iB4000 series Online Manual Read Me First Useful Functions Available on the Machine Overview of the Printer Printing Troubleshooting English
Contents Read Me First. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Symbols Used in This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Search Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Notes on Operation Explanations. . . . . . . . .
Preparing to Use Print from E-mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Timezone List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Print Easily from a Smartphone or Tablet with MAXIFY Printing Solutions. . . . . . . . . . . 101 Printing with Windows RT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the Ink Status from Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Checking the Ink Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Checking the Ink Status with the LCD on the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About Quiet setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Turning on/off the Printer Automatically. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Using the Printer with the Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Information about Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the Administrator Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Printing from a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Printing with Application Software that You are Using (Printer Driver). . . . . . . . . . . . . . . . . . . . . . . . . 268 Printing with Easy Setup. . . .
Canon IJ Printer Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Opening the Canon IJ Printer Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 Maintenance of this Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Display the Printing Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Problems with Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 Printing Does Not Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Paper Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 Paper Does Not Feed Properly/"No Paper" Error Occurs. . . . . . . . . . . . . . .
1314. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417 In Other Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 1007. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 1008. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5205. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456 5206. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457 5207. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458 5208. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 7200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491 7201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 7202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read Me First Notes on Online Manual Usage How to Print Notes on Online Manual Usage • Reproduction, diversion or copying of any text, photo or image published in the Online Manual (hereinafter referred to as "this guide"), in whole or in part, is prohibited. • In principle, Canon shall change or delete the contents of this guide without prior notice to customers. In addition, Canon may suspend or stop the disclosure of this guide due to unavoidable reasons.
Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation. Important Instructions including important information.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity.
their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution.
goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License.
Enter keywords in the search window and click (Search). You can search for target pages in this guide. Search Tips You can search for target pages by entering keywords in the search window. Note • The displayed screen may vary. • When searching from this page or the "Home" page without entering your product's model name or your application's name, all products supported by this guide will be considered for the search.
Note • The displayed screen varies depending on your product. • Searching for Application Functions Enter your application's name and a keyword for the function you want to learn about Example: When you want to learn how to print collages with My Image Garden Enter "My Image Garden collage" in the search window and perform a search • Searching for Reference Pages Enter your model name and a reference page title* * You can find reference pages more easily by entering the function name as well.
Notes on Operation Explanations In this guide, most of the operations are described based on the windows displayed when OS X Mavericks v10.9 is used.
Useful Functions Available on the Machine Connect Wirelessly with Ease in "Access Point Mode" Download a Variety of Content Materials Print Items with Easy-PhotoPrint+ (Web Application) Use the Printer More Conveniently with Quick Toolbox Connection Methods Available on the Printer Notice for Web Service Printing Use MAXIFY Cloud Link Printing with Google Cloud Print Printing from AirPrint Compliant Device Checking Printer Information How to Use Print from E-mail Print Easily from a Smartphone or Tablet wit
Connect Wirelessly with Ease in "Access Point Mode" The printer supports "access point mode" in which you can connect to the printer wirelessly from a computer or smartphone even in an environment without an access point or wireless LAN router. Switch to "access point mode" with simple steps to enjoy printing wirelessly. When you use the printer with the access point mode, be sure to specify the access point name of the printer and the security setting in advance.
Download a Variety of Content Materials CREATIVE PARK A "printing materials site" where you can download all the printing materials for free. Various types of content such as seasonal cards and paper crafts that can be made by assembling paper parts are provided. CREATIVE PARK PREMIUM A service where customers using models that support PREMIUM Contents can download exclusive printing materials. PREMIUM Contents can be downloaded easily via Easy-PhotoPrint+.
Print Items with Easy-PhotoPrint+ (Web Application) You can easily create and print personalized items such as calendars and collages, anytime and anywhere, by simply accessing Easy-PhotoPrint+ on the web from a computer or tablet. By using Easy-PhotoPrint+, you can create items in the latest environment without going through the trouble of installation. Moreover, you can use various photos for your item through integration with social networks such as Facebook, or with online storage, web albums, etc.
Use the Printer More Conveniently with Quick Toolbox Quick Toolbox is a shortcut menu that lets you access the functions you want to use with one click. After installing utilities compatible with Quick Toolbox, they will be added to this menu. The Quick Toolbox provides a convenient way to quickly launch added utilities for making printer settings and doing other management tasks. Refer to "Quick Toolbox Guide" for details.
Connection Methods Available on the Printer The following connection methods are available on the printer. Wireless Connection With an access point Without an access point Wired Connection USB Connection Wireless Connection There are two methods for connecting the printer to your device (such as a smartphone). One method is to connect using an access point, and the other method is to connect without using an access point. The two connection methods cannot be used at the same time.
• When the connection between a device and an access point is completed and (Wi-Fi icon) is displayed in the device's screen, you can connect the device to the printer using the access point. Connection without Using an Access Point • Connect the printer and a device without using an access point. Connect a device and the printer directly using the printer's access point mode function. • When establishing a connection in access point mode, Internet connection may become unavailable.
Connection without Using an Access Point (Windows XP) Restrictions (Appears in a new window) 1. Make sure that the screen below is displayed. If another screen is displayed, press the Setup button (A) on the printer. 2. Press the Setup button. 3. Use the or button (B) to select Device settings, then press the OK button. 4. Select LAN settings, then press the OK button. 5. Select Change LAN, then press the OK button. 6. Select AP mode active, then press the OK button.
7. Select SSID, then press the OK button. 8. Check SSID information in the printer screen, then press the Back (C). You will use the SSID information in the subsequent steps. 9. Select Security protocol, then press the OK button. 10. Check the Password (network key), then press the Back button. You will use the Password (network key) in the subsequent steps. 11. Select Start setup, then press the OK button. 12.
13. Select the network name (SSID) you want to use, then click Connect. 14. Enter the Password (Network key), then click Connect. 15. When connection is complete, click Back until the screen below appears. Proceed with the setup.
Restrictions When connecting another device while a device (such as a smartphone) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.
• When connecting a device and the printer in access point mode, Internet connection may become unavailable. In that case, web services for the printer cannot be used. • In access point mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again.
Notice for Web Service Printing When Using Web Service • Canon does not guarantee the continuity and reliability of the web services provided, the availability of site access, or permission to download the materials. • Canon may at any time update, change, or delete the information provided through the web service, or may suspend or discontinue the service without prior notice. Canon shall not be held responsible for any damages resulting from such actions.
When printing downloaded template forms: 1. The copyright of each material (photos, illustrations, logos, or documents: hereinafter referred to as "the materials") provided on the web template printing service belongs to their respective owners. Issues pertaining to Rights of Publicity may arise regarding the use of any of people or characters displayed on the web template printing service.
Use MAXIFY Cloud Link By using MAXIFY Cloud Link, you can connect your printer to a cloud service, such as CANON iMAGE GATEWAY, Evernote, or Twitter, and use the following functions without using a computer: • Print images from a photo-sharing service • Print documents from a data management service • Use Twitter to report the printer status, such as no paper or low ink levels. In addition, you can use various functions by adding and registering apps that are linked with various cloud services.
Using MAXIFY Cloud Link from Your Smartphone, Tablet, or Computer Before Using Canon Inkjet Cloud Printing Center Preparations Before Using Canon Inkjet Cloud Printing Center Using Canon Inkjet Cloud Printing Center Adding a Printer Adding a MAXIFY Cloud Link User Troubleshooting Canon Inkjet Cloud Printing Center 36
Before Using Canon Inkjet Cloud Printing Center Canon Inkjet Cloud Printing Center is a service that links with the cloud function of the printer and allows you to perform operations such as registering and managing apps from your smartphone or tablet device, and checking the print status, print error, and ink status of the printer. You can also print app photos and documents from your smartphone or tablet.
Requirements for Canon Inkjet Cloud Printing Center operation Computer CPU x86 or x64 1.
• In an in-house network environment, the 5222 port must be released. For confirmation instructions, contact the network administrator.
Preparations Before Using Canon Inkjet Cloud Printing Center To use the Canon Inkjet Cloud Printing Center, you need to follow the steps described below and register the user information. Print registration information from the printer 1. On the printer operation panel, select the Setup button, and then select Web service setup -> Connection setup -> IJCloudPrintingCtr -> Register w/ service 2. In the registration confirmation window, Select Yes 3. In the print settings, select the display language 4.
Important • The operation to complete the registration should be done within 60 minutes. Access the URL on the printed page, and then enter the e-mail address and other necessary information Important • Do not use the Back button of the web browser while an operation is processing. The screen may not transition properly. 1.
2. On the Login screen, select Create new account 3. Enter the E-mail address and Printer registration ID of the printer's owner, and then select OK The registration page URL is sent to the e-mail address entered. Important • There are character restrictions for the e-mail address, as shown below. • You can use up to 255 alphanumeric characters consisting of single-byte characters and symbols (!#$%&'*+/=?^_{}|~.-@). • Multibyte characters cannot be used.
• You may not be able to receive the notification if you are using a spam filter. If you have a setting to receive only the e-mails from certain domains, be sure to change the setting to allow receiving e-mails from "noreply@mail.cs.c-ij.com". There will be no error display even if you could not receive the e-mail because of the spam filter setting or if you entered an incorrect e-mail address. Access the URL in the e-mail, register the information, and complete the user registration 1.
3. In the user information entry screen, enter your Password, and select Next Enter your password for logging in to the Canon Inkjet Cloud Printing Center. Important • There are character restrictions for the Password, as shown below. • The password needs to be between 8 and 32 characters long, using single-byte alphanumeric characters and symbols (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). (Alphabets are case-sensitive) 4. Enter the User name Enter the name that identifies the user.
Important • The User name entry field has the following character restrictions: • The password needs to be between 1 and 20 characters long, using single-byte alphanumeric characters and symbols (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). (Alphabets are case-sensitive) 5. Specify the Time zone setting, and select Next Select your region on the list. If you cannot find your region on the list, select the one closest to your region.
A Security code identifies the user when multiple other users are sharing the same printer. Important • The Security code entry field has the following character restrictions: • Single-byte numbers The registration is complete. A registration completion message is displayed. When you select the OK button in the message, the login screen is displayed. Enter the registered e-mail address and password, and log in to the Canon Inkjet Cloud Printing Center.
Printing Your Printer registration ID To add a printer by using Canon Inkjet Cloud Printing Center, you will need a Printer registration ID. From the operation panel of this printer, print the URL of the authentication site and your Printer registration ID. The procedure is as follows: 1. Check that the printer is connected to the Internet Important • To use this function, you must connect this printer to the Internet. 2.
Canon Inkjet Cloud Printing Center window This section describes the Canon Inkjet Cloud Printing Center screens that are displayed on your smartphone, tablet device, or computer. Description of the Login screen Description of the Main screen Description of the Login screen This section provides the description of the Login screen of Canon Inkjet Cloud Printing Center. Important • You have 5 tries to enter your password. If you fail, you will not be able to log in for about the next hour.
Create new account A new registration will be added to the Canon Inkjet Cloud Printing Center. For a new registration, you need the Printer registration ID. System requirements This displays the system requirements for the Canon Inkjet Cloud Printing Center. Help/legal notices (smartphone and tablet devices only) The description of the Canon Inkjet Cloud Printing Center screen and various reminders are displayed.
If you are using a smartphone or tablet (1) Left context menu (2) Printer name area (3) Right context menu (4) Display area (5) Menu area (1) Left context menu When you select , the Mng. printer screen of the Manage users screen appears. For general users, the Select printer screen appears. Mng.
From the Mng. printer screen (Select printer screen), you can check*and update* printer information registered to the Canon Inkjet Cloud Printing Center, change printer names, delete printers, add printers, and copy apps. • Check the printer information* The registered printer name is displayed. indicates the currently selected printer. indicates that an error occurred on the printer.
• Change the printer name When you select , a screen to change the printer name appears. Follow the instructions on the screen to change the name. Note • The printer name entry has the following character limitation: • Up to 128 characters • Delete printers , the printer is deleted from the Canon Inkjet Cloud Printing Center. When you select When transferring the ownership of the printer, select Clear the information saved on the printer.
• User deletion Select the check box of the user to be deleted, and select Delete. However, you cannot delete yourself. To delete yourself, cancel your membership from the user information screen. • Adding a user Select Add user. The user registration screen appears. • Changing Administrator and Standard user settings You can change the privileges of the Administrator and Standard users. (2) Printer name area The registered name of the printer selected is displayed.
• Latest notices* This displays the latest notices. The • symbol indicates that there is a new unread notice. User information* This displays the User information screen. You can change the registered e-mail address, password, language, time zone, and other settings. • Help/legal notices* The description of the Canon Inkjet Cloud Printing Center screen and various reminders are displayed. Log out* • This opens the Log out screen of the Canon Inkjet Cloud Printing Center.
(5) Menu area The following 4 menu buttons are displayed: • Apps* This displays the list of registered apps in the Display area. • Config This displays the Register apps screen in the Display area. The display can be toggled between Registered and Search apps. The Registered screen lists registered apps. You can check the information of these apps or deregister them.
On the Search apps screen, the apps that you can register by using the Canon Inkjet Cloud Printing Center are displayed by category. ◦ When you select When you select , the details of the app are displayed. / , you can choose to register or unregister the app.
not support your model. : Can be used with genuine Canon ink. • Properties* This screen displays the status of the printer that is currently selected. You can check how much ink is remaining or details about an error that occurred. You can also access the ink purchasing site and the Online Manual. Important • The Properties displayed may differ from the actual status at the display time, depending on the printer status. • Manage jobs* This screen displays the print status and the print history.
(5) Notices area (6) Information area (7) Global navigation area (8) Display area (1) Mng. printer (Select printer) button When you select the Mng. printer (Select printer) button, the Mng. printer (Select printer) screen appears. From the Mng. printer screen (Select printer screen), you can check*and update* printer information registered to the Canon Inkjet Cloud Printing Center, change printer names, delete printers, add printers, and copy apps.
