/BKT], then press <0>.
3 White Balance Correction White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
3 Setting the Color Space The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal images, sRGB is recommended. 1 Select [Color space]. Under the [1] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>. About Adobe RGB Y P O This is mainly used for commercial printing and other industrial uses.
Selecting the Media, Folder, and Recording Method This Instruction Manual assumes that a CF card or SD card is in the camera. When an external media is used via the Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/A (sold separately), the icon will appear as the third recording media. It can be selected in the same way as with the CF card and SD card .
Selecting the Media, Folder, and Recording Method 3 Setting the Recording Method You can set how the image is recorded to the memory card. 1 Select [Record func+media/folder sel.]. Under the [5] tab, select [Record func+media/folder sel.], then press <0>. [Record func.]. 2 Select Turn the <5> dial to select [Record func.], then press <0>. Y P O the recording method. 3 Select Turn the <5> dial to select the recording method, then press <0>.
Selecting the Media, Folder, and Recording Method When [Auto switch media] is set, the card for recording will switch from f to g. When [Rec. separately] or [Rec. to multiple] is set, the image will be recorded under the same file number in both the CF and SD cards. The number of shots remaining displayed on the top LCD panel and in the viewfinder is based on the card with fewer remaining shots than the other card.
Selecting the Media, Folder, and Recording Method About Folders As with “100EOS1D” for example, the folder name starts with three digits (folder number) followed by five characters. A folder can contain up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new folder with a higher one-up folder number is created automatically. Also, if manual reset (p.80) is executed, a new folder will be created automatically. Folders numbered from 100 to 999 can be created.
3 Changing the File Name The file name has four alphanumeric characters followed by a four-digit image number (p.79) and (Ex.) 7E3B0001.JPG extension. The first four alphanumeric characters are set upon factory shipment and unique to the camera. However, you can change it. With “User setting1,” you can change and register the four characters as desired. With “User setting2,” if you register three characters, the fourth character from the left will be appended automatically to indicate the image size.
3 Changing the File Name Operate the <5> dial or <9> to move the and select the desired character. Then press <0> to enter it. Enter the required number of alphanumeric characters, then press the button. X The new file name will be registered and the screen in step 2 will reappear. the registered file name. 4 Select Turn the <5> dial to select [File Settings name], then press <0>. Turn the <5> dial to select the registered file name.
3 File Numbering Methods The 4-digit file number is like the frame number on a roll of film. The captured images are (Ex.) 7E3B0001.JPG assigned a sequential file number from 0001 to 9999 and saved to one folder. You can also change how the file number is assigned. 1 Select [File numbering]. Under the [5] tab, select [File numbering], then press <0>. the file numbering method. 2 Select Turn the <5> dial to select the desired method, then press <0>.
3 File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the memory card is replaced or a new folder is created. Whenever the memory card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to memory cards or folders.
3 Setting the AF and Drive Modes Y P O The Area AF has 45 AF points (19 high-precision cross-type points and 26 Assist AF points). You can select any one of the 19 cross-type points to match your composition. C You can also select the AF mode to match the shooting conditions and subject and select the best drive mode. stands for auto focus. stands for manual focus.
E: Selecting the AF Mode Select the AF mode suiting the shooting conditions or subject. 1 On the lens, set the focus mode switch to . the button. 2 Press (9) the AF mode. 3 Select Turn the <6> dial to select the AF mode. ZzX Y P O One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once.
E: Selecting the AF Mode If focus cannot be achieved, the focus confirmation light in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try and focus again. Or see “When Autofocus Fails” (p.86). If the [2 Beep] menu is set to [Off], the beeper will not sound when focus is achieved. Focus Lock After achieving focus with One-Shot AF, you can lock the focus on a subject and recompose the shot.
S Selecting the AF Point Automatic AF Point Selection From among the 45 AF points, the camera selects the AF point automatically to suit the shooting conditions. Manual AF Point Selection You can manually select any of the 19 cross-type AF points. This is best when you want to focus the target subject at will, or autofocus quickly while composing the shot. the button. (9) 1 Press X The current AF point will light in the viewfinder. the AF point.
S Selecting the AF Point Lens’ Maximum Aperture and AF Sensitivity The EOS-1Ds Mark III can execute high-precision AF with lenses whose maximum aperture is f/2.8 or larger. With f/2.8 and faster lenses* Assist AF points Cross-type points With the 19 AF points indicated by , high-precision, cross-type AF (both horizontal- and vertical-line sensitive) is possible. With cross-type AF, vertical-line detection is about 2 times as sensitive as horizontal-line detection.
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects such as the following: Subjects difficult to focus Low-contrast subjects Example: Blue sky, solid-color walls, etc. Subjects in low light Extremely backlit and reflective subjects Example: Car with a reflective body, etc. Overlapping near and far objects Example: Animal in a cage, etc. Repetitive patterns Example: Skyscraper windows, computer keyboards, etc.
R: Selecting the Drive Mode 1 Press the button. (9) the drive mode. 2 Select While looking at the top LCD panel, turn the <5> dial. C u : Single shooting When you press the shutter button completely, one shot will be taken. o: High-speed continuous shooting (Max. 5 shots per sec.) p: Low-speed continuous shooting (Max. 3 shots per sec.) In the o and p modes, the camera will shoot continuously while you hold down the shutter button completely. k : Self-timer (10-sec. delay) l : Self-timer (2-sec.
j Self-timer Operation the button. 1 Press (9) either or . 2 Select Look at the top LCD panel and turn the <5> dial to select or . k : 10-sec. self-timer l : 2-sec. self-timer the picture. 3 TakeFocus the subject and press the shutter button completely. X The self-timer lamp will blink, and 10 sec. or 2 sec. later, the picture will be taken. X During the self-timer operation, the top LCD panel counts down the seconds until the picture is taken.
