User's Manual

• If you are unable to proceed beyond the Printer Connection screen:

Note

• The printer is not detected. Check the connection. may be displayed depending on the

computer you use.

Check1

Make sure that the USB cable is securely plugged in to the machine and the

computer.

Check2

Follow the procedure below to connect the machine and the computer

again.

Turn the machine off.

2. Unplug the USB cable from the machine and the computer, then connect it again.

3. Turn the machine on.

Check3

If you cannot resolve the problem, follow the procedure below to reinstall the

MP Drivers.

1. Click Cancel.

2. Click Start Over on the Installation Failure screen.

3. Click Exit on the "MAXIFY XXX" screen (where "XXX" is your machine's name), then remove the CD-

ROM.

4. Turn the machine off.

5. Restart the computer.

6. Make sure that you have no application software running.

Insert the CD-ROM again, then install the MP Drivers.

1024