• Display update date/time of the printer information* This displays the date and time the printer information was last updated. refreshes the information. • Multiuser mode If multiple users are using the printer, select the Multiuser mode check box. • Change the printer name When you select , a screen to change the printer name appears. Follow the instructions on the screen to change the name.
Set the Destination printer and the Source printer. Then select OK. (2) Manage users button When you select the Manage users button, the Manage users screen appears. From the Manage users screen, you can check user information registered to the Canon Inkjet Cloud Printing Center, delete users, add users, and change the Administrator and Standard user settings. • User deletion Select the check box of the user to be deleted, and select Delete. However, you cannot delete yourself.
• Sort (Apps) This displays the list of registered apps in the Display area. Drag the app to change the order. When you finish sorting, press the Set sort order button and confirm the order. • Config This displays the Register apps screen in the Display area. The display can be toggled between Registered and Search apps. The Registered screen lists registered apps. You can check the information of these apps or deregister them.
◦ When you select , the details of the app are displayed. When you select / , you can choose to register or unregister the app. Note • Description of displayed icons : Cannot be used because it is not yet released, not available in your region, or does not support your model. : Can be used with genuine Canon ink. • Properties* This screen displays the status of the printer that is currently selected. You can check how much ink is remaining or details about an error that occurred.
(5) Notices area This displays the latest notice. Nothing is displayed in this area if there is no notice. When you select Notice list, you can display up to 40 items. (6) Information area This display other information, including the privacy statement and other companies' licensing information. (7) Global navigation area The User information*, Instructions*, and Log out* buttons are displayed. Press the User information to change the settings.
Using Canon Inkjet Cloud Printing Center When the user registration is completed, you can log in to the Canon Inkjet Cloud Printing Center and use the service. 1. From your PC, smartphone, or tablet, access the service login URL (http://cs.c-ij.com/) 2. On the Login screen, enter the E-mail address and Password, and then select Log in Important • The e-mail address and password are case-sensitive. Make sure the case is correct.
Important • • • • The available functions differ depending on the app. The printing procedure differs depending on the app. You need to get the account and register photo and other data beforehand. The following file formats can be printed: jpg, jpeg, pdf, docx, doc, xlsx, xls, pptx, ppt, and rtf. The file formats that can be printed differ depending on the app. • Before you print, check that printer is on and is connected to the network. Then start.
4. In the displayed image list, select the image that you want to print, and then select Next 5.
6. A print job completion message appears, and printing starts To end the printing, select Apps and return to the Apps list screen. To continue printing, select Continue and repeat the procedure from step 3. Important • If a print job is not printed within 24 hours after the print job is issued, the print job will expire and cannot be printed. • With premium apps that limit the number of print jobs, print jobs that expire and cannot be printed are also included in the print count.
Adding a Printer With one account, you can use the Canon Inkjet Cloud Printing Center services on multiple printers. The procedure for adding a printer is as follows: 1. Print the registration information from the printer to be added 2. From the browser on your smartphone, tablet, or computer, access the authentication site URL 3. Select Add printer 4. When the confirmation message is displayed, select OK 5.
Note • When you access the service from Remote UI, the Printer registration ID is entered automatically. 6. Enter the Password for the account you obtained beforehand, and select OK Printer addition is completed. If a printer added message is not displayed, follow the instructions on the displayed screen.
Adding a MAXIFY Cloud Link User Several people can use one printer. This section describes the user addition procedure and the user privileges. Adding a user 1. On the service screen, select Manage users 2. Select Add user Note • When you select Add user, the service first checks whether the maximum number of users has been reached. If new users can be added, the user registration screen appears. • The maximum number of users that can be added for 1 printer is 20.
3. Enter the e-mail address of the user to be added, and then select OK The URL for completing the registration is then sent to the entered e-mail address. 4. Access the URL reported in the e-mail 5. Read the terms displayed in the License agreement and Privacy statement screens. If you agree to the terms, select Agree. 6.
Enter your password for logging in to the Canon Inkjet Cloud Printing Center. Important • There are character restrictions for the password, as shown below. • The password needs to be between 8 and 32 characters long, using single-byte alphanumeric characters and symbols (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). (Alphabets are case-sensitive) 7. Enter the User Name Enter the name that identifies the user.
• The password needs to be between 1 and 20 characters long, using single-byte alphanumeric characters and symbols (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~). (Alphabets are case-sensitive) 8. Set Time zone and select Next Select your region on the list. If you cannot find your region on the list, select the one closest to your region. Apply daylight saving time This appears only when there is a daylight saving time in the time zone that you selected. Select whether or not to apply the daylight saving time. 9.
Important • The Security code entry field has the following character restrictions: • Single-byte numbers The main registration is complete, and a registration completion e-mail is sent. Note • A cookie for the selected user is added to the printer, and the login status of each user is recovered. Cookies for up to 8 users can be registered to 1 printer. Printer user privileges If several users are using the cloud service for 1 printer, each user is categorized as the Administrator or a Standard user.
Troubleshooting Canon Inkjet Cloud Printing Center If an app cannot be installed If the registered app is not in the Apps list If the information is not updated when you press the Update button If you do not receive the registration e-mail Printing starts on its own even if you do not do anything If you are unable to log in correctly even after entering the correct password in iOS or Mac If an app cannot be installed Check the country or region where the printer was purchased.
If you are unable to log in correctly even after entering the correct password in iOS or Mac If you are using iOS or Mac, and the password contains the ¥ symbol, enter a backslash instead. For instructions on entering a backslash, see the OS help.
What is a Security code? A Security code identifies the user when multiple other users are sharing the same printer. Important • If you do not set a Security code, another user may use your account. • This code is valid only when you use MAXIFY Cloud Link from the printer operation panel. You cannot use this code when you access the Canon Inkjet Cloud Printing Center from your smartphone, tablet, or computer.
Printing with Google Cloud Print The printer is compatible with Google Cloud Print™ (Google Cloud Print is a service provided by Google Inc.). By using Google Cloud Print, you can print from anywhere with applications or services supporting Google Cloud Print. 1. Preparations for Printing with Google Cloud Print 2.
Preparations for Printing with Google Cloud Print To print with Google Cloud Print, you need to get Google account and register the printer with Google Cloud Print in advance. Getting Google Account If you already have Google account, register the printer. Registering the Printer with Google Cloud Print Getting Google Account First, get your Google account in order to register the printer with Google Cloud Print.
2. From the operation panel, select the Setup button. 3. Select Web service setup -> Connection setup -> GoogleCloudPrint -> Register w/ service Note • If you have already registered the printer with Google Cloud Print, the confirmation message to re-register the printer is displayed. 4. When the confirmation screen to register the printer is displayed, select Yes 5.
3. Select Web service setup -> Connection setup -> GoogleCloudPrint -> Delete from service 4.
Printing from Computer or Smartphone with Google Cloud Print When you send print data with Google Cloud Print, the printer receives the print data and prints it automatically if the printer is turned on. When printing from a smartphone, tablet, computer, or other external device by using Google Cloud Print, load paper into the printer in advance. Sending the Print Data with Google Cloud Print 1.
• If you select plain paper as media type or if you select B5/A5-size as paper size, the print data is printed with border even when you select the borderless print setting. • The print results may differ from the print image depending on the print data. • Depending on the device sending the print data, you may not select the print settings when sending the print data with Google Cloud Print.
Printing from AirPrint Compliant Device This document explains how to use AirPrint to print wirelessly from your iPad, iPhone and iPod touch to a Canon printer. AirPrint enables you to print photos, email, Web pages and documents from your Apple device directly to your printer without installing a driver. Checking Your Environment First, check your environment.
3. From the menu options, tap Print. 4. From Printer Options, select the model that you are using. Important • Because some app does not support AirPrint, Printer Options may not be displayed. If an app does not let you use printer options, you cannot print from that app. Note • The Printer Options differ depending on the app and model you are using.
5. When printing a file type that has multiple pages, such as a PDF file, click Range and then click All Pages or select the range of pages to be printed. 6. For 1 Copy, click + or - to set the number of required copies. 7. For Duplex Printing, click On to enable duplex printing or click Off to disable the function. 8. Tap the Print. When you execute printing, the printer prints according to the specified settings.
Deleting a Print Job To delete a print job with AirPrint, use one of the following two methods: • From the printer: If your printer has a LCD monitor, use the operation panel to cancel the print job. If you printer does not have a LCD monitor, press the Stop button on the printer to cancel the print job. • From an Apple device: Press the Home button on the Apple device twice to set the Multitasking mode, and then swipe to the right. Tap the Print Center icon to display a Print Summary.
Note • After you turn on the printer, it may take few minutes before the printer can communicate through a wireless LAN connection. Confirm that the printer is connected to the wireless LAN, and then try printing. • If Bonjour on the printer is disabled, AirPrint cannot be used. Check the LAN settings on the printer, and enable Bonjour. Note • The windows used in the explanations may differ from those displayed by your Apple product or app.
Checking Printer Information You can use your smartphone, tablet, or computer to check the Printer status and execute utility functions from apps such as Canon Inkjet Print Utility and MAXIFY Printing Solutions. You can also use the convenient web services presented by Canon. 1. Selecting Printer Information in an Apps Screen Note • You can also enter IPv4 address directly in the web browser to display printer information. 1.
Printer status This function displays printer information such as the remaining ink amount, the status, and detailed error information. You can also connect to the ink purchase site or support page, and use Web Services. Utilities This function allows you to set and execute the printer utility functions such as cleaning. AirPrint settings This function allows you to specify the Apple AirPrint settings, such as position information.
Manual (Online) This function displays the Online Manual.
How to Use Print from E-mail By using Print from E-mail, you can easily print a photo or document saved on your smartphone, tablet, or computer just by attaching it to an e-mail. You can print simply from outside like a travel destination. Also, your family or friends can print by registering beforehand. You can use Print from E-mail on any Canon printer that supports the service. Checking Your Environment First, check your environment.
4. Access the URL provided in the e-mail and complete the printer registration process Note • The e-mail address that appears on the screen when you have finished registering is the e-mail address that will be used just for the Print from E-mail function. For details about the registration procedure, see here Printing from Your Smartphone, Tablet, or Computer 1. Prepare a file that you want to print The file format, number of files, and file size that this printing function supports are provided below.
Use the Service With More Than One Person To allow multiple users to use this function, register users (other than the printer's owner) as members. 1. The printer's owner uses his/her smartphone, tablet, or computer to access the service's login URL (https://pr.mp.c-ij.com/po) and logs in 2. Select the printer name that you want to add the member.
If you want to check the error details, the printer owner have to access the login URL (https://pr.mp.cij.com/po). Note • For a wireless LAN connection, after the printer is turned on, it may take a few minutes before communication becomes possible. Confirm that your printer is connected to the wireless LAN, and then try printing.
Preparing to Use Print from E-mail To use this service to print a photo or document, you need to follow the procedure provided below and register the printer. Print the Printer Registration Page's URL and the PIN Code First, print the printer registration page's URL and the PIN code. Check that there is sufficient amount of ink in the printer, and then print using the printer's operation panel. 1.
• If domain-specific reception is set, change the setting so that mail can be received from "info@mp.c-ij.com" Note • The e-mail address of the printer owner cannot be changed once the printer owner is registered. To change the e-mail address, delete the registration of the registered printer, and re-register the printer owner by using the new e-mail address. In this case, all previously registered information will be deleted.
6. In the Confirm Owner Registration window, check the registration information, and select Register A temporary password will be displayed. Important • The temporary password that appears is not included in the notification e-mail. Be sure to write down the temporary password before closing the screen. Check if an E-mail Has Been Sent to the E-mail Address You Entered A URL is notified to complete the registration to the e-mail address that for the registered printer's owner.
Timezone List (UTC-12:00) International Date Line West (UTC-11:00) Midway Island (UTC-10:00) Hawaii (UTC-09:00) Alaska (UTC-08:00) Tijuana, Baja California, Pacific Time (US & Canada) (UTC-07:00) Arizona, Chihuahua, La Paz, Mazatlan, Mountain Time (US & Canada) (UTC-06:00) Guadalajara, Mexico City, Monterrey, Saskatchewan, Central America, Central Time (US & Canada) (UTC-05:00) Indiana (East), Bogota, Lima, Quito, Eastern Time (US & Canada), Caracas (UTC-04:00) Asuncion, Santiago, Georgetown, La Paz, San Ju
Print Easily from a Smartphone or Tablet with MAXIFY Printing Solutions Use MAXIFY Printing Solutions to easily print photos saved on a smartphone or tablet wirelessly. MAXIFY Printing Solutions can be downloaded from App Store and Google Play.
Printing with Windows RT When you use Windows RT, printing is easy because you simply connect this printer to the network. For information about connecting to the network, see the setup URL (http://www.canon.com/ijsetup) for using this product from your computer, smartphone, or tablet device. When the connection is complete, the Canon Inkjet Print Utility software, which allows you to specify detailed print settings, is downloaded automatically.
Overview of the Printer Safety Guide Safety Precautions Regulatory and Safety Information Main Components and Basic Operations Main Components About the Power Supply of the Printer LCD and Operation Panel Loading Paper / Originals Loading Paper Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status from Your Computer Checking the Ink Status Maintenance When Printing Becomes Faint or Colors Are Incorrect Performing Maintenance from a Computer Cleaning the Printer Changing the Printer Settin
Safety Guide Safety Precautions Regulatory and Safety Information 104
Safety Precautions Choosing a location • Do not install the machine in a location that is unstable or subject to excessive vibration. • Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source. To avoid the risk of fire or electric shocks, use the machine under the operating environment specified in the On-screen Manual. • Do not place the machine on a thick rug or carpet.
Regulatory and Safety Information For models containing lithium battery • Dispose of used batteries according to the local regulations. • Risk of explosion if battery is replaced by an incorrect type. Users in the U.S.A. FCC Notice (U.S.A. Only) For 120V, 60Hz model Model Number: K10409 (Contains FCC ID: AZDK30357) This device complies with Part 15 of the FCC Rules.