4 Exposure Control Y P O Select the shooting mode to suit the subject or shooting objective. You can set the shutter speed and/or aperture to obtain the exposure you want. Also, with an EX-series Speedlite, you can take flash pictures as easily as normal shooting without flash. C First set the power switch to .
q Metering Modes 1 Press the button. (9) the metering mode. 2 Select While looking at the top LCD panel, turn the <6> dial. q: Evaluative metering w: Partial metering r: Spot metering e: Center-weighted average metering q Evaluative metering This is the camera’s standard metering mode suited for most subjects even under backlit conditions.
q Metering Modes e Center-weighted average metering The metering is weighted at the center and then averaged for the entire scene. Multi-Spot Metering With multiple spot meter readings, you can see the relative exposure levels of multiple areas in the picture and set the exposure to obtain the desired result. 1 Set the metering mode to r spot metering. 2 Press the button. (8) Y P O Aim the spot metering circle over the area where you want a relative exposure reading, then press the button.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Press the button. (9) . 2 Select Turn the <6/5> dial to select . Y P O the subject. 3 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.
d: Program AE the picture. 5 TakeCompose the shot and press the shutter button completely. Y P O If “30"” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Fast shutter speed 1 Y P O Slow shutter speed Select .
s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Y P O Shutter Speed Display The shutter speeds from “8000” to “4” indicate the denominator of the fractional shutter speed.
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (smaller f/number) until the blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (larger f/number) until the blinking stops or set a lower ISO speed. Y P O Aperture Display The larger the f/number, the smaller the aperture opening will be.
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available handheld exposure meter. This method is called manual exposure. * stands for Manual. 1 Select . Press the button and turn the <6/5> dial to select . the desired shutter speed. 2 SetWhile looking at the top LCD panel, turn the <6> dial. Y P O the desired aperture.
O Exposure Compensation Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±3 stops in 1/3-stop increments. 1 Check the exposure level indicator. Press the shutter button halfway and check the exposure level indicator. Increased exposure Decreased exposure the exposure compensation 2 Set amount. Make sure the power switch is set to .
h Auto Exposure Bracketing (AEB) By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Hold down the and buttons simultaneously. (9) X The icon and “0.0” will appear on the top LCD panel. the AEB amount. 2 SetTurn the <6/5> dial to set the AEB amount. “1.0” is the AEB increment, and is the AEB amount. Y P O picture.
A AE Lock Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button.
Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Select “buLb”. Press the button and turn the <6/5> dial to select “buLb”. the desired aperture. 2 SetWhile looking at the top LCD panel, turn the <6/5> dial. c d e 3 Take the picture.
Bulb Exposures Eyepiece Shutter If your eye is not looking at the viewfinder, stray light entering the eyepiece can adversely affect the exposure. To prevent this, slide the eyepiece shutter lever as shown by the arrow to shutter the eyepiece. Connecting the Remote Switch You can connect Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it.
Mirror Lockup Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups. When C.Fn III -15 [Mirror lockup] is set to [1:Enable] or [2:Enable: Down with SET] (p.172), shooting with mirror lockup is possible. 1 Focus the subject, press the shutter button completely and release it. X The mirror will lockup and <2> will blink on the top LCD panel.
Flash Photography Using an EX-series Speedlite An EX-series Speedlite (sold separately) makes flash photography as easy as normal shooting without flash. You can easily do the flash operations below. For detailed instructions, see the EX-series Speedlite’s instruction manual.
Flash Photography 3 Flash Function Settings and Flash Custom Functions When an EX-series Speedlite (such as the 580EX II) controllable by the camera is attached, you can use the camera’s menu screen to set the Speedlite’s flash function settings such as the flash mode, FEB, and 1st or 2nd curtain sync, and wireless flash. Flash Custom Functions can also be enabled or disabled. Turn on the Speedlite before setting its functions.
Flash Photography Metered Manual Flash Exposure This is for close-up flash photography when you want to set the flash level manually. Use an 18% gray card and an EX-series Speedlite which has manual flash mode. Follow the instructions below: 1. Set the camera and Speedlite settings. • Set the camera’s shooting mode or . • Set the Speedlite to manual flash mode. 2. Focus the subject. • Focus manually. 3. Set up the 18% gray card. • Place the gray card at the subject’s position.
Flash Photography Using Non-EX-series Canon Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to manual or aperture-priority AE and shoot. When using a Speedlite which has manual flash mode, shoot in the manual flash mode. With an EX-series Speedlite set to TTL autoflash with the flash’s Custom Function, the flash will fire at full output only.
5 Live View Shooting Y P O You can shoot while viewing a real-time image on the camera’s LCD monitor or on a personal computer screen. This is called “Live View shooting.” C Using a hard disk-type card is not recommended. Use a memory card. When you use Live View shooting for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images.
Live View Shooting Instead of looking through the viewfinder, you can look at a real-time image on the camera’s LCD monitor while shooting. You can also magnify the real-time image on the LCD monitor by 5x or 10x so you can focus more precisely. Convenient when the camera is mounted on a tripod for shooting still lifes, for example. Preparing for Live View Shooting 1 Set the lens focus mode switch to . During Live View shooting, autofocusing is not possible. [Live View function 2 Select settings].
