User's Manual

9. Load only this sheet of paper in the cassette 1 with the ridges of the creases facing up and
the edge of the half with no crease facing to the far side.
Important
•
The cassette 2 is not available for the Bottom Plate Cleaning procedure. Be sure to load paper in
the cassette 1.
10.
Extend the output tray extension, then open the paper output support.
11.
Tap OK.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
12. When the completion message appears, tap OK.
Note
•
When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.
If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be
stained. Wipe off any ink from the protrusions using a cotton swab or the like.
Important
• Be sure to turn off the power and unplug the power cord before cleaning the machine.
• The power cannot be turned off while the machine is sending or receiving a fax, or when unsent
faxes are stored in the machine's memory. Make sure if the machine completed sending or
receiving all the faxes before unplugging the power cord.
239