Users in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Korisnici u Srbiji Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa WEEE Direktivom (2012/19/EU) i nacionalnim zakonima. Ovaj proizvod treba predati određenom centru za prikupljanje, npr. na osnovi "jedan-za-jedan" kada kupujete sličan novi proizvod, ili ovlašćenom centru za prikupljanje za reciklažu istrošene električne i elektronske opreme (EEE).
Energy Star® The Energy Star® programme is a voluntary scheme to promote the development and purchase of energy efficient models, which help to minimise environmental impact. Products which meet the stringent requirements of the Energy Star® programme for both environmental benefits and the amount of energy consumption will carry the Energy Star® logo accordingly.
Main Components and Basic Operations Main Components About the Power Supply of the Printer LCD and Operation Panel 110
Main Components Front View Rear View Inside View Operation Panel 111
Front View (1) operation panel Use to change the settings of the printer or to operate it. Operation Panel (2) front cover Open to replace an ink tank or remove jammed paper inside the printer. (3) paper output tray Pull out to support printed paper. It will then cover the cassette. Pull out for normal use. (4) cassette 1 Accepts all sizes of paper compatible with this printer (plain paper, photo paper, envelopes, etc.).
Rear View (1) rear cover Open when removing jammed paper. (2) power cord connector Plug in the supplied power cord. (3) wired LAN connector Plug in the LAN cable to connect the printer to a LAN. (4) USB port Plug in the USB cable to connect the printer with a computer. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable or LAN cable while printing.
Inside View (1) ink tank eject lever Push up when removing an ink tank. (2) print head holder The print head is pre-installed. Note • For details on replacing an ink tank, see Replacing an Ink Tank.
Operation Panel * All lamps on the operation panel are shown lit in the figure below for explanatory purposes. (1) LCD (Liquid Crystal Display) Displays messages, menu items, and the operational status. (2) ON button Turns the power on or off. Turning the Printer On and Off (3) POWER lamp Lights after flashing when the power is turned on. (4) Stop button Cancels a print job in progress. (5) Alarm lamp Lights or flashes when an error occurs. (6) OK button Finalizes the selection of a menu or setting item.
About the Power Supply of the Printer Confirming that the Power Is On Turning the Printer On and Off Notice for the Power Plug/Power Cord Notice for Unplugging the Power Cord 116
Confirming that the Power Is On The POWER lamp is lit when the printer is turned on. Even if the LCD is off, if the POWER lamp is lit, the printer is on. Note • It takes about 10 seconds until you can operate the printer after you turn on its power. Wait until the standby screen is displayed on the LCD. • The LCD will turn off if the printer is not operated for about 5 minutes. To restore the display, press any button except the ON button on the operation panel or perform the print operation.
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The POWER lamp flashes and then remains lit. Confirming that the Power Is On Note • It takes about 10 seconds until you can operate the printer after you turn on its power. Wait until the standby screen is displayed on the LCD. • If the Alarm lamp lights up or flashes and an error message is displayed on the LCD, see A Message Is Displayed.
Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval. This is the default setting. For details on the auto power off feature, see below.
Notice for the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • • • • • The power plug/power cord is hot. The power plug/power cord is rusty. The power plug/power cord is bent. The power plug/power cord is worn. The power plug/power cord is split. Caution • If you find anything unusual with the power plug/power cord described above, unplug the power cord and call for service.
Notice for Unplugging the Power Cord To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the POWER lamp is off. Unplugging the power cord before the POWER lamp is turned off may cause drying or clogging of the print head and print quality may be reduced. 1. Press the ON button to turn the printer off. 2. Confirm that the POWER lamp is off. 3. Unplug the power cord.
LCD and Operation Panel Pressing the Setup button (A) on the operation panel shows the Setup menu screen to select various functions or settings. Selecting a Menu or Setting Item On the menu screen or settings screen, use the the OK button (C) to proceed with the procedure. or button (B) to select an item or option, then press To return to the previous screen, press the Back button (D). Example: Changing the automatic paper source switching setting for the cassettes.
Use the or button (B) to change the setting, then press the OK button (C).
Loading Paper Loading Paper 124
Loading Paper Paper Sources to Load Paper Loading Plain Paper / Photo Paper Loading Envelopes Media Types You Can Use Media Types You Cannot Use Printing Area 125
Paper Sources to Load Paper Page Sizes and Media Types compatible with the printer Paper can be loaded into two sources, the upper cassette 1 (A) and lower cassette 2 (B). In the upper cassette 1 (A), all sizes of paper compatible with this printer (plain paper, photo paper, envelopes, etc.) can be loaded. In the lower cassette 2 (B), A4, Letter, and Legal-sized plain paper can be loaded.
D: Lock position for stowing the cassette When not using this printer for long period of time or moving it, set it to the position D. The cassette will fit into the width of the printer. Paper cannot be loaded while in this position. E: Lock position for A4 or Letter-sized paper or smaller For A4 or Letter-sized paper or smaller, set it to the position E. The cassette sticks out of the printer, but you can cover it by pulling out the paper output tray. Set the cassette to this position for normal use.
Loading Plain Paper / Photo Paper You can load paper in the cassette 1 or cassette 2. * This section describes how to load paper in the cassette 1. The procedure to loading paper in cassette 2 is also the same. Important • If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can cause paper jams. Note • In the cassette 1, you can load all sizes of paper compatible with this printer (plain paper, photo paper, envelopes, etc.).
3. Slide the paper guide (A) in front and (B) on the right to open the guides. 4. Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of the cassette. Important • Always load paper in the portrait orientation (C). Loading paper in the landscape orientation (D) can cause paper jams. Note • If paper has print side (front or back), such as photo paper, load it with the whiter side (or glossy side) facing down.
• To load 5" x 7" (13 x 18 cm) size paper or smaller, raise the tab (F) of the paper guide. (5" x 7" (13 x 18 cm) size paper or smaller can be loaded in the cassette 1 only.) • To load paper larger than A4 size in the cassette, press down the lock (G) on the cassette, then extend the cassette all the way out. 5. Align the paper guide (A) in front with the paper stack. For standard sizes, set the paper guide (A) to where it clicks into place. 6.
Note • Do not load sheets of paper higher than the load limit mark (H). • Keep the paper stack height below the tabs (I) of the paper guides. 7. Insert the cassette into the printer. Push the cassette into the printer until it stops. After inserting the cassette into the printer, the paper information registration screen for the cassette is displayed on the LCD.
8. Press the OK button. 9. Use the or button to select the size of the loaded paper in the cassette, then press the OK button. Note • The asterisk " " will appear with the current page size and media type settings. Paper setting for Printing 10. Use the or button to select the type of the loaded paper in the cassette, then press the OK button. 11. Extend the output tray extension (J), then open the paper output support (K).
Loading Envelopes You can load envelopes in the cassette 1. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction. • Envelopes with an embossed or treated surface • Envelopes with a double flap • Envelopes whose gummed flaps are already moistened and adhesive 1. Prepare envelopes.
3. Slide the paper guide (A) in front and (B) on the right to open the guides. 4. Load the envelopes WITH THE PRINT SIDE FACING DOWN, and place them in the center of the cassette 1. The folded flap of the envelope will be faced up as shown in the figure below (C). C: Rear side D: Address side Up to 10 envelopes can be loaded at once. Note • Align the envelope stack with the edge of the cassette 1 as shown in the figure below.
5. Align the paper guide (A) in front with the envelopes. 6. Slide the paper guide (B) on the right to align the right and left guides with both sides of the envelopes. Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly. Note • Do not load envelopes higher than the load limit mark (F). • Keep the envelope stack height below the tabs (G) of the paper guides. 7. Insert the cassette 1 into the printer. Push the cassette 1 into the printer until it stops.
8. Press the OK button. 9. Use the or button to select the size of the loaded envelopes in the cassette, then press the OK button. Note • The asterisk " " will appear with the current page size and media type settings. Paper setting for Printing 10. Use the or button to select the type of the loaded envelopes in the cassette, then press the OK button. 11. Extend the output tray extension (H), then open the paper output support (I).
Note • When printing, select the size and type of the loaded envelopes on the print settings screen of the printer driver.
Media Types You Can Use To get the best printing result, choose paper suitable for printing. Canon provides various types of paper suitable for documents as well as paper suitable for photos or illustrations. We recommend the use of Canon genuine paper for printing your important photos. Media Types Commercially available papers • Plain Paper (including recycled paper) • Envelopes Canon genuine papers The Model Number of Canon genuine paper is shown in brackets.
• • • • • • • • A5 A4 B5 4" x 6" (10 x 15 cm) 5" x 7" (13 x 18 cm) 8" x 10" (20 x 25 cm) Envelope DL Envelope Com 10 Non-standard sizes: You can print on non-standard size paper within the following ranges. • cassette 1 - Minimum size: 3.50 x 5.00 inches (89.0 x 127.0 mm) - Maximum size: 8.50 x 14.00 inches (215.9 x 355.6 mm) • cassette 2 - Minimum size: 8.27 x 11.00 inches (210.0 x 279.4 mm) - Maximum size: 8.50 x 14.00 inches (215.9 x 355.
Paper Load Limit Commercially Available Papers Media Name Cassette 1 Cassette 2 Paper Output Tray Plain Paper (including recycled paper)*1 Approx. 250 sheets Approx. 250 sheets Approx. 75 sheets Envelopes 10 envelopes N/A*2 *3 Canon Genuine Papers Note • Feeding the following papers from the cassette 2 can damage the printer. Always load in the cassette 1.
*4 When loading paper in stacks, the print side may become marked as it is fed or paper may not feed properly. In this case, load one sheet at a time.
Media Types You Cannot Use Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction.
Printing Area Printing Area Other Sizes than Letter, Legal, Envelopes Letter, Legal Envelopes 143
Printing Area To ensure the best print quality, the printer allows a margin along each edge of media. The actual printable area will be the area inside these margins. Recommended printing area : Canon recommends that you print within this area. Printable area : The area where it is possible to print. However, printing in this area can affect the print quality or the paper feed precision. Note • With performing Automatic Duplex Printing, the printable area will be 0.
Other Sizes than Letter, Legal, Envelopes Size Printable Area (width x height) A5 5.56 x 7.95 inches (141.2 x 202.0 mm) A4 8.00 x 11.38 inches (203.2 x 289.0 mm) B5 6.90 x 9.80 inches (175.2 x 249.0 mm) 4" x 6" (10 x 15 cm) 3.73 x 5.69 inches (94.8 x 144.4 mm) 5" x 7" (13 x 18 cm) 4.73 x 6.69 inches (120.2 x 169.8 mm) 8" x 10" (20 x 25 cm) 7.73 x 9.69 inches (196.4 x 246.0 mm) Recommended printing area A: 1.80 inches (45.8 mm) B: 1.45 inches (36.8 mm) Printable area C: 0.12 inch (3.0 mm) D: 0.
Letter, Legal Size Printable Area (width x height) Letter 8.00 x 10.69 inches (203.2 x 271.4 mm) Legal 8.00 x 13.69 inches (203.2 x 347.6 mm) Recommended printing area A: 1.80 inches (45.8 mm) B: 1.45 inches (36.8 mm) Printable area C: 0.12 inch (3.0 mm) D: 0.20 inch (5.0 mm) E: 0.25 inch (6.4 mm) F: 0.25 inch (6.
Envelopes Size Recommended Printing Area (width x height) Envelope DL 3.88 x 6.69 inches (98.8 x 170.0 mm) Envelope Com 10 3.68 x 8.24 inches (93.5 x 209.3 mm) Recommended printing area Envelope DL A: 0.83 inch (21.0 mm) B: 1.14 inches (29.0 mm) C: 0.22 inch (5.6 mm) D: 0.22 inch (5.6 mm) Envelope Com 10 A: 0.12 inch (3.0 mm) B: 1.14 inches (29.0 mm) C: 0.22 inch (5.6 mm) D: 0.22 inch (5.
Replacing an Ink Tank Replacing an Ink Tank Checking the Ink Status 148
Replacing an Ink Tank When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error. Take appropriate action according to the message. A Message Is Displayed Note • If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure. Replacing Procedure When you need to replace an ink tank, follow the procedure below. Important • If you remove an ink tank, replace it immediately.
Caution • Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder until it stops completely. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. • You cannot remove the ink tank which is not placed at the replacement position.
3. Remove the ink tank from the package. Important • Do not touch the contact (C) and joint (D) of the ink tank. 4. Insert a new ink tank aligning it with the installation guide (E) of the printer.
Important • You cannot insert the ink tank in the wrong position. Check the label under the installation position, then install the ink tank in the correct position. 5. Push the ink tank until it snaps firmly into place. 6. Press the OK button to select [OK]Exit. If [OK]Next is displayed on the screen, it means there is another ink tank that can be replaced. If you want to replace this ink tank, press the OK button and then repeat procedures from step 2.
After replacing the ink tanks, the printer starts mixing the ink automatically. Wait until the printer has stopped making operating noise. (This takes about 1 to 2 minutes.) Note • If the error message appears on the LCD, take appropriate action. A Message Is Displayed • If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, align the print head. • The printer may make noise during operation.
Checking the Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. 1. Select Ink Level Information from the pop-up menu on the Canon IJ Printer Utility An illustration of the ink types and their status is displayed. If a warning or error related to the remaining ink level occurs, the printer driver displays an icon to let you know. 2. If necessary, click Ink Details You can check the ink-related information.
Checking the Ink Status Checking the Ink Status with the LCD on the Printer You can also check the ink status on the computer screen.
Checking the Ink Status with the LCD on the Printer You can check the ink status on the LCD. A symbol appears in the area (A) if there is any information about the remaining ink level. Example: Ink tank is running low. Prepare a new ink tank. Note • The above screen shows estimated ink levels. • Select Print ink number in Ink information on the Setup menu screen to print the model number of the ink tank. • You can also check the ink status on the computer screen.