Live View Shooting Displaying Live View Image on the LCD Monitor With the camera ready to shoot, press <0>. X The Live View image will appear on the LCD monitor in real-time with 100% field of view. With the video cable (provided) connecting the camera to a TV set, you can view images on the TV. (p.122) During Live View image display, if you point the camera in a different direction, it might throw off the correct brightness momentarily and the image might not look right.
Live View Shooting Magnifying the Image for Manual Focusing 1 Move the focusing frame to the position where you want to focus. Use <9> to select the focusing frame in full view. If you press <9> at the center, the focusing frame will return to the center. the button. 2 Press X The area within the focusing frame Magnification: Approx. 10x will be magnified. X The shutter speed and aperture settings will be displayed in orange.
Live View Shooting Taking the Picture 1 Check the composition. Press the to check the image composition in full view. 2 Check the display. the picture. 3 TakePress the shutter button completely. X The picture will be taken and the captured image is displayed on the LCD monitor. X After the image review ends, the camera will return to Live View shooting automatically. To terminate shooting, press <0> while Live View image is displayed.
Live View Shooting About the Information Display Each time you press the button, the information display will change. Histogram (Brightness/RGB) Live View exposure simulation Focusing frame Battery check Exposure level Picture Style AE lock ISO speed Flash-ready Shutter speed Aperture Shots remaining Flash exposure level Y P O When the [6 Live View function settings] menu’s [Grid display] is set to [On], a grid will appear to make it easier to align the horizontal or vertical shot.
6 Image Playback Y P O Learn how to view or erase images, and copy images between the CF card and SD card. C For images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.
x Image Playback Single image display 1 Playback the image. Press the button. X The last captured image or last image viewed will appear. the image. 2 Select To playback images starting with the last image, turn the <5> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise. Press the button to change the display format.
x Image Playback Shooting Information Display Single image display + Image size Protect Exposure compensation amount Aperture Sound recording Folder number - File number Memory card Shutter speed Image-recording quality Playback image number/ Total images recorded Y P O Shooting Information Display C Flash exposure compensation amount White balance correction Picture Style AF microadjustment Metering mode Histogram (Brightness/RGB) Shooting mode Color temperature if
is set ISO speed Picture
x Image Playback About the Highlight Alert When the [4 Highlight alert] menu is set to [Enable], overexposed highlight areas will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the AF Point Display When the [4 AF point disp.] menu is set to [Enable], the AF point which achieved focus will be displayed in red in the shooting information display and histogram display.
x Image Playback Index Display 1 Turn on the index display. During image playback, press the button. X The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. Press the button again to switch to the 9-image index display. an image. 2 Select Turn the <5> dial to move the blue frame. To display an image, press the button.
x Image Playback u/y Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. 1 Magnified area Magnify the image. During image playback, press the button. X The image will be magnified. To increase the magnification, hold down the button. The image will continue to be magnified until it reaches the maximum magnification. To reduce the magnification, press the button. If you hold down the button, the image will continue to reduce to the single image display.
x Image Playback b Rotating an Image You can rotate the image to the desired orientation. 1 Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. the image. 2 Select Turn the <5> dial to select the image to be rotated. You can also select an image on the index display. Y P O the image. 3 Rotate Each time you press <0>, the image C will rotate clockwise as follows: 90° → 270° → 0° To rotate other images, repeat steps 2 and 3.
x Image Playback Viewing the Images on TV By connecting the camera to a TV set with the video cable (provided), you can view the captured images on a TV set. Turn off the camera and the television before connecting them. 1 Connect the camera to the TV. Open the camera’s terminal cover. Use the video cable (provided) to connect the camera’s video OUT terminal to the TV monitor’s VIDEO IN terminal. Insert the video cable plugs firmly all the way.
J Protecting Images Protecting the image prevents it from being erased accidentally. Protecting a Single Image the image to be 1 Playback protected. the image. 2 Protect During image playback, press the button. X When an image is protected, the icon will appear above the image. To cancel the image protection, press the button again. The icon will disappear. To protect another image, repeat steps 1 and 2. C Y P O To exit the image protection, press the button. The menu will reappear.
J Protecting Images Images can also be protected individually when the [3 Protect images] menu is set to [Select images]. Press <0> to protect or unprotect the image. Once an image is protected, it cannot be erased by the camera’s erase function. To erase a protected image, you must first cancel the protection. If you erase all the images (p.128), only the protected images will remain. This is convenient when you want to erase unnecessary images all at once.
a Copying Images The images in a memory card can be copied to the other memory card. 3 Copying Individual Images 1 Select [Image copy]. Under the [3] tab, select [Image copy], then press <0>. [Sel.Image]. 2 Select Turn the <5> dial to select [Sel.Image], then press <0>. Lowest file number Quantity of images in folder Y P 3 O C Select the folder. Turn the <5> dial to select the folder containing the image to be copied, then press <0>.
a Copying Images Total images selected the image. 4 Select Turn the <5> dial to select the image to be copied, then press <0>. X The icon will appear on the upper left of the screen. Press the button to display the three-image view. To return to the singleimage display, press the button. To select another image to be copied, repeat step 4. the button. 5 Press After selecting all the images to be copied, press the button. Y P O [OK].
a Copying Images X The copying will start and the progress will be displayed. When the copying is completed, the result will be displayed. Select [OK] to return to the screen in step 2. 3 Copying All Images in a Folder In step 2, select [Sel.n]. Select the source folder to be copied, then the target folder. 3 Copying All Images in a Memory Card Y P O In step 2, select [All image]. All the folders and images in the source memory card will be copied to the target card.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.123) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a Single Image 1 Playback the image to be erased. the button. 2 Press The erase menu will appear at the bottom of the screen. Y P O the image.
Changing Image Playback Settings 3 Setting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. 1 Select [LCD brightness]. Under the [6] tab, select [LCD brightness], then press <0>. the brightness. 2 Adjust While referring to the gray chart, turn the <5> dial, then press <0>. Y P O To check the image’s exposure, you should look at the histogram (p.118).
Changing Image Playback Settings 3 Auto Rotate of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed. 1 Select [Auto rotate]. Under the [5] tab, select [Auto rotate], then press <0>. the auto rotate display. 2 SetTurn the <5> dial to select the Y P O setting, then press <0>.
7 Sensor Cleaning Y P O The camera has a Self Cleaning Sensor Unit attached to the sensor’s front layer (low-pass filter) to shake off dust automatically. The Dust Delete Data can also be appended to the image so that any remaining dust spots can be removed automatically by the Digital Photo Professional (provided software).
3 Automatic Sensor Cleaning Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates (approx. 3.5 sec.) to automatically shake off any dust on the front of the sensor. Normally, you need not be aware of this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [7] tab, select [Sensor cleaning], then press <0>. [Clean nowf].
3 Appending Dust Delete Data Normally, the Self Cleaning Sensor Unit will eliminate most of the dust visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by the Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer.
3 Appending Dust Delete Data a solid-white object. 3 Photograph At a distance of 20 - 30 cm / 0.7 - 1.0 feet, fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperture-priority AE mode with an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no memory card in the camera. X When the picture is taken, the data will be obtained. When the data is obtained, a message will appear.
3 Manual Sensor Cleaning Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Sensor cleaning]. Under the [7] tab, select [Sensor cleaning], then press <0>. [Clean manually].
3 Manual Sensor Cleaning While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Set the power switch to <2>. • Remove/insert the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor. Do not insert the blower tip inside the camera beyond the lens mount.
8 Direct Printing from the Camera/ Digital Print Order Format Y P O You can connect the camera directly to a printer and print out the images in the memory card. The camera is compatible with “wPictBridge” which is the standard for direct printing. C You can also specify any images in the memory card to be printed. (p.147) About DPOF DPOF (Digital Print Order Format) is a standard for recording printing instructions (image selections, quantity to print, etc.) in the memory card.
Preparing to Print You do the direct printing procedure entirely with your camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. Y P O the camera to the 3 Connect printer. Use the interface cable that came with the camera. When connecting the cable plug to the camera’s terminal, the cable plug’s icon must face the front side of the camera.
Preparing to Print wPictBridge the image. 6 Playback Press the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. C Y P O The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. When connecting the camera to the printer, do not use any cable other than the interface cable provided. If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer.
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Turn the <5> dial to select the image to be printed. <0>. 2 Press X The print setting screen will appear. Print setting screen Sets the printing effects.
wPrinting QSetting the Paper Size Turn the <5> dial to select the size of the paper loaded in the printer, then press <0>. X The paper type screen will appear. YSetting the Paper Type Turn the <5> dial to select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used. X The page layout screen will appear.
wPrinting effects. 4 SetSettheasprinting necessary. If you need not set any printing effects, go to step 5. Turn the <5> dial to select the item on the upper right, then press <0>. If the icon is displayed next to , the printing effects can also be adjusted. (p.144) Next, turn the <5> dial to select the desired printing effect, then press <0>. Item Description EOff Same as the printing characteristics turned “On”. No automatic correction will be performed.
wPrinting the date and file number 5 Set imprinting. Set as necessary. Turn the <5> dial to select , then press <0>. Turn the <5> dial to select the desired setting, then press <0>. of copies. 6 SetSettheasnumber necessary. Turn the <5> dial to select , then press <0>. Turn the <5> dial to select the number of copies, then press <0>. Y P O 7 StartTurnprinting. the <5> dial to select [Print], then press <0>. X The printing will start. C You can also print RAW and sRAW images taken by the camera.
wPrinting e Adjustment of Printing Effects In step 4 on page 142, select the printing effect. When the icon is displayed next to , press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and proportion. The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) Set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Set the Printing Options 1 Select [Print order]. X Under the [3] tab, select [Print order], then press <0>. [Set up]. 2 Select Turn the <5> dial to select [Set up], Y P O then press <0>. C3 Set the options as desired. [Print type] Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Print type K Standard Prints one image on one sheet. L Index Multiple, thumbnail images are printed on one sheet. K L Both Prints both the standard and index prints. On Date Off File No. On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. 4 Exit the menu. Press the <7> button. X The Print order screen will reappear. Y P O Next, select [Sel.Image], [Byn], or [All image] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. Press the button to display the three-image view. To return to the singleimage display, press the button. After completing the print order, press the button to save the print order to the memory card. Quantity Check mark Total images selected [Standard] [Both] Press <0> and a print order for 1 copy of the displayed image will be placed.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Preparing to print. See page 138. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. [Print] will be displayed only if the camera is connected to the printer and printing is possible. Y P O 4 Set the [Paper settings]. (p.140) Set the printing effects (p.142) as necessary. 5 Select [OK].