Maintenance When Printing Becomes Faint or Colors Are Incorrect Performing Maintenance from a Computer Cleaning the Printer 157
When Printing Becomes Faint or Colors Are Incorrect Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Cleaning the Print Head Deeply Aligning the Print Head 158
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Note • Increasing the print quality in the printer driver settings may improve the print result. Changing the Print Quality and Correcting Image Data When the Print Results Are Blurred or Uneven: Step1 Print the nozzle check pattern.
When the Print Results Are Not Even such as the Ruled Lines Are Misaligned: Step Align the print head.
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • When the ink has run out during printing the nozzle check pattern, the error message will appear on the LCD. A Message Is Displayed You need to prepare: a sheet of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern A or horizontal white streaks in the pattern B. C: Number of sheets printed so far If there are missing lines in the pattern A: Cleaning the print head is required. D: Good E: Bad (lines are missing) If there are horizontal white streaks in the pattern B: Cleaning the print head is required.
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. Note • You can also clean the print head using the computer. When using the computer, select the ink group to clean, then start cleaning.
Cleaning the Print Head Deeply If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary. Note • You can also clean the print head deeply using the computer. When using the computer, select the ink group to clean, then start the deep cleaning.
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • When the ink has run out during printing the nozzle check pattern, the error message will appear on the LCD. A Message Is Displayed You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)* * Be sure to use paper that is white and clean on both sides. 1. Make sure that the power is turned on. 2.
Aligning the Print Head Position Manually from Your Computer 166
Performing Maintenance from a Computer Cleaning the Print Heads from Your Computer Use Your Computer to Print a Nozzle Check Pattern Aligning the Print Head Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer 167
Cleaning the Print Heads from Your Computer The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. The procedure for cleaning the print head is as follows: Cleaning 1. Select Cleaning from the pop-up menu on the Canon IJ Printer Utility 2. Click the Cleaning icon When the dialog opens, select the ink group for which cleaning is to be performed.
When the dialog opens, select the ink group for which deep cleaning is to be performed. Click to display the items you need to check before performing deep cleaning. 3. Execute deep cleaning Make sure that the printer is on and then click OK. Click OK when the confirmation message appears. Print head deep cleaning starts. 4. Complete deep cleaning The Nozzle Check dialog opens after the confirmation message. 5. Check the results To check whether the print quality has improved, click Print Check Pattern.
Use Your Computer to Print a Nozzle Check Pattern The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1. Select Test Print from the pop-up menu on the Canon IJ Printer Utility 2. Click the Nozzle Check icon The confirmation message appears.
Aligning the Print Head When you perform head position adjustment, errors in the print head adjustment position are corrected and conditions such as color and line streaking are improved. If the print results appear uneven because of line shifts or other conditions, adjust the position of the print head. On this printer, you can adjust the print head either automatically or manually.
Aligning the Print Head Position from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
Note • After head alignment is completed, you can print and check the current setting. To do so, click the Print Head Alignment icon and when the message is displayed, click Print Alignment Value.
Aligning the Print Head Position Manually from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
Important • Do not open the front cover while printing is in progress. 8. Check the printed pattern Enter the numbers of the patterns with the least noticeable streaks in the associated boxes, and click OK. Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks. (A) Least noticeable vertical streaks (B) Most noticeable vertical streaks 9. Confirm the displayed message and click OK The second pattern is printed.
Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal stripes. (A) Least noticeable horizontal stripes (B) Most noticeable horizontal stripes • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks. (A) Least noticeable vertical streaks (B) Most noticeable vertical streaks Note • After head alignment is completed, you can print and check the current setting.
Cleaning the Printer Cleaning the Exterior of the Printer Cleaning the Paper Feed Roller Cleaning the Inside of the Printer (Bottom Plate Cleaning) Cleaning the Pad in the Cassette 177
Cleaning the Exterior of the Printer Be sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning. Important • Be sure to turn off the power and unplug the power cord before cleaning the printer. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface.
Cleaning the Paper Feed Roller If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary. You need to prepare: three sheets of A4 or Letter-sized plain paper 1. Make sure that the power is turned on. 2. Press the Setup button, use the or button to select Maintenance, then press the OK button. LCD and Operation Panel 3.
If the problem is not resolved after cleaning the paper feed roller, contact the service center.
Cleaning the Inside of the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper. 1. Make sure that the power is turned on, then remove any paper from the cassette 1. 2. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper.
5. Extend the output tray extension, then open the paper output support. 6. Press the Setup button, use the or button to select Maintenance, then press the OK button. LCD and Operation Panel 7. Use the or button to select Bottom cleaning, then press the OK button. The paper cleans the inside of the printer as it feeds through the printer. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again.
Cleaning the Pad in the Cassette If the pad in a cassette is smeared with paper powder or dirt, two or more sheets of paper may be ejected. Follow the procedure below to clean the pad in a cassette. You need to prepare: cotton swab 1. Pull out the cassette 1 or cassette 2 from the printer, then remove all the paper. 2. Clean the pad (A) sideways with a moistened cotton swab. Important • After cleaning the smeared pad, dry it completely. For an example of the cassette 1: 3.
Changing the Printer Settings Changing Printer Settings from Your Computer Changing the Machine Settings on the LCD 184
Changing Printer Settings from Your Computer Checking the Ink Status from Your Computer Registering a Changed Printing Profile Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 185
Checking the Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. 1. Select Ink Level Information from the pop-up menu on the Canon IJ Printer Utility An illustration of the ink types and their status is displayed. If a warning or error related to the remaining ink level occurs, the printer driver displays an icon to let you know. 2. If necessary, click Ink Details You can check the ink-related information.
Registering a Changed Printing Profile You can name and register the printing profile you made in the Print Dialog. The registered printing profile can be called up from Presets to be used. You can also delete the unnecessary printing profile. The procedure for registering a printing profile is as follows: Registering a Printing Profile 1. In the Print dialog, set the necessary items 2. Select Save Current Settings as Preset... (Save As...) from the Presets 3.
Deleting Unnecessary Printing Profile 1. Select the printing profile to be deleted • If you are using OS X Mavericks v10.9, OS X Mountain Lion v10.8, or OS X Lion v10.7 In the print dialog, select Show Presets... in the Presets section. Then in the dialog that appears, select the name of the printing profile to be deleted. • If you are using Mac OS X v10.6.8 On Presets in the Print dialog, select the name of printing profile you want to delete. 2.
Managing the Printer Power This function allows you to manage the printer power from the printer driver. The procedure for managing the printer power is as follows: Power Off The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the printer driver. 1. Select Power Settings from the pop-up menu on the Canon IJ Printer Utility 2. Execute power off Click Power Off, and when the confirmation message appears, click OK.
Important • If you connect this printer to a network and use it, you can set Auto Power Off but the power will not be turned off automatically.
Reducing the Printer Noise The silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for using the quiet mode is as follows: 1.
Make sure that the printer is on and click Apply. Click OK when the confirmation message appears. The settings are enabled hereafter. Note • The effects of the quiet mode may be less depending on the paper source and the print quality settings.
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. The procedure for configuring Custom Settings is as follows: 1. Make sure that the printer is on, and then select Custom Settings from the pop-up menu on the Canon IJ Printer Utility Note • If the computer is unable to communicate with the printer, a message may be displayed because the computer cannot access the function information that was set on the printer.
display and allows you to continue printing. To disable detection of paper setting mismatches, select this check box. 3. Apply the settings Click Apply and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter.
Changing the Machine Settings on the LCD Changing the Printer Settings on the LCD Output settings LAN settings Dev.
Changing the Printer Settings on the LCD This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Prevent abrasion as an example. Note • The * (asterisk) on the LCD indicates the current setting. 1. Make sure that the printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed. 3. Use the button to select Device settings, then press the OK button. The Device settings screen is displayed. 4.
About Quiet setting 197
Output settings • Prevent abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
LAN settings • Change LAN Enables either wireless LAN, wired LAN, or access point mode. You can also disable all. • Wireless LAN setup Selects the setup method for wireless LAN connection. Note • You can also enter this setting menu by selecting Wireless LAN setup from the Setup menu screen. When this menu is selected, the printer starts searching for a WPS-compatible access point. If the printer detects the access point, follow the on-screen instructions to set up wireless LAN.
Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7, and Windows Vista. Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour for Mac OS. Enab./disab. Bonjour Selecting Active allows you to use Bonjour to perform the network settings. ◦ LPR setting Activates/deactivates the LPR setting. ◦ DRX setting Enables discontinuous reception when using wireless or wired LAN.
Dev. user settings • Language selection Changes the language for LCD messages and menus.
Firmware update You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen. Note • Only Current version is available when LAN inactive is selected for Change LAN in LAN settings. • Install update Performs the firmware update of the printer. Important • When you use this function, make sure that the printer is connected to the Internet. Note • If the firmware update is not complete, check the following and take an appropriate action.
Cassette settings By registering the paper size and the media type loaded in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. In addition, you can allow the printer to switch the paper source automatically when a cassette runs out of paper. • Register paper info Registers the paper size and the media type you load in the cassette.
Reset setting Reverts all settings you made to the printer back to the default. However, some data may not be changed, depending on the current usage state of your printer. • Web service setup Reverts the Web service settings back to the default. • LAN settings Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default. • Setting data Reverts the settings such as the paper size or media type back to the default.
About Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. 1. Make sure that the printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed. 3. Use the button to select Quiet setting, then press the OK button. 4. Use the button to select ON, then press the OK button. The LCD returns to the Setup menu screen.
Turning on/off the Printer Automatically You can enable the printer to turn on/off automatically considering the environment Turning on the Printer Automatically Turning off the Printer Automatically Turning on the Printer Automatically You can enable the printer to turn on automatically when printing data is sent to the printer. 1. Make sure that the printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed. 3.
Using the Printer with the Access Point Mode By using the printer as an access point in an environment that does not have wireless LAN router or access point, or by using the printer as an access point temporarily in an environment that has wireless LAN router or access point, you can connect the printer to an external device such as a computer or a smartphone and print from them. This section describes how to enable the access point mode, the access point name of the printer, and the security setting.
Note • If you select SSID or Security protocol using the button and press the OK button, you can confirm the current access point name (SSID) and the current security setting. Printing with the Access Point Mode Print with the access point mode following the procedure below. 1. Connect an external device such as a computer or a smartphone to the printer via wireless LAN. Perform wireless LAN settings with your external device, then assign the access point name specified for the printer as a destination.
Setting of the Access Point Mode The initial value of the access point mode is set as follows. SSID (access point name) XXXXXX-iB4000series * "XXXXXX" is the last six digits of MAC address of the printer. Security setting WPA2-PSK (AES) Password Serial number of the printer Note • To confirm the MAC address of the printer, print out the network setting information. Printing Out Network Setting Information • You can change the security setting and the password using IJ Network Tool.
Information about Network Connection Useful Information about Network Connection 210
Useful Information about Network Connection Default Values Set at Factory (Network) Connecting the Printer to the Computer Using a USB Cable When Detecting the Printers Have the Same Name Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN Printing Out Network Setting Information 211
Default Values Set at Factory (Network) Default Values of the LAN Connection Item The default Change LAN LAN inactive SSID BJNPSETUP Communication mode Infrastructure Wireless LAN security Disable IP address (IPv4) Auto setup IP address (IPv6) Auto setup TCP/IP settings IPv4/IPv6 Enable/disable IPv6 Active Enable/disable WSD Active Timeout setting 1 minute Enab./disab.
Connecting the Printer to the Computer Using a USB Cable Connect the printer and the computer using a USB cable as the illustration below. The USB port is located on the rear of the printer.
When Detecting the Printers Have the Same Name When the printer is detected, you may see multiple printers of the same name on the detection result screen. The printer names on the screen are displayed with the MAC address added at the end of the names or displayed as the printer name specified by Bonjour. Select a printer with checking the MAC address, the printer name specified by Bonjour, or the serial number set to the printer against that on the detection result screen.
Connecting to Other Computer with LAN/Changing the Connection Method from USB to LAN To add the computer connecting the printer with LAN or to change the connection method between the printer and the computer from USB to LAN, perform setup according to the instructions on our website. Connecting to Other Computer with LAN To add the computer connecting the printer with LAN, perform setup according to the instructions on our website.
Printing Out Network Setting Information You can print out the current network settings of the printer. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Press the Setup button. The Setup menu screen is displayed. 4. Use the button to select Device settings, then press the OK button. 5. Use the button to select LAN settings, then press the OK button. 6.
IPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXX Subnet Mask Subnet Mask XXX.XXX.XXX.
Bonjour Service Name Bonjour service name Bonjour service name (Up to 52 alphanumeric characters) DNS Server Getting DNS Server automatically Auto/Manual Primary Server Primary server address XXX.XXX.XXX.XXX Secondary Server Secondary server address XXX.XXX.XXX.XXX Proxy Server Proxy Server setting Enable/Disable Proxy Port Specifying Proxy Port 1 to 65535 Proxy Address Proxy Address XXXXXXXXXXXXXXXXXXXX ("XX" represents alphanumeric characters.
About Network Communication Changing and Confirming Network Settings Appendix for Network Communication 219
Changing and Confirming Network Settings IJ Network Tool Canon IJ Network Tool Screen Canon IJ Network Tool Menus Changing the Settings in the Wireless LAN Sheet Changing the WEP Detailed Settings Changing the WPA/WPA2 Detailed Settings Changing the Settings in the Wired LAN Sheet Changing the Settings in the Admin Password Sheet Monitoring Wireless Network Status Initializing the Network Settings of the Machine Viewing the Modified Settings 220
IJ Network Tool IJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed when the machine is set up. Important • To use the machine over LAN, make sure you have the equipment necessary for the connection type, such as an access point or a LAN cable. • Do not start up IJ Network Tool while printing. • Do not print when IJ Network Tool is running.
Canon IJ Network Tool Screen This section describes the items displayed on the Canon IJ Network Tool screen. 1. Utilities Modifies the settings of the machine. Select to change the network name (SSID) settings. Setup Sets up the machine. If you setup the machine from scratch, connect your computer and the machine with a USB cable. 2. Printers: Printer name, type, and connection destination are displayed. The selected printer can be set up or be modified. 3. Update Performs printer detection again.
4. Configuration... Enabled when Utilities is selected. Click to display the Configuration screen to configure settings of the selected printer. Note • This item has the same function as Configuration... in the Settings menu.
Canon IJ Network Tool Menus This section describes the menus in Canon IJ Network Tool. 1. Canon IJ Network Tool menu About Canon IJ Network Tool Displays the version of this application. Quit Canon IJ Network Tool Exits IJ Network Tool. 2. View menu Status Displays the Status screen to confirm the printer connection status and wireless communication status. In the access point mode, this item is grayed out and you cannot confirm the printer connection status.
Set up printer's wireless LAN... You can change the access point mode settings. Perform settings following the message on the screen. If you change the Encryption Method: setting and the Password: setting, on the Set up printer's wireless LAN screen, the changed settings are applied to the printer settings. Note • You can use this function only when you are using a computer compatible with the wireless LAN. 4. Help menu Instructions Displays this guide.
Changing the Settings in the Wireless LAN Sheet To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings. Note • This screen is not available depending on the printer you are using.
Access point mode Connects external wireless communication devices (e.g. computers, smartphones, or tablets) to the printer using it as an access point. Note • When Access point mode is displayed on Network Type:, you cannot change the settings on the Wireless LAN sheet or the Admin Password sheet. • You can perform setting from Set up printer's wireless LAN... on the Settings menu when you use the printer with the access point mode.
The security has been strengthened more than WEP. If a network key has not been set, the Authentication Type Confirmation screen is displayed automatically. To change network key settings before, click Configuration... to display the WPA/WPA2 Details screen. Changing the WPA/WPA2 Detailed Settings 5. Configuration... The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 key selected in Encryption Method: can be confirmed and changed.
Note • Signal strength is displayed as follows. : Good : Fair : Poor • Type of encryption is displayed as follows. Blank: No encryption WEP: WEP is set WPA/WPA2: WPA/WPA2 is set 2. Refresh Click to update the list of access points when your target access point is not detected. If the target access point is set to a closed network (the stealth mode), click Cancel to return to the previous screen and enter the network name (SSID) in Network (SSID). Note • Make sure that the access point is turned on. 3.
Changing the WEP Detailed Settings Note • This screen is not available depending on the printer you are using. To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings. 1. Start up IJ Network Tool. 2. Select the printer in Printers:.
Hexadecimal (Hex) 10 digits 26 digits 2. Key Length: Select either 64 bit or 128 bit. 3. Key Format: Select either ASCII or Hex. 4. Key ID: Select the Key ID (index) set to the access point. Note • When the printer is connected to an AirPort Base Station via a LAN: When the printer is connected to an AirPort Base Station via a LAN, confirm the settings in Wireless Security of AirPort Utility. • Select 64 bit if WEP 40 bit is selected for the key length in the AirPort Base Station. • Select 1 for Key ID:.
Changing the WPA/WPA2 Detailed Settings Note • This screen is not available depending on the printer you are using. To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
• If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer and the access point match that set to the printer. Note • This machine supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2Personal).
Changing the Settings in the Wired LAN Sheet Note • This screen is not available depending on the printer you are using. • Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Click the Configuration... button. 4. Click the Wired LAN button. 5. Change the settings or confirm. Click OK after changing configuration.
Changing the Settings in the Admin Password Sheet Note • You cannot change the settings when using the access point mode. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Click the Configuration... button. 4. Click the Admin Password button. The Admin Password sheet is displayed. 5. Change the settings or confirm. 1. Use admin password Set an administrator password with privileges to set up and change detailed options. To use this feature, select this check box and enter a password.
A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted Settings screen is displayed. Enter Password Screen The following screen is displayed if an administrator password is set to the printer. • Admin Password Enter the administrator password that was set. For security purposes, your password is not displayed as you type it.
Monitoring Wireless Network Status Note • This screen is not available depending on the printer you are using. • When using the machine over the wired LAN, you cannot monitor network status. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Select Status from the View menu. The Status screen is displayed and you can check the printer status and connection performance. 1. Signal Level: Indicates the strength of the signal received by the printer, ranging from 0% to 100%. 2.
The wireless connection may use the same frequency band as microwave ovens and other sources of radio interference. Try to keep the printer and the access point away from such sources. • Check if the radio channel of the access point is close to that of other access points nearby. If the radio channel of the access point is close to that of other access points nearby, the connection performance may become unstable. Be sure to use a radio channel that does not interfere with other access points.
Initializing the Network Settings of the Machine Important • Note that initialization erases all network settings on the machine, and printing or scanning operation from a computer over network may become impossible. To use the machine over network, perform setup according to the instructions on our website. 1. Start up IJ Network Tool. 2. Select the printer in Printers:. 3. Select Maintenance... from the Settings menu. 1.
Viewing the Modified Settings The Confirmation screen is displayed when you modified the printer settings on the Configuration screen. When you click OK on the Confirmation screen, the following screen is displayed for confirming the modified settings. 1. Settings: A list of changes made in the Configuration screen is displayed.
Appendix for Network Communication Using the Card Slot over a Network About Technical Terms Restrictions 241
Using the Card Slot over a Network Note • This screen is not available depending on the printer you are using. Mounting the Card Slot as the Network Drive Restrictions on Card Slot Use over a Network Mounting the Card Slot as the Network Drive The card slot must be mounted to use it over a network. To mount the card slot as the network drive, follow the procedure below. 1. Insert a memory card into the card slot of the machine. 2. Check the current printer name.
• The card slot can be shared by multiple computers, if the machine is connected to a network. Multiple computers can read files from a memory card in the card slot at the same time. • If your computer joins a domain, the card slot may not be mounted as the network drive. • If you use the memory card stored the large size files or many files, a large amount of card access may be generated. In this case, the operation in the memory card may be impossible or slow.
About Technical Terms In this section, technical terms used in the manual are explained. A B C D F I K L M N P R S T U W A • Access Point A wireless transceiver or base station that receives information from wireless clients/the machine and rebroadcasts it. Required in an infrastructure network. • Access point mode The machine is used as an access point to connect external wireless communication devices (e.g.
• AirPort Network (Infra) Client computer and machine setup where all wireless communications pass through an access point. • Authentication Method The method that an access point uses to authenticate a printer through a wireless LAN. The methods are agreeable each other. When using WEP as an encryption method, the authentication method is able to fix to Open System or Shared Key. For WPA/WPA2, authentication method is PSK.
F • Firewall It is a system that prevents an unlawful computer access in the network. To prevent, you can use the firewall function of a broadband router, the security software installed in the computer, or operation system for computer. I • IEEE 802.11b International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of up to 11 Mbps. • IEEE 802.11g International standard for wireless LAN using the 2.4 GHz frequency range with a throughput of up to 54 Mbps. Compatible with 802.
• Key Length Length of the WEP key. Select either 64 bits or 128 bits. Longer key length allows you to set a more complex WEP key. L • Link Quality The status of connection between the access point and the printer excluding noise (interference) is indicated with a value from 0 to 100%. • LPR A platform-independent printing protocol used in TCP/IP networks. It is not supported bidirectional communication. M • MAC Address (AirPort ID) Also known as the physical address.
• PSK An encryption method employed by WPA/WPA2. R • Router A relay device to connect to another network. S • Signal Level The strength of the signal received by the printer from the access point is indicated with a value from 0 to 100%. • SSID Unique label for wireless LAN. It is often represented such as a network name or an access point name. SSID distinguishes one wireless LAN from another to prevent interference.
U • USB Serial interface designed to enable you to "hot-swap" devices, i.e., by plugging and unplugging them without turning off the power. W • WEP/WEP Key An encryption method employed by IEEE 802.11. Shared security key used to encrypt and decrypt data sent over wireless networks. This printer supports key length of 64 bits or 128 bits, key format of ASCII code or Hexadecimal, and key number of 1 to 4.
• WPS (Wi-Fi Protected Setup) WPS is a standard for easy and secure establishment of a wireless network. There are 2 primary methods used in the Wi-Fi Protected Setup: PIN entry: a mandatory method of setup for all WPS certified devices Push button configuration (PBC): an actual push button on the hardware or through a simulated push button in the software.
Restrictions If you use a printer over the wireless LAN, the printer may recognize nearby wireless systems, you should set a network key (WEP or WPA/WPA2) to the access point to encrypt wireless transmission. Wireless communication with a product that does not comply with the Wi-Fi standard cannot be guaranteed. Connecting with too many computers may affect the printer performance, such as printing speed.
Tips for Ensuring Optimal Printing Quality Useful Information about Ink Key Points to Successful Printing Be Sure to Check Paper Settings before Printing Be Sure to Set Cassette Paper Information after Loading Paper Canceling a Print Job Key to Enjoying Consistent Printing Quality Precautions for Safe Transport of the Printer 252
Useful Information about Ink How is ink used for various purposes other than printing? Ink may be used for purposes other than printing. When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink.
Key Points to Successful Printing Check the printer status before printing! • Is the print head OK? If a print head nozzle is clogged, print will be faint and papers will be wasted. Print the nozzle check pattern to check the print head. Maintenance Procedure • Is the inside of the printer smeared with ink? After printing large quantities of paper, the area where papers go through may get smeared with ink. Clean the inside of your printer with Bottom Plate Cleaning.
Be Sure to Check Paper Settings before Printing Before printing, make paper settings in the computer screen. There are various types of paper, such as paper with a special surface coating for printing photos at optimal quality and paper suitable for documents. Each media type has specific preset settings (how ink is used and sprayed, distance from nozzles, etc.), that allow you to print to that type with optimal image quality.
Be Sure to Set Cassette Paper Information after Loading Paper When you insert a cassette into the printer after loading paper, the screen for setting the type and size of paper is displayed. Set the cassette paper information according to the type and size of loaded paper. To prevent incorrect printing, this printer has a function that detects whether the information set for the paper loaded in the cassette matches the paper settings.
Canceling a Print Job Never press the ON button! If you press the ON button while printing is in progress, the print data sent from the computer queues in the printer and you may not be able to continue to print. Press the Stop button to cancel printing.
Key to Enjoying Consistent Printing Quality The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Never unplug the power cord until the power is turned off! If you press the ON button to turn off the power, the printer caps the print head (nozzles) automatically to prevent from drying.
Precautions for Safe Transport of the Printer When relocating the printer, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport. • Always transport the printer with ink tanks installed. If you transport the printer without ink tanks, ink in the print head may leak. • With the print head and ink tank left installed in the printer, press the ON button to turn off the power.
7. Use adhesive tape to secure all the covers on the printer to keep them from opening and to prevent the cassettes from falling out during transportation. Then pack the printer in the plastic bag. 8. Attach the protective material to the printer when packing the printer in the box.
Legal Limitations on Use of Your Product and Use of Images It may be unlawful to print the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Specifications General Specifications Printing resolution (dpi) 600 (horizontal) x 1200 (vertical) Interface USB Port: Hi-Speed USB *1 LAN Port: Wired LAN: 100BASE-TX / 10BASE-T Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2 *1 A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1. *2 Setup possible through WPS (Wi-Fi Protected Setup), WCN (Windows Connect Now) or Cableless setup.
Network Specifications Communication protocol TCP/IP Wired LAN Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transfer speed: 10 M/100 Mbps (auto switching) Wireless LAN Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region.
Mac OS Operating System Mac OS X v10.6.8 or later Browser Safari 5 or later Hard Disk Space 0.5 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. Display XGA 1024 x 768 Other Supported OS Some functions may not be available with each OS. Refer to the manual or the Canon web site for details on operation with iOS, Android, and Windows RT.
About the Administrator Password An administrator password "canon" is already specified for the printer at the time of purchase. Important • For security reasons, it is recommended to change the password before you use the printer. • You can change the password using one of the tools below. (Some tools may not be available depending on the printer you are using.
Printing Printing from a Computer Paper setting for Printing 266
Printing from a Computer Printing with Application Software that You are Using (Printer Driver) 267
Printing with Application Software that You are Using (Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Updating the Printer Driver 268
Printing with Easy Setup The simple setup procedure for carrying out appropriate printing on this printer is as follows: 1. Check that the printer is turned on 2. Load paper on the printer 3. Select the printer Select your model from the Printer list in the Print Dialog. Note • Click Show Details ( (the disclosure triangle)) to switch the Setup window to the detailed display. 4. Select the paper size For Paper Size, select the paper size to be used.
5. Select Quality & Media from the pop-up menu 6. Select the media type For Media Type, select the same paper type loaded in the printer.
7. Select the paper source Select Cassette (Auto Select), Cassette 1, or Cassette 2 that matches your purpose for Paper Source. Important • The paper source settings that can be selected may differ depending on the paper type and size. 8. Select the print quality For Print Quality, select High or Standard according to your purpose.
Important • The print quality settings that can be selected may differ depending on a printing profile. 9. Complete the setup Click Print. When you execute print, the document will be printed in accordance with the type and size of the media. Important • In the Presets section, click Save Current Settings as Preset... (Save As...) to register the specified settings. Note • If the paper settings on the print dialog differ from the cassette paper information registered on the printer, an error may occur.
• Paper Settings on the Printer Driver and the Printer (Media Type) • Paper Settings on the Printer Driver and the Printer (Paper Size) 273
Paper Settings on the Printer Driver and the Printer (Media Type) When you use this printer, selecting a media type and paper size that matches the print purpose will help you achieve the best print results. You can use the following media types on this printer.
Paper Settings on the Printer Driver and the Printer (Paper Size) When you use this printer, selecting a paper size that matches the print purpose will help you achieve the best print results. You can use the following paper sizes on this printer. Paper Size in the printer driver Cassette paper information registered on the printer US Letter Letter US Legal Legal A5 A5 A4 A4 JIS B5 (B5 JIS) B5 4x6 KG/4"x6" 5x7 2L/5"x7" 8 x 10 8"x10" L L Envelope #10 Env.