9 Transferring Images to a Personal Computer Y P O You can use the camera to select images in the memory card and transfer them directly to a personal computer. If the computer software (EOS DIGITAL Solution Disk CD-ROM) provided with the camera has been installed in your personal computer, you can easily transfer the images without operating the personal computer. C For instructions to install the provided software, see the separate sheet, CD-ROM Guide.
d Transferring Images to a Personal Computer Before connecting the camera to the personal computer, be sure to first install the EOS DIGITAL Solution Disk software (in the CD-ROM provided with the camera) in the personal computer. Preparation for Image Transfer 1 Connect the camera to the personal computer. Set the camera’s power switch to <2>. Use the interface cable that came with the camera.
d Transferring Images to a Personal Computer Transferring Images to a Personal Computer The images transferred to the personal computer will be organized according to the shooting date and saved in the [My Pictures] folder for Windows or the [Pictures] folder in the Macintosh. All images All the images in the memory card will be transferred. New images Images which have not yet been transferred to the personal computer will be selected by the camera automatically and transferred.
d Transferring Images to a Personal Computer 3 Selecting the Images to be Transferred Under the [3] tab, you can use [Transfer order] to select the images to be transferred to a personal computer. When you select [Transfer order images] on the preceding page, you can transfer the images set by the transfer order. Sel.Image Select and order images one by one. Press <0> to include the displayed image in the transfer order. The icon will also appear on the upper left.
10 Customizing the Camera and Saving Camera Settings Y P O To suit your shooting preferences, you can change the camera’s functions and also save the camera settings to a memory card. The saved settings can also be registered to the camera.
3 Setting Custom Functions 1 Select [8]. Turn the <6> dial to select the [8] tab. the group. 2 Select Turn the <5> dial to select C.Fn I IV, then press <0>. Custom Function No. 3 Select the Custom Function No. 4 Change the setting as desired. Turn the <5> dial to select the Custom Function No., then press <0>. Y P O Turn the <5> dial to select the setting (number), then press <0>. Repeat steps 2 to 4 if you want to set other Custom Functions.
3 Setting Custom Functions Custom Functions C.Fn I: Exposure C.
3 Custom Function Settings The Custom Functions are organized in four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image/Flash exp (exposure)/ Disp (Display), C.Fn III: Auto focus/Drive, C.Fn IV: Operation/Others. Note that the Custom Function numbers differ from previous EOS-1Ds-series cameras. C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop set 1/3-stop compensation 1: 1-stop set 1/3-stop compensation Sets full-stop increments for the shutter speed and aperture.
3 Custom Function Settings C.Fn I -4 Bracketing auto cancel 0: On The AEB and WB-BKT settings will be canceled when the power switch is set to <2> or the camera settings are cleared. AEB will also be canceled when bulb exposure is set or the flash is ready to fire. 1: Off The AEB and WB-BKT settings will be retained even when the power switch is set to <2>. (When the flash is ready, AEB will be canceled. However, the AEB amount will be retained in memory.) C.
3 Custom Function Settings C.Fn I -7 Spot metering link to AF point 0: Disable (use center AF point) 1: Enable (use active AF point) Enables spot metering linked to the selected AF point. With automatic AF point selection, spot metering will be at the viewfinder center. C.Fn I -8 Safety shift 0: Disable 1: Enable (Tv/Av) This works in the shutter-priority AE (Tv) and aperture-priority AE (Av) modes.
3 Custom Function Settings C.Fn I -10 Select usable metering modes Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot, e: Center-weighted average) will be selectable. Enable: Only the metering modes set with [Register] will be selectable. Register: To make a metering mode unselectable, uncheck the checkmark . After entering the settings, select [Apply]. C.Fn I -11 Exposure mode in manual exposure You can set the metering mode to be used in the manual exposure mode.
3 Custom Function Settings C.Fn I -14 Apply shooting/metering mode While holding down the (AE lock) button, you can switch to the registered setting (shooting mode, metering mode, shutter speed, aperture, or exposure compensation). Disable: Pressing the button will lock the exposure (AE lock). Enable: By holding down the button, you can instantly switch to the registered setting.
3 Custom Function Settings C.Fn II: Image/Flash exposure/Display C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
3 Custom Function Settings C.Fn II -3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, noise in the shadow areas may be slightly more than usual. With setting 1, the settable ISO speed range will be 200 - 1600.
3 Custom Function Settings C.Fn II -6 Flash firing Enables or disables the firing of an external flash or non-Canon flash connected to the PC terminal. 0: Enable 1: Disable Convenient when you want to use the external flash’s AF-assist beam only. Note that whether or not the AF-assist beam is emitted is dependent on the C.Fn III -14 setting. C.Fn II -7 Viewfinder info. during exposure 0: Disable 1: Enable The viewfinder information will be displayed even during an exposure.
3 Custom Function Settings C.Fn III: Auto focus/Drive C.Fn III -1 USM lens electronic MF USM lens electronic MF can be enabled or disabled for when you use any of the following lenses. EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF85mm f/1.2L II USM, EF200mm f/1.8L USM, EF300mm f/2.8L USM, EF400mm f/2.8L USM, EF400mm f/2.8L II USM, EF500mm f/4.5L USM, EF600mm f/4L USM, EF1200mm f/5.6L USM, or EF28-80mm f/2.8-4L USM 0: Enable after One-Shot AF After focus is achieved in One-Shot AF, electronic MF is enabled.