Various Printing Methods Setting the Number of Copies and Printing Order Setting the Stapling Margin Scaling the Printing to Fit the Paper Size Scaled Printing Page Layout Printing Duplex Printing Printing on Postcards Switching the Paper Source to Match the Purpose Displaying the Print Results before Printing Setting Paper Dimensions (Custom Size) 276
Setting the Number of Copies and Printing Order Collate pages + Reverse Collate pages + Normal Reverse The procedure for specifying the number of copies and printing order is as follows: 1. Specify the number of copies to be printed Specify the number of copies to print from the Copies in the Print Dialog. 2. Select Paper Handling from the pop-up menu 3.
5. Complete the setup Click Print. When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Setting the Stapling Margin The procedure for setting the margin width and the staple side is as follows: 1. Select Margin from the pop-up menu on the Print Dialog 2. Set the margin width and the staple side If necessary, set the Margin width, and select a stapling position from the Stapling Side list. Note • The printer automatically reduces the print area depending on the staple position margin.
Scaling the Printing to Fit the Paper Size The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Check the paper size Check that the Paper Size in the Print Dialog is the same as the paper size that you set in the application software. 2. Select Paper Handling from the pop-up menu 3. Set the print paper size Check the Scale to fit paper size check box.
Click Print. When you execute print, the document will be enlarged or reduced to fit to the page size.
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Select the printer In the Page Setup Dialog, select your model name from the Format For list. 2. Set scaled printing Specify the scaling factor in the Scale box, and click OK. Note • Depending on the Scale value that you set, an error message may be displayed. 3. Complete the setup On the Print Dialog, click Print. When you execute print, the document will be printed with the specified scale.
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Select Layout from the pop-up menu in the Print Dialog 2. Set the number of original you print on one page In Pages per Sheet, specify the number of page you print on one page. 3. If necessary, set the following items Layout Direction To change the page placement order, select an icon from the list.
4. Complete the setup Click Print. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
Duplex Printing The procedure for printing data on both sides of one sheet of paper is as follows: 1. Set duplex printing Check the Two-Sided check box in the Print Dialog. 2. Select Layout from the pop-up menu on the Print Dialog 3.
For Two-Sided, select either Long-Edge binding or Short-Edge binding. 4. Select Margin from the pop-up menu on the Print Dialog 5. Set the stapling margin If necessary, set the Margin width, and to change the Stapling Side, select a setting from the list. Note • Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can be selected differs. 6. Complete the setup Click Print. When you execute print, duplex printing will be started.
Printing on Postcards This section describes the procedure for postcard printing. 1. Load postcard on the printer 2. Select paper size in the Print Dialog Select Postcard or Postcard Double from the Paper Size menu. Important • Return postcards can be used only when you print them from the computer. • When printing a return postcard, always set the paper size to Postcard Double from your application software or the printer driver. • Do not fold the return postcard.
Switching the Paper Source to Match the Purpose In this printer, there are two paper sources, a cassette 1 and a cassette 2. You can facilitate printing by selecting a paper source setting that matches your media type or purpose. The procedure for setting paper source is as follows: 1. Select Quality & Media from the pop-up menu of the Print Dialog 2. Select the media type For Media Type, select the same paper type loaded in the printer. 3.
Click Print. When you execute print, the printer uses the specified paper source to print the data. Note • If the paper settings on the print dialog differ from the cassette paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper setting for Printing.
Displaying the Print Results before Printing If you are using Mac OS X v10.6.8, you can display and check the print result before printing. To display the print result before printing, click Preview on the Print Dialog. Note • When you click (the disclosure triangle) in the Print dialog and switch to the detailed display, Preview is not displayed. For detailed display, a preview is displayed on the left side of the Print dialog.
Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Paper Size menu. Such a paper size is called "custom size." The procedure for specifying a custom size is as follows: 1. Creating a new custom paper size In the Print Dialog, select Manage Custom Sizes... from Paper Size. In the Custom Paper Sizes dialog, click +. Untitled will be added to the list. 2.
Printing.
Changing the Print Quality and Correcting Image Data Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast 293
Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: 1. Select Quality & Media from the pop-up menu on the Print Dialog 2. Set grayscale printing Check the Grayscale Printing check box. 3. Complete the setup Click Print. When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome. Note • During Grayscale Printing, inks other than black ink may be used as well.
Specifying Color Correction You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively or by specifying a printing ICC profile from your application software, select ColorSync.
Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) 296
Optimal Photo Printing of Image Data When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor. To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose. Color Management Devices such as digital cameras, scanners, monitors, and printers handle color differently.
Adjusting Colors with the Printer Driver You can specify the color correction function of the printer driver to print with color tints that most people prefer through the use of Canon Digital Photo Color. When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management. The procedure for adjusting colors with the printer driver is as follows: 1.
Printing with ICC Profiles (Specifying an ICC Profile from the Application Software) When you print from Adobe Photoshop, Canon Digital Photo Professional, or any application software that can identify input ICC profiles and allows you to specify such profiles, printer uses the color management system (ColorSync) built-into Mac OS when printing.
Adjusting Brightness Adjusting Intensity Adjusting Contrast 300
Printing with ICC Profiles (Specifying an ICC Profile from the Printer Driver) Print from an application software that cannot identify or specify input ICC profiles by using the color space of the input ICC profile (sRGB) found in the data. 1. Select Color Matching from the pop-up menu of the Print Dialog 2. Select color correction Select ColorSync. You can leave Profile set to Automatic.
Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
Click Print. When you execute print, the document is printed with the adjusted color balance. Important • When the Grayscale Printing check box is checked for Quality & Media, the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable. • If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable.
Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed. Light is selected Normal is selected Dark is selected The procedure for adjusting brightness is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Specifying Color Correction Adjusting Color Balance Adjusting Intensity Adjusting Contrast 305
Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed. No adjustment Higher intensity The procedure for adjusting intensity is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Contrast 307
Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast. No adjustment Adjust the contrast The procedure for adjusting contrast is as follows: 1. Select Color Options from the pop-up menu of the Print Dialog 2.
Related Topics Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Intensity 309
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Page Setup Dialog Print Dialog Quality & Media Color Options Margin Canon IJ Printer Utility Opening the Canon IJ Printer Utility Maintenance of this Printer Display the Printing Status Screen Deleting the Undesired Print Job Instructions for Use (Printer Driver) 310
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this printer. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer. Because different models support different print data formats, you need a printer driver for the specific model you are using.
How to Open the Printer Driver Setup Window You can display the printer driver setup window from the application software you are using. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup Dialog opens. Opening the Print Dialog Use this procedure to set the print settings before printing. 1. Select Print...
Page Setup Dialog In the Page Setup dialog, you configure the basic print settings such as the size of paper loaded in the printer or the scaling ratio. To open the Page Setup dialog, you typically select Page Setup... from the File menu of your application software. Settings Click the pop-up menu, and then select the following items: Page Attributes Set the paper size or scaled printing. Save as Default You can save the attributes of the displayed page as the default settings.
Print Dialog In the Print dialog, you can set paper type, paper source and print quality to start printing. To open the Print dialog, you typically select Print... from the File menu of your application software. Printer Select the model to be used for printing. When you click Add Printer..., a dialog for specifying the printer opens. Presets You can save or delete the settings of the Print dialog. Note • If you are using OS X Mavericks v10.9, OS X Mountain Lion v10.8, or OS X Lion v10.
Layout You can set page layout printing. Use Reverse page orientation to change the paper orientation, and use Flip horizontally to print a mirror image of the document. You can also set duplex printing. Color Matching You can select the color correction method. Paper Handling You can set the pages to be printed on paper and the print order. Cover Page You can output cover pages both before and after a document. Scheduler You can set the print start time and print priorities.
Quality & Media This dialog allows you to create a basic print setup in accordance with the paper type. Unless special printing is required, normal printing can be performed just by setting the items in this dialog. Media Type Select the type of media to be used. You must select the type of media actually loaded in the printer. This selection enables the printer to carry out printing properly for the material of the media used. Paper Source Select the source from which paper is supplied.
Related Topics Switching the Paper Source to Match the Purpose Printing a Color Document in Monochrome 317
Color Options This dialog allows you to adjust the print color as you like. If the color of the printed image is not as expected, adjust the properties in the dialog and retry printing. The adjustments made here do not affect the colors of the original print data unlike application software dedicated to image processing. Use this dialog just to make fine adjustments. Preview Shows the effect of color adjustment. As you adjust each item, the effects are reflected in the color and brightness.
Brightness Select the brightness of printed images. You cannot change the levels of pure white and black. You can change the contrast of the colors between white and black. Intensity Select this method to adjust the overall density of your print. To increase the overall intensity, drag the slider to the right. To decrease the overall intensity, drag the slider to the left. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Margin This dialog allows you to set the stapling side and amount of margin for stapling multiple sheets of paper. Margin Specify the amount of margin space for stapling the paper. Enter a value between 0 inches (0 mm) to 1.2 inches (30 mm). Stapling Side Specify the stapling side. Long-side stapling (Left) / Long-side stapling (Right) Select this option to staple the long side of the paper. Choose left or right.
Canon IJ Printer Utility The Canon IJ Printer Utility allows you to perform printer maintenance or change the settings of the printer. What You Can Do with the Canon IJ Printer Utility You can switch between pages in Canon IJ Printer Utility by the pop-up menu. You can choose one of the following items from the pop-up menu. Cleaning Clean the printer to clear up clogged print head nozzle. Test Print Execute a test print to check the condition of the print head nozzle and to adjust the print head position.
Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 322
Opening the Canon IJ Printer Utility To open the Canon IJ Printer Utility, follow the steps below. 1. Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax) 2. Start the Canon IJ Printer Utility Select your model from the printer list, and click Options & Supplies.... Click Open Printer Utility in Utility tab. Canon IJ Printer Utility is launched.
Maintenance of this Printer Cleaning the Print Heads from Your Computer Use Your Computer to Print a Nozzle Check Pattern Aligning the Print Head Position from Your Computer Checking the Ink Status from Your Computer Managing the Printer Power Reducing the Printer Noise Changing the Printer Operation Mode 324
Display the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock. • If the print data has not been sent to the printer Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax).
Deletes the specified print job. Stops printing the specified document. Resumes printing the specified document. Displays the print job information. Stops printing all documents. Displayed only when printing of all documents is being stopped, and resumes printing all documents.
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners (Print & Scan or Print & Fax) 2. Select your model, and then click Open Print Queue... The print status check screen appears. 3. Select the unnecessary print job and click ( The selected print jobs will be deleted.
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • When you set up the Page Setup dialog, be sure to begin by selecting the model you are using from the Format For list. If you select another printer, printing may not be performed properly.
Updating the Printer Driver Obtaining the Latest Printer Driver Delete the Unnecessary Canon IJ Printer from the Printer List Before Installing the Printer Driver Installing the Printer Driver 329
Obtaining the Latest Printer Driver By updating the printer driver to the latest version of the printer driver, unresolved problems may be solved. You can access our website and download the latest printer driver for your model. Important • You can download the printer driver for free, but any Internet access charges incurred are your responsibility.
Delete the Unnecessary Canon IJ Printer from the Printer List A Canon IJ Printer that you no longer use can be deleted from the printer list. Before deleting the Canon IJ Printer, disconnect the cable that connects the printer to the computer. The procedure to delete the unnecessary Canon IJ Printer from the printer list is as follows: You cannot delete the Canon IJ Printer unless you are logged in as a user with the administrative right.
Before Installing the Printer Driver This section describes the items that you should check before installing the printer driver. You should also refer to this section if the printer driver cannot be installed. Checking the Personal Computer Settings • Terminate all running applications. • Log on as a user who has the administrator account. The installer will prompt you to enter the name and password of the administrative user.
Installing the Printer Driver You can access our web site through the Internet and download the latest printer driver for your model. The procedure for installing the downloaded printer driver is as follows: 1. Mount the disk Double-click the disk image file you have downloaded. The file is unpacked, and then the disk is mounted. 2. Start the installer Double-click "PrinterDriver_XXX_YYY.pkg" (where "XXX" is your model name, and "YYY" is version) contained in the disk. 3.
Paper setting for Printing By registering the paper size and the media type loaded in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. • When you load paper in the cassette: The screen to register the cassette paper information is displayed. Press the OK button, then register the paper size and the media type according to the loaded paper.
When you start printing, a message is displayed. Confirm the message, then press the OK button. When the screen to select the operation is displayed, select one of the operations below. Note • Depending on the setting, the choices below may not be displayed. Use cass. settings Select if you want to print on the paper loaded in the cassette without changing the paper settings.
Troubleshooting The Printer Cannot Be Powered On Printing Does Not Start Paper Does Not Feed Properly/"No Paper" Error Occurs Print Results Not Satisfactory Ink Is Not Ejected Paper Jams If an Error Occurs Search Each Function Problems with Network Communication Problems with Printing Problems with Printing Quality Problems with the Printer Problems with Installation/Downloading About Errors/Messages Displayed If You Cannot Resolve the Problem 336
Problems with Network Communication Problems with the Printer While Using with Network Cannot Detect a Printer on a Network Other Problems with Network 337
Problems with the Printer While Using with Network The Printer Stopped Working Suddenly Printing Speed Is Slow Cannot Use the Printer on Replacing an Access Point or Changing Its settings 338
The Printer Stopped Working Suddenly Cannot Communicate with the Printer over the Wireless LAN Cannot Communicate with the Printer Using the Access Point Mode Cannot Communicate with the Printer over the Wired LAN Cannot Print from a Computer Connected to the Network Cannot Communicate with the Printer over the Wireless LAN Check1 Make sure that the printer is turned on. Make sure that the network settings in the printer are identical with those of the access point.
Check9 Make sure that the channel confirmed in Check 8 can communicate with the computer. If not, change the channel set to the access point. Check10 Make sure that the firewall of the security software is disabled. If the firewall function of your security software is turned on, a message may appear warning that Canon software is attempting to access the network. If the warning message appears, set the security software to always allow access.
Check7 Make sure that there is no source of radio wave interference in your vicinity. If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby, the device may cause interference. Place the wireless station as far away from the interference source as possible. Check8 Are you trying to connect 6 devices or more? You can connect up to 5 devices using the access point mode.
Printing Speed Is Slow Check1 The printer may be printing out a large job issued from another computer. Check2 When using wireless LAN, make sure that the radio status is good and adjust the installation positions while monitoring the radio status with IJ Network Tool. Monitoring Wireless Network Status Make sure that there is no barrier or obstacle between the access point and the printer. Wireless communication between different rooms or floors is generally poor.
Cannot Use the Printer on Replacing an Access Point or Changing Its settings When you replace an access point, perform network setup of the printer again. Perform network setup again according to the instructions on our website. If the problem is not resolved, see below.
When Encryption Is Enabled, Cannot Communicate With the Printer After the Encryption Type Was Switched on the Access Point If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer and the access point matches that set to the printer.
Cannot Detect a Printer on a Network Cannot Detect the Printer When Setting up Network Communication The Printer Cannot Be Detected in the Wireless LAN The Printer Cannot Be Detected in the Wired LAN Note • You cannot use the wireless LAN and the wired LAN at the same time.
Cannot Detect the Printer When Setting up Network Communication If the printer could not be detected on the network when setting up the network communication, confirm the network settings before redetecting the printer. Cannot Detect the Printer during Wireless LAN Setup: Check 1 Cannot Detect the Printer during Wired LAN Setup: Check 1 Important • If the printer cannot be detected while you are setting up the network communication using a USB cable, the printer may be in the access point mode.
Cannot Detect the Printer during Wireless LAN Setup: Check 1 Are the printer and network device (router, access point, etc.) turned on? Make sure that the printer is turned on. Confirming that the Power Is On Make sure that the network device (router, access point, etc.) is turned on. If the printer or the network device is turned off: Turn on the printer or the network device. After turning on the printer or the network device, it may take some time until ready for use.
Cannot Detect the Printer during Wireless LAN Setup: Check 2 Is the wireless LAN setting of the printer enabled? Make sure that the or icon is displayed on the LCD. If the icon is not displayed: The wireless LAN setting of the printer is disabled. Enable the wireless LAN setting of the printer. After enabling the wireless LAN setting, click Back to Top on the Check Printer Settings screen to try to set up the network communication from the beginning. If the icon is displayed: Go to check 3.
Cannot Detect the Printer during Wireless LAN Setup: Check 3 Is the printer connected to the access point? By using the icon on the LCD, make sure that the printer is connected to the access point. If the icon is displayed: The printer may be placed far away from the access point. Place the printer near the access point temporarily, then click Redetect on the Check Printer Settings screen.
Cannot Detect the Printer during Wireless LAN Setup: Check 4 Does the firewall function of your security software or operation system for computer interfere with setting up the network communication? The firewall function of your security software or operation system for computer may limit communications between the printer and your computer. Confirm the setting of firewall function of your security software or operation system or the message appearing on your computer.
Cannot Detect the Printer during Wireless LAN Setup: Check 5 Check the settings of the access point. Check the settings of the access point for the network connection such as IP address filtering, MAC address filtering, or DHCP function. Make sure that the radio channel of the access point and that assigned to the printer are the same. For details on how to check the settings of the access point, refer to the instruction manual supplied with the access point or contact its manufacturer.
Cannot Detect the Printer during Wired LAN Setup: Check 1 Is the LAN cable connected, and are the printer and the router turned on? Make sure that the LAN cable is connected. Make sure that the printer is turned on. Confirming that the Power Is On Make sure that the router is turned on. If the LAN cable is connected and the printer or the network device is turned off: Turn on the printer or the network device. After turning on the printer or the network device, it may take some time until ready for use.
Cannot Detect the Printer during Wired LAN Setup: Check 2 Are the computer and the router configured and can the computer connect to the network? Make sure that you can view web pages on your computer. If you cannot view any web pages: Click Cancel on the Check Printer Settings screen to cancel to set up the network communication. After that, configure the computer and network device.
Cannot Detect the Printer during Wired LAN Setup: Check 3 Enable the wired LAN setting of the printer. Press the Setup button, then select Device settings and LAN settings in this order, then select Wired LAN active for Change LAN. The icon is displayed on the LCD.
The Printer Cannot Be Detected in the Wireless LAN Check1 Make sure that the printer is turned on. Check2 Is Change LAN in LAN settings under Device settings set to LAN inactive? Check3 When the printer is connected to the computer temporarily using a USB cable, make sure that the USB cable is connected properly.
Check11 Make sure that the firewall of the security software is disabled. If the firewall function of your security software is turned on, a message may appear warning that Canon software is attempting to access the network. If the warning message appears, set the security software to always allow access. If using any programs that switch the network environment, check their settings. Some programs will enable a firewall by default.
The Printer Cannot Be Detected in the Wired LAN Check1 Make sure that the printer is turned on. Check2 Is Change LAN in LAN settings under Device settings set to LAN inactive? LAN settings Check3 Make sure that the LAN cable is connected properly. Make sure that the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the cable properly. If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.
Other Problems with Network Forgot an Access Point Name, SSID, or a Network Key The Message Is Displayed on the Computer Screen During Setup The Administrator Password Set to the Printer Was Forgotten Checking Information about the Network How to Restore the Printer's Network Settings to Factory Default 358
Forgot an Access Point Name, SSID, or a Network Key Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or WPA/WPA2 Key) How to Set an Encryption Key Cannot Connect with an Access Point to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP or WPA/WPA2 Key) For information on how to set up the access point, refer to the instruction manual provided with the access point or contact its manufacturer.
• Select 1 for Key ID:. Otherwise your computer will not be able to communicate with the printer via the access point. • When using WPA/WPA2 The authentication method, passphrase, and dynamic encryption type must match on the access point, the printer, and the computer. Enter the passphrase configured on the access point (a sequence of between 8 and 63 alphanumeric characters, or a 64-character hexadecimal number).
The Message Is Displayed on the Computer Screen During Setup The Enter Password Screen Is Displayed During Setup The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points Screen "You are connecting the printer to the non encrypted wireless network" Is Displayed The Enter Password Screen Is Displayed During Setup The following screen is displayed if an administrator password is set to the printer which has already been set up to use via a network.
"You are connecting the printer to the non encrypted wireless network" Is Displayed Security is not configured on the access point. The printer can still be used, so continue the setup procedure to complete it. Important • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
The Administrator Password Set to the Printer Was Forgotten Initialize the printer settings. Select All data, then the administrator password reverts to the default. Reset setting After initializing the printer settings, perform setup according to the instructions on our website.
Checking Information about the Network Checking the IP Address or the MAC Address of the Printer Checking the IP Address or the MAC Address of the Computer Checking If the Computer and the Printer, or Computer and the Access Point Can Communicate Checking the Network Setting Information Checking the IP Address or the MAC Address of the Printer To check the IP address or the MAC address of the printer, print out the network setting information using the operation panel of the printer.
Click Ethernet, then see Ethernet ID to confirm the MAC address. Checking If the Computer and the Printer, or Computer and the Access Point Can Communicate To check that communication is available, perform the ping test. 1. Open the Utilities folder in the Applications folder. 2. Start Network Utility. 3. Click the Ping button. 4. Make sure that Send only XX pings (XX are numbers) is selected. 5. Enter the IP address of the target printer or the target access point in Enter the network address to ping..
How to Restore the Printer's Network Settings to Factory Default Important • Note that initialization erases all network settings on the printer, and printing operation from a computer over network may become impossible. To use the printer over network, perform setup according to the instructions on our website. Select Reset LAN settings on the operation panel of the printer to initialize the network setting.
Problems with Printing Printing Does Not Start Paper Jams Paper Does Not Feed Properly/"No Paper" Error Occurs Cannot Print Properly with Automatic Duplex Printing Printing Stops Before It Is Completed 367
Printing Does Not Start Make sure that the power plug is securely plugged in, then press the ON button Check1 to turn the printer on. While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and remains lit. Note • When printing large data such as a photo or graphics, it may take longer to start printing. While the POWER lamp is flashing, the computer is processing data and sending it to the printer. Wait until printing starts.
Check6 Make sure that your printer's name is selected in the Print dialog. The printer will not print properly if you are using a printer driver for a different printer. Make sure that your printer's name is selected in Printer in the Print dialog. Note • To make the printer the one selected by default, select the printer for Default printer. Check7 Restart your computer.
Paper Jams When paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. • When a Support Code and a message are displayed on the computer screen: * The screen differs depending on the OS you are using. • When a Support Code and a message are displayed on the LCD: For details on how to remove the jammed paper, refer to Support Code List (When Paper Is Jammed).
Paper Does Not Feed Properly/"No Paper" Error Occurs Check1 Make sure that paper is loaded. Loading Paper Check2 Make sure of the following when you load paper. • When loading two or more sheets of paper, flip through the paper before loading. In addition, when you load paper with some paper remaining in the cassette, flip through the remaining paper and the newly loaded paper before loading. • When loading two or more sheets of paper, align the edges of the sheets before loading.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly. Confirm that the media type and the paper size settings correspond with the loaded paper. Check5 Check6 Clean the paper feed roller. Cleaning the Paper Feed Roller Note • Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Cannot Print Properly with Automatic Duplex Printing Check1 Is the setting for automatic duplex printing selected? Make sure that the Two-Sided check box is selected on the Print dialog. Duplex Printing Check2 Make sure that the actual size of the paper is suitable for automatic duplex printing. The sizes of media suitable for automatic duplex printing are A4 and Letter. Load paper of suitable size, then press the OK button on the printer. Check3 Make sure that the paper size setting is correct.
Printing Stops Before It Is Completed Check1 Is the paper loaded? Make sure that paper is loaded. If the printer has run out of paper, load paper. Check2 Do the printing documents have lots of photographs or illustrations? As printing large data such as photos or graphics takes time for the printer and the computer to process, the printer may appear to have stopped operating. In addition, when printing data that uses a large amount of ink continuously on plain paper, the printer may pause temporarily.
Problems with Printing Quality Print Results Not Satisfactory Ink Is Not Ejected 375
Print Results Not Satisfactory If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the paper and print quality settings first. Check1 Do the page size and media type settings match the size and type of the loaded paper? When these settings are incorrect, you cannot obtain a proper print result. If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality of the printout color.
Cannot Print to End of Job Check Is the space of your computer's hard disk sufficient? Delete unnecessary files to free disk space.
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks No Printing Results Printing Is Blurred Colors Are Wrong 378
White Streaks Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Check the status of ink tanks. Replace the ink tank if the ink has run out. Replacing an Ink Tank Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning. Check3 Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Lines Are Misaligned Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Perform Print Head Alignment. If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note • If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment manually referring to Aligning the Print Head Position Manually from Your Computer.
Printed Paper Curls or Has Ink Blots Printed Paper Has Ink Blots Printed Paper Curls Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 If the intensity is set high, reduce the intensity setting and try printing again. If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion. You can confirm the intensity using the printer driver.
Paper Is Smudged/Printed Surface Is Scratched Paper Is Smudged The Edges of Paper Are Smudged Printed Surface Is Smudged Printed Surface Is Scratched Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Is the appropriate type of paper used? Check to see if the paper you are printing on is suitable for your printing purpose. Media Types You Can Use Check3 Load the paper after correcting its curl.
1. Roll up the paper in the opposite direction to the paper curl as shown below. 2. Check that the paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward. In such cases, follow the procedure described below to curl the paper outward within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.
If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion. Reduce the intensity setting in the printer driver and try printing again. 1. Open the Print dialog. How to Open the Printer Driver Setup Window 2. Select Color Options in the pop-up menu. 3. Drag the Intensity slide bar to set the intensity.
Back of the Paper Is Smudged Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Perform the Bottom Plate Cleaning to clean the inside of the printer. Cleaning the Inside of the Printer (Bottom Plate Cleaning) Note • When performing duplex printing or too much printing, the inside may become stained with ink.
Colors Are Uneven or Streaked Colors Are Uneven Colors Are Streaked Check1 Did you confirm the paper and print quality settings? Print Results Not Satisfactory Check2 Print the Nozzle Check Pattern and perform any necessary maintenance operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
If Print Head Deep Cleaning does not resolve the problem, the print head may be damaged. Contact the service center. Check3 Perform Print Head Alignment. Aligning the Print Head Note • If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment manually referring to Aligning the Print Head Position Manually from Your Computer.
Ink Is Not Ejected Check1 Has the ink run out? Check the Support Code on the LCD and take the appropriate action to resolve the error. Support Code List Check2 Are the print head nozzles clogged? Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
Problems with the Printer The Printer Cannot Be Powered On The Printer Turns Off Unintentionally Cannot Connect to Computer with a USB Cable Properly Cannot Communicate with the Printer with USB Connection LCD Cannot Be Seen At All An Unintended Language Is Displayed on the LCD Print Head Holder Does Not Move to the Position for Replacing 389
The Printer Cannot Be Powered On Check1 Press the ON button. Check2 Make sure that the power plug is securely plugged into the power cord connector of the printer, then turn it back on. Check3 Unplug the printer from the power supply, then plug the printer back in and turn the printer back on after leaving it for at least 2 minutes. If the problem is not resolved, contact the service center.
The Printer Turns Off Unintentionally Check Deactivate the setting to turn the unit off automatically. The printer turns off automatically according to the elapsed time you specified if you activate the setting to turn the unit off automatically. If you do not want the printer to turn off automatically, open Canon IJ Printer Utility, select Power Settings in the pop-up menu, then select Disable for Auto Power Off on Auto Power.
Cannot Connect to Computer with a USB Cable Properly Printing Speed Is Slow/Hi-Speed USB Connection Does Not Work If your system environment is not fully compatible with Hi-Speed USB, the printer will operate at a lower speed provided under USB 1.1. In this case, the printer operates properly but printing speed may slow down due to communication speed. Check the following to make sure that your system environment supports HiSpeed USB connection.