3 Custom Function Settings 1: AF priority/Drive speed priority For the first shot, focusing the subject is given priority. During continuous shooting, the continuous shooting speed is given priority over the focustracking of the subject. 2: Release/Drive speed priority For the first shot, shutter release is given priority over focusing the subject. During continuous shooting, the continuous shooting speed is given priority more than with setting 1. C.
3 Custom Function Settings C.Fn III -6 Lens AF stop button function 0: AF stop 1: AF start AF operates only while the button is pressed. While the button is pressed, AF operation with the camera is disabled. 2: AE lock When the button is pressed, AE lock is applied. Convenient when you want to focus and meter at different parts of the picture.
3 Custom Function Settings C.Fn III -7 AF Microadjustment Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved. You can make fine adjustments of the AF’s point of focus. It can be adjusted in ±20 steps (-: Forward / +: Backward). The adjustment amount of one step varies depending on the maximum aperture of the lens. Adjust, shoot, and check the focus. Repeat to adjust the AF’s point of focus.
3 Custom Function Settings C.Fn III -8 AF expansion with selected point In the AI Servo AF or One-Shot AF mode with manual AF point selection, you can increase the number of AF points by using the Assist AF points. Effective when it is difficult to track a moving subject with just one AF point. 0: Disable 1: Enable (left/right Assist AF points) The points on the immediate left and right (or top and bottom for a vertical shot) of the user-selected AF point become active.
3 Custom Function Settings C.Fn III -10 Switch to registered AF point You can instantly switch to the registered AF point with <9> while the metering timer is active. (AF is activated at the moment when AF point is switched.) 0: Disable 1: Enable By pressing <9>, you can switch to the registered AF point. Press it again to switch to the previous AF point. Registering the AF point (Multiple AF points cannot be registered.) You can register an AF point you use frequently. 1.
3 Custom Function Settings C.Fn III -13 AF point brightness 0: Normal 1: Brighter C.Fn III -14 AF-assist beam firing Enables or disables the EOS-dedicated Speedlite’s AF-assist beam. 0: Enable The external Speedlite will emit the AF-assist beam when necessary. 1: Disable The external Speedlite’s Custom Function [AF-assist beam firing] set to [Disable] will override this Custom Function’s 0 setting. C.Fn III -15 Mirror lockup Y P O See page 104 for the mirror lockup procedure.
3 Custom Function Settings C.Fn IV: Operation/Others C.Fn IV -1 Shutter button/AF-ON button 0: Metering + AF start 1: Metering + AF start/AF stop During autofocusing, you can press the
button to stop the autofocusing. 2: Metering start/Meter + AF start This is useful for subjects which keep moving and stopping repeatedly. In the AI Servo AF mode, you can press the
button to repeatedly start or stop the AI Servo AF operation. The exposure is set at the moment the picture is taken.
3 Custom Function Settings C.Fn IV -4 SET button when shooting You can assign a frequently-used function to <0>. When the camera is ready to shoot, you can press <0>. 0: Normal (disabled) 1: White balance While looking at the rear LCD panel, you can change the WB. 2: Image size While looking at the rear LCD panel, you can change the memory card and image size. 3: ISO speed While looking at the top LCD panel or in the viewfinder, you can change the ISO speed.
3 Custom Function Settings C.Fn IV -6 Dial direction during Tv/Av 0: Normal 1: Reverse direction The dial’s turning direction for setting the shutter speed and aperture can be reversed. In the manual exposure mode, the direction of the <6> and <5> dials will be reversed. In other shooting modes, the <6> dial will be reversed. The direction of the <5> dial will be the same in the manual exposure mode and for setting exposure compensation. C.
3 Custom Function Settings C.Fn IV -10 Button function when 5 0: Normal (enable) 1: Disable 6,5,Multi-controller When the power switch is set to <1>, the <6>, <5>, and <9> will be disabled from setting anything. The shutter button can still be used to shoot. This prevents any settings to be changed inadvertently, so it is convenient when you keep shooting with the same settings. Even with setting 1, if the power switch is set to , you can use <6>, <5>, and <9> to change settings. C.
3 Custom Function Settings C.Fn IV -12 Timer length for timer You can change how long the function settings remain in effect after you let go of the respective button. Disable: The timer length is set to the default. Enable: The timer length is set to the time set with [Register]. Register: You can set the 6-sec. and 16-sec. timer length and the timer length for after the shutter release. The timer length can be set to 0 sec. to 59 sec. or 1 min. to 60 min. After entering the settings, select [Apply].
3 Custom Function Settings C.Fn IV -14 Add aspect ratio information During Live View shooting, vertical lines corresponding to the aspect ratio will be displayed. You can thereby simulate framing for medium- and large-format film sizes such as 6x6 cm, 6x4.5 cm, and 4x5 in. This aspect ratio information will be appended automatically to the captured image. (The image will not actually be saved to the memory card as a cropped image.
3 Registering and Applying Custom Function Settings You can register up to three sets of Custom Function settings. You can register a different set of Custom Function settings for different shooting situations such as sports, snapshots, and landscapes. You can then instantly apply a registered set of Custom Function settings. Registering Custom Function Settings 1 Select [C.Fn setting register/ apply]. Under the [8] tab, select [C.Fn setting register/apply], then press <0>. Y P O [Register].