Cannot Communicate with the Printer with USB Connection Check1 Make sure that the printer is turned on. Check2 Make sure that the USB cable is connected properly. See Connecting the Printer to the Computer Using a USB Cable to connect the USB cable properly. Check3 Do not start up IJ Network Tool while printing. Check4 Do not print while IJ Network Tool is running.
LCD Cannot Be Seen At All • If the POWER lamp is off: The printer is not powered on. Connect the power cord and press the ON button. • If the POWER lamp is lit: The LCD may be in the screen-saver mode. Press one of the buttons on the operation panel.
An Unintended Language Is Displayed on the LCD Select the language you want to be displayed according to the following procedure. 1. Press the Setup button, then wait for about 5 seconds. 2. Press the button once, then press the OK button. 3. Press the button twice, then press the OK button. 4. Press the OK button again. 5. Use the button to select the language for the LCD, then press the OK button. The desired language is displayed on the LCD.
Print Head Holder Does Not Move to the Position for Replacing Important • The print head holder moves to the position for replacing only when an ink tank runs out of ink. If no ink tanks run out of ink, the print head holder does not move even though you open the front cover. Check1 Is the POWER lamp off? Check if the POWER lamp is lit. The print head holder will not move unless the power is on. If the POWER lamp is off, close the front cover and turn the printer on.
Problems with Installation/Downloading Cannot Install the Printer Driver Uninstalling IJ Network Tool 397
Cannot Install the Printer Driver Download the driver from the support page of our website, then reinstall it.
Uninstalling IJ Network Tool Follow the procedure below to uninstall IJ Network Tool from your computer. Important • Even if IJ Network Tool is uninstalled, you can print over network. However, you cannot change the network settings over network. 1. Select Applications from the Go menu of Finder, double-click Canon Utilities > IJ Network Tool, drag the Canon IJ Network Tool icon into the Trash. 2. Restart the computer. Empty the Trash and restart your computer.
About Errors/Messages Displayed If an Error Occurs A Message Is Displayed 400
If an Error Occurs When an error occurs in printing such as the printer is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, a Support Code (error number) is displayed on the computer screen or the LCD. • When a Support Code and a message are displayed on the computer screen: * The screen differs depending on the OS you are using.
A Message Is Displayed This section describes some of the errors or messages. Note • A Support Code (error number) is displayed on the computer or on the LCD for some error or message. For details on errors with Support Codes, refer to Support Code List. If a message is displayed on the LCD, see below. • A Message Is Displayed on the LCD If a message is displayed on the computer, see below.
• If you agree to participate in the survey program: Click Agree, then follow the on-screen instructions. The printer usage information will be sent via the Internet. If you have followed the on-screen instructions, the information will be sent automatically from the second time onward and the confirmation screen will not be displayed again.
3. Place the Canon Inkjet Printer/Scanner/Fax Extended Survey Program.app file into the Trash. 4. Restart the computer. Empty the Trash and restart your computer. • Changing the setting: To display the confirmation screen every time the printer usage information is sent or to resume surveying, follow the procedure below. 1. Select Applications from the Go menu of Finder, and double-click the Canon Utilities folder, then the Inkjet Extended Survey Program folder. 2.
If You Cannot Resolve the Problem If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of the printer or the service center. Canon support staff are trained to be able to provide technical support to satisfy customers. Caution • If the printer emits any unusual sound, smoke, or odor, turn it off immediately. Unplug the power cord from the outlet and contact the seller or the service center. Never attempt to repair or disassemble the printer yourself.
Support Code List The support code appears on the LCD and the computer screen when an error occurs. "Support Code" means the error number and appears with an error message. When an error occurs, check the support code displayed on the LCD or the computer screen and take the appropriate action.
7205 7300 • A000 to ZZZZ B202 B203 B204 B502 B503 B504 C000 About the support code for paper jam, you can also refer to Support Code List (When Paper Is Jammed).
Support Code List (When Paper Is Jammed) If the paper is jammed, remove it following the procedure appropriate for each case.
1300 Cause Paper is jammed inside the front cover. Action If the paper is jammed inside the front cover, remove the paper following the procedure below. Note • If you need to turn off the printer to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the printer. 1. Open the front cover. Important • Do not touch the clear film (A) or the white belt (B). If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged. 2.
If the paper is rolled up, pull it out. 4. Pull the paper slowly not to tear it, then pull the paper out. 5. Make sure that all the jammed paper is removed. If the paper is torn, a piece of paper may remain inside the printer. Check the following and remove the piece of paper if it remains.
6. Close the front cover. 7. Press the printer's OK button. If you turned off the printer, all print jobs in the queue are canceled. Reprint if necessary. Note • When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly. Align the paper guides with the both edges of the paper when you load paper.
1303 Cause Paper is jammed inside the rear cover. Action If the paper is jammed inside the rear cover, remove the paper following the procedure below. Note • If you need to turn off the printer to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the printer. 1. Rotate the printer so that the rear side of the printer faces toward you. 2. If the protective material for the rear cover remains attached, remove it. 3. Open the rear cover.
Note • Do not touch the inner parts of the printer. • If you cannot pull the paper out, try the following. • Turn the printer off and turn it back on. The paper may be ejected automatically. • Pull out the paper output tray. It becomes easy to pull out the paper. 5. Close the rear cover slowly. Close the rear cover then slide it to the right. Slide the rear cover so that the mark on the rear cover aligns with the mark on the printer. 6. Reload the paper, then press the printer's OK button.
1313 Cause Paper is jammed inside the rear cover as the printer pulled in the printed paper. Action If the paper is jammed inside the rear cover as the printer pulled in the printed paper, remove the paper following the procedure below. Important • If the printed paper piles up on the paper output slot, the printer may pull it in and the paper is jammed inside the printer. Remove the printed paper from the paper output tray before it amounts to 75 sheets.
4. Pull out the paper slowly. Note • Do not touch the inner parts of the printer. • If you cannot pull the paper out, try the following. • Turn the printer off and turn it back on. The paper may be ejected automatically. • Pull out the paper output tray. It becomes easy to pull out the paper. 5. Close the rear cover slowly. Close the rear cover then slide it to the right. Slide the rear cover so that the mark on the rear cover aligns with the mark on the printer. 6.
Align the paper guides with the both edges of the paper when you load paper. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the service center.
1314 Cause Paper is jammed inside the rear cover when performing automatic duplex printing. Action If the paper is jammed inside the rear cover when performing automatic duplex printing, remove the paper following the procedure below. Note • If you need to turn off the printer to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the printer. 1. Rotate the printer so that the rear side of the printer faces toward you. 2.
Note • Do not touch the inner parts of the printer. • If you cannot pull the paper out, try the following. • Turn the printer off and turn it back on. The paper may be ejected automatically. • Pull out the paper output tray. It becomes easy to pull out the paper. 5. Close the rear cover slowly. Close the rear cover then slide it to the right. Slide the rear cover so that the mark on the rear cover aligns with the mark on the printer. 6. Reload the paper, then press the printer's OK button.
In Other Cases Make sure of the following: Check1 Are there any foreign objects around the paper output slot? Check2 Are the rear cover attached properly? Check3 Is the paper curled? Load the paper after correcting its curl.
1007 Cause Possible causes include the following. • There is no paper in the cassette 1. • Paper is not loaded in the cassette 1 properly. Action Take the corresponding actions below. • Load paper in the cassette 1. • Align the paper guides with the both edges of the paper when you load paper in the cassette 1. After carrying out the above measures, press the OK button to dismiss the error. Note • The loadable paper differs depending on the paper source.
1008 Cause Possible causes include the following. • There is no paper in the cassette 2. • Paper is not loaded in the cassette 2 properly. Action Take the corresponding actions below. • Load paper in the cassette 2. • Align the paper guides with the both edges of the paper when you load paper in the cassette 2. After carrying out the above measures, press the OK button to dismiss the error. Important • The loadable paper differs depending on the paper source.
1200 Cause The front cover is open. Action Close the front cover and wait for a while. Do not close it while you are replacing an ink tank.
1310 Cause The size of paper may not be compatible with automatic duplex printing. Action The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure that the size of the paper loaded in the printer is correct. Pressing the OK button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.
1575 Cause Ink cannot be correctly detected. Action If an ink tank becomes empty, replace it. An ink tank cannot be replaced until it becomes empty. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.
1600 Cause Ink may have run out. Action Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the machine's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition. Important • Do not remove an ink tank until a new one is prepared to be installed.
1660 Cause The ink tank is not installed. Action Install the ink tank.
1688 Cause The ink has run out. Action Replace the ink tank and close the front cover. Printing under the current condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized.
1700 Cause The ink absorber is almost full. Action Press the printer's OK button to continue printing. Contact the service center.
1701 Cause The ink absorber is almost full. Action Press the printer's OK button to continue printing. Contact the service center.
1754 Cause The ink tank is not installed properly. Action Open the front cover. Then push the ink tank. After installing the ink tank properly, close the front cover. If the problem is not resolved, contact the service center. Important • The ink tank that was once installed cannot be removed until the ink runs out.
1755 Cause The ink has run out. Action To maintain both machine and print quality, the machine cannot continue printing under the ink out condition. Cancel printing and replace the ink tank before printing again. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.
1872 Cause The cassette 1 is not inserted. Action Insert the cassette 1. Note • The cassette paper information registration screen is displayed after inserting the cassette 1. Register the cassette paper information according to the paper you loaded in the cassette 1. • If you want to cancel printing, press the printer's Stop button.
1873 Cause The cassette 2 is not inserted. Action Insert the cassette 2. Note • The cassette paper information registration screen is displayed after inserting the cassette 2. Register the cassette paper information according to the paper you loaded in the cassette 2. • If you want to cancel printing, press the printer's Stop button.
1874 Cause The cassette 1 and the cassette 2 are not inserted. Action Insert the both cassettes. Note • The cassette paper information registration screen is displayed after inserting the cassettes. Register the cassette paper information according to the paper you loaded in the cassette 1 and the cassette 2. • If you want to cancel printing, press the printer's Stop button.
1890 Cause The protective material for the print head holder or the tape may remain attached to the holder. Action Open the front cover, then confirm that the protective material or the tape does not remain attached to the print head holder. If you find the protective material or the tape remains attached, remove it, then close the front cover. If the problem is not resolved, contact the service center.
2111 Cause The paper settings for printing are different from the cassette paper information registered to the printer.
Replace the paper Select if you want to print after replacing the paper of the cassette 1. For example, when the paper setting for printing is B5 and the cassette paper information registered to the printer is A4, you load B5 sized paper in the cassette 1 before you start printing. The cassette paper information registration screen is displayed after replacing the paper and inserting the cassette 1. Register the cassette paper information according to the paper you loaded in the cassette 1.
2112 Cause The paper settings for printing are different from the cassette paper information registered to the printer.
Replace the paper Select if you want to print after replacing the paper of the cassette 2. For example, when the paper setting for printing is A4 and the cassette paper information registered to the printer is Legal, you load A4 sized paper in the cassette 2 before you start printing. The cassette paper information registration screen is displayed after replacing the paper and inserting the cassette 2. Register the cassette paper information according to the paper you loaded in the cassette 2.
2113 Cause The paper settings for printing are different from the cassette paper information registered to the printer.
For example, when the paper setting for printing is A4 and the cassette paper information registered to the printer is Legal, the printer starts printing with A4 on the paper loaded in the cassette 1 and the cassette 2. Replace the paper Select if you want to print after replacing the paper of the cassette 1 and the cassette 2.
2121 Cause The paper settings of the cassette 1 is not complete. Action If the following screen is displayed, the paper settings of the cassette 1 is not complete. Press the printer's OK button to terminate the paper settings of thecassette.
2122 Cause The paper settings of the cassette 2 is not complete. Action If the following screen is displayed, the paper settings of the cassette 2 is not complete. Press the printer's OK button to terminate the paper settings of thecassette.
2500 Cause The cause of following may have occurred the failure of Automatic Print Head Alignment. • Print head nozzles are clogged. • The paper of size other than A4 or Letter is loaded in the cassette 1. • The paper output slot is exposed to strong light. Action Press the printer's OK button to dismiss the error, then take the actions described below. • Print the nozzle check pattern to check the status of the print head.
4100 Cause The specified data cannot be printed. Action When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer screen, make sure that genuine Canon ink tanks are installed properly for all colors, then start printing again.
4103 Cause Cannot perform printing with the current print settings. Action Press the printer's Stop button to cancel printing. Then change the print settings and print again.
4104 Cause The paper size or the media type that cannot be fed from the cassette 2 is specified. Action Press the printer's Stop button to cancel printing. Specify the paper size setting to A4, Letter, or Legal and specify the media type setting to Plain Paper. Then print again. Note • If you will not change the paper size setting or the media type setting, select the cassette 1 as the paper source. If this is the case, register the cassette 1 paper information properly.
5100 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
5102 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
5103 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
5104 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
5105 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
5200 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5203 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5204 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5205 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5206 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5207 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5208 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5209 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5400 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
5500 Cause Ink tank has not been properly recognized. Action Contact the service center.
5501 Cause Ink tank has not been properly recognized. Action Contact the service center.
5B00 Cause Printer error has occurred. Action Contact the service center.
5B01 Cause Printer error has occurred. Action Contact the service center.
5C01 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6000 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6500 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6502 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6800 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6801 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6900 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6901 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6902 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6910 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6911 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6920 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6921 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6930 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6931 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6932 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6933 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6940 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6941 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6942 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6943 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6944 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6945 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
6946 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7100 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7200 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7201 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7202 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7203 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7204 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7205 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
7300 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
B202 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Contact the service center.
B203 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Contact the service center.
B204 Cause An error requiring you to contact the service center has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Contact the service center.
B502 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
B503 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
B504 Cause Printer error has occurred. Action Turn off the printer, and unplug the power cord of the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem is not resolved, contact the service center.
C000 Cause Printer error has occurred. Action Cancel printing and turn off the printer. Then confirm the following. • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving. If any, remove the materials. • Confirm that the ink tanks are installed properly. Push an ink tank until it clicks into place. After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