3 Registering and Applying Custom Function Settings The settings for C.Fn III -7 [AF Microadjustment] and C.Fn IV -11 [Focusing Screen] will not be included in the registered Custom Function settings. To view the registered Custom Function settings, select [Confirm settings]. The numbers of options changed from the default setting are displayed in blue. If the option’s settings include [Disable/Enable/Register] and it is set to [Enable], a blue [ * ] will be displayed.
3 Registering My Menu By registering the menu items and Custom Functions which you change frequently, you can access and change them quickly with My Menu. You can register the top layer of items under each menu tab and any Custom Function. You can register up to six items in My Menu. Sample Registering My Menu Items 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. Y P O [Register]. 2 Select Turn the <5> dial to select C [Register], then press <0>. an item.
3 Registering My Menu Deleting My Menu Items In step 2, select [Delete], then select the item to be deleted. To delete all the My Menu items, select [Delete all items]. Start Display with My Menu In step 2, select [Display from My Menu], and set [Enable]. With the camera ready for shooting, pressing the button will display the [9] tab first. Sorting My Menu Items In step 2, select [Sort]. Select the item to be sorted and press <0>.
3 Saving and Loading Camera Settings [Save]. 2 Select Turn the <5> dial to select [Save], then press <0>. [Start]. 3 Select Turn the <5> dial to select [Start], then press <0>. X The camera settings will be saved to the memory card, and the screen in step 2 will reappear. C Y P O If you select [Change file name], you can change the file name (8 characters) and save the file. (For the procedure, see “Changing the File Name” on page 77.
3 Registering Basic Camera Settings You can set the basic settings for major functions such as the shooting mode, AF mode, metering mode, and drive mode and register them in the camera. This is convenient when you want to instantly switch to frequently-used shooting settings. Registering Basic Settings 1 Select [Regist/apply basic settings]. Under the [7] tab, select [Regist/apply basic settings], then press <0>. [Register]. 2 Select Turn the <5> dial to select [Register], then press <0>.
11 Reference Y P O This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up things.
Camera Settings & Battery Information B Camera Settings When the camera is ready to shoot, you can press the button to view the function settings on the LCD monitor. Display the camera settings. Press the button. Picture Style (p.57) Picture Style parameters (p.58) Y P O Color space (p.72) WB correction (p.70)/ BKT setting (p.71) C File name setting (p.77) Shots remaining on CF card and SD card (p.53) Date/Time (p.46) Auto rotate display (p.130) AF microadjustment (p.169) If C.
Camera Settings & Battery Information 3 Battery Info. You can check the battery’s condition on a menu screen. Select [Battery info.]. Under the [6] tab, select [Battery info.], then press <0>. Designation of the battery being used or household power source. Y P O Remaining battery level displayed by the battery check display (p.29) in 1% increments. C Shots taken with the current battery. The number is reset when the battery is recharged.
Replacing the Date/Time Battery The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2025 lithium battery as described below. The date/time setting will also be reset, so be sure to set the correct date/time. 1 Set the power switch to <2> and remove the battery pack. The back-up battery is on the ceiling of the battery compartment.
Program Line IS O 1 20 00 40 0 16 800 0 00 The following program line applies when the camera is in Program AE mode. 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4 2 1 0 C -1 -2 -3 -4 -5 EV Y P O 22 Aperture 3 32 16 11 8 5.6 4 2.8 2 1.4 30 15 8 4 2 1 2 4 1.0 8 15 30 60 125 250 500 1000 2000 4000 8000 Shutter speed Understanding the Program Line The lower horizontal axis represents the shutter speed, and the right-hand vertical axis represents the aperture.
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power The battery cannot be recharged with the battery charger provided. To prevent mishaps, the battery charger cannot recharge any battery other than Battery Pack LP-E4. The camera does not operate even when the power switch is set to <1>. The battery is not properly installed in the camera. (p.
Troubleshooting Guide Shooting No images can be shot or recorded. The memory card is not properly inserted. (p.32) If the memory card is full, replace the card or delete unnecessary images to make room. Or if a not-full memory card is inserted in the other card slot, switch the recording to that card. (p.32, 73, 128) If you try to focus in the One-Shot AF mode while the focus confirmation light in the viewfinder blinks, a picture cannot be taken.
Troubleshooting Guide Live View shooting is not possible. When using Live View shooting, use a memory card (a hard disk-type card such as MicroDrive is not recommended). A hard disk-type card requires a lower temperature range for operation than with normal memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card’s hard disk. When the camera’s internal temperature decreases, the Live View shooting will be able to resume. (p.
Error Codes Error code Countermeasures If there is a problem with the camera, an error message appears. Follow the instructions displayed. To recover from the error, press the shutter button halfway, turn the power switch <2> and <1>, or remove and reinstall the battery. If error 02 (memory card problem) is displayed, remove and reinstall the memory card or format the card. This may resolve the problem. If the same error keeps appearing, there may be a problem.
System Map ST-E2 270EX Dioptric Adjustment Lenses Eg 430EX II 580EX II Macro Twin Lite MT-24EX Bundled Accessories Anti-Fog Eyepiece Eg Eyecup Eg Macro Ring Lite MR-14EX Wide Strap L6 C Y P O USB cable protector CR2025 lithium battery Angle Finder C Hand Strap E1 EOS DIGITAL Software Instruction Solution Disk Manual Battery Pack LP-E4 Focusing Screen Ec 194 AC Adapter Kit ACK-E4 Battery Charger LC-E4 Car Battery Cable CB-570
System Map Timer Remote Controller TC-80N3 Remote Switch RS-80N3 Wireless Controller LC-5 Canon EF lenses Interface Cable IFC-200U Y P O TV/Video Wireless File Transmitter WFT-E2 II A/B/C/D* or WFT-E2/E2A Video Cable VC-100 C Interface Cable IFC-500U Wireless LAN access point USB external media USB GPS unit Wireless LAN adapter Ethernet port Original Data Security Kit OSK-E3 CF card Card reader USB port PC card slot Personal computer Windows 7 Windows Vista Windows XP Mac OS X PictBrid
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera Type I or II CF card, SD/SDHC memory card * CF cards, and Microdrive cards with a 2GB or larger capacity can be used * High-speed data writing enabled with UDMA CF cards * With Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/ A attached, recording possible with USB external media Approx.
Specifications File name: File numbering: Color space: Picture Style: Recording methods: Image copy: Backup: Preset code, User setting1 (4 characters), User setting2 (3 characters + 1 image size character) Consecutive numbering, auto reset, manual reset sRGB, Adobe RGB Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Def. 1 - 3 (1) Standard (2) Auto switch media (recording media switched automatically) (3) Rec. separately (specified image size for each recording media) (4) Rec.
Specifications Viewfinder information: AF information (AF points, focus confirmation light), metering and exposure information (metering mode, spot metering circle, shutter speed, aperture, manual exposure, AE lock, ISO speed, exposure level, exposure warning), flash information (flash ready, FP flash, FE lock, flash exposure level), white balance correction, JPEG/RAW recording, maximum burst, number of shots remaining, battery check, recording media information Depth-of-field preview: Enabled with depth-o
Specifications AE lock: Auto: Applied in One-Shot AF mode with evaluative metering when focus is achieved Manual: By AE lock button in all metering modes • Shutter Type: Shutter speeds: Shutter release: Self-timer: Remote control: Electronically-controlled, focal-plane shutter 1/8000 to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.) X-sync at 1/250 sec. Soft-touch electromagnetic release 10-sec. or 2-sec.
Specifications Metering modes: Metering range: Magnified view: Grid display: Exposure simulation: Evaluative metering with the image sensor EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100) Magnifiable by 5x or 10x at AF point Provided Provided • LCD Monitor Type: Monitor size: Dots: Coverage: Brightness adjustment: Interface languages: TFT color liquid-crystal monitor 3.0 in. Approx. 230,000 Approx.
Specifications • Direct Image Transfer Compatible images: JPEG and RAW/sRAW images * Only JPEG images can be transferred as wallpaper on the personal computer screen • Customization Custom Functions: C.
Specifications • Battery Pack LP-E4 Type: Rated voltage: Battery capacity: Dimensions (W x H x D): Weight (Approx.): Rechargeable lithium ion battery 11.1 V DC 2300mAh 68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in. 180 g / 6.3 oz. (excluding protective cover) • Battery Charger LC-E4 Type: Recharging time: Rated input: Charger dedicated to the Battery Pack LP-E4 Approx. 120 min. (for 1 pack) 100 - 240 V AC (50/60 Hz) 12 V / 24 V DC Rated output: 12.6 V DC, 1.55 A Power cord length: Approx. 2 m / 6.6 ft.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other countries. CompactFlash is a trademark of SanDisk Corporation. The SDHC logo is a trademark. All other corporate and product names and trademarks mentioned in this manual are the property of their respective owners.
Digital Camera Model DS126161 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E4. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E4. Other types of batteries may burst, causing personal injury and other damage. 4. Do not expose the charger to rain or snow. 5.
Index Index A AC adapter................................23, 31 Access lamp .............................18, 34 Adjust levels..................................144 Adobe RGB.....................................72 AE ...................................................92 AE lock..........................................101 AEB...............................................100 AF ...........................................85, 167 AF microadjustment......................169 AF mode ..............................
Index Center-weighted average metering ..........................................91 CF card .........................13, 32, 47, 73 CF card slot.....................................32 Clean manually .............................135 Clean now .....................................132 Clear all camera settings ................49 Clear all Custom Functions...........156 Close-up (macro) photography .....104 Cloudy.............................................63 Color balance................................
Index Eyepiece .........................................17 Eyepiece shutter ...........................103 F Face brightener.............................144 Faithful ............................................57 FE lock..........................................105 FEB...............................................105 File extension..................................78 File name ........................................77 File number.....................................79 File size..........................
Index Jump by 1/10/100 images.............119 Jump by date ................................119 Jump by folder ..............................119 Jump display .................................119 L Landscape ......................................57 Language ........................................46 Large...............................................52 LCD brightness .............................129 LCD monitor....................................13 LCD panel ...........................
Index Power cord..........................22, 26, 31 Power source......................26, 31, 47 Power Switch ..................................36 Pressing completely........................37 Pressing halfway.............................36 Print copies ...........................143, 149 Print order (DPOF)........................137 Print settings .................................140 Printer errors.................................146 Printing effects ......................142, 144 Program AE (P) ........
Index Single image display .....................116 Single image erase .......................128 Single image playback ..................116 Single image protection ................123 Single shooting ...............................87 Skip ...............................................127 Small ...............................................52 Software instruction manual ................................. CD-ROM Sound clip .....................................124 Sound recording...........................
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
